## Chainguard, Inc. Chainguard FIPS Provider for OpenSSL ## FIPS 140-3 Non-Proprietary Security Policy Document Version: 1.2 Last Updated: 2026-08-21 Prepared by: atsec information security corporation 4516 Seton Center Pkwy, Suite 250 Austin, TX 78759 [www.atsec.com](http://www.atsec.com/) Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## Table of Contents | 1 General ........................................................................................................................................ | 6 | |------------------------------------------------------------------------------------------------------------------------------------------------------|-----| | 1.1 Overview .................................................................................................................................. | 6 | | 1.2 Security Levels ......................................................................................................................... | 6 | | 1.3 Additional Information ........................................................................................................... | 6 | | 2 Cryptographic Module Specification ......................................................................................... | 7 | | 2.1 Description ............................................................................................................................... | 7 | | 2.2 Tested and Vendor Affirmed Module Version and Identification ........................................ | 8 | | 2.3 Excluded Components ........................................................................................................... | 11 | | 2.4 Modes of Operation ............................................................................................................... | 11 | | 2.5 Algorithms .............................................................................................................................. | 11 | | 2.6 Security Function Implementations ..................................................................................... | 27 | | 2.7 Algorithm Specific Information ............................................................................................ | 59 | | 2.7.1 AES XTS ....................................................................................................................... | 59 | | 2.7.2 Key Derivation using SP 800-132 PBKDF2 ............................................................... | 59 | | 2.7.3 Compliance to SP 800-56Arev3 Assurances .............................................................. | 59 | | 2.7.4 SHA-3 and SHAKE ...................................................................................................... | 60 | | 2.7.5 Legacy Algorithms ....................................................................................................... | 60 | | 2.7.6 RSA Signatures ............................................................................................................ | 60 | | 2.7.7 RSA Key Generation ................................................................................................... | 60 | | 2.7.8 Key Wrapping with AES ............................................................................................. | 60 | | 2.7.9 AES GCM IV ................................................................................................................ | 60 | | 2.7.10 Compliance to SP 800-56Br2 Assurances ................................................................. | 61 | | 2.7.11 Compliance to SP 800-227 ........................................................................................ | 61 | | 2.7.12 Compliance to FIPS 203 ............................................................................................ | 62 | | 2.7.13 Compliance to FIPS 204 ............................................................................................ | 62 | | 2.8 RBG and Entropy ................................................................................................................... | 62 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 2 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | 2.9 | Key Generation ................................................................................................................. 63 | |----------------------------------------------------------------------------------------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------| | 2.10 Key Establishment | ............................................................................................................... 63 | | 2.11 Industry Protocols................................................................................................................ | 63 | | 3 Cryptographic Module Interfaces | ............................................................................................ 65 | | 3.1 Ports and Interfaces ............................................................................................................... | 65 | | 4 Roles, Services, and Authentication ........................................................................................ | 66 | | 4.1 Authentication Methods | ....................................................................................................... 66 | | 4.2 Roles ....................................................................................................................................... | 66 | | 4.3 Approved Services | ................................................................................................................. 66 | | 4.4 Non-Approved Services ......................................................................................................... | 90 | | 5 Software/Firmware Security | .................................................................................................... 92 | | 5.1 Integrity Techniques | ............................................................................................................. 92 | | 5.2 Initiate on Demand | ................................................................................................................ 92 | | 6 Operational Environment | ........................................................................................................ 93 | | 6.1 Operational Environment Type and Requirements | ............................................................ 93 | | 6.2 Configuration Settings and Restrictions ............................................................................... | 93 | | 7 Physical Security | ....................................................................................................................... 94 | | 8 Non-Invasive Security | .............................................................................................................. 95 | | 9 Sensitive Security Parameters Management ........................................................................... | 96 | | 9.1 Storage Areas | .......................................................................................................................... 96 | | 9.2 SSP Input-Output Methods ................................................................................................... | 96 | | 9.3 SSP Zeroization Methods | ...................................................................................................... 96 | | 9.4 SSPs ......................................................................................................................................... | 97 | | 10 Self-Tests ............................................................................................................................... | 119 | | 10.1 Pre-Operational Self-Tests ................................................................................................ | 119 | | 10.2 Conditional Self-Tests | ........................................................................................................ 120 | | 10.3 Periodic Self-Test Information | .......................................................................................... 126 | | 10.4 Error States | ......................................................................................................................... 127 | | 10.5 Operator Initiation of Self-Tests | ....................................................................................... 128 | | 11 Life-Cycle Assurance | ............................................................................................................ 129 | | 11.1 Installation, Initialization, and Startup Procedures ......................................................... | 129 | | 11.2 Administrator Guidance .................................................................................................... | 129 | | 11.3 Non-Administrator Guidance | ........................................................................................... 129 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 3 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | 11.4 End of Life .......................................................................................................................... | 129 | |-----------------------------------------------------------------------------------------------------------------------------------------------|-------| | 12 Mitigation of Other Attacks ................................................................................................. | 130 | | 12.1 Attack List .......................................................................................................................... | 130 | | 12.2 Mitigation Effectiveness .................................................................................................... | 130 | | Appendix A. Glossary and Abbreviations ................................................................................ | 131 | | Appendix B. References ............................................................................................................. | 133 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 4 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## List of Tables | Table 1: Security Levels ................................................................................................................................................ 6 | |-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Table 2: Tested Module Identification - Software, Firmware, Hybrid (Executable Code Sets) ............................... 8 | | Table 3: Tested Operational Environments - Software, Firmware, Hybrid .............................................................. 9 | | Table 4: Vendor-Affirmed Operational Environments - Software, Firmware, Hybrid .......................................... 11 | | Table 5: Modes List and Description ......................................................................................................................... 11 | | Table 6: Approved Algorithms ................................................................................................................................... 26 | | Table 7: Vendor-Affirmed Algorithms ...................................................................................................................... 26 | | Table 8: Non-Approved, Allowed Algorithms with No Security Claimed .............................................................. 26 | | Table 9: Non-Approved, Not Allowed Algorithms ................................................................................................... 27 | | Table 10: Security Function Implementations .......................................................................................................... 59 | | Table 11: Entropy Certificates ................................................................................................................................... 62 | | Table 12: Entropy Sources .......................................................................................................................................... 62 | | Table 13: Ports and Interfaces .................................................................................................................................... 65 | | Table 14: Roles ............................................................................................................................................................ 66 | | Table 15: Approved Services ...................................................................................................................................... 89 | | Table 16: Non-Approved Services ............................................................................................................................. 91 | | Table 17: Storage Areas .............................................................................................................................................. 96 | | Table 18: SSP Input-Output Methods ....................................................................................................................... 96 | | Table 19: SSP Zeroization Methods ........................................................................................................................... 97 | | Table 20: SSP Table 1 ............................................................................................................................................... 111 | | Table 21: SSP Table 2 ............................................................................................................................................... 118 | | Table 22: Pre-Operational Self-Tests ....................................................................................................................... 119 | | 126 Table 24: Pre-Operational Periodic Information .................................................................................................... 126 | | Table 23: Conditional Self-Tests .............................................................................................................................. | | Table 25: Conditional Periodic Information ........................................................................................................... 127 | | List of Figures Figure 1: Block Diagram ............................................................................................................................................... 8 | | Table 26: Error States ............................................................................................................................................... 128 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 5 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 1 General ### 1.1 Overview This document is the non-proprietary FIPS 140-3 Security Policy for the Chainguard FIPS Provider for OpenSSL. It contains the security rules under which the module must operate and describes how this module meets the requirements as specified in FIPS PUB 140-3 (Federal Information Processing Standards Publication 140-3) for an overall Security Level 1 module. This Non-Proprietary Security Policy may be reproduced and distributed, but only whole and intact and including this notice. ### 1.2 Security Levels Table 1: Security Levels | Section | Title | Security Level | |-----------|-----------------------------------------|------------------| | 1 | General | 1 | | 2 | Cryptographic module specification | 1 | | 3 | Cryptographic module interfaces | 1 | | 4 | Roles, services, and authentication | 1 | | 5 | Software/Firmware security | 1 | | 6 | Operational environment | 1 | | 7 | Physical security | N/A | | 8 | Non-invasive security | N/A | | 9 | Sensitive security parameter management | 1 | | 10 | Self-tests | 1 | | 11 | Life-cycle assurance | 1 | | 12 | Mitigation of other attacks | 1 | | | Overall Level | 1 | ### 1.3 Additional Information In preparing the Security Policy document, the laboratory formatted the vendor-supplied documentation for consolidation without altering the technical statements therein contained. The further refining of the Security Policy document was conducted iteratively throughout the conformance testing, wherein the Security Policy was submitted to the vendor, who would then edit, modify, and add technical contents. The vendor would also supply additional documentation, which the laboratory formatted into the existing Security Policy, and resubmitted to the vendor for their final editing. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 6 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 2 Cryptographic Module Specification ### 2.1 Description ##### Purpose and Use: The Chainguard FIPS Provider for OpenSSL (hereafter referred to as 'the module') is defined as a software module in a multi-chip standalone embodiment. It provides a C language application program interface (API) for use by other applications that require cryptographic functionality. The module consists of one software component, the 'FIPS provider' i.e., fips.so, which implements the FIPS requirements, and the cryptographic functionality provided to the operator. ##### Module Type: Software ##### Module Embodiment: Multi-Chip Standalone ##### Module Characteristics ##### Cryptographic Boundary: The cryptographic boundary is represented by the component in the orange block, that is, the shared library implementing the FIPS provider (fips.so). ##### Tested Operational Environment's Physical Perimeter (TOEPP): Figure 1 shows a block diagram that represents the design of the module when the module is operational and providing services to other user space applications. In this diagram, the physical perimeter of the operational environment (a general-purpose computer on which the module is installed) is indicated by a purple dashed line. Components in white are only included in the diagram for informational purposes. They are not included in the cryptographic boundary (and therefore not part of the module's validation). For example, the kernel is responsible for managing system calls issued by the module itself, as well as other applications using the module for cryptographic services. The connecting lines indicate the flow of data between the cryptographic module and its operator application, through the logical interfaces defined in Section 3. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 7 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Figure 1: Block Diagram ### 2.2 Tested and Vendor Affirmed Module Version and Identification Tested Module Identification - Software, Firmware, Hybrid (Executable Code Sets): Table 2: Tested Module Identification - Software, Firmware, Hybrid (Executable Code Sets) | Package or File Name | Software/ Firmware Version | Features | Integrity Test | |------------------------------------------------------------------------------------------------------------------------------|------------------------------|------------|------------------| | fips.so on Chainguard Image 20230214 on Amazon Linux 2023 on EC2 m7i.metal-24xl on Intel Sapphire Rapids Xeon Platinum 8488C | 3.6.0-r4 | N/A | HMAC- SHA-256 | | fips.so on Chainguard Image 20230214 on Amazon Linux 2023 on EC2 m7g.metal on Amazon Graviton3 AWS Graviton3 | 3.6.0-r4 | N/A | HMAC- SHA-256 | Tested Operational Environments - Software, Firmware, Hybrid: © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 8 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 3: Tested Operational Environments - Software, Firmware, Hybrid | Operating System | Hardware Platform | Processors | PAA/PAI | Hypervisor or Host OS | Version(s) | |------------------------------------------------|---------------------|---------------------------|-----------|-------------------------|--------------| | Chainguard Image 20230214 on Amazon Linux 2023 | EC2 m7i.metal- 24xl | Intel Xeon Platinum 8488C | Yes | N/A | 3.6.0-r4 | | Chainguard Image 20230214 on Amazon Linux 2023 | EC2 m7i.metal- 24xl | Intel Xeon Platinum 8488C | No | N/A | 3.6.0-r4 | | Chainguard Image 20230214 on Amazon Linux 2023 | EC2 m7g.metal | AWS Graviton3 | Yes | N/A | 3.6.0-r4 | | Chainguard Image 20230214 on Amazon Linux 2023 | EC2 m7g.metal | AWS Graviton3 | No | N/A | 3.6.0-r4 | ##### Vendor-Affirmed Operational Environments - Software, Firmware, Hybrid: | Operating System | Hardware Platform | |--------------------|----------------------------------------------------------------------------------------| | glibc 2.34+ (Host) | Generic Hardware Platform ELF x86-64-v2+ | | glibc 2.34+ (Host) | Generic Hardware Platform ELF ARMv8a+ | | AlmaLinux 9 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | AlmaLinux 9 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | AlmaLinux 10 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | AlmaLinux 10 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Amazon Linux 2 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | Amazon Linux 2 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Amazon Linux 2023 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | Amazon Linux 2023 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Azure Linux 2 | Azure Esv5-series with Intel Xeon Platinum 8473C, PAA/PAI, under Azure Host Hypervisor | | Azure Linux 2 | Azure Dpsv6-series with Azure Cobalt 100, PAA/PAI, under Azure Host Hypervisor | | Azure Linux 3 | Azure Esv5-series with Intel Xeon Platinum 8473C, PAA/PAI, under Azure Host Hypervisor | | Azure Linux 3 | Azure Dpsv6-series with Azure Cobalt 100, PAA/PAI, under Azure Host Hypervisor | | Bottlerocket | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488CC, PAA/PAI | | Bottlerocket | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Centos Stream 9 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | Centos Stream 9 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Centos Stream 10 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | Centos Stream 10 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Chainguard | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 9 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Operating System | Hardware Platform | |-------------------------------------|----------------------------------------------------------------------------------------| | Chainguard | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Chainguard (Host) | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | Chainguard (Host) | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Chainguard (Host) | Azure Esv5-series with Intel Xeon Platinum 8473C, PAA/PAI, under Azure Host Hypervisor | | Chainguard (Host) | Azure Dpsv6-series with Azure Cobalt 100, PAA/PAI, under Azure Host Hypervisor | | Chainguard (Host) | GCP c3-highcpu-192-metal with Intel Xeon Platinum 8481C, PAA/PAI, under Titanium | | Chainguard (Host) | GCP c4a with Google Axion, PAA/PAI | | Chainguard (Host) | Raspberry Pi 5 B Rev 1.0 8GB with Broadcom BCM2712, PAA/PAI | | Debian 12 Bookworm | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | Debian 12 Bookworm | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Debian 13 Trixie | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | Debian 13 Trixie | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Google COS | GCP c3-highcpu-192-metal with Intel Xeon Platinum 8481C | | Google COS | GCP c4a with Google Axion, PAA/PAI, under Titanium | | RHEL 9 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | RHEL 9 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | RHEL 10 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | RHEL 10 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | RockyLinux 9 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | RockyLinux 9 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | RockyLinux 10 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | RockyLinux 10 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | SUSE Linux Enterprise Server 15 SP6 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | SUSE Linux Enterprise Server 15 SP6 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | SUSE Linux Enterprise Server 16 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | SUSE Linux Enterprise Server 16 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Ubuntu 20.04 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | Ubuntu 20.04 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Ubuntu 22.04 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | Ubuntu 22.04 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Ubuntu 24.04 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 10 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 4: Vendor-Affirmed Operational Environments - Software, Firmware, Hybrid | Operating System | Hardware Platform | |--------------------|---------------------------------------------------------------| | Ubuntu 24.04 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | | Ubuntu 26.04 | AWS EC2 m7i.metal-24x with Intel Xeon Platinum 8488C, PAA/PAI | | Ubuntu 26.04 | AWS EC2 m7g.metal with AWS Graviton3, PAA/PAI | The CMVP makes no statement as to the correct operation of the module or the security strengths of the generated SSPs when the module is ported if the specific operational environments are not listed on the validation certificate. ### 2.3 Excluded Components There are no components excluded from the module. ### 2.4 Modes of Operation ##### Modes List and Description: Table 5: Modes List and Description | Mode Name | Description | Types of Services | Status Indicator | |-------------------|---------------------------------------------------------------------|---------------------|------------------------------------------------------| | Approved mode | Automatically entered whenever an approved service is requested | Approved | Equivalent to the indicator of the requested service | | Non-approved mode | Automatically entered whenever a non- approved service is requested | Non-Approved | Equivalent to the indicator of the requested service | After passing all pre-operational self-test and cryptographic algorithm self-tests executed on start-up, the module automatically transitions to the approved mode of operation. ##### Mode Change Instructions and Status: The module automatically switches between the approved and non-approved modes depending on the services requested by the operator. The status indicator of the mode of operation is equivalent to the indicator of the service that was requested. ### 2.5 Algorithms ##### Approved Algorithms: The table below lists all implemented modes or methods of operation for the approved cryptographic algorithms of the module that are employed for approved services (Approved Services table). © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 11 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |-------------|-------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------| | AES-CBC | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - Decrypt, Encrypt Key Length - 128, 192, 256 | SP 800-38A | | AES-CBC-CS1 | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - decrypt, encrypt Key Length - 128, 192, 256 Payload Length - Payload Length: 128-65536 Increment 8 | SP 800-38A | | AES-CBC-CS2 | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - decrypt, encrypt Key Length - 128, 192, 256 Payload Length - Payload Length: 128-65536 Increment 8 | SP 800-38A | | AES-CBC-CS3 | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - decrypt, encrypt Key Length - 128, 192, 256 Payload Length - Payload Length: 128-65536 Increment 8 | SP 800-38A | | AES-CCM | A7579, A7587, A7588, A7594, A7595, A7613 | Key Length - 128, 192, 256 Tag Length - 112, 128, 32, 48, 64, 80, 96 IV Length - IV Length: 56, 64, 72, 80, 88, 96, 104 Payload Length - Payload Length: 0-256 Increment 8 AAD Length - AAD Length: 0-524288 Increment 8 | SP 800-38C | | AES-CFB1 | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - Decrypt, Encrypt Key Length - 128, 192, 256 | SP 800-38A | | AES-CFB128 | A7579, A7587, A7588, A7594, A7595, A7613, A8282 | Direction - Decrypt, Encrypt Key Length - 128, 192, 256 | SP 800-38A | | AES-CFB8 | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - Decrypt, Encrypt Key Length - 128, 192, 256 | SP 800-38A | | AES-CMAC | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - Generation Key Length - 128, 192, 256 MAC Length - MAC Length: 128 Message Length - Message Length: 8-524288 Increment 8 | SP 800-38B | | AES-CTR | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - Decrypt, Encrypt Key Length - 128, 192, 256 Payload Length - Payload Length: 8-128 Increment 8 Supports Counter larger than maximum value - No Incremental Counter - Yes Counter Tests Performed - Yes | SP 800-38A | | AES-ECB | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - Decrypt, Encrypt Key Length - 128, 192, 256 | SP 800-38A | | AES-GCM | A7580, A7581, A7582, A7589, A7590, A7596, | Direction - Decrypt, Encrypt IV Generation - External, Internal IV Generation Mode - 8.2.1, 8.2.2 | SP 800-38D | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 12 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |------------------------------|-------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------| | | A7597, A7598, A7599, A7600, A7601, A7602, A7603 | Key Length - 128, 192, 256 Tag Length - 104, 112, 120, 128, 32, 64, 96 IV Length - IV Length: 96 Payload Length - Payload Length: 128-65536 Increment 128 AAD Length - AAD Length: 0-65536 Increment 8 | | | AES-GMAC | A7580, A7581, A7582, A7589, A7590, A7596, A7597, A7598, A7599, A7600, A7601, A7602, A7603 | Direction - Decrypt, Encrypt IV Generation - External Key Length - 128, 192, 256 Tag Length - 104, 112, 120, 128, 32, 64, 96 IV Length - IV Length: 96 AAD Length - AAD Length: 0-65536 Increment 8 | SP 800-38D | | AES-KW | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - Decrypt, Encrypt Cipher - Cipher, Inverse Key Length - 128, 192, 256 Payload Length - Payload Length: 128-4096 Increment 128 | SP 800-38F | | AES-KWP | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - Decrypt, Encrypt Cipher - Cipher, Inverse Key Length - 128, 192, 256 Payload Length - Payload Length: 8-4096 Increment 8 | SP 800-38F | | AES-OFB | A7579, A7587, A7588, A7594, A7595, A7613 | Direction - Decrypt, Encrypt Key Length - 128, 192, 256 | SP 800-38A | | AES-XTS Testing Revision 2.0 | A7579, A7587, A7588, A7594, A7595, A7596, A7613 | Direction - Decrypt, Encrypt Key Length - 128, 256 Payload Length - Payload Length: 128-65536 Increment 8 Tweak Mode - Hex Data Unit Length Matches Payload Length - Yes | SP 800-38E | | Counter DRBG | A7579, A7587, A7588, A7594, A7595, A7613 | Prediction Resistance - No, Yes Supports Reseed - Yes Mode - AES-128, AES-192, AES-256 Derivation Function Enabled - No, Yes Additional Input - Additional Input: 0-512 Increment 128, Additional Input: 256, Additional Input: 320, Additional Input: 384 Entropy Input - Entropy Input: 128, Entropy Input: 192, Entropy Input: 256, Entropy Input: 320, Entropy Input: 384 Nonce - Nonce: 0, Nonce: 128, Nonce: 64, Nonce: 96 Personalization String Length - Personalization String Length: 0-512 Increment 128, Personalization String Length: 256, Personalization String Length: 320, Personalization String Length: 384 Returned Bits - 256 | SP 800-90A Rev. 1 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 13 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |----------------------------------------|-------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------|-------------| | Deterministic ECDSA SigGen (FIPS186-5) | A7583, A7591, A7604, A7606, A7608, A7614 | Curve - P-224, P-256, P-384, P-521 Hash Algorithm - SHA2-256, SHA2-384, SHA2-512 Component - No | FIPS 186-5 | | Deterministic ECDSA SigGen (FIPS186-5) | A7584 | Curve - P-224, P-256, P-384, P-521 Hash Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2- 512/256, SHA3-256, SHA3-384, SHA3-512 Component - No | FIPS 186-5 | | Deterministic ECDSA SigGen (FIPS186-5) | A7585, A7593, A7610, A7611, A7612 | Curve - P-224, P-256, P-384, P-521 Hash Algorithm - SHA3-256, SHA3-384, SHA3-512 Component - No | FIPS 186-5 | | ECDSA KeyGen (FIPS186-5) | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | Curve - P-224, P-256, P-384, P-521 Secret Generation Mode - testing candidates | FIPS 186-5 | | ECDSA KeyVer (FIPS186-4) | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | Curve - P-192 | FIPS 186-4 | | ECDSA KeyVer (FIPS186-5) | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | Curve - P-224, P-256, P-384, P-521 | FIPS 186-5 | | ECDSA SigGen (FIPS186-5) | A7583, A7591, A7604, A7606, A7608, A7614 | Curve - P-224, P-256, P-384, P-521 Hash Algorithm - SHA2-256, SHA2-384, SHA2-512 Component - No, Yes | FIPS 186-5 | | ECDSA SigGen (FIPS186-5) | A7584 | Curve - P-224, P-256, P-384, P-521 Hash Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2- 512/256, SHA3-256, SHA3-384, SHA3-512 Component - No, Yes | FIPS 186-5 | | ECDSA SigGen (FIPS186-5) | A7585, A7593, A7610, A7611, A7612 | Curve - P-224, P-256, P-384, P-521 Hash Algorithm - SHA3-256, SHA3-384, SHA3-512 Component - No, Yes | FIPS 186-5 | | ECDSA SigVer (FIPS186-4) | A7583, A7591, A7604, A7606, A7608, A7614 | Component - No Curve - P-192 Hash Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2- 512/256 | FIPS 186-4 | | ECDSA SigVer (FIPS186-4) | A7584 | Component - No Curve - P-192 Hash Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2- 512/256, SHA3-256, SHA3-384, SHA3-512 | FIPS 186-4 | | ECDSA SigVer (FIPS186-4) | A7585, A7593, A7610, A7611, A7612 | Component - No Curve - P-192 Hash Algorithm - SHA3-256, SHA3-384, SHA3-512 | FIPS 186-4 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 14 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |--------------------------|------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------|-------------| | ECDSA SigVer (FIPS186-5) | A7583, A7591, A7604, A7606, A7608, A7614 | Curve - P-224, P-256, P-384, P-521 Hash Algorithm - SHA2-256, SHA2-384, SHA2-512 | FIPS 186-5 | | ECDSA SigVer (FIPS186-5) | A7584 | Component - No Curve - P-224, P-256, P-384, P-521 Hash Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2- 512/256, SHA3-256, SHA3-384, SHA3-512 | FIPS 186-5 | | ECDSA SigVer (FIPS186-5) | A7585, A7593, A7610, A7611, A7612 | Component - No Curve - P-224, P-256, P-384, P-521 Hash Algorithm - SHA3-256, SHA3-384, SHA3-512 | FIPS 186-5 | | EDDSA KeyGen | A7583, A7591, A7604, A7606, A7608, A7614 | Curve - ED-25519 | FIPS 186-5 | | EDDSA KeyGen | A7584 | Curve - ED-25519, ED-448 | FIPS 186-5 | | EDDSA KeyGen | A7585, A7593, A7610, A7611, A7612 | Curve - ED-448 | FIPS 186-5 | | EDDSA KeyVer | A7583, A7591, A7604, A7606, A7608, A7614 | Curve - ED-25519 | FIPS 186-5 | | EDDSA KeyVer | A7584 | Curve - ED-25519, ED-448 | FIPS 186-5 | | EDDSA KeyVer | A7585, A7593, A7610, A7611, A7612 | Curve - ED-448 | FIPS 186-5 | | EDDSA SigGen | A7583, A7591, A7604, A7606, A7608, A7614 | Curve - ED-25519 Context Length - Context Length: 0-255 Increment 1 PreHash - Yes Pure - Yes | FIPS 186-5 | | EDDSA SigGen | A7584 | Curve - ED-25519, ED-448 Context Length - Context Length: 0-255 Increment 1 PreHash - Yes Pure - Yes | FIPS 186-5 | | EDDSA SigGen | A7585, A7593, A7610, A7611, A7612 | Curve - ED-448 Context Length - Context Length: 0-255 Increment 1 PreHash - Yes Pure - Yes | FIPS 186-5 | | EDDSA SigVer | A7583, A7591, A7604, A7606, A7608, A7614 | Curve - ED-25519 PreHash - Yes Pure - Yes | FIPS 186-5 | | EDDSA SigVer | A7584 | Curve - ED-25519, ED-448 PreHash - Yes Pure - Yes | FIPS 186-5 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 15 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |--------------------|-------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------| | EDDSA SigVer | A7585, A7593, A7610, A7611, A7612 | Curve - ED-448 PreHash - Yes Pure - Yes | FIPS 186-5 | | Hash DRBG | A7583, A7591, A7604, A7606, A7608, A7614 | Prediction Resistance - No, Yes Mode - SHA2-256, SHA2-512 | SP 800-90A Rev. 1 | | Hash DRBG | A7584 | Prediction Resistance - No, Yes Supports Reseed - Yes Mode - SHA2-256, SHA2-384, SHA2-512, SHA2-512/256, SHA3-256, SHA3-384, SHA3-512 Entropy Input - Entropy Input: 256 Nonce - Nonce: 128 Personalization String Length - Personalization String Length: 0-512 Increment 128 Additional Input - Additional Input: 0-512 Increment 128 Returned Bits - 256, 384, 512 | SP 800-90A Rev. 1 | | HMAC DRBG | A7583, A7591, A7604, A7606, A7608, A7614 | Prediction Resistance - No, Yes Mode - SHA2-256, SHA2-512 | SP 800-90A Rev. 1 | | HMAC DRBG | A7584 | Prediction Resistance - No, Yes Supports Reseed - Yes Mode - SHA2-256, SHA2-384, SHA2-512, SHA2-512/256, SHA3-256, SHA3-384, SHA3-512 Entropy Input - Entropy Input: 256 Nonce - Nonce: 128 Personalization String Length - Personalization String Length: 0-512 Increment 128 Additional Input - Additional Input: 0-512 Increment 128 Returned Bits - 256, 384, 512 | SP 800-90A Rev. 1 | | HMAC-SHA2- 256 | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | MAC - MAC: 256 Key Length - Key Length: 112-524288 Increment 8 | FIPS 198-1 | | HMAC-SHA2- 384 | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | MAC - MAC: 384 Key Length - Key Length: 112-524288 Increment 8 | FIPS 198-1 | | HMAC-SHA2- 512 | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | MAC - MAC: 512 Key Length - Key Length: 112-524288 Increment 8 | FIPS 198-1 | | HMAC-SHA2- 512/256 | A7583, A7584, A7591, A7604, | MAC - MAC: 256 Key Length - Key Length: 112-524288 Increment 8 | FIPS 198-1 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 16 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |-------------------------|-------------------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------| | | A7606, A7608, A7614 | | | | HMAC-SHA3- 256 | A7584, A7585, A7593, A7610, A7611, A7612 | MAC - MAC: 256 Key Length - Key Length: 112-524288 Increment 8 | FIPS 198-1 | | HMAC-SHA3- 384 | A7584, A7585, A7593, A7610, A7611, A7612 | MAC - MAC: 384 Key Length - Key Length: 112-524288 Increment 8 | FIPS 198-1 | | HMAC-SHA3- 512 | A7584, A7585, A7593, A7610, A7611, A7612 | MAC - MAC: 512 Key Length - Key Length: 112-524288 Increment 8 | FIPS 198-1 | | KAS-ECC-SSC Sp800-56Ar3 | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | Domain Parameter Generation Methods - P-224, P-256, P- 384, P-521 Scheme - ephemeralUnified - KAS Role - initiator, responder | SP 800-56A Rev. 3 | | KAS-FFC-SSC Sp800-56Ar3 | A7586 | Domain Parameter Generation Methods - ffdhe2048, ffdhe3072, ffdhe4096, ffdhe6144, ffdhe8192, MODP-2048, MODP-3072, MODP-4096, MODP-6144, MODP-8192 Scheme - dhEphem - KAS Role - initiator, responder | SP 800-56A Rev. 3 | | KAS-IFC-SSC | A8281 | Modulo - 2048, 3072, 4096, 6144, 8192 Key Generation Methods - rsakpg1-basic, rsakpg1-crt, rsakpg1-prime-factor, rsakpg2-basic, rsakpg2-crt, rsakpg2- prime-factor Scheme - KAS1 - KAS Role - initiator, responder KAS2 - KAS Role - initiator, responder Fixed Public Exponent - 010001 | SP 800-56A Rev. 3 | | KDA HKDF SP800-56Cr2 | A7583, A7591, A7604, A7606, A7608, A7614 | Fixed Info Pattern - uPartyInfo||vPartyInfo Fixed Info Encoding - concatenation Derived Key Length - 2048 Shared Secret Length - Shared Secret Length: 224-8192 Increment 8 HMAC Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2-512/256 Perform Multiple Expansion Tests - No Uses Hybrid Shared Secret - No | SP 800-56C Rev. 2 | | KDA HKDF SP800-56Cr2 | A7584 | Fixed Info Pattern - uPartyInfo||vPartyInfo Fixed Info Encoding - concatenation Derived Key Length - 2048 | SP 800-56C Rev. 2 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 17 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |-------------------------|------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------| | | | Shared Secret Length - Shared Secret Length: 224-8192 Increment 8 HMAC Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2-512/256, SHA3-256, SHA3-384, SHA3-512 Perform Multiple Expansion Tests - No Uses Hybrid Shared Secret - No | | | KDA HKDF SP800-56Cr2 | A7585, A7593, A7610, A7611, A7612 | Fixed Info Pattern - uPartyInfo||vPartyInfo Fixed Info Encoding - concatenation Derived Key Length - 2048 Shared Secret Length - Shared Secret Length: 224-8192 Increment 8 HMAC Algorithm - SHA3-256, SHA3-384, SHA3-512 Perform Multiple Expansion Tests - No Uses Hybrid Shared Secret - No | SP 800-56C Rev. 2 | | KDA OneStep SP800-56Cr2 | A7583, A7591, A7604, A7606, A7608, A7614 | Auxiliary Function Methods - Auxiliary Function Name - SHA2-256 Fixed Info Pattern - uPartyInfo||vPartyInfo Fixed Info Encoding - concatenation Derived Key Length - 2048 Shared Secret Length - Shared Secret Length: 224-8192 Increment 8 | SP 800-56C Rev. 2 | | KDA OneStep SP800-56Cr2 | A7584 | Auxiliary Function Methods - Auxiliary Function Name - HMAC-SHA2-256 MAC Salting Methods - default, random Fixed Info Pattern - uPartyInfo||vPartyInfo Fixed Info Encoding - concatenation Derived Key Length - 2048 Shared Secret Length - Shared Secret Length: 224-8192 Increment 8 | SP 800-56C Rev. 2 | | KDA OneStep SP800-56Cr2 | A7585, A7593, A7610, A7611, A7612 | Auxiliary Function Methods - Auxiliary Function Name - SHA3-256 Fixed Info Pattern - uPartyInfo||vPartyInfo Fixed Info Encoding - concatenation Derived Key Length - 2048 Shared Secret Length - Shared Secret Length: 224-8192 Increment 8 | SP 800-56C Rev. 2 | | KDA TwoStep SP800-56Cr2 | A7583, A7591, A7604, A7606, A7608, A7614 | MAC Salting Methods - default, random Fixed Info Pattern - uPartyInfo||vPartyInfo Fixed Info Encoding - concatenation KDF Mode - feedback MAC Modes - HMAC-SHA2-256, HMAC-SHA2-384, HMAC-SHA2-512, HMAC-SHA2-512/256 Fixed Data Order - after fixed data Counter Lengths - 8 | SP 800-56C Rev. 2 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 18 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |-------------------------|------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------| | | | The KDF supports an empty IV - Yes The KDF requires an empty IV - Yes Supported Lengths - Supported Lengths: 2048 Derived Key Length - 2048 Shared Secret Length - Shared Secret Length: 224-8192 Increment 8 Perform Multiple Expansion Tests - No Uses Hybrid Shared Secret - No | | | KDA TwoStep SP800-56Cr2 | A7584 | MAC Salting Methods - default, random Fixed Info Pattern - uPartyInfo||vPartyInfo Fixed Info Encoding - concatenation KDF Mode - feedback MAC Modes - HMAC-SHA2-256, HMAC-SHA2-384, HMAC-SHA2-512, HMAC-SHA2-512/256, HMAC-SHA3- 256, HMAC-SHA3-384, HMAC-SHA3-512 Fixed Data Order - after fixed data Counter Lengths - 8 The KDF supports an empty IV - Yes The KDF requires an empty IV - Yes Supported Lengths - Supported Lengths: 2048 Derived Key Length - 2048 Shared Secret Length - Shared Secret Length: 224-8192 Increment 8 Perform Multiple Expansion Tests - No Uses Hybrid Shared Secret - No | SP 800-56C Rev. 2 | | KDA TwoStep SP800-56Cr2 | A7585, A7593, A7610, A7611, A7612 | MAC Salting Methods - default, random Fixed Info Pattern - uPartyInfo||vPartyInfo Fixed Info Encoding - concatenation KDF Mode - feedback MAC Modes - HMAC-SHA3-256, HMAC-SHA3-384, HMAC-SHA3-512 Fixed Data Order - after fixed data Counter Lengths - 8 The KDF supports an empty IV - Yes The KDF requires an empty IV - Yes Supported Lengths - Supported Lengths: 2048 Derived Key Length - 2048 Shared Secret Length - Shared Secret Length: 224-8192 Increment 8 Perform Multiple Expansion Tests - No Uses Hybrid Shared Secret - No | SP 800-56C Rev. 2 | | KDF ANS 9.42 (CVL) | A7583, A7591, A7604, A7606, A7608, A7614 | KDF Type - DER Hash Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2- 512/256 zz Length - zz Length: 112-4096 Increment 8 | SP 800-135 Rev. 1 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 19 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |----------------------|------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------| | | | Key Data Length - Key Data Length: 112-4096 Increment 8 Supplemental Information Length - Supplemental Information Length: 0-256 Increment 8 OID - AES-128-KW, AES-192-KW, AES-256-KW | | | KDF ANS 9.42 (CVL) | A7584 | KDF Type - DER Hash Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2- 512/256, SHA3-256, SHA3-384, SHA3-512 zz Length - zz Length: 112-4096 Increment 8 Key Data Length - Key Data Length: 112-4096 Increment 8 Supplemental Information Length - Supplemental Information Length: 0-256 Increment 8 OID - AES-128-KW, AES-192-KW, AES-256-KW | SP 800-135 Rev. 1 | | KDF ANS 9.42 (CVL) | A7585, A7593, A7610, A7611, A7612 | KDF Type - DER Hash Algorithm - SHA3-256, SHA3-384, SHA3-512 zz Length - zz Length: 112-4096 Increment 8 Key Data Length - Key Data Length: 112-4096 Increment 8 Supplemental Information Length - Supplemental Information Length: 0-256 Increment 8 OID - AES-128-KW, AES-192-KW, AES-256-KW | SP 800-135 Rev. 1 | | KDF ANS 9.63 (CVL) | A7583, A7591, A7604, A7606, A7608, A7614 | Hash Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2- 512/256 Field Size - 224, 571 Shared Info Length - Shared Info Length: 0-1024 Increment 8 Key Data Length - Key Data Length: 128-4096 Increment 8 | SP 800-135 Rev. 1 | | KDF ANS 9.63 (CVL) | A7584 | Hash Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2- 512/256, SHA3-256, SHA3-384, SHA3-512 Field Size - 224, 571 Shared Info Length - Shared Info Length: 0-1024 Increment 8 Key Data Length - Key Data Length: 128-4096 Increment 8 | SP 800-135 Rev. 1 | | KDF ANS 9.63 (CVL) | A7585, A7593, A7610, A7611, A7612 | Hash Algorithm - SHA3-256, SHA3-384, SHA3-512 Field Size - 224, 571 Shared Info Length - Shared Info Length: 0-1024 Increment 8 Key Data Length - Key Data Length: 128-4096 Increment 8 | SP 800-135 Rev. 1 | | KDF KMAC Sp800-108r1 | A7584, A7585, A7593, A7610, A7611, A7612 | Key Derivation Key Length - Key Derivation Key Length: 128 Context Length - Context Length: 128 Label Length - Label Length: 128 Derived Key Length - Derived Key Length: 256 MAC Modes - KMAC-128, KMAC-256 | SP 800-108 Rev. 1 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 20 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |---------------|---------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------| | KDF SP800-108 | A7579, A7587, A7588, A7594, A7595, A7613 | KDF Mode - Counter, Feedback MAC Mode - CMAC-AES128, CMAC-AES192, CMAC- AES256 Supported Lengths - Supported Lengths: 112-4096 Increment 8 Fixed Data Order - Before Fixed Data Counter Length - 32 Supports Empty IV - Yes Requires Empty IV - No Custom Key In Length - 0 | SP 800-108 Rev. 1 | | KDF SP800-108 | A7583, A7591, A7604, A7606, A7608, A7614 | KDF Mode - Counter, Feedback MAC Mode - HMAC-SHA2-256, HMAC-SHA2-384, HMAC-SHA2-512, HMAC-SHA2-512/256 Supported Lengths - Supported Lengths: 112-4096 Increment 8 Fixed Data Order - Before Fixed Data Counter Length - 32 Supports Empty IV - Yes Requires Empty IV - No Custom Key In Length - 0 | SP 800-108 Rev. 1 | | KDF SP800-108 | A7584 | KDF Mode - Counter, Feedback MAC Mode - HMAC-SHA2-256, HMAC-SHA2-384, HMAC-SHA2-512, HMAC-SHA2-512/256, HMAC-SHA3- 256, HMAC-SHA3-384, HMAC-SHA3-512 Supported Lengths - Supported Lengths: 112-4096 Increment 8 Fixed Data Order - Before Fixed Data Counter Length - 32 Supports Empty IV - Yes Requires Empty IV - No Custom Key In Length - 0 | SP 800-108 Rev. 1 | | KDF SP800-108 | A7585, A7593, A7610, A7611, A7612 | KDF Mode - Counter, Feedback MAC Mode - HMAC-SHA3-256, HMAC-SHA3-384, HMAC-SHA3-512 Supported Lengths - Supported Lengths: 112-4096 Increment 8 Fixed Data Order - Before Fixed Data Counter Length - 32 Supports Empty IV - Yes Requires Empty IV - No | SP 800-108 Rev. 1 | | KDF SSH (CVL) | A7583, A7584, A7591, A7592, A7604, A7605, A7606, A7607, | Custom Key In Length - 0 Cipher - AES-128, AES-192, AES-256, TDES Hash Algorithm - SHA2-256, SHA2-384, SHA2-512 | SP 800-135 Rev. 1 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 21 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |-------------|------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------| | | A7608, A7609, A7614, A7615 | | | | KMAC-128 | A7584, A7585, A7593, A7610, A7611, A7612 | Message Length - Message Length: 0-65536 Increment 8 MAC Length - MAC Length: 32-65536 Increment 8 Key Data Length - Key Data Length: 128-1024 Increment 8 Hex Customization - Yes Supports eXtendable-Output Functions - No, Yes | SP 800-185 | | KMAC-256 | A7584, A7585, A7593, A7610, A7611, A7612 | Message Length - Message Length: 0-65536 Increment 8 MAC Length - MAC Length: 32-65536 Increment 8 Key Data Length - Key Data Length: 128-1024 Increment 8 Hex Customization - Yes Supports eXtendable-Output Functions - No, Yes | SP 800-185 | | KTS-IFC | A7583, A7591, A7604, A7606, A7608, A7614 | Function - keyPairGen, partialVal IUT ID - 0123456789abcdef Modulo - 2048, 3072, 4096, 6144, 8192 Key Generation Methods - rsakpg1-basic, rsakpg1-crt, rsakpg1-prime-factor, rsakpg2-basic, rsakpg2-crt, rsakpg2- prime-factor Fixed Public Exponent - 010001 Scheme - KTS-OAEP-basic - KAS Role - initiator, responder Key Transport Method - Hash Algorithms - SHA2-256, SHA2-384, SHA2-512, SHA2-512/256, SHA3-256, SHA3-384, SHA3-512 Supports Null Associated Data - Yes Associated Data Pattern - uPartyInfo||vPartyInfo Associated Data Encoding - concatenation Key Length - 768 | SP 800-56B Rev. 2 | | KTS-IFC | A7584 | Function - keyPairGen, partialVal IUT ID - 0123456789abcdef Modulo - 2048, 3072, 4096, 6144, 8192 Key Generation Methods - rsakpg1-basic, rsakpg1-crt, rsakpg1-prime-factor, rsakpg2-basic, rsakpg2-crt, rsakpg2- prime-factor Fixed Public Exponent - 010001 Scheme - KTS-OAEP-basic - KAS Role - initiator, responder Key Transport Method - Hash Algorithms - SHA2-256 Supports Null Associated Data - Yes Associated Data Pattern - uPartyInfo||vPartyInfo Associated Data Encoding - concatenation Key Length - 768 | SP 800-56B Rev. 2 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 22 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |------------------------|-------------------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------| | ML-DSA KeyGen | A7584, A7585, A7593, A7610, A7611, A7612 | Parameter Sets - ML-DSA-44, ML-DSA-65, ML-DSA-87 | FIPS 204 | | ML-DSA SigGen | A7584, A7585, A7593, A7610, A7611, A7612 | Signature Interfaces - external, internal Pre Hash - pure Deterministic - No, Yes External Mu - No, Yes Parameter Sets - ML-DSA-44, ML-DSA-65, ML-DSA-87 Message Length - Message Length: 8-65536 Increment 8 Context Length - Context Length: 0-248 Increment 8 | FIPS 204 | | ML-DSA SigVer | A7584, A7585, A7593, A7610, A7611, A7612 | Signature Interfaces - external, internal Pre Hash - pure External Mu - No, Yes Parameter Sets - ML-DSA-44, ML-DSA-65, ML-DSA-87 Message Length - Message Length: 8-65536 Increment 8 Context Length - Context Length: 0-248 Increment 8 | FIPS 204 | | ML-KEM EncapDecap | A7584, A7585, A7593, A7610, A7611, A7612 | Parameter Sets - ML-KEM-1024, ML-KEM-512, ML-KEM- 768 Functions - Decapsulation, Decapsulation Key Check, Encapsulation, Encapsulation Key Check | FIPS 203 | | ML-KEM KeyGen | A7584, A7585, A7593, A7610, A7611, A7612 | Parameter Sets - ML-KEM-1024, ML-KEM-512, ML-KEM- 768 | FIPS 203 | | PBKDF | A7583, A7591, A7604, A7606, A7608, A7614 | Iteration Count - Iteration Count: 1000-10000 Increment 1 HMAC Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2-512/256 Password Length - Password Length: 8-128 Increment 1 Salt Length - Salt Length: 128-4096 Increment 8 Key Data Length - Key Data Length: 112-4096 Increment 8 | SP 800-132 | | PBKDF | A7584 | Iteration Count - Iteration Count: 1000-10000 Increment 1 HMAC Algorithm - SHA2-256, SHA2-384, SHA2-512, SHA2-512/256, SHA3-256, SHA3-384, SHA3-512 Password Length - Password Length: 8-128 Increment 1 Salt Length - Salt Length: 128-4096 Increment 8 Key Data Length - Key Data Length: 112-4096 Increment 8 | SP 800-132 | | PBKDF | A7585, A7593, A7610, A7611, A7612 | Iteration Count - Iteration Count: 1000-10000 Increment 1 HMAC Algorithm - SHA3-256, SHA3-384, SHA3-512 Password Length - Password Length: 8-128 Increment 1 Salt Length - Salt Length: 128-4096 Increment 8 Key Data Length - Key Data Length: 112-4096 Increment 8 | SP 800-132 | | RSA KeyGen (FIPS186-5) | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | Key Generation Mode - probableWithProbableAux Modulo - 2048, 3072, 4096, 6144, 8192 p mod 8 - 0 Primality Tests - 2powSecStr | FIPS 186-5 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 23 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |------------------------------|-------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------|-------------------| | | | q mod 8 - 0 Info Generated By Server - Yes Private Key Format - standard Public Exponent Mode - random | | | RSA SigGen (FIPS186-5) | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | Hash Pair - Hash Algorithm - SHA2-256 Modulo - 2048, 3072, 4096 Signature Type - pkcs1v1.5, pss Mask Function - mgf1 | FIPS 186-5 | | RSA SigGen (FIPS186-5) | A7585, A7593, A7610, A7611, A7612 | Hash Pair - Hash Algorithm - SHA3-256 Modulo - 2048, 3072, 4096 Signature Type - pkcs1v1.5, pss Mask Function - mgf1 | FIPS 186-5 | | RSA SigVer (FIPS186-4) | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | Signature Type - ANSI X9.31, PKCS 1.5, PKCSPSS Modulo - 1024, 2048, 3072, 4096 Hash Pair - Hash Algorithm - SHA2-256 Public Exponent Mode - Random | FIPS 186-4 | | RSA SigVer (FIPS186-5) | A7584, A7591, A7604, A7606, A7608, A7614 | Hash Pair - Hash Algorithm - SHA2-256 Modulo - 2048, 3072, 4096 Signature Type - pkcs1v1.5, pss Mask Function - mgf1 Public Exponent Mode - random | FIPS 186-5 | | RSA SigVer (FIPS186-5) | A7585, A7593, A7610, A7611, A7612 | Hash Pair - Hash Algorithm - SHA3-256 Modulo - 2048, 3072, 4096 Signature Type - pkcs1v1.5, pss Mask Function - mgf1 Public Exponent Mode - random | FIPS 186-5 | | Safe Primes Key Generation | A7586 | Safe Prime Groups - ffdhe2048, ffdhe3072, ffdhe4096, ffdhe6144, ffdhe8192, MODP-2048, MODP-3072, MODP- 4096, MODP-6144, MODP-8192 | SP 800-56A Rev. 3 | | Safe Primes Key Verification | A7586 | Safe Prime Groups - ffdhe2048, ffdhe3072, ffdhe4096, ffdhe6144, ffdhe8192, MODP-2048, MODP-3072, MODP- 4096, MODP-6144, MODP-8192 | SP 800-56A Rev. 3 | | SHA2-256 | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | Message Length - Message Length: 0-65536 Increment 8 Large Message Sizes - 1, 2, 4, 8 | FIPS 180-4 | | SHA2-384 | A7583, A7584, A7591, A7604, | Message Length - Message Length: 0-65536 Increment 8 Large Message Sizes - 1, 2, 4, 8 | FIPS 180-4 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 24 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm | CAVP Cert | Properties | Reference | |----------------|------------------------------------------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------| | | A7606, A7608, A7614 | | | | SHA2-512 | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | Message Length - Message Length: 0-65536 Increment 8 Large Message Sizes - 1, 2, 4, 8 | FIPS 180-4 | | SHA2-512/256 | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | Message Length - Message Length: 0-65536 Increment 8 Large Message Sizes - 1, 2, 4, 8 | FIPS 180-4 | | SHA3-256 | A7584, A7585, A7593, A7610, A7611, A7612 | Message Length - Message Length: 0-65536 Increment 8 Large Message Sizes - 1, 2, 4, 8 | FIPS 202 | | SHA3-384 | A7584, A7585, A7593, A7610, A7611, A7612 | Message Length - Message Length: 0-65536 Increment 8 Large Message Sizes - 1, 2, 4, 8 | FIPS 202 | | SHA3-512 | A7584, A7585, A7593, A7610, A7611, A7612 | Message Length - Message Length: 0-65536 Increment 8 Large Message Sizes - 1, 2, 4, 8 | FIPS 202 | | SHAKE-128 | A7584, A7585, A7593, A7610, A7611, A7612 | Supports Bit-Oriented Messages - No Supports Empty Message - Yes Supports Bit-Oriented Output - No Output Length - Output Length: 16-65536 Increment 8 | FIPS 202 | | SHAKE-256 | A7584, A7585, A7593, A7610, A7611, A7612 | Supports Bit-Oriented Messages - No Supports Empty Message - Yes Supports Bit-Oriented Output - No Output Length - Output Length: 16-65536 Increment 8 | FIPS 202 | | SLH-DSA KeyGen | A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614 | Parameter Sets - SLH-DSA-SHA2-128f, SLH-DSA-SHA2- 128s, SLH-DSA-SHA2-192f, SLH-DSA-SHA2-192s, SLH- DSA-SHA2-256f, SLH-DSA-SHA2-256s, SLH-DSA-SHAKE- 128f, SLH-DSA-SHAKE-128s, SLH-DSA-SHAKE-192f, SLH-DSA-SHAKE-192s, SLH-DSA-SHAKE-256f, SLH-DSA- SHAKE-256s | FIPS 205 | | SLH-DSA SigGen | A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614 | Deterministic - No, Yes Signature Interfaces - external, internal Pre Hash - pure Parameter Sets - SLH-DSA-SHA2-128f, SLH-DSA-SHA2- 128s, SLH-DSA-SHA2-192f, SLH-DSA-SHA2-192s, SLH- DSA-SHA2-256f, SLH-DSA-SHA2-256s, SLH-DSA-SHAKE- 128f, SLH-DSA-SHAKE-128s, SLH-DSA-SHAKE-192f, SLH-DSA-SHAKE-192s, SLH-DSA-SHAKE-256f, SLH-DSA- SHAKE-256s | FIPS 205 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 25 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 6: Approved Algorithms | Algorithm | CAVP Cert | Properties | Reference | |----------------------------|------------------------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------| | | | Message Length - Message Length: 8-65536 Increment 8 Context Length - Context Length: 0-248 Increment 8 | | | SLH-DSA SigVer | A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614 | Signature Interfaces - external, internal Pre Hash - pure Parameter Sets - SLH-DSA-SHA2-128f, SLH-DSA-SHA2- 128s, SLH-DSA-SHA2-192f, SLH-DSA-SHA2-192s, SLH- DSA-SHA2-256f, SLH-DSA-SHA2-256s, SLH-DSA-SHAKE- 128f, SLH-DSA-SHAKE-128s, SLH-DSA-SHAKE-192f, SLH-DSA-SHAKE-192s, SLH-DSA-SHAKE-256f, SLH-DSA- SHAKE-256s Message Length - Message Length: 8-65536 Increment 8 Context Length - Context Length: 0-248 Increment 8 | FIPS 205 | | TLS v1.2 KDF RFC7627 (CVL) | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | Hash Algorithm - SHA2-256, SHA2-384, SHA2-512 Key Block Length - Key Block Length: 1024 | SP 800-135 Rev. 1 | | TLS v1.3 KDF (CVL) | A7583, A7584, A7591, A7604, A7606, A7608, A7614 | HMAC Algorithm - SHA2-256, SHA2-384 KDF Running Modes - DHE, PSK, PSK-DHE | SP 800-135 Rev. 1 | ##### Vendor-Affirmed Algorithms: Table 7: Vendor-Affirmed Algorithms | Name | Properties | Implementation | Reference | |-----------------------------------------------|---------------------|------------------|---------------------------------------------------------| | Asymmetric Cryptographic Key Generation (CKG) | Key Type:Asymmetric | N/A | SP 800-133r2, section 4, direct DRBG output without XOR | ##### Non-Approved, Allowed Algorithms: N/A for this module. ##### Non-Approved, Allowed Algorithms with No Security Claimed: Table 8: Non-Approved, Allowed Algorithms with No Security Claimed | Name | Caveat | Use and Function | |----------------------------------|--------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------| | X25519 shared secret computation | No security claimed, compliant with IG D.S Scenario 2 and IG 2.4.A | Provides 128 bits of security, Key Agreement; used only in the context of hybrid ML-KEM and X25519 | | X25519 KeyGen | No security claimed, compliant with IG D.S Scenario 2 and IG 2.4.A | Provides 128 bits of security, Key Generation; used only in the context of hybrid ML-KEM and X25519 | ##### Non-Approved, Not Allowed Algorithms: © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 26 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 9: Non-Approved, Not Allowed Algorithms | Name | Use and Function | |---------------------------------------------------------------------------------------------------------------------------------------------|-------------------------------------| | AES GCM encryption with external IV | Encryption | | HMAC with key length < 112 bits | Message Authentication Code | | KMAC with key length < 112 bits or tag length < 32 bits | Message Authentication Code | | PBKDF2 with password length < 8 characters or salt length < 128 bits or output key length < 112 bits or iteration count < 1000 | Key Derivation Function | | TLS 1.2 KDF without extended master secret or with SHA2-512/256 or with SHA-3 functions or with input secret length < 112 bits | Key Derivation Function | | KBKDF with input key length < 112 bits | Key Derivation Function | | Hash_DRBG or HMAC_DRBG with SHA2-384 or SHA2-512/256 or SHA-3 functions or KMAC | Deterministic Random Bit Generation | | ECDH with P-192 | Shared Secret Computation | | RSA SigGen with X9.31 padding or with modulus length < 2048 bits or with PSS salt length > digest length or without hashing (primitive) | Digital Signature Generation | | RSA SigVer with modulus length < 2048 bits or with PSS salt length > digest length or without hashing (primitive) | Digital Signature Verification | | ECDSA SigGen with P-192 or with SHA2-512/256; ECDSA deterministic SigGen with P-192 or with SHA2-512/256; ECDSA SigGen component with P-192 | Digital Signature Generation | | ECDSA SigVer with SHA2-512/256; ECDSA SigVer component | Digital Signature Verification | | ECDSA KeyGen with P-192 | Key Pair Generation | | ML-KEM encapsulation with user-provided randomness | Key Encapsulation | | SSH KDF with SHA2-512/256 or with SHA-3 functions or with input secret length < 112 bits | Key Derivation Function | | TLS 1.3 KDF with SHA2-512 or SHA2-512/256 or SHA-3 functions or input secret length < 112 bits | Key Derivation Function | | One step KDF, two step KDF, HKDF, ANS X9.42 KDF, ANS X9.63 KDF with input secret length < 112 bits | Key Derivation Function | ### 2.6 Security Function Implementations | Name | Type | Description | Properties | Algorithms | |---------------------|-----------|---------------------------------------|--------------|------------------------------------------------------------------------------------| | Encryption with AES | BC-UnAuth | SP 800-38A and SP 800-38E. Encryption | | AES-CBC-CS1: (A7579, A7587, A7588, A7594, A7595, A7613) AES-CFB128: (A7579, A7587, | This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 27 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |---------------------|-----------|---------------------------------------|--------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7588, A7594, A7595, A8282, A7613) AES-CBC-CS2: (A7579, A7587, A7588, A7594, A7595, A7613) AES-CFB1: (A7579, A7587, A7588, A7594, A7595, A7613) AES-OFB: (A7579, A7587, A7588, A7594, A7595, A7613) AES-CBC-CS3: (A7579, A7587, A7588, A7594, A7595, A7613) AES-XTS Testing Revision 2.0: (A7579, A7587, A7588, A7594, A7595, A7596, A7613) AES-CTR: (A7579, A7587, A7588, A7594, A7595, A7613) AES-CBC: (A7579, A7587, A7588, A7594, A7595, A7613) AES-CFB8: (A7579, A7587, A7588, A7594, A7595, | | Decryption with AES | BC-UnAuth | SP 800-38A and SP 800-38E. Decryption | | A7613) AES-CBC-CS1: (A7579, A7587, A7588, A7594, A7595, A7613) AES-CFB128: (A7579, A7587, A7588, A7594, A7595, A8282, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 28 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |-----------------------------------|---------|--------------------------------------|--------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7613) AES-CBC-CS2: (A7579, A7587, A7588, A7594, A7595, A7613) AES-CFB1: (A7579, A7587, A7588, A7594, A7595, A7613) AES-OFB: (A7579, A7587, A7588, A7594, A7595, A7613) AES-CBC-CS3: (A7579, A7587, A7588, A7594, A7595, A7613) AES-XTS Testing Revision 2.0: (A7579, A7587, A7588, A7594, A7595, A7596, A7613) AES-CTR: (A7579, A7587, A7588, A7594, A7595, A7613) AES-CBC: (A7579, A7587, A7588, A7594, A7595, A7613) AES-CFB8: (A7579, A7587, A7588, A7594, A7595, | | Authenticated Encryption with AES | BC-Auth | SP 800-38D. Authenticated encryption | | A7613) AES-CCM: (A7579, A7587, A7588, A7594, A7595, A7613) AES-GCM: (A7580, A7581, A7582, A7589, A7590, A7596, A7597, A7598, A7599, A7600, A7601, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 29 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |---------------------------------------------|---------|-------------------------------------------------------------|--------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7602, A7603) AES-KW: (A7579, A7587, A7588, A7594, A7595, A7613) AES-KWP: (A7579, A7587, A7588, A7594, A7595, A7613) | | Authenticated Decryption with AES | BC-Auth | SP 800-38D. Authenticated decryption | | AES-CCM: (A7579, A7587, A7588, A7594, A7595, A7613) AES-GCM: (A7580, A7581, A7582, A7589, A7590, A7596, A7597, A7598, A7599, A7600, A7601, A7602, A7603) AES-KW: (A7579, A7587, A7588, A7594, A7595, A7613) AES-KWP: (A7579, A7588, A7587, A7594, A7595, | | Message Authentication Generation with AES | MAC | SP 800-38B and SP 800-38D Message authentication generation | | A7613) AES-GMAC: (A7580, A7581, A7582, A7589, A7590, A7596, A7597, A7598, A7599, A7600, A7601, A7602, A7603, A7584) AES-CMAC: (A7579, A7587, A7588, A7594, A7595, A7613) | | Message Authentication Generation with HMAC | MAC | FIPS 198-1. Message authentication generation | | HMAC-SHA2- 512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 30 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms A7584, A7591, | |--------|--------|---------------|--------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) HMAC-SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-256: (A7583, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 31 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties Algorithms | |---------------------------------------------|--------|-----------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | A7604, A7606, A7608, A7614) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) | | Message Authentication Generation with KMAC | MAC | SP 800-185. Message authentication generation | KMAC-256: (A7585, A7593, A7610, A7611, A7612, A7584) KMAC-128: (A7585, A7593, A7610, A7611, A7612, A7584) | | Random Number Generation with DRBG | DRBG | SP 800-90ARev1. Random number generation | HMAC DRBG: (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) HMAC-SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) HMAC-SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) Counter DRBG: (A7579, A7587, A7588, A7594, A7595, A7613) Hash DRBG: (A7583, A7584, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 32 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |---------------------------------|---------------|----------------------------------|--------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) AES-ECB: (A7579, A7613, A7595, A7594, A7588, A7587) | | Signature Generation with ECDSA | DigSig-SigGen | FIPS 186-5. Signature generation | | SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) ECDSA SigGen (FIPS186-5): (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 33 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |-------------------------------|---------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | Deterministic ECDSA SigGen (FIPS186-5): (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, | | Signature Generation with RSA | DigSig-SigGen | FIPS 186-5. Signature generation. Per IG C.F, RSA SigGen was CAVP tested with moduli sizes 2048, 3072, 4096 bits. The module supports moduli sizes larger than 4096 bits, up to 16384 bits. | | A7612, A7614) SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) RSA SigGen (FIPS186-5): (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 34 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |--------------------------------------------|---------------|------------------------------------|--------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Signature Verification with ECDSA | DigSig-SigVer | FIPS 186-5. Signature verification | | A7606, A7608, A7614, A7584) SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) ECDSA SigVer (FIPS186-5): (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) | | Signature Verification with ECDSA (Legacy) | DigSig-SigVer | FIPS 186-4. Signature verification | | SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 35 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |---------------------------------|---------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7614, A7584) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) ECDSA SigVer (FIPS186-4): (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, | | Signature Verification with RSA | DigSig-SigVer | FIPS 186-5. Signature verification. Per IG C.F, RSA SigVer was CAVP tested with moduli sizes 2048, 3072, 4096 bits. The module supports moduli sizes larger than 4096 bits, up to 16384 bits. | | A7612, A7614) SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) RSA SigVer (FIPS186-5): (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 36 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties Algorithms | |------------------------------------------|-------------------------|------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | A7612, A7614) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) | | Signature Verification with RSA (Legacy) | DigSig-SigVer | FIPS 186-4. Signature verification | SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) RSA SigVer (FIPS186-4): (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA3-384: (A7584) SHA3-512: (A7584) | | Key Pair Generation with ECDSA | AsymKeyPair- KeyGen CKG | FIPS 186-5. Key pair generation | ECDSA KeyGen (FIPS186-5): (A7583, A7591, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 37 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms A7604, A7606, A7608, A7614, | |----------------------------------------|-------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Key Pair Generation with RSA | AsymKeyPair- KeyGen CKG | FIPS 186-5. Key pair generation. Per IG C.F, RSA KeyGen was CAVP tested with moduli sizes of 2048, 3072, 4096, 6144, 8192 bits. The module supports moduli sizes larger than 8192 bits, up to 16384 bits. The number of Miller-Rabin tests is compliant with Table B.1 of FIPS 186-5. | | A7584) RSA KeyGen (FIPS186-5): (A7583, A7591, A7604, A7606, A7608, A7614, A7584) | | Key Pair Generation with Safe Primes | AsymKeyPair- KeyGen CKG | SP 800-56Ar3. Key pair generation | | Safe Primes Key Generation: (A7586) | | Public Key Verification with ECDSA | AsymKeyPair- PubKeyVal | FIPS 186-5. Key verification | | ECDSA KeyVer (FIPS186-5): (A7583, A7591, A7604, A7606, A7608, A7614, A7584) ECDSA KeyVer (FIPS186-4): (A7583, A7591, A7604, A7606, A7608, A7614, A7584) | | Key Pair Verification with Safe Primes | AsymKeyPair- KeyVer | SP 800-56Ar3. Key pair verification | | Safe Primes Key Verification: (A7586) | | Key Derivation with KBKDF | KBKDF | SP 800-108r1. Key derivation | | KDF KMAC Sp800- 108r1: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) KDF SP800-108: (A7579, A7583, A7584, A7585, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 38 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Algorithms A7610, A7611, | |--------|--------|---------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | Properties | A7587, A7588, A7591, A7593, A7594, A7595, A7604, A7606, A7608, A7610, A7611, A7612, A7613, A7614) SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) KMAC-256: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA2- 512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA3-384: (A7585, A7593, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 39 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |---------------------------------|------------|------------------------------|--------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7612, A7584) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) KMAC-128: (A7585, A7593, | | Key Derivation with KDA OneStep | KAS-56CKDF | SP 800-56Cr2. Key derivation | | A7610, A7611, A7612, A7584) HMAC-SHA2- 512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-512: (A7585, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 40 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |--------|--------|---------------|--------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7593, A7610, A7611, A7612, A7584) HMAC-SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) HMAC-SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) KDA OneStep SP800-56Cr2: (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) HMAC-SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) KMAC-256: | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 41 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |---------------------------------|------------|------------------------------|--------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | (A7585, A7593, A7610, A7611, A7612) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) KMAC-128: (A7585, A7593, A7610, A7611, A7612) | | Key Derivation with KDA TwoStep | KAS-56CKDF | SP 800-56Cr2. Key derivation | | HMAC-SHA2- 512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) KDA TwoStep SP800-56Cr2: (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) HMAC-SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) HMAC-SHA2-512: (A7583, A7591, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 42 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |------------------------------|------------|------------------------------|--------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7604, A7606, A7608, A7614, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-512: (A7585, A7593, A7610, A7611, A7612, | | Key Derivation with KDA HKDF | KAS-56CKDF | SP 800-56Cr2. Key derivation | | A7584) KDA HKDF SP800- 56Cr2: (A7583, A7584, A7585, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614, A7591) HMAC-SHA2-256: (A7583, A7584, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 43 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms A7611, A7612, | |--------|--------|---------------|--------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7591, A7604, A7606, A7608, A7614) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA2- 512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-512: (A7585, A7593, A7610, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 44 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties Algorithms | |-----------------------------------|------------|------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | A7584) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) | | Key Derivation with ANS X9.42 KDF | KAS-135KDF | SP 800-135r1. Key derivation | KDF ANS 9.42: (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 45 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms SHA2-384: (A7583, A7591, A7604, A7606, A7608, | |-------------------------------|------------|------------------------------|--------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Key Derivation with X9.63 KDF | KAS-135KDF | SP 800-135r1. Key derivation | | A7614, A7584) KDF ANS 9.63: (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) | | Key Derivation with SSH KDF | KAS-135KDF | SP 800-135r1. Key derivation | | SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-384: (A7583, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 46 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |---------------------------------|------------|------------------------------|--------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7591, A7604, A7606, A7608, A7614, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) KDF SSH: (A7583, A7584, A7591, A7592, A7604, A7605, A7606, A7607, A7608, A7609, A7614, | | Key Derivation with TLS 1.2 KDF | KAS-135KDF | SP 800-135r1. Key derivation | | A7615) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) TLS v1.2 KDF RFC7627: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) | | Key Derivation with TLS 1.3 KDF | KAS-135KDF | RFC 8446. Key derivation | | TLS v1.3 KDF: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 47 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |----------------------------|--------|----------------------------|--------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Key Derivation with PBKDF2 | PBKDF | SP 800-132. Key derivation | | PBKDF: (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) HMAC-SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA2- 512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) HMAC-SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) HMAC-SHA3-384: (A7585, A7593, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 48 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |---------------------------|---------|-------------------------------------------|--------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7610, A7611, A7612, A7584) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, | | Shared Secret Computation | KAS-SSC | SP 800-56Ar3. KAS-ECC-SSC and KAS-FFC-SSC | | A7614, A7584) KAS-FFC-SSC Sp800-56Ar3: (A7586) KAS-ECC-SSC Sp800-56Ar3: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) KAS-IFC-SSC: (A8281) | | Message Digest with SHA | SHA | FIPS 180-4 and FIPS 202. Message digest | | SHA3-384: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-512/256: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA3-512: (A7585, A7593, A7610, A7611, A7612, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 49 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |----------------------------|-------------------------|--------------------------|--------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHA2-384: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) | | Message Digest with SHAKE | XOF | FIPS 202. Message digest | | SHAKE-128: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-256: (A7585, A7593, A7610, A7611, A7612, A7584) | | Key Generation with ML-KEM | AsymKeyPair- KeyGen CKG | FIPS 203. Key generation | | ML-KEM KeyGen: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-128: (A7584, A7585, A7593, A7610, A7611, A7612) | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 50 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |-------------------------------|-------------------------|-----------------------------|----------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Key Encapsulation with ML-KEM | KEM-Encap | FIPS 203. Key encapsulation | IG:IG D.S Scenario 1 | ML-KEM EncapDecap: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-128: (A7584, A7585, A7593, A7610, | | Key Decapsulation with ML-KEM | KEM-Decap | FIPS 203. Key decapsulation | IG:IG D.S Scenario 1 | A7611, A7612) ML-KEM EncapDecap: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-128: (A7584, A7585, A7593, A7610, A7611, A7612) | | Key Generation with ML-DSA | AsymKeyPair- KeyGen CKG | FIPS 204. Key generation | | ML-DSA KeyGen: (A7585, A7593, A7610, A7611, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 51 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |------------------------------------|-------------------------|----------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7612, A7584) SHAKE-128: (A7584, A7585, A7593, A7610, A7611, A7612) SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) | | Signature Generation with ML-DSA | DigSig-SigGen | FIPS 204. Signature generation | Signature interfaces:The external and internal interfaces are supported Deterministic:Both the deterministic and hedged variants are supported External mu:Both the external and internal mu computations are supported | ML-DSA SigGen: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-128: (A7584, A7585, A7593, A7610, A7611, A7612) SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) | | Signature Verification with ML-DSA | DigSig-SigVer | FIPS 204. Signature verification | Signature interfaces:The external and internal interfaces are supported External mu:Both the external and internal mu computations are supported | ML-DSA SigVer: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-128: (A7584, A7585, A7593, A7610, A7611, A7612) SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) | | Key Generation with SLH-DSA | AsymKeyPair- KeyGen CKG | FIPS 205. Key generation | | SLH-DSA KeyGen: (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 52 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |-------------------------------------|---------------|----------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614) | | Signature Generation with SLH-DSA | DigSig-SigGen | FIPS 205. Signature generation | Signature interfaces:The external and internal interfaces are supported Deterministic:Both the deterministic and hedged variants are supported | SLH-DSA SigGen: (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) HMAC-SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) HMAC-SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614) | | Signature Verification with SLH-DSA | DigSig-SigVer | FIPS 205. Signature verification | Signature interfaces:The external and internal interfaces are supported | SLH-DSA SigVer: (A7583, A7584, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614) SHAKE-256: (A7584, A7585, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 53 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |---------------------------------------------|----------------------|------------------------------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | A7593, A7610, A7611, A7612) SHA2-256: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614) | | Key Encapsulation with KEM- Hybrid-MLX- KEM | KEM-Hybrid KEM-Encap | FIPS 203. Key encapsulation using X25519MLKEM768 per SP 800- 227 | IG:IG D.S Scenario 2 CAVP Testing Option 1 Key Combiner:N/A: the approved HKDF key combiner is offered as a separate SFI/Service Non-ML- KEM:X25519, non- approved with no security claimed per IG 2.4.A | ML-KEM EncapDecap: (A7585, A7593, A7610, A7611, A7612) X25519 shared secret computation: () SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-128: (A7584, A7585, A7593, A7610, A7611, A7612) | | Key Encapsulation with Hybrid- ML-KEM- ECDH | KEM-Hybrid KEM-Encap | FIPS 203 and SP 800-56Ar3. Key encapsulation using SecP256r1MLKEM768 and SecP384r1MLKEM1024 per SP 800-227 | IG:IG D.S Scenario 2 CAVP Testing Option 1 Key Combiner:N/A: the approved HKDF key combiner is offered as a separate SFI/Service Non-ML-KEM:KAS- ECC-SSC, approved per IG D.F Scenario 2 | ML-KEM EncapDecap: (A7585, A7593, A7610, A7611, A7612) KAS-ECC-SSC Sp800-56Ar3: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 54 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |---------------------------------------------|----------------------|------------------------------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-128: (A7584, A7585, A7593, A7610, | | Key Decapsulation with KEM- Hybrid-MLX- KEM | KEM-Hybrid KEM-Decap | FIPS 203. Key decapsulation using X25519MLKEM768 per SP 800- 227 | IG:IG D.S Scenario 2 CAVP Testing Option 1 Key Combiner:N/A: the approved HKDF key combiner is offered as a separate SFI/Service Non-ML- KEM:X25519, non- approved with no security claimed per IG 2.4.A | A7611, A7612) ML-KEM EncapDecap: (A7585, A7593, A7610, A7611, A7612) X25519 shared secret computation: () SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-128: (A7584, A7585, A7593, A7610, | | Key Decapsulation with Hybrid- ML-KEM- ECDH | KEM-Hybrid KEM-Decap | FIPS 203 and SP 800-56Ar3. Key decapsulation using SecP256r1MLKEM768 and SecP384r1MLKEM1024 per SP 800-227 | IG:IG D.S Scenario 2 CAVP Testing Option 1 Key Combiner:N/A: the approved HKDF | A7611, A7612) ML-KEM EncapDecap: (A7585, A7593, A7610, A7611, A7612) | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 55 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |------------------------------------------|-------------------------|---------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | key combiner is offered as a separate SFI/Service Non-ML-KEM:KAS- ECC-SSC, approved per IG D.F Scenario 2 | KAS-ECC-SSC Sp800-56Ar3: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-128: (A7584, A7585, A7593, A7610, A7611, A7612) | | Key Generation with KEM- Hybrid-MLX- KEM | AsymKeyPair- KeyGen CKG | FIPS 203. Key generation of X25519MLKEM768 key pairs per SP 800-227 | | ML-KEM KeyGen: (A7585, A7593, A7610, A7611, A7612) X25519 KeyGen: () SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-128: (A7584, A7585, A7593, A7610, A7611, A7612) ML-KEM KeyGen: | | Key Generation with Hybrid- | AsymKeyPair- KeyGen | FIPS 203 and SP 800-56Ar3. Key generation of | | (A7585, A7593, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 56 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |----------------------------------------------|--------------------------------------------|-------------------------------------------------------------------|--------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | ML-KEM- ECDH | | SecP256r1MLKEM768 and SecP384r1MLKEM1024 key pairs per SP 800-227 | | A7610, A7611, A7612) ECDSA KeyGen (FIPS186-5): (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHAKE-256: (A7584, A7585, A7593, A7610, A7611, A7612) SHA3-512: (A7585, A7593, A7610, A7611, A7612, A7584) SHA3-256: (A7585, A7593, A7610, A7611, A7612, A7584) SHAKE-128: (A7584, A7585, | | Key verification of ML-KEM encapsulation key | AsymKeyPair- KeyVer AsymKeyPair- PubKeyVal | FIPS 203. Encapsulation key verification | | A7593, A7610, A7611, A7612) ML-KEM KeyGen: (A7585, A7593, A7610, A7611, A7612) | | Signature Generation with EdDSA | DigSig-SigGen | FIPS 186-5; Signature Generation | | SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) EDDSA SigGen: (A7583, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614, A7584) SHAKE-256: (A7585, A7593, A7610, A7611, A7612, A7584) | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 57 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Type | Description | Properties | Algorithms | |----------------------------------------------|-------------------------|------------------------------------------|--------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Signature Verification with EdDSA | DigSig-SigVer | FIPS 186-5; Signature Verification | | EDDSA SigVer: (A7583, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614, A7584) SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) SHAKE-256: (A7585, A7593, A7610, A7611, | | Verification of EdDSA Public Key | AsymKeyPair- PubKeyVal | FIPS 186-5; Key verification | | A7612, A7584) EDDSA KeyVer: (A7583, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614, A7584) | | EdDSA Key Pair Generation | AsymKeyPair- KeyGen CKG | FIPS 186-5; Key pair generation | | SHA2-512: (A7583, A7591, A7604, A7606, A7608, A7614, A7584) EDDSA KeyGen: (A7583, A7585, A7591, A7593, A7604, A7606, A7608, A7610, A7611, A7612, A7614, A7584) SHAKE-256: (A7585, A7593, A7610, A7611, A7612, A7584) | | Key verification of ML-KEM decapsulation key | AsymKeyPair- KeyVer | FIPS 203. Decapsulation key verification | | ML-KEM KeyGen: (A7585, A7593, A7610, A7611, A7612) | | RSA key encapsulation | KTS-Encap | SP 800-56Br2; RSA key encapsulation | | KTS-IFC: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 58 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 10: Security Function Implementations | Name | Type | Description | Properties | Algorithms | |---------------------------|-----------|-----------------------------------------|--------------|------------------------------------------------------------| | RSA key un- encapsulation | KTS-Decap | SP 800-56Br2; RSA key un- encapsulation | | KTS-IFC: (A7583, A7584, A7591, A7604, A7606, A7608, A7614) | ### 2.7 Algorithm Specific Information #### 2.7.1 AES XTS In accordance with FIPS 140-3 IG C.I, the module implements a check that ensures, before performing any cryptographic operation, that the two AES keys used in AES XTS mode are not identical. Key_1 and Key_2 shall be generated and/or established independently according to the rules for component symmetric keys from NIST SP 800-133r2, Section 6.3. In addition, Section 4 of SP 800-38E states that the length of a single data unit encrypted or decrypted with AES XTS shall not exceed 2² ⁰ AES blocks, that is 16MB, of data per XTS instance. The XTS mode shall only be used for the cryptographic protection of data on storage devices. It shall not be used for other purposes, such as the encryption of data in transit. #### 2.7.2 Key Derivation using SP 800-132 PBKDF2 The module provides password-based key derivation (PBKDF2), compliant with SP 800-132. The module supports option 1a from Section 5.4 of SP 800-132, in which the Master Key (MK) or a segment of it is used directly as the Data Protection Key (DPK). In accordance with SP 800-132 and FIPS 140-3 IG D.N, the following requirements shall be met: - Derived keys shall only be used in storage applications. The MK shall not be used for other purposes. The module supports a minimum length of 112 bits for the MK or DPK. - Passwords or passphrases, used as an input for the PBKDF2, shall not be used as cryptographic keys. - The minimum length of the password or passphrase supported by the module is 8 characters. Assuming the worst-case scenario of all digits, this results in the estimated probability of guessing the password to be at most 10 -8 . Combined with the minimum iteration count as described below, this provides an acceptable trade-off between user experience and security against brute-force attacks. - A portion of the salt, with a length of at least 128 bits (shorter salts are not supported by the module), shall be generated randomly using the SP 800-90Ar1 DRBG provided by the module. - The iteration count shall be selected as large as possible, if the time required to generate the key using the entered password is acceptable for the users. If an iteration count less than 1000 is used, the module will indicate that invocation of the PBKDF2 service as non-approved. #### 2.7.3 Compliance to SP 800-56Arev3 Assurances The module offers DH and ECDH shared secret computation services compliant to the SP 800-56ARev3 and meeting IG D.F scenario 2 path (1). To meet the required assurances listed in section 5.6 of SP 800-56Arev3, the module shall be used together with an application that implements the 'TLS protocol' and the following steps shall be performed. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 59 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy 1. The entity using the module must use the module's "Key pair generation" service for generating DH/ECDH ephemeral keys. This meets the assurances required by key pair owner defined in the section 5.6.2.1 of SP 800-56ARev3. 2. As part of the module's shared secret computation (SSC) service, the module internally performs the public key validation on the peer's public key passed in as input to the SSC function. This meets the public key validity assurance required by the sections 5.6.2.2.2 of SP 800-56ARev3. 3. The module does not support static keys therefore the "assurance of peer's possession of private key" is not applicable. #### 2.7.4 SHA-3 and SHAKE The module implements the SHA-3 and SHAKE functions as both standalone functions and as part of higherlevel algorithms (in compliance with FIPS 140-3 IG C.C) as detailed in Section 2.6 Security Function Implementations table with corresponding certificates. #### 2.7.5 Legacy Algorithms The module utilizes the following legacy algorithms as defined in SP 800-131Arev2: - ECDSA Signature Verification, under FIPS 186-4, allows verifying elliptic curve-based signatures with curve P-192. - RSA Signature Verification, under FIPS 186-4, allows verifying signatures with X9.31 padding. #### 2.7.6 RSA Signatures The module's RSA signature generation and verification implementations were CAVP tested with moduli sizes 2048, 3072, and 4096 bits. These moduli sizes are allowed by FIPS 140-3 IG C.F. The module supports moduli sizes larger than 4096 bits. #### 2.7.7 RSA Key Generation The module's RSA key generation implementation was CAVP tested with moduli sizes 2048, 3072, 4096, 6144, and 8192 bits. These moduli sizes are allowed by FIPS 140-3 IG C.F. The module supports moduli sizes larger than 8192 bits. The number of Miller-Rabin tests is compliant with Table B.1 of FIPS 186-5. #### 2.7.8 Key Wrapping with AES The module supports Key Wrapping and Unwrapping with AES in compliance with FIPS 140-3 IG D.G. #### 2.7.9 AES GCM IV For TLS 1.2 and 1.3, the module offers the AES GCM implementation per Scenario 1 and 5 of the FIPS 140-3 IG C.H respectively. For TLS 1.2 the module is compliant with SP 800-52r2 Section 3.3.1 and the mechanism for IV generation is compliant with RFC 5288 and 8446. For TLS 1.3 defined in RFC8446, the module supports AES GCM cipher suites from Section 3.3.1 of SP800-52r2. The module does not implement the TLS 1.2 or 1.3 protocol. The module's implementation of AES GCM is used together with an application that runs outside the module's cryptographic boundary. The design of the TLS © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 60 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy protocol implicitly ensures that the counter (the nonce_explicit part of the IV) does not exhaust the maximum number of possible values for a given session key. In the event the module's power is lost and restored, the consuming application must ensure that a new key for use with the AES GCM key encryption or decryption under this scenario shall be established. Alternatively, the module also implements GCM with internal IV generation per Scenario 2 of IG C.H. The internally generated IVs are always 96 bits and are generated using the approved DRBG internal to the module's boundary. The module also provides a non-approved AES GCM encryption service which accepts arbitrary external IVs from the operator. The service can be requested by invoking the EVP_EncryptInit_ex2 API function with a non-NULL IV value. When this is the case, the API will set a non-approved service indicator as described in Section 4.3. #### 2.7.10 Compliance to SP 800-56Br2 Assurances To comply with the assurances found in Section 6.4 of SP 800-56Br2, the operator must use the module in the context of the TLS or SSH protocols. Additionally, the module's approved key pair generation service (see Section 4.3) must be used to generate RSA key pairs, or the key pairs must be obtained from another FIPSvalidated module. As part of this service, the module will internally perform the key pair validation of the generated public key. The operator must use the EVP_PKEY_public_check() API to perform partial public key validation of the peer public key, complying with Section 6.4.2.2 of SP 80056Br2. The operator must also confirm the peer's possession of private key by using any method specified in Section 6.4.2.3 of SP 800-56Br2. #### 2.7.11 Compliance to SP 800-227 If an application uses an ephemeral key pair, the application shall ensure that the key pair is used for only one execution of key-establishment via a KEM and shall be destroyed as soon as possible after its use using the zeroization methods specified in section 9.3 of this security policy. When using ML-KEM, the calling application shall select an ML-KEM parameter set with a security strength appropriate for the intended application, in accordance with SP 800-227 Section 4.2 (RM2). The module shall be deployed on an appropriately secured device and operational environment that protects sensitive KEM data from unauthorized access or modification, in accordance with SP 800-227 Section 4.2, RM4. The calling application shall ensure that the key-establishment process over the communication channel provides an application-appropriate level of integrity, in accordance with SP 800-227 Section 4.2, RM5. When using an externally obtained ML-KEM static public encapsulation key, the operator shall ensure that the proof of possession of the private key has been established prior to invoking the ML-KEM encapsulation service. This assurance may be obtained using a trusted third party (e.g., a certificate authority) or another mechanism appropriate for the deployment, consistent with the guidance of SP 800-227 Section 4.5. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 61 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy #### 2.7.12 Compliance to FIPS 203 The module does not establish SSPs using an approved key encapsulation mechanism (KEM). However, it does offer some or all of the underlying KEM cryptographic functionality to be used by an external operator/application as part of an approved KEM. The shared secret key output by ML-KEM can be used as a key for symmetric cryptography. If further key derivation is needed, the shared secret key shall be used with the SP 800-108 KDFs or SP 800-56C KDFs specified in section 2.6 of this security policy. #### 2.7.13 Compliance to FIPS 204 The module supports ML-DSA signature generation and verification using both the internal and external μ (Mu) interfaces. Per FIPS 204, the external Mu shall be provided by another cryptographic module. The module that is used to compute the Mu externally must have its SHAKE256 implementation CAVP certified. ### 2.8 RBG and Entropy Table 11: Entropy Certificates | Cert Number Vendor Name | Cert Number Vendor Name | |---------------------------|---------------------------| | E191 | Chainguard | Table 12: Entropy Sources | Name | Type | Operational Environment | Sample Size | Entropy per Sample | Conditioning Component | |-----------------------------------------------|---------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|---------------|----------------------|--------------------------| | Chainguard CPU Time Jitter RNG Entropy Source | Non- Physical | Chainguard Image 20230214 on Amazon Linux 2023 on EC2 m7g.metal on Amazon Graviton3 AWS Graviton3; Chainguard Image 20230214 on Amazon Linux 2023 on EC2 m7i.metal-24xl on Intel Sapphire Rapids Xeon Platinum 8488C | 256 | Full entropy | SHA3-256 (A5446) | The entropy source is statically compiled into the module and hence it is located within the cryptographic boundary of the module. As per the Public Use Document of entropy certificates E191, the entropy source provides full entropy of 256 bits. In addition to the DRBG algorithms provided to the operator as random number generation services, the module internally uses two dedicated DRBG instances based on SP 800-90Ar1 to generate seeds for asymmetric key pairs and random numbers for security functions. The two instances are: - Private DRBG: AES-256 CTR_DRBG with derivation function (256 bits of security strength). This DRBG is used to generate secret random values (e.g. during asymmetric key pair generation). It can be accessed using RAND_priv_bytes. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 62 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy - Public DRBG: AES-256 CTR_DRBG with derivation function (256 bits of security strength). This DRBG is used to generate general purpose random values that do not need to remain secret (e.g. initialization vectors). It can be accessed using RAND_bytes. All the random values needed internally in the implemented security functions are generated by one of the two aforementioned CTR DRBG instances. ### 2.9 Key Generation The module implements Cryptographic Key Generation (CKG, vendor affirmed), compliant with SP 800-133r2. When random values are required, they are obtained from the SP 800-90Ar1 approved DRBG, compliant with Section 4 of SP 800-133r2. This method does not use the value V as described in Additional Comment 2 of FIPS 140-3 IG D.H. The following methods are implemented: Safe primes key pair generation, RSA key pair generation, ECC (ECDH and ECDSA) key pair generation, EdDSA key pair generation, ML-KEM key pair generation, ML-DSA key pair generation, and SLH-DSA key pair generation. Intermediate key generation values are not output from the module and are explicitly zeroized after processing the service. Additionally, the module implements the following key derivation methods: (KBKDF, KDA OneStep, KDA TwoStep, HKDF, ANS X9.42 KDF (CVL), ANS X9.63 KDF (CVL), SSH KDF (CVL), TLS 1.2 KDF (CVL), TLS 1.3 KDF (CVL), PBKDF2 All certificates can be found in the Approved Algorithms table. ### 2.10 Key Establishment The module implements key agreement, key transport, and key encapsulation methods as listed in the Security Function Implementations table in Section 2.6. ### 2.11 Industry Protocols The module implements the SSH KDF (CVL) for use in the SSH protocol (RFC 4253 and RFC 6668). GCM with internal IV generation in the approved mode is compliant with versions 1.2 and 1.3 of the TLS protocol (RFC 5288 and 8446) and shall only be used in conjunction with the TLS protocol. Additionally, the module implements the TLS 1.2 and TLS 1.3 key derivation functions for use in the TLS protocol. For Diffie-Hellman, the module supports the use of the safe primes defined in RFC 3526 (IKE) and RFC 7919 (TLS). Note that the module only implements key pair generation, key pair verification, and shared secret computation. No other part of the IKE or TLS protocols is implemented (with the exception of the TLS 1.2 KDF (CVL) and 1.3 KDF (CVL)): - IKE (RFC 3526): MODP-2048 (ID = 14), MODP-3072 (ID = 15), MODP-4096 (ID = 16), MODP-6144 (ID = 17), MODP-8192 (ID = 18) © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 63 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy - TLS (RFC 7919): ffdhe2048 (ID = 256), ffdhe3072 (ID = 257), ffdhe4096 (ID = 258), ffdhe6144 (ID = 259), ffdhe8192 (ID = 260) For Elliptic Curve Diffie-Hellman, the module supports the NIST-defined P-224, P-256, P-384, and P-521 curves. No parts of the SSH, TLS, or IKE protocols, other than those mentioned above, have been tested by the CAVP or CMVP. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 64 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 3 Cryptographic Module Interfaces ### 3.1 Ports and Interfaces Table 13: Ports and Interfaces | Physical Port Logical Interface(s) | Physical Port Logical Interface(s) | Data That Passes | |--------------------------------------|--------------------------------------|-------------------------------| | N/A | Data Input | API input parameters | | N/A | Data Output | API output parameters | | N/A | Control Input | API function calls | | N/A | Status Output | API return codes, error queue | As a software-only module, the module does not have physical ports. The module does not implement a control output interface. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 65 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 4 Roles, Services, and Authentication ### 4.1 Authentication Methods N/A for this module. ### 4.2 Roles Table 14: Roles | Name | Type Operator Type Authentication Methods | Type Operator Type Authentication Methods | Type Operator Type Authentication Methods | |----------------|---------------------------------------------|---------------------------------------------|---------------------------------------------| | Crypto Officer | Role | CO | None | The module supports the Crypto Officer role only. This sole role is implicitly and always assumed by the operator of the module. No support is provided for a maintenance role. There are no concurrent operators. ### 4.3 Approved Services | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |---------------------------|---------------------------------------|------------------------------------------------------------------------------------|------------------------------------------|----------------------------------|---------------------------------------------------|-------------------------------| | Message Digest | Comput e a message digest | EVP_DigestFinal returns 1 | Message | Message digest | Message Digest with SHA Message Digest with SHAKE | Crypto Officer | | Symmetri c Encryptio n | Encrypt a plaintext | EVP_EncryptFinal_ex returns 1 | AES Key, plaintext, IV | Ciphertext | Encryptio n with AES | Crypto Officer - AES Key: W,E | | Symmetri c Decrypti on | Decrypt a cipherte xt | EVP_DecryptFinal_ex returns 1 | AES Key, ciphertext, IV | Plaintext | Decrypti on with AES | Crypto Officer - AES Key: W,E | | Authenti cated Symmetri c | Encrypt and authenti cate a plaintext | GCM: OSSL_CIPHER_PARAM_AEAD_IV_GE NERATED is 1; CCM: EVP_EncryptFinal_ex returns 1 | AES Key, plaintext/key to be wrapped, IV | Ciphertext/ wrapped key, MAC tag | Authenti cated Encryptio n with AES | Crypto Officer - AES Key: W,E | This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 66 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |------------------------------------------|-----------------------------------------|-------------------------------------------------|-----------------------------------------------|----------------------|-------------------------------------------------------------------|---------------------------------------------------------------------------------------| | Encryptio n | | | | | | - GCM IV: G,R,E | | Authenti cated Symmetri c Decrypti on | Decrypt and authenti cate a cipherte xt | EVP_DecryptFinal_ex returns non- negative value | AES Key, ciphertext/wr apped key, MAC tag, IV | Plaintext or Failure | Authenti cated Decrypti on with AES | Crypto Officer - AES Key: W,E - GCM IV: W,E | | AES Message Authenti cation Generatio n | Comput e a MAC tag using AES | EVP_MAC_final returns 1 | AES Key, message | MAC tag | Message Authenti cation Generatio n with AES | Crypto Officer - AES Key: W,E | | HMAC Message Authenti cation Generatio n | Comput e a MAC tag using HMAC | OSSL_MAC_PARAM_FIPS_APPROVED _INDICATOR is 1 | HMAC Key, message | MAC tag | Message Authenti cation Generatio n with HMAC | Crypto Officer - HMAC Key: W,E | | KMAC Message Authenti cation Generatio n | Comput e a MAC tag using KMAC | OSSL_MAC_PARAM_FIPS_APPROVED _INDICATOR is 1 | KMAC Key, message | MAC tag | Message Authenti cation Generatio n with KMAC | Crypto Officer - KMAC Key: W,E | | TLS KDF Key Derivatio n | TLS key derivatio n | OSSL_KDF_PARAM_FIPS_APPROVED _INDICATOR is 1 | Pre-master secret | TLS Derived Key | Key Derivatio n with TLS 1.2 KDF Key Derivatio n with TLS 1.3 KDF | Crypto Officer - Shared Secret: W,E - TLS Derived Key: G,R - TLS Master Secret: G,E,Z | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 67 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |---------------------------|------------------------------------------|----------------------------------------------|------------------------------------------------------------------------------------------------------------|--------------------------------------------------|------------------------------------|-----------------------------------------------------------------------| | KBKDF Key Derivatio n | Derive a key from a key- derivatio n key | OSSL_KDF_PARAM_FIPS_APPROVED _INDICATOR is 1 | Key- Derivation Key | KBKDF Derived Key | Key Derivatio n with KBKDF | Crypto Officer - Key- Derivati on Key: W,E - KBKDF Derived Key: G,R | | ANS X9.42 Key Derivatio n | Derive a key from a shared secret | OSSL_KDF_PARAM_FIPS_APPROVED _INDICATOR is 1 | Shared Secret | ANS X9.42 Derived Key | Key Derivatio n with ANS X9.42 KDF | Crypto Officer - ANS X9.42 Derived Key: G,R - Shared Secret: W,E | | ANS X9.63 Key Derivatio n | Derive a key from a shared secret | OSSL_KDF_PARAM_FIPS_APPROVED _INDICATOR is 1 | Shared Secret | ANS X9.63 Derived Key | Key Derivatio n with X9.63 KDF | Crypto Officer - Shared Secret: W,E - ANS X9.63 Derived Key: G,R | | HKDF Key Derivatio n | Derive a key from a shared secret | OSSL_KDF_PARAM_FIPS_APPROVED _INDICATOR is 1 | Shared Secret/Concat enated hybrid shared secret (ML-KEM and ECDH)/Conc atenated hybrid shared secret (ML- | HKDF Derived key/Hybrid ML-KEM Shared Secret Key | Key Derivatio n with KDA HKDF | Crypto Officer - Shared Secret: W,E - HKDF Derived Key: G,R - Concate | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 68 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |-----------------------------|-----------------------------------|----------------------------------------------|-----------------|-------------------------|----------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | KEM and X25519) | | | nated hybrid shared secret (ML- KEM and ECDH): W,E - Concate nated hybrid shared secret (ML- KEM and X25519): W,E - Hybrid ML- KEM Shared Secret Key: | | OneStep KDA Key Derivatio n | Derive a key from a shared secret | OSSL_KDF_PARAM_FIPS_APPROVED _INDICATOR is 1 | Shared Secret | KDA OneStep Derived Key | Key Derivatio n with KDA OneStep | G,R Crypto Officer - Shared Secret: W,E - KDA OneStep Derived Key: G,R | | TwoStep KDA Key Derivatio n | Derive a key from a shared secret | OSSL_KDF_PARAM_FIPS_APPROVED _INDICATOR is 1 | Shared Secret | KDA TwoStep Derived Key | Key Derivatio n with KDA TwoStep | Crypto Officer - Shared Secret: W,E - KDA | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 69 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |---------------------------|-----------------------------------|-----------------------------------------------|----------------|---------------------|-------------------------------------|------------------------------------------------------------------------------------------------------------------------------| | | | | | | | TwoStep Derived Key: G,R | | SSH KDF key derivatio n | Derive a key from a shared secret | OSSL_KDF_PARAM_FIPS_APPROVED _INDICATOR is 1 | Shared Secret | SSH KDF Derived Key | Key Derivatio n with SSH KDF | Crypto Officer - Shared Secret: W,E - SSH KDF Derived Key: G,R | | PBKDF Key Derivatio n | Derive a key from a passwor d | OSSL_KDF_PARAM_FIPS_APPROVED _INDICATOR is 1 | Password | PBKDF Derived Key | Key Derivatio n with PBKDF2 | Crypto Officer - Passwor d: W,E - PBKDF Derived Key: | | Random Number Generatio n | Generate random number | OSSL_RAND_PARAM_FIPS_APPROVE D_INDICATOR is 1 | Number of bits | Random number | Random Number Generatio n with DRBG | G,R Crypto Officer - Entropy Input: W,E,Z - DRBG Seed: G,E,Z - DRBG Internal State (V, Key): G,W,E - DRBG Internal State (V, | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 70 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |-----------------------------------------|------------------------------------------|-------------------------------------------------------------------------------------------------------|----------------------------------------------|---------------|----------------------------------|--------------------------------------------------------------------------------| | | | | | | | C): G,W,E | | KAS- FFC-SSC Shared Secret Computat ion | Comput e a shared secret | EVP_PKEY_derive returns 1 | DH Private Key (owner), DH Public Key (peer) | Shared Secret | Shared Secret Computat ion | Crypto Officer - Shared Secret: G,R - DH Private Key: W,E - DH Public Key: W,E | | KAS- ECC-SSC Shared Secret Computat ion | Comput e a shared secret | OSSL_EXCHANGE_PARAM_FIPS_APP ROVED_INDICATOR is 1 | EC Private Key (owner), EC Public Key (peer) | Shared Secret | Shared Secret Computat ion | Crypto Officer - Shared Secret: G,R - EC Private Key: W,E - EC Public Key: W,E | | RSA Digital Signature Generatio n | Generate a digital signatur e with RSA | OSSL_SIGNATURE_PARAM_FIPS_APP ROVED_INDICATOR is 1 and OSSL_SIGNATURE_PARAM_FIPS_VER IFY_MESSAGE is 1 | RSA Private Key, message, hash algorithm | Signature | Signature Generatio n with RSA | Crypto Officer - RSA Private Key: W,E | | ECDSA Digital Signature Generatio n | Generate a digital signatur e with ECDSA | OSSL_SIGNATURE_PARAM_FIPS_APP ROVED_INDICATOR is 1 and OSSL_SIGNATURE_PARAM_FIPS_VER IFY_MESSAGE is 1 | EC Private Key, message, hash algorithm | Signature | Signature Generatio n with ECDSA | Crypto Officer - EC Private Key: W,E | | RSA Digital | Verify a digital | OSSL_SIGNATURE_PARAM_FIPS_APP ROVED_INDICATOR is 1 and | RSA Public Key, message, | Pass or Fail | Signature Verificati | Crypto Officer | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 71 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |---------------------------------------|-----------------------------------------|-------------------------------------------------------------------------------------------------------|---------------------------------------------------|-------------------------------------------------------------------|--------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------| | Signature Verificati on | signatur e using RSA | OSSL_SIGNATURE_PARAM_FIPS_VER IFY_MESSAGE is 1 | signature, hash algorithm | | on with RSA Signature Verificati on with RSA (Legacy) | - RSA Public Key: W,E | | ECDSA Digital Signature Verificati on | Verify a digital signatur e using ECDSA | OSSL_SIGNATURE_PARAM_FIPS_APP ROVED_INDICATOR is 1 and OSSL_SIGNATURE_PARAM_FIPS_VER IFY_MESSAGE is 1 | EC Public Key, message, signature, hash algorithm | Pass or Fail | Signature Verificati on with ECDSA Signature Verificati on with ECDSA (Legacy) | Crypto Officer - EC Public Key: W,E | | RSA Key Pair Generatio n | Generate an RSA key pair | EVP_PKEY_keygen returns 1 | Modulus bits | Module Generated RSA Private Key, Module Generated RSA Public Key | Key Pair Generatio n with RSA | Crypto Officer - Module Generat ed RSA Private Key: G,R - Module Generat ed RSA Public Key: G,R - Interme diate Key Generati on Value: G,E,Z | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 72 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |----------------------------------|-------------------------|-----------------------------------------------|----------|-----------------------------------------------------------------|---------------------------------------|-------------------------------------------------------------------------------------------------------------------------------| | ECDSA Key Pair Generatio n | Generate an EC key pair | OSSL_PKEY_PARAM_FIPS_APPROVE D_INDICATOR is 1 | Curve | Module Generated EC Private Key, Module Generated EC Public Key | Key Pair Generatio n with ECDSA | Crypto Officer - Module Generat ed EC Private Key: G,R - Module Generat ed EC Public Key: G,R - Interme diate Key Generati on | | Safe Primes Key Pair Generatio n | Generate a DH key pair | EVP_PKEY_keygen returns 1 | Group | Module Generated DH Private Key, Module Generated DH Public Key | Key Pair Generatio n with Safe Primes | Value: G,E,Z Crypto Officer - Module Generat ed DH Private Key: G,R - Module Generat ed DH Public Key: G,R - Interme diate | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 73 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |-----------------------------------|------------------------------------------|-----------------------------------------------------------------------------|-------------------------------|----------------------------|-----------------------------------------|-------------------------------------------------------| | | | | | | | Key Generati on Value: G,E,Z | | ECDSA Public Key Verificati on | Verify an EC public key | EVP_PKEY_check or EVP_PKEY_public_check returns 1 | EC Public Key | Pass or Fail | Public Key Verificati on with ECDSA | Crypto Officer - EC Public Key: W,E | | Safe Prime Key Pair Verificati on | Verify a DH key pair | EVP_PKEY_check or EVP_PKEY_public_check or EVP_PKEY_private_check returns 1 | DH Private Key, DH Public Key | Pass or Fail | Key Pair Verificati on with Safe Primes | Crypto Officer - DH Private Key: W,E - DH Public Key: | | Show Version | Return the name and version informat ion | None | None | Module name and version | None | W,E Crypto Officer | | Show Status | Return the module status | None | None | Module status | None | Crypto Officer | | Self-Test | Perform the CASTs and integrity test | None | None | Pass or Fail of self-tests | None | Crypto Officer | | Zeroizati on | Zeroize any SSP | None | An SSP | None | None | Crypto Officer - AES Key: Z | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 74 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio SSP Access | |--------|----------------|-------------|----------|-----------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | | - HMAC Key: Z - KMAC Key: Z - Key- Derivati on Key: Z - Shared Secret: Z - Passwor d: Z - PBKDF Derived Key: Z - KBKDF Derived Key: Z - ANS X9.42 Derived Key: Z - ANS X9.63 Derived Key: Z - HKDF Derived Key: Z - KDA OneStep Derived Key: Z - KDA TwoStep Derived Key: Z - TLS Derived Key: Z | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 75 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |--------|----------------|-------------|----------|-----------|-----------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | | | - SSH KDF Derived Key: Z - Entropy Input: Z - DRBG Internal State (V, Key): Z - DRBG Seed: Z - DH Private Key: Z - DH Public Key: Z - EC Private Key: Z - EC Public Key: Z - RSA Private Key: Z - RSA Public Key: Z - Module Generat ed DH Private Key: Z - Module Generat ed DH Public Key: Z | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 76 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |--------|----------------|-------------|----------|-----------|-----------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | | | - Module Generat ed EC Private Key: Z - Module Generat ed EC Public Key: Z - Module Generat ed RSA Private Key: Z - Module Generat ed RSA Public Key: Z - ML- DSA Public Key: Z - ML- DSA Private Key: Z - ML- KEM Public Key: Z - ML- KEM Private Key: Z - SLH- DSA Public | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 77 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |--------|----------------|-------------|----------|-----------|-----------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | | | Key: Z - SLH- DSA Private Key: Z - Module Generat ed ML- DSA Public Key: Z - Module Generat ed ML- DSA Private Key: Z - Module Generat ed ML- KEM Public Key: Z - Module Generat ed ML- KEM Private Key: Z - Module Generat ed SLH- DSA Public Key: Z - Module Generat | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 78 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |--------|----------------|-------------|----------|-----------|-----------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | | | ed SLH- DSA Private Key: Z - ML- KEM Seed: Z - ML- DSA Seed: Z - SLH- DSA Seed: Z - ML- KEM Shared Secret: Z - EdDSA public key: Z - EdDSA private key: Z - Concate nated hybrid shared secret (ML- KEM and X25519): Z - Concate nated hybrid shared secret (ML- KEM and | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 79 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |---------------------------|----------------------------------------------------------------------------|----------------------------------------------|-------------------|-------------------------------------------------------------------------|---------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | | | ECDH): Z | | ML-KEM Key Generatio n | Generate a ML- KEM key pair | EVP_PKEY_keygen returns 1 | None | Module Generated ML-KEM Private Key, Module Generated ML-KEM Public Key | Key Generatio n with ML-KEM | Crypto Officer - Module Generat ed ML- KEM Public Key: G,R - Module Generat ed ML- KEM Private Key: G,R - ML- KEM Seed: G,E - Interme diate Key Generati on Value: G,E,Z | | ML-KEM Key Encapsul ation | Perform encapsul ation to compute an ML- KEM shared secret and cipherte xt | OSSL_KEM_PARAM_FIPS_APPROVED _INDICATOR is 1 | Encapsulation Key | Shared Secret, Ciphertext | Key Encapsul ation with ML- KEM | Crypto Officer - ML- KEM Public Key: W,E - ML- KEM Shared | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 80 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |---------------------------|------------------------------------------------------------|--------------------------------|-------------------------------|-------------------------------------------------------------------------|---------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | | | Secret: G,R | | ML-KEM Key Decapsul ation | Perform decapsul ation to compute an ML- KEM shared secret | EVP_PKEY_decapsulate returns 1 | Decapsulation Key, Ciphertext | Shared Secret | Key Decapsul ation with ML- KEM | Crypto Officer - ML- KEM Private Key: W,E - ML- KEM Shared Secret: G,R | | ML-DSA Key Generatio n | Generate a ML- DSA key pair | EVP_PKEY_keygen returns 1 | None | Module Generated ML-DSA Private Key, Module Generated ML-DSA Public Key | Key Generatio n with ML-DSA | Crypto Officer - Module Generat ed ML- DSA Public Key: G,R - Module Generat ed ML- DSA Private Key: G,R - ML- DSA Seed: G,E - Interme diate Key Generati on | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 81 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |-----------------------------------------------------|-------------------------------------------|---------------------------|-------------------------------------------------------|---------------------------------------------------------------------------|-------------------------------------|----------------------------------------------------------------------| | | | | | | | Value: G,E,Z | | ML-DSA Signature Generatio n (External Interface) | Generate a digital signatur e with ML-DSA | EVP_PKEY_sign returns 1 | ML-DSA private Key, message, context string | Digital Signature | Signature Generatio n with ML-DSA | Crypto Officer - ML- DSA Private Key: W,E | | ML-DSA Signature Generatio n (Internal Interface) | Generate a digital signatur e with ML-DSA | EVP_PKEY_sign returns 1 | ML-DSA private Key, M', randomness rnd | Digital Signature | Signature Generatio n with ML-DSA | Crypto Officer - ML- DSA Private Key: W,E | | ML-DSA Signature Verificati on (External Interface) | Verify a digital signatur e with ML-DSA | EVP_PKEY_verify returns 1 | ML-DSA public key, message, signature, context string | Pass or Fail | Signature Verificati on with ML-DSA | Crypto Officer - ML- DSA Public Key: W,E | | ML-DSA Signature Verificati on (Internal Interface) | Verify a digital signatur e with ML-DSA | EVP_PKEY_verify returns 1 | ML-DSA public key, M', signature | Pass or Fail | Signature Verificati on with ML-DSA | Crypto Officer - ML- DSA Public Key: W,E | | SLH-DSA Key Generatio n | Generate a SLH- DSA key pair | EVP_PKEY_keygen returns 1 | None | Module Generated SLH-DSA Private Key, Module Generated SLH-DSA Public Key | Key Generatio n with SLH-DSA | Crypto Officer - Module Generat ed SLH- DSA Public Key: G,R - Module | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 82 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |------------------------------------------------------|---------------------------------------------|---------------------------|--------------------------------------------------------|-------------------|--------------------------------------|--------------------------------------------------------------------------------------------------| | | | | | | | Generat ed SLH- DSA Private Key: G,R - SLH- DSA Seed: G,E - Interme diate Key Generati on Value: | | SLH-DSA Signature Generatio n (External Interface) | Generate a digital signatur e with SLH- DSA | EVP_PKEY_sign returns 1 | SLH-DSA private key, message, context string | Digital Signature | Signature Generatio n with SLH-DSA | G,E,Z Crypto Officer - SLH- DSA Private Key: W,E | | SLH-DSA Signature Generatio n (Internal Interface) | Generate a digital signatur e with SLH- DSA | EVP_PKEY_sign returns 1 | SLH-DSA private key, M', randomness addrnd | Digital Signature | Signature Generatio n with SLH-DSA | Crypto Officer - SLH- DSA Private Key: W,E | | SLH-DSA Signature Verificati on (External Interface) | Verify a digital signatur e with SLH- DSA | EVP_PKEY_verify returns 1 | SLH-DSA public key, message, signature, context string | Pass or Fail | Signature Verificati on with SLH-DSA | Crypto Officer - SLH- DSA Public Key: W,E | | SLH-DSA Signature Verificati | Verify a digital signatur | EVP_PKEY_verify returns 1 | SLH-DSA public key, M', signature | Pass or Fail | Signature Verificati | Crypto Officer - SLH- | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 83 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |---------------------------------|-------------------------------------------------------------|-------------------------------------------------------------------------------|-------------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------| | on (Internal Interface) | e with SLH- DSA | | | | on with SLH-DSA | DSA Public Key: W,E | | MLX- KEM Hybrid Key Generatio n | Generate an ML- KEM key pair and X25519 key pair | EVP_PKEY_keygen returns 1 | None | Module Generated ML-KEM Encapsulatio n Key, Module Generated ML-KEM Decapsulatio n Key, X25519 public key, X25519 private key | Key Generatio n with KEM- Hybrid- MLX- KEM | Crypto Officer - ML- KEM Seed: G,E,Z - Module Generat ed ML- KEM Public Key: G,R - Module Generat ed ML- KEM Private Key: G,R - Interme diate Key Generati on Value: | | MLX- KEM Key Encapsul ation | Perform hybrid ML- KEM and X25519 encapsul ation to produce | OSSL_KEM_PARAM_FIPS_APPROVED _INDICATOR parameter of ML-KEM EVP_PKEY_CTX is 1 | X public key, X private key, ML-KEM encapsulation key | Concatenate d hybrid shared secret (ML-KEM and X25519), ciphertext | Key Encapsul ation with KEM- Hybrid- MLX- KEM | G,E,Z Crypto Officer - ML- KEM Public Key: W,E - Concate | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 84 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |-----------------------------|---------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------|-----------------------------------------------------|--------------------------------------------------------|-----------------------------------------------------------------------------------------------|------------------------------------------------------------------------------------------------------| | | an ML- KEM cipherte xt and concaten ated hybrid shared secret. | | | | | nated hybrid shared secret (ML- KEM and X25519): G,R | | MLX- KEM Key Decapsul ation | Perform hybrid ML- KEM and X25519 decapsul ation to produce a concaten ated hybrid shared secret. | EVP_PKEY_decapsulate returns 1 | X private key, ML-KEM decapsulation key, ciphertext | Concatenate d hybrid shared secret (ML-KEM and X25519) | Key Decapsul ation with KEM- Hybrid- MLX- KEM | Crypto Officer - ML- KEM Private Key: W,E - Concate nated hybrid shared secret (ML- KEM and X25519): | | ML-KEM Key Verificati on | Verificat ion of encapsul ation key or decapsul ation key | EVP_PKEY_check or EVP_PKEY_public_check or EVP_PKEY_private_check returns 1 | ML-KEM encapsulation key or decapsulation key | Success/failu re | Key verificati on of ML-KEM encapsula tion key Key verificati on of ML-KEM decapsula tion key | G,R Crypto Officer - ML- KEM Public Key: W,E - ML- KEM Private Key: W,E | | EdDSA Digital Signature | Generate a digital signatur | EVP_PKEY_sign returns 1 | EdDSA private key, message | Signature | Signature Generatio | Crypto Officer - EdDSA | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 85 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |--------------------------------|----------------------------------------|---------------------------------------------------|--------------------------------------|-------------------------------------|------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------| | Generatio n | e with ECDSA | | | | n with EdDSA | private key: W,E | | EdDSA Digital Verificati on | Verify a digital signatur e with EdDSA | EVP_PKEY_verify returns 1 | EdDSA public key, message, signature | Success/failu re | Signature Verificati on with EdDSA | Crypto Officer - EdDSA public key: W,E | | EdDSA Public Key Verificati on | Verify an EdDSA public key | EVP_PKEY_check or EVP_PKEY_public_check returns 1 | EdDSA public key | Success/failu re | Verificati on of EdDSA Public Key | Crypto Officer - EdDSA public key: W,E | | EdDSA Key Pair Generatio n | Generate an EdDSA key pair | EVP_PKEY_keygen returns 1 | Desired EdDSA curve | EdDSA public key, EdDSA private key | EdDSA Key Pair Generatio n | Crypto Officer - Module generate d EdDSA public key: G,R - Module generate d EdDSA private key: G,R - Interme diate Key Generati on Value: G,E,Z | | Hybrid- ML- KEM- | Generate an ML- KEM | EVP_PKEY_keygen returns 1 | Desired ML- KEM | ML-KEM encapsulatio n key, ML- | Key Generatio n with | Crypto Officer - | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 86 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |--------------------------------------|--------------------------------------|-------------------------------------------------------------------------------|---------------------------------------------------------|-------------------------------------------------------|-------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | ECDH Key Pair Generatio n | key pair and an EC P- curve key pair | | parameter set and P curve | KEM decapsulatio n key, EC public key, EC private key | Hybrid- ML- KEM- ECDH | Module Generat ed EC Private Key: G,R - Module Generat ed EC Public Key: G,R - Module Generat ed ML- KEM Public Key: G,R - Module Generat ed ML- KEM Private Key: G,R - Interme diate Key Generati on Value: G,E,Z | | Hybrid- ML- KEM- ECDH encapsula tion | Perform hybrid ML- KEM and ECDH | OSSL_KEM_PARAM_FIPS_APPROVED _INDICATOR parameter of ML-KEM EVP_PKEY_CTX is 1 | ML-KEM encapsulation key, EC public key, EC private key | Concatenate d hybrid shared secret (ML-KEM and ECDH), | Key Encapsul ation with Hybrid- ML- | Crypto Officer - EC Public Key: R,W,E | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 87 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |--------------------------------------|-------------------------------------------------------------------------------------------------|--------------------------------|---------------------------------------------------------|------------------------------------------------------|-----------------------------------------------|------------------------------------------------------------------------------------------------------------------------------------| | | encapsul ation to produce ML- KEM cipherte xt and concaten ated hybrid shared secret. | | | EC public key | KEM- ECDH | - ML- KEM Public Key: W,E - Concate nated hybrid shared secret (ML- KEM and ECDH): G,R - EC Private Key: W,E | | Hybrid- ML- KEM- ECDH decapsula tion | Perform hybrid ML- KEM and ECDH decapsul ation to produce a concaten ated hybrid shared secret. | EVP_PKEY_decapsulate returns 1 | ML-KEM decapsulation key, EC public key, EC private key | Concatenate d hybrid shared secret (ML-KEM and ECDH) | Key Decapsul ation with Hybrid- ML- KEM- ECDH | Crypto Officer - ML- KEM Private Key: W,E - EC Private Key: W,E - EC Public Key: W,E - Concate nated hybrid shared secret (ML- KEM | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 88 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 15: Approved Services | Name | Descrip tion | Indicator | Inputs | Outputs | Security Functio ns | SSP Access | |---------------------------------------|---------------------------------|--------------------------------------------------------|-----------------------------------------|----------------------|----------------------------|-------------------------------------------------------------| | | | | | | | and ECDH): G,R | | RSA key encapsula tion | Key encapsul ation with RSA | EVP_PKEY_encrypt returns 1 | RSA Public Key, Key to encapsulate | Encapsulate d key | RSA key encapsula tion | Crypto Officer - RSA Public Key: W,E | | RSA key un- encapsula tion | Key un- encapsul ation with RSA | EVP_PKEY_decrypt returns 1 | RSA Private Key, Key to un- encapsulate | Un- encapsulated key | RSA key un- encapsula tion | Crypto Officer - RSA Private Key: W,E | | RSA- based shared secret computat ion | KAS- IFC-SSC | EVP_PKEY_encapsulate or EVP_PKEY_decapsulate returns 1 | RSA private key, RSA public key | Shared secret | Shared Secret Computat ion | Crypto Officer - RSA Private Key: W,E - RSA Public Key: W,E | The module provides services to operators that assume the available role. All services are described in detail in the API documentation (manual pages). The Approved Services table and the Non-Approved Services table define the services that utilize approved and non-approved security functions in this module. For the respective tables, the convention below applies when specifying the access permissions (types) that the service has for each SSP. - Generate (G): The module generates or derives the SSP. - Read (R): The SSP is read from the module (e.g., the SSP is output). - Write (W): The SSP is updated, imported, or written to the module. - Execute(E): The module uses the SSP in performing a cryptographic operation. - Zeroize (Z): The module zeroizes the SSP. To interact with the module, a calling application must use the EVP API layer provided by OpenSSL. This layer will delegate the request to the FIPS provider, which will in turn perform the requested service. Additionally, this EVP API layer can be used to retrieve the approved service indicator for the module. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 89 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ### 4.4 Non-Approved Services | Name | Description | Algorithms | Role | |----------------------------------------------------------------------|------------------------------------------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------| | Encryption | AES GCM (external IV) | AES GCM encryption with external IV | CO | | ML-KEM encapsulation with user-provided randomness | Key encapsulation | ML-KEM encapsulation with user- provided randomness | CO | | Hybrid ML-KEM and X25519 encapsulation with user-provided randomness | Hybrid ML-KEM and X25519 encapsulation with user-provided randomness for use in ML-KEM encapsulation | ML-KEM encapsulation with user- provided randomness | CO | | Non-approved Digital Signature Generation | Non-approved RSA or ECDSA signature generation | RSA SigGen with X9.31 padding or with modulus length < 2048 bits or with PSS salt length > digest length or without hashing (primitive) ECDSA SigGen with P-192 or with SHA2-512/256; ECDSA deterministic SigGen with P-192 or with SHA2- 512/256; ECDSA SigGen component with P-192 | CO | | Non-approved Digital Signature Verification | Non-approved RSA or ECDSA signature verification | RSA SigVer with modulus length < 2048 bits or with PSS salt length > digest length or without hashing (primitive) ECDSA SigVer with SHA2-512/256; ECDSA SigVer component | CO | | Non-approved Key Derivation | Non-approved PBKDF, TLS, KBKDF, SSH, One step KDF, two step KDF, HKDF, ANS X9.42 KDF, ANS X9.63 KDF | PBKDF2 with password length < 8 characters or salt length < 128 bits or output key length < 112 bits or iteration count < 1000 TLS 1.2 KDF without extended master secret or with SHA2-512/256 or with SHA-3 functions or with input secret length < 112 bits KBKDF with input key length < 112 bits SSH KDF with SHA2-512/256 or with SHA-3 functions or with input secret length < 112 bits TLS 1.3 KDF with SHA2-512 or SHA2- 512/256 or SHA-3 functions or input secret length < 112 bits One step KDF, two step KDF, HKDF, ANS X9.42 KDF, ANS X9.63 KDF with input secret length < 112 bits | CO | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 90 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 16: Non-Approved Services | Name | Description | Algorithms | Role | |-----------------------------------------------------|--------------------------------------------|-----------------------------------------------------------------------------------------|--------| | Non-approved Random Bit Generation | Non-approved HMAC_DRBG or Hash_DRBG | Hash_DRBG or HMAC_DRBG with SHA2-384 or SHA2-512/256 or SHA-3 functions or KMAC | CO | | Non-approved Message Authentication Code Generation | Non-approved HMAC or KMAC | HMAC with key length < 112 bits KMAC with key length < 112 bits or tag length < 32 bits | CO | | Non-approved Shared Secret Computation | Non-approved elliptic curve Diffie-Hellman | ECDH with P-192 | CO | | Non-approved Key Generation | Non-approved key generation | ECDSA KeyGen with P-192 | CO | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 91 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 5 Software/Firmware Security ### 5.1 Integrity Techniques The integrity of the module is verified by comparing a HMAC-SHA2-256 value calculated at run time with the HMAC-SHA2-256 value embedded in the fipsmodule.cnf file that was computed at build time. The key used for the HMAC calculation is contained within the module. ### 5.2 Initiate on Demand Integrity tests are performed as part of the pre-operational self-tests, which are executed when the module is initialized. The integrity test may be invoked on-demand by unloading and subsequently re-initializing the module. This will perform (among others) the software integrity test. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 92 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 6 Operational Environment ### 6.1 Operational Environment Type and Requirements Type of Operational Environment: Modifiable ##### How Requirements are Satisfied: The module shall be installed as stated in Section 11. If properly installed, the operating system provides process isolation and memory protection mechanisms that ensure appropriate separation for memory access among the processes on the system. Each process has control over its own data and uncontrolled access to the data of other processes is prevented. ### 6.2 Configuration Settings and Restrictions Instrumentation tools like the ptrace system call, gdb and strace, userspace live patching, as well as other tracing mechanisms offered by the Linux environment such as ftrace or systemtap, shall not be used in the operational environment. The use of any of these tools implies that the cryptographic module is running in a non-validated operational environment. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 93 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 7 Physical Security The module is comprised of software only, and therefore this section is not applicable. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 94 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 8 Non-Invasive Security This module does not implement any non-invasive security mechanism, and therefore this section is not applicable. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 95 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 9 Sensitive Security Parameters Management ### 9.1 Storage Areas Table 17: Storage Areas | Storage Area Name | Description | Persistence Type | |---------------------|-------------------------------------------------------------------------------------------------------------------------------------|--------------------| | RAM | Temporary storage for SSPs used by the module as part of service execution. The module does not perform persistent storage of SSPs. | Dynamic | SSPs are provided to the module by the calling application and are destroyed when released by the appropriate API function calls. The module does not perform persistent storage of SSPs. ### 9.2 SSP Input-Output Methods Table 18: SSP Input-Output Methods | Name | From | To | Format Type | Distribution Type | Entry Type | SFI or Algorithm | |-----------------------|--------------------------------------|--------------------------------------|---------------|---------------------|--------------|--------------------| | API input parameters | Operator calling application (TOEPP) | Cryptographic module | Plaintext | Manual | Electronic | | | API output parameters | Cryptographic module | Operator calling application (TOEPP) | Plaintext | Manual | Electronic | | The module only supports SSP entry and output to and from the calling application running on the same operational environment. This corresponds to manual distribution, electronic entry/output ('CM Software to/from App via TOEPP Path') per FIPS 140 -3 IG 9.5.A Table 1. There is no entry or output of cryptographically protected SSPs. ### 9.3 SSP Zeroization Methods | Zeroization Method | Description | Rationale | Operator Initiation | |----------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------| | Free cipher handle | Zeroizes the SSPs contained within the cipher handle: EVP_CIPHER_CTX_free() clears and frees symmetric cipher context, EVP_MAC_CTX_free() clears and frees MAC context, EVP_KDF_CTX_free() clears and frees KDF context, EVP_RAND_CTX_free() clears and frees DRBG context, EVP_PKEY_free() clears and frees asymmetric key pair structures | Memory occupied by SSPs is overwritten with zeroes and then it is released, which renders the SSP values irretrievable. The completion of the zeroization routine indicates that the | By calling the cipher related zeroization API | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 96 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 19: SSP Zeroization Methods | Zeroization Method | Description | Rationale | Operator Initiation | |----------------------|------------------------------------------------------------|-------------------------------------------------------------------------------------------------|---------------------------------------| | | | zeroization procedure succeeded. | | | Automatic | Automatically zeroized by the module when no longer needed | Memory occupied by SSPs is overwritten with zeroes, which renders the SSP values irretrievable. | N/A | | Module reset | De-allocates the volatile memory used to store SSPs | Volatile memory used by the module is overwritten within nanoseconds when power is removed. | By unloading and reloading the module | All data output is inhibited during zeroization. ### 9.4 SSPs | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |----------|-------------------------------------------------------------|-----------------------------------------|---------------------|----------------|------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------| | AES Key | Used for encryption, decryption, and message authentication | 128, 192, 256 bits - 128, 192, 256 bits | Symmetric key - CSP | | | Encryption with AES Decryption with AES Authenticated Encryption with AES Authenticated Decryption with AES Message Authentication Generation with AES | | HMAC Key | Used for hash- based message authentication | 112-524288 bits - 112-256 bits | Symmetric key - CSP | | | Message Authentication Generation with HMAC | | KMAC Key | Used for message authentication | 128-1024 bits - 112-256 bits | Symmetric key - CSP | | | Message Authentication Generation with KMAC | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 97 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |-----------------------|--------------------------------------------------------------------|------------------------------|---------------------|-----------------------------------|---------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Key- Derivation Key | Used for key derivation | 112-4096 bits - 112-256 bits | Symmetric key - CSP | | | Key Derivation with KBKDF | | Shared Secret | Generated by shared secret computation and used for key derivation | 224-8192 bits - 112-256 bits | Shared secret - CSP | | Shared Secret Computation | Key Derivation with KDA OneStep Key Derivation with KDA TwoStep Key Derivation with KDA HKDF Key Derivation with ANS X9.42 KDF Key Derivation with X9.63 KDF Key Derivation with SSH KDF Key Derivation with TLS 1.2 KDF Key Derivation with TLS 1.3 | | Password | Used for password- based key derivation | At least 8 characters - N/A | Password - CSP | | | KDF Key Derivation with PBKDF2 | | PBKDF Derived Key | Generated by password- based key derivation | 112-4096 bits - 112-256 bits | Symmetric key - CSP | Key Derivation with PBKDF2 | | | | KBKDF Derived Key | Generated by key-based key derivation | 112-4096 bits - 112-256 bits | Symmetric key - CSP | Key Derivation with KBKDF | | | | ANS X9.42 Derived Key | Generated by ANS X9.42 key derivation | 128-4096 bits - 112-256 bits | Symmetric key - CSP | Key Derivation with ANS X9.42 KDF | | | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 98 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |-------------------------|------------------------------------------------------------------------------|------------------------------------------------------------------------------------------------------|---------------------|-----------------------------------------------------------------|------------------|------------------------------------| | ANS X9.63 Derived Key | Generated by ANS X9.63 key derivation | 128-4096 bits - 112-256 bits | Symmetric key - CSP | Key Derivation with X9.63 KDF | | | | HKDF Derived Key | Generated by HKDF key derivation | 224-8192 bits - 112-256 bits | Symmetric key - CSP | Key Derivation with KDA HKDF | | | | KDA OneStep Derived Key | Generated by OneStep KDA key derivation | 2048 bits - 112- 256 bits | Symmetric key - CSP | Key Derivation with KDA OneStep | | | | KDA TwoStep Derived Key | Generated by TwoStep KDA key derivation | 2048 bits - 112- 256 bits | Symmetric key - CSP | Key Derivation with KDA TwoStep | | | | TLS Derived Key | Generated by TLS KDF key derivation | 112-1024 bits - 112-256 bits | Symmetric key - CSP | Key Derivation with TLS 1.2 KDF Key Derivation with TLS 1.3 KDF | | | | SSH KDF Derived Key | Generated by SSH KDF key derivation | 112-256 bits - 112-256 bits | Symmetric key - CSP | Key Derivation with SSH KDF | | | | Entropy Input | Used for random number generation and seeding a DRBG (compliant with IG D.L) | 128-384 bits - 128-384 bits | Entropy input - CSP | | | Random Number Generation with DRBG | | DRBG Seed | Used for random number generation (compliant with IG D.L) | Counter DRBG: 256, 320, 348 bits; Hash_DRBG: 440, 888 bits; HMAC DRBG: 320, 512, 1024 bits - Counter | Seed - CSP | Random Number Generation with DRBG | | Random Number Generation with DRBG | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 99 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |------------------------------|-----------------------------------------------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------|----------------------|------------------------------------|------------------|--------------------------------------------------------------------------------------------------| | | | DRBG: 128, 192, 256 bits; Hash_DRBG: 128, 256 bits; HMAC DRBG: 128, 256 bits | | | | | | DRBG Internal State (V, Key) | Used for random number generation (compliant with IG D.L) | Counter DRBG: 256, 320, 348 bits; HMAC DRBG: 320, 512, 1024 bits - Counter DRBG: 128, 192, 256 bits; HMAC DRBG: 128, 256 bits | Internal state - CSP | Random Number Generation with DRBG | | Random Number Generation with DRBG | | DRBG Internal State (V, C) | Used for random number generation (compliant with IG D.L) | 880, 1776 bits - 128, 256 bits | Internal state - CSP | Random Number Generation with DRBG | | Random Number Generation with DRBG | | DH Private Key | Used for shared secret computation and key pair verification | 2048-8192 bits - 112-200 bits | Private key - CSP | | | Key Pair Verification with Safe Primes Shared Secret Computation | | DH Public Key | Used for shared secret computation and key pair verification | 2048-8192 bits - 112-200 bits | Public key - PSP | | | Key Pair Verification with Safe Primes Shared Secret Computation | | EC Private Key | Used for shared secret computation, digital signature generation, key pair verification | P-224, P-256, P- 384, P-521, K- 233, K-283, K- 409, K-571, B- 233, B-283, B- 409, B-571 bits - 112-256 bits | Private key - CSP | | | Signature Generation with ECDSA Shared Secret Computation Key Encapsulation with Hybrid- ML-KEM- | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 100 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |---------------------------------|---------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------|-------------------|--------------------------------------|------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | | | ECDH Key Decapsulation with Hybrid- ML-KEM- ECDH | | EC Public Key | Used for shared secret computation, signature verification, and key pair verification | P-192, P-224, P- 256, P-384, P- 521, K-163, K- 233, K-283, K- 409, K-571, B- 163, B-233, B- 283, B-409, B-571 bits - 80-256 bits | Public key - PSP | | | Signature Verification with ECDSA Public Key Verification with ECDSA Shared Secret Computation Key Encapsulation with Hybrid- ML-KEM- ECDH Key Decapsulation with Hybrid- ML-KEM- ECDH | | RSA Private Key | Used for signature generation | 2048-16384 bits - 112-256 bits | Private key - CSP | | | Signature Generation with RSA Shared Secret Computation RSA key un- encapsulation | | RSA Public Key | Used for signature verification | 2048-16384 bits - 112-256 bits | Public key - PSP | | | Signature Verification with RSA Shared Secret Computation RSA key encapsulation | | Module Generated DH Private Key | DH private key generated by the module | 2048-8192 bits - 112-200 bits | Private key - CSP | Key Pair Generation with Safe Primes | | | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 101 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |-----------------------------------|-----------------------------------------|---------------------------------------------|--------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | Module Generated DH Public Key | DH public key generated by the module | 2048-8192 bits - 112-200 bits | Public key - PSP | Key Pair Generation with Safe Primes | | | | Module Generated EC Private Key | EC private key generated by the module | P-224, P-256, P- 384, P-521 - 112- 256 bits | Private key - CSP | Key Pair Generation with ECDSA | | | | Module Generated EC Public Key | EC public key generated by the module | P-224, P-256, P- 384, P-521 - 112- 256 bits | Public key - PSP | Key Pair Generation with ECDSA | | | | Module Generated RSA Private Key | RSA private key generated by the module | 2048-16384 bits - 112-256 bits | Private key - CSP | Key Pair Generation with RSA | | | | Module Generated RSA Public Key | RSA public key generated by the module | 2048-16384 bits - 112-256 bits | Public key - PSP | Key Pair Generation with RSA | | | | Intermediate Key Generation Value | Used for key pair generation | 224-16384 bits - 112-256 bits | Intermediate value - CSP | Key Pair Generation with ECDSA Key Pair Generation with RSA Key Pair Generation with Safe Primes Key Generation with ML- KEM Key Generation with ML-DSA Key Generation with SLH- DSA Key Generation with KEM- Hybrid-MLX- | | Key Pair Generation with ECDSA Key Pair Generation with RSA Key Pair Generation with Safe Primes Key Generation with ML-KEM Key Generation with ML-DSA Key Generation with SLH-DSA Key Generation with KEM- Hybrid-MLX- KEM Key | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 102 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |--------------------|---------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------|-------------------------|------------------------------------------------------------------------|------------------|----------------------------------------------------------------| | | | | | KEM Key Generation with Hybrid- ML-KEM- ECDH EdDSA Key Pair Generation | | Generation with Hybrid- ML-KEM- ECDH EdDSA Key Pair Generation | | ML-DSA Public Key | Used for signature verification | ML-DSA-44: 10496 bits; ML- DSA-65: 15616 bits; ML-DSA-87: 20736 bits - ML- DSA-44: 128 bits; ML-DSA-65: 192 bits; ML-DSA-87: 256 bits | Public key - PSP | | | Signature Verification with SLH-DSA | | ML-DSA Private Key | Used for signature generation | ML-DSA-44: 20480 bits; ML- DSA-65: 32256 bits; ML-DSA-87: 39168 bits - ML- DSA-44: 128 bits; ML-DSA-65: 192 bits; ML-DSA-87: 256 bits | Private key - CSP | | | Signature Generation with ML-DSA | | ML-KEM Public Key | Used for key encapsulation | ML-KEM-512: 6400 bits; ML- KEM-768: 9472 bits; ML-KEM- 1024: 12544 bits - ML-KEM-512: 128 bits; ML- KEM-768: 192 bits; ML-KEM- 1024: 256 bits | Encapsulation key - PSP | | | Key Encapsulation with ML-KEM | | ML-KEM Private Key | Used for key decapsulation | ML-KEM-512: 13056 bits; ML- KEM-768: 19200 bits; ML-KEM- 1024: 25344 bits - ML-KEM-512: | Decapsulation key - CSP | | | Key Decapsulation with ML-KEM | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 103 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |--------------------|---------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------|----------------|------------------|-------------------------------------| | | | 128 bits; ML- KEM-768: 192 bits; ML-KEM- 1024: 256 bits | | | | | | SLH-DSA Public Key | Used for signature verification | SLH-DSA-SHA2- 128s, SLH-DSA- SHA2-128f, SLH- DSA-SHAKE- 128s, SLH-DSA- SHAKE-128f: 256 bits; SLH-DSA- SHA2-192s, SLH- DSA-SHA2-192f, SLH-DSA- SHAKE-192s, SLH-DSA- SHAKE-192f: 384 bits; SLH-DSA- SHA2-256s, SLH- DSA-SHA2-256f, SLH-DSA- SHAKE-256s, SLH-DSA- SHAKE-256f: 512 bits - SLH-DSA- SHA2-128s, SLH- DSA-SHA2-128f, SLH-DSA- SHAKE-128s, SLH-DSA- SHAKE-128f: 128 bits; SLH-DSA- SHA2-192s, SLH- DSA-SHA2-192f, SLH-DSA- SHAKE-192s, SLH-DSA- SHAKE-192f: 192 bits; SLH-DSA- SHA2-256s, SLH- DSA-SHA2-256f, SLH-DSA- SHAKE-256s, SLH-DSA- | Public key - PSP | | | Signature Verification with SLH-DSA | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 104 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |---------------------|-------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------|----------------|------------------|-----------------------------------| | | | SHAKE-256f: 256 bits | | | | | | SLH-DSA Private Key | Used for signature generation | SLH-DSA-SHA2- 128s, SLH-DSA- SHA2-128f, SLH- DSA-SHAKE- 128s, SLH-DSA- SHAKE-128f: 512 bits; SLH-DSA- SHA2-192s, SLH- DSA-SHA2-192f, SLH-DSA- SHAKE-192s, SLH-DSA- SHAKE-192f: 768 bits; SLH-DSA- SHA2-256s, SLH- DSA-SHA2-256f, SLH-DSA- SHAKE-256s, SLH-DSA- SHAKE-256f: 1024 bits - SLH- DSA-SHA2-128s, SLH-DSA-SHA2- 128f, SLH-DSA- SHAKE-128s, SLH-DSA- SHAKE-128f: 128 bits; SLH-DSA- SHA2-192s, SLH- DSA-SHA2-192f, SLH-DSA- SHAKE-192s, SLH-DSA- SHAKE-192f: 192 bits; SLH-DSA- SHA2-256s, SLH- DSA-SHA2-256f, SLH-DSA- SHAKE-256s, SLH-DSA- SHAKE-256f: 256 bits | Private key - CSP | | | Signature Generation with SLH-DSA | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 105 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |-------------------------------------|---------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------|-------------------------|------------------------------|------------------|-----------| | Module Generated ML-DSA Public Key | Used for signature verification | ML-DSA-44: 10496 bits; ML- DSA-65: 15616 bits; ML-DSA-87: 20736 bits - ML- DSA-44: 128 bits; ML-DSA-65: 192 bits; ML-DSA-87: 256 bits | Public key - PSP | Key Generation with ML-DSA | | | | Module Generated ML-DSA Private Key | Used for signature generation | ML-DSA-44: 20480 bits; ML- DSA-65: 32256 bits; ML-DSA-87: 39168 bits - ML- DSA-44: 128 bits; ML-DSA-65: 192 bits; ML-DSA-87: 256 bits | Private key - CSP | Key Generation with ML-DSA | | | | Module Generated ML-KEM Public Key | Used for key encapsulation | ML-KEM-512: 6400 bits; ML- KEM-768: 9472 bits; ML-KEM- 1024: 12544 bits - ML-KEM-512: 128 bits; ML- KEM-768: 192 bits; ML-KEM- 1024: 256 bits | Encapsulation key - PSP | Key Generation with ML- KEM | | | | Module Generated ML-KEM Private Key | Used for key decapsulation | ML-KEM-512: 13056 bits; ML- KEM-768: 19200 bits; ML-KEM- 1024: 25344 bits - ML-KEM-512: 128 bits; ML- KEM-768: 192 bits; ML-KEM- 1024: 256 bits | Decapsulation key - CSP | Key Generation with ML- KEM | | | | Module Generated SLH-DSA Public Key | Used for signature verification | SLH-DSA-SHA2- 128s, SLH-DSA- SHA2-128f, SLH- DSA-SHAKE- 128s, SLH-DSA- | Public key - PSP | Key Generation with SLH- DSA | | | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 106 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |--------------------------------------|-------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------|------------------------------|------------------|-----------| | | | SHAKE-128f: 256 bits; SLH-DSA- SHA2-192s, SLH- DSA-SHA2-192f, SLH-DSA- SHAKE-192s, SLH-DSA- SHAKE-192f: 384 bits; SLH-DSA- SHA2-256s, SLH- DSA-SHA2-256f, SLH-DSA- SHAKE-256s, SLH-DSA- SHAKE-256f: 512 bits - SLH-DSA- SHA2-128s, SLH- DSA-SHA2-128f, SLH-DSA- SHAKE-128s, SLH-DSA- SHAKE-128f: 128 bits; SLH-DSA- SHA2-192s, SLH- DSA-SHA2-192f, SLH-DSA- SHAKE-192s, SLH-DSA- SHAKE-192f: 192 bits; SLH-DSA- SHA2-256s, SLH- DSA-SHA2-256f, SLH-DSA- SHAKE-256s, SLH-DSA- SHAKE-256f: 256 bits | | | | | | Module Generated SLH-DSA Private Key | Used for signature generation | SLH-DSA-SHA2- 128s, SLH-DSA- SHA2-128f, SLH- DSA-SHAKE- 128s, SLH-DSA- SHAKE-128f: 512 bits; SLH-DSA- | Private key - CSP | Key Generation with SLH- DSA | | | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 107 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |-------------|------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------|------------------------------------|------------------|---------------------------------------------------------------------| | | | SHA2-192s, SLH- DSA-SHA2-192f, SLH-DSA- SHAKE-192s, SLH-DSA- SHAKE-192f: 768 bits; SLH-DSA- SHA2-256s, SLH- DSA-SHA2-256f, SLH-DSA- SHAKE-256s, SLH-DSA- SHAKE-256f: 1024 bits - SLH- DSA-SHA2-128s, SLH-DSA-SHA2- 128f, SLH-DSA- SHAKE-128s, SLH-DSA- SHAKE-128f: 128 bits; SLH-DSA- SHA2-192s, SLH- DSA-SHA2-192f, SLH-DSA- SHAKE-192s, SLH-DSA- SHAKE-192f: 192 bits; SLH-DSA- SHA2-256s, SLH- DSA-SHA2-256f, SLH-DSA- SHAKE-256s, SLH-DSA- SHAKE-256f: 256 | | | | | | ML-KEM Seed | Seed used for Key Generation with ML-KEM | bits 512 bits - ML- KEM-512: 128 bits; ML-KEM- 768: 192 bits; ML-KEM-1024: 256 bits | Seed - CSP | Random Number Generation with DRBG | | Key Generation with ML-KEM Key Generation with KEM- Hybrid-MLX- KEM | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 108 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |----------------------|-------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|---------------------|------------------------------------|---------------------------------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | ML-DSA Seed | Seed used for Key Generation with ML-DSA | 256 bits - ML- DSA-44: 128 bits; ML-DSA-65: 192 bits; ML-DSA-87: 256 bits | Seed - CSP | Random Number Generation with DRBG | | Key Generation with ML-DSA | | SLH-DSA Seed | Seed used for Key Generation with SLH-DSA | 384, 576, 768 bits - SLH-DSA- SHA2-128s, SLH- DSA-SHA2-128f, SLH-DSA- SHAKE-128s, SLH-DSA- SHAKE-128f: 128 bits; SLH-DSA- SHA2-192s, SLH- DSA-SHA2-192f, SLH-DSA- SHAKE-192s, SLH-DSA- SHAKE-192f: 192 bits; SLH-DSA- SHA2-256s, SLH- DSA-SHA2-256f, SLH-DSA- SHAKE-256s, SLH-DSA- SHAKE-256f: 256 | Seed - CSP | Random Number Generation with DRBG | | Key Generation with SLH-DSA | | ML-KEM Shared Secret | Shared secret used in ML- KEM | bits 256 bits - ML- KEM-512: 128 bits; ML-KEM- 768: 192 bits; ML-KEM-1024: 256 bits | Shared secret - CSP | | Key Encapsulation with ML- KEM Key Decapsulation with ML- KEM | Key Derivation with KBKDF Key Derivation with KDA OneStep Key Derivation with KDA TwoStep Key Derivation with KDA HKDF Key Derivation with ANS X9.42 KDF Key Derivation with X9.63 | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 109 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |--------------------------------------------------------|---------------------------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------|-------------------------|------------------------------|-----------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------| | | | | | | | KDF Key Derivation with SSH KDF Key Derivation with TLS 1.2 KDF Key Derivation with TLS 1.3 KDF Key Derivation with PBKDF2 | | Concatenated hybrid shared secret (ML- KEM and X25519) | Shared secret output by KEM-Hybrid- MLX-KEM | 512 bits - ML- KEM-512: 128 bits; ML-KEM- 768: 192 bits; ML-KEM-1024: 256 bits | Shared secret - CSP | | Key Encapsulation with KEM- Hybrid-MLX- KEM Key Decapsulation with KEM- Hybrid-MLX- KEM | Key Derivation with KDA HKDF | | Concatenated hybrid shared secret (ML- KEM and ECDH) | Shared secret output by Hybrid-ML- KEM-ECDH | ML-KEM with ECDH P-256: 512 bits; ML-KEM with ECDH P- 384: 640 bits - ML-KEM-512: 128 bits; ML- KEM-768: 192 bits; ML-KEM- 1024: 256 bits | Shared secret - CSP | | Key Encapsulation with Hybrid- ML-KEM- ECDH Key Decapsulation with Hybrid- ML-KEM- ECDH | Key Derivation with KDA HKDF | | Hybrid ML- KEM Shared Secret Key | Shared secret key post combining via the approved HKDF key combiner | 224-8192 bits - 112-256 bits | Shared secret key - CSP | Key Derivation with KDA HKDF | | | | EdDSA public key | Used in digital signature verification and key verification | Ed25519, Ed448 - 128, 224 bits | Public key - PSP | | | Signature Verification with EdDSA Verification of EdDSA Public Key | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 110 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 20: SSP Table 1 | Name | Description | Size - Strength | Type - Category | Generated By | Established By | Used By | |------------------------------------|----------------------------------------------------------------|--------------------------------|-----------------------------|-----------------------------------------------------------------|------------------|---------------------------------------------------------------------| | EdDSA private key | Used in digital signature generation | Ed25519, Ed448 - 128, 224 bits | Private key - CSP | | | Signature Generation with EdDSA | | Module generated EdDSA public key | Used in digital signature verification and key verification | Ed25519, Ed448 - 128, 224 bits | Public key - PSP | EdDSA Key Pair Generation | | | | Module generated EdDSA private key | Used in digital signature generation | Ed25519, Ed448 - 128, 224 bits | Private key - CSP | EdDSA Key Pair Generation | | | | GCM IV | IV used for Authenticated encryption; Authenticated decryption | 96 bits - N/A | Initialization vector - PSP | Authenticated Encryption with AES | | Authenticated Encryption with AES Authenticated Decryption with AES | | TLS Master Secret | TLS Master Secret used for deriving the TLS Derived Secret | 384 bits - 112- 256 bits | Secret - CSP | Key Derivation with TLS 1.2 KDF Key Derivation with TLS 1.3 KDF | | Key Derivation with TLS 1.2 KDF Key Derivation with TLS 1.3 KDF | | Name | Input - Output | Storage | Storage Duration | Zeroization | Related SSPs | |----------|----------------------|---------------|-------------------------------------------------|---------------------------------|----------------| | AES Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | | | HMAC Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | | | KMAC Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 111 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Input - Output | Storage | Storage Duration | Zeroization | Related SSPs | |-------------------------|--------------------------------------------|---------------|-------------------------------------------------|---------------------------------|-----------------------------------------------------------------------------------------------------------------------| | Key-Derivation Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | KBKDF Derived Key:Derives | | Shared Secret | API input parameters API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | DH Private Key:Generated From DH Public Key:Generated From EC Private Key:Generated From EC Public Key:Generated From | | Password | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | PBKDF Derived Key:Derives | | PBKDF Derived Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Password:Derived From | | KBKDF Derived Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Key-Derivation Key:Derived From | | ANS X9.42 Derived Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Shared Secret:Derived From | | ANS X9.63 Derived Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Shared Secret:Derived From | | HKDF Derived Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Shared Secret:Derived From | | KDA OneStep Derived Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Shared Secret:Derived From | | KDA TwoStep Derived Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Shared Secret:Derived From | | TLS Derived Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | TLS Master Secret:Derived From | | SSH KDF Derived Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Shared Secret:Derived From | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 112 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Input - Output | Storage | Storage Duration | Zeroization | Related SSPs | |---------------------------------|-----------------------|---------------|-------------------------------------------------------------------------------------------------------|-------------------------------------------|----------------------------------------------------------------------------------------------------------| | Entropy Input | | RAM:Plaintext | Until the DRBG has completed instantiation or the module is reset | Automatic Module reset | DRBG Seed:Generates | | DRBG Seed | | RAM:Plaintext | Until the DRBG has completed instantiation or the module is reset | Automatic Module reset | DRBG Internal State (V, Key):Generates DRBG Internal State (V, C):Generates Entropy Input:Generated From | | DRBG Internal State (V, Key) | | RAM:Plaintext | Until the DRBG has been un-instantiation, or the cipher handle has been freed, or the module is reset | Free cipher handle Automatic Module reset | DRBG Seed:Generated From | | DRBG Internal State (V, C) | | RAM:Plaintext | Until the DRBG has been un-instantiation, or the cipher handle has been freed, or the module is reset | Free cipher handle Automatic Module reset | DRBG Seed:Generated From | | DH Private Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | DH Public Key:Paired With Shared Secret:Derives | | DH Public Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | DH Private Key:Paired With Shared Secret:Generates | | EC Private Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | EC Public Key:Paired With Shared Secret:Generates | | EC Public Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | EC Private Key:Paired With Shared Secret:Generates | | RSA Private Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | RSA Public Key:Paired With | | RSA Public Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | RSA Private Key:Paired With | | Module Generated DH Private Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated DH Public Key:Paired With Intermediate Key | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 113 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Input - Output | Storage | Storage Duration | Zeroization | Related SSPs | |-----------------------------------|-----------------------|---------------|-------------------------------------------------|---------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | | Generation Value:Generated From | | Module Generated DH Public Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated DH Private Key:Paired With Intermediate Key Generation Value:Generated From | | Module Generated EC Private Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated EC Public Key:Paired With Intermediate Key Generation Value:Generated From | | Module Generated EC Public Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated EC Private Key:Paired With Intermediate Key Generation Value:Generated From | | Module Generated RSA Private Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated RSA Public Key:Paired With Intermediate Key Generation Value:Generated From | | Module Generated RSA Public Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated RSA Private Key:Paired With Intermediate Key Generation Value:Generated From | | Intermediate Key Generation Value | | RAM:Plaintext | From service invocation to service completion | Automatic | Module Generated DH Private Key:Generates Module Generated DH Public Key:Generates Module Generated EC Private Key:Generates Module Generated EC Public Key:Generates Module Generated RSA Private Key:Generates Module Generated RSA Public Key:Generates Module generated EdDSA public key:Generates Module generated | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 114 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Input - Output | Storage | Storage Duration | Zeroization | Related SSPs | |-------------------------------------|-----------------------|---------------|-------------------------------------------------|---------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | | EdDSA private key:Generates Module Generated SLH- DSA Public Key:Generates Module Generated SLH- DSA Private Key:Generates Module Generated ML- DSA Public Key:Generates Module Generated ML- DSA Private Key:Generates Module Generated ML- KEM Public Key:Generates Module Generated ML- KEM Private Key:Generates | | ML-DSA Public Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | ML-DSA Private Key:Paired With | | ML-DSA Private Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | ML-DSA Public Key:Paired With | | ML-KEM Public Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | ML-KEM Private Key:Paired With Shared Secret:Encapsulates | | ML-KEM Private Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | ML-KEM Public Key:Paired With Shared Secret:Decapsulates | | SLH-DSA Public Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | SLH-DSA Private Key:Paired With | | SLH-DSA Private Key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | SLH-DSA Public Key:Paired With | | Module Generated ML- DSA Public Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated ML- DSA Private Key:Paired With | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 115 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Input - Output | Storage | Storage Duration | Zeroization | Related SSPs | |---------------------------------------|-----------------------|---------------|-------------------------------------------------|---------------------------------|------------------------------------------------------------------------------------------------------------------------------| | | | | | | ML-DSA Seed:Derived From Intermediate Key Generation Value:Generated from | | Module Generated ML- DSA Private Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated ML- DSA Public Key:Paired With ML-DSA Seed:Derived From Intermediate Key Generation Value:Generated from | | Module Generated ML- KEM Public Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated ML- KEM Private Key:Paired With ML-KEM Seed:Derived From Intermediate Key Generation Value:Generated from | | Module Generated ML- KEM Private Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated ML- KEM Public Key:Paired With ML-KEM Seed:Derived From Intermediate Key Generation Value:Generated from | | Module Generated SLH- DSA Public Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated SLH- DSA Private Key:Paired With SLH-DSA Seed:Derived From Intermediate Key Generation Value:Generated from | | Module Generated SLH- DSA Private Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module Generated SLH- DSA Public Key:Paired With SLH-DSA Seed:Derived From Intermediate Key | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 116 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Name | Input - Output | Storage | Storage Duration | Zeroization | Related SSPs | |-------------------------------------------------------|--------------------------------------------|---------------|--------------------------------------------------------------------------------------------------------------|-------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------| | | | | | | Generation Value:Generated from | | ML-KEM Seed | API output parameters | RAM:Plaintext | From service invocation to service completion, or until cipher handle is freed, or until the module is reset | Free cipher handle Automatic Module reset | Module Generated ML- KEM Private Key:Generates Module Generated ML- KEM Public Key:Generates | | ML-DSA Seed | API output parameters | RAM:Plaintext | From service invocation to service completion, or until cipher handle is freed, or until the module is reset | Free cipher handle Automatic Module reset | Module Generated ML- DSA Private Key:Generates Module Generated ML- DSA Public Key:Generates | | SLH-DSA Seed | | RAM:Plaintext | From service invocation to service completion | Automatic | Module Generated SLH- DSA Private Key:Generates Module Generated SLH- DSA Public Key:Generates | | ML-KEM Shared Secret | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | ML-KEM Public Key:Wrapped by ML-KEM Private Key:Unwrapped by | | Concatenated hybrid shared secret (ML-KEM and X25519) | API input parameters API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | ML-KEM Public Key:Wrapped by ML-KEM Private Key:Unwrapped by Hybrid ML-KEM Shared Secret Key:Used to derive | | Concatenated hybrid shared secret (ML-KEM and ECDH) | API input parameters API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | ML-KEM Public Key:Wrapped by ML-KEM Private Key:Unwrapped by EC Private Key:Derived from EC Public Key:Derived from Hybrid ML-KEM Shared Secret Key:Used to derive | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 117 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 21: SSP Table 2 | Name | Input - Output | Storage | Storage Duration | Zeroization | Related SSPs | |------------------------------------|--------------------------------------------|---------------|-------------------------------------------------|---------------------------------|-------------------------------------------------------------------------------------------------------------------------------------| | Hybrid ML-KEM Shared Secret Key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Concatenated hybrid shared secret (ML-KEM and X25519):Derived from Concatenated hybrid shared secret (ML-KEM and ECDH):Derived from | | EdDSA public key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | EdDSA private key:Paired With | | EdDSA private key | API input parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | EdDSA public key:Paired With | | Module generated EdDSA public key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module generated EdDSA private key:Paired With Intermediate Key Generation Value:Generated from | | Module generated EdDSA private key | API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | Module generated EdDSA public key:Paired With Intermediate Key Generation Value:Generated from | | GCM IV | API input parameters API output parameters | RAM:Plaintext | Until cipher handle is freed or module is reset | Free cipher handle Module reset | | | TLS Master Secret | | RAM:Plaintext | From service invocation to service completion | Automatic | TLS Derived Key:Derives | SSPs, including CSPs, are directly imported as input parameters and exported as output parameters from the module. Because these SSPs are only transiently used for a specific service, they are, by definition, exclusive between approved and non-approved services. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 118 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 10 Self-Tests While the module is executing the self-tests, services are not available, and data output (via the data output interface) is inhibited until the tests are successfully completed. The module does not return control to the calling application until the tests are completed. If any of these tests fail, the module transitions to the error state. ### 10.1 Pre-Operational Self-Tests Table 22: Pre-Operational Self-Tests | Algorithm or Test | Test Properties | Test Method | Test Type | Indicator | Details | |------------------------|-------------------|------------------------|-----------------|---------------------------------------------------------------|----------------------------| | HMAC-SHA2- 256 (A7583) | 256-bit key | Message Authentication | SW/FW Integrity | Module becomes operational and services are available for use | Integrity test for fips.so | | HMAC-SHA2- 256 (A7584) | 256-bit key | Message Authentication | SW/FW Integrity | Module becomes operational and services are available for use | Integrity test for fips.so | | HMAC-SHA2- 256 (A7591) | 256-bit key | Message Authentication | SW/FW Integrity | Module becomes operational and services are available for use | Integrity test for fips.so | | HMAC-SHA2- 256 (A7604) | 256-bit key | Message Authentication | SW/FW Integrity | Module becomes operational and services are available for use | Integrity test for fips.so | | HMAC-SHA2- 256 (A7606) | 256-bit key | Message Authentication | SW/FW Integrity | Module becomes operational and services are available for use | Integrity test for fips.so | | HMAC-SHA2- 256 (A7608) | 256-bit key | Message Authentication | SW/FW Integrity | Module becomes operational and services are available for use | Integrity test for fips.so | | HMAC-SHA2- 256 (A7614) | 256-bit key | Message Authentication | SW/FW Integrity | Module becomes operational and services are available for use | Integrity test for fips.so | The pre-operational software integrity test is performed automatically when the module is powered on, before the module transitions to the operational state. If the software integrity test fails, the module transitions to the error state. The HMAC and SHA2-256 algorithms go through their respective CASTs before the software integrity test is performed. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 119 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ### 10.2 Conditional Self-Tests | Algorithm or Test | Test Properties | Test Method | Test Type | Indicator | Details | Conditions | |---------------------|---------------------------|---------------|-------------|---------------------------------------------------------------|------------------------------------------------------------------------------------------------------------------------|-------------------------------------------------| | AES-ECB | Decrypt with 128- bit key | KAT | CAST | Module becomes operational and services are available for use | Symmetric operation | Test runs at power-on before the integrity test | | AES-GCM Encryption | Encrypt with 256-bit key | KAT | CAST | Module becomes operational and services are available for use | Symmetric operation | Test runs at power-on before the integrity test | | AES-GCM Decryption | Decrypt with 256- bit key | KAT | CAST | Module becomes operational and services are available for use | Symmetric operation | Test runs at power-on before the integrity test | | SHA2-512 | 3-byte message | KAT | CAST | Module becomes operational and services are available for use | Message digest | Test runs at power-on before the integrity test | | SHA3-256 | 4-byte message | KAT | CAST | Module becomes operational and services are available for use | Message digest | Test runs at power-on before the integrity test | | Counter DRBG | 128 bit keys, DF, with PR | KAT | CAST | Module becomes operational and services are available for use | Compliant with SP 800-90Ar1 including health test per section 11.3: performs instantiation, reseeding, and generation. | Test runs at power-on before the integrity test | | HMAC DRBG | HMAC-SHA-256, with PR | KAT | CAST | Module becomes operational | Compliant with SP 800-90Ar1 including health test per | Test runs at power-on | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 120 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm or Test | Test Properties | Test Method | Test Type | Indicator | Details | Conditions | |-------------------------|-----------------------------------------------------------|---------------|-------------|---------------------------------------------------------------|------------------------------------------------------------------|-------------------------------------------------| | | | | | and services are available for use | section 11.3: performs instantiation, reseeding, and generation. | before the integrity test | | KAS-ECC-SSC Sp800-56Ar3 | P-256 curve | KAT | CAST | Module becomes operational and services are available for use | Shared secret computation | Test runs at power-on before the integrity test | | KAS-FFC-SSC Sp800-56Ar3 | ffdhe2048 | KAT | CAST | Module becomes operational and services are available for use | Shared secret computation | Test runs at power-on before the integrity test | | KDF SP800-108 | HMAC-SHA2-256 with 128-bit key; KMAC-128 with 128-bit key | KAT | CAST | Module becomes operational and services are available for use | Key based key derivation | Test runs at power-on before the integrity test | | KDA OneStep SP800-56Cr2 | SHA2-256 | KAT | CAST | Module becomes operational and services are available for use | Shared secret key derivation | Test runs at power-on before the integrity test | | KDF ANS 9.42 | SHA-256 | KAT | CAST | Module becomes operational and services are available for use | Industry-based ANS X9.42 key derivation | Test runs at power-on before the integrity test | | KDF ANS 9.63 | SHA2-256 | KAT | CAST | Module becomes operational and services are available for use | Industry-based ANS X9.63 key derivation | Test runs at power-on before the integrity test | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 121 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm or Test | Test Properties | Test Method | Test Type | Indicator | Details | Conditions | |--------------------------|----------------------------------------------------------------------------------------------------|---------------|-------------|---------------------------------------------------------------|--------------------------------------------|-------------------------------------------------| | TLS v1.2 KDF RFC7627 | SHA2-256 | KAT | CAST | Module becomes operational and services are available for use | Industry-based TLS v1.2 KDF key derivation | Test runs at power-on before the integrity test | | TLS v1.3 KDF | SHA2-256 | KAT | CAST | Module becomes operational and services are available for use | Industry-based TLS v1.3 KDF key derivation | Test runs at power-on before the integrity test | | PBKDF | HMAC-SHA2-256 with 200-bit derived key length, 24- character password, 2 iterations , 288-bit salt | KAT | CAST | Module becomes operational and services are available for use | Password-based key derivation | Test runs at power-on before the integrity test | | KDA HKDF SP800-56Cr2 | SHA2-256 | KAT | CAST | Module becomes operational and services are available for use | Shared secret key derivation | Test runs at power-on before the integrity test | | ECDSA SigGen (FIPS186-5) | P-224 with SHA2- 256 | KAT | CAST | Module becomes operational and services are available for use | Digital signature generation | Test runs at power-on before the integrity test | | ECDSA SigVer (FIPS186-5) | P-224 with SHA2- 256 | KAT | CAST | Module becomes operational and services are available for use | Digital signature verification | Test runs at power-on before the integrity test | | RSA SigGen (FIPS186-5) | PKCS#1 v1.5 with 2048 bit key and SHA2-256 | KAT | CAST | Module becomes operational and services are available for use | Digital signature generation | Test runs at power-on before the integrity test | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 122 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm or Test | Test Properties | Test Method | Test Type | Indicator | Details | Conditions | |----------------------------|--------------------------------------------|---------------|-------------|---------------------------------------------------------------|------------------------------------------------------------------------------------------------------------------------|-------------------------------------------------| | EDDSA SigGen (FIPS186-5) | Ed25519; Ed4488 | KAT | CAST | Module becomes operational and services are available for use | Digital signature generation | Test runs at power-on before the integrity test | | RSA SigVer (FIPS186-5) | PKCS#1 v1.5 with 2048 bit key and SHA2-256 | KAT | CAST | Module becomes operational and services are available for use | Digital signature verification | Test runs at power-on before the integrity test | | EDDSA SigVer (FIPS186-5) | Ed25519; Ed4488 | KAT | CAST | Module becomes operational and services are available for use | Digital signature verification | Test runs at power-on before the integrity test | | ECDSA KeyGen (FIPS186-5) | SHA2-512 | PCT | PCT | Successful key pair generation | Signature generation & verification | Key pair generation | | EDDSA KeyGen (FIPS186-5) | N/A | PCT | PCT | Successful key pair generation | Signature generation & verification | Key pair generation | | RSA KeyGen (FIPS186-5) | Section 6.4.1.1 of SP800-56Br2 | PCT | PCT | Successful key pair generation | Encryption & decryption | Key pair generation | | Safe Primes Key Generation | Section 5.6.2.1.4 of SP800-56Arev3 | PCT | PCT | Successful key pair generation | SP 800-56ARev3, 5.6.2.1.4 | Key pair generation | | Hash DRBG | SHA2-256, with PR | KAT | CAST | Module becomes operational and services are available for use | Compliant with SP 800-90Ar1 including health test per section 11.3: performs instantiation, reseeding, and generation. | Test runs at power-on before the integrity test | | ML-KEM KeyGen PCT | N/A | PCT | PCT | Successful key pair generation | Key encapsulation & decapsulation | Key pair generation | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 123 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm or Test | Test Properties | Test Method | Test Type | Indicator | Details | Conditions | |---------------------------|------------------------------------------------------------------------------------------------------|---------------|-------------|---------------------------------------------------------------|-------------------------------------|-------------------------------------------------| | ML-KEM Encapsulation | ML-KEM-512, encap KAT | KAT | CAST | Module becomes operational and services are available for use | Key encapsulation | Test runs at power-on before the integrity test | | ML-KEM Decapsulation | ML-KEM-512, decap KAT: implicit rejection path and non-rejection path | KAT | CAST | Module becomes operational and services are available for use | Key decapsulation | Test runs at power-on before the integrity test | | ML-DSA KeyGen PCT | N/A | PCT | PCT | Successful key pair generation | Signature generation & verification | Key pair generation | | ML-DSA SigGen | ML-DSA-65 (internal interface, covering all rejection paths for ML-DSA- 65 per Note 23 of IG 10.3.A) | KAT | CAST | Module becomes operational and services are available for use | Signature generation | Test runs at power-on before the integrity test | | ML-DSA SigVer | ML-DSA-65 (internal interface) | KAT | CAST | Module becomes operational and services are available for use | Signature verification | Test runs at power-on before the integrity test | | SLH-DSA KeyGen PCT | N/A | PCT | PCT | Successful key pair generation | Signature generation & verification | Key pair generation | | SLH-DSA SigGen with SHA2 | SLH-DSA-SHA2- 128f, external signature interface | KAT | CAST | Module becomes operational and services are available for use | Signature generation | Test runs at power-on before the integrity test | | SLH-DSA SigGen with SHAKE | SLH-DSA-SHAKE- 128f, external signature interface | KAT | CAST | Module becomes operational and services are available for use | Signature generation | Test runs at power-on before the integrity test | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 124 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | Algorithm or Test | Test Properties | Test Method | Test Type | Indicator | Details | Conditions | |--------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------|---------------|-------------|---------------------------------------------------------------|-------------------------------|-------------------------------------------------| | SLH-DSA SigVer with SHA2 | SLH-DSA-SHA2- 128f, external signature interface | KAT | CAST | Module becomes operational and services are available for use | Signature verification | Test runs at power-on before the integrity test | | SLH-DSA SigVer with SHAKE | SLH-DSA-SHAKE- 128f, external signature interface | KAT | CAST | Module becomes operational and services are available for use | Signature verification | Test runs at power-on before the integrity test | | Deterministic ECDSA SigGen (FIPS186-5) | P-224, SHA2-256 | KAT | CAST | Module becomes operational and services are available for use | Signature generation | Test runs at power-on before the integrity test | | ML-KEM KeyGen KAT | ML-KEM-512 | KAT | CAST | Module becomes operational and services are available for use | Key generation | Test runs at power-on before the integrity test | | ML-DSA KeyGen KAT | ML-DSA-65 | KAT | CAST | Module becomes operational and services are available for use | Key generation | Test runs at power-on before the integrity test | | SLH-DSA KeyGen KAT | SLH-DSA-SHA2- 128f | KAT | CAST | Module becomes operational and services are available for use | Key generation | Test runs at power-on before the integrity test | | Entropy Source - RCT and APT start-up test | 1024 samples. Repetition count test according to Section 4.4.1 and Adaptive proportion test according to Section 4.4.2 of SP 800-90B | RCT and APT | CAST | Module becomes operational and services are available for use | Entropy source start- up test | Entropy source initialization | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 125 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 23: Conditional Self-Tests | Algorithm or Test | Test Properties | Test Method | Test Type | Indicator | Details | Conditions | |----------------------------------------------|------------------------------------------------------------------------------------------------------------------------|---------------|-------------|-------------------------------|--------------------------------|--------------------------------------------------| | Entropy Source - RCT and APT continuous test | Repetition count test according to Section 4.4.1 and Adaptive proportion test according to Section 4.4.2 of SP 800-90B | RCT and APT | CAST | Entropy source is operational | Entropy source continuous test | Continuously when the entropy source is accessed | ### 10.3 Periodic Self-Test Information Table 24: Pre-Operational Periodic Information | Algorithm or Test | Test Method | Test Type | Period | Periodic Method | |-----------------------|------------------------|-----------------|-----------|-------------------| | HMAC-SHA2-256 (A7583) | Message Authentication | SW/FW Integrity | On demand | Manually | | HMAC-SHA2-256 (A7584) | Message Authentication | SW/FW Integrity | On demand | Manually | | HMAC-SHA2-256 (A7591) | Message Authentication | SW/FW Integrity | On demand | Manually | | HMAC-SHA2-256 (A7604) | Message Authentication | SW/FW Integrity | On demand | Manually | | HMAC-SHA2-256 (A7606) | Message Authentication | SW/FW Integrity | On demand | Manually | | HMAC-SHA2-256 (A7608) | Message Authentication | SW/FW Integrity | On demand | Manually | | HMAC-SHA2-256 (A7614) | Message Authentication | SW/FW Integrity | On demand | Manually | | Algorithm or Test | Test Method | Test Type | Period | Periodic Method | |-------------------------|---------------|-------------|-----------|-------------------| | AES-ECB | KAT | CAST | On Demand | Manually | | AES-GCM Encryption | KAT | CAST | On Demand | Manually | | AES-GCM Decryption | KAT | CAST | On Demand | Manually | | SHA2-512 | KAT | CAST | On Demand | Manually | | SHA3-256 | KAT | CAST | On Demand | Manually | | Counter DRBG | KAT | CAST | On Demand | Manually | | HMAC DRBG | KAT | CAST | On Demand | Manually | | KAS-ECC-SSC Sp800-56Ar3 | KAT | CAST | On Demand | Manually | | KAS-FFC-SSC Sp800-56Ar3 | KAT | CAST | On Demand | Manually | | KDF SP800-108 | KAT | CAST | On Demand | Manually | | KDA OneStep SP800-56Cr2 | KAT | CAST | On Demand | Manually | | KDF ANS 9.42 | KAT | CAST | On Demand | Manually | | KDF ANS 9.63 | KAT | CAST | On Demand | Manually | | TLS v1.2 KDF RFC7627 | KAT | CAST | On Demand | Manually | | TLS v1.3 KDF | KAT | CAST | On Demand | Manually | | PBKDF | KAT | CAST | On Demand | Manually | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 126 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 25: Conditional Periodic Information | Algorithm or Test | Test Method | Test Type | Period | Periodic Method | |----------------------------------------------|---------------|-------------|-----------|-------------------| | KDA HKDF SP800-56Cr2 | KAT | CAST | On Demand | Manually | | ECDSA SigGen (FIPS186-5) | KAT | CAST | On Demand | Manually | | ECDSA SigVer (FIPS186-5) | KAT | CAST | On Demand | Manually | | RSA SigGen (FIPS186-5) | KAT | CAST | On Demand | Manually | | EDDSA SigGen (FIPS186-5) | KAT | CAST | On Demand | Manually | | RSA SigVer (FIPS186-5) | KAT | CAST | On Demand | Manually | | EDDSA SigVer (FIPS186-5) | KAT | CAST | On Demand | Manually | | ECDSA KeyGen (FIPS186-5) | PCT | PCT | On Demand | Manually | | EDDSA KeyGen (FIPS186-5) | PCT | PCT | On Demand | Manually | | RSA KeyGen (FIPS186-5) | PCT | PCT | On Demand | Manually | | Safe Primes Key Generation | PCT | PCT | On Demand | Manually | | Hash DRBG | KAT | CAST | On Demand | Manually | | ML-KEM KeyGen PCT | PCT | PCT | On Demand | Manually | | ML-KEM Encapsulation | KAT | CAST | On Demand | Manually | | ML-KEM Decapsulation | KAT | CAST | On Demand | Manually | | ML-DSA KeyGen PCT | PCT | PCT | On Demand | Manually | | ML-DSA SigGen | KAT | CAST | On Demand | Manually | | ML-DSA SigVer | KAT | CAST | On Demand | Manually | | SLH-DSA KeyGen PCT | PCT | PCT | On Demand | Manually | | SLH-DSA SigGen with SHA2 | KAT | CAST | On Demand | Manually | | SLH-DSA SigGen with SHAKE | KAT | CAST | On Demand | Manually | | SLH-DSA SigVer with SHA2 | KAT | CAST | On Demand | Manually | | SLH-DSA SigVer with SHAKE | KAT | CAST | On Demand | Manually | | Deterministic ECDSA SigGen (FIPS186-5) | KAT | CAST | On Demand | Manually | | ML-KEM KeyGen KAT | KAT | CAST | On Demand | Manually | | ML-DSA KeyGen KAT | KAT | CAST | On Demand | Manually | | SLH-DSA KeyGen KAT | KAT | CAST | On Demand | Manually | | Entropy Source - RCT and APT start-up test | RCT and APT | CAST | On Demand | Manually | | Entropy Source - RCT and APT continuous test | RCT and APT | CAST | On Demand | Manually | ### 10.4 Error States | Name | Description | Conditions | Recovery Method | Indicator | |-----------------|--------------------------------------------------------------|---------------------------------|---------------------------------|----------------------| | Power- up error | An error occurred during the self-tests executed on power-up | Software integrity test failure | Re-initialization of the module | Module will not load | © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 127 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy Table 26: Error States | Name | Description | Conditions | Recovery Method | Indicator | |----------------|----------------------------------------------------------------------------------|---------------------------------------------------|---------------------------------|--------------------------------------------------------| | | | CAST failure | | | | Run-time error | An error occurred during a PCT or an entropy source health test failure occurred | PCT failure or entropy source health test failure | Re-initialization of the module | Cryptographic functionality and data output is blocked | In any error state, the output interface is inhibited, and the module cannot perform cryptographic operations. ### 10.5 Operator Initiation of Self-Tests The software integrity test and cryptographic algorithm self-tests can be invoked on demand by unloading and subsequently re-initializing the module. The PCTs can be invoked on demand by requesting the key pair generation service. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 128 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 11 Life-Cycle Assurance ### 11.1 Installation, Initialization, and Startup Procedures No installation, initialization, or startup steps are required as the module is pre-built into the images that the vendor provides. ### 11.2 Administrator Guidance To verify that the module is prebuilt into a Chainguard image, the Crypto Officer must review the image specification (e.g. Chainguard Console SBOM tab, SPDX image attestation, apk installed package database, syft output, AWS Inspector) to ensure it contai ns the package 'openssl -fips-provider3.6.0' version '3.6.0 - r4'. The Crypto Officer must verify the name and version of the module. This is done by retrieving the parameters OSSL_PROV_PARAM_NAME and OSSL_PROV_PARAM_BUILDINFO from the module. Since there can be several providers for OpenSSL, and since only the 'fips' pro vider is the module, the Crypto Officer must ensure that the 'fips' provider of OpenSSL is queried when retrieving these parameters and when requesting any other service. OSSL_PROV_PARAM_NAME must have the value: 'Chainguard FIPS Provider for OpenSSL'. OSSL_PROV_PARAM_BUILDINFO must have the value: '3.6.0 - r4' The Approved and non-Approved modes of operation are specified in section 2.4. The administrative functions are specified in the Approved Services table. All the logical interfaces are specified in section 3.1. The requirements and restrictions that shall be considered when operating the module in approved mode are specified in section 2.7 and section 6. ### 11.3 Non-Administrator Guidance There is no non-administrator guidance. ### 11.4 End of Life As the module does not persistently store SSPs, secure sanitization of the module consists of unloading the module. This will zeroize all SSPs in volatile memory. Then, if desired, the package can be uninstalled from the system. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 129 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## 12 Mitigation of Other Attacks ### 12.1 Attack List Certain cryptographic subroutines and algorithms are vulnerable to timing analysis. The module mitigates this vulnerability by using constant-time implementations. This includes, but is not limited to: - Big number operations: computing GCDs, modular inversion, multiplication, division, and modular exponentiation (using Montgomery multiplication). - Elliptic curve point arithmetic: addition and multiplication (using the Montgomery ladder). - Vector-based AES implementations. ### 12.2 Mitigation Effectiveness RSA, ECDSA, ECDH, and DH employ blinding techniques to further impede timing and power analysis. © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 130 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## Appendix A. Glossary and Abbreviations AES AES-NI Advanced Encryption Standard Advanced Encryption Standard New Instructions API Application Programming Interface CAST Cryptographic Algorithm Self-Test CAVP Cryptographic Algorithm Validation Program CBC Cipher Block Chaining CCM Counter with Cipher Block Chaining-Message Authentication Code CFB Cipher Feedback CKG Cryptographic Key Generation CMAC Cipher-based Message Authentication Code CMVP Cryptographic Module Validation Program CPACF CP Assist for Cryptographic Functions CSP Critical Security Parameter CTR Counter CTS Ciphertext Stealing DH Diffie-Hellman DRBG Deterministic Random Bit Generator ECB Electronic Code Book ECC Elliptic Curve Cryptography ECDH Elliptic Curve Diffie-Hellman ECDSA Elliptic Curve Digital Signature Algorithm EVP Envelope FFC Finite Field Cryptography FIPS Federal Information Processing Standards GCM Galois Counter Mode GMAC Galois Counter Mode Message Authentication Code HKDF HMAC-based Key Derivation Function HMAC Keyed-Hash Message Authentication Code IKE Internet Key Exchange © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 131 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | KAS | Key Agreement Scheme | |--------|-----------------------------------------------------------| | KAT | Known Answer Test | | KBKDF | Key-based Key Derivation Function | | KMAC | KECCAK Message Authentication Code | | KW | Key Wrap | | KWP | Key Wrap with Padding | | MAC | Message Authentication Code | | NIST | National Institute of Science and Technology | | OAEP | Optimal Asymmetric Encryption Padding | | OFB | Output Feedback | | PAA | Processor Algorithm Acceleration | | PCT | Pair-wise Consistency Test | | PBKDF2 | Password-based Key Derivation Function v2 | | PKCS | Public-Key Cryptography Standards | | PSS | Probabilistic Signature Scheme | | RSADP | RSA Decryption Primitive | | RSAEP | RSA Encryption Primitive | | RSA | Rivest, Shamir, Addleman | | SHA | Secure Hash Algorithm | | SSC | Shared Secret Computation | | SSH | Secure Shell | | SSP | Sensitive Security Parameter | | TLS | Transport Layer Security | | XOF | Extendable Output Function | | XTS | XEX-based Tweaked-codebook mode with cipher text Stealing | This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 132 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy ## Appendix B. References ANS X9.42-2001 ANS X9.63-2001 FIPS 140-3 FIPS 140-3 IG [09-022025] Public Key Cryptography for the Financial Services Industry: Agreement of Symmetric Keys Using Discrete Logarithm Cryptography 2001 [https://webstore.ansi.org/standards/ascx9/ansix9422001](https://webstore.ansi.org/standards/ascx9/ansix9422001) Public Key Cryptography for the Financial Services Industry, Key Agreement and Key Transport Using Elliptic Curve Cryptography 2001 [https://webstore.ansi.org/standards/ascx9/ansix9632001](https://webstore.ansi.org/standards/ascx9/ansix9632001) FIPS PUB 140-3 - Security Requirements For Cryptographic Modules March 2019 [https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-3.pdf](https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-3.pdf) Implementation Guidance for FIPS PUB 140-3 and the Cryptographic Module Validation Program FIPS 180-4 [https://csrc.nist.gov/Projects/cryptographic-module-validation-program/fips-140-3-igannouncements](https://csrc.nist.gov/Projects/cryptographic-module-validation-program/fips-140-3-ig-announcements) Secure Hash Standard (SHS) FIPS 186-5 March 2012 [https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.180-4.pdf](https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.180-4.pdf) Digital Signature Standard (DSS) FIPS 197 February 2023 [https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.186-5.pdf](https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.186-5.pdf) Advanced Encryption Standard FIPS 198-1 November 2001 [https://csrc.nist.gov/publications/fips/fips197/fips-197.pdf](https://csrc.nist.gov/publications/fips/fips197/fips-197.pdf) The Keyed Hash Message Authentication Code (HMAC) FIPS 202 July 2008 [https://csrc.nist.gov/publications/fips/fips198-1/FIPS-198-1_final.pdf](https://csrc.nist.gov/publications/fips/fips198-1/FIPS-198-1_final.pdf) SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions PKCS#1 August 2015 [https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf](https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf) Public Key Cryptography Standards (PKCS) #1: RSA Cryptography RFC 3526 Specifications Version 2.1 February 2003 [http://www.ietf.org/rfc/rfc3447.txt](http://www.ietf.org/rfc/rfc3447.txt) More Modular Exponential (MODP) Diffie-Hellman groups for Internet Key Exchange (IKE) May 2003 [https://www.ietf.org/rfc/rfc3526.txt](https://www.ietf.org/rfc/rfc3526.txt) © 2026 Chainguard / atsec information security. This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 133 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | RFC 5288 | AES Galois Counter Mode (GCM) Cipher Suites for TLS August 2008 https://www.ietf.org/rfc/rfc5288.txt | |---------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | RFC 7919 | Negotiated Finite Field Diffie-Hellman Ephemeral Parameters for Transport Layer Security (TLS) August 2016 https://www.ietf.org/rfc/rfc7919.txt | | RFC 8446 | The Transport Layer Security (TLS) Protocol Version 1.3 August 2018 https://www.ietf.org/rfc/rfc8446.txt | | SP 800-38A | Recommendation for Block Cipher Modes of Operation Methods and Techniques December 2001 https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38a-add.pdf | | SP 800-38A Addendum | Recommendation for Block Cipher Modes of Operation: Three Variants of Ciphertext Stealing for CBC Mode October 2010 https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38a-add.pdf | | SP 800-38B | Recommendation for Block Cipher Modes of Operation: The CMAC Mode for Authentication May 2005 https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-38B.pdf | | SP 800-38C | Recommendation for Block Cipher Modes of Operation: the CCM Mode for Authentication and Confidentiality May 2004 https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38c.pdf | | SP 800-38D | Recommendation for Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC November 2007 https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38d.pdf | | SP 800-38E | Recommendation for Block Cipher Modes of Operation: The XTS AES Mode for Confidentiality on Storage Devices https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38e.pdf | | SP 800-38F | Recommendation for Block Cipher Modes of Operation: Methods for Key Wrapping December 2012 https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-38F.pdf | | SP 800-52r2 | Guidelines for the Selection, Configuration, and Use of Transport Layer Security (TLS) Implementations August 2019 https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-52r2.pdf | This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 134 of 135 Chainguard FIPS Provider for OpenSSL FIPS 140-3 Non-Proprietary Security Policy | SP 800-56Ar3 | Recommendation for Pair-Wise Key Establishment Schemes Using Discrete Logarithm Cryptography April 2018 https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-56Ar3.pdf | |----------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | SP 800-56Cr1 | Recommendation for Key-Derivation Methods in Key-Establishment Schemes August 2020 https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-56Cr1.pdf | | SP 800-56Cr2 | Recommendation for Key-Derivation Methods in Key-Establishment Schemes August 2020 https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-56Cr2.pdf | | SP 800-90Ar1 | Recommendation for Random Number Generation Using Deterministic Random Bit Generators June 2015 https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-90Ar1.pdf | | SP 800-90B | Recommendation for the Entropy Sources Used for Random Bit Generation January 2018 https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-90B.pdf | | SP 800-108r1 | NIST Special Publication 800-108 - Recommendation for Key Derivation Using Pseudorandom Functions August 2022 https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-108r1.pdf | | SP 800-132 | Recommendation for Password-Based Key Derivation - Part 1: Storage Applications December 2010 https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-132.pdf | | SP 800-133r2 | Recommendation for Cryptographic Key Generation June 2020 https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-133r2.pdf | | SP 800-135r1 | Recommendation for Existing Application-Specific Key Derivation Functions December 2011 https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-135r1.pdf | | SP 800-140Br1 | CMVP Security Policy Requirements November 2023 https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-140Br1.pdf | This document can be reproduced and distributed only whole and intact, including this copyright notice. Page 135 of 135