TuffServ® Encryption Module (TSEM)

Certificate details

Certificate ID #4938
Status active
Validation dates 07.01.2025
Sunset date 06-01-2027
Standard FIPS 140-3
Security level 2
Type Hardware
Embodiment Multi-Chip Embedded
Caveat Interim validation. No assurance of minimum security of SSPs (e.g., keys, bit strings) that are externally loaded, or of SSPs established with externally loaded SSPs
Exceptions
  • Operational environment: N/A
  • Non-invasive security: N/A
  • Life-cycle assurance: Level 3
  • Mitigation of other attacks: N/A
Description The Ampex TSEM hardware module provides two inline (“bump in the wire”) SATA encryptors running at 6Gbps. The paired encryptors support line rate performance with a very modest latency penalty. Using an intelligent secure microcontroller, the TSEM imposes few requirements or dependencies on the host platform, facilitating rolling software patches and without compromising the system design. The module is designed to operate over the industrial temperature range (components rated -40 to +85) and requires a dedicated carrier board to support cooling and physical security.
Vendor Ampex Data Systems Corporation http://www.ampex.com
Lab Acumen Security
Algorithms
  • AES-ECBA3009
  • AES-KWA2921
  • AES-XTS Testing Revision 2.0A2914
  • ECDSA SigVer (FIPS186-4)A2921
  • Hash DRBGA2921
  • HMAC-SHA2-384A2921
  • KDF SP800-108A2921
  • SHA2-256A2921
  • SHA2-384A2921
References

This certificate's webpage directly references 0 certificates, transitively this expands into 0 certificates.
Certificate
Webpage

Security policy

Extracted keywords

Symmetric Algorithms
AES, AES-256, CAST, HMAC
Asymmetric Algorithms
ECDSA
Hash functions
SHA-384
Schemes
MAC
Randomness
DRBG, RBG
Elliptic Curves
P-384
Block cipher modes
XTS

Trusted Execution Environments
PSP
Vendor
NXP

Security level
Level 2

Author Hawes, David J. (Fed)
Creation date D:20241115113403-05'00'
Modification date D:20241115113435-05'00'
Pages 24
Creator Acrobat PDFMaker 24 for Word
Producer Adobe PDF Library 24.3.144

Automated analysis

Automated inference - use with caution

All attributes shown in this section (e.g., links between certificates, products, vendors, and known CVEs) are generated by automated heuristics and have not been reviewed by humans. These methods can produce false positives or false negatives and should not be treated as definitive without independent verification. This applies equally to the Cross-references section below. If you want to know more about how this data is computed and how reliable it is, see our documentation on automated analysis. If you believe any information here is inaccurate or harmful, please submit feedback.

No automatically derived data are available in this section.

Cross-references

No references are available for this certificate.

Processing updates

  • The certificate data changed.
  • The certificate data changed.
  • The certificate data changed.
  • The certificate data changed.
  • The certificate data changed.
  • The certificate data changed.
  • The certificate data changed.
  • The certificate data changed.
  • The certificate was first processed.

Raw data

{
  "_type": "sec_certs.sample.fips.FIPSCertificate",
  "cert_id": 4938,
  "dgst": "4f692e0f26fb1fa5",
  "heuristics": {
    "_type": "sec_certs.sample.fips.FIPSCertificate.Heuristics",
    "algorithms": {
      "_type": "Set",
      "elements": [
        "AES-XTS Testing Revision 2.0A2914",
        "#A2914",
        "#A2921",
        "ECDSA SigVer (FIPS186-4)A2921",
        "KDF SP800-108A2921",
        "#A3009",
        "AES-ECBA3009",
        "AES-KWA2921",
        "SHA2-384A2921",
        "Hash DRBGA2921",
        "SHA2-256A2921",
        "HMAC-SHA2-384A2921"
      ]
    },
    "cpe_matches": null,
    "direct_transitive_cves": null,
    "extracted_versions": {
      "_type": "Set",
      "elements": [
        "-"
      ]
    },
    "indirect_transitive_cves": null,
    "module_processed_references": {
      "_type": "sec_certs.sample.certificate.References",
      "directly_referenced_by": null,
      "directly_referencing": null,
      "indirectly_referenced_by": null,
      "indirectly_referencing": null
    },
    "module_prunned_references": {
      "_type": "Set",
      "elements": []
    },
    "policy_processed_references": {
      "_type": "sec_certs.sample.certificate.References",
      "directly_referenced_by": null,
      "directly_referencing": null,
      "indirectly_referenced_by": null,
      "indirectly_referencing": null
    },
    "policy_prunned_references": {
      "_type": "Set",
      "elements": []
    },
    "related_cves": null,
    "verified_cpe_matches": null
  },
  "pdf_data": {
    "_type": "sec_certs.sample.fips.FIPSCertificate.PdfData",
    "br1_deviations": 0,
    "br1_tables": {
      "_type": "sec_certs.heuristics.br1.table_parsing.model.br1_tables.BR1Tables",
      "approved_algorithms": {
        "entries": [
          {
            "algorithm": "AES-XTS Testing Revision 2.0",
            "cavpCertName": "A2914",
            "properties": "Direction - Decrypt, Encrypt Key Length - 256",
            "reference": "SP 800-38E"
          },
          {
            "algorithm": "AES-ECB",
            "cavpCertName": "A2921",
            "properties": "Direction - Decrypt, Encrypt Key Length - 256",
            "reference": "SP 800-38A"
          },
          {
            "algorithm": "AES-KW",
            "cavpCertName": "A2921",
            "properties": "Direction - Decrypt, Encrypt Key Length - 256",
            "reference": "SP 800-38F"
          },
          {
            "algorithm": "AES-ECB",
            "cavpCertName": "A3009",
            "properties": "Direction - Decrypt, Encrypt Key Length - 128, 256",
            "reference": "SP 800-38A"
          },
          {
            "algorithm": "ECDSA SigVer (FIPS186-4)",
            "cavpCertName": "A2921",
            "properties": "Curve - P-384 Hash Algorithm - SHA2-384",
            "reference": "FIPS 186-4"
          },
          {
            "algorithm": "Hash DRBG",
            "cavpCertName": "A2921",
            "properties": "Prediction Resistance - No Mode - SHA2-256",
            "reference": "SP 800-90A Rev. 1"
          },
          {
            "algorithm": "HMAC-SHA2-384",
            "cavpCertName": "A2921",
            "properties": "Key Length - Key Length: 256",
            "reference": "FIPS 198-1"
          },
          {
            "algorithm": "KDF SP800-108",
            "cavpCertName": "A2921",
            "properties": "KDF Mode - Counter Supported Lengths - Supported Lengths: 256",
            "reference": "SP 800-108 Rev. 1"
          },
          {
            "algorithm": "SHA2-256",
            "cavpCertName": "A2921",
            "properties": "Message Length - Message Length: 256-2048 Increment 128",
            "reference": "FIPS 180-4"
          },
          {
            "algorithm": "SHA2-384",
            "cavpCertName": "A2921",
            "properties": "Message Length - Message Length: 256-2048 Increment 128",
            "reference": "FIPS 180-4"
          }
        ],
        "found": true,
        "section": 2,
        "subsection": 5
      },
      "approved_services": {
        "entries": [
          {
            "description": "Power-on initialization, including DRBG instantiate and Built-In Test (BIT) with CASTs and FW integrity.",
            "indicator": "None",
            "inputs": "None (automatic invocation at power-on / reset).",
            "name": "Initialize",
            "outputs": "CPSW (on first command)",
            "rolesSspAccess": "Unauthenticated - DRBG_EI: G,E,Z - DRBG_C: G,W - DRBG_V: G,W - DRBG_Seed: G,E,Z",
            "secFunImpl": "Random"
          },
          {
            "description": "Derive TIK from PIK. Use TIK to obtain KEK. Generate DEKs (compliant with SP800-133r2 CKG) and wrap using KEK. Return wrapped DEKs.",
            "indicator": "TSEM_STATUS_OK or error code",
            "inputs": "create_keys command packet, PIK, command signature.",
            "name": "create_keys",
            "outputs": "CPSW; eDEK",
            "rolesSspAccess": "CO - COA Public: E - PIK: W,E,Z - TIK: G,E,Z - TMK: G,E - KEK: G,E,Z - DRBG_C: W,E - DRBG_V: W,E - DEK: G,R,Z",
            "secFunImpl": "Cipher CKG Section 4 CKG Section 6.1 KTS Signature ECDSA Key derivation"
          },
          {
            "description": "Obtain a random value.",
            "indicator": "TSEM_STATUS_OK or error code",
            "inputs": "create_random command packet .",
            "name": "create_random",
            "outputs": "CPSW; random value",
            "rolesSspAccess": "Unauthenticated - DRBG_EI: G,E,Z - DRBG_C: G,W",
            "secFunImpl": "Random CKG Section 4"
          },
          {
            "description": "",
            "indicator": "",
            "inputs": "",
            "name": "",
            "outputs": "",
            "rolesSspAccess": "- DRBG_Seed: G,E,Z",
            "secFunImpl": ""
          },
          {
            "description": "Halt and reset SATA controllers. Destroy CSPs in local memory and NVM.",
            "indicator": "TSEM_STATUS_OK or error code",
            "inputs": "destroy command packet, command signature.",
            "name": "destroy",
            "outputs": "CPSW",
            "rolesSspAccess": "CO - COA Public: E,Z - DEK: Z - TMK: Z - DRBG_C: Z - DRBG_EI: Z - DRBG_Seed: Z - DRBG_V: Z - KEK: Z - PIK: Z - TIK: Z",
            "secFunImpl": "Signature ECDSA"
          },
          {
            "description": "Perform built-in test (including FIPS 140 self- tests).",
            "indicator": "TSEM_STATUS_OK or error code",
            "inputs": "do_bit command packet, self-test selection.",
            "name": "do_bit",
            "outputs": "CPSW; self-test results",
            "rolesSspAccess": "Unauthenticated",
            "secFunImpl": "None"
          },
          {
            "description": "Obtain status of the most recent built-in tests.",
            "indicator": "TSEM_STATUS_OK",
            "inputs": "get_bit_results command packet, self-test selection.",
            "name": "get_bit_results",
            "outputs": "CPSW; self-test results",
            "rolesSspAccess": "Unauthenticated",
            "secFunImpl": "None"
          },
          {
            "description": "Check TSEM responsiveness without performing an operation.",
            "indicator": "TSEM_STATUS_OK",
            "inputs": "nop command; no additional input.",
            "name": "nop",
            "outputs": "CPSW",
            "rolesSspAccess": "Unauthenticated",
            "secFunImpl": "None"
          },
          {
            "description": "Derive TIK from PIK. Wrap TMK using TIK. eTMK refers to the wrapped TMK.",
            "indicator": "TSEM_STATUS_OK or error code",
            "inputs": "provision command packet, PIK, TMK, command signature.",
            "name": "provision",
            "outputs": "CPSW",
            "rolesSspAccess": "CO - COA Public: E - PIK: W,E,Z - TIK: G,E,Z - TMK: W,Z",
            "secFunImpl": "Signature ECDSA Key derivation"
          },
          {
            "description": "Derive TIK from PIK. Use TIK to obtain KEK. Use KEK to unwrap DEK. Update SATA controller.",
            "indicator": "TSEM_STATUS_OK or error code",
            "inputs": "put_keys command packet, PIK, command signature.",
            "name": "put_keys",
            "outputs": "CPSW",
            "rolesSspAccess": "CO - COA Public: E - PIK: W,E,Z - TIK: G,E,Z - TMK: G,E - KEK: G,E,Z - DEK: G,R,Z",
            "secFunImpl": "Cipher CKG Section 4 CKG Section 6.1 KTS Signature ECDSA Key derivation"
          },
          {
            "description": "Reset the SATA controllers.",
            "indicator": "SATA_OK",
            "inputs": "SATA reset command.",
            "name": "SATA reset",
            "outputs": "CPSW.",
            "rolesSspAccess": "Unauthenticated",
            "secFunImpl": "None"
          },
          {
            "description": "Return status, name, version.",
            "indicator": "TSEM_STATUS_OK",
            "inputs": "This service is not authenticated per FIPS140-3_IG 4.1.A.",
            "name": "status",
            "outputs": "CPSW; TSEM name, status, version info",
            "rolesSspAccess": "Unauthenticated",
            "secFunImpl": "None"
          },
          {
            "description": "Read decrypted data from media.",
            "indicator": "SATA_OK or error code",
            "inputs": "SATA read command input.",
            "name": "read",
            "outputs": "SATA response, data from storage",
            "rolesSspAccess": "User - DEK: E",
            "secFunImpl": "Cipher"
          },
          {
            "description": "Write encrypted data to media.",
            "indicator": "SATA_OK or error code",
            "inputs": "SATA write command input, data to storage.",
            "name": "write",
            "outputs": "SATA response",
            "rolesSspAccess": "User - DEK: E",
            "secFunImpl": "Cipher"
          },
          {
            "description": "Non-cryptographic SATA commands.",
            "indicator": "SATA_OK or error code",
            "inputs": "SATA media control command input.",
            "name": "Media control",
            "outputs": "SATA response",
            "rolesSspAccess": "Unauthenticated",
            "secFunImpl": "None"
          }
        ],
        "found": true,
        "section": 4,
        "subsection": 3
      },
      "authentication_methods": {
        "entries": [
          {
            "description": "Receipt of PIK by a provisioned TSEM provides role-based authentication of an operator in the User role. The 256-bit PIK is used to derive the 256-bit TIK, which in turn is used to unwrap the TMK. Success of the TMK key unwrap authenticates the caller and unlocks the TSEM, moving it to the Operational state.",
            "mechanism": "KDF SP800- 108",
            "name": "PIK Provided",
            "perMinute": "(60*100,000,000)/(2^256) = 5.2E-70",
            "strength": "1/(2^256) = 8.6E-78"
          },
          {
            "description": "Verification of signed command (ECDSA P-384 / SHA-384). All commands that require CO authentication include a corresponding authentication block (signature value) in the command. The value must be verified for the command to be executed.",
            "mechanism": "Signature ECDSA",
            "name": "Signature Verification",
            "perMinute": "(60*100,000,000)/(2^192) = 9.6E-51",
            "strength": "1/(2^192) = 1.6E-58"
          }
        ],
        "found": true,
        "section": 4,
        "subsection": 1
      },
      "cond_self_tests": {
        "entries": [
          {
            "algorithmOrTest": "AES-XTS Testing Revision 2.0",
            "condition": "Performed on module load.",
            "details": "Encrypt",
            "indicator": "TSEM_STATUS_OK",
            "testMethod": "KAT",
            "testProps": "256-bit",
            "type": "CAST"
          },
          {
            "algorithmOrTest": "AES-XTS Testing Revision 2.0",
            "condition": "Performed on module load.",
            "details": "Decrypt",
            "indicator": "TSEM_STATUS_OK",
            "testMethod": "KAT",
            "testProps": "256-bit",
            "type": "CAST"
          },
          {
            "algorithmOrTest": "AES-KW",
            "condition": "Performed on module load.",
            "details": "Forward cipher",
            "indicator": "TSEM_STATUS_OK",
            "testMethod": "KAT",
            "testProps": "256-bit",
            "type": "CAST"
          },
          {
            "algorithmOrTest": "AES-KW",
            "condition": "Performed on module load.",
            "details": "Inverse cipher",
            "indicator": "TSEM_STATUS_OK",
            "testMethod": "KAT",
            "testProps": "256-bit",
            "type": "CAST"
          },
          {
            "algorithmOrTest": "ECDSA SigVer (FIPS186-4)",
            "condition": "Performed on module load prior to firmware integrity test.",
            "details": "Signature verification",
            "indicator": "TSEM_STATUS_OK",
            "testMethod": "KAT",
            "testProps": "P-384 SHA2- 384",
            "type": "CAST"
          },
          {
            "algorithmOrTest": "Hash DRBG",
            "condition": "Performed on module load.",
            "details": "Instantiate, generate, reseed",
            "indicator": "TSEM_STATUS_OK",
            "testMethod": "KAT",
            "testProps": "SHA2-256",
            "type": "CAST"
          },
          {
            "algorithmOrTest": "KDF SP800-108",
            "condition": "Performed on module load.",
            "details": "SP800-108r1 Section 4.1 KAT for a Counter Mode KDF",
            "indicator": "TSEM_STATUS_OK",
            "testMethod": "KAT",
            "testProps": "HMAC-SHA2- 384",
            "type": "CAST"
          },
          {
            "algorithmOrTest": "SHA2-384 (A2921)",
            "condition": "Performed on module load.",
            "details": "Hash",
            "indicator": "TSEM_STATUS_OK",
            "testMethod": "KAT",
            "testProps": "SHA2-384",
            "type": "CAST"
          },
          {
            "algorithmOrTest": "ENT (P) Self-tests",
            "condition": "Performed on module load, power cycle or do_bit service invocation.",
            "details": "90B Health Tests",
            "indicator": "TSEM_STATUS_OK",
            "testMethod": "CAST",
            "testProps": "90B Self-tests",
            "type": "CAST"
          }
        ],
        "found": true,
        "section": 10,
        "subsection": 2
      },
      "error_states": {
        "entries": [
          {
            "conditions": "one of the KATs fails or integrity test fails",
            "description": "Self-test failure error state If",
            "indicator": "Non-zero return status",
            "name": "ERROR state",
            "recoveryMethod": "Power-cycle"
          }
        ],
        "found": true,
        "section": 10,
        "subsection": 4
      },
      "mechanisms_actions": {
        "entries": [
          {
            "inspectFreq": "Seals should be inspected during maintenance operations and when circumstances dictate (e.g., if tampering is suspected).",
            "inspectGuidance": "The tamper seals are within recessed seal guides. Inspect tamper seals for evidence of lifted edges or excessive wear.",
            "mechanism": "Enclosure tamper seals (qty. 2)"
          }
        ],
        "found": true,
        "section": 7,
        "subsection": 1
      },
      "modes_of_operation": {
        "entries": [
          {
            "description": "Approved mode of operation",
            "name": "Approved Mode",
            "statusIndicator": "",
            "type": "Approved"
          }
        ],
        "found": true,
        "section": 2,
        "subsection": 4
      },
      "non_approved_allowed_NSC": {
        "entries": [],
        "found": false,
        "section": 2,
        "subsection": 5
      },
      "non_approved_allowed_algos": {
        "entries": [],
        "found": false,
        "section": 2,
        "subsection": 5
      },
      "non_approved_not_allowed": {
        "entries": [],
        "found": false,
        "section": 2,
        "subsection": 5
      },
      "non_approved_services": {
        "entries": [],
        "found": false,
        "section": 4,
        "subsection": 4
      },
      "ports_interfaces": {
        "entries": [
          {
            "data": "Proprietary control plane commands and responses to and from host (TSEM configuration and control). Does not respond as a general-purpose USB port.",
            "logicalInterface": "Data Input Data Output Control Input Status Output",
            "physicalPort": "P1: USB1.1 - full speed, 12 MB/s Dedicated Virtual Serial Port over USB."
          },
          {
            "data": "Data plane: interaction between host and drive media via controller. SATA commands/responses/status to/from host. Plaintext Data In/Out (from/to host). Ciphertext Data Out/In (to/from media).",
            "logicalInterface": "Data Input Data Output Control Input Control Output Status Output",
            "physicalPort": "P1: SATA III I/O"
          },
          {
            "data": "Low pulse results in TSEM reset.",
            "logicalInterface": "Control Input",
            "physicalPort": "P1: RESETN TSEM reset input, active low"
          },
          {
            "data": "N/A",
            "logicalInterface": "Power",
            "physicalPort": "P1: Power and ground connections"
          }
        ],
        "found": true,
        "section": 3,
        "subsection": 1
      },
      "roles": {
        "entries": [
          {
            "authMethodList": "Signature Verification",
            "name": "CO",
            "operatorType": "CO",
            "type": "Role"
          },
          {
            "authMethodList": "PIK Provided",
            "name": "User",
            "operatorType": "User",
            "type": "Role"
          }
        ],
        "found": true,
        "section": 4,
        "subsection": 2
      },
      "security_levels": {
        "entries": [
          {
            "level": "2",
            "section": "1",
            "title": "General"
          },
          {
            "level": "2",
            "section": "2",
            "title": "Cryptographic module specification"
          },
          {
            "level": "2",
            "section": "3",
            "title": "Cryptographic module interfaces"
          },
          {
            "level": "2",
            "section": "4",
            "title": "Roles, services, and authentication"
          },
          {
            "level": "2",
            "section": "5",
            "title": "Software/Firmware security"
          },
          {
            "level": "N/A",
            "section": "6",
            "title": "Operational environment"
          },
          {
            "level": "2",
            "section": "7",
            "title": "Physical security"
          },
          {
            "level": "N/A",
            "section": "8",
            "title": "Non-invasive security"
          },
          {
            "level": "2",
            "section": "9",
            "title": "Sensitive security parameter management"
          },
          {
            "level": "2",
            "section": "10",
            "title": "Self-tests"
          },
          {
            "level": "3",
            "section": "11",
            "title": "Life-cycle assurance"
          },
          {
            "level": "N/A",
            "section": "12",
            "title": "Mitigation of other attacks"
          },
          {
            "level": "2",
            "section": "",
            "title": "Overall Level"
          }
        ],
        "found": true,
        "section": 1,
        "subsection": 2
      },
      "self_tests": {
        "entries": [],
        "found": false,
        "section": 10,
        "subsection": 1
      },
      "ssp_io_methods": {
        "entries": [
          {
            "dest": "SoC FW NVM",
            "distribution": "N/A",
            "entry": "N/A",
            "format": "Plaintext",
            "name": "Ampex facility",
            "sfiAlgo": "",
            "source": "Entered in Ampex maintenance facility."
          },
          {
            "dest": "SATA CTL register",
            "distribution": "Automated",
            "entry": "Electronic",
            "format": "Encrypted",
            "name": "Encrypted input parameter",
            "sfiAlgo": "KTS",
            "source": "External source"
          },
          {
            "dest": "External source",
            "distribution": "Automated",
            "entry": "Electronic",
            "format": "Encrypted",
            "name": "Encrypted output parameter",
            "sfiAlgo": "KTS",
            "source": "SATA CTL register"
          },
          {
            "dest": "SoC RAM",
            "distribution": "Automated",
            "entry": "Electronic",
            "format": "Plaintext",
            "name": "Plaintext input parameter",
            "sfiAlgo": "",
            "source": "External source"
          }
        ],
        "found": true,
        "section": 9,
        "subsection": 2
      },
      "ssp_zeroization_methods": {
        "entries": [
          {
            "description": "Overwritten by zeros after use",
            "method": "After use",
            "operatorId": "Module code enforces zeroization after use",
            "rationale": "Overwritten with zeros"
          },
          {
            "description": "Overwritten by zeros upon loss of power",
            "method": "Power Cycle",
            "operatorId": "Operator can remove power from the module",
            "rationale": "Overwritten with zeros"
          },
          {
            "description": "Overwritten by zeros by Destroy service",
            "method": "Destroy",
            "operatorId": "Operator calls the destroy service",
            "rationale": "Overwritten with zeros"
          }
        ],
        "found": true,
        "section": 9,
        "subsection": 3
      },
      "storage_areas": {
        "entries": [
          {
            "description": "Firmware image stored in SoC Non-volatile memory (flash)",
            "name": "SoC FW NVM",
            "persistance": "Static"
          },
          {
            "description": "SoC RAM",
            "name": "SoC RAM",
            "persistance": "Dynamic"
          },
          {
            "description": "SATA CTL register",
            "name": "SATA CTL register",
            "persistance": "Dynamic"
          },
          {
            "description": "SoC CFG Non-volatile memory (flash)",
            "name": "SoC NVM",
            "persistance": "Static"
          }
        ],
        "found": true,
        "section": 9,
        "subsection": 1
      },
      "tested_module_id_hw": {
        "entries": [
          {
            "features": "N/A - only one TSEM model exists.",
            "fwVersion": "1.1.16",
            "hwVersion": "1320249-010 Rev A",
            "modelPartNum": "TSEM",
            "processors": "NXP K81 (ARM Cortex M4)"
          }
        ],
        "found": true,
        "section": 2,
        "subsection": 2
      },
      "tested_module_id_hw_hy": {
        "entries": [],
        "found": false,
        "section": 2,
        "subsection": 2
      },
      "tested_module_id_sw_fw_hy": {
        "entries": [],
        "found": false,
        "section": 2,
        "subsection": 2
      },
      "tested_op_env_sw_fw_hy": {
        "entries": [],
        "found": false,
        "section": 2,
        "subsection": 2
      },
      "vendor_affirmed_algos": {
        "entries": [
          {
            "algoPropList": "Key Type:Symmetric",
            "implName": "TSEM Cryptographic Library",
            "name": "CKG Section 4",
            "reference": "NIST, SP 800-133 Rev. 2"
          },
          {
            "algoPropList": "Key Type:Symmetric",
            "implName": "TSEM Cryptographic Library",
            "name": "CKG Section 6.1",
            "reference": "NIST, SP 800-133 Rev. 2"
          },
          {
            "algoPropList": "Key Type:Symmetric",
            "implName": "TSEM Cryptographic Library",
            "name": "CKG Section 6.2",
            "reference": "NIST, SP 800-133 Rev. 2"
          }
        ],
        "found": true,
        "section": 2,
        "subsection": 5
      },
      "vendor_affirmed_op_env_sw_fw_hy": {
        "entries": [],
        "found": false,
        "section": 2,
        "subsection": 2
      }
    },
    "is_br1_format": true,
    "keywords": {
      "asymmetric_crypto": {
        "ECC": {
          "ECDSA": {
            "ECDSA": 15
          }
        }
      },
      "certification_process": {},
      "cipher_mode": {
        "XTS": {
          "XTS": 6
        }
      },
      "cplc_data": {},
      "crypto_engine": {},
      "crypto_library": {},
      "crypto_protocol": {},
      "crypto_scheme": {
        "MAC": {
          "MAC": 1
        }
      },
      "device_model": {},
      "ecc_curve": {
        "NIST": {
          "P-384": 10
        }
      },
      "eval_facility": {},
      "fips_cert_id": {
        "Cert": {
          "#1": 3,
          "#2": 3
        }
      },
      "fips_certlike": {
        "Certlike": {
          "AES-256": 3,
          "SHA-384": 1,
          "SHA2- 384": 1,
          "SHA2-256": 5,
          "SHA2-384": 8
        }
      },
      "fips_security_level": {
        "Level": {
          "Level 2": 2
        }
      },
      "hash_function": {
        "SHA": {
          "SHA2": {
            "SHA-384": 1
          }
        }
      },
      "ic_data_group": {},
      "javacard_api_const": {},
      "javacard_packages": {},
      "javacard_version": {},
      "os_name": {},
      "pq_crypto": {},
      "randomness": {
        "PRNG": {
          "DRBG": 24
        },
        "RNG": {
          "RBG": 2
        }
      },
      "side_channel_analysis": {},
      "standard_id": {
        "FIPS": {
          "FIPS 140": 1,
          "FIPS 140-3": 31,
          "FIPS 180-4": 2,
          "FIPS 186-4": 1,
          "FIPS 198-1": 1,
          "FIPS186-4": 4
        },
        "ISO": {
          "ISO/IEC 19790:2012": 3
        },
        "NIST": {
          "SP 800-108": 2,
          "SP 800-133": 7,
          "SP 800-38A": 2,
          "SP 800-38E": 2,
          "SP 800-38F": 5,
          "SP 800-90A": 4,
          "SP 800-90B": 1
        }
      },
      "symmetric_crypto": {
        "AES_competition": {
          "AES": {
            "AES": 5,
            "AES-256": 3
          },
          "CAST": {
            "CAST": 20
          }
        },
        "constructions": {
          "MAC": {
            "HMAC": 1
          }
        }
      },
      "tee_name": {
        "AMD": {
          "PSP": 1
        }
      },
      "tls_cipher_suite": {},
      "vendor": {
        "NXP": {
          "NXP": 1
        }
      },
      "vulnerability": {}
    },
    "module_algorithms": {
      "_type": "Set",
      "elements": [
        "AES-XTS Testing Revision 2.0A2914",
        "ECDSA SigVer (FIPS186-4)A2921",
        "KDF SP800-108A2921",
        "AES-ECBA3009",
        "AES-KWA2921",
        "SHA2-384A2921",
        "Hash DRBGA2921",
        "SHA2-256A2921",
        "HMAC-SHA2-384A2921"
      ]
    },
    "policy_algorithms": {
      "_type": "Set",
      "elements": [
        "#A3009",
        "#A2921",
        "#A2914"
      ]
    },
    "policy_metadata": {
      "/Author": "Hawes, David J. (Fed)",
      "/Comments": "",
      "/Company": "",
      "/CreationDate": "D:20241115113403-05\u002700\u0027",
      "/Creator": "Acrobat PDFMaker 24 for Word",
      "/Keywords": "",
      "/ModDate": "D:20241115113435-05\u002700\u0027",
      "/Producer": "Adobe PDF Library 24.3.144",
      "/SourceModified": "",
      "/Subject": "",
      "/Title": "",
      "pdf_file_size_bytes": 780080,
      "pdf_hyperlinks": {
        "_type": "Set",
        "elements": [
          "https://www.ampex.com/",
          "https://keypair.us/"
        ]
      },
      "pdf_is_encrypted": false,
      "pdf_number_of_pages": 24
    }
  },
  "state": {
    "_type": "sec_certs.sample.fips.InternalState",
    "module": {
      "_type": "sec_certs.sample.document_state.DocumentState",
      "convert_ok": true,
      "download_ok": true,
      "extract_ok": true,
      "json_hash": null,
      "source_hash": null,
      "txt_hash": null
    },
    "policy": {
      "_type": "sec_certs.sample.document_state.DocumentState",
      "convert_ok": true,
      "download_ok": true,
      "extract_ok": true,
      "json_hash": "4d7c071b9817925896551e92ab0a5680b51cb0700306a91e0491e66588cbef43",
      "source_hash": "e80dd2af5f14f6cc04d2c1250136647584418b97c5bf9066eea3921eacb02157",
      "txt_hash": "058e71b4fc78b9fbffbfdae729077170e47a757f9c58d81a3afe76042162b5b3"
    }
  },
  "web_data": {
    "_type": "sec_certs.sample.fips.FIPSCertificate.WebData",
    "caveat": "Interim validation. No assurance of minimum security of SSPs (e.g., keys, bit strings) that are externally loaded, or of SSPs established with externally loaded SSPs",
    "certificate_pdf_url": "https://csrc.nist.gov/CSRC/media/projects/cryptographic-module-validation-program/documents/certificates/January 2025-signed.pdf",
    "date_sunset": "2027-01-06",
    "description": "The Ampex TSEM hardware module provides two inline (\u201cbump in the wire\u201d) SATA encryptors running at 6Gbps. The paired encryptors support line rate performance with a very modest latency penalty. Using an intelligent secure microcontroller, the TSEM imposes few requirements or dependencies on the host platform, facilitating rolling software patches and without compromising the system design. The module is designed to operate over the industrial temperature range (components rated -40 to +85) and requires a dedicated carrier board to support cooling and physical security.",
    "embodiment": "Multi-Chip Embedded",
    "exceptions": [
      "Operational environment: N/A",
      "Non-invasive security: N/A",
      "Life-cycle assurance: Level 3",
      "Mitigation of other attacks: N/A"
    ],
    "fw_versions": null,
    "historical_reason": null,
    "hw_versions": null,
    "level": 2,
    "mentioned_certs": {},
    "module_name": "TuffServ\u00ae Encryption Module (TSEM)",
    "module_type": "Hardware",
    "revoked_link": null,
    "revoked_reason": null,
    "standard": "FIPS 140-3",
    "status": "active",
    "sw_versions": null,
    "tested_conf": null,
    "validation_history": [
      {
        "_type": "sec_certs.sample.fips.FIPSCertificate.ValidationHistoryEntry",
        "date": "2025-01-07",
        "lab": "Acumen Security",
        "validation_type": "Initial"
      }
    ],
    "vendor": "Ampex Data Systems Corporation",
    "vendor_url": "http://www.ampex.com"
  }
}