© 2022 Western Digital Corporation or its affiliates. Public Material - May be reproduced only in its original entirety [without revision].” prior
to release
Ultrastar®
DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive
FIPS 140-2 Cryptographic Module
Non-Proprietary Security Policy
Protection of Data at Rest
Document Version: 1.2
2022-08-26
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 2 of 31
CONTENTS
1. Cryptographic Module Overview.............................................................................................................4
1.1 Models........................................................................................................................................................................5
1.2 Security Level............................................................................................................................................................6
2. FIPS 140 Modes of Operation..................................................................................................................6
2.1 FIPS Approved Mode of Operation.....................................................................................................................6
2.2 TCG Ruby Security Mode ......................................................................................................................................6
2.3 Single User Data Ranges.........................................................................................................................................7
2.4 Approved Algorithms..............................................................................................................................................7
2.5 Approved Random Number Generator...............................................................................................................8
3. Ports and Interfaces....................................................................................................................................9
4. Identification and Authentication Policy.................................................................................................9
4.1 Crypto Officer Roles ...............................................................................................................................................9
4.1.1 Secure ID (SID) .................................................................................................................................................................9
4.1.2 Admin SP Admin1.............................................................................................................................................................9
4.1.3 Locking SP Admins...........................................................................................................................................................9
4.2 User Roles ...............................................................................................................................................................10
4.2.1 Locking SP Users............................................................................................................................................................ 10
4.3 Anybody...................................................................................................................................................................10
4.4 Authentication Method and Strength .................................................................................................................10
5. Access Control Policy ..............................................................................................................................11
5.1 Roles and Authenticated Services........................................................................................................................11
5.2 Unauthenticated Services......................................................................................................................................13
5.3 Critical Security Parameters (CSPs).....................................................................................................................14
5.4 Public Security Parameters....................................................................................................................................17
5.5 SP800-132 Key Derivation Function Affirmations..........................................................................................18
5.6 Critical Security Parameter Modes of Access ....................................................................................................18
5.7 Public Security Parameter Modes of Access......................................................................................................21
6. Operational Environment .......................................................................................................................23
7. Security Rules ............................................................................................................................................23
7.1 Invariant Rules........................................................................................................................................................23
7.2 Initialization Instructions......................................................................................................................................25
7.3 Zeroization Rules...................................................................................................................................................26
8. Physical Security Policy............................................................................................................................26
8.1 Mechanisms.............................................................................................................................................................26
8.2 Operator Responsibility ........................................................................................................................................26
9. Mitigation of Other Attacks Policy ........................................................................................................27
10. Definitions .................................................................................................................................................27
11. Key Words.................................................................................................................................................29
12. Acronyms...................................................................................................................................................29
13. References..................................................................................................................................................30
13.1 NIST Specifications...............................................................................................................................................30
13.2 Trusted Computing Group Specifications.........................................................................................................30
13.3 International Standards .........................................................................................................................................31
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 3 of 31
13.4 Corporate Documents...........................................................................................................................................31
Tables
Table 1 - Ultrastar DC SN840 Models...........................................................................................................5
Table 2 - Module Security Level Specification..............................................................................................6
Table 3 - FIPS Approved Algorithms ............................................................................................................8
Table 4 – Approved Cryptographic Functions Tested with Vendor Affirmation...................................8
Table 5 - Ultrastar DC SN840 Ports and Interfaces.....................................................................................9
Table 6 - Roles and Required Identification and Authentication.............................................................10
Table 7 - Authenticated CM Services ...........................................................................................................12
Table 8 - Unauthenticated CM Services.......................................................................................................13
Table 9 - Critical Security Parameters...........................................................................................................17
Table 10 - Public Security Parameters ..........................................................................................................18
Table 11 - CSP Access Rights within Roles & Services.............................................................................20
Table 12 - CSP Access Rights within Roles & Services.............................................................................21
Table 13 - PSP Access Rights within Roles & Services .............................................................................23
Figures
Figure 1: Ultrastar DC SN840 Cryptographic Module ................................................................................4
Figure 2: Ultrastar DC SN840 Block Diagram..............................................................................................5
Figure 2: Tamper-Evident Seal......................................................................................................................26
Figure 3: Tamper Evidence on Tamper Seal...............................................................................................26
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 4 of 31
1. Cryptographic Module Overview
The self-encrypting Ultrastar® DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive, hereafter referred to as Ultrastar
DC SN840 or Cryptographic Module (CM) is a multiple-chip embedded module that complies with FIPS 140-2 Level
2 security. The drive enclosure defines the cryptographic boundary. See Figure 1: Ultrastar DC SN840 Cryptographic
Module. The physical interface to the Cryptographic Module is the U.21 connector and a 2-pin UART port
connector. All components within this boundary satisfy FIPS 140-2 requirements.
The Cryptographic Module complies with the Trusted Computing Group (TCG) Storage Security Subsystem Class:
Ruby Specification [8]. The TCG Storage specifications [1, 2, 3, 4, 5, 6, 7, and 8] define the logical interface. The
range of supported services, which utilize NIST approved algorithm, include 256-bit AES hardware-based data
encryption, cryptographic erasure of user data, authenticated protection of LBA data ranges and RSA 2048
authenticated firmware download support.
The primary function of the module is to provide encrypted data storage, authenticated access control, and
cryptographic erasure of the data stored on the solid-state media. The Cryptographic Module operator interfaces with
the CM through a host system application.
Figure 1: Ultrastar DC SN840 Cryptographic Module
1
Formally referred to as PCIe SSD SFF-8639
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 5 of 31
Figure 2: Ultrastar DC SN840 Block Diagram
1.1 Models
Multiple hardware versions define the scope of the Cryptographic Module. Storage capacity, write endurance, and
overprovisioning define the differences. Table 1 provides the model numbers, characteristics, and firmware version
associated with each validated model.
Hardware Version Firmware Version Description
WUS4C6416DSP3X5 R2210400, R2210401, R2EF0003 SSD, BICS4, 1.6TB, PCIe, 3DW/D, 28% OP
WUS4BA119DSP3X5 R2210400, R2210401, R2EF0003 SSD, BICS4, 1.92TB, PCIe, 1DW/D, 7% OP
WUS4C6432DSP3X5 R2210400, R2210401, R2EF0003 SSD, BICS4, 3.2TB, PCIe, 3DW/D, 28% OP
WUS4BA138DSP3X5 R2210400, R2210401, R2EF0003 SSD, BICS4, 3.84TB, PCIe, 1DW/D, 7% OP
WUS4C6464DSP3X5 R2210400, R2210401, R2EF0003 SSD, BICS4, 6.4TB, PCIe, 3DW/D, 28% OP
WUS4BA176DSP3X5 R2210400, R2210401, R2EF0003 SSD, BICS4, 7.68TB, PCIe, 1DW/D, 7% OP
WUS4BA1A1DSP3X5 R2210400, R2210401, R2EF0003 SSD, BICS4, 15.36TB, PCIe, 1DW/D, 7% OP
Table 1 - Ultrastar DC SN840 Models
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 6 of 31
1.2 Security Level
The Cryptographic Module meets all requirements applicable to FIPS 140-2 Level 2 Security.
FIPS 140-2 Security
Requirements Section
FIPS 140-2 Security
Level Achieved
Cryptographic Module Specification 2
Module Ports and Interfaces 2
Roles, Services and Authentication 2
Finite State Model 2
Physical Security 2
Operational Environment N/A
Cryptographic Key Management 2
EMI/EMC 3
Self-Tests 2
Design Assurance 2
Mitigation of Other Attacks N/A
Table 2 - Module Security Level Specification
2. FIPS 140 Modes of Operation
2.1 FIPS Approved Mode of Operation
The Cryptographic Module has a single FIPS Approved mode of operation. Upon shipment from the vendor's
manufacturing site the cryptographic module always operates in FIPS Approved Mode. See Section 7.2 for
information on the recommended initialization instructions for the Cryptographic Module. The operator can confirm
that the Cryptographic Module is operating in a FIPS Approved mode by invoking the Level 0 Discovery service and
confirming that the inFIPS data field returns a value of 1.
2.2 TCG Ruby Security Mode
The TCG Ruby security mode utilizes NVMe commands as well as TCG commands that address the TCG Admin SP
and TCG Locking SP to provide services. The Crypto Officer must execute the Activate service to enable the TCG
Ruby security mode.
The TCG Ruby security mode allows multiple users with individualized access control to read, write, and erase data
within independent data areas, which are referred to as LBA ranges. Access control tables define authorities, the
secrets and authentication methods those authorities require, and the access control associations that permit method
operation. Credential tables define the available encryption and decryption algorithms, authentication mechanisms,
and store associated secrets or keys. Access control defines which authorities are permitted to successfully invoke
which methods and modify ACLs.
The TCG Ruby security mode supports administrator functions within the Crypto Officer role to,
• Enable and disable Users
• Grant LBA range access to Users
• Create, configure, lock, and unlock LBA ranges
• Cryptographically erase data ranges
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 7 of 31
2.3 Single User Data Ranges
The Crypto Officer my elect to define one or more data ranges as a Single User Data Range (SUDR) when invoking
the Activate service. The TCG Storage Opal SSC Feature Set: Single User Mode [5] defines Single User Data Ranges.
As specified, the associated User role solely manages its assigned SUDR. Executing the Reactivate service allows an
enabled Locking SP Admin to reclassify user data ranges.
2.4 Approved Algorithms
The Cryptographic Module supports the following FIPS Approved algorithms. All algorithms and key lengths
comply with NIST SP 800-131A.
CAVP Cert Algorithm Standards and Function
A1025
[SP 800-90A, SP 800-38A, SP 800-38D] DRBG
Function: Deterministic random number generator (DRBG).
Mode: CTR DRBG with AES-256 Derivation Function
Key Size: 256 bits
Key Length: 384 bits
Security Strength: 256 bits
Prerequisite: AES 3580
A1025
[ SP 800-132] PBKDF2
Function: PBKDF2 utilizes a 32-byte PIN (password) and 256-bit KDF Salt to generate 256-bit
Derived Authority Keys.
Mode: HMAC-SHA2-256
Password Size: 32 bytes
Salt Size: 256 bits
Security Strength: 256 bits
Prerequisite: SHS 2942, HMAC 2280
A1025, A1184
[FIPS 186-4] RSA
Function: Digital signature verification with SHA2-256
Mode: PKCS#1 v1.5
Key Size: 2048 bits
Security Strength: 112 bits
Prerequisite: SHS 2942
A1025
[SP 800 38F] Key Wrapping
Functions: Encryption, decryption, and key wrapping to protect the Root Signing Key
Modes: KWP-AE, KWP-AD using AES-ECB-256
Key Size: 256 bits
Security Strength: 256 bits
Prerequisite: AES 3913
AES 35802
[FIPS 197, SP 800-38A, SP 800-38E] AES
Function: AES-CBC-256 encrypts and decrypts CSPs and PSPs.
Mode: CBC
Key Size: 256
Security Strength: 256 bits
AES 39133
[FIPS 197] AES
Function: AES-ECB-256 encryption and decryption. Supports SP 800-38F key wrapping
Mode: ECB
Key Size: 256
Security Strength: 256 bits
2
The cryptographic module does not use the AES ECB-128, AES ECB-256, AES-CBC-128, AES-XTS-128, and AES-XTS-256 capabilities
listed under Cert# AES 3580.
3
The cryptographic module does not use the AES-ECB-128, AES-XTS-128 and AES-XTS-256 capabilities listed under Cert# AES 3913.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 8 of 31
CAVP Cert Algorithm Standards and Function
C1973
[FIPS 197, SP 800-38A, SP 800-38E] AES4
Function: Used to encrypt and decrypt data-at-rest in a storage application
Mode: XTS5
• Per IG A.9, an LRK.AESKey/LRK.XTS keyset differs from its associated
NSK.AESKey/NSK.XTS keyset
Key Size: 256
Security Strength: 256 bits
ENT (P)
[SP800-90B]
Function: Hardware entropy noise source seeds the Approved [SP800-90A] DRBG
Type: Ring Oscillator
DRBG Seed Length: 5120 bits
DRBG Seed Entropy: 431.295 bits (2.6956 bits per 32 bits)
HMAC 22806
[FIPS 198-1] HMAC
Function: Used to sign and verify CSPs and PSPs and derive keys in PBKDF2.
Mode: SHA2-256
Key Size: 256
Security Strength: 256 bits
Prerequisite: SHS 2942
SHS 29427
[FIPS 180-4] SHS
Functions: Digital signature verification and in used in the HMAC function
Mode: SHA2-256
Key Size: 256
Security Strength: 256 bits
Table 3 - FIPS Approved Algorithms
Algorithm Description Rationale
CKG
[SP800 133] Cryptographic Key Generation
Function: Generated from the DRBG without further
modification or post processing
Reference: Table 9 and Table 10 list the Symmetric Keys
Vendor Affirmed
[FIPS140] IG D.12
[SP 800 133] Sections 6.1, 6.2.3 and 6.3
Table 4 – Approved Cryptographic Functions Tested with Vendor Affirmation
2.5 Approved Random Number Generator
A validated [SP 800-90B] ENT (P) seeds the Approved [SP800-90A] DRBG. Available entropy does not modify the
security strength of the cryptographic keys generated by the module. Each 32-bit sample block contains at least
2.6956 bits of entropy. Each time the DRBG is instantiated or reseeded, one hundred sixty (160) 32-bit samples seed
the DRBG. This equates to 5120 bits of entropy data and translates to at least 431.295 bits of entropy. The nonce
consumes approximately 143.7 bits. Therefore, approximately 287.5 bits of entropy remain to determine the bit
strength of the keys generated by the DRBG. This exceeds the 384 bits (256-bit entropy input and 128-bit nonce) of
min-entropy needed to seed the DRBG with 256-bits of security.
4 AES-ECB-128 and AES-XTS-128 were tested. However, the cryptographic module does not use these algorithms.
5 The length of the XTS-AES data unit does not exceed 220 blocks
6 The cryptographic module does not use the HMAC-SHA1, and HMAC-SHA2-224 capabilities listed under Cert# HMAC 2280.
7 The cryptographic module does not use the SHA-1 and SHA2-224 capabilities listed under Cert# SHS 2942.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 9 of 31
3. Ports and Interfaces
The drive uses the standard 68-pin PCIe U.2 connector that conforms to the mechanical requirements of SFF-8639.
Table 5 identifies the Cryptographic Module’s ports and interfaces. The UART port is a three-wire port that consists
of transmit (Tx), receive (Rx) and ground. The UART connector is protected by the application of a tamper evident
seal. The Cryptographic Module does not provide a removable maintenance access panel.
FIPS 140-2 Interface Cryptographic Module Port Connector Pins
Power Power connector
Control Input U.2 connector, UART connector
Status Output U.2 connector, UART connector
Data Input U.2 connector, UART connector
Data Output U.2 connector, UART connector
Table 5 - Ultrastar DC SN840 Ports and Interfaces
4. Identification and Authentication Policy
The Cryptographic Module enforces role separation by requiring a role identifier and an authentication credential in
the form of a Personal Identification Number (PIN). The Cryptographic Module enforces the following FIPS140-2
operator roles. Table 6 maps TCG Storage authorities to FIPS 140-2 roles.
4.1 Crypto Officer Roles
4.1.1 Secure ID (SID)
This Crypto Officer role corresponds to the authority that represents the TPer owner within the Admin SP as defined
in the TCG Storage Security Subsystem Class: Opal [2] specification. The Crypto Officer uses this role to transition
the Cryptographic Module to the TCG Storage Ruby security mode. The Cryptographic Mode actively rejects
firmware images that do not comply with FIPS 140 security requirements.
4.1.2 Admin SP Admin1
This Crypto Officer role corresponds to the Admin SP Admin1 authority defined in the TCG Storage Security
Subsystem Class: Opal [2] specification. The Admin SP Admin1 authority can enable and disable Locking SP
Admins.
4.1.3 Locking SP Admins
This Crypto Officer role corresponds to the Locking SP Admin Authority as defined in the TCG Storage Security
Subsystem Class: Opal [2] specification. The CM enables Locking SP Admin1 by default. The CM can enable at most
four (4) separate Locking SP Admins. By default, the CM disables Locking SP Admins beyond Admin1. When the
Single User Data Range (SUDR) feature is disabled, a Locking SP Admin can enable and disable Users, create, and
delete data ranges, set data range attributes, lock, unlock, and erase data ranges. A Locking SP Admin executes the
Erase service to cryptographically erase a SUDR, by invoking TCG Erase. A Locking SP Admin executes the Erase
service to cryptographically erase a non-SUDR, by invoking TCG GenKey. Both methods accomplish the same end
by regenerating and replacing the Media Encryption Key (MEK) assigned to the data range.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 10 of 31
4.2 User Roles
4.2.1 Locking SP Users
This user role corresponds to the Locking SP User Authority as defined in the TCG Storage Security Subsystem Class:
Opal [2] specification. This role can lock and unlock LBA ranges to control the ability of the host to read and write
data to and from the CM. By default, all Locking SP Users are disabled. The CM can enable at most nine (9) separate
Users. Enabled Locking SP Admins enable Locking SP Users and assign them read/write/erase access to LBA data
ranges. A Locking SP User executes the Erase service to cryptographically erase a SUDR by invoking TCG Erase or
TCG GenKey. A Locking SP User executes the Erase service to cryptographically erase a non-SUDR by invoking
TCG GenKey. Both methods accomplish the same end by regenerating and replacing the Media Encryption Key
(MEK) assigned to the data range.
4.3 Anybody
The Anybody role can access services that do not require authentication. Apart from the Generate Random service,
which provides output from an instance of the SP800-90A DRBG, unauthenticated services do not disclose, modify,
or substitute Critical Security Parameters, use Approved security functions, or otherwise affect the security of the
Cryptographic Module. If the operator has physical access to the drive, the Anybody role can use a power cycle to
reset the Cryptographic Module, which results in the execution all the Power on Self-Tests (POST).
TCG Authority Description
Authentication
Type
Authentication Data
SID
The TCG Storage Security Subsystem
Class: Opal [2] specification defines the
SID authority.
Role-based SID PIN
Admin SP Admin1
The TCG Storage Security Subsystem
Class: Opal [2] specification defines the
Admin SP Admin1 authority.
Role-based Admin SP Admin1 PIN
Locking SP Admin
The TCG Storage Security Subsystem
Class: Opal [2] specification] defines
Locking SP Admin authority.
Role-based Locking SP Admin PIN
Locking SP User
The TCG Storage Security Subsystem
Class: Opal [2] specification defines the
Locking SP User authority.
Role-based Locking SP User PIN
Anybody
Anybody is a role that does not require
authentication. The TCG Storage Security
Subsystem Class: Opal [2] specification
defines the Anybody authority.
Unauthenticated N/A
Table 6 - Roles and Required Identification and Authentication
4.4 Authentication Method and Strength
Authentication occurs within a TCG session. At any one time, only a single session can be open. After opening an
Admin SP session or a Locking SP session, an operator uses the Authenticate method to authenticate to a role.
Authentications persist until the session closes or the Cryptographic Module powers down.
Operators utilize an Authority PIN to authenticate to a Crypto Officer or User role. Authority PINs are 32-byte TCG
credentials. For a 32-byte PIN, there are 2256 possible values. Values from 0x00 to 0xFF are allowed for each byte
position. Assuming all possible values have an equal chance of use, the probability of guessing the correct PIN is one
chance in 2256 or approximately 8.64 x 10-78, which is significantly less than 1/1,000,000.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 11 of 31
The TCG Storage Ruby security model includes a TryLimit attribute for each TCG Authority, which if reached, locks
out further attempts to authenticate to the TCG Authority. Assuming the TryLimit is non-zero8, an
Authority_Locked_Out state exists if the Tries count value equals the TryLimit value associated with a TCG
Authority. Each authentication attempt consumes approximately 198 microseconds. Hence, at most, approximately
30,287 authentication attempts can occur within one minute when the TryLimit equals zero (0). Thus, the probability
that a false acceptance occurs within a one-minute interval is approximately 2.62 x 10-73 (8.64 x 10-78 x 30,287), which
is significantly less than 1/100,000.
5. Access Control Policy
5.1 Roles and Authenticated Services
Service Description Role(s)
Activate
The Activate method allows the TPer owner to
“turn on” a Security Provider (SP) that was
created in manufacturing. LBA ranges are
configured, and data encryption and access
control credentials (re)generated and/or set
within the Cryptographic Module. Access
control is configured for LBA range unlocking.
CO (SID, Admin SP Admin1)
Authenticate Input a TCG Credential for authentication
CO (SID, Admin SP Admin1,
Locking SP Admins)
Users (Locking SP Users)
Disable User Set PIN
This service disables the ability of a non-SUDR
User to modify its own PIN.
CO (Locking SP Admins)
Enable/Disable Admin SP
Admin
This service enables and disables the Admin SP
Admin1 authority.
CO (SID)
Enable/Disable Locking SP
Admin
This service enables and disables a Locking SP
Admin authority.
CO (Locking SP Admin1)
Enable/Disable Locking SP
User
This service enables and disables a Locking SP
User authority.
CO (Locking SP Admins)
Enable/Disable SUDR
This service enables and disables the
classification of a data range as a SUDR.
CO (Locking SP Admins)
Erase non-SUDR
A cryptographic erasure service that utilizes the
TCG GenKey method to generate and replace
the MEK assigned to an LBA data range
CO (Locking SP Admins)
Users (Locking SP Users)
Erase SUDR
A cryptographic erasure service that utilizes the
TCG GenKey or TCG Erase method to generate
and replace the MEK assigned to an LBA data
range
CO (Locking SP Admins)9
Users (Locking SP Users)10
Field FA
This service provides basic drive health analysis
testing and media verification. The service does
not leak any clear text user data to the host
interface. This service is limited to performing
the following functions:
• Basic health tests
• Media verification
All Host Read/Write Commands are inhibited.
CO (SID, Admin SP Admin1,
Locking SP Admins)
Users (Locking SP Users)
8 When TryLimit is set to zero (0), the CM places no limit on the number of authentication attempts.
9 TCG Erase
10 TCG GenKey or TCG Erase
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 12 of 31
Service Description Role(s)
Initialize Cryptographic
Module11
Crypto Officer provisions the Cryptographic
Module from the organizational policies
CO (SID, Admin SP Admin1)
Lock/Unlock Data Range
This service denies or permits read and write
access to an LBA range
CO (Locking SP Admins)12
Users (Locking SP Users)
Reactivate
In Single User Mode, the reactivate service
allows the host to define which ranges are under
the control of a single User authority. In
addition, it allows the host to define range
ownership within non-Global Range Locking
objects.
CO (Locking SP Admins)
SecureDrive Command
TCG IF-SEND and IF-RECV transport secure
commands to and from the Cryptographic
Module.
CO (SID, Admin SP Admin1,
Locking SP Admins)
Users (Locking SP Users)
Set
Write data structures; access control enforcement
occurs per data structure field. This service can
change PINs.
CO (SID, Admin SP Admin1,
Locking SP Admins)
Users (Locking SP Users)
Set Data Range Attributes
for a non-SUDR
This service sets the starting location, size, and
locking attributes for a SUDR.
CO (Locking SP Admins)
Users (Locking SP Users)
Set Data Range Attributes
for a SUDR
This service sets the starting location, size, and
locking attributes as well as the User access rights
for a non-SUDR.
CO (Locking SP Admins) Users
(Locking SP Users)
Zeroize
This service utilizes the TCG Revert method to
zeroize the CM and return the CM to its original
manufactured state. Execution of this service
requires the operator to authenticate to the
PSID13 or SID PIN.
SID use case:
CO (SID)
PSID use case:
CO (Admin SP Admin1,
Locking SP Admins)
Users (Locking SP Users)
Anybody
Table 7 - Authenticated CM Services
11 See the Cryptographic Module Acceptance and Provisioning section within 7.2 Initialization Rules.
12 Applies only to non-SUDRs
13 See TCG Storage Opal SSC Feature Set: PSID [3]
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 13 of 31
5.2 Unauthenticated Services
Table 8 - Unauthenticated Services lists the unauthenticated services the Cryptographic Module provides.
Service Description
End Session End a TCG session by clearing all session state
FIPS 140 Compliance
Descriptor14
This service reports the FIPS 140 revision as well as the Cryptographic Module’s overall
security level, hardware revision, firmware revision and module name.
Firmware Download RSA2048 PKCS#1 v1.5 and SHA-256 verify the entire firmware image.
Format NVM
This service changes an LBA data size and/or metadata size. This low-level format
operation may cryptographically erase all data and metadata associated with all
namespaces or specific namespaces.
Generate Random TCG Random method generates a random number from the SP800-90A DRBG
Get Reads data structure; access control enforcement occurs per data structure field
Get Data Store15 Read a stream of bytes from unstructured storage
Level 0 Discovery TCG ‘Level 0 Discovery’ method outputs the FIPS mode of the Cryptographic Module
NVMe Admin Commands The NVMe admin commands are defined in the NVM Express v1.3.c [10] and NVM
Express™ Management Interface [11] specifications
NVMe I/O Commands The NVMe admin commands are defined in the NVM Express v1.3.c [10] and NVM
Express™ Management Interface [11] specifications
Read Data
This service decrypts user data when reading the data from a data range. The data range
must be unlocked to enable reads from the data range.
Reset Module Power on Reset
SecureDrive Command
TCG IF-SEND and IF-RECV transport secure commands to and from the
Cryptographic Module.
Security Receive
The Security Receive command transfers the status and data result of one or more
Security Send commands that were previously submitted to the controller.
Security Send The Security Send command is used to transfer security protocol data to the controller.
Self-Test The Cryptographic Module performs self-tests when it powers up
Set Data Store16 Write a stream of bytes to unstructured storage.
SoC Rebuild
The SoC Rebuild service utilizes the SecureDrive Command service to zeroize and
regenerate the Root Keyset and the Global Active Keyset
Start Session Start TCG session
Status Output TCG (IF-RECV) protocol
Write Data
This service encrypts user data when writing the data from a data range. The data range
must be unlocked to enable writes to the data range.
Table 8 - Unauthenticated CM Services
14 See §5.1.5.3 FIPS 140 Compliance Descriptor section within the Security Features for SCSI Commands [14].
15 The access control for the retrieval of data in the DataStore initially requires Admin SP Admin1 or an Locking SP Admin to enable access
16 The access control for the modification of data in the DataStore initially requires the Admin SP Admin1 or an Locking SP Admin to enable
access.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 14 of 31
5.3 Critical Security Parameters (CSPs)
The Cryptographic Module contains the CSPs listed in Table 9. Zeroization of CSPs complies with the purge
requirements for SCSI Hard Disk drives within [SP800-88], Guidelines for Media Sanitization.
Name Type Description
ENT (P) 5120-bit Entropy output Entropy source for DRBG
DRBG.Seed 256-byte Entropy input Internal state associated with the [SP800-90A]
CTR_DRBG using AES-256
Sourced from ENT (P)
DRBG.Key 256-bit value Internal state associated with the [SP800-90A]
CTR_DRBG using AES-256
DRBG.V 128-bit value Internal state associated with the [SP800-90A]
CTR_DRBG using AES-256.
Authority Digest 256-bit digest An HMAC-SHA2-256 digest of an Authority PIN
and its associated SED Admin SP key or SED
Locking SP key.
Authority PIN 32-byte value Values from 0x00 to 0xFF are allowed for each
byte position. A PBKDF2 algorithm uses an
Authority PIN to authenticate to the credential of a
TCG Authority.
SID PIN Authority PIN A 32-byte data value used to authenticate to the
TCG credentials of the SID Authority.
Admin SP Admin1 PIN Authority PIN A 32-byte data value used to authenticate to the
TCG credentials of the Admin SP Admin1
Authority.
Locking SP Admin PIN
(Maximum of 4)
Authority PIN A 32-byte data value used to authenticate to the
TCG credential of each Locking SP Admin
Authority.
Locking SP User PIN
(Maximum of 9)
Authority PIN A 32-byte data value used to authenticate to the
TCG credential of each Locking SP User
Authority.
Root Encryption Key 256-bit keys The CM utilizes AES-CBC-256 and the Root
Encryption Key to encrypt and decrypt the Global
Active Keyset. The [SP 800-38F] KWP algorithm
uses the Root Encryption Key to wrap and unwrap
the Root Signing Key.
The Cryptographic Module’s DRBG generates this
key without modification. The CM stores this key
in OTP memory.
Root Signing Key 256-bit key An HMAC-SHA2-256 digest of the concatenated
Root Signing Key and encrypted Global Active
Keyset signs the Global Active Keyset.
The Cryptographic Module’s DRBG generates this
key without modification. The CM stores the Key
Wrapped value within the Reserved Area of NOR
flash.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 15 of 31
Name Type Description
Global Active Keyset (AEK) Set of 256-bit keys:
Global Active Key,
Global Active Signing Key
The CM utilizes AES-CBC-256 and the Global
Active Key to encrypt and decrypt the SED Active
Keyset, UAKa and Namespace Keys.
An HMAC-SHA2-256 digest of the Global Active
Signing Key and the SED Active Keyset signs the
SED Active Keyset.
An HMAC-SHA2-256 digest of the Global Active
Signing Key and the UAKa signs the UAKa.
An HMAC-SHA2-256 digest of the Global Active
Signing Key and a Namespace Key, signs a
Namespace Key.
The Cryptographic Module’s DRBG generates
these keys without modification. The CM stores
the encrypted keyset within the Reserved Area of
NOR flash.
SED Active Keyset Set of 256-bit keys:
SED Active Key
SED Active Signing Key
The CM utilizes AES-CBC-256 and the SED
Active Key to encrypt and decrypt the SED Admin
SP Keyset and the SED Locking SP Keyset.
An HMAC-SHA2-256 digest of the SED Active
Signing Key and the SED Admin SP Keyset signs
the SED Admin SP Keyset.
An HMAC-SHA2-256 digest of the SED Active
Signing Key and the SED Locking SP Keyset signs
the SED Locking SP Keyset.
The Cryptographic Module’s DRBG generates
these keys without modification. The CM stores
the encrypted keyset within the Reserved Area of
NOR flash.
SED Admin SP Keyset Set of 256-bit keys:
SED Admin SP Key
SED Admin SP Signing Key
The CM utilizes AES-CBC-256 and the SED
Admin SP Key to encrypt and decrypt TCG table
data associated with an Admin SP.
An HMAC-SHA2-256 digest of the SED Admin
SP Signing Key and the entire contents of an
Admin SP table, signs the associated table.
The Cryptographic Module’s DRBG generates
these keys without modification. The CM stores
the encrypted keyset within the Reserved Area of
NOR flash.
SED Locking SP Keyset Set of 256-bit keys:
SED Locking SP Key
SED Locking SP Signing
Key
The CM utilizes AES-CBC-256 and the SED
Locking SP Key to encrypt and decrypt table data
associated with a Locking SP authority.
An HMAC-SHA2-256 digest of the SED Locking
SP Signing Key and the entire contents of a
Locking SP table signs the associated table.
The Cryptographic Module’s DRBG generates
these keys without modification. The CM stores
the encrypted keyset within the Reserved Area of
NOR flash.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 16 of 31
Name Type Description
SED Volatile Keyset Set of 256-bit keys:
SED Volatile Key
SED Volatile Signing Key
The CM utilizes AES-CBC-256 and the SED
Volatile Key to encrypt and decrypt keys stored in
IRAM.
An HMAC-SHA2-256 digest of the SED Volatile
Signing Key and the encrypted key stored in
IRAM, signs the encrypted key.
The Cryptographic Module’s DRBG generates
these keys without modification. The CM stores
the keyset in IRAM.
Admin Authority Key (Ka)
(Maximum of 5)
256-bit key The CM utilizes AES-CBC-256 and a PBKDF2
derived Ka key to encrypt and decrypt UAK0 and
the UMK. The Cryptographic Module derives a
unique Ka for Admin SP Admin1 and each enabled
Locking SP Admin. Ka keys are destroyed after
use.
Non-Admin Authority Key (Ku)
(Maximum of 9)
256-bit key The CM utilizes AES-CBC-256 and a PBKDF2
derived Ku keys to encrypt and decrypt an
associated UAK. The Cryptographic Module
derives a unique Ku for each enabled Locking SP
User. Ku keys are destroyed after use.
User Access Key (UAK)
(Maximum of 9)
256-bit key The CM utilizes AES-CBC-256 and a UAK to
encrypt and decrypt an associated RAK. The
Cryptographic Module generates a unique UAK for
each enabled Locking SP User. The Cryptographic
Module’s DRBG generates these keys without
modification. The CM stores each encrypted key
within the Reserved Area of NAND flash.
Admin User Access Key (UAK0) 256-bit key The CM utilizes AES-CBC-256 and UAK0 key to
encrypt and decrypt RAKs. All Locking SP
Admins share UAK0. The Cryptographic Module’s
DRBG generates this key without modification.
The CM stores its encrypted value within the
Reserved Area of NAND flash.
Anybody User Access Key (UAKa) 256-bit key The CM utilizes AES-CBC-256 and UAKa to
encrypt and decrypt RAKs. The Cryptographic
Module’s DRBG generates this key without
modification. The CM stores its encrypted value
within the Reserved Area of NAND flash.
User Management Key (UMK) 256-bit key The CM utilizes AES-CBC-256 and the UMK to
encrypt and decrypt UAKs. All enabled Locking
SP Admins and Admin SP Admin1 share the
UMK. The Cryptographic Module’s DRBG
generates this key without modification. The CM
stores its encrypted value within the Reserved Area
of NAND flash.
Range Access Key (RAK)
(16 total – 1 per LBA range)
256-bit key The CM utilizes AES-CBC-256 and an RAK to
encrypt and decrypt associated LRKs. The
Cryptographic Module’s DRBG generates these
keys without modification. The CM stores their
encrypted value within the Reserved Area of
NAND flash.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 17 of 31
Name Type Description
Locking Range Key (LRK)
(16 total - 1 per LBA range)
Set of 256-bit keys:
AES Key, XTS Key
An LRK in combination with its associated NSK
creates an MEK. The Cryptographic Module’s
DRBG generates each LRK.AES Key and
LRK.XTS Key without modification. The CM
stores their encrypted value within the Reserved
Area of NAND flash.
Namespace Key (NSK)
(16 total - 1 per LBA range)
Set of 256-bit keys:
AES Key, XTS Key
An NSK in combination with its associated LRK
creates an MEK. The Cryptographic Module’s
DRBG generates each NSK.AES Key and
NSK.XTS Key without modification. The CM
stores their encrypted value within the Reserved
Area of NAND flash.
MEK - Media Encryption Keyset
(16 total - 1 per LBA range)
Derived set of 256-bit keys:
AES Encryption Key,
AES Decryption Key
XTS Tweak Key
The MEK encrypts and decrypts LBA ranges. The
MEK.AESEnc Key is an XOR of an LRK.AES
Key and an NSK.AES Key.
The MEK.XTS.Tweak Key is an XOR of an
LRK.XTS Key and an NSK.XTS Key. The CM
stores each encrypted MEK in IRAM.
Table 9 - Critical Security Parameters
5.4 Public Security Parameters
The Cryptographic Module utilizes RSA public key cryptography to verify that firmware downloaded to the module is
authentic and to verify specific steps in the secure boot process. The Cryptographic Module uses RSA 2048 PKCS#1
v1.5 to verify each signature within the asymmetric key tree to establish a chain of trust. The RSA Public/Private key
pairs used in this process are generated and stored within a Western Digital controlled Hardware Security Module
(HSM). The SD_CA Key, SD_BFW Key, SD_SM Key, PROD GROUP Key, OEM FW Key, and OEM_OFS Key
public keys are injected during the manufacturing process and stored within the Reserved Area of NOR flash
memory. The Cryptographic Module rejects downloaded firmware image if the digital signature verification process
fails.
Key Name Type Description
PSID17 32-character
alphanumeric string
The PSID is derived from a 32-byte value generated by the
Cryptographic Module’s DRBG, without modification. An
Alphanumeric Character Conversion process derives the
alphanumeric string from the 32-byte value. The value is
displayed on the module’s product label. The PSID provides
authentication data and proof of physical presence for the
Zeroize service.
MSID18 32-character
alphanumeric string
The MSID derives from a 32-byte value generated by the
Cryptographic Module’s DRBG. An Alphanumeric Character
Conversion process derives the alphanumeric string from the
32-byte value.
KDF Salt 256-bit key
The PBKDF2 implementation, using HMAC-SHA2-256,
utilizes unique KDF Salts to derive each Ka and Ku key. The
Cryptographic Module’s DRBG generates KDF Salts without
modification.
17 The SED Active Key encrypts the PSID. An HMAC-SHA2-256 digest of the PSID is store in the Reserved Area. The TCG Revert method
regenerates the digest.
18 An HMAC-SHA2-256 digest of the MSID is store in the Reserved Area. The TCG Revert method regenerates the digest.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 18 of 31
Key Name Type Description
Storage Device Certification
Authority Key (SD_CA Key)
RSA 2048 PKCS#1
v1.5 public key
The SD_CA Key is the Master RSA Public Key used to verify
the Secure Loader image.
Storage Device Boot FW Key
(SD_BFW Key)
RSA 2048 PKCS#1
v1.5 public key
The SD_BFW Key is public key used to verify all boot flash
images.
Storage Device Secure
Message Key (SD_SM Key)
RSA 2048 PKCS#1
v1.5 public key
The SD_SM Key verifies secure messages used for
manufacturing, development, and failure analysis
Product Group Key (PROD
GROUP Key)
RSA 2048 PKCS#1
v1.5 public key
The PROD GROUP Key verifies an OEM’s Key certificates.
OEM Firmware Key (OEM
FW Key)
RSA 2048 PKCS#1
v1.5 public key
The OEM FW Key verifies OEM firmware images and
packages.
OEM Original Factory State
Key (OEM_OFS Key)
RSA 2048 PKCS#1
v1.5 public key
The OEM_OFS Key verifies the OEM Original Factory
Settings files.
Table 10 - Public Security Parameters
5.5 SP800-132 Key Derivation Function Affirmations
• The Cryptographic Module utilizes an HMAC-SHA2-256 based [SP800 132] Password Based Key Derivation
Function (PBKDF2) that complies with Option 2a of SP800-132.
• Security Policy rules set the minimum Authority PIN length at 32-bytes. The Cryptographic Module allows
values from 0x00 to 0xFF for each byte of the Authority PIN.
• The upper bound for the probability of guessing an Authority PIN is 2-256. The difficulty of guessing the
Authority PIN is equivalent to a brute force attack.
• Derived Authority Keys, Ka, and Ku ([SP800 132] Master Keys) are derive by processing a 32-byte Authority
PIN ([SP800 132] Password) and a 256-bit KDF Salt though an PBKDF2 algorithm [SP800 132], using HMAC-
SHA2-256. Each KDF Salt associated with a Ka or Ku key is unique. Therefore, each Ka and Ku key is unique.
Each Ka and Ku has a security strength of 256 bits.
• Each 256-bit KDF Salt is a random number generated using the [SP800 90A] DRBG.
5.6 Critical Security Parameter Modes of Access
Table 11 and Table 12 define the relationship between access to Critical Security Parameters (CSPs) and the listed
Cryptographic Module services. The definitions shown below define the access modes listed in both tables.
• G = Generate: The Cryptographic Module generates a CSP from the [SP800-90A] DRBG, derives a CSP with
the PBKDF2 Key Derivation Function or generates an HMAC-SHA2-256 hash to sign a CSP.
• I = Input: The Cryptographic Module imports a CSP from outside the cryptographic boundary.
• O = Output: The Cryptographic Module does not support the output of CSPs outside the cryptographic
boundary.
• E = Execute: The module executes a service that uses the CSP.
• S = Store: The Cryptographic Module stores a CSP persistently on media within the Cryptographic Module.
• Z = Zeroize: The Cryptographic Module zeroizes a CSP that is stored in volatile or non-volatile memory.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 19 of 31
Service
Authority
Digest
SID
PIN
Admin
SP
Admin1
PIN
Locking
SP
Admin
PINs
Locking
SP
User
PINs
DRBG.Seed
DRBG.Key
DRBG.V
ENT
(P)
MEK
K
a
K
u
LRK
Activate GS Z E GE GE GS GS GS GS
Authenticate E IE IE IE E E
Disable User Set PIN
Enable/Disable Admin SP
Admin
Enable/Disable Locking
SP Admin or User (non-
SUDR)
Enable/Disable SUDR
Erase non-SUDR GSZ GSZ
Erase SUDR GSZ GSZ
End Session
Field FA
FIPS 140 Compliance
Descriptor
Firmware Download
Format NVM19 GSZ E
Generate Random E GE GE
Get
Get Data Store E E E
Initialize Cryptographic
Module
GS IE IE IE GE GE GE GE GS GS GS GS
Level 0 Discovery
Lock/Unlock Data Range
NVMe Admin Commands
NVMe I/O Commands
Reactivate GS Z E GE GE GS
Read Data E E
Reset Module GEZ GEZ GEZ GE S S
SecureDrive Command
Security Receive
Security Send
Self-Test (KATs)
19 19 If a range is write locked the execution of Format NVM is blocked.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 20 of 31
Service
Authority
Digest
SID
PIN
Admin
SP
Admin1
PIN
Locking
SP
Admin
PINs
Locking
SP
User
PINs
DRBG.Seed
DRBG.Key
DRBG.V
ENT
(P)
MEK
K
a
K
u
LRK
Set I I I
Set Data Range Attributes
for a non-SUDR
Set Data Range Attributes
for a SUDR
Set Data Store E E
SoC Rebuild
Start Session
Status Output
Write Data E E
Zeroize GZ Z Z Z GE GE GE GSZ Z Z GSZ
Table 11 - CSP Access Rights within Roles & Services
Service
RAK
UAK
UAK
0
UAKa
UMK
NSK
Root
Keyset
Global
Active
Keyset
(AEK)
SED
Active
Keyset
SED
Admin
SP
Keyset
SED
Locking
SP
Keyset
SED
Volatile
Keyset
Activate GS GS GS GS GS GS E E E GE
Authenticate
Disable User Set PIN
Enable/Disable Admin SP
Admin
Enable/Disable Locking SP
Admin or User (non-SUDR)
Enable/Disable SUDR
Erase non-SUDR E E GSZ
Erase SUDR E E GSZ
End Session
Field FA
FIPS 140 Compliance
Descriptor
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 21 of 31
Service
RAK
UAK
UAK
0
UAKa
UMK
NSK
Root
Keyset
Global
Active
Keyset
(AEK)
SED
Active
Keyset
SED
Admin
SP
Keyset
SED
Locking
SP
Keyset
SED
Volatile
Keyset
Firmware Download
Format NVM EGSZ E
Generate Random
Get
Get Data Store E E E E E E E E E E E E
Initialize Cryptographic
Module
EGS GS GS GS GS GS
Level 0 Discovery
Lock/Unlock Data Range
NVMe Admin Commands
NVMe I/O Commands
Reactivate GS GS E E E GE
Read Data E E E E E E E E E E E E
Reset Module S S S S S G
SecureDrive Command
Self-Test (KATs)
Security Receive
Security Send
Set
Set Data Range Attributes
for a non-SUDR
Set Data Range Attributes
for a SUDR
Set Data Store E E E E E E E E E E E E
SoC Rebuild GSZ GSZ
Start Session
Status Output
Write Data E E E E E E E E E E E E
Zeroize EGSZ GSZ GSZ GSZ GSZ GSZ GSZ GSZ GSZ GZ
Table 12 - CSP Access Rights within Roles & Services
5.7 Public Security Parameter Modes of Access
Table 13 defines the relationship between access to Public Security Parameters (PSP) and the listed Cryptographic
Module services. The definitions shown below define the access modes listed in Table 13.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 22 of 31
• G = Generate: The Cryptographic Module generates a PSP from the [SP800-90A] DRBG, derives a PSP with
the Key Derivation Function or hashes authentication data with SHA-256 or HMAC-SHA-256.
• I = Input: The Cryptographic Module imports a PSP from outside the cryptographic boundary.
• O = Output: The Cryptographic module outputs the value of selective PSPs.
• E = Execute: The module executes a service that uses the PSP.
• S = Store: The Cryptographic Module stores a PSP persistently on media within the Cryptographic Module.
• Z = Zeroize: The Cryptographic Module zeroizes a PSP that is stored in volatile or non-volatile memory.
Service
MSID
PSID
KDF
Salt
SD_CA
Key
SD_BFW
Key
SD_SM
Key
PROD_GROUP
Key
OEM_FW
Key
OEM_OFS
Key
Activate EGS
Authenticate E E
Disable User Set PIN
Enable/Disable Admin SP Admin
Enable/Disable Locking SP Admin or User (non-SUDR)
Enable/Disable SUDR
Erase non-SUDR
Erase SUDR
End Session
Field FA E
FIPS 140 Compliance Descriptor
Firmware Download IS IS
Format NVM
Generate Random
Get
Get Data Store
Initialize Cryptographic Module OE GS
Level 0 Discovery
Lock/Unlock Data Range
NVMe Admin Commands
NVMe I/O Commands
Reactivate EGS
Read Data
Reset Module E E E E
SecureDrive Command E
Security Receive
Security Send
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 23 of 31
Service
MSID
PSID
KDF
Salt
SD_CA
Key
SD_BFW
Key
SD_SM
Key
PROD_GROUP
Key
OEM_FW
Key
OEM_OFS
Key
Self-Test (KATs)
Set
Set Data Range Attributes for a non-SUDR
Set Data Range Attributes for a SUDR
Set Data Store
SoC Rebuild
Start Session
Status Output
Write Data
Zeroize I GSZ
Table 13 - PSP Access Rights within Roles & Services
6. Operational Environment
The Cryptographic Module operating environment is non-modifiable. Therefore, the FIPS 140-2 operational
environment requirements are not applicable to this module. When operational, the Cryptographic Module prohibits
additions, deletions, or modification of the code working set. For firmware upgrades, the Cryptographic Module uses
the Firmware Download service to verify the digital signature of the firmware image and save a complete firmware
image. If the download operation is successful, authorized, and verified the Cryptographic Module may begin
operating with the new code working set. Firmware loaded into the module that is not on the FIPS 140-2 certificate
is out of the scope of this validation and requires a separate FIPS 140-2 validation.
7. Security Rules
The Cryptographic Module enforces applicable FIPS 140-2 Level 2 security requirements. This section documents
the security rules that the Cryptographic Module enforces.
7.1 Invariant Rules
1. The Cryptographic Module supports two distinct types of operator roles: Crypto Officer and User.
2. Power cycling the Cryptographic Module or exiting a TCG sessions clears active authentications.
3. The Cryptographic Module requires operators to re-authenticate to TCG Authorities after power cycling
the module or upon execution of the End Session service.
4. The Cryptographic Module powers up in FIPS Approved mode.
5. When the Cryptographic Module is unable to authenticate TCG Credentials, operators do not have access
to any cryptographic service other than the unauthenticated Generate Random service.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 24 of 31
6. The Cryptographic Module performs the following tests. Upon failure of any test, the Cryptographic
Module enters a soft error state. The Cryptographic module reports the error condition by transmitting
an UEC to the host over the U.2 interface. After entering the soft error state, the Cryptographic Module
cannot execute security services unless a power cycle clears the error state.
a. Power up Self-Tests
i. RSA 2048 PKCS#1 v1.5 Verify KAT, Cert# A1184
ii. Firmware Integrity, RSAPKCS#1 v1.5 2048 Digital Signature, Cert# A1184
iii. AES ECB Encrypt KAT, Cert# AES 3913
iv. AES ECB Decrypt KAT, Cert# AES 3913
v. SHA-256 KAT, Cert# SHS 2942
vi. HMAC-SHA2-256 KAT, Cert# HMAC 2280
vii. AES ECB Encrypt KAT, Cert# AES 3580
viii. AES ECB Decrypt KAT, Cert# AES 3580
ix. RSA 2048 PKCS#1 v1.5 Verify KAT, Cert# A1025
x. Key Wrap KAT, KW-AE, Cert# A102520
xi. Key Wrap KAT, KW-AD, Cert# A102519
xii. DRBG KAT21, Cert# A1025
xiii. PBKDF2 KAT, Cert# A1025
xiv. SP 800-90B Entropy Source Health Test
xv. AES ECB Encrypt KAT, DEE, Cert# C1973
xvi. AES ECB Decrypt KAT, DEE, Cert# C1973
b. Conditional Tests
i. The Cryptographic Module performs a Repetition Count Test and Adaptive Proportion Test on
the ENT (P) entropy source. These entropy source health tests are executed each time the
DRBG is reseeded at powered up and as the result of DRBG reseed event, which occurs after
the DRBG consumes 232 bits of seed data.
ii. The Cryptographic Module performs a key comparison test on each LRK.AESKey/LRK.XTS
keyset and its associated NSK.AESKey/NSK.XTS keyset to assure compliance with IG A.9
XTS-AES Key Generation Requirements.
iii. Firmware Download Test, RSA 2048 PKCS#1 v1.5 (Cert# A1025), SHA-256 (Cert# SHS
2942)
7. An operator can command the Cryptographic Module to perform the power-up self-test by power
cycling the module.
8. Power-up self-tests do not require operator action.
9. Data output is inhibited during key generation, self-tests, zeroization, and error states.
10. Status information does not contain CSPs or sensitive data that if misused, could compromise the
Cryptographic Module.
11. The Zeroize service deletes all plaintext keys and CSPs.
12. The SoC Rebuild service deletes the Root Keyset and Global Active Keyset.
13. The Cryptographic Module does not support a maintenance role.
14. The Cryptographic Module does not support manual key entry.
20 Utilizes AES-ECB-256 (Cert# AES 3913)
21 The DRBG KAT is inclusive of the instantiate, generate and reseed function health tests required in [SP 800-90A]
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 25 of 31
15. The Cryptographic Module does not have any external input/output devices used for entry/output of data.
16. The Cryptographic Module does not output plaintext CSPs.
17. The Cryptographic Module does not output intermediate key values.
18. The Cryptographic Module does not support concurrent operators.
19. The Crypto Officer shall assure that all host issued Authority PINs are 32-bytes in length.
7.2 Initialization Instructions
The MSID value is set at manufacturing time by the storage device. It represents the default TCG Credential for the
SID authority and the Locking SP Admin1 authority. This value is electronically readable, by the host, over the host
interface.
During enrollment, the host reads the MSID value from the Cryptographic Module and uses it to authenticate and
change TCG Credential values within the Cryptographic Module.
Having the MSID Credential value electronically available to the host constitutes a risk to the overall security of the
Cryptographic Module. Therefore, as best practice, the host should execute a Take-Ownership scenario the first time
the Cryptographic Module is inserted into a system.
Recommended Take-Ownership Scenario
1. StartSession to ‘Admin SP’
a. Get MSID
b. Use the MSID to authenticate to the SID authority.
i. An authentication failure indicates that a tamper event has occurred for the Cryptographic
Module.
c. Set the SID PIN to a new 32-byte value.
d. Optional:
i. Enable Admin SP Admin1.
ii. Set the Admin SP Admin1 PIN to a non-MSID 32-byte value.
e. Execute the TCG Activate command.
f. EndSession
2. Optional:
a. StartSession to ‘Locking SP’
i. Use the SID PIN established at step 1.c to authenticate to the Locking SP Admin1 authority.
ii. Set the Locking SP Admin1 PIN to a new 32-byte value.
iii. Enable Locking SP Admin2.
iv. Set the Locking SP Admin2 PIN to a non-MSID 32-byte value.
v. Repeat steps 2.a.iii and 2.a.iv for Locking SP Admin [3-4].
vi. Enable Locking SP User1.
vii. Set the Locking SP User1 PIN to a non-MSID 32-byte value.
viii. Repeat steps 2.a.vi and 2.a.vii for Locking SP User [2-9].
b. EndSession
If any of the above-mentioned steps fail, the Crypto Officer should remove the device from the system, as malicious
behavior may have compromised the Cryptographic Module.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 26 of 31
7.3 Zeroization Rules
The Crypto Officer shall use the Zeroize service, which utilizes the TCG Revert Method, to zeroize all CSPs, apart
from the Root Keyset and the Global Active Keyset. After successfully executing the Zeroize service, the Crypto
Officer should, as a best practice, power cycle the Cryptographic Module.
The SoC Rebuild service zeroizes and regenerates the Root Keyset and the Global Active Keyset. Executing this
process exhausts an SoC life. The CM is inoperable when the life count reaches zero. The Crypto Officer shall assure
that SoC Rebuild service is never execute unless necessary to protect the integrity of the Cryptographic Module.
8. Physical Security Policy
8.1 Mechanisms
The Cryptographic Module does not make claims in the Physical Security area beyond FIPS 140-2 Security Level 2.
• All components are production-grade materials with standard passivation.
• The Cryptographic Module enclosure is opaque and enclosed installed within the host system.
• Engineering design supports opacity requirements.
• Western Digital applies three (3) tamper-evident security seal during manufacturing. See Figure 2.
• The tamper-evident security seal cannot be penetrated or removed and reapplied without evidence of
tampering. In addition, it is difficult to replicate the of tamper-evident security seal.
Figure 3: Tamper-Evident Seal
8.2 Operator Responsibility
The Crypto Officer and/or User shall inspect the Cryptographic Module enclosure at installation and at least once a
year thereafter for evidence of tampering. See Figure 3: Tamper Evidence on Tamper Seal. If the inspection reveals
evidence of tampering, the Crypto Officer should return the module to Western Digital.
Figure 4: Tamper Evidence on Tamper Seal
1
3
2
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 27 of 31
9. Mitigation of Other Attacks Policy
The Cryptographic Module lacks features to mitigate any specific attacks beyond the scope of the requirements within
FIPS 140-2.
10. Definitions
• Access Control Element: A Boolean expression of authorities.
• Access Control List: A list of access control elements.
• Allowed: NIST approved, i.e., recommended in a NIST Special Publication, or acceptable, i.e., no known
security risk as opposed to deprecated, restricted, and legacy use. [SP800-131A]
• Anybody: A formal TCG term for an unauthenticated role [1].
• Approved mode of operation: A mode of the Cryptographic Module that employs only approved security
functions. [FIPS140]
• Approved: [FIPS140] approved or recommended in a NIST Special Publication.
• Authenticate: Prove the identity of an Operator or the integrity of an object.
• Authorize: Grant an authenticated Operator access to a service or an object.
• Ciphertext: Encrypted data transformed by an Approved security function.
• Confidentiality: A cryptographic property that sensitive information is not disclosed to unauthorized parties.
• Credential: A formal TCG term for data used to authenticate an Operator [1].
• Critical Security Parameter (CSP): Security-related information (e.g., secret, and private cryptographic keys,
and authentication data such as credentials and PINs) whose disclosure or modification can compromise the
security of a Cryptographic Module. [FIPS140]
• Cryptographic Boundary: An explicitly defined continuous perimeter that establishes the physical bounds of
a Cryptographic Module and contains all the hardware, software, and/or firmware components of a
Cryptographic Module. [FIPS140]
• Cryptographic key (Key): An input parameter to an Approved cryptographic algorithm
• Cryptographic Module: The set of hardware, software, and/or firmware used to implement approved security
functions contained within the cryptographic boundary. [FIPS140]
• Crypto Officer: An Operator performing cryptographic initialization and management functions. [FIPS140]
• Data at Rest: User data residing on the storage device media when the storage device is powered off.
• Discovery: A TCG method that provides the properties of the TCG device. [TCG Enterprise]
• Drive Writes per Day (DWPD): Drive Writes per Day defines how many times the entire capacity of the
HDD can be overwrite every single day of its usable life without failure during the warranty period.
• Hardware Security Module (HSM): A hardware security module is a physical computing device that
safeguards and manages digital keys, performs encryption and decryption functions for digital signatures, strong
authentication, and other cryptographic functions.
• Integrity: A cryptographic property to assure sensitive data has not been modified or deleted in an
unauthorized and undetected manner.
• Interface: A logical entry or exit point of a Cryptographic Module that provides access to the Cryptographic
Module for logical information flows. [FIPS140]
• Internal RAM (IRAM): RAM memory that is internal to an SoC.
• Key Derivation Function (KDF): An Approved cryptographic algorithm by which one or more keys are
derived from a shared secret and other information.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 28 of 31
• Key Encrypting Key (KEK): A cryptographic key used to encrypt or decrypt other keys.
• Key management: The activities involving the handling of cryptographic keys and other related security
parameters during the entire life cycle of the Cryptographic Module. The handling of authentication data is
representative of a key management activity.
• Key Wrap: An Approved cryptographic algorithm that uses a KEK to provide Confidentiality and Integrity.
• LBA Range: A formal TCG SWG [1] term that defines a contiguous logical block range (sequential LBAs) to
store encrypted User Data; ranges do not overlap, and each has its own unique encryption key and other
settable properties.
• Manufactured SID (MSID): A unique default value assigned to each SED during manufacturing. An
externally visible MSID value is not required if the user can derive the MSID from other information printed
on the drive. The MSID is readable with the TCG protocol. It is the initial and default value for all TCG
credentials [1].
• Method: A remote procedure call to an SP that initiates an action on the SP [1].
• Namespace: A namespace is a collection of logical blocks that range from zero (0) to the capacity of the
namespace.
• Namespace Identifier (NSID): A namespace identifier is an identifier used by a controller to provide access
to a namespace.
• OFS file: OFS files are used to reset the Cryptographic Module’s configuration back to its original factory
setting during the Revert operations (e.g., TCG Revert).
• Operator: A consumer, either human or automation, of cryptographic services that is external to the
Cryptographic Module. [FIPS140]
• Personal Identification Number (PIN): A formal TCG term designating a string of octets used to
authenticate an identity [1].
• Plaintext: Unencrypted data.
• Port: A physical entry or exit point of a Cryptographic Module that. A port provides access to the
Cryptographic Module’s physical signals. [FIPS140]
• PSID (Physical Security Identifier): A SED unique value printed on the Cryptographic Module’s label used
as authentication data and proof of physical presence for the Zeroize service.
• Public Security Parameters (PSP): Public information, that if modified can compromise the security of the
Cryptographic Module (e.g., a public key).
• Read Data: An external request to transfer User Data from the SED. [SCSI Block]
• Reserved Area: Private data on the Storage Medium that is not accessible outside the Cryptographic
Boundary.
• Sanitize: Sanitization cryptographically erases all user data in the NVM subsystem such that recovery of any
previous user data from any cache, non-volatile media, or any controller memory buffer is not possible.
• SD_CA Key: Storage Device Certification Authority Key (X509v3). This key serves as the Cryptographic
Module’s Master RSA Public Key and is the root source of verification for all other key certificates. The
SD_CA Key signs the SecureLoader. This key is injected at manufacturing time and a hash of this key is stored
as OTP bits.
• Security Identifier (SID): The authority that represents the TPer owner [1]. Crypto Officer serves in this
role.
• Security Provider (SP): A TCG term used to define a collection of Tables and Methods with access control.
• Self-Encrypting Drive (SED): A storage device that provides data storage services, which automatically
encrypts all user data written to the device and automatically decrypts all user data read from the device.
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 29 of 31
• Session: A formal TCG term that envelops the lifetime of an Operator’s authentication [1].
• Small Form Factor (SFF): Small form factor is a computer form factor designed to minimize the volume and
footprint of a desktop computer
• Storage Medium: The non-volatile, persistent storage location of a SED; it is partitioned into two disjoint
sets, a User Data area, and a Reserved Area.
• Table: The basic data structures within a Security Provider (SP). The tables store persistent SP state data
defined in TCG Storage Core specification [1].
• TPer: A Trusted Peripheral. The Trusted Peripheral (TPer) resides in a Storage Device. The TPer manages
trusted storage-related functions and data structures as defined in TCG Storage Core specification [1].
• Triple Level Cell (TLC): Triple level cells refer to NAND flash devices that store three bits of information
per cell, with eight total voltage states.
• User Data: Data transferred from/to a SED using the Read Data and Write Data commands. [SCSI Block]
• User: An Operator that consumes cryptographic services. [FIPS140]
• Write Data: An external request to transfer User Data to a SED. [SCSI Block]
• Zeroize: Invalidate a Critical Security Parameter. [FIPS140]
11. Key Words
The Key Words “SHALL”, “SHALL NOT”, “SHOULD,” and “MAY” if used in this document are to be interpreted
as described in [9].
12. Acronyms
• ACL: Access Control List
• AEK: Active Encryption Key
• AES: Advanced Encryption Standard (FIPS
197)
• BLRE: Boot Loader
• CAC: Cryptographic Assist Controller
• CBC: Cipher Block Chaining, an operational
mode of AES
• CM: Cryptographic Module
• CO: Crypto Officer [FIPS140]
• CRC: Cyclic Redundancy Check
• CSP: Critical Security Parameter [FIPS140]
• DEE: Data Encryption Engine
• DRAM: Dynamic Random Access Memory
• DRBG: Deterministic Random Bit Generator
• DW/D: Drive Writes per Day
• EDC: Error Detection Code
• EMI: Electromagnetic Interference
• FSEC: Flash Security Data
• FID: Flash Internal Data
• FIPS: Federal Information Processing Standard
• HDD: Hard Disk Drive
• IRAM: Internal RAM
• IV: Initialization Vector
• KAT: Known Answer Test
• KDF: Key Derivation Function
• LBA: Logical Block Address
• MEK: Media Encryption Key
• MSID: Manufactured Security Identifier
• NAND: Negative AND, Flash Memory
technology
• NOR: Negative OR, Flash Memory technology
• NDRNG: Non-deterministic Random Number
Generator
• NIST: National Institute of Standards and
Technology
• NSID: Namespace Identifier
• NVM: Non-volatile Memory
• NVMe: NVM Express
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 30 of 31
• OFS: Original Factory Setting
• PBKDF2: Password Base Key Derivation
Function
• PCIe: Peripheral Component Interconnect
Express
• PIN: Personal Identification Number
• POR: Power on Reset
• PSID: Physical Security Identifier
• PSP: Public Security Parameter
• RID: Reserved Area Internal Data
• SAS: Serial Attached SCSI
• SECD: Security Data
• SED: Self-Encrypting Drive
• SCSI: Small Computer System Interface
• SD_CA: Storage Device Certification Authority
• SED: Self Encrypting Drive
• SFF: HDD Form Factor or Small Form Factor
• SID: Security Identifier, The TCG authority
representing the Cryptographic Module owner
• SIO: Serial Input/Output
• SoC: System-on-a-Chip
• SP: Security Provider or Security Partition
(TCG), also Security Policy (FIPS 140)
• SSC: Subsystem Class
• SSD: Solid-state Drive
• SWG: Storage Work Group
• TCG: Trusted Computing Group
• TLC: Triple Level Cell
• UEC: Universal Error Code
• XTS: A mode of AES that utilizes "Tweakable"
block ciphers
13. References
13.1 NIST Specifications
• [AES] Advanced Encryption Standard, FIPS PUB 197, NIST, November 2001
• [DSS] Digital Signature Standard, FIPS PUB 186-4, NIST, July 2013
• [FIPS140] Security Requirements for Cryptographic Modules, FIPS PUB 140-2, NIST, December 2002
• [HMAC] The Keyed-Hash Message Authentication Code, FIPS PUB 198-1, July 2008
• [SHA] Secure Hash Standard (SHS), FIPS PUB 180-4, NIST, August 2015
• [SP800 38A] Recommendation for Block Cipher Modes of Operation: Methods and Techniques, NIST,
December 2001
• [SP800 38E] Recommendation for Block Cipher Modes of Operation: The XTS-AES Mode for Confidentiality
on Storage Devices, SP800-38E, NIST, January 2010
• [SP800 38F] Recommendation for Block Cipher Modes of Operation: Methods for Key Wrapping, NIST,
December 2012
• [SP800 57] Recommendation for Key Management – Part I General (Revision 4), NIST, January 2016
• [SP800 90A] Recommendation for Random Number Generation Using Deterministic Random Bit Generators
(Revision 1), NIST, June 2015
• [SP800 90B] Recommendation for the Entropy Sources Used for Random Bit Generation, NIST, January 2018
• [SP800 131A] Transitions: Recommendation for Transitioning the Use of Cryptographic Algorithms and Key
Lengths (Revision 2), NIST, March 2019
• [SP800 132] Recommendation for Password-Based Key Derivation, NIST, December 2010
• [SP800 133] Recommendation for Cryptographic Key Generation (Revision 2), NIST, June 2020
13.2 Trusted Computing Group Specifications
• [1] TCG Storage Architecture Core Specification, Specification Version 2.01 Revision 1.00 (August 5, 2015)
Ultrastar DC SN840 NVMe™ PCIe 3.0 Self Encrypting Drive Cryptographic Module Non-Proprietary Security Policy
Page 31 of 31
• [2] TCG Storage Security Subsystem Class: Opal, Specification Version 2.01, Final Revision 1.00 (August 5,
2015)
• [3] TCG Storage Opal SSC Feature Set: PSID, Specification Version 1.00, Final Revision 1.00 (August 5, 2015)
• [4] TCG Storage Opal SSC Feature Set: Configurable Namespace Locking, Specification Version 1.00, Final
Revision 1.33 (February 22, 2019)
• [5] TCG Storage Opal SSC Feature Set: Single User Mode, Specification Version 1.00, Final Revision 1.00
(February 24, 2012)
• [6] TCG Storage Opal Integration Guidelines, Version 1.00, Final Revision 1.00 (March 16, 2016)
• [7] TCG Storage Interface Interactions Specification (SIIS), Version 1.07, (January 30, 2018)
• [8] TCG Storage Security Subsystem Class: Ruby, Version 1.00, Revision 1.00 (January 7, 2020)
13.3 International Standards
• [9] IETF RFC 2119, 1997, “Key words for use in RFCs to Indicate Requirement Levels”
• [10] NVM Express™, Revision 1.3.c, May 24, 2018
• [11] NVM Express™ Management Interface, Revision 1.1, April 29, 2019
• [12] PCI Express® Base Specification, Revision 3.0, November 10 ,2010
• [13] SCSI Block Commands - 3, Revision 22, March 29, 2010
• [14] Security Features for SCSI Commands, Revision 2, September 25, 2015
• [15] SCSI Primary Commands - 5, Revision 22, April 19, 2019
• [16] Protocol Agnostic Multi-Lane High Speed Connector, Revision 1.3, February 19, 2020
13.4 Corporate Documents
• [Datasheet] Ultrastar DC SN840 Datasheet, 02-05-WW-04-00227-A05 (September 2020),
https://www.westerndigital.com/support