Page 1 of 86 RICOH IM 2500/3000/3500/4000/5000/6000 version JE-1.00-H Security Target Version 1.4 October 2021 Document prepared by www.lightshipsec.com RICOH Security Target Page 2 of 86 Document History Version Date Description 0.1 5 Jan 2021 Initial draft 0.2 12 Jan 2021 Incorporate Ricoh input 0.3 3 Feb 2021 Address lab observations 0.4 17 Feb 2021 Correct FAU_GEN events and update TDs. 0.5 9 Mar 2021 Update user guidance and CAVP references. 0.6 12 April 2021 Addressed CB ORs Updated RSA signature verification references in Table 5 Added audit storage clarification. 1.0 12 May 2021 Addressed CB ORs 1.1 19 May 2021 Addressed CB ORs 1.2 20 August 2021 Developer comments and updates after witness testing 1.3 31 August 2021 Addressed CB ORs. 1.4 14 Oct 2021 Addressed NIAP comments. RICOH Security Target Page 3 of 86 Table of Contents 1 Introduction ........................................................................................................................... 5 1.1 Overview ........................................................................................................................ 5 1.2 Identification ................................................................................................................... 5 1.3 Conformance Claims...................................................................................................... 5 1.4 Terminology.................................................................................................................... 6 2 TOE Description.................................................................................................................... 7 2.1 Type ............................................................................................................................... 7 2.2 Usage ............................................................................................................................. 7 2.3 Physical Scope............................................................................................................... 9 2.4 Logical Scope............................................................................................................... 10 3 Security Problem Definition............................................................................................... 14 3.1 Users ............................................................................................................................ 14 3.2 Assets........................................................................................................................... 14 3.3 Threats ......................................................................................................................... 16 3.4 Assumptions................................................................................................................. 16 3.5 Organizational Security Policies................................................................................... 17 4 Security Objectives............................................................................................................. 18 5 Security Requirements....................................................................................................... 20 5.1 Conventions ................................................................................................................. 20 5.2 Extended Components Definition................................................................................. 20 5.3 Functional Requirements ............................................................................................. 20 5.4 Assurance Requirements............................................................................................. 41 6 TOE Summary Specification.............................................................................................. 42 6.1 Security Audit ............................................................................................................... 42 6.2 Identification and Authentication .................................................................................. 43 6.3 Access Control ............................................................................................................. 44 6.4 Cryptographic Operations ............................................................................................ 46 6.5 Stored Data Encryption ................................................................................................ 47 6.6 Protection of the TSF ................................................................................................... 48 6.7 Trusted Communications ............................................................................................. 48 6.8 Administrative Roles .................................................................................................... 50 6.9 Trusted Operation ........................................................................................................ 51 6.10 PSTN Fax-Network Separation.................................................................................... 53 6.11 Image Overwrite........................................................................................................... 54 7 Rationale.............................................................................................................................. 55 7.1 Conformance Claim Rationale ..................................................................................... 55 7.2 Security Objectives Rationale ...................................................................................... 55 7.3 Security Assurance Requirements rationale................................................................ 57 Annex A: Extended Components Definition............................................................................. 58 Security Audit (FAU).................................................................................................................. 58 Cryptographic Support (FCS).................................................................................................... 59 User Data Protection (FDP) ...................................................................................................... 71 Identification and Authentication (FIA) ...................................................................................... 72 Protection of the TSF (FPT) ...................................................................................................... 75 Annex B: Security Assurance Requirements ........................................................................... 79 RICOH Security Target Page 4 of 86 Class ASE: Security Target evaluation ..................................................................................... 79 Class ADV: Development.......................................................................................................... 79 Class AGD: Guidance Documents............................................................................................ 81 Class ALC: Life-cycle Support .................................................................................................. 83 Class ATE: Tests....................................................................................................................... 84 Class AVA: Vulnerability Assessment....................................................................................... 85 List of Tables Table 1: Evaluation identifiers ......................................................................................................... 5 Table 2: NIAP Technical Decisions ................................................................................................. 5 Table 3: Terminology....................................................................................................................... 6 Table 4: TOE Models....................................................................................................................... 9 Table 5: CAVP Certificates............................................................................................................ 11 Table 6: User Categories............................................................................................................... 14 Table 7: Asset Categories ............................................................................................................. 14 Table 8: User Data Types.............................................................................................................. 14 Table 9: Document and Job Attributes .......................................................................................... 15 Table 10: TSF Data Types ............................................................................................................ 15 Table 11: Threats........................................................................................................................... 16 Table 12: Assumptions .................................................................................................................. 17 Table 13: Organizational Security Policies.................................................................................... 17 Table 14: Security Objectives for the TOE .................................................................................... 18 Table 15: Security Objectives for the Operational Environment ................................................... 19 Table 16: Summary of SFRs ......................................................................................................... 20 Table 17: Audit Events .................................................................................................................. 23 Table 18: D.USER.DOC Access Control SFP............................................................................... 28 Table 19: D.USER.JOB Access Control SFP................................................................................ 31 Table 20: Management of TSF Data ............................................................................................. 35 Table 21: Management Functions ................................................................................................. 37 Table 22: TOE Security Assurance Requirements....................................................................... 41 Table 23: List of Audit Events........................................................................................................ 42 Table 24: Stored Documents Access Control Rules for Normal Users......................................... 45 Table 25: Random Number Sources............................................................................................. 46 Table 26: Keychain encryption ...................................................................................................... 47 Table 27: TLS/HTTPS Cryptographic Functions ........................................................................... 49 Table 28: IPsec Cryptographic Functions ..................................................................................... 50 Table 29: Start-up Integrity Tests .................................................................................................. 52 Table 30: Signature Verification .................................................................................................... 53 Table 31: Security Objectives Rationale ....................................................................................... 55 Table 32: Security Objectives Rationale ....................................................................................... 57 RICOH Security Target Page 5 of 86 1 Introduction 1.1 Overview 1 This Security Target (ST) defines the RICOH IM 2500/3000/3500/4000/5000/6000, version JE-1.00-H Target of Evaluation (TOE) for the purposes of Common Criteria (CC) evaluation. 1.2 Identification Table 1: Evaluation identifiers Target of Evaluation RICOH IM 2500/3000/3500/4000/5000/6000, version JE-1.00-H Security Target RICOH IM 2500/3000/3500/4000/5000/6000 Security Target, v1.4 1.3 Conformance Claims 2 This ST supports the following conformance claims: a) CC version 3.1 revision 4 b) CC Part 2 extended c) CC Part 3 conformant d) Protection Profile for Hardcopy Devices, v1.0 e) Protection Profile for Hardcopy Devices, v1.0, Errata #1, June 2017 f) NIAP Technical Decisions per Table 2 Table 2: NIAP Technical Decisions TD # Name Rationale if n/a TD0074 FCS_CKM.1(a) Requirement in HCD PP v1.0 TD0157 FCS_IPSEC_EXT.1.1 - Testing SPDs TD0176 FDP_DSK_EXT.1.2 - SED Testing TD0219 NIAP Endorsement of Errata for HCD PP v1.0 TD0253 Assurance Activities for Key Transport TD0261 Destruction of CSPs in flash TD0299 Update to FCS_CKM.4 Assurance Activities TD0393 Require FTP_TRP.1(b) only for printing TD0474 Removal of Mandatory Cipher Suite in FCS_TLS_EXT.1 TD0494 Removal of Mandatory SSH Ciphersuite for HCD SSH is not claimed. RICOH Security Target Page 6 of 86 TD # Name Rationale if n/a TD0562 Test activity for Public Key Algorithms SSH is not claimed. 1.4 Terminology Table 3: Terminology Term Definition BEV Border Encryption Value Firewall A device to protect the LAN from internet threats. FTP Server An external IT entity used by the TOE to receive and store user documents HDD A field-replaceable non-volatile memory storage device, that the TOE uses to store documents, and user accounts information. LAN Local Area Network — Network used in the TOE environment lc key A hardware secure module which provides true random number generation and protected storage for the TOE. LDAP Server An external IT entity used by the TOE for network authentication of users. MFP Multifunction Printer NVRAM The NVRAM is a field-replaceable non-volatile storage device where TOE configuration data is stored. PSTN Public Switched Telephone Network PSTN Line A connection to a public switched telephone network for the TOE to communicate with external fax machines SMTP Server An external IT entity used by the TOE for e-mail transmission Syslog Server An external IT entity used by the TOE for audit log storage RICOH Security Target Page 7 of 86 2 TOE Description 2.1 Type 3 The TOE is a Digital Multi-Function Printer (MFP), which is an IT device that inputs, stores, and outputs electronic and hardcopy documents. 2.2 Usage 4 The expected use cases for the TOE are: a) Scanning. The TOE scans paper documents and then transmits and deletes the scanned images, on command from the Operation Panel. b) Printing. The TOE prints or stores documents received from a printer driver installed on the client computer, and prints or deletes previously stored documents from commands from the Operation Panel or the client computer’s web browser. c) Copying. The TOE scans paper documents to be printed. d) Network Communications. The TOE is connected to its operational environment through a local area network (hereafter "LAN") and the public switched telephone network (PSTN). It sends and receives documents over the LAN and the PSTN. e) Administration. The TOE provides management functions to configure and manage its operation. The management functions are accessible locally from the Operation Panel or remotely through the Web Image Monitor (hereafter “WIM”) accessible using a web browser on a client computer. f) PSTN Faxing. The TOE provides fax transmission and fax reception functions; both exchange documents according to the Group 3 standard over a Public Switch Telephone Network (PSTN). The Fax Transmission Function sends scanned images of paper documents, or images of electronic documents from a client computer, to external fax devices. The Fax Reception Function receives documents from external fax devices, and stores them in the TOE. g) Storage and Retrieval. The TOE provides a Document Server Function which stores documents and allows users to perform operations on persistently stored documents. From the operation panel, users can store, print and delete documents stored by the document server. From a client computer, users can print and delete documents stored by the document server. h) Field-Replaceable Non-volatile Storage. The TOE stores encrypted data both in the HDD and in NVRAM. i) Internal Audit Log Storage. The MFP stores its audit data internally on the local device in addition to providing the capability for storing them externally to a remote syslog server. j) Image Overwrite. The MFP actively overwrites residual image data stored on the HDD after a document processing job has been completed or cancelled. RICOH Security Target Page 8 of 86 2.2.1 Deployment 5 As shown in Figure 1, the TOE is connected to its operational environment through a local area network (hereafter "LAN") and the public switched telephone network (PSTN). Other elements of the TOE’s operational environment are as shown. Figure 1: Example TOE deployment 2.2.2 Interfaces 6 The TOE interfaces include the following: a) Operation Panel of the MFP is an LCD touch screen interface that provides a local user interface where users can perform the following operations: i. Configuration of the MFP ii. Copying, faxing, storage, and network transmission of paper documents iii. Printing, faxing, network transmission, and deletion of the stored documents iv. Receiving fax documents via telephone lines and storing them b) Web Image Monitor (WIM) this is the remote user interface accessible via TLS/HTTPS where users can perform the following operations: i. Limited configuration of the MFP – various settings ii. Operation on stored documents iii. Storage and/or printing of documents iv. Faxing of documents c) Client printer driver or fax driver is a remote user interface where communication is protected using TLS. RICOH Security Target Page 9 of 86 d) IPsec interface is used by the TOE to communicate with LDAP, syslog, NTP, SMTP and FTP servers in the TOE operational environment. e) TLS interface: The TOE can be configured to also use TLS to protect communication with a remote syslog or a remote SMTP server. f) PSTN Fax Line is used to connect to a remote fax machine. 2.3 Physical Scope 7 The physical boundary of the TOE is comprised of the software and hardware of the MFP models identified in Table 4 (which shows the different RICOH Family Group brand names for the TOE) and related guidance documentation. The TOE is delivered by commercial courier and is installed with the assistance of a RICOH customer engineer. 8 The TOE model number is indicative of copy speed (higher numbers have higher copy speeds) and the alphabetic suffix corresponds to regional fonts and printer languages. The differences between models are not security relevant and are limited to print engine components (speed) and branding variations (labels, displays, packaging materials and documentation). Table 4: TOE Models Branding Model RICOH RICOH IM 2500, RICOH IM 2500F RICOH IM 3500, RICOH IM 3500F RICOH IM 4000, RICOH IM 4000F RICOH IM 5000, RICOH IM 5000F RICOH IM 6000, RICOH IM 6000F* IM 2500, IM 2500A, IM 2500G IM 3000, IM 3000A, IM 3000G IM 3500, IM 3500A, IM 3500G IM 4000, IM 4000A, IM 4000G IM 5000, IM 5000A, IM 5000G IM 6000, IM 6000G SAVIN IM 2500, IM 2500A, IM 2500G IM 3000, IM 3000A, IM 3000G IM 3500, IM 3500A, IM 3500G IM 4000, IM 4000G IM 5000, IM 5000G IM 6000, IM 6000G LANIER nashuatec IM 2500, IM 2500A IM 3000, IM 3000A Rex Rotary RICOH Security Target Page 10 of 86 Branding Model Gestetner IM 3500, IM 3500A IM 4000, IM 4000A IM 5000, IM 5000A IM 6000 * Models sold in Japan include RICOH in the model name. 9 The TOE includes the following critical components: a) Main Controller. Provides primary printing, scanning, faxing, and networking functionality. i) CPU. Intel Atom x5-E3930. ii) OS. LPUX6.0 OS (customized NetBSD 6.0.1). b) Operation Unit. Provides front panel interface control and device extensibility capabilities. i) CPU. ARM Cortex-A9 Quad Core. ii) OS. Linux 3.18 (customized). 2.3.1 Guidance Documents 10 The TOE guidance documentation includes the following: a) IM 2500/3000/3500/4000/5000/6000 series User Guide (PDF) b) User Guide Security Reference (HTML) c) RICOH IM 2500/3000/3500/4000/5000/6000 version JE-1.00-H Common Criteria Guide, v1.2 (PDF) 2.4 Logical Scope 11 The logical scope of the TOE comprises the security functions provided by the TOE to include: a) Security Audit. The TOE generates audit records of user and administrator actions. It stores audit records both locally and on a remote syslog server. b) Cryptographic Support. The TOE includes a cryptographic module for the cryptographic operations that it performs. The relevant CAVP certificate numbers are noted in Table 5 below. c) Access Control. The TOE enforces access control policy to restrict access to user data. The TOE ensures that documents, document processing job information, and security-relevant data are accessible only to authenticated users who have the appropriate access permissions. d) Storage Data Encryption. The TOE encrypts data on the HDD and in NVRAM to protect documents and confidential system information if those devices are removed from the TOE. e) Identification and Authentication. Except for a defined minimal set of actions that can be performed by an unauthenticated user, the TOE ensures that all users must be authenticated before accessing its functions and data. Users login to the TOE by entering their credentials on the local operation RICOH Security Target Page 11 of 86 panel, through WIM login, through print or fax drivers, or using network authentication services. f) Administrative Roles. The TOE provides the capability for managing its functions and data. Role-based access controls ensure that the ability to configure the security settings of the TOE is available only to the authorized administrators. Authenticated users can perform copy, printer, scanner, document server and fax operations based on the user role and the assigned permissions. g) Trusted Operations. The TOE performs power-on self-tests to ensure the integrity of the TSF components. It provides a mechanism for performing trusted update that verifies the integrity and authenticity of the upgrade software before applying the updates. It uses an NTP server for accurate time. h) TOE Access. Interactive user sessions at the local and remote user interfaces are automatically terminated by the TOE after a configured period of inactivity. i) Trusted Communications. The TOE protects communications from its remote users using TLS/HTTPS, and communications with the LDAP, FTP, NTP, and SMTP servers using IPsec. The TOE can be configured to use either IPsec or TLS to protect communication with the Syslog and SMTP servers. j) PSTN Fax-Network Separation. The TOE restricts information received from or transmitted to the telephone network to only fax data and fax protocols. It ensures that the fax modem cannot be used to bridge the LAN. k) Image Overwrite. the TOE actively overwrites residual image data stored on the HDD after a document processing job has been completed or cancelled. 2.4.1 CAVP Certificates 12 The TOE includes the cryptographic modules with related CAVP certificates shown Table 5 below. Table 5: CAVP Certificates Cryptographic Module Operating Environment Algorithms CAVP RICOH Cryptographic Module for IPSec, v1.0 Customized NetBSD 6.0.1 on Intel Atom x5-E3930 AES_CBC AES 5315 SHA2-256 SHA2-384 SHA2-512 SHS 4269 HMAC-SHA2_256 HMAC-SHA2-384 HMAC-SHA2-512 HMAC 3515 RICOH Platform Validation Library for JX3 BIOS on Intel Atom x5- E3930 SHA-1 C630 RICOH Security Target Page 12 of 86 RICOH Cryptographic Library 2 (Java), v1.0 Customized Linux 3.18 on ARM Cortex-A9 Quad Core SHA-1 SHA2-256 RSA Signature Verification C582 libgwguard, v0.9.8a Customized NetBSD 6.0.1 on Intel Atom x5-E3930 SHA2-256 SHS 3231 RSA Signature Verification RSA 2002 RICOH Cryptographic Library C, v1.2 Customized Linux 3.18 on ARM Cortex-A9 Quad Core ECDSA signature verification Curve P-256 SHA2-256 C629 LPUX NVRAM Encryption Driver, v1.2 Customized NetBSD 6.0.1 on Intel Atom X5-E3930 AES-CBC Encryption/decryption Key length: 256 AES 4560 Boot SHA-1 Module, v47.04 ST33TPHF2ESPI SHA-1 C715 RICOH Company AES256CBC Implementation MB8AL1062MH-GE1 AES-CBC Encrypt, Decrypt Key Length: 256 AES 3921 wolfCrypt, v4.1.1 NetBSD v6.0.1 on Intel Atom Apollo Lake E3930 (Goldmont) RSA Key Generation RSA Signature Generation (PKCS 1.5) RSA Signature Verification (PKCS 1.5) A1837 ECDHE ECDSA SHA-1, SHA2-256, SHA2-384, SHA2-512 AES-CBC AES-GCM Encryption/decryption Key length 128, 256 HMAC-SHA-1 RICOH Security Target Page 13 of 86 2.4.2 Excluded Features 13 The following features of the MFP are excluded from the evaluated configuration: a) USB Port. The MFP has a USB Port that is used to directly connect a client computer to the MFP for printing. This USB port is disabled during initial installation and configuration of the TOE. b) SD Card Slot. The MFP has two SD Card Slots, one for customer engineers and one for users. The SD Card Slot for customer engineer is used by customer engineers to install components of the MFP; the SD Card Slot for users is used by users to print documents. Both are disabled when the TOE is operational, a cover is placed on the SD Card slot for customer engineer so cards cannot be inserted or removed and the card slot for users is set to disabled during installation. 2.4.3 Required non-TOE Components 14 The following non-TOE components are required in the TOE operational environment: a) Syslog Server. The TOE uses a remote syslog server for long term storage of its audit trail. b) LDAP Server. The TOE uses an LDAP server for user authentication. c) NTP Server. The TOE ensures accurate time by synchronizing with a remote NTP server. d) FTP Server. The TOE stores user documents on a remote FTP server. e) SMTP Server. The TOE uses an SMTP server for email transmission. HMAC-SHA2-256 HMAC-SHA2-384 HMAC-SHA2-512 DRBG RICOH Security Target Page 14 of 86 3 Security Problem Definition 15 The Security Problem Definition is reproduced from section 2 of the HCDPP. 3.1 Users 16 There are two categories of Users defined in this ST, Normal and Admin. Table 6: User Categories Designation Name Definition U.NORMAL Normal User A User who has been identified and authenticated and does not have an administrative role U.ADMIN Administrator A User who has been identified and authenticated and has an administrative role 17 A pseudo-user role, Customer Engineer, can be enabled by an Administrator for use by an authorized service representative. It is normally disabled, as it is in the evaluated configuration. 3.2 Assets 18 Assets are passive entities in the TOE that contain or receive information. In this PP, Assets are Objects (as defined by the CC). There are two categories of Assets defined in this PP: Table 7: Asset Categories Designation Asset category Definition D.USER User Data Data created by and for Users that do not affect the operation of the TSF D.TSF TSF Data Data created by and for the TOE that might affect the operation of the TSF 19 There are no additional Asset categories defined in this ST. 3.2.1 User Data 20 User Data are composed of two types: Table 8: User Data Types Designation User Data type Definition D.USER.DOC User Document Data Information contained in a User’s Document, in electronic or hardcopy form D.USER.JOB User Job Data Information related to a User’s Document or Document Processing Job RICOH Security Target Page 15 of 86 21 There are no additional types of User Data defined in this ST. Attributes associate documents and document processing jobs with the document processing functions of the TOE: Table 9: Document and Job Attributes Document processing function Attribute Printing +PRT Copying +CPY Scanning +SCN Document Storage/Retrieval +DSR Fax (reception) +FAXIN Fax (transmission) +FAXOUT 3.2.2 TSF Data 22 TSF Data are composed of two types: Table 10: TSF Data Types Designation TSF Data type Definition D.TSF.PROT Protected TSF Data TSF Data for which alteration by a User who is neither the data owner nor in an Administrator role might affect the security of the TOE, but for which disclosure is acceptable D.TSF.CONF Confidential TSF Data TSF Data for which either disclosure or alteration by a User who is neither the data owner nor in an Administrator role might affect the security of the TOE 23 There are no additional types of TSF Data defined in this ST. 3.2.2.1 Protected TSF Data 24 D.TSF.PROT is composed of the following data: a) Username b) Number of Attempts before Lockout c) Settings for Lockout Release Timer d) Lockout time e) Date settings (year/month/day) f) Time settings g) Minimum Character No. h) Password Complexity Setting RICOH Security Target Page 16 of 86 i) Operation Panel auto logout time j) WIM auto logout time k) Stored Reception File User l) Document user list m) Available function list n) User authentication method o) Device Certificate p) Network settings q) Audit transfer settings r) TOE Software 3.2.2.2 Confidential TSF Data 25 D.TSF.CONF is composed of the following data: a) Login password b) Audit log c) HDD cryptographic key 3.3 Threats 26 The following threats are mitigated by this TOE: Table 11: Threats Identifier Description T.UNAUTHORIZED_ ACCESS An attacker may access (read, modify, or delete) User Document Data or change (modify or delete) User Job Data in the TOE through one of the TOE’s interfaces. T.TSF_COMPROMISE An attacker may gain Unauthorized Access to TSF Data in the TOE through one of the TOE’s interfaces. T.TSF_FAILURE A malfunction of the TSF may cause loss of security if the TOE is permitted to operate. T.UNAUTHORIZED_UP DATE An attacker may cause the installation of unauthorized software on the TOE. T.NET_ COMPROMISE An attacker may access data in transit or otherwise compromise the security of the TOE by monitoring or manipulating network communication. 3.4 Assumptions 27 The following assumptions must be satisfied in order for the Security Objectives and Security Functional Requirements to be effective: RICOH Security Target Page 17 of 86 Table 12: Assumptions Identifier Description A.PHYSICAL Physical security, commensurate with the value of the TOE and the data it stores or processes, is assumed to be provided by the environment. A.NETWORK The Operational Environment is assumed to protect the TOE from direct, public access to its LAN interface. A.TRUSTED_ ADMIN TOE Administrators are trusted to administer the TOE according to site security policies. A.TRAINED_USERS Authorized Users are trained to use the TOE according to site security policies. 3.5 Organizational Security Policies 28 The following Organizational Security Policies (OSPs) are enforced by this TOE: Table 13: Organizational Security Policies Identifier Description P.AUTHORIZATION Users must be authorized before performing Document Processing and administrative functions. P.AUDIT Security-relevant activities must be audited and the log of such actions must be protected and transmitted to an External IT Entity. P.COMMS_PROTECTION The TOE must be able to identify itself to other devices on the LAN. P.STORAGE_ENCRYPTION If the TOE stores User Document Data or Confidential TSF Data on Field-Replaceable Non-volatile Storage Devices, it will encrypt such data on those devices. P.KEY_MATERIAL Cleartext keys, submasks, random numbers, or any other values that contribute to the creation of encryption keys for Field-Replaceable Nonvolatile Storage of User Document Data or Confidential TSF Data must be protected from unauthorized access and must not be stored on that storage device. P.FAX_FLOW If the TOE provides a PSTN fax function, it will ensure separation between the PSTN fax line and the LAN. P.IMAGE_OVERWRITE Upon completion or cancellation of a Document Processing job, the TOE shall overwrite residual image data from its Field- Replaceable Nonvolatile Storage Devices. RICOH Security Target Page 18 of 86 4 Security Objectives 29 The following Security Objectives are satisfied by this TOE: Table 14: Security Objectives for the TOE Identifier Description O.USER_I&A The TOE shall perform identification and authentication of Users for operations that require access control, User authorization, or Administrator roles. O.ACCESS_CONTROL The TOE shall enforce access controls to protect User Data and TSF Data in accordance with security policies. O.USER_AUTHORIZATION The TOE shall perform authorization of Users in accordance with security policies. O.ADMIN_ROLES The TOE shall ensure that only authorized Administrators are permitted to perform administrator functions. O.UPDATE_VERIFICATION The TOE shall provide mechanisms to verify the authenticity of software updates. O.TSF_SELF_TEST The TOE shall test some subset of its security functionality to help ensure that subset is operating properly. O.COMMS_PROTECTION The TOE shall generate audit data, and be capable of sending it to a trusted External IT Entity. Optionally, it may store audit data in the TOE. O.AUDIT The TOE shall generate audit data, and be capable of sending it to a trusted External IT Entity. Optionally, it may store audit data in the TOE. O.STORAGE_ENCRYPTION If the TOE stores User Document Data or Confidential TSF Data in Field-Replaceable Nonvolatile Storage devices, then the TOE shall encrypt such data on those devices. O.KEY_MATERIAL The TOE shall protect from unauthorized access any cleartext keys, submasks, random numbers, or other values that contribute to the creation of encryption keys for storage of User Document Data or Confidential TSF Data in Field-Replaceable Nonvolatile Storage Devices; The TOE shall ensure that such key material is not stored in cleartext on the storage device that uses that material. O.FAX_NET_SEPARATION If the TOE provides a PSTN fax function, then the TOE shall ensure separation of the PSTN fax telephone line and the LAN, by system design or active security function. O.IMAGE_OVERWRITE Upon completion or cancellation of a Document Processing job, the TOE shall overwrite residual image data from its Field- Replaceable Nonvolatile Storage Devices. RICOH Security Target Page 19 of 86 30 The following Security Objectives must be satisfied by the TOE’s Operational Environment. Table 15: Security Objectives for the Operational Environment Identifier Description OE.PHYSICAL_PROTECTION The Operational Environment shall provide physical security, commensurate with the value of the TOE and the data it stores or processes. OE.NETWORK PROTECTION The Operational Environment shall provide network security to protect the TOE from direct, public access to its LAN interface. OE.ADMIN_TRUST The TOE Owner shall establish trust that Administrators will not use their privileges for malicious purposes. OE.USER_TRAINING The TOE Owner shall ensure that Users are aware of site security policies and have the competence to follow them. OE.ADMIN_TRAINING The TOE Owner shall ensure that Administrators are aware of site security policies and have the competence to use manufacturer’s guidance to correctly configure the TOE and protect passwords and keys accordingly. RICOH Security Target Page 20 of 86 5 Security Requirements 5.1 Conventions 31 This document uses the following font conventions to identify the operations defined by the CC: c) Assignment. Indicated with italicized text. d) Refinement. Indicated with bold text and strikethroughs. e) Selection. Indicated with underlined text. f) Assignment within a Selection: Indicated with italicized and underlined text. g) Iteration. Indicated by adding letter in parentheses for iterations completed in the PP. Iterations completed in the ST are identified by adding a string starting “/” (e.g. “FCS_CKM.1(b)/DIM” Note: operations performed within the Security Target are denoted within brackets []. Operations shown without brackets are reproduced from the HCDPP. 5.2 Extended Components Definition 32 Refer to Annex A: Extended Components Definition. 5.3 Functional Requirements Table 16: Summary of SFRs Requirement Title FAU_GEN.1 Audit Data Generation FAU_GEN.2 User Identity Association FAU_SAR.1 Audit Review FAU_SAR.2 Restricted Audit Review FAU_STG.1 Protected Audit Trail Storage FAU_STG_EXT.1 Protected Audit Event Storage FAU_STG.4 Prevention of Audit Data Loss FCS_CKM.1(a) Cryptographic Key Generation (for asymmetric keys) FCS_CKM.1(b)/DAR Cryptographic Key Generation (for Symmetric keys) [Data At Rest] FCS_CKM.1(b)/DIM Cryptographic Key Generation (for Symmetric keys) [Data In Motion] FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction RICOH Security Target Page 21 of 86 Requirement Title FCS_CKM.4 Cryptographic Key Destruction FCS_COP.1(a) Cryptographic Operation (Symmetric Encryption/Decryption) FCS_COP.1(b) Cryptographic Operation (Signature Generation and Verification) FCS_COP.1(c)/L1 Cryptographic Operation (Hash Algorithm) FCS_COP.1(c)/L2 Cryptographic Operation (Hash Algorithm) FCS_COP.1(d) Cryptographic Operation (AES Data Encryption/Decryption) FCS_COP.1(f) Cryptographic Operation (Key Encryption) FCS_COP.1(g) Cryptographic Operation (for keyed-hash message authentication) FCS_HTTPS_EXT.1 Extended: HTTPS selected FCS_IPSEC_EXT.1 Extended: IPsec selected FCS_KYC_EXT.1 Extended: Key Chaining FCS_RBG EXT.1 Extended: Cryptographic Operation (Random Bit Generation) FCS_TLS_EXT.1 Extended: TLS selected FDP_ACC.1 Subset Access Control FDP_ACF.1 Security attribute based access control FDP_DSK_EXT.1 Extended: Protection of Data on Disk FDP_FXS_EXT.1 Extended: Fax separation FDP_RIP.1(a) Subset residual information protection FIA_AFL.1 Authentication Failure Management FIA_ATD.1 User attribute definition FIA_PMG_EXT.1 Extended Password Management FIA_PSK_EXT.1 Extended: Pre-Shared Key Composition FIA_UAU.1 Timing of authentication FIA_UAU.7 Protected Authentication Feedback FIA_UID.1 Timing of identification RICOH Security Target Page 22 of 86 Requirement Title FIA_USB.1 User-subject binding FMT_MOF.1 Management of security functions behavior FMT_MSA.1 Management of security attributes FMT_MSA.3 Static attribute initialization FMT_MTD.1 Management of TSF Data FMT_SMF.1 Specification of Management Functions FMT_SMR.1 Restrictions on Security Roles FPT_KYP_EXT.1 Extended: Protection of Key and Key Material FPT_SKP_EXT.1 Extended: Protection of TSF Data FPT_STM.1 Reliable Time Stamps FPT_TST_EXT.1 Extended: TSF testing FPT_TUD_EXT.1 Extended: Trusted update FTA_SSL.3 TSF-initiated Termination FTP_ITC.1/TLS Inter-TSF trusted channel FTP_ITC.1/IPsec Inter-TSF trusted channel FTP_TRP.1(a) Trusted Path (for Administrators) FTP_TRP.1(b) Trusted Path (for Non-administrators) 5.3.1 Security Audit (FAU) FAU_GEN.1 Audit Data Generation FAU_GEN.1.1 The TSF shall be able to generate an audit record of the following auditable events: a) Start-up and shutdown of the audit functions; b) All auditable events for the not specified level of audit; c) All auditable events specified in Table 17: Audit Events, [no other auditable events]. FAU_GEN.1.2 The TSF shall record within each audit record at least the following information: RICOH Security Target Page 23 of 86 a) Date and time of the event, type of event, subject identity (if applicable), and the outcome (success or failure) of the event; and b) For each audit event type, based on the auditable event definitions of the functional components included in the PP/ST, additional information specified in Table 17, [no other audit relevant information]. Table 17: Audit Events Auditable Event Relevant SFR Additional information Job completion FDP_ACF.1 Type of job Unsuccessful User authentication FIA_UAU.1 None Unsuccessful User identification FIA_UID.1 None Use of management functions FMT_SMF.1 None Modification to the group of Users that are part of a role FMT_SMR.1 None Changes to the time FPT_STM.1 None Failure to establish session FTP_ITC.1, FTP_TRP.1(a), FTP_TRP.1(b) Reason for failure FAU_GEN.2 User Identity Association FAU_GEN.2.1 For audit events resulting from actions of identified users, the TSF shall be able to associate each auditable event with the identity of the user that caused the event. FAU_SAR.1 Audit Review FAU_SAR.1.1 The TSF shall provide [U.ADMIN] with the capability to read all records from the audit records. FAU_SAR.1.2 The TSF shall provide the audit records in a manner suitable for the user to interpret the information. FAU_SAR.2 Restricted Audit Review FAU_SAR.2.1 The TSF shall prohibit all users read access to the audit records, except those users that have been granted explicit read-access. FAU_STG.1 Protected Audit Trail Storage RICOH Security Target Page 24 of 86 FAU_STG1.1 The TSF shall protect the stored audit records in the audit trail from unauthorised deletion. FAU_STG1.2 The TSF shall be able to prevent unauthorised modifications to the stored audit records in the audit trail. FAU_STG_EXT.1 Protected Audit Event Storage FAU_STG_EXT.1.1 The TSF shall be able to transmit the generated audit data to an external IT entity using a trusted channel according to FTP_ITC.1. FAU_STG.4 Prevention of Audit Data Loss FAU_STG.4.1 Refinement The TSF shall [overwrite the oldest stored audit records] and [no other actions] if the audit trail is full. 5.3.2 Cryptographic Support (FCS) FCS_CKM.1(a) Cryptographic Key Generation (for asymmetric keys) FCS_CKM.1.1(a) Refinement The TSF shall generate asymmetric cryptographic keys used for key establishment in accordance with [ • NIST Special Publication 800-56A, “Recommendation for Pair-Wise Key Establishment Schemes Using Discrete Logarithm Cryptography” for finite field-based key establishment schemes; • NIST Special Publication 800-56A, “Recommendation for Pair-Wise Key Establishment Schemes Using Discrete Logarithm Cryptography” for elliptic curve-based key establishment schemes and implementing “NIST curves” P256, P-384 and [P-521] (as defined in FIPS PUB 186-4, “Digital Signature Standard”) ] and specified cryptographic key sizes equivalent to, or greater than, a symmetric key strength of 112 bits. FCS_CKM.1(b)/DAR Cryptographic Key Generation (Symmetric keys)/Data At Rest FCS_CKM.1.1(b)/DAR Refinement The TSF shall generate symmetric cryptographic keys using a Random Bit Generator as specified in FCS_RBG_EXT.1 and specified cryptographic key sizes [256 bit] that meet the following: No Standard. FCS_CKM.1(b)/DIM Cryptographic Key Generation (Symmetric keys)/Data In Motion FCS_CKM.1.1(b)/DIM Refinement The TSF shall generate symmetric cryptographic keys using a Random Bit Generator as specified in FCS_RBG_EXT.1 and specified cryptographic key sizes [128 bit, 256 bit] that meet the following: No Standard. RICOH Security Target Page 25 of 86 FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction FCS_CKM.4.1 Refinement The TSF shall destroy all plaintext secret and private cryptographic keys and cryptographic critical security parameters when no longer needed. FCS_CKM.4 Cryptographic Key Destruction FCS_CKM.4.1 Refinement The TSF shall destroy cryptographic keys in accordance with a specified cryptographic key destruction method [ • For volatile memory, the destruction shall be executed by [selection: removal of power to the memory]; • For nonvolatile storage, the destruction shall be executed by a [ [single] overwrite consisting of [a new value of a key of the same size]]; ] that meets the following: No Standard. Application Note: This SFR is altered by TD0261. FCS_COP.1(a) Cryptographic Operation (Symmetric Encryption/Decryption) FCS_COP.1.1(a) Refinement The TSF shall perform encryption and decryption in accordance with a specified cryptographic algorithm AES operating in [CBC mode, GCM mode] and cryptographic key sizes 128-bits and 256-bits that meets the following: • FIPS PUB 197, “Advanced Encryption Standard (AES)” • [NIST SP 800-38A, NIST SP 800-38D] FCS_COP.1(b) Cryptographic Operation (for Signature Generation/ Verification) FCS_COP.1.1(b) Refinement The TSF shall perform cryptographic signature services in accordance with a [ • RSA Digital Signature Algorithm (rDSA) with key sizes (modulus) of [2048 bits]] • Elliptic Curve Digital Signature Algorithm (ECDSA) with key size of [256 bits or greater]] that meets the following: [ Case: RSA Digital Signature Algorithm: • FIPS PUB 186-4, “Digital Signature Standard” Case: ECDSA Digital Signature Algorithm: • FIPS PUB 186-4, “Digital Signature Standard” • The TSF shall implement “NIST curves” P-256, P384 and [P521] (as defined in FIPS PUB 186-4, “Digital Signature Standard”).] RICOH Security Target Page 26 of 86 FCS_COP.1(c)/L1 Cryptographic Operation (Hash Algorithm) FCS_COP.1.1(c) Refinement The TSF shall perform cryptographic hashing services in accordance with [SHA-1] that meet the following: [ISO/IEC 10118- 3:2004]. FCS_COP.1(c)/L2 Cryptographic Operation (Hash Algorithm) FCS_COP.1.1(c) Refinement The TSF shall perform cryptographic hashing services in accordance with [SHA-256, SHA-384, SHA-512] that meet the following: [ISO/IEC 10118-3:2004]. FCS_COP.1(d) Cryptographic Operation (AES Data Encryption/Decryption) FCS_COP.1.1(d) The TSF shall perform data encryption and decryption in accordance with a specified cryptographic algorithm AES used in [CBC] mode and cryptographic key sizes [256 bits] that meet the following: AES as specified in ISO/IEC 18033-3, [CBC as specified in ISO/IEC 10116]. FCS_COP.1(f) Cryptographic Operation (Key Encryption) FCS_COP.1.1(f) Refinement The TSF shall perform key encryption and decryption in accordance with a specified cryptographic algorithm AES used in [[CBC] mode] and cryptographic key sizes [256 bits] that meet the following: AES as specified in ISO /IEC 18033-3, [CBC as specified in ISO/IEC 10116]. FCS_COP.1(g) Cryptographic Operation (for keyed-hash message authentication) FCS_COP.1.1(g) Refinement The TSF shall perform keyed-hash message authentication in accordance with a specified cryptographic algorithm HMAC-[SHA-256, SHA-384, SHA-512], key size [64 (when using SHA-256), 128 (when using SHA-384 or SHA-512)], and message digest sizes [256, 384, 512] bits that meet the following: FIPS PUB 198-1, "The Keyed-Hash Message Authentication Code, and FIPS PUB 180-3, “Secure Hash Standard.” FCS_HTTPS_EXT.1 Extended: HTTPS selected FCS_HTTPS_EXT.1.1 The TSF shall implement the HTTPS protocol that complies with RFC 2818. FCS_HTTPS_EXT.1.2 The TSF shall implement the HTTPS protocol using TLS as specified in FCS_TLS_EXT.1. FCS_IPSEC_EXT.1 Extended: IPsec selected FCS_IPSEC_EXT.1.1 The TSF shall implement the IPsec architecture as specified in RFC 4301. RICOH Security Target Page 27 of 86 FCS_IPSEC_EXT.1.2 The TSF shall implement [transport mode]. FCS_IPSEC_EXT.1.3 The TSF shall have a nominal, final entry in the SPD that matches anything that is otherwise unmatched and discards it. FCS_IPSEC_EXT.1.4 The TSF shall implement the IPsec protocol ESP as defined by RFC 4303 using [the cryptographic algorithms AES-CBC-128 (as specified by RFC 3602) together with a Secure Hash Algorithm (SHA)-based HMAC, AES-CBC256 (as specified by RFC 3602) together with a Secure Hash Algorithm (SHA)-based HMAC]. FCS_IPSEC_EXT.1.5 The TSF shall implement the protocol: [IKEv1, using Main Mode for Phase 1 exchanges, as defined in RFCs 2407, 2408, 2409, RFC 4109, [no other RFCs for extended sequence numbers], and [RFC 4868 for hash functions];]. FCS_IPSEC_EXT.1.6 The TSF shall ensure the encrypted payload in the [IKEv1] protocol uses the cryptographic algorithms [no other algorithm]. FCS_IPSEC_EXT.1.7 The TSF shall ensure that IKEv1 Phase 1 exchanges use only main mode. FCS_IPSEC_EXT.1.8 The TSF shall ensure that [IKEv1 SA lifetimes can be established based on [length of time, where the time values can be limited to: 24 hours for Phase 1 SAs and 8 hours for Phase 2 SAs]] FCS_IPSEC_EXT.1.9 The TSF shall ensure that all IKE protocols implement DH Groups 14 (2048-bit MODP), and [[No other DH groups]]. FCS_IPSEC_EXT.1.10 The TSF shall ensure that all IKE protocols perform Peer Authentication using the [RSA] algorithm and Pre-shared Keys. Application Note: This SFR is altered by TD0157 FCS_KYC_EXT.1 Extended: Key Chaining FCS_KYC_EXT.1.1 The TSF shall maintain a key chain of: [intermediate keys originating from one or more submask(s) to the BEV or DEK using the following method(s): [key encryption as specified in FCS_COP.1(f)]] while maintaining an effective strength of [256 bits]. FCS_RBG_EXT.1 Extended: Cryptographic Operation (Random Bit Generation) FCS_RBG_EXT.1.1 The TSF shall perform all deterministic random bit generation services in accordance with [NIST SP 800-90A] using [Hash_DRBG (any SHA- 256)]. FCS_RBG_EXT.1.2 The deterministic RBG shall be seeded by at least one entropy source that accumulates entropy from [[one(1)] hardware-based noise source(s)] with a minimum of [256 bits] of entropy at least equal to the greatest security strength, according to ISO/IEC 18031:2011 Table C.1 “Security Strength Table for Hash Functions”, of the keys and hashes that it will generate. RICOH Security Target Page 28 of 86 FCS_TLS_EXT.1 Extended: TLS selected FCS_TLS_EXT.1.1 The TSF shall implement one or more of the following protocols [TLS 1.2 (RFC 5246)] supporting the following cipher suites: [ • TLS_DHE_RSA_WITH_AES_128_CBC_ SHA256 • TLS_DHE_RSA_WITH_AES_256_CBC_ SHA256 • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384] Application Note: This SFR is altered by TD0474 5.3.3 User Data Protection (FDP) FDP_ACC.1 Subset access control FDP_ACC.1.1 Refinement The TSF shall enforce the User Data Access Control SFP on subjects, objects, and operations among subjects and objects specified in Table 2 and Table3 Table 18 and Table 19. FDP_ACF.1 Security attribute based access control FDP_ACF.1.1 Refinement The TSF shall enforce the User Data Access Control SFP to objects based on the following: subjects, objects, and attributes specified in Table 2 and Table3 Table 18 and Table 19. FDP_ACF.1.2 Refinement: The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: rules governing access among controlled subjects and controlled objects using controlled operations on controlled objects specified in Table 2 and Table3 Table 18 and Table 19. FDP_ACF.1.3 Refinement: The TSF shall explicitly authorise access of subjects to objects based on the following additional rules: [no additional rules]. FDP_ACF.1.4 Refinement: The TSF shall explicitly deny access of subjects to objects based on the following additional rules: [no additional rules]. Table 18: D.USER.DOC Access Control SFP "Create" "Read" "Modify" "Delete" Print (+PRT) Operation: Submit a document to be printed View image or Release printed output Modify stored document Delete stored document RICOH Security Target Page 29 of 86 "Create" "Read" "Modify" "Delete" Job owner Allowed (note 1) View: Allowed Release: allowed No function Allowed U.ADMIN No function View: no function Release: no function No function Allowed U.NORMAL Allowed Denied Denied Denied Unauthentica ted (condition 1) Denied Denied Denied Scan (+SCN) Operation: Submit a document for scanning View scanned image Modify stored image Delete stored image Job owner Allowed (note 2) Allowed No function Allowed U.ADMIN No function No function No function Allowed U.NORMAL Allowed Denied Denied (No function) Denied (No function) Unauthentica ted Denied Denied Denied (No function) Denied (No function) Copy (+CPY) Operation: Submit a document for copying View scanned image or Release printed copy output Modify stored image Delete stored image Job owner Allowed (note 2) View: no function Release: no function No function No function U.ADMIN No function View: no function Release: no function No function No function U.NORMAL Allowed Denied Denied (No function) Denied (No function) RICOH Security Target Page 30 of 86 "Create" "Read" "Modify" "Delete" Unauthentica ted Denied Denied Denied (No function) Denied (No function) Fax send (+FAXOUT) Operation: Submit a document to send as a fax View scanned image Modify stored image Delete stored image Job owner Allowed (note 2) Allowed No function Allowed U.ADMIN No function No function No function Allowed U.NORMAL Allowed Denied Denied (No function) Denied (No function) Unauthentica ted Denied Denied Denied (No function) Denied (No function) Fax receive (+FAXIN) Operation: Receive a fax and store it View fax image or Release printed fax output Modify image of received fax Delete image of received fax Fax owner Allowed (note 3) View: allowed Release: allowed No function Allowed U.ADMIN Allowed (note 4) View: no function Release: no function No function No function U.NORMAL Allowed (note 4) Denied Denied Denied Unauthentica ted Allowed Denied Denied Denied Storage / retrieval (+DSR) Operation: Store document Retrieve stored document Modify stored document Delete stored document Job owner Allowed (note 1) Allowed Denied Allowed U.ADMIN No function Denied Denied Allowed RICOH Security Target Page 31 of 86 "Create" "Read" "Modify" "Delete" U.NORMAL Allowed Denied Denied Denied Unauthentica ted (condition 1) Denied Denied Denied Table 19: D.USER.JOB Access Control SFP "Create" "Read" "Modify" "Delete" Print (+PRT) Operation: Create print job View print queue / log Modify print job Cancel print job Job owner (note 1) Allowed No function Allowed U.ADMIN No function Allowed No function Allowed U.NORMAL Allowed Allowed Denied Denied Unauthentica ted Denied Allowed Denied Denied Scan (+SCN) Operation: Create scan job View scan status / log Modify scan job Cancel scan job Job owner (note 2) Allowed No function Allowed U.ADMIN No function Allowed No function Allowed U.NORMAL Allowed Allowed Denied Denied Unauthentica ted Denied Denied Denied Denied Copy (+CPY) Operation: Create copy job View copy status / log Modify copy job Cancel copy job Job owner (note 2) Allowed No function Allowed U.ADMIN No function Allowed No function Denied U.NORMAL Allowed Allowed Denied Denied Unauthentica ted Denied Denied Denied Denied Fax send (+FAXOUT) Operation: Create fax send job View fax job queue / log Modify fax send job Cancel fax send job Job owner (note 2) Allowed Allowed no function U.ADMIN No function Allowed No function no function RICOH Security Target Page 32 of 86 "Create" "Read" "Modify" "Delete" U.NORMAL Allowed Allowed Denied Denied Unauthentica ted Denied Denied Denied Denied Fax receive (+FAXIN) Operation: Create fax receive job View fax receive status / log Modify fax receive job Cancel fax receive job Fax owner (note 3) Allowed No Function Allowed U.ADMIN (note 4) Allowed No function Allowed U.NORMAL (note 4) Allowed Denied Denied Unauthentica ted Allowed Denied Denied Denied Storage / retrieval (+DSR) Operation: Create storage / retrieval job View storage / retrieval log Modify storage / retrieval job Cancel storage / retrieval job Job owner (note 1) Allowed No function No function U.ADMIN No function Allowed No function No function U.NORMAL Allowed Allowed Denied Denied Unauthentica ted (condition 1) Denied Denied Denied Application notes: Condition 1: Jobs submitted by unauthenticated users must contain a credential that the TOE can use to identify the Job Owner. See also the following Notes that are referenced in Table 2 and Table3 Table 18 and Table 19. Note 1: Job Owner is identified by a credential or assigned to an authorized User as part of the process of submitting a print or storage Job. Note 2: Job Owner is assigned to an authorized User as part of the process of initiating a scan, copy, fax send, or retrieval Job. Note 3: Job Owner of received faxes is assigned by default or configuration. Minimally, ownership of received faxes is assigned to a specific user or U.ADMIN role. Note 4: PSTN faxes are received from outside of the TOE, they are not initiated by Users of the TOE. Note 5: Viewing is not permitted and releasing the document is permitted. Note 6: Secure Fax must be enabled. FDP_DSK_EXT.1 Extended: Protection of Data on Disk RICOH Security Target Page 33 of 86 FDP_DSK_EXT.1.1 The TSF shall [perform encryption in accordance with FCS_COP.1(d)] such that any Field-Replaceable Nonvolatile Storage Device contains no plaintext User Document Data and no plaintext confidential TSF Data. FDP_DSK_EXT.1.2 The TSF shall encrypt all protected data without user intervention. FDP_FXS_EXT.1 Extended: Fax separation FDP_FXS_EXT.1.1 The TSF shall prohibit communication via the fax interface, except transmitting or receiving User Data using fax protocols. FDP_RIP.1(a) Subset residual information protection FDP_RIP.1.1(a) Refinement The TSF shall ensure that any previous information content of a resource is made unavailable by overwriting data upon the deallocation of the resource from the following objects: D.USER.DOC. 5.3.4 Identification and Authentication (FIA) FIA_AFL.1 Authentication Failure Management FIA_AFL.1.1 The TSF shall detect when [an administrator configurable positive integer within [1 to 10]] unsuccessful authentication attempts occur related to [ • User authentication using the Operation Panel • User authentication using WIM from the client computer • User authentication when printing from the client computer • User authentication when using LAN Fax from the client computer]. FIA_AFL.1.2 When the defined number of unsuccessful authentication attempts has been [met], the TSF shall [lock the user account for an administrator configurable time period, or until an administrator unlocks the account.]. Application Note: This SFR applies only to internal identification and authentication. FIA_ATD.1 User attribute definition FIA_ATD.1.1 The TSF shall maintain the following list of security attributes belonging to individual users: [Username, User Role, Available Functions List] FIA_PMG_EXT.1 Extended: Password Management FIA_PMG_EXT.1.1 The TSF shall provide the following password management capabilities for User passwords: a) Passwords shall be able to be composed of any combination of upper and lower case letters, numbers, and the following special characters: [ “!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, “)”, [[“"", “'", “+", “,", “-", “.", “/", “:", “;", “<", “=", “>", “?", “[", “\", “]", “_", “`", “{", “|", “}", “~"]]; RICOH Security Target Page 34 of 86 b) Minimum password length shall be settable by an Administrator, and have the capability to require passwords of 15 characters or greater; FIA_PSK_EXT.1 Extended: Pre-Shared Key Composition FIA_PSK_EXT.1.1 The TSF shall be able to use pre-shared keys for IPsec. FIA_PSK_EXT.1.2 The TSF shall be able to accept text-based pre-shared keys that are: • 22 characters in length and [1-32 characters]; • composed of any combination of upper and lower case letters, numbers, and special characters (that include: “!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, and “)”). FIA_PSK_EXT.1.3 The TSF shall condition the text-based pre-shared keys by using [SHA- 256] and be able to [use no other pre-shared keys]. FIA_UAU.1 Timing of authentication FIA_UAU.1.1 Refinement The TSF shall allow [the viewing of the list of user jobs, WIM Help, system status, counter and information of inquiries, and creation of fax reception and print jobs] on behalf of the user to be performed before the user is authenticated. FIA_UAU.1.2 The TSF shall require each user to be successfully authenticated before allowing any other TSF-mediated actions on behalf of that user. FIA_UAU.7 Protected Authentication Feedback FIA_UAU.7.1 The TSF shall provide only [displaying dummy characters as authentication feedback on the Operation Panel and through WIM] to the user while the authentication is in progress. FIA_UID.1 Timing of identification FIA_UID.1.1 Refinement The TSF shall allow [the viewing of the list of user jobs, WIM Help, system status, counter and information of inquiries, creation of fax reception jobs, and creation of print jobs] on behalf of the user to be performed before the user is identified. FIA_UID.1.2 The TSF shall require each user to be successfully identified before allowing any other TSF-mediated actions on behalf of that user. FIA_USB.1 User-subject binding FIA_USB.1.1 The TSF shall associate the following user security attributes with subjects acting on the behalf of that user: [username, available function list, and user role]. FIA_USB.1.2 The TSF shall enforce the following rules on the initial association of user security attributes with subjects acting on the behalf of users: [an RICOH Security Target Page 35 of 86 Available functions list is associated with the user after the user is authenticated, and the set of available functions does not change during the user session.] FIA_USB.1.3 The TSF shall enforce the following rules governing changes to the user security attributes associated with subjects acting on the behalf of users: [none]. 5.3.5 Security Management (FMT) FMT_MOF.1 Management of security functions behavior FMT_MOF.1.1 Refinement The TSF shall restrict the ability to [determine the behaviour of, disable, enable, modify the behaviour of] the functions [listed in Table 20] to U.ADMIN. FMT_MSA.1 Management of security attributes FMT_MSA.1.1 Refinement The TSF shall enforce the User Data Access Control SFP to restrict the ability to [query, modify] the security attributes [username available function list, user role]to [U.ADMIN]. FMT_MSA.3 Static attribute initialization FMT_MSA.3.1 Refinement The TSF shall enforce the User Data Access Control SFP to provide [permissive] default values for security attributes that are used to enforce the SFP. FMT_MSA.3.2 Refinement The TSF shall allow the [U.ADMIN] to specify alternative initial values to override the default values when an object or information is created. FMT_MTD.1 Management of TSF data FMT_MTD.1.1 Refinement The TSF shall restrict the ability to perform the specified operations on the specified TSF Data to the roles specified in Table 4 Table 20 Table 20: Management of TSF Data Data Operation Interfaces Authorized Role(s) TSF Data owned by U.NORMAL or associated with documents or jobs owned by U.NORMAL. Login password for authenticated user Modify Operation Panel, WIM The Owning U.NORMAL or U.ADMIN TSF Data not owned by a U.NORMAL Audit Logs Delete, export WIM U.ADMIN RICOH Security Target Page 36 of 86 Data Operation Interfaces Authorized Role(s) Login passwords of U.ADMIN user Modify Operation Panel, WIM U.ADMIN Username, user role, available function list or access permissions of U.NORMAL Users Modify Operation Panel, WIM U.ADMIN HDD Cryptographic Key Create, Delete Operation Panel U.ADMIN Software, firmware, and related configuration data Audit Transfer Settings Modify Operation Panel, WIM U.ADMIN Date & Time Settings Modify WIM U.ADMIN Password Length and Password complexity settings Modify Operation Panel, WIM U.ADMIN Operation Panel Auto logout settings Modify Operation Panel, WIM U.ADMIN WIM Auto logout settings Modify WIM U.ADMIN PSTN Fax-Line Separation - Stored Reception File User Modify Operation Panel U.ADMIN Device Certificate Create, Query, Modify, Delete Operation Panel, WIM U.ADMIN TOE Software updates Modify WIM U.ADMIN Network settings for trusted communication Modify Operation Panel, WIM U.ADMIN FMT_SMF.1 Specification of Management Functions FMT_SMF.1.1 Refinement The TSF shall be capable of performing the following management functions: [management functions listed in Table 21. RICOH Security Target Page 37 of 86 Table 21: Management Functions Management Functions Operation Interface(s) Manage user accounts (users, roles, privileges and available functions list) Create, modify, delete Operation Panel, WIM Manage the document user list for stored documents Create, modify Operation Panel, WIM Configure audit transfer settings Modify WIM Manage audit logs Delete, export Operation Panel, WIM Manage Audit Functions Enable, Disable Operation Panel, WIM Manage time and date settings Modify Operation Panel, WIM Configure minimum password length Modify Operation Panel, WIM Configure Password complexity settings Modify Operation Panel, WIM Configure Operation Panel Auto Logout Time Modify Operation Panel, WIM Configure WIM Auto Logout Time Modify WIM Configure number of authentication failure before account lockout Modify WIM Configure account release timer settings Modify WIM Configure PSTN Fax-Line Separation Stored Reception File User Modify Operation Panel, WIM Configure image overwrite Modify Operation Panel, WIM Configure network settings for trusted communications (specify IP addresses and port to connect to the TOE) Modify Operation Panel, WIM Manage HDD Cryptographic key Create Delete Operation Panel Manage Device Certificates Create, query, modify, delete, upload, download Operation Panel, WIM RICOH Security Target Page 38 of 86 Management Functions Operation Interface(s) Manage TOE Trusted Update Query, Modify WIM Configure IPSec Modify WIM Configure SMTP over IPSec Modify WIM Configure NTP Modify WIM Manage user accounts (Ability to login) Unlock WIM FMT_SMR.1 Restrictions on Security Roles FMT_SMR.1.1 Refinement The TSF shall maintain the roles U.ADMIN, U.NORMAL. FMT_SMR.1.2 The TSF shall be able to associate users with roles. 5.3.6 Protection of the TSF (FPT) FPT_KYP_EXT.1 Extended: Protection of Key and Key Material FPT_ KYP _EXT.1.1 The TSF shall not store plaintext keys that are part of the keychain specified by FCS_KYC_EXT.1 in any Field-Replaceable Nonvolatile Storage Device. FPT_SKP_EXT.1 Extended: Protection of TSF Data FPT_SKP_EXT.1.1 The TSF shall prevent reading of all pre-shared keys, symmetric keys, and private keys. FPT_STM.1 Reliable Time Stamps FPT_STM.1.1 The TSF shall be able to provide reliable time stamps. FPT_TST_EXT.1 Extended: TSF testing FPT_TST_EXT.1.1 The TSF shall run a suite of the following self-tests during initial start-up (and power on) to demonstrate the correct operation of the TSF. FPT_TUD_EXT.1 Extended: Trusted update FPT_TUD_EXT.1.1 The TSF shall provide authorized administrators the ability to query the current version of the TOE firmware/software. FPT_TUD_EXT.1.2 The TSF shall provide authorized administrators the ability to initiate updates to TOE firmware/software. RICOH Security Target Page 39 of 86 FPT_TUD_EXT.1.3 The TSF shall provide a means to verify firmware/software updates to the TOE using a digital signature mechanism and [no other functions] prior to installing those updates. 5.3.7 TOE Access (FTA) FTA_SSL.3 TSF-initiated Termination FTA_SSL.3.1 The TSF shall terminate interactive session after a [lapse of Operation Panel auto logout time, lapse of WIM auto logout time, completion of document data reception from the printer driver, and completion of document data reception from the fax driver]. 5.3.8 Trusted path/channels (FTP) FTP_ITC.1/TLS Inter-TSF trusted channel FTP_ITC.1.1/TLS Refinement The TSF shall use [TLS] to provide a trusted communication channel between itself and authorized IT entities supporting the following capabilities: [[syslog, SMTP]] that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from disclosure and detection of modification of the channel data. FTP_ITC.1.2/TLS Refinement The TSF shall permit the TSF, or the authorized IT entities, to initiate communication via the trusted channel. FTP_ITC.1.3/TLS Refinement The TSF shall initiate communication via the trusted channel for [communication via the LAN of document data, function data, protected data, and confidential data]. FTP_ITC.1/IPsec Inter-TSF trusted channel FTP_ITC.1.1/IPsec Refinement The TSF shall use [IPsec] to provide a trusted communication channel between itself and authorized IT entities supporting the following capabilities: [[LDAP, FTP, NTP, syslog, and SMTP]] that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from disclosure and detection of modification of the channel data. FTP_ITC.1.2/IPsec Refinement The TSF shall permit the TSF, or the authorized IT entities, to initiate communication via the trusted channel. FTP_ITC.1.3/IPsec Refinement The TSF shall initiate communication via the trusted channel for [communication via the LAN of document data, function data, protected data, and confidential data]. FTP_TRP.1(a) Trusted Path (for Administrators) FTP_TRP.1.1(a) Refinement The TSF shall use [TLS/HTTPS] to provide a trusted communication path between itself and remote administrators that is RICOH Security Target Page 40 of 86 logically distinct from other communication paths and provides assured identification of its end points and protection of the communicated data from disclosure and detection of modification of the communicated data. FTP_TRP.1.2(a) Refinement The TSF shall permit remote administrators to initiate communication via the trusted path. FTP_TRP.1.3(a) Refinement The TSF shall require the use of the trusted path for initial administrator authentication and all remote administration actions. FTP_TRP.1(b) Trusted Path (for Non-administrators) FTP_TRP.1.1(b) Refinement The TSF shall use [TLS/HTTPS] to provide a trusted communication path between itself and remote users that is logically distinct from other communication paths and provides assured identification of its end points and protection of the communicated data from disclosure and detection of modification of the communicated data. FTP_TRP.1.2(b) Refinement The TSF shall permit [the TSF, remote users] to initiate communication via the trusted path. FTP_TRP.1.3(b) Refinement The TSF shall require the use of the trusted path for initial user authentication and all remote actions. RICOH Security Target Page 41 of 86 5.4 Assurance Requirements 33 The TOE security assurance requirements are summarized in Table 22. See Annex B for Security Assurance Requirements description. Table 22: TOE Security Assurance Requirements Assurance Class Components Description Security Target Evaluation ASE_CCL.1 Conformance Claims ASE_ECD.1 Extended Components Definition ASE_INT.1 ST Introduction ASE_OBJ.1 Security Objectives for the operational environment ASE_REQ.1 Stated Security Requirements ASE_SPD.1 Security Problem Definition ASE_TSS.1 TOE Summary Specification Development ADV_FSP.1 Basic Functional Specification Guidance Documents AGD_OPE.1 Operational User Guidance AGD_PRE.1 Preparative procedures Life Cycle Support ALC_CMC.1 Labelling of the TOE ALC_CMS.1 TOE CM Coverage Tests ATE_IND.1 Independent Testing - conformance Vulnerability Assessment AVA_VAN.1 Vulnerability survey RICOH Security Target Page 42 of 86 6 TOE Summary Specification 34 The following describes how the TOE fulfils each SFR included in section 5.3. 6.1 Security Audit 6.1.1 FAU_GEN.1 & FAU_GEN.2 35 The TOE records an audit log of events listed in Table 23. Audit log entries record the date and time of the event, type of event, subject identity (if applicable), and the outcome (success or failure) of the event. Additionally, Job Completion events record the type of job, and Failure to Establish Session events record the reason for such failure. Table 23: List of Audit Events Auditable event requirements Auditable events satisfied Start-up and shutdown of the audit functions Start-up of the Audit Function Shutdown of the Audit Function Job completion Printing via networks LAN Fax via networks Scanning documents Copying documents Receiving incoming faxes Creating document data (storing) Reading document data (print, download, fax transmission) Deleting document data Unsuccessful User authentication, Unsuccessful User identification Failure of login operations Use of management functions Use of functions identified in FMT_SMF.1 Modification to the group of Users that are part of a role Modification of MFP Administrator roles Changes to the time Date settings (year/month/day), time settings (hour/minute) Failure to establish session Failure of communication with the audit server RICOH Security Target Page 43 of 86 Auditable event requirements Auditable events satisfied Failure of communication with the authentication server Failure of communication with the FTP server Failure of communication with the NTP server Failure of communication with print driver Failure of communication with fax driver Failure of communication with WIM 6.1.2 FAU_STG.1, FAU_STG_EXT.1, FAU_STG.4, FAU_SAR.1, FAU_SAR.2, FTP_ITC.1/IPsec and FTP_ITC.1/TLS 36 The TOE stores audit log data in a dedicated storage area of the HDD. Audit records are buffered in that storage area before transfer to a configured remote syslog server over a configured TLS or an IPsec trusted channel. 37 Authorized administrators use the WIM to review the audit trail and to initiate transfer of audit records. The TOE prevents unauthorized access to the audit records by ensuring that the options to manage the audit function and the audit records are not included in the lists of available functions visible to the U.NORMAL users. 38 The TOE audit trail comprises three types of audit logs: Job logs, Access logs, and Ecology logs. By default, the job and ecology logs will each hold a maximum of 4,000 records; the access log can have a maximum of 12,000 records. When a maximum number of records is reached, the records are overwritten based on the following criteria: a) When syslog audit transfers are working, the oldest records which have been transferred to the syslog server are overwritten first. b) If none of the logs have been transferred to the audit server, the oldest records are overwritten first. 6.2 Identification and Authentication 6.2.1 FIA_UAU.1, FIA_UID.1, FIA_UAU.7, FIA_ATD.1 & FIA_USB.1 39 For each individual user, the TOE maintains the user attributes: username, password, user role and available functions list regardless of the authentication method for the user account. Users login to the TOE by entering their username/password credentials on the Operation Panel, the WIM login screen, or through a client’s print driver or fax driver that has been configured to submit user credentials. 40 When users enter their passwords on the Operation Panel or the WIM login, the TOE displays a sequence of dummy characters whose length is the same as that of the entered password. RICOH Security Target Page 44 of 86 41 All users accessing the TOE user interfaces are identified and authenticated before they are allowed access. Only the following functions are accessible before the user is authenticated: a) Viewing user job lists, WIM Help, system status, the counter and information of inquiries. b) Creation of fax reception jobs. c) Creation of print jobs 42 The TOE authenticates users by checking the entered username/passwords credentials against the local user database or against an external authentication service (LDAP). 43 An available functions list that identifies the basic hardcopy functions a user is permitted to perform is associated with each Normal User. After successful login, users are authorized to perform functions according to their assigned user role (Normal User, MFP Administrator, or MFP Supervisor). If login fails, the user is not denied access to all functions that require user authentication. 6.2.2 FIA_PMG_EXT.1 44 For authentication within the TOE, login passwords for users can be registered only if these passwords meet the conditions specified by the selections in FIA_PMG_EXT.1. 6.2.3 FIA_AFL.1 & FTA_SSL.3 45 The TOE counts consecutive login failures for a given login name and will locks out that user after an administrator-configured number of authentication failures attempts have been reached. For the U.NORMAL users, the account lockout is released when the configured lockout time has elapsed or by direct release operation performed by the MFP administrator. For the U.ADMIN users, the account lockout is released when the configured lockout time has elapsed, or by direct release operation performed by the MFP Administrator or MFP Supervisor, or by elapse of a given time after the TOE restarts. 46 The TOE can terminate user sessions at the various interfaces as follow: h) Operation Panel: the user is logged out of the TOE when inactivity reaches the Operation Panel auto logout time (settable from 10 to 999 seconds). i) WIM: the user is logged out of the TOE when inactivity reaches the WIM auto logout time (settable from 3 to 60 minutes). j) Printer driver: the user is logged out of the TOE immediately after receiving the print data from the printer driver. k) Fax driver: the user is logged out of the TOE immediately after receiving the transmission information from the fax driver. 6.3 Access Control 6.3.1 FDP_ACC.1 & FDP_ACF.1 47 The TOE controls user operations for document data and user jobs as specified in Table 18 and Table 19. RICOH Security Target Page 45 of 86 6.3.1.1 Access control rule on document data 48 The TOE provides users with the ability to perform operations on document data that are stored in the TOE. 49 Normal Users are permitted to operate on document data if the ID of the user corresponds to the Document User List for that document (i.e., the user is the "Job Owner"). A Normal User is not permitted to operate on document data for which it is not the Job Owner. 50 A Normal User who is a Job Owner may print, download to client computers, send by fax, send by e-mail as attachments, and delete stored documents, using the Operation Panel or a web browser. 51 The TOE allows only the Job Owner to view and delete the document data handled as a user job while Copy Function, Printer Function, Scanner Function, Fax Function, or Document Server Function is being used. 52 While no interface to change job owners is provided, an interface to cancel user jobs is provided. If a user job is cancelled, any document the cancelled job operates will be deleted. Table 24: Stored Documents Access Control Rules for Normal Users Function User interface Type of document Operations permitted for authorized users Printer Operation Panel +PRT Print Delete Printer Web browser +PRT Delete Scanner Operation Panel +SCN E-mail transmission Fax Operation Panel +FAXIN Print Delete Fax Web browser +FAXIN Download Delete (Operations above are permitted only if Normal Users are authorized to use Document Server Function) Document Server Operation Panel +DSR Print Delete Document Server Operation Panel +FAXOUT Print Delete Document Server Web browser +DSR Delete Document Server Web browser +FAXOUT Fax transmission Download RICOH Security Target Page 46 of 86 Function User interface Type of document Operations permitted for authorized users Delete (Fax transmission is permitted for Normal Users who are authorized to use Fax Function) 53 MFP Administrators are not permitted to print, download, or send stored documents. MFP Administrators may delete stored documents, using the Operation Panel, web browser, or indirectly by cancelling a job. 54 The MFP Supervisor is not permitted to perform any document operations. 6.3.1.2 Access control rule on user jobs 55 The TOE displays on the Operation Panel a menu to cancel a user job only if the user who logs in from the Operation Panel is a Job Owner or MFP Administrator and a cancellation of a user job is attempted by the Job Owner or an MFP Administrator. Other users are not allowed to operate user jobs. 56 When a user job is cancelled, any documents operated by the cancelled job will be deleted. However, if the document data operated by the cancelled user job is a stored document, the data will not be deleted and remain stored in the TOE. 6.4 Cryptographic Operations 6.4.1 FCS_CKM.1 (a), FCS_CKM.1(b)/DIM, FCS_CKM.1(b)/DAR, FCS_RBG_EXT.1. 57 The TOE implements random-bit generation services using a software based-based DRGB that has been seeded with at least 256-bits of entropy from a third-party hardware-based TRNG and DRBG. Table 25: Random Number Sources RNG Method Standard RNG Hardware TRNG True RNG + DRBG AIS31 Class 2 Hardware TRNG Software DRBG Hash_DRBG_SH A256 SP 800-90A Software DRBG 58 The TOE generates cryptographic keys upon initial start-up, as a result of administrative actions and during communication sessions. Using a Hash-DRBG, the TOE generates a KEK, HDD Key, NVRAM Key and DevCert Key, which it uses for data encryption; TLS session keys, IPsec IKE key and ESP key which it uses for trusted communications. For all encryption operations the TOE uses AES 256 in CBC mode and the following cryptographic keys: a) FFC DH Groups 14 (2048-bit MODP) b) ECDHE P-256, P-384, P-521 c) RSA 2048 RICOH Security Target Page 47 of 86 d) 128-bit and 256-bit symmetric keys 59 Additional details about key creation, the TRNG, and the DRBG, are provided in the Key Management Description and Entropy Description documents. 6.4.2 FPT_SKP_EXT.1, FCS_CKM.4 and FCS_CKM_EXT.4 60 All pre-shared keys, symmetric keys, and private keys are protected in storage and are not accessible to any user through TOE interfaces. A root encryption key is securely stored in IcKey (a Trusted Platform Module). No other plaintext keys are stored in non-volatile storage. The root encryption key is used to decrypt a key encryption key which is used to decrypt symmetric keys for encrypted storage and the Device Certificate. The IPsec PSK is stored in an encrypted partition of NVRAM. Key destruction is described in the Key Management Description. 61 The TOE destroys cryptographic keys and key materials when no longer needed. TLS and IPsec session keys are no longer needed at the end of a communication session. The REK, KEK, NVRAM Key, and DevCert Key are always needed and are never destroyed in the evaluated configuration. HDD encryption is always enabled in the evaluated configuration, so the HDD key is always needed. Cryptographic keys and key materials stored by the TOE can be destroyed by overwriting the key with the value of a new key; the HDD key can be logically deleted should HDD encryption be disabled. Key destruction is further described in the separate proprietary Key Management Document (KMD). 6.5 Stored Data Encryption 6.5.1 FCS_KYC_EXT.1, FPT_KYP_EXT.1, and FCS_COP.1(f) 62 The TOE encrypts data on the HDD and in NVRAM. The keychain for encrypting field-replaceable non-volatile storage devices begins with a common Root Encryption Key (REK). The plaintext REK is stored in a hardware security module, Ic Key. 63 The REK is used to encrypt and decrypt a Key Encryption Key (KEK). The KEK is used to encrypt and decrypt Device Encryption Keys (DEKs) for the HDD and NVRAM. All such operations use 256-bit AES keys to protect 256-bit AES data encryption on the target devices. Table 26: Keychain encryption Key En/decrypts Algorithm Length SFR Root Encryption Key (REK) Key Encryption Key AES CBC 256 FCS_COP.1(f) Key Encryption Key (KEK) HDD Key NVRAM Key DevCert Key AES CBC 256 FCS_COP.1(f) 64 Additional details about the keychain and device encryption are provided in the Key Management Description. RICOH Security Target Page 48 of 86 6.5.2 FDP_DSK_EXT.1 and FCS_COP.1(d) 65 Two field-replaceable non-volatile storage devices employ encryption: the HDD, and NVRAM. 66 All HDD data is encrypted with AES 256 CBC encryption by a hardware component, Ic Ctrl. HDD encryption is enabled and initialized in the evaluated configuration, as described in the guidance documentation. 67 Partition 3 of NVRAM is encrypted software component, LPUX NVRAM Encryption Driver, with AES 256 CBC encryption. NVRAM encryption is initialized during manufacturing and cannot be disabled. Other partitions of NVRAM do not contain confidential User or TSF Data. 68 Keychain, key management, and other details are provided in the Key Management Description. 6.6 Protection of the TSF 6.6.1 FPT_STM.1 69 The date (year/month/day) and time (hour/minute/second) the TOE records for the audit log are derived from the system clock of the TOE. The system clock is also used for other time-related functions, including user lockout timing, idle session timeouts, and SA lifetimes. 70 The system clock may be set locally or configured to use a network time server. Only an MFP Administrator can configure the system clock. 6.7 Trusted Communications 71 The Trusted Communications Function provides trusted paths for communications between the TOE and remote users / external IT entities. 6.7.1 FTP_TRP.1 (a), FTP_TRP.1 (b), FCS_HTTPS_EXT.1, FTP_ITC.1/TLS, and FCS_TLS_EXT.1 72 The TOE implements TLS 1.2 to protect communications between the TOE and remote users' client computers (print drivers, fax drivers, and WIM HTTPS sessions). TLS client authentication is not supported. The TOE can also be configured at initial configuration to use TLS to protect communications with a remote Syslog or SMTP server. 73 The TOE supports these ciphersuites: a) TLS_DHE_RSA_WITH_AES_128_CBC_ SHA256 b) TLS_DHE_RSA_WITH_AES_256_CBC_ SHA256 c) TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 d) TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 e) TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 f) TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 RICOH Security Target Page 49 of 86 6.7.2 FCS_COP.1 (a), FCS_COP.1(b), FCS_COP.1(c) , and FCS_COP.1(g) 74 The TOE generates a self-signed Device Certificate according to FCS_CKM.1(a). Administrators may import a Device Certificate that is generated outside of the TOE. 75 To establish a session key for TLS communications, the TOE employs a Diffie- Hellman-based key establishment scheme conforming to NIST SP 800-56A Section 5.6, and a Hash DRBG. The session key is used to encrypt communications with AES 128 or AES 256 CBC: Table 27: TLS/HTTPS Cryptographic Functions Function SFR Algorithm Key establishment FCS_CKM.1(a) FCS_COP.1(b) FCS_COP.1(c) DSA KeyGen 186-4 KAS-FFC KAS-ECC Message Authentication FCS_COP.1(g) HMAC-SHA-256 HMAC-SHA-384 HMAC-SHA-512 Random number generation FCS_RBG_EXT.1 Hash_DRBG_SHA256 Encryption / decryption FCS_COP.1(a) AES 128 CBC AES 256 CBC AES 128 GCM AES 256 GCM 6.7.3 FCS_ITC.1/IPsec, FCS_IPSEC_EXT.1, FIA_PSK_EXT.1, and FCS_COP.1(g) 76 The TOE employs IPsec to protect communications between the TOE and external IT entities in the operational environment. In the evaluated configuration, it is used for communications with LDAP, syslog, NTP, SMTP, and FTP servers. 77 IPsec is operated in transport mode, as set by the administrator. 78 IPsec supports automatic key exchange or automatic key exchange by IKEv1. 79 In Phase 1, peer authentication supports two types of authentication: pre-shared key authentication and digital certificate authentication. 80 The pre-shared key can be any length from 1 to 32 characters, and is composed of any combination of upper and lower case letters, numbers, and special characters (that include: “!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, and “)”). Text-based pre-shared keys of 22 characters is supported. The pre-shared key is configurable with an ASCII text string, and it is conditioned using a SHA-256 hash. 81 An administrator can select whether to use main mode or aggressive mode. In the evaluated configuration, only main mode is used. 82 In IKEv1, supported DH group is 14. The value set by the administrator is used. RICOH Security Target Page 50 of 86 83 IKEv1 key lifetimes can be set by the administrator, from 300 seconds to 172,800 seconds. In the evaluated configuration, Phase 1 key lifetime is set to 86,400 seconds (24 hours), and Phase 2 lifetime is set to 28,800 seconds (8 hours). 84 As an SPD, four individual entries and one default entry of Protect can be set by an administrator. Beginning with the first entry the packet is compared, and if it matches the entry, IPsec communication is performed. If the packet does not match the first entry, subsequent entries are tested until there is a match. If no entries match the packet, the default entry will be compared, and if it does not match, the packet is discarded. 85 The TOE supports these cryptographic algorithms: Table 28: IPsec Cryptographic Functions Function SFR Algorithm IKEv1 FCS_CKM.1(a) FCS_COP.1(a) FCS_COP.1(b) FCS_COP.1(g) FCS_RBG_EXT.1 RSA 186-4 AES 128 CBC AES 256 CBC HMAC-SHA-256 HMAC-SHA-384 HMAC-SHA-512 ESP FCS_COP.1(a) FCS_COP.1(b)[DIM] FCS_COP.1(g) FCS_RBG_EXT.1 AES 128 CBC AES 256 CBC HMAC-SHA-256 HMAC-SHA-384 HMAC-SHA-512 6.8 Administrative Roles 86 The Security Management Function consists of functions to 1) control operations for TSF data, 2) maintain user roles assigned to Normal Users, MFP Administrator, or MFP Supervisor to operate the Security Management Function, and 3) set appropriate default values to security attributes, all of which accord with user role privileges or user privileges that are assigned to Normal Users, MFP Administrator, or MFP Supervisor. 6.8.1 FMT_SMR.1 87 The TOE maintains U.NORMAL and U.ADMIN roles as described in Table 6. U.NORMAL defines the normal or non-admin users of the TOE which are permitted to use the document processing functions of the MFP and access their own data. U.ADMIN defines All TOE administrators w which includes the MFP Administrator and the MFP Supervisor. The MFP Administrator configures the TOE, manages normal users’ jobs and normal users’ data. The MFP supervisor sets MFP Administrators’ passwords. Administrators do not initiate document processing jobs. RICOH Security Target Page 51 of 86 6.8.2 FMT_SMF.1, FMT_MOF.1, and FMT_MTD.1 88 The TOE provides and restricts the following management functions which can be managed over the Operation Panel or the WIM: a) Manage user accounts including create, modify, delete users, user roles, privileges, available function lists. b) Manage the document user list for stored documents c) Manage the audit functions including enable/disable the audit functions and modifying the audit transfer settings d) Query, delete and export the audit logs e) Configure time and date settings f) Password Management including configuring password composition, password length, and password complexity g) Configure auto logout settings on WIM and the Operation Panel h) Configure Authentication Failure and Account lockout timer settings i) Modify PSTN Fax-Line Separation Stored Reception File User j) Configure Image Overwrite k) Configure network settings for trusted communications (specify IP addresses and port to connect to the TOE) l) Manage HDD cryptographic keys m) Manage device certificates including create, query, delete, modify, upload, download certificates n) Manage TOE trusted update o) Configure IPsec p) Configure SMTP over IPsec q) Configure NTP 89 The TOE restricts modification of TSF functions and TSF data to the authorized administrator roles. 6.8.3 FMT_MSA.1 and FMT_MSA.3 90 Table 18 and Table 19 list the access control rules enforced by the TOE when users access the document processing functions (print, scan, copy, fax) and individual user jobs. The default behaviour to access the document data is permissive for all authenticated normal users, except for the U.ADMIN user which cannot initiate document processing functions. The TOE maintains username and available function lists data for individual users, unauthenticated users sending document print of document fax to the TOE must be identified before the TOE processes the job. 6.9 Trusted Operation 91 The Software Verification Function is to verify the integrity of the executable codes of the MFP Control Software, FCU Control Software and Operation Panel Control Software, and confirm that these codes can be trusted. RICOH Security Target Page 52 of 86 6.9.1 FPT_TST_EXT.1, FCS_COP.1(b), FCS_COP.1(c)/L1, and FCS_COP.1(c)/L2 92 During start-up, the TOE performs a series of integrity tests, that check that the hash on the executable files is correct and that the software has not been changed. The integrity tests check the hash on the software executable listed below: Table 29: Start-up Integrity Tests Integrity test SFR Algorithm TPM FCS_COP.1(c)/L1 SHA-1 MFP Control Software FCS_COP.1(b) FCS_COP.1(c)/L2 RSA 186-4 SHA-256 Fax Control Unit FCS_COP.1(c)/L1 SHA-1 Operation Panel Software FCS_COP.1(b) FCS_COP.1(c)/L1 RSA 186-4 SHA-1 Operation Panel Applications FCS_COP.1(b) FCS_COP.1(c)/L1 RSA 186-4 SHA-1 93 If any steps of the integrity tests fail, a Service Call (SC) error code is displayed on the Operator Panel and the TOE becomes unavailable. In such cases, the Administrator must contact a Customer Engineer to service the TOE. 94 When all steps succeed, the TOE becomes operational. 95 Testing that the hash on the TOE software image is correct before the TOE can become operational verifies the integrity and validity of the TOE software; this is sufficient to demonstrate that the TSF is operating correctly. 6.9.2 FPT_TUD_EXT.1, FCS_COP.1(b), FCS_COP.1(c)/L1, and FCS_COP.1(c)/L2 96 TOE allows only the MFP Administrator to read the version of the MFP Control Software, Operation Panel Control Software, and FCU Control Software. The MFP Administrator can read these versions using the Operation Panel or WIM from the client computer. 97 The MFP Administrator can prepare for installation of updated MFP Control Software, Operation Panel Software, or FCU Control Software, by uploading an installation package from the client computer using WIM. The package contains the TOE Software and a digital signature (DS) that was created using the SERES private key. Digital signatures for trusted updates are generated outside of the TOE, by the manufacturer. 98 For MFP Control or FCU Software, the TOE performs the following verifications before the installing the package: a) Identifies the type of software (e.g., MFP Control, Operation Panel, FCU); b) Verifies that the software model name matches the TOE; c) Creates a SHA256 message digest (MD1) of the software, uses the SERES public key to decrypt DS (MD2), and then verifies that MD1 = MD2. RICOH Security Target Page 53 of 86 99 For Operation Panel software, the TOE performs the following verifications before the installing the package: a) Identifies the type of software (e.g., MFP Control, Operation Panel, FCU); b) Verifies that the software model name matches the TOE; c) Creates a SHA256 message digest (MD1) of the index file, uses the SERES public key to decrypt DS (MD2), and then verifies that MD1 = MD2. d) Creates a SHA256 message digest (MD3) of the software image, uses an internal key to decrypt DS (MD4), and then verifies that MD3 = MD4. 100 The TOE performs the signature verification of the software to be updated using the encryption functions listed below when updating the software. Table 30: Signature Verification Integrity test SFR Algorithm MFP Control Software FCS_COP.1(b) FCS_COP.1(c)/L2 RSA 186-4 SHA-256 Operation Panel Software FCS_COP.1(b) FCS_COP.1(c)/L2 ECDSA SigVer 186-4 SHA-256 Operation Panel Applications FCS_COP.1(b) FCS_COP.1(c)/L2 RSA 186-4 ECDSA SigVer 186-4 SHA-256 6.10 PSTN Fax-Network Separation 101 The Fax Line Separation Function permits only fax transmissions as input information from telephone lines so that unauthorized intrusion from telephone lines can be prevented. 6.10.1 FDP_FXS_EXT.1 102 The fax interface use cases are below. a) Sending faxes i) The TOE receives documents from client PCs via the LAN, and using the fax interface, transmits them as fax documents via the PSTN line using the ITU-T T.30 protocol. ii) The TOE can transmit stored documents as faxes. b) Receiving faxes i) A remote fax machine establishes a connection to the TOE through the PSTN line using the ITU-T T.30 protocol, through which the TOE receives fax documents. c) Fax-Line Separation i) The fax modem accepts connections through the PSTN only if they conform to the ITU-T T.30 protocol. RICOH Security Target Page 54 of 86 ii) Data that is transmitted or received through the PSTN is fax-format, image data. 103 Other than the specified use cases, the TOE allows no other data to be transmitted on the fax line. 6.11 Image Overwrite 6.11.1 FDP_RIP.1(a) 104 During the processing of jobs, image data is stored on the HDD. When such data is no longer needed by the user or the TOE, residual data can be overwritten using the Auto Erase Memory function. 105 When enabled, the Auto Erase Memory function automatically overwrites the residual image data after each completion of the following processing jobs: a) Copy jobs b) Print jobs c) Sample Print/Locked Print/Hold Print d) Stored Print jobs (after deletion of the job) e) Spool printing jobs f) LAN-Fax print data g) Faxes sent/received using remote machines h) Scanned files sent by e-mail i) Files sent by Scan to Folder j) Documents sent using Web Image Monitor k) Documents deleted from the Document Server using the Copier, Printer, Fax or Scanner functions 106 When the Auto Erase Memory function is enabled, such data is actively overwritten with values and repetition selected by the Administrator: a) NSA: Temporary data is overwritten twice with random numbers and once with zeros. b) DoD: Each item of data is overwritten by a random number, then by its complement, then by another random number, and is then verified. c) Random Numbers: Temporary data is overwritten multiple times with random numbers. The number of overwrites can be selected from 1 to 9, default 3. RICOH Security Target Page 55 of 86 7 Rationale 7.1 Conformance Claim Rationale 107 The following rationale is presented with regard to the PP conformance claims: a) TOE type. As identified in section 2.1, the TOE is hardcopy device, consistent with the HCDPP. b) Security problem definition. As shown in section 3, the threats, OSPs and assumptions are reproduced directly from the HCDPP. c) Security objectives. As shown in section 4, the security objectives are reproduced directly from the HCDPP. d) Security requirements. As shown in section 4, the security requirements are reproduced directly from the HCDPP. No additional requirements have been specified. 7.2 Security Objectives Rationale 108 The following table maps threats, OSPs, and assumptions, to their respective Security Objectives. Table 31: Security Objectives Rationale Threat/Policy/Assumptions Rationale T.UNAUTHORIZED_ACCESS An attacker may access (read, modify, or delete) User Document Data or change (modify or delete) User Job Data in the TOE through one of the TOE’s interfaces. O.ACCESS_CONTROL restricts access to User Data in the TOE to authorized Users. O.USER_I&A provides the basis for access control. O.ADMIN_ROLES restricts the ability to authorize Users and set access controls to authorized Administrators. T.TSF_COMPROMISE An attacker may gain Unauthorized Access to TSF Data in the TOE through one of the TOE’s interfaces. O.ACCESS_ CONTROL restricts access to TSF Data in the TOE to authorized Users. O.USER_I&A provides the basis for access control. O.ADMIN_ROLES restricts the ability to authorize Users and set access controls to authorized Administrators. T.TSF_FAILURE A malfunction of the TSF may cause loss of security if the TOE is permitted to operate. O.TSF_SELF_TEST prevents the TOE from operating if a malfunction is detected. T.UNAUTHORIZED_UPDATE An attacker may cause the installation of unauthorized software on the TOE. O.UPDATE_VERIFICATION verifies the authenticity of software updates. RICOH Security Target Page 56 of 86 Threat/Policy/Assumptions Rationale T.NET_COMPROMISE An attacker may access data in transit or otherwise compromise the security of the TOE by monitoring or manipulating network communication. O.COMMS_PROTECTION protects LAN communications from sniffing, replay, and man- in-the-middle attacks. P.AUTHORIZATION Users must be authorized before performing Document Processing and administrative functions. O.USER_AUTHORIZATION restricts the ability to perform Document Processing and administrative functions to authorized Users. O.USER_I&A provides the basis for authorization. O.ADMIN_ROLES restricts the ability to authorize Users to authorized Administrators. P.AUDIT Security-relevant activities must be audited and the log of such actions must be protected and transmitted to an External IT Entity. O.AUDIT requires the generation of audit data. O.ACCESS_CONTROL restricts access to audit data in the TOE to authorized Users. O.USER_AUTHORIZATION provides the basis for authorization. P.COMMS_PROTECTION The TOE must be able to identify itself to other devices on the LAN. O.COMMS_PROTECTION protects LAN communications from man-in-the-middle attacks. P.STORAGE_ENCRYPTION (conditionally mandatory) If the TOE stores User Document Data or Confidential TSF Data on Field-Replaceable Nonvolatile Storage Devices, it will encrypt such data on those devices. O.STORAGE_ENCRYPTION protects User Document Data and Confidential TSF Data stored in Field-Replaceable Nonvolatile Storage Devices from exposure if a device has been removed from the TOE and its Operational Environment. P.KEY_MATERIAL (conditionally mandatory) Cleartext keys, submasks, random numbers, or any other values that contribute to the creation of encryption keys for Field- Replaceable Nonvolatile Storage of User Document Data or Confidential TSF Data must be protected from unauthorized access and must not be stored on that storage device. O.KEY_MATERIAL protects keys and key materials from unauthorized access and ensures that they any key materials are not stored in cleartext on the device that uses those materials for its own encryption. P.FAX_FLOW (conditionally mandatory) If the TOE provides a PSTN fax function, it will ensure separation between the PSTN fax line and the LAN. O.FAX_NET_SEPARATION requires a separation between the PSTN fax line and the LAN. RICOH Security Target Page 57 of 86 Threat/Policy/Assumptions Rationale P.IMAGE_OVERWRITE (optional) Upon completion or cancellation of a Document Processing job, the TOE shall overwrite residual image data from its Field- Replaceable Nonvolatile Storage Device. O.IMAGE_OVERWRITE overwrites residual image data from Field-Replaceable Nonvolatile Storage Devices after Document Processing jobs are completed or cancelled. A.PHYSICAL Physical security, commensurate with the value of the TOE and the data it stores or processes, is assumed to be provided by the environment. OE.PHYSICAL_PROTECTION establishes a protected physical environment for the TOE. A.NETWORK The Operational Environment is assumed to protect the TOE from direct, public access to its LAN interface. OE.NETWORK_PROTECTION establishes a protected LAN environment for the TOE. A.TRUSTED_ADMIN TOE Administrators are trusted to administer the TOE according to site security policies. OE.ADMIN_TRUST establishes responsibility of the TOE Owner to have a trusted relationship with Administrators. Table 32: Security Objectives Rationale 7.3 Security Assurance Requirements rationale The rationale for choosing these security assurance requirements is that they define a minimum security baseline that is based on the anticipated threat level of the attacker, the security of the Operational Environment in which the TOE is deployed, and the relative value of the TOE itself. The assurance activities throughout the PP are used to provide tailored guidance on the specific expectations for completing the security assurance requirements. RICOH Security Target Page 58 of 86 Annex A: Extended Components Definition 109 This annex reproduces the HCDPP Appendix A.9 extended components definition. Security Audit (FAU) External Audit Trail Storage (FAU_STG_EXT) Family Behavior This family defines requirements for the TSF to ensure that secure transmission of audit data from TOE to an External IT Entity. Component levelling FAU_STG_EXT.1 External Audit Trail Storage requires the TSF to use a trusted channel implementing a secure protocol. Management: The following actions could be considered for the management functions in FMT: a) The TSF shall have the ability to configure the cryptographic functionality. Audit: The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. FAU_STG_EXT.1 Extended: Protected Audit Trail Storage Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation FTP_ITC.1 Inter-TSF Trusted Channel FAU_STG_EXT.1.1 The TSF shall be able to transmit the generated audit data to an external IT entity using a trusted channel according to FTP_ITC. Rationale: The TSF is required that the transmission of generated audit data to an External IT Entity which relies on a non-TOE audit server for storage and review of audit records. The storage of these audit records and the ability to allow the administrator to review these audit records is provided by the Operational Environment in that case. The Common Criteria does not provide a suitable SFR for the transmission of audit data to an External IT Entity. RICOH Security Target Page 59 of 86 This extended component protects the audit records, and it is therefore placed in the FAU class with a single component. Cryptographic Support (FCS) Cryptographic Key Management (FCS_CKM_EXT) Family Behavior This family addresses the management aspects of cryptographic keys. Especially, this extended component is intended for cryptographic key destruction. Component levelling FCS_CKM_EXT.4 Cryptographic Key Material Destruction ensures not only keys but also key materials that are no longer needed are destroyed by using an approved method. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen Audit: The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction Hierarchical to: No other components Dependencies: [FCS_CKM.1(a) Cryptographic Key Generation (for asymmetric keys), or FCS_CKM.1(b) Cryptographic key generation (Symmetric Keys)], FCS_CKM.4 Cryptographic key destruction FCS_CKM_EXT.4.1 The TSF shall destroy all plaintext secret and private cryptographic keys and cryptographic critical security parameters when no longer needed. Rationale: Cryptographic Key Material Destruction is to ensure the keys and key materials that are no longer needed are destroyed by using an approved method, and the Common Criteria does not provide a suitable SFR for the Cryptographic Key Material Destruction. RICOH Security Target Page 60 of 86 This extended component protects the cryptographic key and key materials against exposure, and it is therefore placed in the FCS class with a single component. HTTPS selected (FCS_HTTPS_EXT) Family Behavior Components in this family define the requirements for protecting remote management sessions between the TOE and a Security Administrator. This family describes how HTTPS will be implemented. This is a new family defined for the FCS Class. Component levelling FCS_HTTPS_EXT.1 HTTPS selected, requires that HTTPS be implemented according to RFC 2818 and supports TLS. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) Failure of HTTPS session establishment. FCS_HTTPS_EXT.1 Extended: HTTPS selected Hierarchical to: No other components. Dependencies: No dependencies. FCS_HTTPS_EXT.1.1 The TSF shall implement the HTTPS protocol that complies with RFC 2818. FCS_HTTPS_EXT.1.2 The TSF shall implement the HTTPS protocol using TLS as specified in FCS_TLS_EXT.1. Rationale: HTTPS is one of the secure communication protocols, and the Common Criteria does not provide a suitable SFR for the communication protocols using cryptographic algorithms. This extended component protects the communication data using cryptographic algorithms, and it is therefore placed in the FCS class with a single component. IPsec selected (FCS_IPSEC_EXT) Family Behavior RICOH Security Target Page 61 of 86 This family addresses the requirements for protecting communications using IPsec. Component levelling FCS_IPSEC_EXT.1 IPsec requires that IPsec be implemented as specified. Management: The following actions could be considered for the management functions in FMT: a) There are no management actions foreseen. Audit: The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: b) Failure to establish an IPsec SA. FCS_IPSEC_EXT.1 Extended: IPsec selected Hierarchical to: No other components Dependencies: FIA_PSK_EXT.1 Extended: Pre-Shared Key Composition FCS_COP.1(g) Cryptographic Operation (for keyed-hash message authentication) FCS_IPSEC_EXT.1.1 The TSF shall implement the IPsec architecture as specified in RFC 4301. FCS_IPSEC_EXT.1.2 The TSF shall implement [selection: tunnel mode, transport mode]. FCS_IPSEC_EXT.1.3 The TSF shall have a nominal, final entry in the SPD that matches anything that is otherwise unmatched and discards it. FCS_IPSEC_EXT.1.4 The TSF shall implement the IPsec protocol ESP as defined by RFC 4303 using [selection: the cryptographic algorithms AES-CBC-128 (as specified by RFC 3602) together with a Secure Hash Algorithm (SHA)- based HMAC, AES-CBC256 (as specified by RFC 3602) together with a Secure Hash Algorithm (SHA)-based HMAC, AES-GCM-128 as specified in RFC 4106, AES-GCM-256 as specified in RFC 4106]. FCS_IPSEC_EXT.1.5 The TSF shall implement the protocol: [selection: IKEv1 as defined in RFCs 2407, 2408, 2409, RFC 4109, [selection: no other RFCs for extended sequence numbers, RFC 4304 for extended sequence numbers], and [selection: no other RFCs for hash functions, RFC 4868 for hash functions]; IKEv2 as defined in RFCs 5996 (with mandatory support for NAT traversal as specified in section 2.23), 4307, and [selection: no other RFCs for hash functions, RFC 4868 for hash functions]]. RICOH Security Target Page 62 of 86 FCS_IPSEC_EXT.1.6 The TSF shall ensure the encrypted payload in the [selection: IKEv1, IKEv2] protocol uses the cryptographic algorithms [selection: AES-CBC- 128, AES_CBC-192 AES-CBC-256 as specified in RFC 3602, AES- GCM-128, AES-GCM-192, AES-GCM-256 as specified in RFC 5282, no other algorithm]. FCS_IPSEC_EXT.1.7 The TSF shall ensure that IKEv1 Phase 1 exchanges use only main mode. FCS_IPSEC_EXT.1.8 The TSF shall ensure that [selection: IKEv2 SA lifetimes can be established based on [selection: number of packets/number of bytes; length of time, where the time values can be limited to: 24 hours for Phase 1 SAs and 8 hours for Phase 2 SAs]; IKEv1 SA lifetimes can be established based on [selection: number of packets/number of bytes ; length of time, where the time values can be limited to: 24 hours for Phase 1 SAs and 8 hours for Phase 2 SAs]] FCS_IPSEC_EXT.1.9 The TSF shall ensure that all IKE protocols implement DH Groups 14 (2048-bit MODP), and [selection: 24 (2048-bit MODP with 256-bit POS), 19 (256-bit Random ECP), 20 (384-bit Random ECP, 5 (1536-bit MODP)), [assignment: other DH groups that are implemented by the TOE], no other DH groups]. FCS_IPSEC_EXT.1.10 The TSF shall ensure that all IKE protocols perform Peer Authentication using the [selection: RSA, ECDSA] algorithm and Pre-shared Keys. Rationale: IPsec is one of the secure communication protocols, and the Common Criteria does not provide a suitable SFR for the communication protocols using cryptographic algorithms. This extended component protects the communication data using cryptographic algorithms, and it is therefore placed in the FCS class with a single component.FCS_IPSEC_EXT.1.11 The TSF shall ensure that IKE protocols implement DH Group(s) [selection: 14 (2048-bit MODP), 19 (256-bit Random ECP), 20 (384-bit Random ECP), 24 (2048-bit MODP with 256-bit POS)]. Cryptographic Key Derivation (FCS_KDF_EXT) Family Behavior This family specifies the means by which an intermediate key is derived from a specified set of submasks. Component levelling FCS_KDF_EXT.1 Cryptographic Key Derivation requires the TSF to derive intermediate keys from submasks using the specified hash functions. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen RICOH Security Target Page 63 of 86 Audit: The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen FCS_KDF_EXT.1 Extended: Cryptographic Key Derivation Hierarchical to: No other components Dependencies: FCS_COP.1(h) Cryptographic Operation (for keyed-hash message authentication), [if selected: FCS_RBG_EXT.1 Extended: Cryptographic Operation (Random Bit Generation)] FCS_KDF_EXT.1.1 The TSF shall accept [selection: a RNG generated submask as specified in FCS_RBG_EXT.1, a conditioned password submask, imported submask] to derive an intermediate key, as defined in [selection: NIST SP 800-108 [selection: KDF in Counter Mode, KDF in Feedback Mode, KDF in Double-Pipeline Iteration Mode], NIST SP 800-132], using the keyed-hash functions specified in FCS_COP.1(h), such that the output is at least of equivalent security strength (in number of bits) to the BEV. Cryptographic Operation (FCS_KYC_EXT) FCS_KYC_EXT Cryptographic Operation (Key Chaining) Family Behavior This family provides the specification to be used for using multiple layers of encryption keys to ultimately secure the protected data encrypted on the storage. Component levelling FCS_KYC_EXT Key Chaining, requires the TSF to maintain a key chain and specifies the characteristics of that chain. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen Audit: The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. RICOH Security Target Page 64 of 86 FCS_KYC_EXT.1 Extended: Key Chaining Hierarchical to: No other components Dependencies: [FCS_COP.1(e) Cryptographic operation (Key Wrapping), FCS_SMC_EXT.1 Extended: Submask Combining, FCS_COP.1(i) Cryptographic operation (Key Transport), FCS_KDF_EXT.1 Cryptographic Operation (Key Derivation), and/or FCS_COP.1(f) Cryptographic operation (Key Encryption)]. FCS_KYC_EXT.1.1 The TSF shall maintain a key chain of: [selection: one, using a submask as the BEVor DEK; intermediate keys originating from one or more submask(s) to the BEV or DEK using the following method(s): [selection: key wrapping as specified in FCS_COP.1(e), key combining as specified in FCS_SMC_EXT.1, key encryption as specified in FCS_COP.1(f), key derivation as specified in FCS_KDF_EXT.1, key transport as specified in FCS_COP.1(i)]] while maintaining an effective strength of [selection: 128 bits, 256 bits]. Rationale: Key Chaining ensures that the TSF maintains the key chain, and also specifies the characteristics of that chain. However, the Common Criteria does not provide a suitable SFR for the management of multiple layers of encryption key to protect encrypted data. This extended component protects the TSF data using cryptographic algorithms, and it is therefore placed in the FCS class with a single component. Cryptographic Password Construction and Conditioning (FCS_PCC_EXT) Family Behavior This family ensures that passwords used to produce the BEV are robust (in terms of their composition) and are conditioned to provide an appropriate-length bit string. Component levelling FCS_PCC_EXT.1 Cryptographic Password Construction and Conditioning, requires the TSF to accept passwords of a certain composition and condition them appropriately. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen Audit: The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. RICOH Security Target Page 65 of 86 FCS_PCC_EXT.1 Extended: Cryptographic Password Construction and Conditioning Hierarchical to: No other components Dependencies: FCS_COP.1(h) Cryptographic Operation (for keyed-hash message authentication) FCS_PCC_EXT.1.1 A password used to generate a password authorization factor shall enable up to [assignment: positive integer of 64 or more] characters in the set of {upper case characters, lower case characters, numbers, and [assignment: other supported special characters]} and shall perform Password-based Key Derivation Functions in accordance with a specified cryptographic algorithm [HMAC-[selection: SHA-256, SHA384, SHA-512]], with [assignment: positive integer of 1000 or more] iterations, and output cryptographic key sizes [selection: 128, 256] that meet the following: [assignment: PBKDF recommendation or specification]. Random Bit Generation (FCS_RBG_EXT) FCS_RBG_EXT.1 Cryptographic Operation (Random Bit Generation) Family Behavior This family defines requirements for random bit generation to ensure that it is performed in accordance with selected standards and seeded by an entropy source. Component levelling FCS_RBG_EXT.1 Random Bit Generation requires random bit generation to be performed in accordance with selected standards and seeded by an entropy source. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen Audit: The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen FCS_RBG_EXT.1 Extended: Random Bit Generation Hierarchical to: No other components RICOH Security Target Page 66 of 86 Dependencies: No dependencies FCS_RBG_EXT.1.1 The TSF shall perform all deterministic random bit generation services in accordance with ISO/IEC 18031:2011, NIST SP 800-90A using [selection: Hash_DRBG (any), HMAC_DRBG (any), CTR_DRBG (AES)]. FCS_RBG_EXT.1.2 The deterministic RBG shall be seeded by an entropy source that accumulates entropy from [selection: [assignment: number of software- based sources] software-based noise source(s), [assignment: number of hardware-based sources] hardware-based noise source(s)] with a minimum of [selection: 128 bits, 256 bits] of entropy at least equal to the greatest security strength, according to ISO/IEC 18031:2011 Table C.1 “Security Strength Table for Hash Functions”, of the keys and hashes that it will generate. Rationale: Random bits/number will be used by the SFRs for key generation and destruction, and the Common Criteria does not provide a suitable SFR for the random bit generation. This extended component ensures the strength of encryption keys, and it is therefore placed in the FCS class with a single component. Submask Combining (FCS_SMC_EXT) Family Behavior This family defines the means by which submasks are combined, if the TOE supports more than one submask being used to derive or protect the BEV. Component levelling FCS_SMC_EXT.1 Submask combining requires the TSF to combine the submasks in a predictable fashion Management: The following actions could be considered for the management functions in FMT: a) There are no management actions foreseen. Audit: The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. FCS_SMC_EXT.1 Extended: Submask Combining Hierarchical to: No other components Dependencies: FCS_COP.1(c) Cryptographic operation (Hash Algorithm) RICOH Security Target Page 67 of 86 FCS_SMC_EXT.1.1 The TSF shall combine submasks using the following method [selection: exclusive OR (XOR), SHA-256, SHA-512] to generate an intermediary key or BEV. Rationale: Submask Combining is to ensure the TSF combine the submasks in order to derive or protect the BEV. This extended component protects the TSF data using cryptographic algorithms, and it is therefore placed in the FCS class with a single component. Salt, Nonce, and Initialization Vector Generation (FCS_SNI_EXT) Family Behavior This family ensures that salts, nonces, and IVs are well formed. Component levelling FCS_SNI_EXT.1 Cryptographic Operation (Salt, Nonce, and Initialization Vector Generation), requires the generation of salts, nonces, and IVs to be used by the cryptographic components of the TOE to be performed in the specified manner. Management: The following actions could be considered for the management functions in FMT: a) No specific management functions are identified Audit: The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. FCS_SNI_EXT.1 Extended: Cryptographic Operation (Salt, Nonce, and Initialization Vector Generation) Hierarchical to: No other components Dependencies: FCS_RBG_EXT.1 Extended: Cryptographic Operation (Random Bit Generation) FCS_SNI_EXT.1.1 The TSF shall only use salts that are generated by a RNG as specified in FCS_RBG_EXT.1. FCS_SNI_EXT.1.2 The TSF shall only use unique nonces with a minimum size of [64] bits. FCS_SNI_EXT.1.3 The TSF shall create IVs in the following manner: [ CBC: IVs shall be non-repeating, CCM: Nonce shall be non-repeating, XTS: No IV. Tweak RICOH Security Target Page 68 of 86 values shall be non-negative integers, assigned consecutively, and starting at an arbitrary non-negative integer, GCM: IV shall be non- repeating. The number of invocations of GCM shall not exceed 2^32 for a given secret key.]. SSH selected (FCS_SSH_EXT) Family Behavior The component in this family addresses the ability for a server to offer SSH to protect data between a client and the server using the SSH protocol. Component levelling FCS_SSH_EXT.1 SSH selected, requires the SSH protocol implemented as specified. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) Failure of SSH session establishment FCS_SSH_EXT.1 Extended: SSH selected Hierarchical to: No other components Dependencies: No dependencies FCS_SSH_EXT.1.1 The TSF shall implement the SSH protocol that complies with RFC(s) [selection: 4251, 4252, 4253, 4254, and [selection: 5656, 6668, no other RFCs]. FCS_SSH_EXT.1.2 The TSF shall ensure that the SSH protocol implementation supports the following authentication methods as described in RFC 4252: public key- based, password-based. FCS_SSH_EXT.1.3 The TSF shall ensure that, as described in RFC 4253, packets greater than [assignment: number of bytes] bytes in an SSH transport connection are dropped. FCS_SSH_EXT.1.4 The TSF shall ensure that the SSH transport implementation uses the following encryption algorithms and rejects all other encryption RICOH Security Target Page 69 of 86 algorithms: [assignment: AES-CBC-128, AES-CBC-256, [selection: AEAD_AES_128_GCM, AEAD_AES_256_GCM, no other algorithms].]. FCS_SSH_EXT.1.5 The TSF shall ensure that the SSH transport implementation uses [selection: SSH_RSA, ecdsa-sha2-nistp256] and [selection: PGP-SIGN- RSA, PGP-SIGNDSS, ecdsa-sha2-nistp384, no other public key algorithms,] as its public key algorithm(s). FCS_SSH_EXT.1.6 6 The TSF shall ensure that data integrity algorithms used in SSH transport connection is [selection: HMAC-SHA1, HMAC-SHA1-96, HMAC-SHA2-256, HMAC-SHA2-512]. FCS_SSH_EXT.1.7 The TSF shall ensure that [selection: diffie-hellman-group14-sha1, diffie- hellman-group15-sha512, ecdh-sha2-nistp256] and [selection: diffie- hellman-group14-sha256, diffie-hellman-group16-sha512, ecdh-sha2- nistp384, ecdh-sha2-nistp521, no other methods] are the only allowed key exchange methods used for the SSH protocol. Rationale: SSH is one of the secure communication protocols, and the Common Criteria does not provide a suitable SFR for the communication protocols using cryptographic algorithms. This extended component protects the communication data using cryptographic algorithms, and it is therefore placed in the FCS class with a single component. TLS selected (FCS_TLS_EXT) Family Behavior This family addresses the ability for a server and/or a client to use TLS to protect data between a client and the server using the TLS protocol. Component levelling FCS_TLS_EXT.1 TLS selected, requires the TLS protocol implemented as specified. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) Failure of TLS session establishment FCS_TLS_EXT.1 Extended: TLS selected RICOH Security Target Page 70 of 86 Hierarchical to: No other components Dependencies: No dependencies FCS_TLS_EXT.1.1 The TSF shall implement one or more of the following protocols [selection: TLS 1.0 (RFC 2246), TLS 1.1 (RFC 4346), TLS 1.2 (RFC 5246)] supporting the following ciphersuites: Mandatory ciphersuites: • TLS_RSA_WITH_AES_128_CBC_SHA Optional ciphersuites: [selection: • None • TLS_RSA_WITH_AES_256_CBC_SHA • TLS_DHE_RSA_WITH_AES_128_CBC_SHA • TLS_DHE_RSA_WITH_AES_256_CBC_SHA • TLS_RSA_WITH_AES_128_CBC_SHA256 • TLS_RSA_WITH_AES_256_CBC_ SHA256 • TLS_DHE_RSA_WITH_AES_128_CBC_ SHA256 • TLS_DHE_RSA_WITH_AES_256_CBC_ SHA256 • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 • TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 • TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 • TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 • TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 • TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 • TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384]. Rationale: TLS is one of the secure communication protocols, and the Common Criteria does not provide a suitable SFR for the communication protocols using cryptographic algorithms. This extended component protects the communication data using cryptographic algorithms, and it is therefore placed in the FCS class with a single component. RICOH Security Target Page 71 of 86 User Data Protection (FDP) Protection of Data on Disk (FDP_DSK_EXT) Family Behavior This family is to mandate the encryption of all protected data written to the storage. Component levelling FDP_DSK_EXT.1 Extended: Protection of Data on Disk, requires the TSF to encrypt all the Confidential TSF and User Data stored on the Field-Replaceable Non-volatile Storage Devices in order to avoid storing these data in plaintext on the devices. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. FCS_DSK_EXT.1 Extended: Protection of Data on Disk Hierarchical to: No other components Dependencies: FCS_COP.1(d) Cryptographic operation (AES Data Encryption/Decryption) FDP_DSK_EXT.1.1 The TSF shall [selection: perform encryption in accordance with FCS_COP.1(d), use a self-encrypting Field-Replaceable Nonvolatile Storage Device that is separately CC certified to conform to the FDE EE cPP] such that any Field-Replaceable Nonvolatile Storage Device contains no plaintext User Document Data and no plaintext confidential TSF Data. FDP_DSK_EXT.1.2 The TSF shall encrypt all protected data without user intervention. Rationale: Extended: Protection of Data on Disk is to specify that encryption of any confidential data without user intervention, and the Common Criteria does not provide a suitable SFR for the Protection of Data on Disk. This extended component protects the Data on Disk, and it is therefore placed in the FDP class with a single component. RICOH Security Target Page 72 of 86 Fax Separation (FDP_FXS_EXT) Family Behavior This family addresses the requirements for separation between Fax PSTN line and the LAN to which TOE is connected. Component levelling FDP_FXS_EXT.1 Fax Separation, requires the fax interface cannot be used to create a network bridge between a PSTN and a LAN to which TOE is connected. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. FCS_FXS_EXT.1 Extended: Fax separation Hierarchical to: No other components Dependencies: No dependencies FDP_FXS_EXT.1.1 The TSF shall prohibit communication via the fax interface, except transmitting or receiving User Data using fax protocols. Rationale: Fax Separation is to protect a LAN against attack from PSTN line, and the Common Criteria does not provide a suitable SFR for the Protection of TSF or User Data. This extended component protects the TSF Data or User Data, and it is therefore placed in the FDP class with a single component. Identification and Authentication (FIA) Password Management (FIA_PMG_EXT) Family Behavior This family defines requirements for the attributes of passwords used by administrative users to ensure that strong passwords and passphrases can be chosen and maintained. RICOH Security Target Page 73 of 86 Component levelling FIA_PMG_EXT.1 Password management requires the TSF to support passwords with varying composition requirements, minimum lengths, maximum lifetime, and similarity constraints. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. FIA_PMG_EXT.1 Extended: Password Management Hierarchical to: No other components. Dependencies: No dependencies. FIA_PMG_EXT.1.1 The TSF shall provide the following password management capabilities for administrative passwords: c) Passwords shall be able to be composed of any combination of upper and lower case letters, numbers, and the following special characters: [selection: “!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, “)”, [assignment: other characters]]; d) Minimum password length shall be settable by an Administrator and have the capability to require passwords of 15 characters or greater. Rationale: Password Management is to ensure the strong authentication between the endpoints of communication, and the Common Criteria does not provide a suitable SFR for the Password Management. This extended component protects the TOE by means of password management, and it is therefore placed in the FIA class with a single component. Pre-Shared Key Composition (FIA_PSK_EXT) Family Behavior This family defines requirements for the TSF to ensure the ability to use pre-shared keys for IPsec. Component levelling RICOH Security Target Page 74 of 86 FIA_PSK_EXT.1 Pre-Shared Key Composition, ensures authenticity and access control for updates. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. FIA_PSK_EXT.1 Extended: Pre-Shared Key Composition Hierarchical to: No other components. Dependencies: FCS_RBG_EXT.1 Extended: Cryptographic Operation (Random Bit Generation). FIA_PSK_EXT.1.1 The TSF shall be able to use pre-shared keys for IPsec. FIA_PSK_EXT.1.2 The TSF shall be able to accept text-based pre-shared keys that are: • 22 characters in length and [selection: [assignment: other supported lengths], no other lengths]; • composed of any combination of upper and lower case letters, numbers, and special characters (that include: “!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, and “)” ). FIA_PSK_EXT.1.3 The TSF shall condition the text-based pre-shared keys by using [selection: SHA-1, SHA-256, SHA-512, [assignment: method of conditioning text string]] and be able to [selection: use no other pre- shared keys; accept bit-based pre-shared keys; generate bit-based pre- shared keys using the random bit generator specified in FCS_RBG_EXT.1]. Rationale: Pre-shared Key Composition is to ensure the strong authentication between the endpoints of communications, and the Common Criteria does not provide a suitable SFR for the Pre-shared Key Composition. This extended component protects the TOE by means of strong authentication, and it is therefore placed in the FIA class with a single component. RICOH Security Target Page 75 of 86 Protection of the TSF (FPT) Protection of Key and Key Material (FPT_KYP_EXT) Family Behavior This family addresses the requirements for keys and key materials to be protected if and when written to nonvolatile storage. Component levelling FPT_KYP_EXT.1 Extended: Protection of key and key material, requires the TSF to ensure that no plaintext key or key materials are written to nonvolatile storage. Management: FPT_SKP_EXT.1 The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: FPT_SKP_EXT.1 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. FPT_KYP_EXT.1 Extended: Protection of Key and Key Material Hierarchical to: No other components. Dependencies: No dependencies. FPT_KYP_EXT.1.1 The TSF shall not store plaintext keys that are part of the keychain specified by FCS_KYC_EXT.1 in any Field-Replaceable Nonvolatile Storage Device, and not store any such plaintext key on a device that uses the key for its encryption. Rationale: Protection of Key and Key Material is to ensure that no plaintext key or key material are written to non-volatile storage, and the Common Criteria does not provide a suitable SFR for the protection of key and key material. This extended component protects the TSF data, and it is therefore placed in the FPT class with a single component. Protection of TSF Data (FPT_SKP_EXT) Family Behavior RICOH Security Target Page 76 of 86 This family addresses the requirements for managing and protecting the TSF data, such as cryptographic keys. This is a new family modelled as the FPT Class. Component levelling FPT_SKP_EXT.1 Protection of TSF Data (for reading all symmetric keys), requires preventing symmetric keys from being read by any user or subject. It is the only component of this family. Management: The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. FPT_SKP_EXT.1 Protection of TSF Data Hierarchical to: No other components. Dependencies: No other components. FPT_SKP_EXT.1.1 The TSF shall prevent reading of all pre-shared keys, symmetric keys, and private keys. Rationale: Protection of TSF Data is to ensure the pre-shared keys, symmetric keys and private keys are protected securely, and the Common Criteria does not provide a suitable SFR for the protection of such TSF data. This extended component protects the TOE by means of strong authentication using Preshared Key, and it is therefore placed in the FPT class with a single component. TSF Self-Test (FPT_TST_EXT) FPT_TST_EXT.1 TSF Testing Family Behavior TSF testing requires a suite of self-testing to be run during initial start-up in order to demonstrate correct operation of the TSF. Component levelling RICOH Security Target Page 77 of 86 FPT_TST_EXT.1 TSF Self-Test requires a suite of self-tests to be run during initial start-up in order to demonstrate correct operation of the TSF. Management: The following actions could be considered for the management functions in FMT: a) No management functions. Audit: The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. FPT_TST_EXT.1 Extended: TSF testing Hierarchical to: No other components. Dependencies: No other components. FPT_TST_EXT.1.1 The TSF shall run a suite of self-tests during initial start-up (and power on) to demonstrate the correct operation of the TSF. Rationale: TSF testing is to ensure the TSF can be operated correctly, and the Common Criteria does not provide a suitable SFR for the TSF testing. In particular, there is no SFR defined for TSF testing. This extended component protects the TOE, and it is therefore placed in the FPT class with a single component. Trusted Update (FPT_TUD_EXT) Family Behavior This family defines requirements for the TSF to ensure that only administrators can update the TOE firmware and/or software. Component levelling FPT_TUD_EXT.1 Trusted Update, ensures authenticity and access control for updates. Management: The following actions could be considered for the management functions in FMT: a) There are no management actions foreseen RICOH Security Target Page 78 of 86 Audit: The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen FPT_TUD_EXT.1 Extended: Trusted Update Hierarchical to: No other components Dependencies: [FCS_COP.1(b) Cryptographic Operation (for signature generation/verification), or FCS_COP.1(c) Cryptographic operation (Hash Algorithm)]. FPT_TUD_EXT.1.1 The TSF shall provide authorized administrators the ability to query the current version of the TOE firmware/software FPT_TUD_EXT.1.2 The TSF shall provide authorized administrators the ability to initiate updates to TOE firmware/software. FPT_TUD_EXT.1.3 The TSF shall provide means to authenticate firmware/software updates to the TOE using a [selection: digital signature mechanism, published hash] prior to installing those updates. Rationale: Firmware/software is a form of TSF Data, and the Common Criteria does not provide a suitable SFR for the management of firmware/software. In particular, there is no SFR defined for importing TSF Data. This extended component protects the TOE, and it is therefore placed in the FPT class with a single component. RICOH Security Target Page 79 of 86 Annex B: Security Assurance Requirements This section describes Security Assurance Requirements (SARs) in the evaluations performed by the evaluator based on the CC. These are all common to the Security Functional Requirements (SFRs) in Section 5. Assurance activities to the individual SFRs are described in their respective sections. After the ST has been approved for evaluation, the Common Criteria IT Security Evaluation Facilities (ITSEF) will obtain the TOE, necessary IT environment, and the TOE guidance documents. The assurance activities described in the ST (which will be refined by the ITSEF to be TOE-specific, either within the ST or in a separate document) will be performed by the ITSEF. Although these activities were performed under the control of the ITSEF, it is allowed to obtain supports from the developer as well. The results of these activities will be documented and presented (along with the administrative guidance used) for validation. For each assurance family, “Developer Notes” are provided on the developer action elements to clarify what, if any, additional documentation/activity needs to be provided by the developer. The TOE security assurance requirements specified in Table 22 provides evaluative activities required to address the threats identified in Section 0 of this PP. Class ASE: Security Target evaluation The ST is evaluated as per ASE activities defined in the CEM. In addition, there may be Assurance Activities specified within the PP that call necessary descriptions to be included in the TSS that are specific to the TOE technology type. Appendix E of HCD PP v1.0 provides a description of the information expected to be provided regarding the quality of entropy in the random bit generator. Given the criticality of the key management scheme, this PP requires the developer to provide a detailed description of their key management implementation. This information can be submitted as an appendix to the ST and marked proprietary, as this level of detailed information is not expected to be made publicly available. See Appendix F of HCD PP v1.0 for details on the expectation of the developer’s Key Management Description. Class ADV: Development For TOEs conforming to this PP, the information about the TOE is contained in the guidance documentation available to the end user as well as the TOE Summary Specification (TSS) portion of the ST. While it is not required that the TOE developer write the TSS, the TOE developer must concur with the description of the product that is contained in the TSS as it relates to the functional requirements. The Assurance Activities contained in Section 5 should provide the ST authors with sufficient information to determine the appropriate content for the TSS section. ADV_FSP.1 Basic functional specification The functional specification describes the TSF Interfaces (TSFIs). At the level of assurance provided by this PP, it is not necessary to have a formal or complete specification of these interfaces. Additionally, because TOEs conforming to this PP will necessarily have interfaces to the Operational Environment that are not directly invokable by TOE users (to include administrative users), at this assurance level there is little point specifying that such interfaces be described in and of themselves since only indirect testing of such interfaces may be possible. The activities for this family for this PP should focus on understanding the interfaces presented in the TSS in response to the functional requirements, and the interfaces presented in the AGD documentation. No additional “functional specification” document should be necessary to satisfy RICOH Security Target Page 80 of 86 the assurance activities specified. The interfaces that need to be evaluated are characterized through the information needed to perform the assurance activities listed, rather than as an independent, abstract list. Developer action elements: ADV_FSP.1.1D The developer shall provide a functional specification. ADV_FSP.1.2D The developer shall provide a tracing from the functional specification to the SFRs. Developer Note: The developer shall provide appropriate TSS description and guidance documents as the functional specification. The TSS description identifies TSFIs associated with each SFR in order to confirm the validity of interface design. The developer is required to provide a description at least at a confirmable level in which TSS description and contents of guidance documents are consistent with each other. In case of insufficient information for evaluation in TSS description and contents of guidance documents, additional documentation can be requested. For the SFRs that cannot be directly operated/confirmed from external interfaces, the developer may be requested to provide additional information. Content and presentation elements: ADV_FSP.1.1C The functional specification shall describe the purpose and method of use for each SFR-enforcing and SFR-supporting TSFI. ADV_FSP.1.2C The functional specification shall identify all parameters associated with each SFR-enforcing and SFR-supporting TSFI. ADV_FSP.1.3C The functional specification shall provide rationale for the implicit categorization of interfaces as SFR-non-interfering. ADV_FSP.1.4C The tracing shall demonstrate that the SFRs trace to TSFIs in the functional specification. Evaluator action elements: ADV_FSP.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ADV_FSP.1.2E The evaluator shall determine that the functional specification is an accurate and complete instantiation of the SFRs. Assurance activity: TSS: The evaluator shall confirm identifiable external interfaces from guidance documents and examine that TSS description identifies all the interfaces required for realizing SFR. The evaluator shall confirm identification information of the TSFI associated with the SFR described in the TSS and confirm the consistency with the description related to each interface. RICOH Security Target Page 81 of 86 The evaluator shall check to ensure that the SFR defined in the ST is appropriately realized, based on identification information of the TSFI in the TSS description as well as on the information of purposes, methods of use, and parameters for each TSFI in the guidance documents The assurance activities specific to each SFR are described in Section 5 and the evaluator shall perform evaluations by adding to this assurance component. Class AGD: Guidance Documents The guidance documents will be provided with the developer’s security target. Guidance must include a description of how the administrator verifies that the Operational Environment can fulfill its role for the security functionality. The documentation should be in an informal style and readable by an administrator. Guidance must be provided for every Operational Environment that the product supports as claimed in the ST. This guidance includes • instructions to successfully install the TOE in that environment; and • instructions to manage the security of the TOE as a product and as a component of the larger Operational environment. Guidance pertaining to particular security functionality is also provided; requirements on such guidance are contained in the assurance activities specified in Section 5. AGD_OPE.1 Operational user guidance Developer action elements: AGD_OPE.1.1D The developer shall provide operational user guidance. Developer Note: The developer should review the assurance activities for this component to ascertain the specifics of the guidance that the evaluators will be checking for. This will provide the necessary information for the preparation of acceptable guidance. Content and presentation elements: AGD_OPE.1.1C The operational user guidance shall describe, for each user role, the ser- accessible functions and privileges that should be controlled in a secure processing environment, including appropriate warnings. AGD_OPE.1.2C The operational user guidance shall describe, for each user role, how to use the available interfaces provided by the TOE in a secure manner. AGD_OPE.1.3C The operational user guidance shall describe, for each user role, the available functions and interfaces, in particular all security parameters under the control of the user, indicating secure values as appropriate. AGD_OPE.1.4C The operational user guidance shall, for each user role, clearly present each type of security-relevant event relative to the user-accessible functions that need to be performed, including changing the security characteristics of entities under the control of the TSF. AGD_OPE.1.5C The operational user guidance shall identify all possible modes of operation of the TOE (including operation following failure or operational RICOH Security Target Page 82 of 86 error), their consequences, and implications for maintaining secure operation. AGD_OPE.1.6C The operational user guidance shall, for each user role, describe the security measures to be followed in order to fulfill the security objectives for the operational environment as described in the ST. AGD_OPE.1.7C The operational user guidance shall be clear and reasonable. Evaluator action elements: AGD_OPE.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. Assurance activity: Operational Guidance: The contents of operational guidance are confirmed by the assurance activities in Section 5 and the TOE evaluation in accordance with the CEM. The evaluator shall check to ensure that the following guidance is provided: Procedures for administrators to confirm that the TOE returns to its evaluation configuration after the transition from the maintenance mode to the normal Operational Environment. Application note: During evaluation, the TOE returns to its evaluation configuration. In the field, the TOE may return to the configuration that was in force prior to entering maintenance mode. AGD_PRE.1 Preparative procedures Developer action elements: AGD_PRE.1.1D The developer shall provide the TOE, including its preparative procedures. Developer Note: As with the operational guidance, the developer should look to the assurance activities to determine the required content with respect to preparative procedures. Content and presentation elements: AGD_PRE.1.1C The preparative procedures shall describe all the steps necessary for secure acceptance of the delivered TOE in accordance with the developer’s delivery procedures. AGD_PRE.1.2C The preparative procedures shall describe all the steps necessary for secure installation of the TOE and for the secure preparation of the operational environment in accordance with the security objectives for the operational environment as described in the ST. Evaluator action elements: RICOH Security Target Page 83 of 86 AGD_PRE.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. AGD_PRE.1.2E The evaluator shall apply the preparative procedures to confirm that the TOE can be prepared securely for operation. Class ALC: Life-cycle Support At the assurance level provided for TOEs conformant to this PP, life-cycle support is limited to end-user-visible aspects of the life-cycle, rather than an examination of the TOE vendor’s development and configuration management process. This is not meant to diminish the critical role that a developer’s practices play in contributing to the overall trustworthiness of a product; rather, it’s a reflection on the information to be made available for evaluation at this assurance level. ALC_CMC.1 Labelling of the TOE This component is targeted at identifying the TOE such that it can be distinguished from other products or version from the same vendor and can be easily specified when being procured by an end user. Developer action elements: ALC_CMC.1.1D The developer shall provide the TOE and a reference for the TOE. Content and presentation elements: ALC_CMC.1.1C The TOE shall be labeled with its unique reference. Evaluator action elements: ALC_CMC.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. Assurance activity: Operational Guidance: The evaluator shall check the ST to ensure that it contains an identifier (such as a product name/version number) that specifically identifies the version that meets the requirements of the ST. The evaluator shall ensure that this identifier is sufficient for an acquisition entity to use in procuring the TOE (including the appropriate administrative guidance) as specified in the ST. Further, the evaluator shall check the AGD guidance and TOE samples received for testing to ensure that the version number is consistent with that in the ST. If the vendor maintains a web site advertising the TOE, the evaluator shall examine the information on the web site to ensure that the information in the ST is sufficient to distinguish the product. ALC_CMS.1 TOE CM coverage Given the scope of the TOE and its associated evaluation evidence requirements, this component’s assurance activities are covered by the assurance activities listed for ALC_CMC.1. Developer action elements: RICOH Security Target Page 84 of 86 ALC_CMS.1.1D The developer shall provide a configuration list for the TOE. Content and presentation elements: ALC_CMS.1.1C The configuration list shall include the following: the TOE itself; and the evaluation evidence required by the SARs. ALC_CMS.1.2C The configuration list shall uniquely identify the configuration items. Evaluator action elements: ALC_CMS.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. Assurance activity: Operational Guidance: The “evaluation evidence required by the SARs” in this PP is limited to the information in the ST coupled with the guidance provided to administrators and users under the AGD requirements. By ensuring that the TOE is specifically identified and that this identification is consistent in the ST and in the AGD guidance (as done in the assurance activity for ALC_CMC.1), the evaluator implicitly confirms the information required by this component. Class ATE: Tests Testing is specified for functional aspects of the system as well as aspects that take advantage of design or implementation weaknesses. The former is done through ATE_IND family, while the latter is through the AVA_VAN family. At the assurance level specified in this PP, testing is based on advertised functionality and interfaces as constrained by the availability of design information presented in the TSS. One of the primary outputs of the evaluation process is the test report as specified in the following requirements. ATE_IND.1 Independent testing - Conformance Testing is performed to confirm the functionality described in the TSS as well as the administrative (including configuration and operation) documentation provided. The focus of the testing is to confirm that the requirements specified in Section 5 are being met, although some additional testing is specified for SARs in Section 7. The Assurance Activities identify the minimum testing activities associated with these components. The evaluator produces a test report documenting the plan for and results of testing, as well as coverage arguments focused on the product models combinations that are claiming conformance to this PP. Developer action elements: ATE_IND.1.1D The developer shall provide the TOE for testing. Content and presentation elements: ATE_IND.1.1C The TOE shall be suitable for testing. Evaluator action elements: RICOH Security Target Page 85 of 86 ATE_IND.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ATE_IND.1.2E The evaluator shall test a subset of the TSF to confirm that the TSF operates as specified. Assurance activity: Test: The evaluator shall prepare a test plan and report documenting the testing aspects of the system. The test plan covers all of the testing actions contained in the body of this PP’s Assurance Activities. While it is not necessary to have one test case per test listed in an Assurance Activity, the evaluators must document in the test plan that each applicable testing requirement in the ST is covered. The Test Plan identifies the product models to be tested, and for those product models not included in the test plan but included in the ST, the test plan provides a justification for not testing the models. This justification must address the differences between the tested models and the untested models, and make an argument that the differences do not affect the testing to be performed. It is not sufficient to merely assert that the differences have no affect; rationale must be provided. In case the ST describes multiple models (product names) in particular, the evaluator shall consider the differences in language specification as well as the influences, in which functions except security functions such as a printing function, may affect security functions when creating this justification. If all product models claimed in the ST are tested, then no rationale is necessary. The test plan describes the composition of each product model to be tested, and any setup that is necessary beyond what is contained in the AGD documentation. It should be noted that the evaluators are expected to follow the AGD documentation for installation and setup of each model either as part of a test or as a standard pre-test condition. This may include special test drivers or tools. For each driver or tool, an argument (not just an assertion) is provided that the driver or tool will not adversely affect the performance of the functionality by the TOE. The test plan identifies high-level test objectives as well as the test procedures to be followed to achieve those objectives. These procedures include the goal of the particular procedure, the test steps used to achieve the goal, and the expected results. The test report (which could just be an annotated version of the test plan) details the activities that took place when the test procedures were executed, and includes the actual results of the tests. This shall be a cumulative account, so if there was a test run that resulted in a failure; a fix installed; and then a successful re-run of the test, the report would show a “fail” and “pass” result (and the supporting details), and not just the “pass” result. Class AVA: Vulnerability Assessment For the first generation of this protection profile, the evaluation lab is expected to survey open sources to discover what vulnerabilities have been discovered in these types of products. In most cases, these vulnerabilities will require sophistication beyond that of a basic attacker. Until penetration tools are created and uniformly distributed to the evaluation labs, evaluators will not be expected to test for these vulnerabilities in the TOE. The labs will be expected to comment on the likelihood of these vulnerabilities given the documentation provided by the vendor. This information will be used in the development of penetration testing tools and for the development of future protection profiles. Developer action elements: RICOH Security Target Page 86 of 86 AVA_VAN.1.1D The developer shall provide the TOE for testing. Content and presentation elements: AVA_VAN.1.1C The TOE shall be suitable for testing. Evaluator action elements: AVA_VAN.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. AVA_VAN.1.2E The evaluator shall perform a search of public domain sources to identify potential vulnerabilities in the TOE. AVA_VAN.1.3E The evaluator shall conduct penetration testing, based on the identified potential vulnerabilities, to determine that the TOE is resistant to attacks performed by an attacker possessing basic attack potential. Assurance activity: Test: As with ATE_IND, the evaluator shall generate a report to document their findings with respect to this requirement. This report could physically be part of the overall test report mentioned in ATE_IND, or a separate document. The evaluator performs a search of public information to determine the vulnerabilities that have been found in printing devices and the implemented communication protocols in general, as well as those that pertain to the particular TOE. The evaluator documents the sources consulted and the vulnerabilities found in the report. For each vulnerability found, the evaluator either provides a rationale with respect to its non- applicability, or the evaluator formulates a test (using the guidelines provided in ATE_IND) to confirm the vulnerability, if suitable. Suitability is determined by assessing the attack vector needed to take advantage of the vulnerability. For example, if the vulnerability can be detected by pressing a key combination on boot-up, for example, a test would be suitable at the assurance level of this PP. If exploiting the vulnerability requires an electron microscope and liquid nitrogen, for instance, then a test would not be suitable and an appropriate justification would be formulated.