BSI-CC-PP-0125-2026
for
Security IC Platform Multi-assurance PP-
Configurations, Version 1.0
developed by
Infineon Technologies AG
NXP Semiconductors
STMicroelectronics
Thales
sponsored by
Eurosmart AISBL
Federal Office for Information Security (BSI), Postfach 20 03 63, 53133 Bonn, Germany
Phone +49 (0)228 99 9582-0, Fax +49 (0)228 9582-5477, Infoline +49 (0)228 99 9582-111
Certification Report V1.0 CC-PP-414 V3.8
BSI-CC-PP-0125-2026
Common Criteria Protection Profile Configuration
Security IC Platform Multi-assurance PP-Configurations, Version 1.0
developed by Infineon Technologies AG
NXP Semiconductors
STMicroelectronics
Thales
sponsored by Eurosmart AISBL
Assurance Package claimed in the Protection Profile Configuration:
Common Criteria Part 3 conformant
EAL 4 augmented by
ADV_SPM.1, ALC_DVS.2, ALC_FLR.2 and AVA_VAN.5
valid until 24 February 2036
The Protection Profile Configurations identified in this certificate have been evaluated at
an approved evaluation facility using the Common Methodology for IT Security Evaluation
(CEM), Version CC:2022 for conformance to the Common Criteria for IT Security
Evaluation (CC), Version CC:2022. CC and CEM are also published as ISO/IEC
15408:2022 and ISO/IEC 18045:2022.
This certificate applies only to the specific version and release of the PP-Configurations
and in conjunction with the complete Certification Report.
The evaluation has been conducted in accordance with the provisions of the certification
scheme of the German Federal Office for Information Security (BSI) and the conclusions
of the evaluation facility in the evaluation technical report are consistent with the evidence
adduced.
This certificate is not an endorsement of the Protection Profile Configurations by the
Federal Office for Information Security or any other organisation that recognises or gives
effect to this certificate, and no warranty of the Protection Profiles Configurations by the
Federal Office for Information Security or any other organisation that recognises or gives
effect to this certificate, is either expressed or implied.
Common Criteria
Recognition
Arrangement
Bonn, 25 February 2026
For the Federal Office for Information Security
Fabian Hodouschek L.S. Sandro Amendola
Head of Certification Director-General Directorate General S
Bundesamt für Sicherheit in der Informationstechnik
Godesberger Allee 87 - D-53175 Bonn - Postfach 20 03 63 - D-53133 Bonn
Phone +49 (0)228 99 9582-0 - Fax +49 (0)228 9582-5477 - Infoline +49 (0)228 99 9582-111
SOGIS Recognition
Agreement
Certification Report BSI-CC-PP-0125-2026
This page is intentionally left blank.
6 / 15
BSI-CC-PP-0125-2026 Certification Report
Contents
A Certification......................................................................................................................6
1 Preliminary Remarks.....................................................................................................6
2 Specifications of the Certification Procedure................................................................6
3 Recognition Agreements...............................................................................................7
3.1 European Recognition of CC – Certificates (SOGIS-MRA)....................................7
3.2 International Recognition of CC – Certificates (CCRA)..........................................7
4 Performance of Evaluation and Certification.................................................................8
5 Validity of the certification result....................................................................................8
6 Publication....................................................................................................................8
B Certification Results.......................................................................................................10
1 PP-Configuration overview..........................................................................................11
2 Security Functional Requirements..............................................................................11
3 Assurance Requirements............................................................................................12
4 Results of the PP-Configuration evaluation................................................................12
5 Obligations and notes for the usage...........................................................................12
6 PP-Configurations Document.....................................................................................12
7 Definitions...................................................................................................................13
7.1 Acronyms.............................................................................................................13
7.2 Glossary...............................................................................................................13
8 Bibliography................................................................................................................14
C Annexes......................................................................................................................... 16
5 / 15
Certification Report BSI-CC-PP-0125-2026
A Certification
1 Preliminary Remarks
Under the Act on the Federal Office for Information Security (BSIG), the Federal Office for
Information Security (BSI) has the task of issuing certificates for information technology
products as well as for Protection Profiles (PP) and accompanying PP-Configurations
(PPC).
A PP-Configuration (and its inherent PP Modules) defines an implementation-independent
set of IT security requirements in conjunction with and on top of existing PPs (so called
“base Protection Profiles”) for a category of products which are intended to meet common
consumer needs for IT security. A PP Configuration utilized by a user, consumer or
stakeholder for IT gives them the possibility to express their IT security needs without
referring to a specific product. Product certifications consequently can be based on the
combination of base Protection Profile plus Protection Profile Configuration (bPP + PPC).
For products which have been certified based on such a combination, an individual
certificate will be issued but the results from a bPP + PPC certification can be re-used for
the Security Target evaluation within a product evaluation when conformance to bPP +
PPC has been claimed.
Certification of the Protection Profile Configuration is carried out on the instigation of the
BSI or a sponsor. A part of the procedure is the technical examination (evaluation) of the
Protection Profile Configuration according to Common Criteria [1]. The evaluation is
usually carried out by an evaluation facility recognised by the BSI or by BSI itself. The
result of the certification procedure is the present Certification Report. This report contains
among others the certificate (summarised assessment) and the detailed Certification
Results.
2 Specifications of the Certification Procedure
The certification body conducts the procedure according to the criteria laid down in the
following:
● Act on the Federal Office for Information Security (BSIG)1
● BSI Certification and Approval Ordinance2
● BMI Regulations on Ex-parte Costs3
● Special decrees issued by the Bundesministerium des Innern (Federal Ministry of the
Interior)
● DIN EN ISO/IEC 17065 standard
1
Act on the Federal Office for Information Security (BSI-Gesetz - BSIG) of 2 December 2025, BGBI.
2025, no. 301, p. 2
Current version see website: http://www.gesetze-im-internet.de/bsig_2025/index.html
2
Ordinance on the Procedure for Issuance of Security Certificates and approval by the Federal Office for
Information Security (BSI-Zertifizierungs- und -Anerkennungsverordnung – BSIZertV) of 02 December
2025, Bundesgesetzblatt 2025, no. 301
Current version see website: http://www.gesetze-im-internet.de/bsizertv_2014/index.html
3
BMI Regulations on Ex-parte Costs - Besondere Gebührenverordnung des BMI für individuell
zurechenbare öffentliche Leistungen in dessen Zuständigkeitsbereich (BMIBGebV), Abschnitt 7 (BSI-
Gesetz) - dated 2 September 2019, Bundesgesetzblatt I p. 1365
Current version see website: https://www.bsi.bund.de/Gebuehrenverordnung
6 / 15
BSI-CC-PP-0125-2026 Certification Report
● BSI certification: Scheme documentation describing the certification process (CC-
Produkte) [3], including PP Certification
● BSI certification: Scheme documentation on requirements for the Evaluation Facility, its
approval and licencing process (CC-Stellen) [3]
● Common Criteria for IT Security Evaluation (CC)4
[1] also published as ISO/IEC 15408
● Common Methodology for IT Security Evaluation [2] also published as ISO/IEC 18045
● BSI certification: Application Notes and Interpretation of the Scheme (AIS) [4]
● Internal procedure for the issuance of a PP certificate (PP Configuration)
3 Recognition Agreements
In order to avoid multiple certification of the same PP or PP-Configuration in different
countries a mutual recognition of IT security certificates - as far as such certificates are
based on CC - under certain conditions was agreed. Therefore, the results of this
evaluation and certification procedure can be re-used by the product certificate issuing
scheme in the evaluation of a Security Target within a subsequent product evaluation and
certification procedure.
3.1 European Recognition of CC – Certificates (SOGIS-MRA)
The SOGIS-Mutual Recognition Agreement (SOGIS-MRA) Version 3 became effective in
April 2010. It defines the recognition of certificates for IT-Products at a basic recognition
level up to and including Common Criteria (CC) Evaluation Assurance Levels EAL 4, and
in addition at higher recognition levels for IT-Products related to certain technical domains
only. In addition, certificates issued for PP or PP-Configuration based on Common Criteria
are part of the recognition agreement.
The SOGIS-MRA logo printed on the certificate indicates that it is recognised under the
terms of this agreement by the related bodies of the signatory nations. A disclaimer
beneath the logo indicates the specific scope of recognition.
Details on recognition, the signatory nations, technical domains and the agreement itself
can be found at https://www.sogis.eu.
3.2 International Recognition of CC – Certificates (CCRA)
The international Common Criteria Recognition Arrangement (CCRA) became effective in
September 2014 in its current version. It defines the recognition of certificates for IT-
products based on collaborative Protection Profiles (cPP) (exact use), CC certificates
based on assurance components up to and including EAL 2 or the assurance family Flaw
Remediation (ALC_FLR) and CC certificates for Protection Profiles and for collaborative
Protection Profiles (cPP).
The Common Criteria Recognition Arrangement logo printed on the certificate indicates
that this certification is recognised under the terms of this agreement by the related bodies
of the signatory nations. A disclaimer beneath the logo indicates the specific scope of
recognition.
Details on recognition, the signatory nations and the agreement itself can be found at
https://www.commoncriteriaportal.org.
4
Proclamation of the Federal Office for Information Security of 14 April 2023 on https://www.bsi.bund.de
7 / 15
Certification Report BSI-CC-PP-0125-2026
4 Performance of Evaluation and Certification
The certification body monitors each individual evaluation to ensure a uniform procedure, a
uniform interpretation of the criteria and uniform ratings.
The Security IC Platform Multi-assurance PP-Configurations, Version 1.0 has undergone
the certification procedure at BSI.
The evaluation of the PP Security IC Platform Multi-assurance PP-Configurations, Version
1.0 was conducted by the ITSEF SGS Digital Trust Services GmbH. The evaluation was
completed on 23 February 2026. The ITSEF SGS Digital Trust Services GmbH is an
evaluation facility (ITSEF)5
recognised by the certification body of BSI.
For this certification procedure the sponsor and applicant is: Eurosmart AISBL.
The PP was developed by: Infineon Technologies AG, NXP Semiconductors,
STMicroelectronics and Thales.
The certification is concluded with the comparability check and the production of this
Certification Report. This work was completed by the BSI.
5 Validity of the certification result
This Certification Report only applies to the version of the PP-Configurations document as
indicated.
In case of changes to the certified version of the PP-Configurations, the validity can be
extended to new versions and releases, provided the sponsor applies for assurance
continuity (i.e. re-certification or maintenance) of the modified PP-Configurations, in
accordance with the procedural requirements, and the evaluation does not reveal any
security deficiencies.
For the meaning of the CC concepts and terms please refer to CC [1] Part 1 through 5.
The validity of this certificate ends as outlined on the certificate. The applicant and the
sponsor of this certificate are recommended to review the technical content of the certified
PP-Configurations according to the evolvement of the technology and of the intended
operational environment of the type of product concerned as well as according to the
evolvement of the evaluation criteria. Such review should result in an update and a re-
certification of the PP-Configurations accordingly. Typically, technical standards are
reviewed on a five years basis.
The limitation of validity of this PP certificate does not necessarily impact the validity
period of a product certificate referring to this Protection Profile, but the certification body
issuing a product certificate based on this Protection Profile should take it into its
consideration on validity.
6 Publication
The PP Security IC Platform Multi-assurance PP-Configurations, Version 1.0 has been
included in the BSI list of the certified Protection Profiles, which is published regularly (see
also Internet: https://www.bsi.bund.de). Further information can be obtained from BSI-
Infoline +49 228 9582-111. The Certification Report may be obtained in electronic form at
the internet address stated above.
5
Information Technology Security Evaluation Facility
8 / 15
BSI-CC-PP-0125-2026 Certification Report
B Certification Results
The following results represent a summary of
● the certified PP-Configurations,
● the relevant evaluation results from the evaluation facility, and
● complementary notes and stipulations of the certification body.
9 / 15
Certification Report BSI-CC-PP-0125-2026
1 PP-Configuration overview
The Security IC Platform Multi-assurance PP-Configurations, Version 1.0 [5] is established
by the Eurosmart AISBL as a basis for the development of Security Targets in order to
perform a certification of an IT-product, the Target of Evaluation (TOE).
The PP-Configurations defined in [5] are composed of the base PP-0084-V2 [7] and a
subset of functional packages and PP-Modules. All the PP-Modules have the PP-0084-V2
as base PP. The PP-Modules address functionality that is already in the scope of the base
PP, but at a strictly higher assurance level including ADV_SPM.1. The TOE type is the
same as in the base PP, a Security IC platform comprising hardware and IC Dedicated
Software.
The selectable PP-Modules are defined in chapters 3.1 to 3.5 of the PP-Configurations [5]:
● PP-Module ‘Authentication of the Security IC’
● PP-Module ‘Loader 1’ (for usage in secured environment only)
● PP-Module ‘Loader 2’ (for usage by authorised users only)
● PP-Module ‘Address-based Access Control’
● PP-Module ‘Limited Test Features’, does not claim any functional package conformance
Each PP-Module claims conformance to the assurance package EAL4 augmented with
ADV_SPM.1, ALC_DVS.2, ALC_FLR.2 and AVA_VAN.5, including the refinements defined
in the base PP [7].
The TOE implements physical protection of its assets and the assets of the Embedded
Software against probing, forced and inherent information leakage, manipulation, and
malfunctions induced by environmental stress as defined in the base PP [7]. Based on
these assets the security problem definition is defined in terms of assumptions, threats and
organisational security policies. This is outlined in the base PP [7], chapter 3. The PP-
Modules do not add assets, OSPs nor assumptions.
The PP-Configurations require strict conformance of a Security Target claiming
conformance to it.
2 Security Functional Requirements
Based on the security objectives to be fulfilled by a TOE claiming conformance to this PP-
Configuration the security policy is expressed by the set of security functional
requirements (SFR) to be implemented by a TOE.
Specific details concerning these security policies can be found in the base PP [7] chapter
6 and in chapters 3.x.5.1 of the PP-Configurations document [5] for each PP-Module.
The SFRs are selected from Common Criteria Part 2 and some of them are newly defined.
Thus the SFR claim is called:
Common Criteria Part 2 extended
10 / 15
BSI-CC-PP-0125-2026 Certification Report
3 Assurance Requirements
The TOE security assurance package claimed in the PP-Configurations is based entirely
on the assurance components defined in part 3 of the Common Criteria. Thus, this
assurance package is called:
● Assurance Common Criteria Part 3 conformant
Multi-Assurance
● Global Assurance EAL 4 augmented by
ALC_DVS.2, ALC_FLR.2 and AVA_VAN.5
● Assurance of the PP-Module-based sub-TSFs
EAL 4 augmented by
ADV_SPM.1, ALC_DVS.2, ALC_FLR.2 and AVA_VAN.5
(for the definition and scope of assurance packages according to CC see [1], part 3 for
details).
4 Results of the PP-Configuration evaluation
The Evaluation Technical Report (ETR) [6] was provided by the ITSEF according to the
Common Criteria [1], the Methodology [2], the requirements of the Scheme [3] and all
Application Notes and Interpretations of the Scheme (AIS) [4] as relevant for the TOE.
As a result of the evaluation the verdict PASS is confirmed for the assurance components
of the class ACE (PP-Configuration evaluation).
The following assurance components were used:
ACE_INT.1 PP-Module introduction
ACE_CCL.1 PP-Module conformance claims
ACE_SPD.1 PP-Module security problem definition
ACE_OBJ.2 PP-Module security objectives
ACE_ECD.1 PP-Module extended components definition
ACE_REQ.2 PP-Module derived security requirements
ACE_MCO.1 PP-Module consistency
ACE_CCO.1 PP-Configuration consistency
The results of the evaluation are only applicable to the PP-Configurations as defined in
chapter 1.
5 Obligations and notes for the usage
The following aspects need to be fulfilled when using the PP-Configurations:
none
6 PP-Configurations Document
The Security IC Platform Multi-assurance PP-Configurations, Version 1.0 [5] is being
provided within a separate document as Annex A of this report.
11 / 15
Certification Report BSI-CC-PP-0125-2026
7 Definitions
7.1 Acronyms
AIS Application Notes and Interpretations of the Scheme
bPP base Protection Profile
BSI Bundesamt für Sicherheit in der Informationstechnik / Federal Office for
Information Security, Bonn, Germany
BSIG BSI-Gesetz / Act on the Federal Office for Information Security
CCRA Common Criteria Recognition Arrangement
CC Common Criteria for IT Security Evaluation
CEM Common Methodology for Information Technology Security Evaluation
EAL Evaluation Assurance Level
ETR Evaluation Technical Report
IT Information Technology
ITSEF Information Technology Security Evaluation Facility
PP Protection Profile
PPC Protection Profile Configuration
SAR Security Assurance Requirement
SF Security Function
SFP Security Function Policy
SFR Security Functional Requirement
ST Security Target
TOE Target of Evaluation
TSF TOE Security Functionality
7.2 Glossary
Augmentation - The addition of one or more requirement(s) to a package.
Extension - The addition to an ST or PP of functional requirements not contained in part 2
and/or assurance requirements not contained in part 3 of the CC.
Object - A passive entity in the TOE, that contains or receives information, and upon which
subjects perform operations.
Protection Profile - An implementation-independent statement of security needs for a
TOE type.
Security Target - An implementation-dependent statement of security needs for a specific
identified TOE.
Target of Evaluation - A set of software, firmware and/or hardware possibly accompanied
by guidance.
TOE Security Functionality - Combined functionality of all hardware, software, and
firmware of a TOE that must be relied upon for the correct enforcement of the SFRs.
12 / 15
BSI-CC-PP-0125-2026 Certification Report
8 Bibliography
[1] ISO-Version:
ISO 15408:2022, Information security, cybersecurity and privacy protection —
Evaluation criteria for IT security
- Part 1: Introduction and general model
- Part 2: Security functional components
- Part 3: Security assurance components
- Part 4: Framework for the specification of evaluation methods and activities
- Part 5: Pre-defined packages of security requirements
https://www.iso.org/standard/72891.html
https://www.iso.org/standard/72892.html
https://www.iso.org/standard/72906.html
https://www.iso.org/standard/72913.html
https://www.iso.org/standard/72917.html
CCRA-Version:
CC:2022 R1, Common Criteria for Information Technology Security Evaluation
- Part 1: Introduction and general model
- Part 2: Security functional components
- Part 3: Security assurance components
- Part 4: Framework for the specification of evaluation methods and activities
- Part 5: Pre-defined packages of security requirements
https://www.commoncriteriaportal.org
[2] ISO-Version:
ISO 18045:2022: Information security, cybersecurity and privacy protection —
Evaluation criteria for IT security — Methodology for IT security evaluation
https://www.iso.org/standard/72889.html
CCRA-Version:
CEM:2022 R1, Common Methodology for Information Technology Security
Evaluation
https://www.commoncriteriaportal.org
[3] BSI certification: Scheme documentation describing the certification process (CC-
Produkte) and Scheme documentation on requirements for the Evaluation Facility,
approval and licencing (CC-Stellen), https://www.bsi.bund.de/zertifizierung
[4] Application Notes and Interpretations of the Scheme (AIS) as relevant for the TOE6
[5] PP-Configuration: Security IC Platform Multi-assurance PP-Configurations, Version
1.0, 16 December 2025, Eurosmart AISBL, SHA256:
6973adfb8dc9d9d4aff7796e2baf001ec3a12c506cb453482b22b3d7e6082607
[6] Evaluation Technical Report for BSI-CC-PP-0125 - Security IC Platform Multi-
assurance PP-Configurations, Version 2.0, 10 February 2026, SGS Digital Trust
Services GmbH (confidential document)
6
specially
• AIS 14, Version 7, Anforderungen an Aufbau und Inhalt der ETR-Teile
• AIS 19, Version 9, Anforderungen an Aufbau und Inhalt der Zusammenfassung des ETR
• AIS 32, Version 7, CC-Interpretationen im deutschen Zertifizierungsschema
• AIS 41, Version 2, Guidelines for PPs and STs
13 / 15
Certification Report BSI-CC-PP-0125-2026
[7] Base PP: Security IC Platform Protection Profile including optional Functional
Packages, BSI-CC-PP-0084-V2, Version 2.0, 16 December 2025, Eurosmart AISBL
14 / 15
BSI-CC-PP-0125-2026 Certification Report
C Annexes
List of annexes of this certification report
Annex A: Protection Profile Security IC Platform Multi-assurance PP-Configurations,
Version 1.0 [5] provided within a separate document.
Note: End of report
15 / 15