FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 1 of 120
HPE FlexNetwork 10500 and
HPE FlexFabric 12500 and
12900 Switch Series
FIPS 140-2 Non-Proprietary Security Policy
Security Level 2 Validation
Version 1.00
June 2017
Copyright Hewlett-Packard Development Company,L.P 2017, May be reproduced only in its
original entirety [without revision].
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 2 of 120
Revision Record
Date Revision Version Change Description Author
2017-02-01 1.00 Initial version HPE
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 3 of 120
Table of Contents
1 Introduction.................................................................................................................................... 9
2 Overview....................................................................................................................................... 10
2.1 Comware Switch Block Level Diagram............................................................................... 11
2.2 HPE FlexNetwork 10500 Chassis Switch Series................................................................ 14
2.2.1 Product overview...................................................................................................... 14
2.2.2 Test Modules............................................................................................................ 14
2.2.3 Opacity shield and tamper evidence label ............................................................... 16
2.3 HPE FlexFabric 12500 Chassis Switch Series ................................................................... 31
2.3.1 Product overview...................................................................................................... 31
2.3.2 Test Modules............................................................................................................ 31
2.3.3 Opacity shield and tamper evidence label ............................................................... 32
2.4 HPE FlexFabric 12900 Chassis Switch Series ................................................................... 53
2.4.1 Product overview...................................................................................................... 53
2.4.2 Test Modules............................................................................................................ 53
2.4.3 Opacity shield and tamper evidence label ............................................................... 54
3 Security Appliance Validation Level.......................................................................................... 65
4 Physical Characteristics and Security Appliance Interfaces.................................................. 66
4.1 Modular Chassis switches .................................................................................................. 66
4.2 HPE FlexNetwork 10500 Chassis Switch Series................................................................ 66
4.3 HPE FlexFabric 12500 Chassis Switch Series ................................................................... 67
4.4 HPE FlexFabric 12900 Chassis Switch Series ................................................................... 67
4.5 Physical Interfaces Mapping ............................................................................................... 68
5 Roles, Services, and Authentication ......................................................................................... 70
5.1 Roles ................................................................................................................................... 70
5.2 Authentication Mechanisms ................................................................................................ 71
6 Services, Key / CSP and Algorithm Tables............................................................................... 73
6.1 Services .............................................................................................................................. 74
6.1.1 Unauthenticated Services ........................................................................................ 87
6.1.2 Non-Approved Services ........................................................................................... 87
6.2 Critical Security Parameters ............................................................................................... 88
6.3 Approved Algorithms......................................................................................................... 101
6.4 Allowed Algorithms............................................................................................................ 110
6.5 Non-Approved Algorithms................................................................................................. 111
7 Self-Tests.................................................................................................................................... 113
7.1 Power-On Self-Tests......................................................................................................... 113
7.2 Conditional Self-Tests....................................................................................................... 114
8 Delivery and Operation ............................................................................................................. 115
8.1 Secure Delivery................................................................................................................. 115
8.2 Secure Operation.............................................................................................................. 116
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 4 of 120
9 Physical Security Mechanism .................................................................................................. 117
10 Mitigation of Other Attacks..................................................................................................... 119
11 Documentation References .................................................................................................... 120
11.1 Obtaining documentation ................................................................................................ 120
11.2 Technical support............................................................................................................ 120
TABLE OF TABLES
Table 1 HPE FlexNetwork 10500 Switch Series Test configuration 1..................................................... 15
Table 2 HPE FlexNetwork 10500 Switch Series Test configuration 2..................................................... 15
Table 3 HPE FlexNetwork 10500 Switch Series Test configuration 3..................................................... 15
Table 4 HPE FlexNetwork 10500 Switch Series Test configuration 4..................................................... 15
Table 5 HPE FlexNetwork 10500 Switch Series Test configuration 5..................................................... 15
Table 6 HPE FlexNetwork 10500 Switch Series Test configuration 6..................................................... 15
Table 7 HPE FlexNetwork 10500 Switch Series Test configuration 7..................................................... 16
Table 8 HPE FlexNetwork 10500 Switch Series Test configuration 8..................................................... 16
Table 9 HPE FlexFabric 12518E Switch Series Test configuration 1...................................................... 32
Table 10 HPE FlexFabric 12508E Switch Series Test configuration 2.................................................... 32
Table 11 HPE FlexFabric 12504 Switch Series Test configuration 3 ...................................................... 32
Table 12 HPE FlexFabric 12504 Switch Series Test configuration 4 ...................................................... 32
Table 13 HPE FlexFabric 12508E Switch Series Test configuration 1.................................................... 53
Table 14 HPE FlexFabric 12510E Switch Series Test configuration 2.................................................... 54
Table 15 HPE FlexFabric 12516E Switch Series Test configuration 3.................................................... 54
Table 16 Validation Level by Section....................................................................................................... 65
Table 17 Correspondence between Physical and Logical Interfaces...................................................... 68
Table 18 Roles and Role description....................................................................................................... 70
Table 19 Crypto Officer Services ............................................................................................................. 75
Table 20 User Services............................................................................................................................ 83
Table 21 Critical Security Parameters ..................................................................................................... 90
Table 22 Comware V7 Kernel – Approved Algorithms ......................................................................... 103
Table 23 Comware V7 Firmware – Approved Algorithms..................................................................... 105
Table 24 Comware V7 Firmware - Allowed Algorithms ........................................................................ 110
Table 25 Non-Approved Algorithms...................................................................................................... 111
Table 26 Power-On Self-Tests............................................................................................................... 113
Table 27 Conditional Self-Tests............................................................................................................. 114
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 5 of 120
TABLE OF FIGURES
Figure 1 Security Architecture Block Diagram ......................................................................................... 11
Figure 2 HPE FlexNetwork 10504 Switch Chassis (JC613A) / HPE FlexNetwork 10504 Switch TAA-
Compliant Chassis (JG820A) ........................................................................................................... 16
Figure 3 HPE FlexNetwork 10508 Switch Chassis (JC612A) / HPE FlexNetwork 10508 Switch TAA-
Compliant Chassis (JG821A) ........................................................................................................... 16
Figure 4 HPE FlexNetwork 10508-V Switch Chassis (JC611A) / HPE FlexNetwork 10508-V Switch TAA-
Compliant Chassis (JG822A) ........................................................................................................... 17
Figure 5 HPE FlexNetwork 10512 Switch Chassis (JC748A) / HPE FlexNetwork 10512 Switch TAA-
Compliant Chassis (JG823A) ........................................................................................................... 17
Figure 6 HPE FlexNetwork 10504 Switch Chassis (JC613A) / HPE FlexNetwork 10504 Switch TAA-
Compliant Chassis (JG820A) Tamper Evidence Labels and Opacity Shields................................. 19
Figure 7 HPE FlexNetwork 10508 Switch Chassis (JC612A) / HPE FlexNetwork 10508 Switch TAA-
Compliant Chassis (JG821A) Tamper Evidence Labels and Opacity Shields................................. 23
Figure 8 HPE FlexNetwork 10508-V Switch Chassis (JC611A) / HPE FlexNetwork 10508-V Switch TAA-
Compliant Chassis (JG822A) Tamper Evidence Labels and Opacity Shields................................. 26
Figure 9 HPE FlexNetwork 10512 Switch Chassis (JC748A) / HPE FlexNetwork 10512 Switch TAA-
Compliant Chassis (JG823A) Tamper Evidence Labels and Opacity Shields................................. 30
Figure 10 HPE FlexFabric 12504 AC Switch Chassis (JC654A)............................................................. 33
Figure 11 HPE FlexFabric 12508E AC Switch Chassis (JG782A) .......................................................... 33
Figure 12 HPE FlexFabric 12518E AC Switch Chassis (JG784A) .......................................................... 34
Figure 13 HPE FlexFabric 12504 AC Switch Chassis (JC654A) Tamper Evidence Labels and Opacity
Shields.............................................................................................................................................. 40
Figure 14 HPE FlexFabric 12508E AC Switch Chassis (JG782A) Tamper Evidence Labels and Opacity
Shields.............................................................................................................................................. 46
Figure 15 HPE FlexFabric 12518E AC Switch Chassis (JG784A) Tamper Evidence Labels and Opacity
Shields.............................................................................................................................................. 52
Figure 16 HPE FlexFabric 12908E Switch Chassis (JH255A) ................................................................ 54
Figure 17 HPE FlexFabric 12910 Switch AC Chassis (JG619A) / HPE FlexFabric 12910 TAA Compliant
Switch AC Chassis (JH113A)........................................................................................................... 55
Figure 18 HPE FlexFabric 12916E Switch Chassis (JH103A) ................................................................ 55
Figure 19 HPE FlexFabric 12908E Switch Chassis (JH255A) Tamper Evidence Labels and Opacity
Shields.............................................................................................................................................. 57
Figure 20 HPE FlexFabric 12910 Switch AC Chassis (JG619A) / HPE FlexFabric 12910 TAA Compliant
Switch AC Chassis (JH113A) Tamper Evidence Labels and Opacity Shields................................. 60
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 6 of 120
Figure 21 HPE FlexFabric 12916E Switch Chassis (JH103A) Tamper Evidence Labels and Opacity
Shields.............................................................................................................................................. 64
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 7 of 120
FIPS 140-2 Non-Proprietary Security Policy for the HPE
Networking Switches
Keywords: Security Policy, CSP, Roles, Service, Cryptographic Module
List of abbreviations:
Abbreviation Full spelling
AAA Authentication, Authorization, and Accounting
AES Advanced Encryption Standard
CF Compact Flash
CLI Command Line Interface
CMVP Cryptographic Module Validation Program
CSP Critical Security Parameter
DES Data Encryption Standard
DOA Dead on arrival
FCoE Fibre Channel over Ethernet
FIPS Federal Information Processing Standard
HMAC Hash-based Message Authentication Code
HTTP Hyper Text Transfer Protocol
IRF Intelligent Resilient Framework
KAT Known Answer Test
LED Light Emitting Diode
LPU Line Processing Unit
MAC Message Authentication Code
MAN Metropolitan Area Network
MPU Main Processing Unit
NIST National Institute of Standards and Technology
OAA Open Application Architecture
OAP Open Application Platform
PSU Power Supply Unit
RADIUS Remote Authentication Dial In User Service
RAM Random Access Memory
RSA Rivest Shamir and Adleman method for asymmetric encryption
SFP Small Form-Factor Plugable
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 8 of 120
Abbreviation Full spelling
SFP+ Enhanced Small Form-Factor Pluggable
SHA Secure Hash Algorithm
SRPU Switching and routing processor unit
SSL Secure Sockets Layer
XFP 10 Gigabit Small Form-Factor Pluggable
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 9 of 120
1 Introduction
This document is a non-proprietary Cryptographic Module Security Policy for HPE FlexNetwork
10500 and HPE FlexFabric 12500 and 12900 Switch Series. The policy describes how the HPE
FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series meet the
requirements of FIPS 140-2. This document also describes how to configure the HPE
FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series in FIPS 140-2 mode.
This document was prepared as part of the FIPS 140-2 Security Level 2 validation.
FIPS 140-2 standard details the U.S. Government requirements for cryptographic security
appliances. More information about the standard and validation program is available on the
NIST website at csrc.nist.gov/groups/STM/cmvp/.
This document includes the following sections:
 Overview
 Security Appliance Validation Level
 Physical Characteristics and Security Appliance Interfaces
 Roles, Services and Authentication
 Services, Key / CSP and Algorithm Tables
 Self-Tests
 Delivery and Operation
 Physical Security Mechanism
 Mitigation of Other Attacks
 Obtaining Documentation and Technical Assistance
NOTE: The following names are referencing the same thing: HPE FlexFabric, HPE Networking
devices and HPE Networking Switches.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 10 of 120
2 Overview
The HPE Networking devices are suitable for a range of uses: at the edge of a network,
connecting server clusters in a data center, in an enterprise LAN core, and in large-scale
industrial networks and campus networks. Each device is based on the HPE Comware Software,
Version 7.1.045 platform.
The HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series modules are
being validated as a multi-chip standalone module at FIPS 140-2 Security Level 2.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 11 of 120
2.1 Comware Switch Block Level Diagram
Figure 1 Security Architecture Block Diagram
The cryptographic module provides the following services externally:
1. Management: supports various login methods and configuration interfaces for managing the
system.
Cryptographic Module
Hardware
Firmware
Management Service Communication Service
Security Function
Administrator
Network user/IT
entity
Forwarding Function
I1
I2
A2 A3
D2
C2
D1
M1
M2
C1
A1
Authorize
Authorize
Authorize
C3
C4
ACL
Authorize
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 12 of 120
2. Communication: supports interoperation between the communication protocols at different
layers in the protocol stack, such as 802.3, PPP, and IP, and uses the forwarding function to
receive/send packets for the local device and forward packets for other devices.
To ensure security, the security function provides appropriate access control for the cryptographic
module to identify and authenticate the external entities attempting to access them, and authorize
the external entities that pass the identification and authentication. The access control function
also records the external entities’ accesses to the services, such as the beginning time and end
time of a visit. The figure above shows how administrators (crypto officer, user role) and network
users access to a cryptographic module service.
M2: The administrator accesses the management service to configure the security function.
M1: The administrator accesses the management service to configure the communication service.
C1: The security function issues the forwarding control ACL or other control measures to the
forwarding function for security processing like packet filtering.
D2: The communication service uses the forwarding function to receive and send packets for the
local device.
C2: The communication service issues routing entries or MAC address entries to the forwarding
function for forwarding packets for other devices.
A1: The administrator connects to a physical management interface (the console for example) of
the cryptographic module to access the system management access control service of the
security function. If the access succeeds, the l1 access to the management service is authorized.
The security function uses the C3 authorization action to authorize the administrator
administrative roles.
I1: The administrator accesses the management service through the physical management
interface.
A2: The administrator connects to a network interface (such as an Ethernet interface) of the
cryptographic module to access the system management access control service of the security
function. If the access succeeds, the I2 access to the management service is authorized.
I2: The administrator accesses the management service through the network interface.
A3: A network user connects to a network interface of the cryptographic module to access the
communication access control service of the security function. If the access succeeds, D1/D2 are
authorized. The security function uses the C4 authorization action to authorize the network user
the communication service access privilege, namely, the network access privilege.
D1: Forwarding packets for the network user.
To facilitate cryptographic module management, the administrator is allowed to access the
system management service by remote login through a network interface. To prevent the
authentication data of the administrator (such as the username and password) from being
intercepted and prevent the operation commands from being tampered, the cryptographic module
provides the SSH2/HTTPS for secure remote management.
For the management service, the cryptographic module defines predefined roles and custom user
roles, which service differs as result of different access permissions.
Each user can switch to a different user role without reconnecting to the device. To switch to a
different user role, a user must provide the role switching authentication information. The
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 13 of 120
authentication is identity-based. All users can be authenticated locally, and optionally supports
authentication via a RADIUS and TACACS+ server.
If needed, IPSec can be configured to protect the network data.
No external programs can take control of the cryptographic module, because the cryptographic
module does not provide the general-purpose computing service. This ensures the absolute
control of the cryptographic module.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 14 of 120
2.2 HPE FlexNetwork 10500 Chassis Switch Series
2.2.1 Product overview
The HPE FlexNetwork 10500 Switch Series sets a new benchmark for performance, reliability,
and scalability with next-generation CLOS architecture. Designed for enterprise campus core
networks, the HPE FlexNetwork 10500 switch series enables a cloud-connected and media-rich
capable infrastructure. The HPE FlexNetwork 10500 series provides industry-leading 10GbE/40
GbE port density, 3 microsecond latency, and very low energy consumption. With HPE
Intelligent Resilient Framework (IRF) technology, the scalability and resiliency of the HPE
FlexNetwork 10500 switch series can be extended and virtualized across up to four chassis with
a single management interface, enabling flatter, more agile networks. The HPE FlexNetwork
10500 Switch Series, along with the entire HPE FlexNetwork architecture, can be seamlessly
managed through single-pane-of-glass management with HPE Intelligent Management Center
(IMC).
 Advanced next-generation CLOS architecture
 More than 11 terabit-per-second switching capacity
 Feature-rich, including IPv6 and MPLS functionality
 HPE IRF technology virtualizes up to four chassis
 Ultra-high 1/10/40-GbE density; 100-GbE ready
2.2.2 Test Modules
Testing included eight models in the HPE FlexNetwork 10500 switch series
 HPE FlexNetwork 10504 Switch Chassis (JC613A)
 HPE FlexNetwork 10504 Switch TAA
1
-Compliant Chassis (JG820A)
 HPE FlexNetwork 10508 Switch Chassis (JC612A)
 HPE FlexNetwork 10508 Switch TAA
1
-Compliant Chassis (JG821A)
 HPE FlexNetwork 10508-V Switch Chassis (JC611A)
 HPE FlexNetwork 10508-V Switch TAA
1
-Compliant Chassis (JG822A)
 HPE FlexNetwork 10512 Switch Chassis (JC748A)
 HPE FlexNetwork 10512 Switch TAA
1
-Compliant Chassis (JG823A)
The Table 1 through Table 8 lists the test configurations for the HPE FlexNetwork 10500 Switch
Series switch series.
Chassis Modules
1
Trade Agreements Act (TAA) products are identical in hardware and software. The TAA designation indicates the
location of manufacturing.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 15 of 120
HPE FlexNetwork 10504
Switch Chassis
HPE 10500 Type A Main Processing Unit (JG496A)
Table 1 HPE FlexNetwork 10500 Switch Series Test configuration 1
Chassis Modules
HPE FlexNetwork 10504
Switch Chassis
HPE 10500 Type D Main Processing Unit (JH198A)
Table 2 HPE FlexNetwork 10500 Switch Series Test configuration 2
Chassis Modules
HPE FlexNetwork 10508
Switch Chassis
HPE 10500 Type A Main Processing Unit (JG496A)
Table 3 HPE FlexNetwork 10500 Switch Series Test configuration 3
Chassis Modules
HPE FlexNetwork 10508
Switch Chassis
HPE 10500 Type D Main Processing Unit (JH198A)
Table 4 HPE FlexNetwork 10500 Switch Series Test configuration 4
Chassis Modules
HPE FlexNetwork 10508-V
Switch Chassis
HPE 10500 Type A Main Processing Unit (JG496A)
Table 5 HPE FlexNetwork 10500 Switch Series Test configuration 5
Chassis Modules
HPE FlexNetwork 10508-V
Switch Chassis
HPE 10500 Type D Main Processing Unit (JH198A)
Table 6 HPE FlexNetwork 10500 Switch Series Test configuration 6
Chassis Modules
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 16 of 120
HPE FlexNetwork 10512
Switch Chassis
HPE 10500 Type A Main Processing Unit (JG496A)
Table 7 HPE FlexNetwork 10500 Switch Series Test configuration 7
Chassis Modules
HPE FlexNetwork 10512
Switch Chassis
HPE 10500 Type D Main Processing Unit (JH198A)
Table 8 HPE FlexNetwork 10500 Switch Series Test configuration 8
2.2.3 Opacity shield and tamper evidence label
The following figures show representatives of the series, with and without opacity shield and
tamper evidence label.
Figure 2 HPE FlexNetwork 10504 Switch Chassis (JC613A) / HPE FlexNetwork 10504 Switch TAA-Compliant
Chassis (JG820A)
Figure 3 HPE FlexNetwork 10508 Switch Chassis (JC612A) / HPE FlexNetwork 10508 Switch TAA-Compliant
Chassis (JG821A)
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 17 of 120
Figure 4 HPE FlexNetwork 10508-V Switch Chassis (JC611A) / HPE FlexNetwork 10508-V Switch TAA-Compliant
Chassis (JG822A)
Figure 5 HPE FlexNetwork 10512 Switch Chassis (JC748A) / HPE FlexNetwork 10512 Switch TAA-Compliant
Chassis (JG823A)
The following figures show representatives of the series, with tamper evidence label and opacity
shields.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 18 of 120
Top: Front:
Bottom: Rear:
Right:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 19 of 120
Left:
Figure 6 HPE FlexNetwork 10504 Switch Chassis (JC613A) / HPE FlexNetwork 10504 Switch TAA-Compliant
Chassis (JG820A) Tamper Evidence Labels and Opacity Shields
Front:
Rear:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 20 of 120
Right:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 21 of 120
Left:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 22 of 120
Top:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 23 of 120
Bottom:
Figure 7 HPE FlexNetwork 10508 Switch Chassis (JC612A) / HPE FlexNetwork 10508 Switch TAA-Compliant
Chassis (JG821A) Tamper Evidence Labels and Opacity Shields
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 24 of 120
Front:
Rear:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 25 of 120
Right:
Left:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 26 of 120
Top:
Bottom:
Figure 8 HPE FlexNetwork 10508-V Switch Chassis (JC611A) / HPE FlexNetwork 10508-V Switch TAA-Compliant
Chassis (JG822A) Tamper Evidence Labels and Opacity Shields
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 27 of 120
Top:
Front:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 28 of 120
Bottom:
Rear:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 29 of 120
Right:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 30 of 120
Left:
Figure 9 HPE FlexNetwork 10512 Switch Chassis (JC748A) / HPE FlexNetwork 10512 Switch TAA-Compliant
Chassis (JG823A) Tamper Evidence Labels and Opacity Shields
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 31 of 120
2.3 HPE FlexFabric 12500 Chassis Switch Series
2.3.1 Product overview
The HPE FlexFabric 12500 Switch series comprises a pair of powerful, next-generation routing
switches with outstanding capacity for the network core or the data center. Besides innovative
IRF technology that provides unprecedented levels of performance and high availability, HPE
FlexFabric 12500 series switches incorporate the OAA, which enables flexible deployment
options for new services. These switches also have energy-efficiency features that drive down
operational expenses. The HPE FlexFabric 12500 series is ideal for organizations
contemplating large-scale data center or campus consolidations, business continuity and
disaster recovery sites, metropolitan area network deployments, and other applications
requiring a robust, high-performance switching platform.
 Advanced multi-level, multi-plane non-blocking switching architecture.
 Ultra-high port density and support for multiple interface types including the XFP 10-Gigabit
Ethernet optical interface, SFP Gigabit Ethernet optical interface, and 10/100/1000 Mbps
electrical interface.
 Future-proof design, allowing the series to provide in the future value-added security
services like firewall, IPsec, and LB to meet the requirements of intelligent IP networks.
The HPE FlexFabric 12500 switch series are mainly deployed at:
 Core layer and distribution layer of large-scale data centers (DCs)
 Core layer of large-scale industry networks and campus networks
 Large clusters and grid computing
2.3.2 Test Modules
Testing included three models in the HPE FlexFabric 12500 switch series
 HPE FlexFabric 12504 AC Switch Chassis (JC654A)
 HPE FlexFabric 12508E AC Switch Chassis (JG782A)
 HPE FlexFabric 12518E AC Switch Chassis (JG784A)
The following four (4) test configurations are for the HPE 12500 series switches. Each
configuration has a main MPU and a redundant MPU.
The Table 9 through Table 12 lists the test configurations for the HPE 12500 Ethernet switch
series.
Chassis Modules
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 32 of 120
HPE FlexFabric 12518E AC
Switch Chassis
HPE FlexFabric 12500 Main Processing Unit (JG802A)
HPE FlexFabric 12500 Main Processing Unit (redundant)
(JG802A)
HPE FlexFabric 48 Port Module 12500 (JG794A)
Table 9 HPE FlexFabric 12518E Switch Series Test configuration 1
Chassis Modules
HPE FlexFabric 12508E AC
Switch Chassis
HPE FlexFabric 12500 Main Processing Unit (JG802A)
HPE FlexFabric 12500 Main Processing Unit
(redundant) (JG802A)
HPE FlexFabric 48 Port Module 12500 (JG794A)
Table 10 HPE FlexFabric 12508E Switch Series Test configuration 2
Chassis Modules
HPE FlexFabric 12504 AC
Switch Chassis
HPE FlexFabric 12500 Main Processing Unit (JC072B)
HPE FlexFabric 12500 Main Processing Unit
(redundant) (JC072B)
HPE FlexFabric 48 Port Module 12500 (JG794A)
Table 11 HPE FlexFabric 12504 Switch Series Test configuration 3
Chassis Modules
HPE FlexFabric 12504 AC
Switch Chassis
HPE FlexFabric 12500 Main Processing Unit (JG497A)
HPE FlexFabric 12500 Main Processing Unit
(redundant) (JG497A)
HPE FlexFabric 48 Port Module 12500 (JG794A)
Table 12 HPE FlexFabric 12504 Switch Series Test configuration 4
2.3.3 Opacity shield and tamper evidence label
The following figures show representatives of the series, with and without opacity shield and
tamper evidence label.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 33 of 120
Figure 10 HPE FlexFabric 12504 AC Switch Chassis (JC654A)
Figure 11 HPE FlexFabric 12508E AC Switch Chassis (JG782A)
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 34 of 120
Figure 12 HPE FlexFabric 12518E AC Switch Chassis (JG784A)
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 35 of 120
The following figures show representatives of the series, with tamper evidence label.
Top:
Front:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 36 of 120
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 37 of 120
Bottom:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 38 of 120
Rear:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 39 of 120
Right:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 40 of 120
Left:
Figure 13 HPE FlexFabric 12504 AC Switch Chassis (JC654A) Tamper Evidence Labels and Opacity Shields
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 41 of 120
Top:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 42 of 120
Front:
Bottom:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 43 of 120
Rear:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 44 of 120
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 45 of 120
Right:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 46 of 120
Left:
Figure 14 HPE FlexFabric 12508E AC Switch Chassis (JG782A) Tamper Evidence Labels and Opacity Shields
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 47 of 120
Top:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 48 of 120
Front:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 49 of 120
Bottom:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 50 of 120
Rear:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 51 of 120
Right:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 52 of 120
Left:
Figure 15 HPE FlexFabric 12518E AC Switch Chassis (JG784A) Tamper Evidence Labels and Opacity Shields
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 53 of 120
2.4 HPE FlexFabric 12900 Chassis Switch Series
2.4.1 Product overview
The HP FlexFabric 12900 Switch Series is a multi-chip standalone security appliances, and the
cryptographic boundary is defined as encompassing the “top,” “front,” “left,” “right,” and “bottom”
surfaces of the case.
The HPE FlexFabric 12900 Switch Series is a next-generation modular data center core switch
designed to support virtualized data centers and the evolving needs of private and public cloud
deployments. It delivers unprecedented levels of performance, buffering, scale, and availability
with high-density GbE, 10GbE, 40GbE and 100GbE connectivity.
The Switch Series includes 4-, 8-, 10- and 16-slot chassis. Ready for software-defined
networking (SDN), the 12900 Switch supports full Layer 2 and 3 features and advanced data
center features to build resilient scalable fabrics and achieve convergence.
2.4.2 Test Modules
Testing included four (4) models in the HPE FlexFabric 12900 switch series:
 HPE FlexFabric 12908E Switch Chassis (JH255A)
 HPE FlexFabric 12910 Switch AC Chassis (JG619A)
 HPE FlexFabric 12910 TAA
2
Compliant Switch AC Chassis (JH113A)
 HPE FlexFabric 12916E Switch Chassis (JH103A)
The following four (4) test configurations are for the HP FlexFabric 12900 Switch Series. Each
configuration has a main MPU and a redundant MPU.
The Table 13 through Table 15 lists the test configurations for the HP FlexFabric 12900 Switch
Series.
Chassis Modules
HPE FlexFabric 12908E Switch
Chassis (JH255A)
HPE FlexFabric 12900E Main Processing Unit
(JH104A)
HPE FlexFabric 12900E Main Processing Unit
(JH104A) (redundant)
Table 13 HPE FlexFabric 12508E Switch Series Test configuration 1
2
Trade Agreements Act (TAA) products are identical in hardware and software. The TAA designation indicates the
location of manufacturing.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 54 of 120
Chassis Modules
HPE FlexFabric 12910 Switch
AC Chassis (JG619A)
HPE FlexFabric 12910 Main Processing Unit (JG621A)
HPE FlexFabric 12910 Main Processing Unit (JG621A)
(redundant)
Table 14 HPE FlexFabric 12510E Switch Series Test configuration 2
Chassis Modules
HPE FlexFabric 12916E Switch
Chassis (JH103A)
HPE FlexFabric 12900E Main Processing Unit
(JH104A)
HPE FlexFabric 12900E Main Processing Unit
(JH104A) (redundant)
Table 15 HPE FlexFabric 12516E Switch Series Test configuration 3
2.4.3 Opacity shield and tamper evidence label
The following figures show representatives of the series, with and without opacity shield and
tamper evidence label.
Figure 16 HPE FlexFabric 12908E Switch Chassis (JH255A)
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 55 of 120
Figure 17 HPE FlexFabric 12910 Switch AC Chassis (JG619A) / HPE FlexFabric 12910 TAA Compliant Switch AC
Chassis (JH113A)
Figure 18 HPE FlexFabric 12916E Switch Chassis (JH103A)
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 56 of 120
Front: Rear:
Top: Bottom:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 57 of 120
Right:
Left:
Figure 19 HPE FlexFabric 12908E Switch Chassis (JH255A) Tamper Evidence Labels and Opacity Shields
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 58 of 120
Top: Front:
Bottom: Rear:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 59 of 120
Right:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 60 of 120
Left:
Figure 20 HPE FlexFabric 12910 Switch AC Chassis (JG619A) / HPE FlexFabric 12910 TAA Compliant Switch AC
Chassis (JH113A) Tamper Evidence Labels and Opacity Shields
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 61 of 120
Front: Rear:
Top: Bottom:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 62 of 120
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 63 of 120
Right:
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 64 of 120
Left:
Figure 21 HPE FlexFabric 12916E Switch Chassis (JH103A) Tamper Evidence Labels and Opacity Shields
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 65 of 120
3 Security Appliance Validation Level
The following table lists the level of validation for each area in the FIPS PUB 140-2.
Table 16 Validation Level by Section
No. Area Level
1 Cryptographic Module Specification 2
2 Cryptographic Module Ports and Interfaces 2
3 Roles, Services, and Authentication 3
4 Finite State Model 2
5 Physical Security 2
6 Operational Environment N/A
7 Cryptographic Key management 2
8 Electromagnetic Interface/Electromagnetic Compatibility 2
9 Self-Tests 2
10 Design Assurance 2
11 Mitigation of Other Attacks N/A
12 Overall Level 2
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 66 of 120
4 Physical Characteristics and Security Appliance
Interfaces
4.1 Modular Chassis switches
Each modular Ethernet switch is a multi-chip standalone security appliance. The cryptographic
boundary is defined as encompassing the “top,” “front,” “left,” “right,” and “bottom” surfaces of
the integrated chassis. The general components of each modular Ethernet switch include
firmware and hardware which are placed in the three-dimensional space within the chassis.
The modular Ethernet switches use a distributed architecture, which comprises the chassis,
power module, fan, backplane, main processing units (MPUs), and line processing units (LPUs).
A MPU is the core of a switch. It implements the following features:
 Provide system configuration and functions to monitor other boards as well as upgrade
and reset board software,
 Support active/standby switchover.
4.2 HPE FlexNetwork 10500 Chassis Switch Series
HPE 10500 chassis accommodate 4, 8 or 12 LPUs. LPUs provide Gigabit Ethernet, SFP
Gigabit, SFP+ 10-Gigabit, XFP 10-Gigabit ports, QSFP+ 40-Gigabit and CFP SF 40-Gigabit, in
a range of numbers and combinations. The series supports a maximum of 96 40-Gigabit, or 576
10-Gigabit, or 576 Gigabit ports. Each LPU has LEDs to indicate port status.
In addition, each 10500 switch requires a MPU. The chassis have two MPU slots. Each MPU
provides a Gigabit Ethernet management port, a serial management port, an auxiliary serial port
The MPUs have status LEDs for switching fabric modules, LPU, fan, power, and MPU status
reporting.
Ethernet ports Serial Ports USB ports Other Ports
HPE 10500 Type A
Main Processing Unit
(JG496A)
1 10/100/1000M 1 RJ45
RS232
NA NA
HPE 10500 Type D
Main Processing Unit
(JH198A) / HPE
10500 Type D Main
Processing Unit –
TAA Module
(JH206A)
1 10/100/1000M 1 RJ45
RS232
1 HOST
1 Console
1 CF card slot
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 67 of 120
Chassis power is provided through AC power frames. The frame has status LED and a power
frame switch.
https://www.hpe.com/us/en/product-catalog/networking/networking-switches/pip.networking-
switches.5117468.html describes MPU options, LPU options, and ports in detail along with the
interpretation of the LEDs.
4.3 HPE FlexFabric 12500 Chassis Switch Series
HPE 12500 chassis accommodate eight or eighteen LPUs. LPUs provide Gigabit Ethernet, SFP
Gigabit, SFP+ 10-Gigabit, and XFP 10-Gigabit ports in a range of numbers and combinations.
The series supports a maximum of 864 Gigabit Ethernet ports or 864 SFP Gigabit ports, and
512 SFP+ 10-Gigabit ports. Each LPU has LEDs to indicate port status.
In addition, each 12500 switch requires a MPU. The chassis have two MPU slots. Each MPU
provides a 100-Mbps Ethernet management port, a serial management port, an auxiliary serial
port, two USB ports (host and device), and a CF card slot. (The MPUs have reserved ports,
which are not supported at present (a RS-232/485 port, standby main board coaxial clock
interfaces, and MCC Gigabit Ethernet interfaces). The MPUs have status LEDs for switching
fabric modules, LPU, fan, power, MPU, and CF status reporting. Each MPU has a reset button.
Ethernet ports Serial Ports USB ports Other Port
HPE FlexFabric 12500
Main Processing Unit
(JG802A)
1 10/100/1000M,
2 MCC GE
1 Console 1 USB interface,
1 Console
1 ECP interface
(reserved)
1 CF card slot
HPE FlexFabric 12500
Main Processing Unit
(JC072B)
1 10/100/1000M 1 Console
1 Aux
1 primary USB 1 CF card slot
HPE FlexFabric 12500
Main Processing Unit
(JG497A)
1 10/100/1000M 1 Console
1 Aux
1 primary USB 1 CF card slot
Chassis power is provided through AC power. Each AC power frame accommodates up to six
hot-swappable 1U AC PSU. The frame has status LED and a power frame switch. A power
entry module supplies power input to each PSU.
https://www.hpe.com/us/en/product-catalog/networking/networking-switches/pip.networking-
switches.4177453.html describes MPU options, LPU options, and ports in detail along with the
interpretation of the LEDs.
4.4 HPE FlexFabric 12900 Chassis Switch Series
The HPE FlexFabric 12900 Switch Series is a next-generation modular data center core switch
designed to support virtualized data centers and the evolving needs of private and public cloud
deployments. It delivers unprecedented levels of performance, buffering, scale, and availability
with high-density GbE, 10GbE, 40GbE and 100GbE connectivity.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 68 of 120
The Switch Series includes 4-, 8-, 10- and 16-slot chassis. Ready for software-defined
networking (SDN), the 12900 Switch supports full Layer 2 and 3 features and advanced data
center features to build resilient scalable fabrics and achieve convergence.
Gigabit
Ethernet ports
Serial Ports USB ports Other Port
HPE FlexFabric 12900E Main
Processing Unit (JH104A)
4 1 1 NA
HPE FlexFabric 12900 Main
Processing Unit (JG621A) /
HPE FlexFabric 12910 TAA
Main Processing Unit
(JH114A)
1 1 1 NA
In addition, each HPE FlexFabric 12900 Switch requires a MPU. The chassis have two MPU
slots. Each MPU provides a Gigabit Ethernet management port, a serial management port, an
auxiliary serial port The MPUs have status LEDs for switching fabric modules, LPU, fan, power,
and MPU status reporting.
Chassis power is provided through AC power frames. The frame has status LED and a power
frame switch
The documents on HPE website
(http://h20566.www2.hpe.com/portal/site/hpsc/public/psi/home/?sp4ts.oid=5443167&ac.admitte
d=1471033205768.125225703.1938120508#manuals) describe the ports in detail along with
the interpretation of the LEDs.
4.5 Physical Interfaces Mapping
The physical interfaces provided by the HPE Networking products map to four FIPS 140-2
defined logical interface: data input, data output, control input and status output. Table 17
presents the mapping.
Table 17 Correspondence between Physical and Logical Interfaces
Physical Interface FIPS 140-2 Logical Interface
Networking ports Data Input Interface
Console port
Management Ethernet port
CF card slot
USB ports
Networking ports Data Output Interface
Console port
Management Ethernet port
CF card slot
USB ports
Networking ports Control Input Interface
Console port
Management Ethernet port
Power switches
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 69 of 120
Physical Interface FIPS 140-2 Logical Interface
Reset Switch
Port status LED mode switching button
Networking ports Status Output Interface
Console port
Management Ethernet port
LEDs
Power Slot Power Interface
Backplane
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 70 of 120
5 Roles, Services, and Authentication
5.1 Roles
The HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series provides 18
predefined roles and 64 custom user roles. There are 16 roles (0) in the device that operators
may assume:
 network-admin, level-15, level-9 and security-audit which are the FIPS Crypto-Officer Role,
 network-operator, level 0 ~ level 8, level 10 ~ level 14 and 64 custom user roles which are
defined as the FIPS User Role.
Table 18 presents the roles and roles description. The devices allow multiple management
users to operate the appliance simultaneously.
The HPE Networking switches do not employ a maintenance interface and do not have a
maintenance role.
Table 18 Roles and Role description
FIPS Role Comware Role
Name
Role Description
Crypto-Officer network-admin  Accesses all features and resources in the system, except
for the display security-logfile summary, info-center
security-logfile directory, and security-logfile save
commands.
level-15 Has the same rights as network-admin
Level-9 Has access to all features and resources except those in the
following list.
 RBAC non-debugging commands.
 Local users.
 File management.
 Device management.
 The display history-command all command.
security-audit Security log manager. The user role has the following access to
security log files:
 Access to the commands for displaying and maintaining
security log files (for example, the dir, display security-logfile
summary, and more commands).
 Access to the commands for managing security log files and
security log file system (for example, the info-center
security-logfile directory, mkdir, and security-logfile save
commands).
Only the security-audit user role has access to security log files.
User network-operator  Accesses the display commands for all features and
resources in the system, except for commands such as
display history-command all and display security-logfile
summary.
 Enables local authentication login users to change their own
password.
level-0 Has access to diagnostic commands, including ping, tracert,
and ssh2.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 71 of 120
level-1 Has access to the display commands of all features and
resources in the system except display history-command all.
The level-1 user role also has all access rights of the user role
level-0.
custom user
role;
level-2 to level-8;
level-10 to level-
14
Have no access rights by default. Access rights are
configurable.
5.2 Authentication Mechanisms
HPE networking devices support identity-based authentication, and role-based access control.
 Identity-based authentication
Each user is authenticated upon initial access to the device. The authentication is identity-
based. All users can be authenticated locally, and optionally supports authentication via a
RADIUS and TACACS+ server.
To logon to the appliances, an operator must connect to it through one of the management
interfaces (console port, SSH) and provide a password.
A user must be authenticated using usernames and passwords. The minimum password
length is 15 characters, and the maximum is 63. The passwords must contain at least one
lower case letter (26), one upper case letter (26), one special character (32) and one
numeric character (10). The remaining eleven characters can be a lower case letter (26), an
upper case letter (26), a special character (32) and/or a numeric character (10) equaling 94
possibilities per character. Therefore, for a 15 characters password, the probability of
randomly guessing the correct sequence is 1 in 3.16228xE^29
3
(this calculation is based on
the use of the typical standard American QWERTY computer keyboard).
In order to guess the password in 1 minute with close to probability 1 requires 3.16228xE^29
trials, which is stronger than the one in a million chance required by FIPS 140-2. By default,
the maximum number of consecutive failed login attempts is three and a user failing to log in
after the specified number of attempts must wait for one minute before trying again. Using
Anderson’s formula to calculate the probability of guessing a password in 1 minute:
 P probability of guessing a password in specified period of time
 G number of guesses tested in 1 time unit
 T number of time units
 N number of possible passwords
3
Calculation is: 94^15 (total combinations of alpha, numeric, and special characters) - 68^15 (combinations with no
uppercase letters) - 68^15 (combinations with no lowercase letters) - 84^15 (combinations with no numbers) - 62^15
(combinations with no special characters) + 42^15 (combinations with no uppercase letters and no lowercase letters) +
60^15 (combinations with no uppercase letters and no numbers) + 36^15 (combinations with no uppercase letters and
no special characters) + 60^15 (combinations with no lowercase letters and no numbers) + 36^15 (combinations with no
lowercase letters and no special characters) + 52^15 (combinations with no numbers and no special characters) - 24^15
(combinations with only uppercase letters) - 24^15 (combinations with only lowercase letters) - 10^15 (combinations
with only numbers) - 32^15 (combinations with only special characters) ≈ 3.16228xE^29
Calculation without text:
94^15 - 68^15 - 68^15 - 84^15 - 62^15 + 42^15 + 60^15 + 36^15 + 60^15 + 36^15 + 52^15 - 24^15 - 24^15 - 10^15 -
32^15 ≈ 3.16228xE^29
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 72 of 120
Then P >= T x G / N (9.48682E-30 = 1 x 3 / 3.16228xE^29)
The probability of guessing a password in 1 minute is 9.48682E-30.
To provide additional password security, Comware 7.1 provides additional limits to the
number of consecutive failed login attempts. If an FTP or VTY user fails authentication, the
system adds the user to a password control blacklist. If a user fails to provide the correct
password after the specified number of consecutive attempts, the system can take one of
the following actions, based on the administrator’s choice:
Blocks the user's login attempts until the user is manually removed from the
password control blacklist.
Blocks the user's login attempts within a configurable period of time, and allows the
user to log in again after the period of time elapses or the user is removed from the
password control blacklist.
HPE Networking devices can also use certificate credentials using 2048 bit RSA keys and
SHA-256; in such a case the security strength is 112 bits, so an attacker would have a 1 in
2^112 chance of a successful authentication which is much stronger than the one in a million
chance required by FIPS 140-2. Certificate credentials using ECDSA keys with curves
(P224, P-256, P-384, or P-521) and SHA algorithms (SHA-224, SHA-256, SHA-384, or
SHA-512) are also available and provide a minimum of 112 bits security.
The users who try to log in or switch to a different user privilege level can be authenticated
by RADIUS and TACACS+ Server. The minimum password length is 15 characters, and the
maximum is 63. Therefore, for a 15 characters password, the probability of randomly
guessing the correct sequence is one in 3.16228xE^29. The device (RADIUS client) and the
RADIUS server use a shared key to authenticate RADIUS packets and encrypt user
passwords exchanged between them. For more details, see RFC 2865: 3 Packet Format
Authenticator field and 5.2 User-password.
 Role-based access control
In HPE Comware 7.1.045, the command and resource access permissions are assigned to
roles.
Users are given permission to access a set of commands and resources based on the users'
user roles. Each user can have one or more roles. The user may alternate between
authorized roles after first authenticating to the module.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 73 of 120
6 Services, Key / CSP and Algorithm Tables
Assumptions, Assertions and Caveats
1. The preferred approach is to link Services to Keys/CSPs, Keys/CSPs to Algorithms and Algorithms to Services. When linkage is completed, there is a continuous loop among the
three tables.
2. For linking the tables together, the goals are:
 Confirm every Algorithm is listed at least once by a service.
 Provide a direct mapping of the algorithm to each service that uses it.
 Confirm every CSP is listed at least once by a service
 Provide a direct mapping of the service to each CSP that it uses.
 Provide a quick and easy way for the reviewer to navigate among the tables.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 74 of 120
6.1 Services
Assumptions, Assertions and Caveats
1. The services table is the main focus of the validation. Preferably, it should be listed before the CSP and Algorithm tables.
2. Each service should map to the Key(s) / CSP(s) used by the service. It is not required that each service map to a Key / CSP.
3. Each service should be uniquely identifiable so the entries in the Algorithm Table can easily map to a service.
Services Table Column Definitions
1. Description
Objective of this column is to provide a brief description of the service.
 This column shall include a description of the service.
 Where applicable the service description should describe the action being taken.
2. Input
Objective of this column is to list the input to the service.
 List the type of input such as command, configuration data or output of another service.
3. Output
Objective of this column is to list the output of the service.
 List the type of output generated by the service.
4. CSP Access
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 75 of 120
Objective of this column is to provide additional information about the CSP utilized by the service.
 Where applicable this column shall include the unique CSP identifier.
 The CSP identifier should contain a hyperlink to the entry in the CSP table.
5. Available to role
Objective of this column is to identify the role that can utilize the service.
 This column shall include the name of the role that can utilize the service.
Table 19 Crypto Officer Services
Description Input Output CSP Access Available to Role
View Device Status
1. View currently running image version Commands Status of devices None
Network-admin,
level-15,
level-9
2. View installed hardware components
status and version
Commands Status of devices None
Network-admin,
level-15,
level-9
View Running Status
3. View memory status, packet statistics,
interface status, current running image
version, current configuration, routing
table, active sessions, temperature and
SNMP MIB statistics.
Commands
Status of device
functions
None
Network-admin,
level-15,
level-9
Perform Network Functions
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 76 of 120
4. Network diagnostic service such as “ping” Commands
Status of
commands
None
Network-admin,
level-15,
level-9
5. Network connection service such as
“SSHv2” client
Commands and
configuration
data
Status of
commands and
configuration data
CSP1-1 RSA Public key (read)
CSP1-2 DSA Public key (read)
CSP1-3 ECDSA Public key (read)
CSP2-1 IPsec authentication keys
(read/write/delete)
CSP2-2 IPsec encryption keys (read/write/delete)
CSP2-3 IPsec authentication keys (read)
CSP2-4 IPsec encryption keys (read)
CSP3-1 IKE pre-shared keys (read)
CSP3-2 IKE RSA Authentication private Key
(read)
CSP3-3 IKE DSA Authentication private Key
(read)
CSP3-4 IKE Authentication key
(read/write/delete)
CSP3-5 IKE Encryption Key (read/write/delete)
CSP3-6 IKE Diffie-Hellman Public Key
(read/write/delete)
CSP3-7 IKE Diffie-Hellman Private Key
(read/write/delete)
CSP4-1 IKEv2 pre-shared keys (read)
CSP4-2 IKEv2 RSA Authentication private Key
(read)
CSP4-3 IKEv2 DSA Authentication private Key
(read)
CSP4-4 IKEv2 ECDSA Authentication private Key
(read)
CSP4-5 IKEv2 Authentication key
(read/write/delete)
CSP4-6 IKEv2 Encryption Key (read/write/delete)
CSP4-7 IKEv2 Diffie-Hellman Public Key
(read/write/delete)
CSP4-8 IKEv2 Diffie-Hellman Private Key
(read/write/delete)
CSP4-9 IKEv2 ECDH Public Key
(read/write/delete)
CSP4-10 IKEv2 ECDH Private Key
(read/write/delete)
CSP5-1 SSH RSA Private key (read)
CSP5-2 SSH ECDSA Private key (read)
Network-admin,
level-15,
level-9
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 77 of 120
CSP5-3 SSH Diffie-Hellman Public Key
(read/write/delete)
CSP5-4 SSH Diffie-Hellman Private Key
(read/write/delete)
CSP5-5 SSH ECDH Public Key
(read/write/delete)
CSP5-6 SSH ECDH Private Key
(read/write/delete)
CSP5-7 SSH Session encryption Key
(read/write/delete)
CSP5-8 SSH Session authentication Key
(read/write/delete)
CSP9-1 SNMPv3 Authentication Key (read)
CSP9-2 SNMPv3 Encryption Key (read)
CSP7-1 DRBG entropy input (read/write/delete)
CSP8-1 DRBG seed (read/write/delete)
CSP8-2 DRBG V (read/write/delete)
CSP8-3 DRBG Key (read/write/delete)
6. Provide SSHv2 service.
Commands and
configuration
data
Status of
commands and
configuration data
CSP1-1 RSA Public key (read)
CSP1-3 ECDSA Public key (read)
CSP5-1 SSH RSA Private key (read)
CSP5-2 SSH ECDSA Private key (read)
CSP5-3 SSH Diffie-Hellman Public Key
(read/write/delete)
CSP5-4 SSH Diffie-Hellman Private Key
(read/write/delete)
CSP5-5 SSH ECDH Public Key
(read/write/delete)
CSP5-6 SSH ECDH Private Key
(read/write/delete)
CSP5-7 SSH Session encryption Key
(read/write/delete)
CSP5-8 SSH Session authentication Key
(read/write/delete)
CSP6-1 User Passwords (read/write/delete)
CSP6-3 RADIUS shared secret keys (read)
CSP6-4 TACACS+ shared secret keys (read)
CSP7-1 DRBG entropy input (read/write/delete)
CSP8-1 DRBG seed (read/write/delete)
CSP8-2 DRBG V (read/write/delete)
CSP8-3 DRBG Key (read/write/delete)
Network-admin,
level-15,
level-9
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 78 of 120
7. Provide IKEv1/IKEv2/IPsec service to
protect the session between the router
and external server(e.g. Radius
Server/Log Server)
Commands and
configuration
data
Status of
commands and
configuration data
CSP1-1 RSA Public key (read)
CSP1-2 DSA Public key (read)
CSP1-3 ECDSA Public key (read)
CSP2-1 IPsec authentication keys
(read/write/delete)
CSP2-2 IPsec encryption keys (read/write/delete)
CSP2-3 IPsec authentication keys (read)
CSP2-4 IPsec encryption keys (read)
CSP3-1 IKE pre-shared keys (read)
CSP3-2 IKE RSA Authentication private Key
(read)
CSP3-3 IKE DSA Authentication private Key
(read)
CSP3-4 IKE Authentication key
(read/write/delete)
CSP3-5 IKE Encryption Key (read/write/delete)
CSP3-6 IKE Diffie-Hellman Public Key
(read/write/delete)
CSP3-7 IKE Diffie-Hellman Private Key
(read/write/delete)
CSP4-1 IKEv2 pre-shared keys (read)
CSP4-2 IKEv2 RSA Authentication private Key
(read)
CSP4-3 IKEv2 DSA Authentication private Key
(read)
CSP4-4 IKEv2 ECDSA Authentication private Key
(read)
CSP4-5 IKEv2 Authentication key
(read/write/delete)
CSP4-6 IKEv2 Encryption Key (read/write/delete)
CSP4-7 IKEv2 Diffie-Hellman Public Key
(read/write/delete)
CSP4-8 IKEv2 Diffie-Hellman Private Key
(read/write/delete)
CSP4-9 IKEv2 ECDH Public Key
(read/write/delete)
CSP4-10 IKEv2 ECDH Private Key
(read/write/delete)
CSP7-1 DRBG entropy input (read/write/delete)
Network-admin,
level-15,
level-9
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 79 of 120
CSP8-1 DRBG seed (read/write/delete)
CSP8-2 DRBG V (read/write/delete)
CSP8-3 DRBG Key (read/write/delete)
8. Provide SNMPv3 service.
Commands and
configuration
data
Status of
commands and
configuration data
CSP9-1 SNMPv3 Authentication Key (read)
CSP9-2 SNMPv3 Encryption Key (read)
CSP7-1 DRBG entropy input (delete)
CSP8-1 DRBG seed (delete)
CSP8-2 DRBG V (delete)
CSP8-3 DRBG Key (delete)
Network-admin,
level-15,
level-9
9. Initial Configuration setup (IP, hostname,
DNS server)
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
10. Change the role
Commands and
configuration
data
Status of
commands and
configuration data
CSP6-1 User Passwords (read)
CSP6-2 Super password (read)
CSP6-3 RADIUS shared secret keys (read)
CSP6-4 TACACS+ shared secret keys (read)
Network-admin,
level-15,
level-9
11. Reset and change the password of
same/lower privilege user
Commands and
configuration
data
Status of
commands and
configuration data
CSP6-1 User Passwords (write/delete)
Network-admin,
level-15,
level-9
12. Maintenance of the super password
Commands and
configuration
data
Status of
commands and
configuration data
CSP6-2 Super password (write/delete)
Network-admin,
level-15,
level-9
13. Maintenance (create, destroy, import,
export) of public key/private key/shared
key
Commands and
configuration
data
Status of
commands and
configuration data
CSP1-1 RSA Public key (read/write/delete)
CSP1-2 DSA Public key (read/write/delete)
CSP1-3 ECDSA Public key (read/write/delete)
CSP2-3 IPsec authentication keys
(read/write/delete)
CSP2-4 IPsec encryption keys (read/write/delete)
CSP3-1 IKE pre-shared keys (read/write/delete)
CSP3-2 IKE RSA Authentication private Key
(read/write/delete)
CSP3-3 IKE DSA Authentication private Key
(read/write/delete)
CSP4-1 IKEv2 pre-shared keys
(read/write/delete)
CSP4-2 IKEv2 RSA Authentication private Key
Network-admin,
level-15,
level-9
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 80 of 120
(read/write/delete)
CSP4-3 IKEv2 DSA Authentication private Key
(read/write/delete)
CSP4-4 IKEv2 ECDSA Authentication private Key
(read/write/delete)
CSP5-1 SSH RSA Private key (read/write/delete)
CSP5-2 SSH ECDSA Private key
(read/write/delete)
CSP9-1 SNMPv3 Authentication Key
(read/write/delete)
CSP9-2 SNMPv3 Encryption Key
(read/write/delete)
CSP7-1 DRBG entropy input (read/write/delete)
CSP8-1 DRBG seed (read/write/delete)
CSP8-2 DRBG V (read/write/delete)
CSP8-3 DRBG Key (read/write/delete)
14. Management (create, delete, modify) of
the user roles
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
15. Management of the access control rules
for each role
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
16. Management (create, delete, modify) of
the user account
Commands and
configuration
data
Status of
commands and
configuration data
CSP6-1 User Passwords (read/write/delete)
Network-admin,
level-15,
level-9
17. Management of the time
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
18. Maintenance (delete, modify) system
start-up parameters
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
19. File operation (e.g. dir, copy, del)
Commands and
configuration
data
Status of
commands and
configuration data
CSP11-1 Firmware Signature (write/delete)
Network-admin,
level-15,
level-9
20. Shut down or Reboot the security
appliance
Commands and
configuration
data
Status of
commands and
configuration data
CSP2-1 IPsec authentication keys (delete)
CSP2-2 IPsec encryption keys (delete)
CSP3-4 IKE Authentication key (delete)
CSP3-5 IKE Encryption Key (delete)
CSP4-5 IKEv2 Authentication key (delete)
CSP4-6 IKEv2 Encryption Key (delete)
CSP4-7 IKEv2 Diffie-Hellman Public Key (delete)
CSP4-8 IKEv2 Diffie-Hellman Private Key (delete)
Network-admin,
level-15,
level-9
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 81 of 120
CSP4-9 IKEv2 ECDH Public Key (delete)
CSP4-10 IKEv2 ECDH Private Key (delete)
CSP5-3 SSH Diffie-Hellman Public Key (delete)
CSP5-4 SSH Diffie-Hellman Private Key (delete)
CSP5-5 SSH ECDH Public Key (delete)
CSP5-6 SSH ECDH Private Key (delete)
CSP5-7 SSH Session encryption Key (delete)
CSP5-8 SSH Session authentication Key (delete)
CSP7-1 DRBG entropy input (delete)
CSP8-1 DRBG seed (delete)
CSP8-2 DRBG V (delete)
CSP8-3 DRBG Key (delete)
CSP11-1 Firmware Signature (read)
21. Maintenance of IKEv1/IKEv2/IPsec.
Commands and
configuration
data
Status of
commands and
configuration data
CSP1-1 RSA Public key (read/write/delete)
CSP1-2 DSA Public key (read/write/delete)
CSP1-3 ECDSA Public key (read/write/delete)
CSP2-3 IPsec authentication keys
(read/write/delete)
CSP2-4 IPsec encryption keys (read/write/delete)
CSP3-1 IKE pre-shared keys (read/write/delete)
CSP3-2 IKE RSA Authentication private Key
(read/write/delete)
CSP3-3 IKE DSA Authentication private Key
(read/write/delete)
CSP4-1 IKEv2 pre-shared keys
(read/write/delete)
CSP4-2 IKEv2 RSA Authentication private Key
(read/write/delete)
CSP4-3 IKEv2 DSA Authentication private Key
(read/write/delete)
CSP4-4 IKEv2 ECDSA Authentication private Key
(read/write/delete)
Network-admin,
level-15,
level-9
22. Maintenance of SNMPv3
Commands and
configuration
data
Status of
commands and
configuration data
CSP9-1 SNMPv3 Authentication Key
(read/write/delete)
CSP9-2 SNMPv3 Encryption Key
(read/write/delete)
Network-admin,
level-15,
level-9
23. Maintenance of SSHv2
Commands and
configuration
data
Status of
commands and
configuration data
CSP1-1 RSA Public key (read/write/delete)
CSP1-3 ECDSA Public key (read/write/delete)
CSP5-1 SSH RSA Private key (read/write/delete)
Network-admin,
level-15,
level-9
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 82 of 120
CSP5-2 SSH ECDSA Private key
(read/write/delete)
CSP5-7 SSH Session encryption Key
(read/write/delete)
CSP5-8 SSH Session authentication Key
(read/write/delete)
24. Perform self-test
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
25. Displaying and maintaining security log
files
Commands and
configuration
data
Status of
commands and
configuration data
None security-audit
Perform Configuration Functions
26. Save configuration
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
27. Management of information center
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
28. Define network interfaces and settings
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
29. Set the protocols the routers will
support(e.g. SFTP server, SSHv2 server)
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
30. Enable interfaces and network services
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
31. Management of access control scheme
Commands and
configuration
data
Status of
commands and
configuration data
None
Network-admin,
level-15,
level-9
32. Config managing security log files and
security log file system
Commands and
configuration
data
Status of
commands and
configuration data
None security-audit
33. Enable/Disable FIPS mode of operation
Commands and
configuration
data
Status of
commands and
configuration data
All private and session keys are zeroized when
switching between FIPS and non-FIPS modes
Network-admin,
level-15
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 83 of 120
34. Load firmware
4
Commands and
configuration
data
Status of
commands and
configuration data
CSP11-1 Firmware Signature (read)
Network-admin,
level-15
Table 20 User Services
Description Input Output CSP Access Available to Role
View Device Status
1. View currently running image version;
2. View installed hardware components status
and version
Commands Status of devices None
network-operator
level-1
View Running Status
3. View memory status, packet statistics,
interface status, current running image
version, current configuration, routing table,
active sessions, temperature and SNMP MIB
statistics.
Commands
Status of device
functions
None
network-operator
level-1
Perform Network Functions
4. Network diagnostic service such as “ping”;
Commands and
configuration data
Status of
commands and
configuration data
None
Level-0,
Level-1
5. Network connection service such as
“SSHv2” client.
Commands and
configuration data
Status of
commands and
configuration data
CSP1-1 RSA Public key (read)
CSP1-2 DSA Public key (read)
CSP1-3 ECDSA Public key (read)
CSP2-1 IPsec authentication keys
(read/write/delete)
CSP2-2 IPsec encryption keys (read/write/delete)
CSP2-3 IPsec authentication keys (read)
Level-0,
Level-1
4
New firmware versions within the scope of this validation must be validated through the FIPS 140-2 CMVP. Any other firmware loaded into this module is out of the scope of this validation and
requires a separate FIPS 140-2 validation.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 84 of 120
Description Input Output CSP Access Available to Role
CSP2-4 IPsec encryption keys (read)
CSP3-1 IKE pre-shared keys (read)
CSP3-2 IKE RSA Authentication private Key
(read)
CSP3-3 IKE DSA Authentication private Key
(read)
CSP3-4 IKE Authentication key (read/write/delete)
CSP3-5 IKE Encryption Key (read/write/delete)
CSP3-6 IKE Diffie-Hellman Public Key
(read/write/delete)
CSP3-7 IKE Diffie-Hellman Private Key
(read/write/delete)
CSP4-1 IKEv2 pre-shared keys (read)
CSP4-2 IKEv2 RSA Authentication private Key
(read)
CSP4-3 IKEv2 DSA Authentication private Key
(read)
CSP4-4 IKEv2 ECDSA Authentication private Key
(read)
CSP4-5 IKEv2 Authentication key
(read/write/delete)
CSP4-6 IKEv2 Encryption Key (read/write/delete)
CSP4-7 IKEv2 Diffie-Hellman Public Key
(read/write/delete)
CSP4-8 IKEv2 Diffie-Hellman Private Key
(read/write/delete)
CSP4-9 IKEv2 ECDH Public Key
(read/write/delete)
CSP4-10 IKEv2 ECDH Private Key
(read/write/delete)
CSP5-1 SSH RSA Private key (read)
CSP5-2 SSH ECDSA Private key (read)
CSP5-3 SSH Diffie-Hellman Public Key
(read/write/delete)
CSP5-4 SSH Diffie-Hellman Private Key
(read/write/delete)
CSP5-5 SSH ECDH Public Key (read/write/delete)
CSP5-6 SSH ECDH Private Key
(read/write/delete)
CSP5-7 SSH Session encryption Key
(read/write/delete)
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 85 of 120
Description Input Output CSP Access Available to Role
CSP5-8 SSH Session authentication Key
(read/write/delete)
CSP9-1 SNMPv3 Authentication Key (read)
CSP9-2 SNMPv3 Encryption Key (read)
CSP7-1 DRBG entropy input (delete)
CSP8-1 DRBG seed (delete)
CSP8-2 DRBG V (delete)
CSP8-3 DRBG Key (delete)
6. Provide SSHv2 service.
Commands and
configuration data
Status of
commands and
configuration data
CSP1-1 RSA Public key (read)
CSP1-3 ECDSA Public key (read)
CSP5-1 SSH RSA Private key (read)
CSP5-2 SSH ECDSA Private key (read)
CSP5-3 SSH Diffie-Hellman Public Key
(read/write/delete)
CSP5-4 SSH Diffie-Hellman Private Key
(read/write/delete)
CSP5-5 SSH ECDH Public Key (read/write/delete)
CSP5-6 SSH ECDH Private Key
(read/write/delete)
CSP5-7 SSH Session encryption Key
(read/write/delete)
CSP5-8 SSH Session authentication Key
(read/write/delete)
CSP6-1 User Passwords (read/write/delete)
CSP6-3 RADIUS shared secret keys (read)
CSP6-4 TACACS+ shared secret keys (read)
CSP7-1 DRBG entropy input (delete)
CSP8-1 DRBG seed (delete)
CSP8-2 DRBG V (delete)
CSP8-3 DRBG Key (delete)
Level-0,
Level-1
7. Provide IKEv1/IKEv2/IPsec service to protect
the session between the router and external
server(e.g. Radius Server/Log Server)
Commands and
configuration data
Status of
commands and
configuration data
CSP1-1 RSA Public key (read)
CSP1-2 DSA Public key (read)
CSP1-3 ECDSA Public key (read)
CSP2-1 IPsec authentication keys
(read/write/delete)
CSP2-2 IPsec encryption keys (read/write/delete)
CSP2-3 IPsec authentication keys (read)
CSP2-4 IPsec encryption keys (read)
CSP3-1 IKE pre-shared keys (read)
Level-0,
Level-1
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 86 of 120
Description Input Output CSP Access Available to Role
CSP3-2 IKE RSA Authentication private Key
(read)
CSP3-3 IKE DSA Authentication private Key
(read)
CSP3-4 IKE Authentication key (read/write/delete)
CSP3-5 IKE Encryption Key (read/write/delete)
CSP3-6 IKE Diffie-Hellman Public Key
(read/write/delete)
CSP3-7 IKE Diffie-Hellman Private Key
(read/write/delete)
CSP4-1 IKEv2 pre-shared keys (read)
CSP4-2 IKEv2 RSA Authentication private Key
(read)
CSP4-3 IKEv2 DSA Authentication private Key
(read)
CSP4-4 IKEv2 ECDSA Authentication private Key
(read)
CSP4-5 IKEv2 Authentication key
(read/write/delete)
CSP4-6 IKEv2 Encryption Key (read/write/delete)
CSP4-7 IKEv2 Diffie-Hellman Public Key
(read/write/delete)
CSP4-8 IKEv2 Diffie-Hellman Private Key
(read/write/delete)
CSP4-9 IKEv2 ECDH Public Key
(read/write/delete)
CSP4-10 IKEv2 ECDH Private Key
(read/write/delete)
CSP7-1 DRBG entropy input (read/write/delete)
CSP8-1 DRBG seed (read/write/delete)
CSP8-2 DRBG V (read/write/delete)
CSP8-3 DRBG Key (read/write/delete)
8. Provide SNMPv3 service.
Commands and
configuration data
Status of
commands and
configuration data
CSP9-1 SNMPv3 Authentication Key (read)
CSP9-2 SNMPv3 Encryption Key (read)
CSP7-1 DRBG entropy input (read/write/delete)
CSP8-1 DRBG seed (read/write/delete)
CSP8-2 DRBG V (read/write/delete)
CSP8-3 DRBG Key (read/write/delete)
Level-0,
Level-1
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 87 of 120
6.1.2 Unauthenticated Services
 Cycle the power on the switch
 View currently running image version;
 View installed hardware components status and version
 View memory status, packet statistics, interface status, current running image version, current configuration, routing table, active sessions,
temperature and SNMP MIB statistics
6.1.3 Non-Approved Services
The HPE network switches supports the following non-approved services:
 Internet Key Exchange (IKE) or Internet Protocol Security (IPsec) with AES-XCBC-MAC, Camellia, DES, Triple-DES, MD5, HMAC-MD5, Diffie-
Hellman (<2048-bits), RSA (< 2048-bits), DSA (< 2048-bits).
 Perform Network Time Protocol (NTP) service.
 Perform Secure Socket Layer (SSL) or Transport Layer Security (TLS).
 Perform Secure Shell version 1.x.
 Perform Secure Shell version 2.0 with DES, Triple-DES, MD5, HMAC-MD5, Diffie-Hellman (<2048-bits), RSA (< 2048-bits), DSA (<2048-bits)
 Perform Telnet
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 88 of 120
6.2 Critical Security Parameters
5
Critical security parameter (CSP): security-related information (e.g., secret and private cryptographic keys, and authentication data such as passwords and PINs)
whose disclosure or modification can compromise the security of a cryptographic module.
6
Assumptions, Assertions and Caveats
1. Preferably, the Key / CSP Table should be listed after the Services Table.
2. Each Key(s) / CSP(s) must be mapped to by a service. A Key / CSP cannot exist unless associated with a service.
3. Each Key / CSP should be uniquely identifiable so the entries in the Services Table can easily map to a Key / CSP.
4. The DH key pairs should be 2 entries in the table. One for the public key and one for the private key – since the key lengths are different
 Each public key should be in its own row.
 Each private key should be in its own row.
5. For all RSA keys, state whether it is used for key transport or signature generation/verification.
 Key transport should be in its own row.
 Signature generation/verification should be in its own row.
6. Where possible, group Key / CSP together e.g. Keys associated with a protocol should be grouped together.
KEY / CSP Table Column Definitions
1. Key / CSP #
Unique identifier of CSP
2. Key or CSP Name
Objective of this column is the list the type of key or CSP used by the cryptographic module.
5
FIPS Pub 140-2
6
In Comware, CSPs generated in FIPS mode cannot be used in non-FIPS mode, and vice versa.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 89 of 120
 To avoid confusion wherever possible it is recommended that the name of the key/CSP be consistent with a recognized industry standard such as ISO, IETF or NIST Special
Publication.
3. Key/CSP Type & Algorithm Link
Objective of this column is to provide additional information about the CSP.
 Where applicable this column shall include the type of key/CSP, algorithm(s) (including reference to FIPS or NIST SP).
 The Algorithm link points to the Algorithm in the Algorithm table the Key/CSP uses.
4. Key size
Size of the key used by the CSP.
5. Use
The objective of this column is to provide information on how the key is used during cryptographic module operation.
 This column should contain a short description of the Key/CSP.
 It is important that each CSP is mapped directly from an Approved service that the cryptographic module performs.
 For all RSA keys, this column shall specify whether it is used for key transport or signature generation/verification
6. Generation/Input
The objective of this column is to specify how and when the CSP is generated, derived or enters the module.
 If the CSP is generated or derived, this column shall specify the function or technique responsible.
 If the CSP is entered, the column shall specify if the CSP is entered electronically or manually.
 The column shall specify if it is stored encrypted or in plaintext form.
 If the CSP is ephemeral this column shall specify conditions upon which it is generated (A cryptographic key is called ephemeral if it is generated for each execution of a key
establishment process.).
7. Storage
The objective of this column is to specify where the CSP is stored during cryptographic module operation.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 90 of 120
 The column shall also state the location and type of storage.
 The column shall state if the CSP is persistent, ephemeral or hardcoded.
 The column shall specify if it is stored encrypted or in plaintext form.
 The column shall specify if only a pointer or reference to the CSP is stored or the actual CSP.
8. Output
The objective of this column is to specify if the CSP can be output from the cryptographic module.
 If the CSP can be output, the column shall specify how it can be output.
 If the CSP can be output, the column shall specify if it is encrypted or plaintext form.
9. Zeroization
The objective of this column is to provide details on how the CSP shall be zeroized.
 All possible zeroization techniques for the CSP shall be listed.
Table 21 Critical Security Parameters
#
Key /
CSP Name
Key / CSP Type
Key Size Use
Generation
7
/
Input
Storage Output Zeroization
Algorithm Link
Public key management
CSP1-1 RSA public key
RSA
2048 bits
Identity certificates for the
security appliance itself.
Electronically
generated FLASH (cipher
text / AES256)
Plaintext
Using CLI command to
zeroize.
RSA-1
RSA-2
7 7
For all keys marked as “Electronically generated”, the resulting symmetric key or the generated seed to be used in the asymmetric key generation is an unmodified output from the DRBG.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 91 of 120
#
Key /
CSP Name
Key / CSP Type
Key Size Use
Generation
7
/
Input
Storage Output Zeroization
Algorithm Link
RSA-3
RSA-4
CSP1-2 DSA public key
DSA
2048 bits
Identity certificates for the
security appliance itself.
Electronically
generated FLASH (cipher
text / AES256)
Plaintext
Using CLI command to
zeroize
DSA-1
DSA-2
DSA-3
DSA-4
CSP1-3 ECDSA public key
ECDSA
NIST P256,
P384, P521
Identity certificates for the
security appliance itself
and also used in IPsec,
SSH and SSL.
Electronically
generated FLASH (cipher
text / AES256)
Plaintext
Using CLI command to
zeroize
ECDSA-1
ECDSA-3
ECDSA-4
IPsec
CSP2-1
IPsec
authentication keys
HMAC-SHA1-96
HMAC-SHA-256-
128
HMAC-SHA-384-
192
HMAC-SHA-512-
256
GMAC-128
GMAC-192
HMAC:
160 bits
256 bits
384 bits
512 bits
AES GMAC:
128 bits
Used to authenticate the
IPsec traffic
Electronically
generated
RAM (plain text) No
Automatically when
session expires.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 92 of 120
#
Key /
CSP Name
Key / CSP Type
Key Size Use
Generation
7
/
Input
Storage Output Zeroization
Algorithm Link
GMAC-256 192 bits
256 bits
HMAC-1
HMAC-2
AES-1
AES-2
CSP2-2
IPsec encryption
keys
AES 128 bits, 192
bits,
256 bits
Used to encrypt the IPsec
traffic
Electronically
generated
RAM (plain text) No
Automatically when
session expires.
AES-1
AES-2
CSP2-3
IPsec
authentication keys
HMAC-SHA1-96
HMAC-SHA-256-
128
HMAC-SHA-384-
192
HMAC-SHA-512-
256
GMAC-128
GMAC-192
GMAC-256
160 bits
HMAC:
160 bits
256 bits
384 bits
512 bits
AES GMAC:
128 bits
192 bits
256 bits
Used to authenticate the
IPsec traffic with
manually configured
secure associations
Manually entered
by the Crypto-
Officer
FLASH (cipher
text / AES-CTR
256) and RAM
(plain text)
Encrypted
Keys will be zeroized
using CLI commands
“undo sa hex-key
authentication …” and
“ save”,
HMAC-1
HMAC-2
AES-1
AES-2
CSP2-4 IPsec encryption AES 128 bits, 192 Used to encrypt the IPsec Manually entered FLASH (cipher Encrypted Keys will be zeroized
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 93 of 120
#
Key /
CSP Name
Key / CSP Type
Key Size Use
Generation
7
/
Input
Storage Output Zeroization
Algorithm Link
keys
AES-1
AES-2
bits,
256 bits
traffic with manually
configured secure
associations
by the Crypto-
Officer
text / AES-CTR
256) and RAM
(plain text)
using CLI commands
“undo sa hex-key
encryption …” and
“ save”,
IKEv1
CSP3-1
IKE pre-shared
keys
Shared Secret
15 ~ 128 bytes
Used for authentication
during IKE
Manually entered
by the Crypto-
Officer
FLASH(cipher
text/ AES-CTR-
256) and RAM
(cipher text/
AES-CTR-256)
Encrypted
Using CLI command to
zeroize
AES-2
CSP3-2
IKE RSA
Authentication
private Key
RSA
2048 bits
private key used for IKE
protocol during the
handshake
Electronically
generated
OR
Externally
generated; input
in ciphertext
RAM (plain text) No
Automatically when
handshake finishing
RSA-1
RSA-3
RSA-4
CSP3-3
IKE DSA
Authentication
private Key
DSA
256 bits
private key used for IKE
protocol during the
handshake
Electronically
generated
OR
Externally
generated; input
in ciphertext
RAM (plain text) No
Automatically when
handshake finishing
DSA-3
DSA-4
CSP3-4
IKE Authentication
key
HMAC-SHA1,
HMAC-SHA256
HMAC-HA384,
HMAC-SHA512
160 bits
256 bits
384 bits,
512 bits
Used to authenticate IKE
negotiations
Electronically
generated
RAM (plain text) No
Automatically when
session expires.
HMAC-2
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 94 of 120
#
Key /
CSP Name
Key / CSP Type
Key Size Use
Generation
7
/
Input
Storage Output Zeroization
Algorithm Link
CSP3-5 IKE Encryption Key
AES 128 bits, 192
bits,
256 bits
Used to encrypt IKE
negotiations
Electronically
generated
RAM (plain text) No
Automatically when
session expires.
AES-2
CSP3-6
IKE Diffie-Hellman
Public Key
DH
2048 bits Key agreement for IKE
Electronically
generated
RAM (plain text) No
Automatically when
handshake finishing
CVL-1
CSP3-7
IKE Diffie-Hellman
Private Key
DH DH Group 14:
2048 bits
DH Group 24:
256 bits
Key agreement for IKE
Electronically
generated
RAM (plain text) No
Automatically when
handshake finishing
CVL-1
IKEv2
CSP4-1
IKEv2 pre-shared
keys
Shared Secret
15 ~ 128 bytes
Used for authentication
during IKEv2
Manually entered
by the Crypto-
Officer
FLASH(cipher
text/ AES-CTR-
256) and RAM
(cipher text/
AES-CTR-256)
Encrypted
Using CLI command to
zeroize
AES-2
CSP4-2
IKEv2 RSA
Authentication
private Key
RSA
2048 bits
private key used for
IKEv2 protocol during the
handshake
Electronically
generated
OR
Externally
generated; input
in ciphertext
RAM (plain text) No
Automatically when
handshake finishing
RSA-1
RSA-3
RSA-4
CSP4-3
IKEv2 DSA
Authentication
DSA 256 bits
private key used for
IKEv2 protocol during the
Electronically
generated
RAM (plain text) No
Automatically when
handshake finishing
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 95 of 120
#
Key /
CSP Name
Key / CSP Type
Key Size Use
Generation
7
/
Input
Storage Output Zeroization
Algorithm Link
private Key
DSA-3
DSA-4
handshake OR
Externally
generated; input
in ciphertext
CSP4-4
IKEv2 ECDSA
Authentication
private Key
ECDSA
ECDSA:P-256,
P-384, P-521
private key used for
IKEv2 protocol during the
handshake
Electronically
generated
OR
Externally
generated; input
in ciphertext
RAM (plain text) No
Automatically when
handshake finishing
ECDSA-3
ECDSA-4
CSP4-5
IKEv2
Authentication key
HMAC-SHA1,
HMAC-SHA256
HMAC-HA384,
HMAC-SHA512
160 bits
256 bits
384 bits,
512 bits
Used to authenticate
IKEv2 negotiations
Electronically
generated
RAM (plain text) No
Automatically when
session expires.
HMAC-2
CSP4-6
IKEv2 Encryption
Key
AES 128 bits, 192
bits,
256 bits
Used to encrypt IKEv2
negotiations
Electronically
generated
RAM (plain text) No
Automatically when
session expires.
AES-2
CSP4-7
IKEv2 Diffie-
Hellman Public
Key
DH
2048 bits Key agreement for IKEv2
Electronically
generated
RAM (plain text) No
Automatically when
handshake finishing
CVL-1
CSP4-8
IKEv2 Diffie-
Hellman Private
DH
DH Group 14:
2048 bits
Key agreement for IKEv2
Electronically
generated
RAM (plain text) No
Automatically when
handshake finishing
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 96 of 120
#
Key /
CSP Name
Key / CSP Type
Key Size Use
Generation
7
/
Input
Storage Output Zeroization
Algorithm Link
Key
CVL-1
DH Group 24:
256 bits
CSP4-9
IKEv2 ECDH
Public Key
ECDH
P-256, P-384 Key agreement for IKEv2
Electronically
generated
RAM (plain text) No
Automatically when
handshake finishing
CVL-2
CSP4-10
IKEv2 ECDH
Private Key
ECDH
P-256: 256 bits
P-384: 384 bits
Key agreement for IKEv2
Electronically
generated
RAM (plain text)
No
Automatically when
handshake finishing
CVL-2
SSH
CSP5-1
SSH RSA
Private key
RSA
2048 bits
private key used for SSH
protocol
Electronically
generated
OR
Externally
generated; input
in ciphertext
RAM(plain text) No
Automatically when
handshake finishing
RSA-1
RSA-3
RSA-4
CSP5-2
SSH ECDSA
Private key
ECDSA
P-256, P-384
private key used for SSH
protocol
Electronically
generated
OR
Externally
generated; input
in ciphertext
RAM(plain text) No
Automatically when
handshake finishing
ECDSA-3
ECDSA-4
CSP5-3
SSH Diffie-Hellman
Public Key
DH
2048 bits
Public key agreement for
SSH sessions.
Electronically
generated
RAM (plain text) No
Automatically when
handshake finishing
CVL-1
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 97 of 120
#
Key /
CSP Name
Key / CSP Type
Key Size Use
Generation
7
/
Input
Storage Output Zeroization
Algorithm Link
CSP5-4
SSH Diffie-Hellman
Private Key
DH
2048 bits
Private key agreement for
SSH sessions.
Electronically
generated
RAM (plain text) No
Automatically when
handshake finishing
CVL-1
CSP5-5
SSH ECDH Public
Key
ECDH
P-256, P-384
Public key agreement for
SSH sessions.
Electronically
generated
RAM (plain text) No
Automatically when
handshake finishing
CVL-2
CSP5-6
SSH ECDH Private
Key
ECDH
P-256, P-384
Private key agreement for
SSH sessions.
Electronically
generated
RAM (plain text)
No
Automatically when
handshake finishing
CVL-2
CSP5-7
SSH Session
encryption Key
AES
128 bits,
256 bits
SSH session symmetric
key
Electronically
generated
RAM (plain text)
No
Automatically when SSH
session terminated
AES-2
CSP5-8
SSH Session
authentication Key
HMAC
160 bits, 96
bits
SSH session
authentication key
Electronically
generated
RAM (plain text) No
Automatically when SSH
session terminated
HMAC-2
Authentication
CSP6-1 User Passwords
Secret
15 ~ 63 bytes
Used to authenticate the
administrator login.
Manually entered
by the Crypto-
Officer
FLASH (cipher
text / AES256)
Encrypted
Using CLI command to
zeroize
AES-2
CSP6-2 Super password
Secret
15 ~ 63 bytes
Used to authenticate the
user role.
Manually entered
by the Crypto-
Officer
FLASH (cipher
text / AES256)
Encrypted
Using CLI command to
zeroize
AES-2
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 98 of 120
#
Key /
CSP Name
Key / CSP Type
Key Size Use
Generation
7
/
Input
Storage Output Zeroization
Algorithm Link
CSP6-3
RADIUS shared
secret keys
Shared Secret
15 ~ 64 bytes
Used for authenticating
the RADIUS server to the
security appliance and
vice versa.
Manually entered
by the Crypto-
Officer
FLASH (cipher
text / AES256)
Encrypted
Using CLI command to
zeroize
AES-2
CSP6-4
TACACS+ shared
secret keys
Shared Secret
15~255 bytes
Used for authenticating
the TACACS+ server to
the security appliance
and vice versa.
Manually entered
by the Crypto-
Officer
FLASH (cipher
text / AES256)
Encrypted
Using CLI command to
zeroize
AES-2
Entropy
CSP7-1
DRBG entropy
input
SP 800-90A
CTR_DRBG
256 bits
Entropy source used to
construct seed
Electronically
generated
RAM
(plaintext)
No
Resetting or rebooting
the security appliance
DRBG-1
Random Bits Generation
CSP8-1 DRBG seed
SP 800-90A
CTR_DRBG 384 bits
Input to the DRBG that
determines the internal
state of the DRBG
Electronically
generated
RAM
(plaintext)
Never exits the
module
Resetting or rebooting
the security appliance
DRBG-1
CSP8-2 DRBG V
SP 800-90A
CTR_DRBG
128 bits
Generated by entropy
source via the
CTR_DRBG derivation
function. It is stored in
DRAM with plaintext form
Electronically
generated
RAM
(plaintext)
Never exits the
module
Resetting or rebooting
the security appliance
DRBG-1
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 99 of 120
#
Key /
CSP Name
Key / CSP Type
Key Size Use
Generation
7
/
Input
Storage Output Zeroization
Algorithm Link
CSP8-3 DRBG Key
SP 800-90A
CTR_DRBG
256 bits
AES key used for SP
800-90A CTR_DRBG
Electronically
generated
RAM (plaintext)
Never exits the
module
Resetting or rebooting
the security appliance
DRBG-1
SNMPv3
CSP9-1
SNMPv3
Authentication Key
HMAC-SHA1
160 bits
Used to verify SNMPv3
packet.
Manually entered
by the Crypto-
Officer or
electronically
derived from
SP800-135 KDF
FLASH (cipher
text / AES256)
RAM (plain text)
Encrypted
Using CLI command to
zeroize
HMAC-2
CSP9-2
SNMPv3
Encryption Key
AES
128 bits
Used to encrypt SNMPv3
packet.
Manually entered
by the Crypto-
Officer
FLASH (cipher
text / AES256)
RAM (plain text)
Encrypted
Using CLI command to
zeroize
AES-2
System KEK
CSP10-1 Key encrypting key
AES
256 bits
Used to encrypt all
private key, user
password, and pre-
shared key stored on
internal storage. The
KEK is generated using
random bytes
Electronically
generated
RAM
(plain text)
No
Zeroized when Resetting
or rebooting the security
appliance
AES-1
AES-2
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 100 of 120
#
Key /
CSP Name
Key / CSP Type
Key Size Use
Generation
7
/
Input
Storage Output Zeroization
Algorithm Link
System Firmware
CSP11-1
Firmware
Signature
RSA 2048 bits
Factory signature used to
verify Comware 7
firmware.
Generated by
HPE Comware 7
Build Team
FLASH (binary
images)
Binary image
Upon deletion of binary
image.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 101 of 120
6.3 Approved Algorithms
Assumptions, Assertions and Caveats
1. Each instantiation of the algorithm should be in a separate table
 e.g. kernel, firmware, accelerators
 e.g. chassis / controller
2. Each instantiation of the algorithm should be uniquely identifiable so the Key / CSP can easily map to an algorithm.
3. Include a reference to the FIPS 140-2 approved standard for each algorithm. One example is to use a footnote.
4. The ECB mode is required for all other AES modes. The ECB mode should be listed as not used by the module if ECB is only used to support the other modes. If the ECB mode is
used by one or more services, it should be listed as available. Although ECB is the basis for all other AES modes, it is latent functionality if there is no service that uses it.
5. Each instantiation of the algorithm must map to the service that uses it.
6. To expedite the review process, each instantiation of the algorithm should have a hyperlink to the CAVP page that contains the certification listing.
7. It is important to identify which algorithms are used by the module and which are not. All functionality listed on the CAVP certificate should be detailed somewhere in the tables,
footnotes, or text of the Security Policy. If all of the functionality is used by the module, then all algorithm functionality belongs in the tables. If some functionality is not used by
the module, then the author should determine the best to convey that to the reader. (The Tables use footnotes. But there are other ways to convey this information.)
Algorithm Table Column Definitions
1. Algorithm #
Unique identifier of the algorithm. Each instantiation should be uniquely identified.
2. CAVP Certificate
Objective of this column is identify the CAVP certificate.
 The certificate number should be listed.
 A hyperlink should be create to the CAVP website to the certificate number.
3. Algorithm
Objective of this column is identify the Algorithm in use.
 The algorithm name should be consistent with the names list on the Cryptographic Algorithm Validation Program (CAVP) website.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 102 of 120
 The acronym may be used instead of the full name.
 Include a reference to the FIPS 140-2 approved standard for each algorithm.
4. Mode / Method
Objective of this column is identify the Mode / Method used by the algorithm.
5. Key Lengths, Curves or Moduli
Objective of this column is identify the Key Lengths, Curves or Moduli used by the algorithm.
6. Use
Objective of this column is identify the use of the algorithm.
7. Service that uses Algorithm
Objective of this column is identify the services that use the algorithm.
 A cross reference should be made to the unique identifier in a services table
 The cross reference should contain a hyperlink to the entry in a services table.
 The relationship of algorithm to service maybe one-to-one, one-to-many, or many-to-many.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 103 of 120
Table 22 Comware V7 Kernel – Approved Algorithms
#
CAVP
Certificates
Algorithm Mode/ Method
Key Lengths,
Curves or Moduli
Use
Service that uses
Algorithm
AES-1
4095
4097
4098
AES
8 ECB
9
, CBC
10
, CTR, GCM
11
,
GMAC
128, 192, 256
Kernel – Data
Encryption/ Decryption
Crypto Officer Services
(7, 21, 24)
User Services
(7)
HMAC-1
2675
2677
2678
HMAC
12
HMAC SHA-1
13 Kernel - Message
Authentication
Crypto Officer Services
(7, 21, 24)
User Services
(7)
SHS-1
3371
3373
3374
SHS
14
SHA-1
15
Kernel – Message
Digest
Crypto Officer Services
(7, 21, 24)
User Services
(7)
TDES-1
16
2238 Triple-DES
17
TECB
18
, TCBC 192 Crypto Officer Services
8
FIPS 197
9
Not used by the module
10
SP 800-38A
11
The module's AES-GCM implementation conforms to IG A.5 scenario #1 following RFC 6071 for IPsec and RFC 5288 for TLS. The module uses a 96-bit IV, which is
comprised of a 4 byte salt unique to the crypto session and 8 byte monotonically increasing counter. The module generates new AES-GCM keys if the module loses power.
12
FIPS 198-1
13
Comware Kernel supports various options for HMAC, however, only those listed in the table are utilized for any service other than self-tests.
14
FIPS 180-4
15
Comware Kernel supports various options for SHA, however, only those listed in the table are utilized.
16
Although the certification contains Triple-DES, Triple-DES is used only for self-tests in the approved mode.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 104 of 120
#
CAVP
Certificates
Algorithm Mode/ Method
Key Lengths,
Curves or Moduli
Use
Service that uses
Algorithm
2240
2241
(24)
User Services
none
17
SP 800-67
18
Not used by the module
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 105 of 120
Table 23 Comware V7 Firmware – Approved Algorithms
#
CAVP
Certificate
Algorithm Mode/ Method
Key Lengths or
Curves
Use
Service that uses
Algorithm
AES-2
4090
4092
4093
AES
19 ECB
20
, CBC, CTR, GCM
21
,
GMAC, KW
22 128, 192, 256
Data Encryption/
Decryption
Crypto Officer Services
(5, 6, 7, 8, 11, 12, 13,
21, 22a, 23a, 24)
User Services
(5, 6, 7, 8)
CVL-1
23
906
910
912
CVL
24
IKEv1, IKEv2
TLS 1.0/1.1
25
SSH, SNMPv3
KDFs
Key Derivation
Crypto Officer Services
(5, 6, 7, 8, 24)
User Services
(5, 6, 7, 8)
DRBG-1
1228
1230
1231
DRBG
26
CTR (AES-256)
Deterministic Random
Bit Generation
Crypto Officer Services
(5, 6, 7, 8, 13, 24)
User Services
19
FIPS 197, SP 800-38A, SP 800-38D
20
Not used by the module
21
The module's AES-GCM implementation conforms to IG A.5 scenario #1 following RFC 6071 for IPsec and RFC 5288 for TLS. The module uses a 96-bit IV, which is
comprised of a 4 byte salt unique to the crypto session and 8 byte monotonically increasing counter. The module generates new AES-GCM keys if the module loses power.
22
Not used by the module
23
Component Validation: the protocols covered under this certificate have not been reviewed or tested by the CAVP or CMVP
24
SP 800-135rev1
25
Although the certification contains TLS, it is not used by this version of Comware in the approved mode.
26
SP 800-90A
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 106 of 120
#
CAVP
Certificate
Algorithm Mode/ Method
Key Lengths or
Curves
Use
Service that uses
Algorithm
(5, 6, 7, 8)
DSA-1
1111
1113
1114
DSA
27
SHA-256, SHA-384, SHA-512 (2048,256) Domain Parameter
Generation
Crypto Officer Services
(13, 24)
User Services
(none)
DSA-2 (2048,256) Key Pair Generation
Crypto Officer Services
(13, 24)
User Services
(none)
DSA-3
SHA-224, SHA-256
SHA-384, SHA-512
(2048,256) Digital Signature
Generation
Crypto Officer Services
(5, 6, 7, 24)
User Services
(5, 6, 7)
DSA-4
SHA-1, SHA-224, SHA-256
SHA-384, SHA-512
(1024,160)
(2048,256)
Digital Signature
Verification
Crypto Officer Services
(5, 6, 7, 24)
User Services
(5, 6, 7)
CVL-2
905
909
911
CVL –
EC Diffie-
Hellman
Primitive
28
P-224, P-256,
P-384, P-521
Shared Secret for Key
Agreement Scheme
Crypto Officer Services
(5, 6, 7)
User Services
(5, 6, 7)
27
FIPS 186-4
28
SP 800-56A, Section 5.7.1.2: ECC CDH Primitive
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 107 of 120
#
CAVP
Certificate
Algorithm Mode/ Method
Key Lengths or
Curves
Use
Service that uses
Algorithm
ECDSA-1
924
926
927
ECDSA
29
P-224, P-256,
P-384, P-521
Key Pair Generation
Crypto Officer Services
(13, 24)
User Services
(none)
ECDSA-2
SHA-224, SHA-256,
SHA-384, SHA-512
P-224, P-256,
P-384, P-521
Digital Signature
Generation
Crypto Officer Services
(5, 6, 7, 24)
User Services
5, 6, 7
ECDSA-3
SHA-1, SHA-224, SHA-256,
SHA-384, SHA-512
P-192, P-224, P-
256,
P-384, P-521
Digital Signature
Verification
Crypto Officer Services
(5, 6, 7, 24)
User Services
5, 6, 7
HMAC-2
2670
2672
2673
HMAC
30
HMAC SHA-1, HMAC SHA-
224, HMAC SHA-256, HMAC
SHA-384, HMAC SHA-512
Message Authentication
Crypto Officer Services
(5, 6, 7, 8, 24)
User Services
(5, 6, 7, 8)
RSA-1
2214
2216
2217
RSA
31 SHA-1
PKCS1 v.1.5
2048 Digital Signature
Verification
Crypto Officer Services
(5, 6, 7)
User Services
5, 6, 7
29
FIPS 198-1
30
FIPS 198-1
31
FIPS 186-2
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 108 of 120
#
CAVP
Certificate
Algorithm Mode/ Method
Key Lengths or
Curves
Use
Service that uses
Algorithm
RSA-2
RSA
32
Random Public Exponent e 2048 Key Pair Generation
Crypto Officer Services
(13, 24)
User Services
(none)
RSA-3
SHA-224, SHA-256,
SHA-384, SHA-512
PKCS1 v.1.5
2048 Digital Signature
Generation
Crypto Officer Services
(7, 24)
User Services
(7)
RSA-4
SHA-1, SHA-224, SHA-256,
SHA-384, SHA-512
PKCS1 v1.5
2048 Digital Signature
Verification
Crypto Officer Services
(5, 6, 7, 24)
User Services
(5, 6, 7)
SHS-2
3366
3368
3369
SHS
33
SHA-1, SHA-224, SHA-256,
SHA-384, SHA-512
Message Digest
Crypto Officer Services
(5, 6, 7, 8, 11, 12, 21,
22a, 24)
User Services
(5, 6, 7, 8)
TDES-2
34
2233
2235
Triple-DES
35
TECB, TCBC 192
Crypto Officer Services
(24)
32
FIPS 186-4
33
FIPS 180-4
34
Although the certification contains Triple-DES, Triple-DES is used only for self-tests in the approved mode.
35
SP 800-67
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 109 of 120
#
CAVP
Certificate
Algorithm Mode/ Method
Key Lengths or
Curves
Use
Service that uses
Algorithm
2236 User Services
none
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 110 of 120
6.4 Allowed Algorithms
Table 24 Comware V7 Firmware - Allowed Algorithms
Algorithm Caveat Use Service that uses
Algorithm
Diffie-Hellman Provides 112 bits of encryption strength. Key establishment
Crypto Officer Services
(5, 6, 7)
User Services
(5, 6, 7)
Elliptic Curve Diffie-Hellman
Supported curves: P-256 and
P-384
Provides 128 and 192-bits of encryption
strength.
Key establishment
Crypto Officer Services
(5, 6, 7)
User Services
(5, 6, 7)
HMAC-SHA1-96
Hash Message Authentication Code
truncated to 96-bits.
SSH and IPsec
Authentication
Crypto Officer Services
(5, 6, 7)
User Services
(5, 6, 7)
NDRNG
36 A minimum of 256-bits of entropy is
obtained before generating keys.
Seeding for the DRBG
Crypto Officer Services
(none)
User Services
(none)
36
This implementation satisfies Scenario 1(a) of IG 7.14.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 111 of 120
6.5 Non-Approved Algorithms
Table 25 Non-Approved Algorithms37
Algorithm Use Service that uses
Algorithm
AES (non-compliant) Encryption / Decryption IKEv2, IPSEC
Camellia Encryption / Decryption IKEv2, IPSEC, SSH
DES Encryption / Decryption IKEv1/v2, IPSEC, SSH,
SSL
Diffie-Hellman Key Establishment - Non-compliant
less than 112 bits of encryption
strength
IKEv1/v2, IPSEC, SSH,
SSL, TLS
DSA (FIPS 186-2) Digital Signature Generation IKEv1/v2, IPSEC, SSH
DSA (FIPS 186-4) Digital Signature Generation IKEv1/v2, IPSEC, SSH
ECDSA (FIPS 186-2) Digital Signature Generation IKEv1/v2, IPSEC, SSH,
SSL, TLS
ECDSA (FIPS 186-4; non-compliant) Digital Signature IKEv1/v2, IPSEC, SSH,
SSL, TLS
HMAC-MD5 Keyed Hash IKEv1/v2, IPSEC, SSH,
SSL, TLS
37
Please see NIST document SP800-131A for guidance regarding the use of non FIPS-approved algorithms
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch Series
Page 112 of 120
MD5 Hashing IKEv1/v2, IPSEC, SSH,
SSL, TLS
RC2 Encryption / Decryption SSL
RC4 Encryption / Decryption SSL
RNG (ANSI x9.31) Random Number Generation Self-test
RSA (FIPS 186-2) Asymmetric Key Generation IKEv1/v2, IPSEC, SSH,
SSL, TLS
RSA Key Wrapping – non-compliant less
than 112 bits of encryption strength
SSL, TLS
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 113 of 120
7 Self-Tests
HPE Networking devices include an array of self-tests that are run during startup and during
operations to prevent any secure data from being released and to insure all components are
functioning correctly.
7.1 Power-On Self-Tests
The following table lists the power-on self-tests implemented by the switches. The switches
perform all power-on self-tests automatically at boot. All power-on self-tests must be passed
before any role can perform services. The power-on self-tests are performed prior to the
initialization of the forwarding function, which prevents the security appliance from passing any
data during a power-on self-test failure.
Table 26 Power-On Self-Tests
Implementation Tests Performed
Security Appliance Software Software/firmware Test (non-Approved RSA 2048 with
SHA-256 which acts as a 256 bit EDC)
DSA signature and verification PWCT
ECDSA signature and verification PWCT
ECDH KAT
Kernel Triple-DES encryption and Triple-DES decryption
KAT
Triple-DES encryption and Triple-DES decryption KAT
RSA signature KAT and verification KAT
RSA signature and verification PWCT
RSA encryption and decryption PWCT
Kernel AES encrypt KAT and AES decrypt KAT
AES encrypt KAT and AES decrypt KAT
Kernel AES-GCM encrypt KAT and AES-GCM decrypt
KAT
AES-GCM encrypt KAT and AES-GCM decrypt KAT
Kernel SHA KATs (SHA-1, SHA-256, SHA-384, and
SHA-512)
SHA KATs (SHA-1, SHA-224, SHA-256, SHA-384, and
SHA-512)
Kernel HMAC KATs (SHA-1, SHA-256, SHA-384, and
SHA-512)
HMAC KATs (SHA-1, SHA-224, SHA-256, SHA-384, and
SHA-512)
Kernel GMAC KAT
SP800-90a CTR_DRBG KATs (Instantiate KAT,
Generate KAT and Reseed KAT)
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 114 of 120
7.2 Conditional Self-Tests
The following table lists the conditional self-tests implemented by the switches. Conditional self-
tests run when a switch generates an ECDSA or RSA key pair and when it generates a random
number.
Table 27 Conditional Self-Tests
Implementation Tests Performed
Security Appliance Software
Pairwise consistency test for RSA
Pairwise consistency test for DSA
Pairwise consistency test for ECDSA
Continuous Random Number Generator Test for the FIPS-
approved SP800-90a CTR_DRBG
SP800-90A Section 11.3 Health Tests for CTR_DRBG
(Instantiate, Generate and Reseed).
Continuous Random Number Generator Test for entropy
source (NDRNG)
Firmware Load Test (RSA PKCS#1 v1.5 2048 bits with
SHA-256)
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 115 of 120
8 Delivery and Operation
8.1 Secure Delivery
To ensure no one has tampered with the goods during delivery, inspect the Networking switch
physical package and check as follows:
1. Outer Package Inspection
1) Check that the outer carton is in good condition.
2) Check the package for a HPE Quality Seal or IPQC Seal, and ensure that it is
intact.
3) Check that the IPQC seal on the plastic bag inside the carton is intact.
4) If any check failed, the goods shall be treated as dead-on-arrival (DOA) goods.
2. Packing List Verification
Check against the packing list for discrepancy in material type and quantity. If any
discrepancy found, the goods shall be treated as DOA goods.
3. External Visual Inspection
Inspect the cabinet or chassis for any defects, loose connections, damages, and
illegible marks. If any surface defect or material shortage found, the goods shall be
treated as DOA goods.
4. Confirm Software/firmware
1) Version verification
To verify the software version, start the appliance, view the self-test result
during startup, and use the display version command to check that the software
version.
 For the 10500, “HPE Comware Software, Version 7.1.045, Release
R7179” indicates it is a FIPS 140-2 and CC certification version.
 For the 12500, “HPE Comware Software, Version 7.1.045, Release
R7377” indicates it is a FIPS 140-2 and CC certification version.
 For the 12900, “HPE Comware Software, Version 7.1.045, Release
R1150” indicates it is a FIPS 140-2 and CC certification version.
If software loading failed or the version information is incorrect, please contact
HPE for support.
2) RSA with SHA-256 verification
To verify that software/firmware has not been tampered, run SHA Hash
command on the appliance. If the hash value is different from release notes of
this software, contact HPE for support. To get release notes, please access
HPE website.
5. DOA (Dead on Arrival)
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 116 of 120
If the package is damaged, any label/seal is incorrect or tampered, stop
unpacking the goods, retain the package, and report to HPE for further
investigation. The damaged goods will be replaced if necessary.
8.2 Secure Operation
The rules for securely operating an HPE Networking switch in FIPS mode are:
1. Install and connect the device according to the installation and configuration guides.
2. Start the device, and enter the configuration interface.
3. Check and configure the clock.
4. By default, the device does not run in FIPS mode. Enable the device to work in FIPS
mode using the fips mode enable command in system view. This will allow the switch
to internally enforce FIPS-compliance behavior, such as run power-up self-test and
conditional self-test.
5. Set up username/password for crypto officer role. The password must comprise no less
than 15 characters and must contain uppercase and lowercase letters, digits, and
special characters.
6. Save the configurations and re-start the device.
The device works in FIPS mode after restarting:
1. Configure the security appliance to use SSHv2.
An operator can determine whether a switch is in FIPS mode with the command display fips
status. When in FIPS mode:
1. The FTP/TFTP server is disabled.
2. The Telnet server is disabled.
3. The web server is disabled.
4. SNMP v1 and SNMP v2c are disabled. Only SNMP v3 is available.
5. The SSH server does not support SSHv1 clients
6. Generated RSA key pairs have a modulus length 2048 bits.
7. Generated ECDSA key pairs with curves P-256, P-384 and P-521.
8. SSHv2, SNMPv3, and IPsec do not support Non-FIPS approved cryptographic algorithms.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 117 of 120
9 Physical Security Mechanism
FIPS 140-2 Security Level 2 Physical Security requirements mandate that a cryptographic
module have an opaque enclosure with tamper-evident seals for doors or removable covers.
HPE Networking devices include both appliance and chassis models. The tamper-evident seals
and opacity shields shall be installed for the module to operate in a FIPS Approved mode of
operation. All Networking devices need tamper-evident seals to meet the Physical Security
requirements.
The Crypto Officer is responsible for properly placing all tamper evident labels on a device and
is responsible for the securing and control of any unused seals and opacity shields. The Crypto
Officer shall clean the module of any grease, dirt, or oil before applying the tamper-evident
labels or opacity shields. The Crypto Officer is also responsible for the direct control and
observation of any changes to the modules such as reconfigurations where the tamper-evident
labels or opacity shields are removed or installed to ensure the security of the module is
maintained during such changes and the module is returned to a FIPS approved state. The
security labels recommended for FIPS 140-2 compliance are provided in the FIPS Kit. These
security labels are very fragile and cannot be removed without clear signs of damage to the
labels.
10500 series
Unit Opacity Kit – Description Opacity kit
– Part Number
HPE 10504 Switch
Chassis
HPE 10504 Switch Chassis Opacity Shield
Kit
JG710A
HPE 10508 Switch
Chassis
HPE 10508 Switch Chassis Opacity Shield
Kit
JG711A
HPE 10508-V Switch
Chassis
HPE 10508-V Switch Chassis Opacity Shield
Kit
JG712A
HPE 10512 Switch
Chassis
HPE 10512 Switch Chassis Opacity Shield
Kit
JG713A
12500 series
Unit Opacity Kit – Description Opacity kit
– Part Number
HPE FlexFabric 12504
AC Switch Chassis
(JC654A)
HPE FlexFabric 12504 AC Switch Chassis
(JC654A)
JG721A
HPE FlexFabric 12508E
AC Switch Chassis
(JG782A)
NA
HPE FlexFabric 12518E
AC Switch Chassis
(JG784A)
NA
12900 series
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 118 of 120
Unit Opacity Kit – Description Opacity kit
– Part Number
HPE FlexFabric 12908E
Switch Chassis (JH255A)
NA
HPE FlexFabric 12910
Switch AC Chassis
(JG619A)
NA
HPE FlexFabric 12916E
Switch Chassis (JH103A)
NA
All units use the same tamper evidence label kits:
Label Kit – Description
Label Kit - Part
Number
HPE 12mm x 60mm Tamper-Evidence (30) Labels JG585A
HPE 12mm x 60mm Tamper-Evidence (100) Labels JG586A
Each modular switch is entirely encased by a thick steel chassis. The HPE 10500, 12500 and
12900 Switches have slots for switching fabric cards. On-board LAN connectors and console
connectors are provided on the MPU board. Power cable connection and a power switch are
provided on the power supplies. The individual modules that comprise the switch may be
removed to allow access to the internal components of each module.
Any chassis slot that is not populated with a module must have a slot cover installed in order to
operate in a FIPS compliant mode. The slot covers are included with each chassis, and
additional slot covers may be ordered from HPE. Use the procedure described in FIPS
enclosure install instruction to apply tamper evident labels to the switch.
The Crypto Officer should inspect the tamper evident labels periodically to verify they are intact
and the serial numbers on the applied tamper evident labels match the records in the security
log. If evidence of tampering is found with the TELs, the module must immediately be powered
down and all administrators must be made aware of a physical security breach in compliance
the local site policies and procedures for dealing with this type of incident.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 119 of 120
10 Mitigation of Other Attacks
The Security appliances do not claim to mitigate any attacks in a FIPS approved mode of
operation.
FIPS 140-2 Non-Proprietary Security Policy for HPE FlexNetwork 10500 and HPE FlexFabric 12500 and 12900 Switch
Series
Page 120 of 120
11 Documentation References
11.1 Obtaining documentation
You can access the HPE Networking products page: http://h17007.www1.hp.com/us/en/ , where
you can obtain the up-to-date documents of HPE Routers and Switches, such as datasheet,
installation manual, configuration guide, command reference, and so on.
11.2 Technical support
For technical or sales related question please refer to the contacts list on the HPE website:
http://www.HP.com.
The actual support website is:
http://www8.hp.com/us/en/support-drivers.html