National Information Assurance Partnership
Common Criteria Evaluation and Validation Scheme
Validation Report
Samsung Electronics Co., Ltd.
Samsung Galaxy Devices on
Android 10 - Fall
Report Number: CCEVS-VR-VID11109-2020
Dated: October 15, 2020
Version: 0.4
National Institute of Standards and Technology National Security Agency
Information Technology Laboratory Information Assurance Directorate
100 Bureau Drive 9800 Savage Road STE 6940
Gaithersburg, MD 20899 Fort George G. Meade, MD 20755-6940
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
ii
ACKNOWLEDGEMENTS
Validation Team
John Butterworth
Jennifer Dotson
Sheldon Durrant
The MITRE Corporation
Common Criteria Testing Laboratory
James Arnold
Tammy Compton
Charles Rice
Gossamer Security Solutions, Inc.
Catonsville, MD
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
iii
Table of Contents
1 Executive Summary.................................................................................................... 1
2 Identification............................................................................................................... 2
3 Architectural Information ........................................................................................... 3
3.1 TOE Evaluated Platforms ................................................................................... 4
3.2 TOE Architecture................................................................................................ 5
3.3 Physical Boundaries............................................................................................ 5
4 Security Policy............................................................................................................ 5
4.1 Security audit ...................................................................................................... 6
4.2 Cryptographic support ........................................................................................ 6
4.3 User data protection ............................................................................................ 6
4.4 Identification and authentication......................................................................... 6
4.5 Security management.......................................................................................... 7
4.6 Protection of the TSF.......................................................................................... 7
4.7 TOE access.......................................................................................................... 7
4.8 Trusted path/channels ......................................................................................... 8
5 Assumptions................................................................................................................ 8
6 Clarification of Scope ................................................................................................. 8
7 Documentation............................................................................................................ 9
8 IT Product Testing ...................................................................................................... 9
8.1 Developer Testing............................................................................................... 9
8.2 Evaluation Team Independent Testing ............................................................... 9
9 Evaluated Configuration ........................................................................................... 10
10 Results of the Evaluation .......................................................................................... 10
10.1 Evaluation of the Security Target (ASE).......................................................... 10
10.2 Evaluation of the Development (ADV)............................................................ 10
10.3 Evaluation of the Guidance Documents (AGD) ............................................... 10
10.4 Evaluation of the Life Cycle Support Activities (ALC) ................................... 11
10.5 Evaluation of the Test Documentation and the Test Activity (ATE) ............... 11
10.6 Vulnerability Assessment Activity (VAN)....................................................... 11
10.7 Summary of Evaluation Results........................................................................ 12
11 Validator Comments/Recommendations .................................................................. 12
12 Annexes..................................................................................................................... 13
13 Security Target.......................................................................................................... 13
14 Glossary .................................................................................................................... 13
15 Bibliography ............................................................................................................. 13
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
1
1 Executive Summary
This report documents the assessment of the National Information Assurance Partnership
(NIAP) validation team of the evaluation of Samsung Galaxy Devices on Android 10
solution provided by Samsung Electronics Co., Ltd. It presents the evaluation results, their
justifications, and the conformance results. This Validation Report is not an endorsement
of the Target of Evaluation by any agency of the U.S. government, and no warranty is
either expressed or implied.
The evaluation was performed by the Gossamer Security Solutions (Gossamer) Common
Criteria Testing Laboratory (CCTL) in Catonsville, MD, United States of America, and
was completed in October 2020. The information in this report is largely derived from the
Evaluation Technical Report (ETR) and associated test reports, all written by Gossamer
Security Solutions. The evaluation determined that the product is both Common Criteria
Part 2 Extended and Part 3 Conformant, and meets the assurance requirements of the
Protection Profile for Mobile Device Fundamentals, Version 3.1, 16 June 2017, General
Purpose Operating Systems Protection Profile/Mobile Device Fundamentals Protection
Profile Extended Package (EP) Wireless Local Area Network (WLAN) Clients, Version
1.0, 08 February 2016 and PP-Module for Virtual Private Network (VPN) Clients, Version
2.1, 05 October 2017.
The Target of Evaluation (TOE) is the Samsung Galaxy Devices on Android 10 - Fall.
The Target of Evaluation (TOE) identified in this Validation Report has been evaluated at a
NIAP approved Common Criteria Testing Laboratory using the Common Methodology for
IT Security Evaluation (Version 3.1, Rev 5) for conformance to the Common Criteria for
IT Security Evaluation (Version 3.1, Rev 5). This Validation Report applies only to the
specific version of the TOE as evaluated. The evaluation has been conducted in
accordance with the provisions of the NIAP Common Criteria Evaluation and Validation
Scheme and the conclusions of the testing laboratory in the evaluation technical report are
consistent with the evidence provided.
The validation team monitored the activities of the evaluation team, provided guidance on
technical issues and evaluation processes, and reviewed the individual work units and
successive versions of the ETR. The validation team found that the evaluation showed that
the product satisfies all of the functional requirements and assurance requirements stated in
the Security Target (ST). Therefore, the validation team concludes that the testing
laboratory’s findings are accurate, the conclusions justified, and the conformance results
are correct. The conclusions of the testing laboratory in the evaluation technical report are
consistent with the evidence produced.
The technical information included in this report was obtained from the Samsung
Electronics Co., Ltd. Samsung Electronics Co., Ltd. Samsung Galaxy Devices on Android
10 - Fall Security Target, Version 1.0, 09/18/2020 and analysis performed by the
Validation Team.
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
2
2 Identification
The CCEVS is a joint National Security Agency (NSA) and National Institute of Standards
and Technology (NIST) effort to establish commercial facilities to perform trusted product
evaluations. Under this program, security evaluations are conducted by commercial testing
laboratories called Common Criteria Testing Laboratories (CCTLs) using the Common
Evaluation Methodology (CEM) in accordance with National Voluntary Laboratory
Assessment Program (NVLAP) accreditation.
The NIAP Validation Body assigns Validators to monitor the CCTLs to ensure quality and
consistency across evaluations. Developers of information technology products desiring a
security evaluation contract with a CCTL and pay a fee for their product’s evaluation.
Upon successful completion of the evaluation, the product is added to NIAP’s Validated
Products List.
Table 1 provides information needed to completely identify the product, including:
 The Target of Evaluation (TOE): the fully qualified identifier of the product as
evaluated.
 The Security Target (ST), describing the security features, claims, and assurances of the
product.
 The conformance result of the evaluation.
 The Protection Profile to which the product is conformant.
 The organizations and individuals participating in the evaluation.
Table 1: Evaluation Identifiers
Item Identifier
Evaluation Scheme United States NIAP Common Criteria Evaluation and Validation Scheme
TOE Samsung Galaxy Devices on Android 10 - Fall
Protection Profile
(Specific models identified in Section 3.1)
Protection Profile for Mobile Device Fundamentals, Version 3.1, 16 June 2017,
General Purpose Operating Systems Protection Profile/Mobile Device
Fundamentals Protection Profile Extended Package (EP) Wireless Local Area
Network (WLAN) Clients, Version 1.0, 08 February 2016 and PP-Module for
Virtual Private Network (VPN) Clients, Version 2.1, 05 October 2017
ST Samsung Electronics Co., Ltd. Samsung Galaxy Devices on Android 10 - Fall
Security Target, Version 1.0 09/18/2020
Evaluation Technical
Report
Evaluation Technical Report for Samsung Galaxy Devices on Android 10,
Version 0.3, 10/13/2020
CC Version Common Criteria for Information Technology Security Evaluation, Version 3.1,
rev 5
Conformance Result CC Part 2 extended, CC Part 3 conformant
Sponsor Samsung Electronics Co., Ltd.
Developer Samsung Electronics Co., Ltd.
Common Criteria
Testing Lab (CCTL)
Gossamer Security Solutions, Inc.
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
3
Item Identifier
CCEVS Validators John Butterworth
Jenn Dotson
Sheldon Durrant
The MITRE Corporation
3 Architectural Information
Note: The following architectural description is based on the description presented in the
Security Target.
The TOE is a mobile device based on Android 10 with a built-in IPsec VPN client and
modifications made to increase the level of security provided to end users and enterprises.
The TOE is intended for use as part of an enterprise mobility solution providing mobile
staff with enterprise connectivity.
The TOE includes a Common Criteria mode (or “CC mode”) that an administrator can
invoke using an MDM. The TOE must meet the following prerequisites in order for an
administrator to transition the TOE to and remain in the CC configuration.
 Require a boot and device lock password (swipe, PIN, pattern, accessibility (direction),
screen locks are not allowed). Acceptable biometrics vary with the device for the
device lock.
 The maximum password failure retry policy should be less than or equal to 30.
 A screen lock password required to decrypt data on boot.
 Revocation checking must be enabled.
 External storage must be encrypted.
 Password (non-container) recovery policy and password history must not be enabled.
 When CC mode has been enabled, the TOE behaves as follows:
o The TOE sets the system wide Android CC mode property to be enabled.
o The TOE prevents loading of custom firmware/kernels and requires all
updates occur through FOTA.
o The TOE utilizes CAVP approved cryptographic ciphers for TLS.
o The TOE ensures FOTA updates utilize 2048-bit PKCS #1 RSA-PSS
formatted signatures (with SHA-512 hashing).
The TOE includes a containerization capability, Knox Workspace container, which is part
of the Knox Platform. This container provides a way to segment applications and data into
two separate areas on the device, such as a personal area and a work area, each with its own
separate apps, data and security policies. For this effort, the TOE was evaluated both
without and with a Knox Workspace container created. Thus, the evaluation includes
several Knox-specific claims that apply to a Knox Workspace container when created.
There are different models of the TOE, the Samsung Galaxy Devices on Android 10, and
these models differ in their internal components (as described in Evaluated Configuration
section below).
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
4
3.1 TOE Evaluated Platforms
The model numbers of the mobile devices used during evaluation testing are as follows. All
devices were running Android 10.
Device Name
Model
Number
Chipset
Vendor
SoC
Kernel
Version
Build Number
Galaxy A71 5G SM-A716V Qualcomm SM7250 4.19.81 QP1A.190711.020
Galaxy Tab Active3 SM-T575 Samsung Exynos 9810 4.9.191 QP1A.190711.020
Galaxy Tab S4 SM-T837A Qualcomm MSM8998 4.4.205 QP1A.190711.020
Table 1 - Evaluated Devices
In addition to the evaluated devices, the following device models are claimed as equivalent
with a note about the differences between the evaluated device and the equivalent models.
Evaluated Device SoC Equivalent Devices Differences
Galaxy A71 5G SM7250 Galaxy A51 5G A71 5G > A51 5G in terms of display size
Galaxy Tab Active3 Exynos 9810 Galaxy Tab Active3 T577 & T575 tablets have 5G
T570 tablets only have Wi-Fi
Galaxy Tab S4 MSM8998 Galaxy Tab S4 T837 & T835 tablets have LTE
T830 tablets only have Wi-Fi
Table 2 - Equivalent Devices
In general, the devices include a final letter or number at the end of the name that denotes
that the device is for a specific carrier or region (for example, U = US Carrier build and F =
International, which were used during the evaluation).
For each device, there are specific models that are validated. This table lists the specific
carrier models that have the validated configuration (covering both evaluated and
equivalent devices).
Device Name Chipset Vendor Base Model Number Carrier Models
Galaxy A71 5G Qualcomm SM-A716 U, V
Galaxy A51 5G Qualcomm SM-A516 D, V
Galaxy Tab Active3 Samsung SM-T577 U
SM-T575 N, None
SM-T570 None
Galaxy Tab S4 Qualcomm SM-T837 A, P, R4, T, V
SM-T835 N, None
SM-T830 None
Table 3 – Carrier Models
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
5
3.2 TOE Architecture
The TOE combines with a Mobile Device Management solution (note that this evaluation
does not include an MDM agent nor server) that enables the Enterprise to watch, control
and administer all deployed mobile devices, across multiple mobile service providers as
well as facilitate secure communications through a VPN. This partnership provides a secure
mobile environment that can be managed and controlled by the environment and reduces
the risks that can be introduced through a Bring-Your-Own-Device (BYOD) model which
can be extended to Corporate-Owned-Personally-Enabled (COPE) or other corporate-
owned deployments.
Data on the TOE is protected through the implementation of Samsung On-Device
Encryption (ODE) or File-Based Encryption (FBE) (depending on the device see the
Security Target for a list of devices and which DAR encryption is used) that utilizes a
CAVP certified cryptographic algorithms to encrypt device storage. This functionality is
combined with a number of on-device policies including local wipe, remote wipe,
password complexity, automatic lock and privileged access to security configurations to
prevent unauthorized access to the device and stored data.
The Samsung Knox Software Development Kit (SDK) builds on top of the existing
Android security model by expanding the current set of security configuration options to
more than 600 configurable policies and including additional security functionality such as
application whitelisting and blacklisting.
The Knox Platform for Enterprise provides a set of flexible deployment options for Work
environments, including the ability to enhance the BYOD or COPE models by creating a
separate container for the Enterprise (the Workspace). Within the Knox Workspace, the
Enterprise can provision separate applications and ensure they are kept separate from
anything the user may do outside the Knox Workspace. The Enterprise can use policy
controls to manage a Work environment on the device as a whole or within the Knox
Workspace container specifically, as needed by the organization.
3.3 Physical Boundaries
The TOE is a multi-user mobile device based on Android 10 that incorporates the Samsung
Knox SDK. The TOE does not include the user applications that run on top of the operating
system, but does include controls that limit application behavior. The TOE includes an
IPsec VPN client integrated into the firmware (as opposed to a downloadable application).
Within an Enterprise environment, the Enterprise can manage the configuration of the
mobile device, including the VPN client, through a compliant device management solution.
The TOE communicates and interacts with 802.11-2012 Access Points and mobile data
networks to establish network connectivity, and the through that connectivity interacts with
MDM servers that allow administrative control of the TOE.
4 Security Policy
This section summarizes the security functionality of the TOE:
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
6
1. Security audit
2. Cryptographic support
3. User data protection
4. Identification and authentication
5. Security management
6. Protection of the TSF
7. TOE access
8. Trusted path/channels
4.1 Security audit
The TOE generates logs for a range of security relevant events. The TOE stores the logs
locally so they can be accessed by an administrator or they can be exported to an MDM.
4.2 Cryptographic support
The TOE includes multiple cryptographic libraries with CAVP certified algorithms for a
wide range of cryptographic functions including the following: asymmetric key generation
and establishment, symmetric key generation, encryption/decryption, cryptographic
hashing and keyed-hash message authentication. These functions are supported with
suitable random bit generation, key derivation, salt generation, initialization vector
generation, secure key storage, and key and protected data destruction. These primitive
cryptographic functions are used to implement security protocols such as TLS, EAP-TLS,
IPsec, and HTTPS and to encrypt the media (including the generation and protection of
data and key encryption keys) used by the TOE. Many of these cryptographic functions are
also accessible as services to applications running on the TOE.
4.3 User data protection
The TOE controls access to system services by hosted applications, including protection of
the Trust Anchor Database. Additionally, the TOE protects user and other sensitive data
using encryption so that even if a device is physically lost, the data remains protected. The
functionality provided by a Knox Workspace container enhances the security of user data
by providing an additional layer of separation between different categories of apps and data
while the device is in use. The TOE ensures that residual information is protected from
potential reuse in accessible objects such as network packets.
4.4 Identification and authentication
The TOE supports a number of features related to identification and authentication. From a
user perspective, except for making phone calls to an emergency number, a password or
Biometric Authentication Factor (BAF) must be correctly entered to unlock the TOE. In
addition, even when the TOE is unlocked the password must be re-entered to change the
password or re-enroll the biometric template. Passwords are obscured when entered so they
cannot be read from the TOE's display, the frequency of entering passwords is limited and
when a configured number of failures occurs, the TOE will be wiped to protect its contents.
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
7
Passwords can be constructed using upper and lower case characters, numbers, and special
characters and passwords between 4 and 16 characters are supported.
The TOE can also serve as an 802.1X supplicant and can use X.509v3 and validate
certificates for EAP-TLS, TLS and IPsec exchanges. The TOE can also act as a client or
server in an authenticated Bluetooth pairing. In addition to storing X.509 certificates used
for IPsec connections, the TOE can also securely store pre-shared keys for VPN
connections.
4.5 Security management
The TOE provides all the interfaces necessary to manage the security functions (including
the VPN client) identified throughout this Security Target as well as other functions
commonly found in mobile devices. Many of the available functions are available to users
of the TOE while many are restricted to administrators operating through a Mobile Device
Management solution once the TOE has been enrolled. Once the TOE has been enrolled
and then un-enrolled, it removes all MDM policies and disables CC mode.
4.6 Protection of the TSF
The TOE implements a number of features to protect itself to ensure the reliability and
integrity of its security features. It protects particularly sensitive data such as cryptographic
keys so that they are not accessible or exportable. It also provides its own timing
mechanism to ensure that reliable time information is available (e.g., for log
accountability). It enforces read, write, and execute memory page protections, uses address
space layout randomization, and stack-based buffer overflow protections to minimize the
potential to exploit application flaws. It also protects itself from modification by
applications as well as isolates the address spaces of applications from one another to
protect those applications.
The TOE includes functions to perform self-tests and software/firmware integrity checking
so that it might detect when it is failing or may be corrupt. If any self-tests fail, the TOE
will not go into an operational mode. It also includes mechanisms (i.e., verification of the
digital signature of each new image) so that the TOE itself can be updated while ensuring
that the updates will not introduce malicious or other unexpected changes in the TOE.
Digital signature checking also extends to verifying applications prior to their installation.
4.7 TOE access
The TOE can be locked, obscuring its display, by the user or after a configured interval of
inactivity. The TOE also has the capability to display an advisory message (banner) when
users unlock the TOE for use.
The TOE is also able to attempt to connect to wireless networks as configured.
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
8
4.8 Trusted path/channels
The TOE supports the use of 802.11-2012, 802.1X, EAP-TLS, TLS, HTTPS and IPsec to
secure communications channels between itself and other trusted network devices.
5 Assumptions
The Security Problem Definition, including the assumptions, may be found in the following
documents:
 Protection Profile for Mobile Device Fundamentals, Version 3.1, 16 June 2017,
General Purpose Operating Systems Protection Profile/Mobile Device
Fundamentals Protection Profile Extended Package (EP) Wireless Local Area
Network (WLAN) Clients, Version 1.0, 08 February 2016 and PP-Module for
Virtual Private Network (VPN) Clients, Version 2.1, 05 October 2017
That information has not been reproduced here and the MDFPP31/WLANCEP10/VPNC21
should be consulted if there is interest in that material.
The scope of this evaluation was limited to the functionality and assurances covered in the
MDFPP31/WLANCEP10/VPNC21 as described for this TOE in the Security Target. Other
functionality included in the product was not assessed as part of this evaluation. All other
functionality provided by the devices needs to be assessed separately, and no further
conclusions can be drawn about their effectiveness.
6 Clarification of Scope
All evaluations (and all products) have limitations, as well as potential misconceptions that
need clarification. This text covers some of the more important limitations and
clarifications of this evaluation. Note that:
 As with any evaluation, this evaluation only shows that the evaluated configuration
meets the security claims made with a certain level of assurance (the assurance
activities specified in the Mobile Device Fundamentals Protection Profile and
General Purpose Operating Systems Protection Profile/Mobile Device
Fundamentals Protection Profile Extended Package (EP) Wireless Local Area
Network (WLAN) Clients and Virtual Private Network (VPN) Clients PP-Module
and performed by the evaluation team).
 This evaluation covers only the specific device models and software as identified in
this document, and not any earlier or later versions released or in process.
 Apart from the MDF Admin Guide, additional customer documentation for the
specific mobile device models was not included in the scope of the evaluation and
therefore should not to be relied upon when configuring or operating the device as
evaluated.
 This evaluation did not specifically search for, nor attempt to exploit, vulnerabilities
that were not “obvious” or vulnerabilities to objectives not claimed in the ST. The
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
9
CEM defines an “obvious” vulnerability as one that is easily exploited with a
minimum of understanding of the TOE, technical sophistication and resources.
 The functionality evaluated is scoped exclusively to the security functional
requirements specified in the MDFPP31/WLANCEP10/VPNC21 and applicable
Technical Decisions. Any additional security related functional capabilities of the
TOE were not covered by this evaluation.
 While an MDM can be used in configuring the TOE into CC Mode, an MDM agent
and server were not included and thus MDM functionality was not evaluated.
 The security functionality provided by the Knox Workspace container is limited to
the Knox-specific claims made in this evaluation. All other functionality provided
by the container is out of scope.
7 Documentation
The following documents were available with the TOE for evaluation:
 Samsung Android 10 on Galaxy Devices Administrator Guide, version 6.3,
September 18, 2020
Any additional customer documentation provided with the product, or that is available
online was not included in the scope of the evaluation and therefore should not to be relied
upon when configuring or operating the device as evaluated.
To use the product in the evaluated configuration, the product must be configured as
specified in the Guidance Documentation listed above. Consumers are encouraged to
download the configuration guides from the NIAP website to ensure the device is
configured as evaluated.
8 IT Product Testing
This section describes the testing efforts of the developer and the Evaluation Team. It is
derived from information contained in the proprietary Detailed Test Report
(MDFPP31/WLANCEP10/VPNC21) for Samsung Galaxy Devices on Android 10 - Fall,
Version 0.3, 10/13/2020 (DTR), as summarized in the evaluation Assurance Activity
Report.
8.1 Developer Testing
No evidence of developer testing is required in the assurance activities for this product.
8.2 Evaluation Team Independent Testing
The evaluation team verified the product according a Common Criteria Certification
document and ran the tests specified in the MDFPP31/WLANCEP10/VPNC21 including
the tests associated with optional requirements. The AAR, in sections 1.1 lists the tested
devices, provides a list of test tools, and has diagrams of the test environment.
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
10
9 Evaluated Configuration
See Section 3.1.
10 Results of the Evaluation
The results of the assurance requirements are generally described in this section and are
presented in detail in the proprietary ETR. The reader of this document can assume that all
assurance activities and work units received a passing verdict.
A verdict for an assurance component is determined by the resulting verdicts assigned to
the corresponding evaluator action elements. The evaluation was conducted based upon
CC version 3.1 rev 5 and CEM version 3.1 rev 5. The evaluation determined the Samsung
Galaxy Devices on Android 10 – Fall TOE to be Part 2 extended, and to meet the SARs
contained in the MDFPP31/WLANCEP10/VPNC21.
10.1 Evaluation of the Security Target (ASE)
The evaluation team applied each ASE CEM work unit. The ST evaluation ensured the ST
contains a description of the environment in terms of policies and assumptions, a statement
of security requirements claimed to be met by the Samsung Galaxy Devices on Android 10
products that are consistent with the Common Criteria, and product security function
descriptions that support the requirements.
The validators reviewed the work of the evaluation team, and found that sufficient evidence
and justification was provided by the evaluation team to confirm that the evaluation was
conducted in accordance with the requirements of the CEM, and that the conclusion
reached by the evaluation team was justified.
10.2 Evaluation of the Development (ADV)
The evaluation team applied each ADV CEM work unit. The evaluation team assessed the
design documentation and found it adequate to aid in understanding how the TSF provides
the security functions. The design documentation consists of a functional specification
contained in the Security Target and Guidance documents. Additionally, the evaluation
team performed the assurance activities specified in the
MDFPP31/WLANCEP10/VPNC21 related to the examination of the information contained
in the TSS.
The validators reviewed the work of the evaluation team and found that sufficient evidence
and justification was provided by the evaluation team to confirm that the evaluation was
conducted in accordance with the requirements of the CEM, and that the conclusion
reached by the evaluation team was justified.
10.3 Evaluation of the Guidance Documents (AGD)
The evaluation team applied each AGD CEM work unit. The evaluation team ensured the
adequacy of the user guidance in describing how to use the operational TOE. Additionally,
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
11
the evaluation team ensured the adequacy of the administrator guidance in describing how
to securely administer the TOE. All of the guides were assessed during the design and
testing phases of the evaluation to ensure they were complete.
The validators reviewed the work of the evaluation team and found that sufficient evidence
and justification was provided by the evaluation team to confirm that the evaluation was
conducted in accordance with the requirements of the CEM, and that the conclusion
reached by the evaluation team was justified.
10.4 Evaluation of the Life Cycle Support Activities (ALC)
The evaluation team applied each ALC CEM work unit. The evaluation team found that
the TOE was identified.
The validators reviewed the work of the evaluation team and found that sufficient evidence
and justification was provided by the evaluation team to confirm that the evaluation was
conducted in accordance with the requirements of the CEM, and that the conclusion
reached by the evaluation team was justified.
10.5 Evaluation of the Test Documentation and the Test Activity (ATE)
The evaluation team applied each ATE CEM work unit. The evaluation team ran the set of
tests specified by the assurance activities in the MDFPP31/WLANCEP10/VPNC21 and
recorded the results in a Test Report, summarized in the AAR.
The validators reviewed the work of the evaluation team and found that sufficient evidence
and justification was provided by the evaluation team to confirm that the evaluation was
conducted in accordance with the requirements of the CEM, and that the conclusion
reached by the evaluation team was justified.
10.6 Vulnerability Assessment Activity (VAN)
The evaluation team applied each AVA CEM work unit. The vulnerability analysis is in the
Detailed Test Report (DTR) prepared by the evaluator. The vulnerability analysis includes
a public search for vulnerabilities. The public search for vulnerabilities conducted on
09/21/2020 did not uncover any residual vulnerability.
The evaluator searched the National Vulnerability Database
(https://web.nvd.nist.gov/view/vuln/search) and Vulnerability Notes Database
(http://www.kb.cert.org/vuls/) with the following search terms: “Samsung Tab S4", "SM-
T837A", "Samsung A71", "SM-A716V", “Tab Active3”, “SM-T575”, "Knox", "Android",
"BoringSSL", "strongswan", and "charon".
The validators reviewed the work of the evaluation team, and found that sufficient evidence
and justification was provided by the evaluation team to confirm that the evaluation was
conducted in accordance with the requirements of the CEM, and that the conclusion
reached by the evaluation team was justified.
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
12
10.7 Summary of Evaluation Results
The evaluation team’s assessment of the evaluation evidence demonstrates that the claims
in the ST are met. Additionally, the evaluation team’s testing also demonstrated the
accuracy of the claims in the ST.
The validation team’s assessment of the evidence provided by the evaluation team is that it
demonstrates that the evaluation team followed the procedures defined in the CEM, and
correctly verified that the product meets the claims in the ST.
11 Validator Comments/Recommendations
The validators suggest that the consumer pay particular attention to the evaluated
configuration of the device(s). The functionality evaluated is scoped exclusively to the
security functional requirements specified in the Security Target, and only the functionality
implemented by the SFR’s within the Security Target was evaluated. All other functionality
provided by the devices, to include software that was not part of the evaluated
configuration, needs to be assessed separately and no further conclusions can be drawn
about their effectiveness.
The biometric authentication factors tested as part of this evaluation were limited to
fingerprint and iris recognition; thus, they are the only two biometric authentication factors
allowed in the evaluated configuration. As mentioned in both the Security Target and the
AAR, not all evaluated devices support both iris and fingerprint authentication
mechanisms. Specifically, only the Galaxy Tab S4 (SM-T837A) devices support iris
authentication.
The validators encourage the consumers of these products to understand the relationship
between the products and any functionality that may be provided via Mobile Device
Management (MDM), Enterprise Device Management (EDM), and Enterprise Mobility
Management (EMM) solutions (hereafter collectively referred to as MDM solutions). This
evaluation neither covers, nor endorses, the use of any particular MDM solution; only the
MDM-like interfaces of the products were exercised as part of the evaluation. In practice,
the Samsung EDMapp and STIGtool are not available, though its settings could be
managed via a suitable MDM solution and corresponding agent. Samsung does not intend
to make the EDMApp and STIGtool available; however, the APIs used by these tools have
been made available by Samsung. Per Section 2.3.2 of the Admin Guide, “this EDM should
support the Samsung Knox APIs to enable the capabilities documented in this guide.”
Further, the Admin Guide states that the “Common Criteria Configuration section provides
the specific information about the Knox APIs that are necessary to support this
configuration….” Because the EDMApp and STIGtool apps are not available and do not
intend to be made available, a compatible MDM solution is required for the TOE to be
placed in CC Mode, which in turn, places it in the evaluated configuration.
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
13
12 Annexes
Not applicable
13 Security Target
The Security Target is identified as: Samsung Electronics Co., Ltd. Samsung Galaxy
Devices on Android 10 - Fall (MDFPP31/WLANCEP10/VPNC21) Security Target,
Version 1.0, 09/18/2020.
14 Glossary
The following definitions are used throughout this document:
 Common Criteria Testing Laboratory (CCTL). An IT security evaluation facility
accredited by the National Voluntary Laboratory Accreditation Program (NVLAP) and
approved by the CCEVS Validation Body to conduct Common Criteria-based
evaluations.
 Conformance. The ability to demonstrate in an unambiguous way that a given
implementation is correct with respect to the formal model.
 Evaluation. The assessment of an IT product against the Common Criteria using the
Common Criteria Evaluation Methodology to determine whether or not the claims
made are justified; or the assessment of a protection profile against the Common
Criteria using the Common Evaluation Methodology to determine if the Profile is
complete, consistent, technically sound and hence suitable for use as a statement of
requirements for one or more TOEs that may be evaluated.
 Evaluation Evidence. Any tangible resource (information) required from the sponsor
or developer by the evaluator to perform one or more evaluation activities.
 Feature. Part of a product that is either included with the product or can be ordered
separately.
 Target of Evaluation (TOE). A group of IT products configured as an IT system, or
an IT product, and associated documentation that is the subject of a security evaluation
under the CC.
 Validation. The process carried out by the CCEVS Validation Body leading to the
issue of a Common Criteria certificate.
 Validation Body. A governmental organization responsible for carrying out validation
and for overseeing the day-to-day operation of the NIAP Common Criteria Evaluation
and Validation Scheme.
15 Bibliography
The Validation Team used the following documents to produce this Validation Report:
Samsung Galaxy Devices on Android 10-Fall Validation Report Version 0.4, October 15, 2020
14
[1] Common Criteria for Information Technology Security Evaluation: Part 1:
Introduction and General Model, Version 3.1, Revision 5, April 2017.
[2] Common Criteria for Information Technology Security Evaluation Part 2: Security
functional components, Version 3.1, Revision 5, April 2017.
[3] Common Criteria for Information Technology Security Evaluation Part 3: Security
assurance components, Version 3.1 Revision 5, April 2017.
[4] Protection Profile for Mobile Device Fundamentals, Version 3.1, 16 June 2017,
General Purpose Operating Systems Protection Profile/Mobile Device
Fundamentals Protection Profile Extended Package (EP) Wireless Local Area
Network (WLAN) Clients, Version 1.0, 08 February 2016 and PP-Module for
Virtual Private Network (VPN) Clients, Version 2.1, 05 October 2017.
[5] Samsung Electronics Co., Ltd. Samsung Galaxy Devices on Android 10 - Fall
Security Target, Version 1.0, 09/18/2020 (ST).
[6] Assurance Activity Report (MDFPP31/WLANCEP10/VPNC21) for Samsung
Galaxy Devices on Android 10, Version 0.3, 10/13/2020 (AAR).
[7] Detailed Test Report (MDFPP31/WLANCEP10/VPNC21) for Samsung Galaxy
Devices on Android 10, Version 0.3, 10/13/2020 (DTR).
[8] Evaluation Technical Report for Samsung Galaxy Devices on Android 10, Version
0.3, 10/13/2020 (ETR).