##### Certification Report ## EUCC-3087-2026-0009 for ### Security IC Platform Multi-assurance PPConfigurations, Version 1.0 issued by ### Eurosmart AISBL | Administration ID: BSI-CC-PP-0125-2026 BSI - Bundesamt für Sicherheit in der Informationstechnik, Postfach 20 03 63, D-53133 Bonn Phone +49 (0)228 99 9582-0, Fax +49 (0)228 9582-5477, Infoline +49 (0)228 99 9582-11 Certification Report V1.0 EUCC-PP-414_V1.0 EUCC-3087-2026-0009 Certification Report #### Contents | A. | Certification.....................................................................................................................4 | |------------------|---------------------------------------------------------------------------------------------------------------------------------------| | 1. | Preliminary Remarks....................................................................................................4 | | 2. | Specifications of the Certification Procedure...............................................................4 | | 3. | Mutual Recognition......................................................................................................5 | | 4. | Performance of Evaluation and Certification................................................................6 | | 5. | Validity of the Certification Result.................................................................................6 | | 6. | Publication...................................................................................................................7 | | B. Certification | Results........................................................................................................8 | | 1. | Protection Profile Overview..........................................................................................9 | | 2. | Security Functional Requirements...............................................................................9 | | 3. | Assurance Requirements...........................................................................................10 | | 4. | Results of the PP Configuration evaluation................................................................10 | | 5. | Obligations and notes for the usage..........................................................................10 | | 6. | Identification of the PP-Configuration........................................................................10 | | 7. | PP-Configurations Document.....................................................................................11 | | 8. | Definitions..................................................................................................................11 | | 9. | Bibliography...............................................................................................................12 | | C. | Annexes........................................................................................................................14 | 3 / 14 Certification Report EUCC-3087-2026-0009 ## A. Certification ### 1. Preliminary Remarks The Implementing Regulation (EU) 2024/482 of the European Parliament and of the Council of 31 January 2024 [IR] establishes a Union-wide cybersecurity certification scheme for ICT products and Protection Profiles for conformity assessments using the requirements of Common Criteria. By implementing the Cybersecurity Act [CSA], certification activities at assurance level 'high' and in duly justified cases at assurance level 'substantial' are reserved to the National Cybersecurity Certification Agency of a Member State. In accordance to BSIG Act [BSIG], the Federal Office for Information Security (BSI) issues certificates for information technology products as well as for Protection Profiles (PP). A PP defines an implementation-independent set of IT security requirements for a category of products which are intended to meet common consumer needs for IT security. A PP claimed by a user, consumer or stakeholder for IT gives them the possibility to express their IT security needs without referring to a specific product. Product certifications can be based on Protection Profiles. For products which have been certified based on a Protection Profile an individual certificate will be issued but the results from a PP certification can be re-used for the Security Target evaluation within a product evaluation when conformance to the PP has been claimed. Certification of the Protection Profile is carried out on the instigation of the BSI or a sponsor. A part of the procedure is the technical examination (evaluation) of the product according to the security criteria referenced in the above mentioned Implementing Regulation (EU) 2024/482 as well as relevant application notes and interpretations published by the certification body of the BSI. Evaluation facilities notified by the German National Cybersecurity Certification Authority carry out the evaluation. This Certification Report is the result of the certification activities carried out by the certification body of the BSI in conclusion of the technical evaluation. This report contains among others the certificate (summarised assessment) and the detailed Certification Results. The certification is not an endorsement of the Protection Profile by the Federal Office for Information Security or any other organisation that recognises or gives effect to this certificate, and no warranty of the Protection Profile by the Federal Office for Information Security or any other organisation that recognises or gives effect to this certificate, is either expressed or implied. ### 2. Specifications of the Certification Procedure The certification body carries out its activities according to the criteria laid down in the following: - Implementing Regulation (EU) 2024/482 of the European Parliament and of the Council of 31 January 2024 laying down rules for the application of Regulation (EU) 2019/881 of the European Parliament and of the Council as regards the adoption of the European Common Criteria-based cybersecurity certification scheme (EUCC) [IR] 4 / 14 EUCC-3087-2026-0009 Certification Report - EUCC state-of-the-art documents of relevance to the TOE [SotA] - Act on the Federal Office for Information Security [BSIG] - BSI Certification and Approval Ordinance [ZertV] - BMI Regulations on Ex-parte Costs [GebV] - Special decrees issued by the Bundesministerium des Innern (Federal Ministry of the Interior and Community) - ISO/IEC 15408 as published on the day of issuance of this certificate and as mirrored by the Common Criteria for IT Security Evaluation [CC] - ISO/IEC 18045 as published on the day of issuance of this certificate and as mirrored by the Common Methodology for IT Security Evaluation [CEM] - DIN EN ISO/IEC 17065 standard - EUCC programme: Scheme documentation describing the certification process (EUCC) [EUCC] - BSI certification: Application Notes and Interpretation of the Scheme (AIS) [AIS] ### 3. Mutual Recognition #### 3.1. EU Cybersecurity Certification Scheme on Common Criteria (EUCC) Certificates issued under EUCC are recognised according to Implementing Regulation (EU) 2024/482 [IR]. Details of EUCC can be found at [https://certification.enisa.europa.eu/certification-library/eucc-certification-scheme_en.](https://certification.enisa.europa.eu/certification-library/eucc-certification-scheme_en) #### 3.2. International Recognition of CC - Certificates (CCRA) In order to avoid multiple certification of the same Protection Profile in different countries a mutual recognition of IT security certificates - as far as such certificates are based on CC - under certain conditions was agreed. Therefore, the results of this evaluation and certification procedure can be re-used by the product certificate issuing scheme in the evaluation of a Security Target within a subsequent product evaluation and certification procedure. The international Common Criteria Recognition Arrangement (CCRA) became effective in September 2014 in its current version. It defines the recognition of certificates for ITproducts based on collaborative Protection Profiles (cPP) (exact use), CC certificates based on assurance components up to and including EAL 2 or the assurance family Flaw Remediation (ALC_FLR) and CC certificates for Protection Profiles and for collaborative Protection Profiles (cPP). The Common Criteria Recognition Arrangement logo printed on the certificate indicates that this certification is recognised under the terms of this agreement by the related bodies of the signatory nations. A disclaimer beneath the logo indicates the specific scope of recognition. Details on recognition, the signatory nations and the agreement itself can be found at https://www.commoncriteriaportal.org. 5 / 14 Certification Report EUCC-3087-2026-0009 ### 4. Performance of Evaluation and Certification - The Protection Profile Security IC Platform Multi-assurance PP-Configurations, Version 1.0 has been certified under the EUCC scheme in accordance to the provisions of the Implementing Regulation (EU) 2024/482. - The evaluation of the Protection Profile Security IC Platform Multi-assurance PPConfigurations, Version 1.0 was conducted by SGS. The evaluation was completed on 30 July 2026. SGS is a notified evaluation facility (ITSEF). - The Evaluation Technical Report [ETR] was provided by the ITSEF according to the Common Criteria [CC], the Methodology [CEM], and the requirements of the Scheme [IR]. - CC Version and Release: see [CC] and [CEM] - Claimed Assurance level according to the CSA [CSA]: high - For this certification procedure the sponsor and applicant is: Eurosmart AISBL. - The PP was developed by: Infineon Technologies AG, NXP Semiconductors, STMicroelectronics and Thales. - The certification body monitors each individual evaluation to ensure a uniform application and interpretation of the criteria as well as uniform ratings. - The certification activities are concluded with the comparability check and the production of this Certification Report. This work was completed by the certification body of the BSI. ### 5. Validity of the Certification Result This Certification Report applies only to the version of the PP as identified in this document. In case of changes to the certified version of the Protection Profile, the validity can be extended to new versions and releases, provided the sponsor applies for assurance continuity (i.e. re-certification or maintenance) of the modified Protection Profile, in accordance with the procedural requirements, and the evaluation does not reveal any security deficiencies. For the meaning of the CC concepts and terms please refer to CC [CC] Part 1 through 5. The validity of this certificate ends as outlined on the certificate. The applicant and the sponsor of this certificate are recommended to review the technical content of the Protection Profile certified according to the evolvement of the technology and of the intended operational environment of the type of product concerned as well as according to the evolvement of the evaluation criteria. Such review should result in an update and a recertification of the Protection Profile accordingly. Typically, technical standards are reviewed on a five years basis. The limitation of validity of this PP certificate does not necessarily impact the validity period of a product certificate referring to this Protection Profile, but the certification body issuing a product certificate based on this Protection Profile should take it into its consideration on validity. 6 / 14 EUCC-3087-2026-0009 Certification Report ### 6. Publication The PP Security IC Platform Multi-assurance PP-Configurations, Version 1.0 has been notified to ENISA for publication on the website on European cybersecurity certification schemes https://certification.enisa.europa.eu/. Further information can be obtained from BSI-Infoline +49 228 9582-111. This holder of the certificate 1 has to publish on its website this Certification Report and supplementary information. The Certification Report may also be obtained in electronic form at the internet address stated above. 1 Eurosmart AISBL Square de Meeûs 35 1000 Bruxelles Belgium 7 / 14 Certification Report EUCC-3087-2026-0009 ## B. Certification Results The following chapters summarise the assessment results of the - the certified Protection Profile, - the relevant evaluation results from the evaluation facility, and - complementary notes, statements and indications from the certification body. 8 / 14 EUCC-3087-2026-0009 Certification Report ### 1. Protection Profile Overview The Common Criteria Protection Profile Configuration Security IC Platform Multiassurance PP-Configurations, Version 1.0 [PPC] is established by Eurosmart AISBL as a basis for the development of Security Targets in order to perform a certification of an ITproduct, the Target of Evaluation (TOE). The PP-Configurations defined in [PPC] are composed of the base PP-0084-V2 [bPP] and a subset of functional packages and PP-Modules. All the PP-Modules have the PP-0084V2 as base PP. The PP-Modules address functionality that is already in the scope of the base PP, but at a strictly higher assurance level including ADV_SPM.1. The TOE type is the same as in the base PP, a Security IC platform comprising hardware and IC Dedicated Software. The selectable PP-Modules are defined in chapters 3.1 to 3.5 of the PP-Configurations [PPC]: - PP-Module 'Authentication of the Security IC' - PP-Module 'Loader 1' (for usage in secured environment only) - PP-Module 'Loader 2' (for usage by authorised users only) - PP-Module 'Address-based Access Control' - PP-Module 'Limited Test Features', does not claim any functional package conformance Each PP-Module claims conformance to the assurance package EAL4 augmented with ADV_SPM.1, ALC_DVS.2, ALC_FLR.2 and AVA_VAN.5, including the refinements defined in the base PP [bPP]. The TOE implements physical protection of its assets and the assets of the Embedded Software against probing, forced and inherent information leakage, manipulation, and malfunctions induced by environmental stress as defined in the base PP [bPP]. Based on these assets the security problem definition is defined in terms of assumptions, threats and organisational security policies. This is outlined in the base PP [bPP], chapter 3. The PPModules do not add assets, OSPs nor assumptions. The PP-Configurations require strict conformance of a Security Target claiming conformance to it. ### 2. Security Functional Requirements Based on the security objectives to be fulfilled by a TOE claiming conformance to this PPConfiguration the security policy is expressed by the set of security functional requirements (SFR) to be implemented by a TOE. Specific details concerning these security policies can be found in the base PP [bPP] chapter 6 and in chapters 3.x.5.1 of the PP-Configurations document [PPC] for each PPModule. The SFRs are selected from Common Criteria Part 2 and some of them are newly defined. Thus the SFR claim is called: Common Criteria Part 2 extended 9 / 14 Certification Report EUCC-3087-2026-0009 ### 3. Assurance Requirements The TOE security assurance package claimed in the PP-Configurations is based entirely on the assurance components defined in part 3 of the Common Criteria. Thus, this assurance package is called: - Assurance Common Criteria Part 3 conformant Multi-Assurance ● Global Assurance EAL 4 augmented by ALC_DVS.2, ALC_FLR.2 and AVA_VAN.5 - Assurance of the PP-Module-based sub-TSFs EAL 4 augmented by ADV_SPM.1, ALC_DVS.2, ALC_FLR.2 and AVA_VAN.5 (for the definition and scope of assurance packages according to CC see [CC], part 3 for details). ### 4. Results of the PP Configuration evaluation As a result of the evaluation the verdict PASS is confirmed for the assurance components of the class ACE (PP-Configuration evaluation). The following assurance components were used: ACE_INT.1 PP-Module introduction ACE_CCL.1 PP-Module conformance claims ACE_SPD.1 PP-Module security problem definition ACE_OBJ.2 PP-Module security objectives ACE_ECD.1 PP-Module extended components definition ACE_REQ.2 PP-Module derived security requirements ACE_MCO.1 PP-Module consistency ACE_CCO.1 PP-Configuration consistency The results of the evaluation are only applicable to the Protection Profile as defined in chapter 1. ### 5. Obligations and notes for the usage The following aspects need to be fulfilled when using the PP-Configurations: none The certification results apply only to the version of the PP indicated in the certificate and on the condition that all the statements and indications are kept as detailed in this Certification Report. Neither the BSI nor any other organisation that recognises or gives effect to this certificate implicitly or explicitly guarantee or endorse the certified ICT product. ### 6. Identification of the PP-Configuration The Target of Evaluation (TOE) is identified as follows: Security IC Platform Multi-assurance PP-Configurations, Version 1.0 SHA256: 6973adfb8dc9d9d4aff7796e2baf001ec3a12c506cb453482b22b3d7e6082607 10 / 14 EUCC-3087-2026-0009 Certification Report Holder of the certificate: Eurosmart AISBL Square de Meeûs 35 1000 Bruxelles Belgium www.eurosmart.com ### 7. PP-Configurations Document The Security IC Platform Multi-assurance PP-Configurations, Version 1.0 [PPC] is being provided within a separate document as Annex A of this report. ### 8. Definitions #### 8.1. Acronyms | bPP | base Protection Profile | |-------|--------------------------------------------------------------------------------------------------------------| | BSI | Bundesamt für Sicherheit in der Informationstechnik / Federal Office for Information Security, Bonn, Germany | | CCRA | Common Criteria Recognition Arrangement | | EAL | Evaluation Assurance Level | | ETR | Evaluation Technical Report | | IT | Information Technology | | ITSEF | Information Technology Security Evaluation Facility | | PP | Protection Profile | | PPC | Protection Profile Configuration | | SAR | Security Assurance Requirement | | SFP | Security Function Policy | | SFR | Security Functional Requirement | | ST | Security Target | | TOE | Target of Evaluation | | TSF | TOE Security Functionality | #### 8.2. Glossary Augmentation - The addition of one or more requirement(s) to a package. Extension - The addition to an ST or PP of functional requirements not contained in CC part 2 and/or assurance requirements not contained in CC part 3. Formal - Expressed in a restricted syntax language with defined semantics based on wellestablished mathematical concepts. Object - A passive entity in the TOE, that contains or receives information, and upon which subjects perform operations. Package - named set of either security functional or security assurance requirements Protection Profile - A formal document defined in CC, expressing an implementation independent set of security requirements for a category of IT Products that meet specific consumer needs. 11 / 14 Certification Report EUCC-3087-2026-0009 Security Target - An implementation-dependent statement of security needs for a specific identified TOE. Subject - An active entity in the TOE that performs operations on objects. Target of Evaluation - An IT Product and its associated administrator and user guidance documentation that is the subject of an Evaluation. TOE Security Functionality - Combined functionality of all hardware, software, and firmware of a TOE that must be relied upon for the correct enforcement of the SFRs. ### 9. Bibliography - [CSA] Regulation (EU) 2019/881 of the European Parliament and of the Council of 17 April 2019 on ENISA (the European Union Agency for Cybersecurity) and on information and communications technology cybersecurity certification and repealing Regulation (EU) No 526/2013 (Cybersecurity Act) - [IR] Implementing Regulation (EU) 2024/482 of the European Parliament and of the Council of 31 January 2024 laying down rules for the application of Regulation (EU) 2019/881 of the European Parliament and of the Council as regards the adoption of the European Common Criteria-based cybersecurity certification scheme and related amendments (EUCC) - [BSIG] Act on the Federal Office for Information Security (BSI-Gesetz - BSIG) of 02 December 2025, Bundesgesetzblatt 2025 I Nr. 301, S. 2 - [ZertV] Ordinance on the Procedure for Issuance of Security Certificates and approval by the Federal Office for Information Security (BSI-Zertifizierungs- und Anerkennungsverordnung - BSIZertV) of 17 December 2014, Bundesgesetzblatt 2014, part I, no. 61, p. 2231 - [GebV] BMI Regulations on Ex-parte Costs - Besondere Gebührenverordnung des BMI für individuell zurechenbare öffentliche Leistungen in dessen Zuständigkeitsbereich (BMIBGebV), Abschnitt 7 (BSI-Gesetz) - dated 2 September 2019, Bundesgesetzblatt I p. 1365 - [CC] ISO 15408:2022, Common Criteria for Information Technology Security Evaluation - Part 1: Introduction and general model - Part 2: Security functional components - Part 3: Security assurance components - Part 4: Framework for the specification of evaluation methods and activities - Part 5: Pre-defined packages of security requirements [https://www.iso.org/standard/72891.html](https://www.iso.org/standard/72891.html) [https://www.iso.org/standard/72892.html](https://www.iso.org/standard/72892.html) [https://www.iso.org/standard/72906.html](https://www.iso.org/standard/72906.html) [https://www.iso.org/standard/72913.html](https://www.iso.org/standard/72913.html) [https://www.iso.org/standard/72917.html](https://www.iso.org/standard/72917.html) as mirrored by CCRA's edition: CC:2022 R1, Common Criteria for Information Technology Security Evaluation 12 / 14 EUCC-3087-2026-0009 Certification Report - Part 1: Introduction and general model - Part 2: Security functional components - Part 3: Security assurance components - Part 4: Framework for the specification of evaluation methods and activities - Part 5: Pre-defined packages of security requirements [https://www.commoncriteriaportal.org](https://www.commoncriteriaportal.org/) - [CEM] ISO 18045:2022: Information technology Security techniques Methodology for IT security evaluation https://www.iso.org/standard/72889.html as mirrored by CCRA's edition: CEM:2022 R1, Common Methodology for Information Technology Security [Evaluation https://www.commoncriteriaportal.org](https://www.commoncriteriaportal.org/) - [EUCC] EUCC program of the BSI: Scheme documentation describing the certification process (EUCC), https://www.bsi.bund.de/zertifizierung - [SotA] EUCC state-of-the-art documents, https://certification.enisa.europa.eu/ - [PUB] EUCC Certificates, periodically updated list published on ENISA's website on European cybersecurity certification schemes, https://certification.enisa.europa.eu/ - [AIS] Application Notes and Interpretations of the Scheme (AIS) as relevant for the TOE, https://www.bsi.bund.de/AIS - [bPP] Base PP: Security IC Platform Protection Profile including optional Functional Packages, BSI-CC-PP-0084-V2, Version 2.0, 16 December 2025, Eurosmart AISBL - [PPC] PP-Configuration: Security IC Platform Multi-assurance PP-Configurations, Version 1.0, 16 December 2025, Eurosmart AISBL, SHA256: 6973adfb8dc9d9d4aff7796e2baf001ec3a12c506cb453482b22b3d7e6082607 - [ETR] Evaluation Technical Report for BSI-CC-PP-0125 - Security IC Platform Multiassurance PP-Configurations, Version 4.0, 30 July 2026, SGS Digital Trust Services GmbH (confidential document) 13 / 14 Certification Report EUCC-3087-2026-0009 ## C. Annexes ####### List of annexes of this certification report Annex A: PP-Configuration Security IC Platform Multi-assurance PP-Configurations, Version 1.0 [PPC] is provided within a separate document. 14 / 14