STMicroelectronics ST31G480 E01 including optional cryptographic library NESLIB, and optional technologies MIFARE® DESFire® EV1 and MIFARE Plus® X Security Target for composition Common Criteria for IT security evaluation SMD_ST31G480_ST_18_002 Rev E01.2 December 2018 www.st.com BLANK December 2018 SMD_ST31G480_ST_18_002 Rev E01.2 3/144 ST31G480 E01 platform Security Target for composition Common Criteria for IT security evaluation 1 Introduction (ASE_INT) 1.1 Security Target reference 1 Document identification: ST31G480 E01 including optional cryptographic library NesLib, and optional technologies MIFARE® DESFire® EV1 and MIFARE Plus® X SECURITY TARGET FOR COMPOSITION. 2 Version number: Rev E01.2, issued in December 2018. 3 Registration: registered at ST Microelectronics under number SMD_ST31G480_ST_18_002. 1.2 TOE reference 4 This document presents the Security Target for composition (ST) of the ST31G480 E01 Security Integrated Circuit (IC), designed on the ST31 platform of STMicroelectronics, with firmware version 3.0.1, optional cryptographic library NesLib 6.2.1, optional technology MIFARE® DESFire® EV1(a) 4.8.12, and optional technology MIFARE Plus® X(b) 2.4.6. 5 The precise reference of the Target of Evaluation (TOE) is given in Section 1.4: TOE identification and the security IC features are given in Section 1.6: TOE description. 6 A glossary of terms and abbreviations used in this document is given in Appendix A: Glossary. a. MIFARE DESFire are registered trademarks of NXP B.V. and are used under license. b. MIFARE and MIFARE Plus are registered trademarks of NXP B.V. and are used under license. www.st.com Contents ST31G480 E01 platform Security Target for composition 4/144 SMD_ST31G480_ST_18_002 Contents 1 Introduction (ASE_INT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 Security Target reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 TOE reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.3 Context . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 1.4 TOE identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 1.5 TOE overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1.6 TOE description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1.6.1 TOE hardware description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1.6.2 TOE software description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 1.6.3 TOE documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 1.7 TOE life cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 1.8 TOE environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 1.8.1 TOE Development Environment (Phase 2) . . . . . . . . . . . . . . . . . . . . . . 20 1.8.2 TOE production environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 1.8.3 TOE operational environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2 Conformance claims (ASE_CCL, ASE_ECD) . . . . . . . . . . . . . . . . . . . . 22 2.1 Common Criteria conformance claims . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2.2 PP Claims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2.2.1 PP Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2.2.2 PP Additions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2.2.3 PP Claims rationale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3 Security problem definition (ASE_SPD) . . . . . . . . . . . . . . . . . . . . . . . . 24 3.1 Description of assets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 3.2 Threats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3.3 Organisational security policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 3.4 Assumptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4 Security objectives (ASE_OBJ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 4.1 Security objectives for the TOE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 4.2 Security objectives for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . 43 4.3 Security objectives rationale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 ST31G480 E01 platform Security Target for composition Contents SMD_ST31G480_ST_18_002 5/144 4.3.1 Assumption "Usage of secure values for MFPlus" . . . . . . . . . . . . . . . . 49 4.3.2 Assumption "Terminal support to ensure integrity and confidentiality for MFPlus" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 4.3.3 Assumption "Usage of secure values for DESFire" . . . . . . . . . . . . . . . . 50 4.3.4 Assumption "Terminal support to ensure integrity and confidentiality for DESFire" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 4.3.5 TOE threat "Abuse of Functionality" . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 4.3.6 TOE threat "Memory Access Violation" . . . . . . . . . . . . . . . . . . . . . . . . . 50 4.3.7 TOE threat "Diffusion of open samples" . . . . . . . . . . . . . . . . . . . . . . . . 51 4.3.8 TOE threat "Unauthorised data modification for MFPlus" . . . . . . . . . . . 51 4.3.9 TOE threat "Impersonating authorised users during authentication for MFPlus" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 4.3.10 TOE threat "Cloning for MFPlus" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 4.3.11 TOE threat "MFPlus resource unavailability" . . . . . . . . . . . . . . . . . . . . . 52 4.3.12 TOE threat "MFPlus code confidentiality" . . . . . . . . . . . . . . . . . . . . . . . 52 4.3.13 TOE threat "MFPlus data confidentiality" . . . . . . . . . . . . . . . . . . . . . . . . 52 4.3.14 TOE threat "MFPlus code integrity" . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 4.3.15 TOE threat "MFPlus data integrity" . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 4.3.16 TOE threat "Unauthorised data modification for DESFire" . . . . . . . . . . 53 4.3.17 TOE threat "Impersonating authorised users during authentication for DESFire" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 4.3.18 TOE threat "Cloning for DESFire" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 4.3.19 TOE threat "DESFire resource unavailability" . . . . . . . . . . . . . . . . . . . . 54 4.3.20 TOE threat "DESFire code confidentiality" . . . . . . . . . . . . . . . . . . . . . . . 54 4.3.21 TOE threat "DESFire data confidentiality" . . . . . . . . . . . . . . . . . . . . . . . 54 4.3.22 TOE threat "DESFire code integrity" . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 4.3.23 TOE threat "DESFire data integrity" . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 4.3.24 Organisational security policy "Controlled usage to Loader Functionality" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 4.3.25 Organisational security policy "Additional Specific Security Functionality" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 4.3.26 Organisational security policy "Confidentiality during communication for MFPlus" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 4.3.27 Organisational security policy "Integrity during communication for MFPlus" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 4.3.28 Organisational security policy "Un-traceability of end-users for MFPlus" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 4.3.29 Organisational security policy "Confidentiality during communication for DESFire" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 4.3.30 Organisational security policy "Transaction mechanism for DESFire" . . 57 Contents ST31G480 E01 platform Security Target for composition 6/144 SMD_ST31G480_ST_18_002 4.3.31 Organisational security policy "Un-traceability of end-users for DESFire" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 4.3.32 Organisational security policy "Treatment of user data" . . . . . . . . . . . . 57 5 Security requirements (ASE_REQ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.1 Security functional requirements for the TOE . . . . . . . . . . . . . . . . . . . . . 59 5.1.1 Security Functional Requirements from the Protection Profile . . . . . . . 64 5.1.2 Additional Security Functional Requirements for the cryptographic services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 5.1.3 Additional Security Functional Requirements for the memories protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 5.1.4 Additional Security Functional Requirements related to the loading and authentication capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 5.1.5 Additional Security Functional Requirements related to the Secure Diagnostic capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 5.1.6 The TSF shall provide the audit records in a manner suitable for the user to interpret the information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 5.1.7 Additional Security Functional Requirements related to MFPlus . . . . . . 76 5.1.8 Additional Security Functional Requirements related to DESFire . . . . . 81 5.1.9 Additional Security Functional Requirements common to DESFire and MFPlus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 5.2 TOE security assurance requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 5.3 Refinement of the security assurance requirements . . . . . . . . . . . . . . . . 89 5.3.1 Refinement regarding functional specification (ADV_FSP) . . . . . . . . . . 90 5.3.2 Refinement regarding test coverage (ATE_COV) . . . . . . . . . . . . . . . . . 91 5.4 Security Requirements rationale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 5.4.1 Rationale for the Security Functional Requirements . . . . . . . . . . . . . . . 91 5.4.2 Additional security objectives are suitably addressed . . . . . . . . . . . . . . 98 5.4.3 Additional security requirements are consistent . . . . . . . . . . . . . . . . . 106 5.4.4 Dependencies of Security Functional Requirements . . . . . . . . . . . . . . 109 5.4.5 Rationale for the Assurance Requirements . . . . . . . . . . . . . . . . . . . . . 116 6 TOE summary specification (ASE_TSS) . . . . . . . . . . . . . . . . . . . . . . . 118 6.1 Limited fault tolerance (FRU_FLT.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 6.2 Failure with preservation of secure state (FPT_FLS.1) . . . . . . . . . . . . . .118 6.3 Limited capabilities (FMT_LIM.1) / Test, Limited capabilities (FMT_LIM.1) / Sdiag, Limited capabilities (FMT_LIM.1) / Loader, Limited availability (FMT_LIM.2) / Test, Limited availability (FMT_LIM.2) / Sdiag & Limited availability (FMT_LIM.2) / Loader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 ST31G480 E01 platform Security Target for composition Contents SMD_ST31G480_ST_18_002 7/144 6.4 Inter-TSF trusted channel (FTP_ITC.1) / Sdiag . . . . . . . . . . . . . . . . . . . .119 6.5 Audit review (FAU_SAR.1) / Sdiag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 6.6 Stored data confidentiality (FDP_SDC.1) . . . . . . . . . . . . . . . . . . . . . . . . .119 6.7 Stored data integrity monitoring and action (FDP_SDI.2) . . . . . . . . . . . .119 6.8 Audit storage (FAU_SAS.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 6.9 Resistance to physical attack (FPT_PHP.3) . . . . . . . . . . . . . . . . . . . . . . 120 6.10 Basic internal transfer protection (FDP_ITT.1), Basic internal TSF data transfer protection (FPT_ITT.1) & Subset information flow control (FDP_IFC.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 6.11 Random number generation (FCS_RNG.1) . . . . . . . . . . . . . . . . . . . . . . 120 6.12 Cryptographic operation: TDES operation (FCS_COP.1) / TDES . . . . . 120 6.13 Cryptographic operation: AES operation (FCS_COP.1) / AES . . . . . . . . 120 6.14 Cryptographic operation: RSA operation (FCS_COP.1) / RSA if NesLib only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 6.15 Cryptographic operation: Elliptic Curves Cryptography operation (FCS_COP.1) / ECC if NesLib only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 6.16 Cryptographic operation: SHA-1 & SHA-2 operation (FCS_COP.1) / SHA, if NesLib only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 6.17 Cryptographic operation: Keccak & SHA-3 operation (FCS_COP.1) / Keccak, if NesLib only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 6.18 Cryptographic operation: Keccak-p operation (FCS_COP.1) / Keccak-p, if NesLib only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 6.19 Cryptographic operation: Diffie-Hellman operation (FCS_COP.1) / Diffie- Hellman, if NesLib only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 6.20 Cryptographic operation: DRBG operation (FCS_COP.1) / DRBG, if NesLib only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 6.21 Cryptographic key generation: Prime generation (FCS_CKM.1) / Prime_generation, if NesLib only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 6.22 Cryptographic key generation: RSA key generation (FCS_CKM.1) / RSA_key_generation, if NesLib only . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 6.23 Static attribute initialisation (FMT_MSA.3) / Memories . . . . . . . . . . . . . . 124 6.24 Management of security attributes (FMT_MSA.1) / Memories & Specification of management functions (FMT_SMF.1) / Memories . . . . . . . . . . . . . . . 124 6.25 Complete access control (FDP_ACC.2) / Memories & Security attribute based access control (FDP_ACF.1) / Memories . . . . . . . . . . . . . . . . . . 124 6.26 Authentication Proof of Identity (FIA_API.1) . . . . . . . . . . . . . . . . . . . . . . 124 Contents ST31G480 E01 platform Security Target for composition 8/144 SMD_ST31G480_ST_18_002 6.27 Inter-TSF trusted channel (FTP_ITC.1) / Loader, Basic data exchange confidentiality (FDP_UCT.1) / Loader, Data exchange integrity (FDP_UIT.1) / Loader & Audit storage (FAU_SAS.1) / Loader . . . . . . . . . . . . . . . . . . . 124 6.28 Subset access control (FDP_ACC.1) / Loader & Security attribute based access control (FDP_ACF.1) / Loader . . . . . . . . . . . . . . . . . . . . . . . . . . 125 6.29 Failure with preservation of secure state (FPT_FLS.1) / Loader . . . . . . 125 6.30 Static attribute initialisation (FMT_MSA.3) / Loader . . . . . . . . . . . . . . . . 125 6.31 Management of security attributes (FMT_MSA.1) / Loader & Specification of management functions (FMT_SMF.1) / Loader . . . . . . . . . . . . . . . . . . . 125 6.32 Security roles (FMT_SMR.1) / Loader . . . . . . . . . . . . . . . . . . . . . . . . . . 125 6.33 Timing of identification (FIA_UID.1) / Loader & Timing of authentication (FIA_UAU.1) / Loader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 6.34 Audit review (FAU_SAR.1) / Loader . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 6.35 Security roles (FMT_SMR.1) / MFPlus . . . . . . . . . . . . . . . . . . . . . . . . . . 126 6.36 Subset access control (FDP_ACC.1) / MFPlus . . . . . . . . . . . . . . . . . . . 126 6.37 Security attribute based access control (FDP_ACF.1) / MFPlus . . . . . . 126 6.38 Static attribute initialisation (FMT_MSA.3) / MFPlus . . . . . . . . . . . . . . . . . . 127 6.39 Management of security attributes (FMT_MSA.1) / MFPlus . . . . . . . . . 127 6.40 Specification of Management Functions (FMT_SMF.1) / MFPlus . . . . . 127 6.41 Import of user data with security attributes (FDP_ITC.2) / MFPlus . . . . 127 6.42 Inter-TSF basic TSF data consistency (FPT_TDC.1) / MFPlus . . . . . . . 127 6.43 Cryptographic key destruction (FCS_CKM.4) / MFPlus . . . . . . . . . . . . . 127 6.44 User identification before any action (FIA_UID.2) / MFPlus . . . . . . . . . . 127 6.45 User authentication before any action (FIA_UAU.2) / MFPlus . . . . . . . . 127 6.46 Multiple authentication mechanisms (FIA_UAU.5) / MFPlus . . . . . . . . . 128 6.47 Management of TSF data (FMT_MTD.1) / MFPlus . . . . . . . . . . . . . . . . . . 128 6.48 Trusted path (FTP_TRP.1) / MFPlus . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 6.49 Replay detection (FPT_RPL.1) / MFPlus . . . . . . . . . . . . . . . . . . . . . . . . 128 6.50 Unlinkability (FPR_UNL.1) / MFPlus . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 6.51 Minimum and maximum quotas (FRU_RSA.2) / MFPlus . . . . . . . . . . . . 128 6.52 Subset residual information protection (FDP_RIP.1) / MFPlus . . . . . . . . 128 6.53 Security roles (FMT_SMR.1) / DESFire . . . . . . . . . . . . . . . . . . . . . . . . . 128 6.54 Subset access control (FDP_ACC.1) / DESFire . . . . . . . . . . . . . . . . . . 129 6.55 Security attribute based access control (FDP_ACF.1) / DESFire . . . . . . 129 6.56 Static attribute initialisation (FMT_MSA.3) / DESFire . . . . . . . . . . . . . . . . . 129 ST31G480 E01 platform Security Target for composition Contents SMD_ST31G480_ST_18_002 9/144 6.57 Management of security attributes (FMT_MSA.1) / DESFire . . . . . . . . . 129 6.58 Specification of Management Functions (FMT_SMF.1) / DESFire . . . . . 129 6.59 Import of user data with security attributes (FDP_ITC.2) / DESFire . . . . 129 6.60 Inter-TSF basic TSF data consistency (FPT_TDC.1) / DESFire . . . . . . 129 6.61 Cryptographic key destruction (FCS_CKM.4) / DESFire . . . . . . . . . . . . 129 6.62 User identification before any action (FIA_UID.2) / DESFire . . . . . . . . . 130 6.63 User authentication before any action (FIA_UAU.2) / DESFire . . . . . . . 130 6.64 Multiple authentication mechanisms (FIA_UAU.5) / DESFire . . . . . . . . 130 6.65 Management of TSF data (FMT_MTD.1) / DESFire . . . . . . . . . . . . . . . . . 130 6.66 Trusted path (FTP_TRP.1) / DESFire . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 6.67 Basic rollback (FDP_ROL.1) / DESFire . . . . . . . . . . . . . . . . . . . . . . . . . 130 6.68 Replay detection (FPT_RPL.1) / DESFire . . . . . . . . . . . . . . . . . . . . . . . 130 6.69 Unlinkability (FPR_UNL.1) / DESFire . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 6.70 Minimum and maximum quotas (FRU_RSA.2) / DESFire . . . . . . . . . . . 131 6.71 Subset residual information protection (FDP_RIP.1) / DESFire . . . . . . . 131 6.72 Subset access control (FDP_ACC.1) / APPLI_FWL & Security attribute based access control (FDP_ACF.1) / APPLI_FWL . . . . . . . . . . . . . . . . 131 6.73 Static attribute initialisation (FMT_MSA.3) / APPLI_FWL . . . . . . . . . . . . . 131 7 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 8 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Appendix A Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 A.1 Terms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 A.2 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 List of tables ST31G480 E01 platform Security Target for composition 10/144 SMD_ST31G480_ST_18_002 List of tables Table 1. TOE components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Table 2. Derivative devices configuration possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Table 3. Composite product life cycle phases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Table 4. Summary of security aspects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Table 5. Summary of security objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Table 6. Security Objectives versus Assumptions, Threats or Policies . . . . . . . . . . . . . . . . . . . . . . 47 Table 7. Summary of functional security requirements for the TOE . . . . . . . . . . . . . . . . . . . . . . . . . 59 Table 8. FCS_COP.1 iterations (cryptographic operations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Table 9. FCS_CKM.1 iterations (cryptographic key generation). . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Table 10. TOE security assurance requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Table 11. Impact of EAL5 selection on BSI-CC-PP-0084-2014 refinements . . . . . . . . . . . . . . . . . . . 90 Table 12. Security Requirements versus Security Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Table 13. Dependencies of security functional requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Table 14. TOE components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Table 15. Guidance documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Table 16. Sites list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Table 17. Common Criteria. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Table 18. Protection Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Table 19. Other standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Table 20. List of abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Table 21. Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 ST31G480 E01 platform Security Target for composition List of figures SMD_ST31G480_ST_18_002 11/144 List of figures Figure 1. ST31G480 E01 platform block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ST31G480 E01 platform Security Target for composition 12/144 SMD_ST31G480_ST_18_002 1.3 Context 7 The Target of Evaluation (TOE) referred to in Section 1.4: TOE identification, is evaluated under the French IT Security Evaluation and Certification Scheme and is developed by the Secure Microcontrollers Division of STMicroelectronics (ST). 8 The assurance level of the performed Common Criteria (CC) IT Security Evaluation is EAL5 augmented by ADV_IMP.2, ADV_TDS.5, ALC_CMC.5, ALC_DVS.2, ALC_FLR.1, ALC_TAT.3, ASE_TSS.2 and AVA_VAN.5. 9 The intent of this Security Target is to specify the Security Functional Requirements (SFRs) and Security Assurance Requirements (SARs) applicable to the TOE security ICs, and to summarise their chosen TSF services and assurance measures. 10 This ST claims to be an instantiation of the "Eurosmart - Security IC Platform Protection Profile with Augmentation Packages" (PP) registered and certified under the reference BSI- CC-PP-0084-2014 in the German IT Security Evaluation and Certification Scheme, with the following augmentations: • Addition #1: “Support of Cipher Schemes” from AUG • Addition #4: “Area based Memory Access Control” from AUG • Additions specific to this Security Target, some of which in compliance with ANSSI-CC- NOTE-06/2.0 EN and ANSSI-CC-CER/F/06.002. The original text of this PP is typeset as indicated here, its augmentations from AUG as indicated here, and text originating in ANSSI-CC-NOTE-06/2.0 EN and ANSSI-CC- CER/F/06.002 as indicated here, when they are reproduced in this document. This ST instantiates the following packages from the above mentioned PP: • Authentication of the Security IC • Loader dedicated for usage in secured environment only • Loader dedicated for usage by authorized users only. 11 Extensions introduced in this ST to the SFRs of the Protection Profile (PP) are exclusively drawn from the Common Criteria part 2 standard SFRs. 12 This ST makes various refinements to the above mentioned PP and AUG. They are all properly identified in the text typeset as indicated here or here. The original text of the PP is repeated as scarcely as possible in this document for reading convenience. All PP identifiers have been however prefixed by their respective origin label: BSI for BSI-CC-PP- 0084-2014, AUG1 for Addition #1 of AUG, AUG4 for Addition #4 of AUG., and ANSSI for ANSSI-CC-NOTE-06/2.0 EN and ANSSI-CC-CER/F/06.002. 1.4 TOE identification 13 The Target of Evaluation (TOE) is the ST31G480 E01 platform. 14 “ST31G480 E01” completely identifies the TOE including its components listed in Table 1: TOE components, its guidance documentation detailed in Table 15: Guidance documentation, and its development and production sites indicated in Table 16: Sites list. 15 E01 is the version of the evaluated platform. Any change in the TOE components, the guidance documentation and the list of sites leads to a new version of the evaluated platform, thus a new TOE. ST31G480 E01 platform Security Target for composition SMD_ST31G480_ST_18_002 13/144 16 The IC maskset name is the product hardware identification. The IC version is updated for any change in hardware (i.e. part of the layers of the maskset) or in the OST software. 17 All along the product life, the marking on the die, a set of accessible registers and a set of specific instructions allow the customer to check the product information, providing the identification elements, as listed in Table 1: TOE components, and the configuration elements as detailed in the Data Sheet, referenced in Table 15: Guidance documentation. 18 In this Security Target, the term "DESFire" means MIFARE® DESFire® EV1 4.8.12. 19 In this Security Target, the term "MFPlus" means MIFARE Plus® X 2.4.6. 1.5 TOE overview 20 Designed for secure ID and banking applications, the TOE is a serial access microcontroller that incorporates the most recent generation of ARM® processors for embedded secure systems. Its SecurCore® SC000™ 32-bit RISC core is built on the Cortex™ M0 core with additional security features to help to protect against advanced forms of attacks. 21 Different derivative devices may be configured depending on the customer needs: • either by ST during the manufacturing or packaging process, • or by the customer during the packaging, or composite product integration, or personnalisation process. 22 They all share the same hardware design and the same maskset (denoted by the Master identification number). The Master identification number is unique for all product configurations. 23 The configuration of the derivative devices can impact the I/O mode, the available NVM size, the availability of Nescrypt and the availability of MIFARE support features, as detailed here below: Table 1. TOE components IC Maskset name IC version Master identification number (1) Firmware version OST version Optional NesLib crypto library version Optional MIFARE DESFire EV1 version Optional MIFARE Plus X version K8L0B J 00B8h 3.0.1 3.4 6.2.1 4.8.12 2.4.6 1. Part of the product information. Table 2. Derivative devices configuration possibilities Features Possible values I/O mode Contact only, Dual mode, Contactless only NVM size 128, 192, 256, 320, 384, 448 or 480 Kbytes Nescrypt Active, Inactive ST31G480 E01 platform Security Target for composition 14/144 SMD_ST31G480_ST_18_002 24 All combinations of different features values are possible and covered by this certification. All possible configurations can vary under a unique IC, and without impact on security. 25 The Master identification number is unique for all product configurations. Each derivative device has a specific Child product identification number, also part of the product information, and specified in the Data Sheet and in the Firmware User Manual, referenced in Table 15. 26 The rest of this document applies to all possible configurations of the TOE, with or without NesLib, or MIFARE libraries, except when a restriction is mentioned. For easier reading, the restrictions are typeset as indicated here. 27 In a few words, the ST31G480 E01 offers a unique combination of high performances and very powerful features for high level security: • Die integrity, • Monitoring of environmental parameters, • Protection mechanisms against faults, • AIS20/AIS31 class PTG.2 compliant True Random Number Generator, • Hardware Security Enhanced DES accelerator, • Hardware Security AES accelerator, • ISO 3309 CRC calculation block, • Memory Protection Unit, • optional NExt Step CRYPTography accelerator (NESCRYPT), • optional cryptographic library, • optional MIFARE support, • optional secure MIFARE® DESFire® EV1 library, • optional secure MIFARE Plus® X library. 1.6 TOE description 1.6.1 TOE hardware description 28 The TOE features hardware accelerators for advanced cryptographic functions, with built-in countermeasures against side channel attacks. The AES (Advanced Encryption Standard [6]) accelerator provides a high-performance implementation of AES-128, AES-192 and AES-256 algorithms. It can operate in Electronic CodeBook (ECB) or Cipher Block Chaining (CBC) modes. The 3-key triple DES accelerator (EDES+) supports efficiently the Triple Data Encryption Standard (TDES [2]), enabling Electronic Code Book (ECB) and Cipher Block Chaining (CBC) modes and triple DES computation. If Nescrypt is active, the NESCRYPT crypto-processor allows fast and secure MIFARE support (Crypto1 + LPU) Active, Inactive Capacitor 20pF, 68pF, 168pF Table 2. Derivative devices configuration possibilities (continued) Features Possible values ST31G480 E01 platform Security Target for composition SMD_ST31G480_ST_18_002 15/144 implementation of the most popular public key cryptosystems with a high level of performance ([7], [9], [12],[13], [14], [15]). 29 The TOE offers 12 Kbytes of User RAM and up to 480 Kbytes of secure User high-density Flash memory (NVM). 30 As randomness is a key stone in many applications, the ST31G480 E01 features a highly reliable True Random Number Generator (TRNG), compliant with PTG.2 Class of AIS20/AIS31 [1] and directly accessible thru dedicated registers. 31 This device also includes the ARM® SecurCore® SC000™ memory protection unit (MPU), which enables the user to define its own region organization with specific protection and access permissions. 32 The TOE offers a contact serial communication interface fully compatible with the ISO/IEC 7816-3 standard, and a contactless interface including an RF Universal Asynchronous Receiver Transmitter (RF UART), enabling communication up to 848 Kbits/s compatible with the ISO/IEC 14443 Type A, B and B’, PayPass™ and ISO/IEC 18092 passive mode standards. These interfaces can be used simultaneously (dual mode), or the contact interface can be deactivated (see Table 2: Derivative devices configuration possibilities). 33 The detailed features of this TOE are described in the Data Sheet and in the Cortex SC000 Technical Reference Manual, referenced in Table 15. 34 Figure 1 provides an overview of the ST31G480 E01 platform. Figure 1. ST31G480 E01 platform block diagram ST31G480 E01 platform Security Target for composition 16/144 SMD_ST31G480_ST_18_002 1.6.2 TOE software description 35 The OST ROM contains a Dedicated Software which provides full test capabilities (operating system for test, called "OST"), not accessible by the Security IC Embedded Software (ES), after TOE delivery. 36 The System ROM and ST NVM of the TOE contain a Dedicated Software (Firmware) which provides: • a Secure Flash Loader, enabling to securely and efficiently download the Security IC Embedded Software (ES) into the NVM. It also allows the evaluator to load software into the TOE for test purpose. The Secure Flash Loader is available in Admin configuration. The customer can choose to activate it in any phase of the product life- cycle under highly secured conditions, or to deactivate it definitely at a certain step. • low-level functions called Flash Drivers, enabling the Security IC Embedded Software (ES) to modify and manage the NVM contents. The Flash Drivers are available in User configuration. • a set of protected commands for device testing and product profiling, not intended for the Security IC Embedded Software (ES) usage, and not available in User configuration. • a very reduced set of uncritical commands for basic diagnostic purpose (field return analysis), only reserved to STMicroelectronics. • a set of highly protected commands for secure diagnostic purpose (advanced quality investigations), that can only be activated by the customer and be operated by STMicroelectronics on its own audited sites. This feature is protected by specific strong access control, completed by environmental measures which prevent access to customer assets. Furthermore, it can be permanently deactivated by the customer. 37 The TOE optionally comprises a specific application in User NVM: this applicative Embedded Software is a cryptographic library called NesLib. NesLib is a cutting edge cryptographic library in terms of security and performance. NesLib is embedded by the ES developer in his applicative code. Note that the NesLib RSA, ECC and Diffie-Hellman functions can only be used if Nescrypt is active. NesLib is a cryptographic toolbox supporting the most common standards and protocols: • an asymmetric key cryptographic support module, supporting secure modular arithmetic with large integers, with specialized functions for Rivest, Shamir & Adleman Standard cryptographic algorithm (RSA [14]), and Diffie-Hellman [23], • an asymmetric key cryptographic support module that provides very efficient basic functions to build up protocols using Elliptic Curves Cryptography on prime fields GF(p) ST31G480 E01 platform Security Target for composition SMD_ST31G480_ST_18_002 17/144 with elliptic curves in short Weierstrass form [12], and provides support for ECDH key agreement [21] and ECDSA generation and verification [5]. • a module for supporting elliptic curve cryptography on Edwards curve 25519, in particular ed25519 signature generation, verification and point decompression [26]. • a cryptographic support module that provides secure hash functions (SHA-1(a) , SHA-2 [4], Keccak and a toolbox for cryptography based on Keccak-p, the permutation underlying SHA-3 [25]), • a symmetric key cryptographic support module whose base algorithm is the Data Encryption Standard cryptographic algorithm (DES) [2], • a symmetric key cryptographic support module whose base algorithm is the Advanced Encryption Standard cryptographic algorithm (AES) [6], • support for Deterministic Random Bit Generators [19], • prime number generation and RSA key pairs generation [3]. 38 The TOE optionally comprises a specific application in User NVM: this applicative Embedded Software is a MIFARE technology library. This library may be a secure library called MIFARE® DESFire® EV1. DESFire features a mutual three pass authentication, a data encryption on RF channel, and a flexible self- securing file system. This library may be a secure library called MIFARE Plus® X. MFPlus features AES authentication, data encryption on RF channel, potential for multiple instances of the file system consisting of 16byte blocks arranged into sectors with each sector having its own access control keys and conditions. Note that MIFARE Plus® S is a sub-configuration of MIFARE Plus® X, and is evaluated as such. DESFire or MFPlus is embedded on the TOE by ST. DESFire and MFPlus do not coexist on the TOE. Note that DESFire and MFPlus can only be used if MIFARE support is active. 39 In MFPlus, the card is in one (of in total four) security levels. The main features of each security level are listed below: • Security level 0: The card does not provide any functionality besides initialization. The card is initialized in plaintext, especially keys for the further levels can be brought in. A card in security level 0 is not usable for other purposes. After all mandatory keys and security attributes have been stored in the card, it can be switched to security level 1. • Security level 1: The card user can access the blocks in the card after an authentication procedure. The communication with the terminal is protected, however the authentication and the protected communication in the security level are not evaluated security services of the TOE. It can be switched to security level 3 if an authentication using the AES algorithm with the necessary key is performed. • Security level 2: The card user can access the blocks in the card after an authentication procedure involving an authentication using the AES algorithm and an authentication using a proprietary algorithm. The communication with the terminal is protected, however both authentications and the protected communication in this security level are not evaluated security services of the TOE. The TOE can be switched to security a. Note that SHA-1 is no longer recommended as a cryptographic function. Hence, Security IC Embedded Software may need to use another SHA to achieve a suitable strength. ST31G480 E01 platform Security Target for composition 18/144 SMD_ST31G480_ST_18_002 level 3 if an authentication using the AES algorithm with the necessary key is performed. • Security level 3: The card user can access the data blocks in the card via an adequate card terminal after an authentication procedure based on the AES algorithm. The communication with the card terminal can be protected by using a message authentication code (MAC). The authentication and the MAC are security services of the TOE. The TOE cannot be switched to a different security level. 40 The Security levels 0, 1 and 2 are outside the scope of this evaluation. Thus, MFPlus must be in Security level 3 on the field (Phase 7). In all security levels, the TOE does additionally support the so-called originality function which allows verifying the authenticity of the TOE. 41 In MFPlus, the TOE supports the virtual card architecture by providing a selection mechanism for virtual cards. This allows using the TOE in a complex environment where multiple virtual cards are stored in one physical object, however the TOE does support only one virtual card. 42 The Security IC Embedded Software (ES) is in User NVM. Note: The ES is not part of the TOE and is out of scope of the evaluation, except NesLib, MIFARE DESFire EV1, and MIFARE Plus X when they are embedded. 1.6.3 TOE documentation 43 The user guidance documentation, part of the TOE, consists of: • the product Data Sheet and die description, • the product family Security Guidance, • the AIS31 user manuals, • the product family programming manual, • the ARM SC000 Technical Reference Manual, • the Firmware user manual, • optionally the NesLib user manual, • optionally the MIFARE DESFire EV1 user manual, • optionally the MIFARE Plus X user manual. 44 The complete list of guidance documents is detailed in Table 15. 1.7 TOE life cycle 45 This Security Target is fully conform to the claimed PP. In the following, just a summary and some useful explanations are given. For complete details on the TOE life cycle, please refer to the Eurosmart - Security IC Platform Protection Profile with Augmentation Packages (BSI-CC-PP-0084-2014), section 1.2.3. 46 The composite product life cycle is decomposed into 7 phases. Each of these phases has the very same boundaries as those defined in the claimed protection profile. 47 The life cycle phases are summarized in Table 3. 48 The sites potentially involved in the TOE life cycle are listed in Table 16. ST31G480 E01 platform Security Target for composition SMD_ST31G480_ST_18_002 19/144 49 The limit of the evaluation corresponds to phases 2, 3 and optionally 4, including the delivery and verification procedures of phase 1, and the TOE delivery either to the IC packaging manufacturer or to the composite product integrator ; procedures corresponding to phases 1, 5, 6 and 7 are outside the scope of this evaluation. 50 In the following, the term "Composite product manufacturing" is uniquely used to indicate phases 1, optionally 4, 5 and 6 all together. This ST also uses the term "Composite product manufacturer" which includes all roles responsible of the TOE during phases 1, optionally 4, 5 and 6. 51 The TOE is delivered after Phase 3 in form of wafers or after Phase 4 in packaged form, depending on the customer’s order. 52 In the following, the term "TOE delivery" is uniquely used to indicate: • after Phase 3 (or before Phase 4) if the TOE is delivered in form of wafers or sawn wafers (dice) or • after Phase 4 (or before Phase 5) if the TOE is delivered in form of packaged products. 53 The TOE is delivered in Admin (aka Issuer) or User configuration. 1.8 TOE environment 54 Considering the TOE, three types of environments are defined: • Development environment corresponding to phase 2, • Production environment corresponding to phase 3 and optionally 4, • Operational environment, including phase 1 and from phase 4 or 5 to phase 7. Table 3. Composite product life cycle phases Phase Name Description 1 Security IC embedded software development security IC embedded software development specification of IC pre-personalization requirements 2 IC development IC design IC dedicated software development 3 IC manufacturing and testing integration and photomask fabrication IC manufacturing IC testing IC pre-personalisation 4 IC packaging security IC packaging (and testing) pre-personalisation if necessary 5 Security IC product finishing process composite product finishing process composite product testing 6 Security IC personalisation composite product personalisation composite product testing 7 Security IC end usage composite product usage by its issuers and consumers ST31G480 E01 platform Security Target for composition 20/144 SMD_ST31G480_ST_18_002 1.8.1 TOE Development Environment (Phase 2) 55 To ensure security, the environment in which the development takes place is secured with controllable accesses having traceability. Furthermore, all authorised personnel involved fully understand the importance and the strict implementation of defined security procedures. 56 The development begins with the TOE's specification. All parties in contact with sensitive information are required to abide by Non-Disclosure Agreements. 57 Design and development of the IC then follows, together with the dedicated and engineering software and tools development. The engineers use secure computer systems (preventing unauthorised access) to make their developments, simulations, verifications and generation of the TOE's databases. Sensitive documents, files and tools, databases on tapes, and printed circuit layout information are stored in appropriate locked cupboards/safe. Of paramount importance also is the disposal of unwanted data (complete electronic erasures) and documents (e.g. shredding). 58 The development centres possibly involved in the development of the TOE are denoted by the activity “DEV” in Table 16. 59 Reticules and photomasks are generated from the verified IC databases; the former are used in the silicon Wafer-fab processing. As reticules and photomasks are generated off- site, they are transported and worked on in a secure environment. During the transfer of sensitive data electronically, procedures are established to ensure that the data arrive only at the destination and are not accessible at intermediate stages (e.g. stored on a buffer server where system administrators make backup copies). 60 The authorized sub-contractors potentially involved in the TOE mask manufacturing are denoted by the activity “MASK” in Table 16. 1.8.2 TOE production environment 61 As high volumes of product commonly go through such environments, adequate control procedures are necessary to account for all product at all stages of production. Phase 3 62 Production starts within the Wafer-fab; here the silicon wafers undergo the diffusion processing. Computer tracking at wafer level throughout the process is commonplace. The wafers are then taken into the test area. Testing of each TOE occurs to assure conformance with the device specification. 63 The authorized front-end plant possibly involved in the manufacturing of the TOE are denoted by the activity “FE” in Table 16. 64 The authorized EWS plant potentially involved in the testing of the TOE are denoted by the activity “EWS” in Table 16. 65 Wafers are then scribed and broken such as to separate the functional from the non- functional ICs. The latter is discarded in a controlled accountable manner. Phase 4 66 The good ICs are then packaged in phase 4, in a back-end plant. When testing, programming or deliveries are done offsite, ICs are transported and worked on in a secure environment with accountability and traceability of all (good and bad) products. ST31G480 E01 platform Security Target for composition SMD_ST31G480_ST_18_002 21/144 67 When the product is delivered after phase 4, the authorized back-end plants possibly involved in the packaging of the TOE are denoted by the activity “BE” in Table 16. 68 All sites denoted by the activity “WHS” in Table 16 can be involved for the logistics during phase 3 or 4. 1.8.3 TOE operational environment 69 A TOE operational environment is the environment of phases 1, optionally 4, then 5 to 7. 70 At phases 1, 4, 5 and 6, the TOE operational environment is a controlled environment. 71 End-user environments (phase 7): composite products are used in a wide range of applications to assure authorised conditional access. Examples of such are pay-TV, banking cards, brand protection, portable communication SIM cards, health cards, transportation cards, access management, identity and passport cards. The end-user environment therefore covers a wide range of very different functions, thus making it difficult to avoid and monitor any abuse of the TOE. Conformance claims (ASE_CCL, ASE_ECD) ST31G480 E01 platform Security Target for composi- 22/144 SMD_ST31G480_ST_18_002 2 Conformance claims (ASE_CCL, ASE_ECD) 2.1 Common Criteria conformance claims 72 The ST31G480 E01 platform Security Target claims to be conformant to the Common Criteria version 3.1 revision 5. 73 Furthermore it claims to be CC Part 2 (CCMB-2017-04-002 R5) extended and CC Part 3 (CCMB-2017-04-003 R5) conformant. 74 The extended Security Functional Requirements are those defined in the Eurosmart - Security IC Platform Protection Profile with Augmentation Packages (BSI-CC-PP-0084- 2014): • FCS_RNG Generation of random numbers, • FMT_LIM Limited capabilities and availability, • FAU_SAS Audit data storage, • FDP_SDC Stored data confidentiality, • FIA_API Authentication proof of identity. The reader can find their certified definitions in the text of the "BSI-CC-PP-0084-2014" Protection Profile. 75 The assurance level for the ST31G480 E01 platform Security Target is EAL5 augmented by ADV_IMP.2, ADV_TDS.5, ALC_CMC.5, ALC_DVS.2, ALC_FLR.1, ALC_TAT.3, ASE_TSS.2 and AVA_VAN.5. 2.2 PP Claims 2.2.1 PP Reference 76 The ST31G480 E01 platform Security Target claims strict conformance to the Eurosmart - Security IC Platform Protection Profile with Augmentation Packages (BSI-CC-PP-0084- 2014), for the part of the TOE covered by this PP (Security IC), as required by this Protection Profile. 77 The following packages have been selected from the BSI-CC-PP-0084-2014: • Package “Authentication of the Security IC”, • Packages for Loader: – Package 1: Loader dedicated for usage in Secured Environment only, – Package 2: Loader dedicated for usage by authorized users only. ST31G480 E01 platform Security Target for composition Conformance claims (ASE_CCL, ASE_- SMD_ST31G480_ST_18_002 23/144 2.2.2 PP Additions 78 The main additions operated on the BSI-CC-PP-0084-2014 are: • Addition #4: “Area based Memory Access Control” from AUG, • Addition #1: “Support of Cipher Schemes” from AUG, • Specific additions for the Secure Flash Loader, to comply with ANSSI-CC-NOTE-06/2.0 EN and ANSSI-CC-CER/F/06.002, • Specific additions for the Secure Diagnostic capability, • Specific additions for DESFire and MFPlus, • Refinement of assurance requirements. 79 All refinements are indicated with type setting text as indicated here, original text from the BSI-CC-PP-0084-2014 being typeset as indicated here and here. Text originating in AUG is typeset as indicated here. Text originating in ANSSI-CC-NOTE-06/2.0 EN and ANSSI-CC- CER/F/06.002 is typeset as indicated here. 80 The security environment additions relative to the PP are summarized in Table 4. 81 The additional security objectives relative to the PP are summarized in Table 5. 82 A simplified presentation of the TOE Security Policy (TSP) is added. 83 The additional SFRs for the TOE relative to the PP are summarized in Table 7. 84 The additional SARs relative to the PP are summarized in Table 10. 2.2.3 PP Claims rationale 85 The differences between this Security Target security objectives and requirements and those of BSI-CC-PP-0084-2014, to which conformance is claimed, have been identified and justified in Section 4 and in Section 5. They have been recalled in the previous section. 86 In the following, the statements of the security problem definition, the security objectives, and the security requirements are consistent with those of the BSI-CC-PP-0084-2014. 87 The security problem definition presented in Section 3, clearly shows the additions to the security problem statement of the PP. 88 The security objectives rationale presented in Section 4.3 clearly identifies modifications and additions made to the rationale presented in the BSI-CC-PP-0084-2014. 89 Similarly, the security requirements rationale presented in Section 5.4 has been updated with respect to the protection profile. 90 All PP requirements have been shown to be satisfied in the extended set of requirements whose completeness, consistency and soundness have been argued in the rationale sections of the present document. Security problem definition (ASE_SPD) ST31G480 E01 platform Security Target for composition 24/144 SMD_ST31G480_ST_18_002 3 Security problem definition (ASE_SPD) 91 This section describes the security aspects of the environment in which the TOE is intended to be used and addresses the description of the assets to be protected, the threats, the organisational security policies and the assumptions. 92 Note that the origin of each security aspect is clearly identified in the prefix of its label. Most of these security aspects can therefore be easily found in the Eurosmart - Security IC Platform Protection Profile with Augmentation Packages (BSI-CC-PP-0084-2014), section 3. Only those originating in AUG or in ANSSI-CC-NOTE-06/2.0 EN / ANSSI-CC- CER/F/06.002, and the ones introduced in this Security Target, are detailed in the following sections. 93 A summary of all these security aspects and their respective conditions is provided in Table 4. ST31G480 E01 platform Security Target for composition Security problem definition (ASE_SPD) SMD_ST31G480_ST_18_002 25/144 Table 4. Summary of security aspects Label Title TOE threats BSI.T.Leak-Inherent Inherent Information Leakage BSI.T.Phys-Probing Physical Probing BSI.T.Malfunction Malfunction due to Environmental Stress BSI.T.Phys-Manipulation Physical Manipulation BSI.T.Leak-Forced Forced Information Leakage BSI.T.Abuse-Func Abuse of Functionality BSI.T.RND Deficiency of Random Numbers BSI.T.Masquerade-TOE Masquerade the TOE AUG4.T.Mem-Access Memory Access Violation ANSSI.T.Open-Samples-Diffusion Diffusion of open samples T.Data-Modification-MFPlus Unauthorised data modification for MFPlus T.Impersonate-MFPlus Impersonating authorised users during authentication for MFPlus T.Cloning-MFPlus Cloning for MFPlus T.Confid-Applic-Code-MFPlus MFPlus code confidentiality T.Confid-Applic-Data-MFPlus MFPlus data confidentiality T.Integ-Applic-Code-MFPlus MFPlus code integrity T.Integ-Applic-Data-MFPlus MFPlus data integrity T.Application-Resource-MFPlus MFPlus resource unavailability T.Data-Modification-DESFire Unauthorised data modification for DESFire T.Impersonate-DESFire Impersonating authorised users during authentication for DESFire T.Cloning-DESFire Cloning for DESFire T.Confid-Applic-Code-DESFire DESFire code confidentiality T.Confid-Applic-Data-DESFire DESFire data confidentiality T.Integ-Applic-Code-DESFire DESFire code integrity T.Integ-Applic-Data-DESFire DESFire data integrity T.Resource-DESFire DESFire resource unavailability Security problem definition (ASE_SPD) ST31G480 E01 platform Security Target for composition 26/144 SMD_ST31G480_ST_18_002 3.1 Description of assets 94 Since this Security Target claims strict conformance to the Eurosmart - Security IC Platform Protection Profile with Augmentation Packages (BSI-CC-PP-0084-2014), the assets defined in section 3.1 of the Protection Profile are applied and the assets regarding threats are clarified in this Security Target. OSPs BSI.P.Process-TOE Protection during TOE Development and Production BSI.P.Lim-Block-Loader Limiting and blocking the loader functionality BSI.P.Ctrl-Loader Controlled usage to Loader Functionality AUG1.P.Add-Functions Additional Specific Security Functionality (Cipher Scheme Support) P.Encryption Confidentiality during communication for MFPlus P.MAC Integrity during communication for MFPlus P.No-Trace-MFPlus Un-traceability of end-users for MFPlus P.Confidentiality Confidentiality during communication for DESFire P.Transaction Transaction mechanism for DESFire P.No-Trace-DESFire Un-traceability of end-users for DESFire P.Resp-Appl Treatment of user data Assumptions BSI.A.Process-Sec-IC Protection during Packaging, Finishing and Personalisation BSI.A.Resp-Appl Treatment of User Data A.Secure-Values-MFPlus Usage of secure values for MFPlus A.Terminal-Support-MFPlus Terminal support to ensure integrity and confidentiality for MFPlus A.Secure-Values-DESFire Usage of secure values for DESFire A.Terminal-Support-DESFire Terminal support to ensure integrity and confidentiality for DESFire Table 4. Summary of security aspects (continued) Label Title ST31G480 E01 platform Security Target for composition Security problem definition (ASE_SPD) SMD_ST31G480_ST_18_002 27/144 95 The assets regarding the threats are: • logical design data, physical design data, IC Dedicated Software, and configuration data, • Initialisation data and pre-personalisation data, specific development aids, test and characterisation related data, material for software development support, and photomasks and product in any form, • the TOE correct operation, • the Security IC Embedded Software, stored in the TOE’s protected memories and in operation, • the security services provided by the TOE for the Security IC Embedded Software, • the cryptographic co-processors for Triple-DES and AES, the random number generator, • when DESFire is embedded, the special functions for the communication with an external interface device, • the User Data comprising, especially when DESFire is embedded, – authentication data like keys, – issuer data like card holder name or processing options, – representation of monetary values, e.g. a stored value for transport applications, • the TSF Data. 96 This Security Target includes optionally Security IC Embedded Software and therefore does contain more assets compared to BSI-CC-PP-0084-2014. These assets are described above. 97 Application note: The TOE providing a functionality for Security IC Embedded Software secure loading into NVM, the ES is considered as User Data being stored in the TOE’s memories at this step, and the Protection Profile corresponding packages are integrated, as well as the requirements from ANSSI-CC-NOTE-06/2.0 EN. 3.2 Threats 98 The threats are described in the BSI-CC-PP-0084-2014, section 3.2. Only those originating in AUG, ANSSI-CC-CER/F/06.002, and those related to DESFire and MFPlus are detailed in the following section. BSI.T.Leak-Inherent Inherent Information Leakage BSI.T.Phys-Probing Physical Probing BSI.T.Malfunction Malfunction due to Environmental Stress BSI.T.Phys- Manipulation Physical Manipulation BSI.T.Leak-Forced Forced Information Leakage BSI.T.Abuse-Func Abuse of Functionality BSI.T.RND Deficiency of Random Numbers BSI.T.Masquerade-TOE Masquerade the TOE Security problem definition (ASE_SPD) ST31G480 E01 platform Security Target for composition 28/144 SMD_ST31G480_ST_18_002 99 The following additional threats are related to MFPlus. They are valid in case MFPlus is embedded in the TOE. AUG4.T.Mem-Access Memory Access Violation: Parts of the Security IC Embedded Software may cause security violations by accidentally or deliberately accessing restricted data (which may include code). Any restrictions are defined by the security policy of the specific application context and must be implemented by the Security IC Embedded Software. Clarification: This threat does not address the proper definition and management of the security rules implemented by the Security IC Embedded Software, this being a software design and correctness issue. This threat addresses the reliability of the abstract machine targeted by the software implementation. To avert the threat, the set of access rules provided by this TOE should be undefeated if operated according to the provided guidance. The threat is not realized if the Security IC Embedded Software is designed or implemented to grant access to restricted information. It is realized if an implemented access denial is granted under unexpected conditions or if the execution machinery does not effectively control a controlled access. Here the attacker is expected to (i) take advantage of flaws in the design and/or the implementation of the TOE memory access rules (refer to BSI.T.Abuse-Func but for functions available after TOE delivery), (ii) introduce flaws by forcing operational conditions (refer to BSI.T.Malfunction) and/or by physical manipulation (refer to BSI.T.Phys-Manipulation). This attacker is expected to have a high level potential of attack. ANSSI.T.Open- Samples-Diffusion Diffusion of open samples: An attacker may get access to open samples of the TOE and use them to gain information about the TSF (loader, memory management unit, ROM code, …). He may also use the open samples to characterize the behavior of the IC and its security functionalities (for example: characterization of side channel profiles, perturbation cartography, …). The execution of a dedicated security features (for example: execution of a DES computation without countermeasures or by de-activating countermeasures) through the loading of an adequate code would allow this kind of characterization and the execution of enhanced attacks on the IC. T.Data-Modification- MFPlus Unauthorised data modification for MFPlus: User data stored by the TOE may be modified by unauthorised subjects. This threat applies to the processing of modification commands received by the TOE, it is not concerned with verification of authenticity. T.Impersonate-MFPlus Impersonating authorised users during authentication for MFPlus: An unauthorised subject may try to impersonate an authorised subject during the authentication sequence, e.g. by a man-in-the middle or replay attack. ST31G480 E01 platform Security Target for composition Security problem definition (ASE_SPD) SMD_ST31G480_ST_18_002 29/144 100 The following additional threats are related to DESFire. They are valid in case DESFire is embedded in the TOE. T.Cloning-MFPlus Cloning for MFPlus: All data stored on the TOE (including keys) may be read out in order to create a duplicate. T.Confid-Applic-Code- MFPlus MFPlus code confidentiality: MIFARE Plus Licensed product code must be protected against unauthorized disclosure. This relates to attacks at runtime to gain read or compare access to memory area where the MIFARE Plus licensed product executable code is stored. The attacker executes an application to disclose code belonging to MIFARE Plus Licensed product. T.Confid-Applic-Data- MFPlus MFPlus data confidentiality: MIFARE Plus Licensed product data must be protected against unauthorized disclosure. This relates to attacks at runtime to gain read or compare access to the MIFARE Plus licensed product data by another application. For example, the attacker executes an application that tries to read data belonging to MIFARE Plus Licensed product. T.Integ-Applic-Code- MFPlus MFPlus code integrity: MIFARE Plus Licensed product code must be protected against unauthorized modification. This relates to attacks at runtime to gain write access to memory area where the MIFARE Plus licensed product executable code is stored and executed. The attacker executes an application that tries to alter (part of) the MIFARE Plus Licensed product code. T.Integ-Applic-Data- MFPlus MFPlus data integrity: MIFARE Plus Licensed product data must be protected against unauthorized modification. This relates to attacks at runtime to gain write access to the MIFARE Plus Licensed product data by another application. The attacker executes an application that tries to alter (part of) the MIFARE Plus Licensed product data. T.Application-Resource- MFPlus MFPlus resource unavailability: The availability of resources for the MIFARE Plus Licensed product shall be controlled to prevent denial of service or malfunction. An attacker prevents correct execution of MIFARE Plus through consumption of some resources of the card: e.g. RAM or non volatile RAM. T.Data-Modification- DESFire Unauthorised data modification for DESFire: User data stored by the TOE may be modified by unauthorised subjects. This threat applies to the processing of modification commands received by the TOE, it is not concerned with verification of authenticity. Security problem definition (ASE_SPD) ST31G480 E01 platform Security Target for composition 30/144 SMD_ST31G480_ST_18_002 3.3 Organisational security policies 101 The TOE provides specific security functionality that can be used by the Security IC Embedded Software. In the following specific security functionality is listed which is not T.Impersonate-DESFire Impersonating authorised users during authentication for DESFire: An unauthorised subject may try to impersonate an authorised subject during the authentication sequence, e.g. by a man-in-the middle or replay attack. T.Cloning-DESFire Cloning for DESFire: User and TSF data stored on the TOE (including keys) may be read out by an unauthorised subject in order to create a duplicate. T.Confid-Applic-Code- DESFire DESFire code confidentiality: MIFARE DESFire EV1 Licensed product code must be protected against unauthorized disclosure. This relates to attacks at runtime to gain read or compare access to memory area where the MIFARE DESFire EV1 licensed product executable code is stored. The attacker executes an application to disclose code belonging to MIFARE DESFire EV1 Licensed product. T.Confid-Applic-Data- DESFire DESFire data confidentiality: MIFARE DESFire EV1 Licensed product data must be protected against unauthorized disclosure. This relates to attacks at runtime to gain read or compare access to the MIFARE DESFire EV1 licensed product data by another application. For example, the attacker executes an application that tries to read data belonging to MIFARE DESFire EV1 Licensed product. T.Integ-Applic-Code- DESFire DESFire code integrity: MIFARE DESFire EV1 Licensed product code must be protected against unauthorized modification. This relates to attacks at runtime to gain write access to memory area where the MIFARE DESFire EV1 licensed product executable code is stored. The attacker executes an application that tries to alter (part of) the DESFire EV1 code. T.Integ-Applic-Data- DESFire DESFire data integrity: MIFARE DESFire EV1 Licensed product data must be protected against unauthorized modification. This relates to attacks at runtime to gain write access to the MIFARE DESFire EV1 Licensed product data by another application. The attacker executes an application that tries to alter (part of) the DESFire EV1 Licensed product data. T.Resource-DESFire DESFire resource unavailability: The availability of resources for the MIFARE DESFire EV1 Licensed product shall be controlled to prevent denial of service or malfunction. An attacker prevents correct execution of DESFire EV1 through consumption of some resources of the card: e.g. RAM or non volatile RAM. ST31G480 E01 platform Security Target for composition Security problem definition (ASE_SPD) SMD_ST31G480_ST_18_002 31/144 derived from threats identified for the TOE’s environment because it can only be decided in the context of the Security IC application, against which threats the Security IC Embedded Software will use the specific security functionality. 102 ST applies the Protection policy during TOE Development and Production (BSI.P.Process- TOE) as specified below. 103 BSI.P.Lim-Block-Loader and BSI.P.Ctrl-Loader are dedicated to the Secure Flash Loader, and described in the BSI-CC-PP-0084-2014 packages “Loader dedicated for usage in secured environment only” and “Loader dedicated for usage by authorized users only”. BSI.P.Ctrl-Loader has been completed in accordance with ANSSI-CC-NOTE-06/2.0 EN. 104 ST applies the Additional Specific Security Functionality policy (AUG1.P.Add-Functions) as specified below. 105 New Organisational Security Policies (OSPs) are defined here below: 106 P.Confidentiality, P.Transaction and P.No-Trace-DESFire are related to DESFire, and valid in case DESFire is embbeded in the TOE. 107 P.MAC and P.No-Trace-MFPlus are related to MFPlus, and valid in case MFPlus is embbeded in the TOE. 108 P.Resp-Appl are related to the ES that is part of the evaluation (NesLib and/or DESFire and/or MFPlus), and valid in case NesLib or DESFire or MFPlus are embbeded in the TOE. BSI.P.Process-TOE Identification during TOE Development and Production: An accurate identification is established for the TOE. This requires that each instantiation of the TOE carries this unique identification. BSI.P.Lim-Block-Loader Limiting and blocking the loader functionality: The composite manufacturer uses the Loader for loading of Security IC Embedded Software, user data of the Composite Product or IC Dedicated Support Software in charge of the IC Manufacturer. He limits the capability and blocks the availability of the Loader(1) in order to protect stored data from disclosure and manipulation. 1. Note that blocking the Loader is not required, as only authorized users can use the Loader as stated in BSI.P.Ctrl-Loader. Security problem definition (ASE_SPD) ST31G480 E01 platform Security Target for composition 32/144 SMD_ST31G480_ST_18_002 BSI.P.Ctrl-Loader Controlled usage to Loader Functionality: Authorized user controls the usage of the Loader functionality in order to protect stored and loaded user data from disclosure and manipulation. The activation of the loaded Additional Code user data is possible if: – integrity and authenticity of the Additional Code user data have been successfully checked; – the loaded Additional Code user data is targeted to the Initial TOE (Identification Data of the Additional Code user data and the Initial TOE will be used for this check). Identification Data of the resulting Final TOE shall identify the Initial TOE and the activated Additional Code user data. Identification Data shall be protected in integrity. Note: Here, the term TOE denotes the TOE itself as well as the composite TOE which both may be maintained by loading of data. AUG1.P.Add-Functions Additional Specific Security Functionality: The TOE shall provide the following specific security functionality to the Security IC Embedded Software: – Triple Data Encryption Standard (TDES), – Advanced Encryption Standard (AES), – Elliptic Curves Cryptography on GF(p), if NesLib is embedded, – Secure Hashing (SHA-1(2) , SHA-224, SHA-256, SHA-384, SHA-512), if NesLib is embedded, – Rivest-Shamir-Adleman (RSA), if NesLib is embedded, – Deterministic Random Bit Generator (DRBG), if NesLib is embedded, – Keccak, if NesLib is embedded, – Keccak-p, if NesLib is embedded, – Diffie-Hellman, if NesLib is embedded, – Prime Number Generation, if NesLib is embedded. 1. Note that DES and triple DES with two keys are no longer recommended as encryption functions in the context of smart card applications. Hence, Security IC Embedded Software may need to use triple DES with three keys to achieve a suitable strength. 2. Note that SHA-1 is no longer recommended as a cryptographic function in the context of smart card applications. Hence, Security IC Embedded Software may need to use another SHA to achieve a suitable strength. P.Encryption Confidentiality during communication for MFPlus: The TOE shall provide the possibility to protect selected data elements from eavesdropping during contact-less communication. ST31G480 E01 platform Security Target for composition Security problem definition (ASE_SPD) SMD_ST31G480_ST_18_002 33/144 3.4 Assumptions 109 The following assumptions are described in the BSI-CC-PP-0084-2014, section 3.4. 110 The following assumptions are defined for DESFire or MFPLus only. Thus, they do not contradict with the security problem definition of the BSI-CC-PP-0084- 2014, as they are only related to assets which are out of the scope of this PP. 111 In consequence, the addition of these asumptions does not contradict with the strict conformance claim on the BSI-CC-PP-0084-2014. 112 The following assumptions are valid in case MFPlus is embedded in the TOE. P.MAC Integrity during communication for MFPlus: The TOE shall provide the possibility to protect the contact-less communication from modification or injections. This includes especially the possibility to detect replay or man-in-the-middle attacks within a session. P.No-Trace-MFPlus Un-traceability of end-users for MFPlus: The TOE shall provide the ability that authorised subjects can prevent that end-user of TOE may be traced by unauthorised subjects without consent. Tracing of end-users may happen by performing a contact-less communication with the TOE when the end-user is not aware of it. Typically this involves retrieving the UID or any freely accessible data element. P.Confidentiality Confidentiality during communication for DESFire: The TOE shall provide the possibility to protect selected data elements from eavesdropping during contact-less communication. The TOE shall also provide the possibility to detect replay or man-in-the-middle attacks within a session. P.Transaction Transaction mechanism for DESFire: The TOE shall provide the possibility to combine a number of data modification operations in one transaction, so that either all operations or no operation at all is performed. P.No-Trace-DESFire Un-traceability of end-users for DESFire: The TOE shall provide the ability that authorised subjects can prevent that end-user of TOE may be traced by unauthorised subjects without consent. Tracing of end-users may happen by performing a contact-less communication with the TOE when the end-user is not aware of it. Typically this involves retrieving the UID or any freely accessible data element. P.Resp-Appl Treatment of user data: The Security IC Embedded Software, part of the TOE, treats user data according to the assumption A.Resp-Appl defined in BSI- CC-PP-0084-2014. BSI.A.Process-Sec-IC Protection during Packaging, Finishing and Personalisation BSI.A.Resp-Appl Treatment of User Data of the Composite TOE Security problem definition (ASE_SPD) ST31G480 E01 platform Security Target for composition 34/144 SMD_ST31G480_ST_18_002 113 The following assumptions are valid in case DESFire is embedded in the TOE. A.Secure-Values-MFPlus Usage of secure values for MFPlus: Only confidential and secure keys shall be used to set up the authentication and access rights in MFPlus. These values are generated outside the TOE and they are downloaded to the TOE. A.Terminal-Support- MFPlus Terminal support to ensure integrity and confidentiality for MFPlus: The terminal verifies information sent by the TOE in order to ensure integrity and confidentiality of the communication. A.Secure-Values-DESFire Usage of secure values for DESFire: Only confidential and secure keys shall be used to set up the authentication and access rights in DESFire. These values are generated outside the TOE and they are downloaded to the TOE. A.Terminal-Support- DESFire Terminal support to ensure integrity and confidentiality: The terminal verifies information sent by the TOE in order to ensure integrity and confidentiality of the communication. ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 35/144 4 Security objectives (ASE_OBJ) 114 The security objectives of the TOE cover principally the following aspects: • integrity and confidentiality of assets, • protection of the TOE and associated documentation during development and production phases, • provide random numbers, • provide cryptographic support and access control functionality. 115 A summary of all security objectives is provided in Table 5. 116 Note that the origin of each objective is clearly identified in the prefix of its label. Most of these security aspects can therefore be easily found in the BSI-CC-PP-0084-2014, sections 4.1 and 7.3. Only those which have been amended, those originating in AUG, those originating in ANSSI-CC-NOTE-06/2.0 EN, and the ones introduced in this Security Target, are detailed in the following sections. Table 5. Summary of security objectives Label Title TOE BSI.O.Leak-Inherent Protection against Inherent Information Leakage BSI.O.Phys-Probing Protection against Physical Probing BSI.O.Malfunction Protection against Malfunctions BSI.O.Phys-Manipulation Protection against Physical Manipulation BSI.O.Leak-Forced Protection against Forced Information Leakage BSI.O.Abuse-Func Protection against Abuse of Functionality BSI.O.Identification TOE Identification BSI.O.RND Random Numbers BSI.O.Cap-Avail-Loader Capability and Availability of the Loader BSI.O.Ctrl-Auth-Loader Access control and authenticity for the Loader ANSSI.O.Prot-TSF- Confidentiality Protection of the confidentiality of the TSF ANSSI.O.Secure-Load-ACode Secure loading of the Additional Code ANSSI.O.Secure-AC-Activation Secure activation of the Additional Code ANSSI.O.TOE-Identification Secure identification of the TOE O.Secure-Load-AMemImage Secure loading of the Additional Memory Image O.MemImage-Identification Secure identification of the Memory Image BSI.O.Authentication Authentication to external entities AUG1.O.Add-Functions Additional Specific Security Functionality AUG4.O.Mem-Access Dynamic Area based Memory Access Control Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 36/144 SMD_ST31G480_ST_18_002 TOE O.Access-Control-MFPlus Access Control for MFPlus O.Authentication-MFPlus Authentication for MFPlus O.Encryption MFPlus Confidential Communication O.MAC-MFPlus MFPlus integrity-protected Communication O.Type-Consistency-MFPlus MFPlus Data type consistency O.No-Trace-MFPlus Preventing Traceability for MFPlus O.Resp-Appl-MFPlus Treatment of user data for MFPlus O.Resource-MFPlus Resource availability for MFPlus O.Firewall-MFPlus MFPlus firewall O.Shr-Var-MFPlus MFPlus data cleaning for resource sharing O.Verification-MFPlus MFPlus code integrity check O.Access-Control-DESFire Access Control for DESFire O.Authentication-DESFire Authentication for DESFire O.Confidentiality-DESFire DESFire Confidential Communication O.Type-Consistency-DESFire DESFire Data type consistency O.Transaction-DESFire DESFire Transaction mechanism O.No-Trace-DESFire Preventing Traceability for DESFire O.Resp-Appl-DESFire Treatment of user data for DESFire O.Resource-DESFire Resource availability for DESFire O.Firewall-DESFire DESFire firewall O.Shr-Res-DESFire DESFire data cleaning for resource sharing O.Verification-DESFire DESFire code integrity check Table 5. Summary of security objectives (continued) Label Title ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 37/144 4.1 Security objectives for the TOE Environments BSI.OE.Resp-Appl Treatment of User Data of the Composite TOE BSI.OE.Process-Sec-IC Protection during composite product manufacturing BSI.OE.Lim-Block-Loader Limitation of capability and blocking the Loader BSI.OE.Loader-Usage Secure communication and usage of the Loader BSI.OE.TOE-Auth External entities authenticating of the TOE OE.Composite-TOE-Id Composite TOE identification OE.TOE-Id TOE identification OE.Enable-Disable-Secure- Diag Enabling or disabling the Secure Diagnostic OE.Secure-Diag-Usage Secure communication and usage of the Secure Diagnostic OE.Secure-Values-MFPlus Generation of secure values for MFPlus OE.Terminal-Support-MFPlus Terminal support to ensure integrity and confidentiality for MFPlus OE.Secure-Values-DESFire Generation of secure values for DESFire OE.Terminal-Support-DESFire Terminal support to ensure integrity and confidentiality for DESFire Table 5. Summary of security objectives (continued) Label Title BSI.O.Leak-Inherent Protection against Inherent Information Leakage BSI.O.Phys-Probing Protection against Physical Probing BSI.O.Malfunction Protection against Malfunctions BSI.O.Phys-Manipulation Protection against Physical Manipulation BSI.O.Leak-Forced Protection against Forced Information Leakage BSI.O.Abuse-Func Protection against Abuse of Functionality BSI.O.Identification TOE Identification BSI.O.RND Random Numbers BSI.O.Cap-Avail-Loader Capability and Availability of the Loader BSI.O.Ctrl-Auth-Loader Access control and authenticity for the Loader BSI.O.Authentication Authentication to external entities Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 38/144 SMD_ST31G480_ST_18_002 ANSSI.O.Prot-TSF- Confidentiality Protection of the confidentiality of the TSF: The TOE must provide protection against disclosure of confidential operations of the Security IC (loader, memory management unit, …) through the use of a dedicated code loaded on open samples. ANSSI.O.Secure-Load- ACode Secure loading of the Additional Code: The Loader of the Initial TOE shall check an evidence of authenticity and integrity of the loaded Additional Code. The Loader enforces that only the allowed version of the Additional Code can be loaded on the Initial TOE. The Loader shall forbid the loading of an Additional Code not intended to be assembled with the Initial TOE. During the Load Phase of an Additional Code, the TOE shall remain secure. Note: Concretely, the TOE manages the Additional Code as a Memory Image. ANSSI.O.Secure-AC- Activation Secure activation of the Additional Code: Activation of the Additional Code and update of the Identification Data shall be performed at the same time in an Atomic way. All the operations needed for the code to be able to operate as in the Final TOE shall be completed before activation. If the Atomic Activation is successful, then the resulting product is the Final TOE, otherwise (in case of interruption or incident which prevents the forming of the Final TOE), the Initial TOE shall remain in its initial state or fail secure. ANSSI.O.TOE-Identification Secure identification of the TOE: The Identification Data identifies the Initial TOE and Additional Code. The TOE provides means to store Identification Data in its non-volatile memory and guarantees the integrity of these data. After Atomic Activation of the Additional Code, the Identification Data of the Final TOE allows identifications of Initial TOE and Additional TOE. The user shall be able to uniquely identify Initial TOE and Additional Code(s) which are embedded in the Final TOE. ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 39/144 O.Secure-Load-AMemImage Secure loading of the Additional Memory Image: The Loader of the TOE shall check an evidence of authenticity and integrity of the loaded Memory Image. The Loader enforces that only the allowed version of the Additional Memory Image can be loaded after the Initial Memory Image. The Loader shall forbid the loading of an Additional Memory Image not intended to be assembled with the Initial Memory Image. Note: This objective is similar to ANSSI.O.Secure-Load- ACode, applied to user data (e.g. embedded software). O.MemImage-Identification Secure identification of the Memory Image: The Identification Data identifies the Initial Memory Image and Additional Memory Image. The TOE provides means to store Identification Data in its non-volatile memory and guarantees the integrity of these data. Storage of the Additional Memory Image and update of the Identification Data shall be performed at the same time in an Atomic way, otherwise (in case of interruption or incident which prevents this alignment), the Memory Image shall remain in its initial state or the TOE shall fail secure. The Identification Data of the Final Memory Image allows identifications of Initial Memory Image and Additional Memory Image. Note: This objective is similar to ANSSI.O.Secure-AC- Activation and ANSSI.O.TOE-Identification, applied to user data (e.g. embedded software). AUG1.O.Add-Functions Additional Specific Security Functionality: The TOE must provide the following specific security functionality to the Security IC Embedded Software: – Triple Data Encryption Standard (TDES), – Advanced Encryption Standard (AES), – Elliptic Curves Cryptography on GF(p), if NesLib is embedded, – Secure Hashing (SHA-1, SHA-224, SHA-256, SHA-384, SHA-512), if NesLib is embedded, – Rivest-Shamir-Adleman (RSA), if NesLib is embedded, – Deterministic Random Bit Generator (DRBG), if NesLib is embedded, – Keccak, if NesLib is embedded, – Keccak-p, if NesLib is embedded, – Diffie-Hellman, if NesLib is embedded, – Prime Number Generation, if NesLib is embedded. Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 40/144 SMD_ST31G480_ST_18_002 117 The following objectives are only valid in case MFPlus is embedded: AUG4.O.Mem-Access Dynamic Area based Memory Access Control: The TOE must provide the Security IC Embedded Software with the capability to define dynamic memory segmentation and protection. The TOE must then enforce the defined access rules so that access of software to memory areas is controlled as required, for example, in a multi-application environment. O.Access-Control-MFPlus Access Control for MFPlus: The TOE must provide an access control mechanism for data stored by it. The access control mechanism shall apply to all operations for data elements and to reading and modifying security attributes as well as authentication data. The cryptographic keys used for authentication shall never be output. O.Authentication-MFPlus Authentication for MFPlus: The TOE must provide an authentication mechanism in order to be able to authenticate authorised users. The authentication mechanism shall be resistant against replay and man-in-the-middle attacks. O.Encryption MFPlus Confidential Communication: The TOE must be able to protect the communication by encryption. This shall be implemented by security attributes that enforce encrypted communication for the respective data elements. O.MAC-MFPlus MFPlus Integrity-protected Communication: The TOE must be able to protect the communication by adding a MAC. This shall be mandatory for commands that modify data on the TOE and optional on read commands. In addition, a security attribute shall be available to mandate MAC on read commands, too. Usage of the protected communication shall also support the detection of injected and bogus commands within the communication session before the protected data transfer. O.Type-Consistency-MFPlus MFPlus Data type consistency: The TOE must provide a consistent handling of the different supported data types. This comprises over- and underflow checking for values and for block sizes. ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 41/144 118 The following objectives are only valid in case DESFire is embedded: O.No-Trace-MFPlus Preventing Traceability for MFPlus: The TOE must be able to prevent that the TOE end-user can be traced. This shall be done by providing an option that disables the transfer of privacy-related information that is suitable for tracing an end-user by an unauthorised subject. O.Resp-Appl-MFPlus Treatment of user data for MFPlus: Security relevant User Data (especially cryptographic keys) are treated by the Security IC Embedded Software as required by the security needs of the specific application context. For example the Security IC Embedded Software will not disclose security relevant user data to unauthorised users or processes when communicating with a terminal. O.Resource-MFPlus Resource availability for MFPlus: The TOE shall control the availability of resources for MIFARE Plus Licensed product. O.Firewall-MFPlus MFPlus firewall : The TOE shall ensure isolation of data and code between MIFARE Plus and the other applications. An application shall not read, write, compare any piece of data or code belonging to the MIFARE Plus Licensed product. O.Shr-Var-MFPlus MFPlus data cleaning for resource sharing: It shall be ensured that any hardware resource, that is shared by MIFARE Plus and other applications or by any application which has access to such hardware resource, is always cleaned (using code that is part of the MIFARE Plus system and its certification) whenever MIFARE Plus is interrupted by the operation of another application. The only exception is buffers as long as these buffers do not contain other information than what is communicated over the contactless interface or has a form that is no different than what is normally communicated over the contacless interface. For example, no data shall remain in a hardware crytographic coprocessor when MIFARE Plus is interrupted by another application. The cleaning must be done such that no information is leaking from this cleaning process allowing for among others timing or SPA/DPA attacks. O.Verification-MFPlus MFPlus code integrity check: The TOE shall ensure that MIFARE Plus code is verified for integrity and authenticity prior being executed. Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 42/144 SMD_ST31G480_ST_18_002 O.Access-Control-DESFire Access Control for DESFire: The TOE must provide an access control mechanism for data stored by it. The access control mechanism shall apply to read, modify, create and delete operations for data elements and to reading and modifying security attributes as well as authentication data. It shall be possible to limit the right to perform a specific operation to a specific user. The security attributes (keys) used for authentication shall never be output. O.Authentication-DESFire Authentication for DESFire: The TOE must provide an authentication mechanism in order to be able to authenticate authorised users. The authentication mechanism shall be resistant against replay and man-in-the-middle attacks. O.Confidentiality-DESFire DESFire Confidential Communication: The TOE must be able to protect the communication by encryption. This shall be implemented by security attributes that enforce encrypted communication for the respective data element. The TOE shall also provide the possibility to detect replay or man-in-the-middle attacks within a session. This shall be implemented by checking verification data sent by the terminal and providing verification data to the terminal. O.Type-Consistency- DESFire DESFire Data type consistency: The TOE must provide a consistent handling of the different supported data types. This comprises over- and underflow checking for values, for data file sizes and record handling. O.Transaction-DESFire DESFire Transaction mechanism: The TOE must be able to provide a transaction mechanism that allows to update multiple data elements either all in common or none of them. O.No-Trace-DESFire Preventing Traceability for DESFire: The TOE must be able to prevent that the TOE end-user can be traced. This shall be done by providing an option that disables the transfer of any information that is suitable for tracing an end-user by an unauthorised subject. O.Resp-Appl-DESFire Treatment of user data for DESFire: Security relevant User Data (especially cryptographic keys) are treated by the Security IC Embedded Software as required by the security needs of the specific application context. For example the Security IC Embedded Software will not disclose security relevant user data to unauthorised users or processes when communicating with a terminal. O.Resource-DESFire Resource availability for DESFire: The TOE shall control the availability of resources for MIFARE DESFire EV1 Licensed product. ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 43/144 4.2 Security objectives for the environment 119 Security Objectives for the Security IC Embedded Software development environment (phase 1): 120 Security Objectives for the operational Environment (phase 4 up to 7): O.Firewall-DESFire DESFire firewall: The TOE shall ensure isolation of data and code between MIFARE DESFire EV1 and the other applications. An application shall not read, write, compare any piece of data or code belonging to the MIFARE DESFire EV1 Licensed product. O.Shr-Res-DESFire DESFire data cleaning for resource sharing: It shall be ensured that any hardware resource, that is shared by MIFARE DESFire EV1 and other applications or by any application which has access to such hardware resource, is always cleaned (using code that is part of the MIFARE DESFire EV1 system and its certification) whenever MIFARE DESFire EV1 is interrupted by the operation of another application. The only exception is buffers as long as these buffers do not contain other information than what is communicated over the contactless interface or has a form that is no different than what is normally communicated over the contacless interface. For example, no data shall remain in a hardware crytographic coprocessor when MIFARE DESFire EV1 is interrupted by another application. O.Verification-DESFire DESFire code integrity check: The TOE shall ensure that MIFARE DESFire EV1 code is verified for integrity and authenticity prior being executed. BSI.OE.Resp-Appl Treatment of User Data of the Composite TOE BSI.OE.Process-Sec-IC Protection during composite product manufacturing Up to phase 6 Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 44/144 SMD_ST31G480_ST_18_002 BSI.OE.Lim-Block-Loader Limitation of capability and blocking the Loader: The Composite Product Manufacturer will protect the Loader functionality against misuse, limit the capability of the Loader and, if desired, terminate irreversibly the Loader after intended usage of the Loader. Note that blocking the Loader is not required, as only authorized users can use the Loader as stated in BSI.P.Ctrl-Loader. Up to phase 6 BSI.OE.Loader-Usage Secure communication and usage of the Loader: The authorized user must support the trusted communication channel with the TOE by confidentiality protection and authenticity proof of the data to be loaded and fulfilling the access conditions required by the Loader. The authorized user must organize the maintenance transactions to ensure that the additional code (loaded as data) is able to operate as in the Final composite TOE. The authorized user must manage and associate unique Identification to the loaded data. Up to phase 7 OE.Composite-TOE-Id Composite TOE identification: The composite manufacturer must maintain a unique identification of a composite TOE under maintenance. Up to phase 7 OE.TOE-Id TOE identification: The IC manufacturer must maintain a unique identification of the TOE under maintenance. Up to phase 7 OE.Enable-Disable- Secure-Diag Enabling or disabling the Secure Diagnostic: If desired, the Composite Product Manufacturer will enable (or disable) irreversibly the Secure Diagnostic capability, thus enabling the IC manufacturer (or disabling everyone) to exercise the Secure Diagnostic capability. Up to phase 7 ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 45/144 121 This section details the security objectives for the operational environment, related to MFPlus or DESFire, and to be enforced after TOE delivery up to phase 7. 122 The following security objectives for the operational environment are only valid if MFPlus is embedded in the TOE: 123 The following security objectives for the operational environment are only valid if DESFire is embedded in the TOE: OE.Secure-Diag-Usage Secure communication and usage of the Secure Diagnostic: The IC manufacturer must support the trusted communication channel with the TOE by fulfilling the access conditions required by the Secure Diagnostic. The IC manufacturer must manage the Secure Diagnostic transactions so that they cannot be used to disclose critical user data of the Composite TOE, manipulate critical user data of the Composite TOE, manipulate Security IC Embedded Software or bypass, deactivate, change or explore security features or security services of the TOE Up to phase 7 OE.Secure-Values-MFPlusGeneration of secure values for MFPlus: The environment shall generate confidential and secure keys for authentication purpose. These values are generated outside the TOE and they are downloaded to the TOE during the personalisation or usage in phase 5 to 7. OE.Terminal-Support- MFPlus Terminal support to ensure integrity and confidentiality for MFPlus: The terminal shall verify information sent by the TOE in order to ensure integrity and confidentiality of the communication. This involves checking of MAC values, verification of redundancy information according to the cryptographic protocol and secure closing of the communication session. Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 46/144 SMD_ST31G480_ST_18_002 4.3 Security objectives rationale 124 The main line of this rationale is that the inclusion of all the security objectives of the BSI- CC-PP-0084-2014 protection profile, together with those in AUG, and those introduced in this ST, guarantees that all the security environment aspects identified in Section 3 are addressed by the security objectives stated in this chapter. 125 Thus, it is necessary to show that: • security environment aspects from AUG and from this ST, are addressed by security objectives stated in this chapter, • security objectives from AUG and from this ST, are suitable (i.e. they address security environment aspects), • security objectives from AUG and from this ST, are consistent with the other security objectives stated in this chapter (i.e. no contradictions). 126 The selected augmentations from AUG introduce the following security environment aspects: • TOE threat "Memory Access Violation, (AUG4.T.Mem-Access)", • organisational security policy "Additional Specific Security Functionality, (AUG1.P.Add- Functions)". 127 The augmentation made in this ST introduces the following security environment aspects: • TOE threats "Diffusion of open samples, (ANSSI.T.Open-Samples-Diffusion)", "Unauthorised data modification for MFPlus, (T.Data-Modification-MFPlus)", "Impersonating authorised users during authentication for MFPlus, (T.Impersonate- MFPlus)", "Cloning for MFPlus, (T.Cloning-MFPlus)", "MFPlus code confidentiality, (T.Confid-Applic-Code-MFPlus)", " MFPlus data confidentiality, (T.Confid-Applic-Data- MFPlus)", " MFPlus code integrity, (T.Integ-Applic-Code-MFPlus)", "MFPlus data integrity, (T.Integ-Applic-Data-MFPlus)", "MFPlus resource unavailability, (T.Application-Resource-MFPlus)", "Unauthorised data modification for DESFire, (T.Data-Modification-DESFire)", "Impersonating authorised users during authentication for DESFire, (T.Impersonate-DESFire)", "Cloning for DESFire, (T.Cloning-DESFire)", "DESFire code confidentiality, (T.Confid-Applic-Code-DESFire)", "DESFire data confidentiality, (T.Confid-Applic-Data-DESFire)", "DESFire code integrity, (T.Integ- OE.Secure-Values- DESFire Generation of secure values for DESFire: The environment shall generate confidential and secure keys for authentication purpose. These values are generated outside the TOE and they are downloaded to the TOE during the personalisation or usage in phase 5 to 7. OE.Terminal-Support- DESFire Terminal support to ensure integrity and confidentiality for DESFire: The terminal shall verify information sent by the TOE in order to ensure integrity and confidentiality of the communication. This involves checking of MAC values, verification of redundancy information according to the cryptographic protocol and secure closing of the communication session. ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 47/144 Applic-Code-DESFire)", "DESFire data integrity, (T.Integ-Applic-Data-DESFire)", and "DESFire resource unavailability, (T.Resource-DESFire)". • organisational security policies "Confidentiality during communication for MFPlus, (P.Encryption)", “Integrity during communication for MFPlus, (P.MAC)", "Un-traceability of end-users for MFPlus, (P.No-Trace-MFPlus)", "Confidentiality during communication for DESFire, (P.Confidentiality)", "Transaction mechanism for DESFire, (P.Transaction)", "Un-traceability of end-users for DESFire, (P.No-Trace-DESFire)", and "Treatment of user data, (P.Resp-Appl)". • assumptions "Usage of secure values for MFPlus, (A.Secure-Values-MFPlus)", and "Terminal support to ensure integrity and confidentiality for MFPlus, (A.Terminal- Support-MFPlus)", "Usage of secure values for DESFire, (A.Secure-Values-DESFire)", and "Terminal support to ensure integrity and confidentiality for DESFire, (A.Terminal- Support-DESFire)". 128 The justification of the additional policies, additional threats, and additional assumptions provided in the next subsections shows that they do not contradict to the rationale already given in the protection profile BSI-CC-PP-0084-2014 for the assumptions, policy and threats defined there. 129 In particular, the added assumptions do not contradict with the policies, threats and assumptions of the BSI-CC-PP-0084-2014 Protection Profile, to which strict conformance is claimed, because they are all exclusively related to DESFire or MIFARE Plus, which are out of the scope of this protection profile. Table 6. Security Objectives versus Assumptions, Threats or Policies Assumption, Threat or Organisational Security Policy Security Objective Notes BSI.A.Resp-Appl BSI.OE.Resp-Appl Phase 1 BSI.P.Process-TOE BSI.O.Identification Phase 2-3 optional Phase 4 BSI.A.Process-Sec-IC BSI.OE.Process-Sec-IC Phase 5-6 optional Phase 4 BSI.P.Lim-Block-Loader BSI.O.Cap-Avail-Loader BSI.OE.Lim-Block-Loader BSI.P.Ctrl-Loader BSI.O.Ctrl-Auth-Loader ANSSI.O.Secure-Load-ACode ANSSI.O.Secure-AC-Activation ANSSI.O.TOE-Identification O.Secure-Load-AMemImage O.MemImage-Identification BSI.OE.Loader-Usage OE.TOE-Id OE.Composite-TOE-Id A.Secure-Values-DESFire OE.Secure-Values-DESFire Phases 5-7 A.Secure-Values-MFPlus OE.Secure-Values-MFPlus Phases 5-7 Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 48/144 SMD_ST31G480_ST_18_002 A.Terminal-Support-DESFire OE.Terminal-Support-DESFire Phase 7 A.Terminal-Support-MFPlus OE.Terminal-Support-MFPlus Phase 7 AUG1.P.Add-Functions AUG1.O.Add-Functions P.Encryption O.Encryption P.MAC O.MAC-MFPlus OE.Terminal-Support-MFPlus P.No-Trace-MFPlus O.No-Trace-MFPlus O.Access-Control-MFPlus O.Authentication-MFPlus P.Confidentiality O.Confidentiality-DESFire OE.Terminal-Support-DESFire P.Transaction O.Transaction-DESFire P.No-Trace-DESFire O.No-Trace-DESFire O.Access-Control-DESFire O.Authentication-DESFire P.Resp-Appl O.Resp-Appl-DESFire O.Resp-Appl-MFPlus BSI.T.Leak-Inherent BSI.O.Leak-Inherent BSI.T.Phys-Probing BSI.O.Phys-Probing BSI.T.Malfunction BSI.O.Malfunction BSI.T.Phys-Manipulation BSI.O.Phys-Manipulation BSI.T.Leak-Forced BSI.O.Leak-Forced BSI.T.Abuse-Func BSI.O.Abuse-Func OE.Enable-Disable-Secure-Diag OE.Secure-Diag-Usage BSI.T.RND BSI.O.RND BSI.T.Masquerade-TOE BSI.O.Authentication AUG4.T.Mem-Access AUG4.O.Mem-Access ANSSI.T.Open-Samples-Diffusion ANSSI.O.Prot-TSF-Confidentiality BSI.O.Leak-Inherent BSI.O.Leak-Forced T.Data-Modification-MFPlus O.Access-Control-MFPlus O.Type-Consistency-MFPlus OE.Terminal-Support-MFPlus T.Impersonate-MFPlus O.Authentication-MFPlus Table 6. Security Objectives versus Assumptions, Threats or Policies (continued) Assumption, Threat or Organisational Security Policy Security Objective Notes ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 49/144 4.3.1 Assumption "Usage of secure values for MFPlus" 130 The justification related to the assumption “Usage of secure values for MFPlus, (A.Secure- Values-MFPlus)” is as follows: 131 Since OE.Secure-Values-MFPlus requires secure values for the configuration of the authentication and access control as assumed in A.Secure-Values-MFPlus, the assumption is covered by the objective. 132 A.Secure-Values-MFPlus and OE.Secure-Values-MFPlus do not contradict with the security problem definition of the BSI-CC-PP-0084-2014, because they are only related to MFPlus, which is out of the scope of this protection profile. 4.3.2 Assumption "Terminal support to ensure integrity and confidentiality for MFPlus" 133 The justification related to the assumption “Terminal support to ensure integrity and confidentiality for MFPlus, (A.Terminal-Support-MFPlus)” is as follows: T.Cloning-MFPlus O.Access-Control-MFPlus O.Authentication-MFPlus T.Confid-Applic-Code-MFPlus O.Firewall-MFPlus T.Confid-Applic-Data-MFPlus O.Firewall-MFPlus T.Integ-Applic-Code-MFPlus O.Verification-MFPlus O.Firewall-MFPlus T.Integ-Applic-Data-MFPlus O.Shr-Var-MFPlus O.Firewall-MFPlus T.Application-Resource-MFPlus O.Resource-MFPlus T.Data-Modification-DESFire O.Access-Control-DESFire O.Type-Consistency-DESFire OE.Terminal-Support-DESFire T.Impersonate-DESFire O.Authentication-DESFire T.Cloning-DESFire O.Access-Control-DESFire O.Authentication-DESFire T.Confid-Applic-Code-DESFire O.Firewall-DESFire T.Confid-Applic-Data-DESFire O.Firewall-DESFire T.Integ-Applic-Code-DESFire O.Verification-DESFire O.Firewall-DESFire T.Integ-Applic-Data-DESFire O.Shr-Res-DESFire O.Firewall-DESFire T.Resource-DESFire O.Resource-DESFire Table 6. Security Objectives versus Assumptions, Threats or Policies (continued) Assumption, Threat or Organisational Security Policy Security Objective Notes Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 50/144 SMD_ST31G480_ST_18_002 134 The objective OE.Terminal-Support-MFPlus is an immediate transformation of the assumption A.Terminal-Support-MFPlus, therefore it covers the assumption. 135 A.Terminal-Support-MFPlus and OE.Terminal-Support-MFPlus do not contradict with the security problem definition of the BSI-CC-PP-0084-2014, because they are only related to MFPlus, which is out of the scope of this protection profile. 4.3.3 Assumption "Usage of secure values for DESFire" 136 The justification related to the assumption “Usage of secure values for DESFire, (A.Secure- Values-DESFire)” is as follows: 137 Since OE.Secure-Values-DESFire requires from the Administrator, Application Manager or the Application User to use secure values for the configuration of the authentication and access control as assumed in A.Secure-Values-DESFire, the assumption is covered by the objective. 138 A.Secure-Values-DESFire and OE.Secure-Values-DESFire do not contradict with the security problem definition of the BSI-CC-PP-0084-2014, because they are only related to DESFire, which is out of the scope of this protection profile. 4.3.4 Assumption "Terminal support to ensure integrity and confidentiality for DESFire" 139 The justification related to the assumption “Terminal support to ensure integrity and confidentiality for DESFire, (A.Terminal-Support-DESFire)” is as follows: 140 The objective OE.Terminal-Support-DESFire is an immediate transformation of the assumption A.Terminal-Support-DESFire, therefore it covers the assumption. 141 A.Terminal-Support-DESFire and OE.Terminal-Support-DESFire do not contradict with the security problem definition of the BSI-CC-PP-0084-2014, because they are only related to DESFire, which is out of the scope of this protection profile. 4.3.5 TOE threat "Abuse of Functionality" 142 The justification related to the threat “Abuse of Functionality, (BSI.T.Abuse-Func)” is as follows: 143 The threat BSI.T.Abuse-Func is directly covered by the security objective BSI.O.Abuse- Func, supported by the security objectives for the operational environment OE.Enable- Disable-Secure-Diag and OE.Secure-Diag-Usage for the particular case of the Secure Diagnostic. Therefore BSI.T.Abuse-Func is covered by these three objectives. 4.3.6 TOE threat "Memory Access Violation" 144 The justification related to the threat “Memory Access Violation, (AUG4.T.Mem-Access)” is as follows: 145 According to AUG4.O.Mem-Access the TOE must enforce the dynamic memory segmentation and protection so that access of software to memory areas is controlled. Any restrictions are to be defined by the Security IC Embedded Software. Thereby security violations caused by accidental or deliberate access to restricted data (which may include code) can be prevented (refer to AUG4.T.Mem-Access). The threat AUG4.T.Mem-Access is therefore removed if the objective is met. ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 51/144 146 The added objective for the TOE AUG4.O.Mem-Access does not introduce any contradiction in the security objectives for the TOE. 4.3.7 TOE threat "Diffusion of open samples" 147 The justification related to the threat “Diffusion of open samples, (ANSSI.T.Open-Samples- Diffusion)” is as follows: 148 According to threat ANSSI.T.Open-Samples-Diffusion, the TOE shall provide protection against attacks using open samples of the TOE to characterize the behavior of the IC and its security functionalities. The objective ANSSI.O.Prot-TSF-Confidentiality requires protection against disclosure of confidential operations of the Security IC through the use of a dedicated code loaded on open samples. Additionally, BSI.O.Leak-Inherent and BSI.O.Leak-Forced ensures protection against disclosure of confidential data processed in the Security IC. Therefore ANSSI.T.Open-Samples-Diffusion is covered by these three objectives. 149 The added objective for the TOE ANSSI.O.Prot-TSF-Confidentiality does not introduce any contradiction in the security objectives for the TOE. 4.3.8 TOE threat "Unauthorised data modification for MFPlus" 150 The justification related to the threat “Unauthorised data modification for MFPlus, (T.Data- Modification-MFPlus)” is as follows: 151 According to threat T.Data-Modification-MFPlus, the TOE shall avoid that user data stored by the TOE may be modified by unauthorised subjects. The objective O.Access-Control- MFPlus requires an access control mechanism that limits the ability to modify data elements stored by the TOE. O.Type-Consistency-MFPlus ensures that data types are adhered, so that data cannot be modified by abusing type-specific operations. The terminal must provide support by checking the TOE responses, which is required by OE.Terminal-Support- MFPlus. Therefore T.Data-Modification-MFPlus is covered by these three objectives. 152 The added objectives for the TOE O.Access-Control-MFPlus and O.Type-Consistency- MFPlus do not introduce any contradiction in the security objectives for the TOE. 4.3.9 TOE threat "Impersonating authorised users during authentication for MFPlus" 153 The justification related to the threat “Impersonating authorised users during authentication for MFPlus, (T.Impersonate-MFPlus)” is as follows: 154 The threat is related to the fact that an unauthorised subject may try to impersonate an authorised subject during authentication, e.g. by a man-in-the middle or replay attack. The goal of O.Authentication-MFPlus is that an authentication mechanism is implemented in the TOE that prevents these attacks. Therefore the threat is covered by O.Authentication- MFPlus. 155 The added objective for the TOE O.Authentication-MFPlus does not introduce any contradiction in the security objectives for the TOE. 4.3.10 TOE threat "Cloning for MFPlus" 156 The justification related to the threat “Cloning for MFPlus, (T.Cloning-MFPlus)” is as follows: Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 52/144 SMD_ST31G480_ST_18_002 157 The concern of T.Cloning-MFPlus is that all data stored on the TOE (including keys) may be read out in order to create a duplicate. The objectives O.Authentication-MFPlus together with O.Access-Control-MFPlus require that unauthorised users cannot read any information that is restricted to the authorised subjects. The cryptographic keys used for the authentication are stored inside the TOE protected by O.Access-Control-MFPlus. This objective states that the TOE shall never output any keys used for authentication. Therefore the two objectives cover T.Cloning-MFPlus. 4.3.11 TOE threat "MFPlus resource unavailability" 158 The justification related to the threat “MFPlus resource unavailability, (T.Application- Resource-MFPlus)” is as follows: 159 The concern of T.Application-Resource-MFPlus is to prevent denial of service or malfunction of MFPlus, that may result from an unavailability of resources. The goal of O.Resource-MFPlus is to control the availability of resources for MFPlus. Therefore the threat is covered by O.Resource-MFPlus. 160 The added objective for the TOE O.Resource-MFPlus does not introduce any contradiction in the security objectives for the TOE. 4.3.12 TOE threat "MFPlus code confidentiality" 161 The justification related to the threat “MFPlus code confidentiality, (T.Confid-Applic-Code- MFPlus)” is as follows: 162 Since O.Firewall-MFPlus requires that the TOE ensures isolation of code between MFPlus and the other applications, the code of MFPlus is protected against unauthorised disclosure, therefore T.Confid-Applic-Code-MFPlus is covered by O.Firewall-MFPlus. 163 The added objective for the TOE O.Firewall-MFPlus does not introduce any contradiction in the security objectives for the TOE. 4.3.13 TOE threat "MFPlus data confidentiality" 164 The justification related to the threat “MFPlus data confidentiality, (T.Confid-Applic-Data- MFPlus)” is as follows: 165 Since O.Firewall-MFPlus requires that the TOE ensures isolation of data between MFPlus and the other applications, the data of MFPlus is protected against unauthorised disclosure, therefore T.Confid-Applic-Data-MFPlus is covered by O.Firewall-MFPlus. 4.3.14 TOE threat "MFPlus code integrity" 166 The justification related to the threat “MFPlus code integrity, (T.Integ-Applic-Code-MFPlus)” is as follows: 167 The threat is related to the alteration of MFPlus code by an attacker. O.Verification-MFPlus requires that the TOE verifies the code integrity before its execution. Complementary, O.Firewall-MFPlus requires that the TOE ensures isolation of code between MFPlus and the other applications, thus protecting the code of MFPlus against unauthorised modification. Therefore the threat is covered by O.Verification-MFPlus together with O.Firewall-MFPlus. 168 The added objective for the TOE O.Verification-MFPlus does not introduce any contradiction in the security objectives for the TOE. ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 53/144 4.3.15 TOE threat "MFPlus data integrity" 169 The justification related to the threat “MFPlus data integrity, (T.Integ-Applic-Data-MFPlus)” is as follows: 170 The threat is related to the alteration of MFPlus data by an attacker. Since O.Firewall- MFPlus and O.Shr-Var-MFPlus require that the TOE ensures complete isolation of data between MFPlus and the other applications, the data of MFPlus is protected against unauthorised modification, therefore T.Integ-Applic-Data-MFPlus is covered by O.Firewall- MFPlus together with O.Shr-Var-MFPlus. 171 The added objective for the TOE O.Shr-Var-MFPlus does not introduce any contradiction in the security objectives for the TOE. 4.3.16 TOE threat "Unauthorised data modification for DESFire" 172 The justification related to the threat “Unauthorised data modification for DESFire, (T.Data- Modification-DESFire)” is as follows: 173 According to threat T.Data-Modification-DESFire, the TOE shall avoid that user data stored by the TOE may be modified by unauthorised subjects. The objective O.Access-Control- DESFire requires an access control mechanism that limits the ability to modify data elements stored by the TOE. O.Type-Consistency-DESFire ensures that data types are adhered, so that data cannot be modified by abusing type-specific operations. The terminal must support this by checking the TOE responses, which is required by OE.Terminal- Support-DESFire. Therefore T.Data-Modification-DESFire is covered by these three objectives. 174 The added objectives for the TOE O.Access-Control-DESFire and O.Type-Consistency- DESFire do not introduce any contradiction in the security objectives for the TOE. 4.3.17 TOE threat "Impersonating authorised users during authentication for DESFire" 175 The justification related to the threat “Impersonating authorised users during authentication for DESFire, (T.Impersonate-DESFire)” is as follows: 176 The threat is related to the fact that an unauthorised subject may try to impersonate an authorised subject during authentication, e.g. by a man-in-the middle or replay attack. The goal of O.Authentication-DESFire is that an authentication mechanism is implemented in the TOE that prevents these attacks. Therefore the threat is covered by O.Authentication- DESFire. 177 The added objective for the TOE O.Authentication-DESFire does not introduce any contradiction in the security objectives for the TOE. 4.3.18 TOE threat "Cloning for DESFire" 178 The justification related to the threat “Cloning for DESFire, (T.Cloning-DESFire)” is as follows: 179 The concern of T.Cloning-DESFire is that all data stored on the TOE (including keys) may be read out in order to create a duplicate. The objective O.Authentication-DESFire together with O.Access-Control-DESFire requires that unauthorised users can not read any information that is restricted to the authorised subjects. The cryptographic keys used for the authentication are stored inside the TOE protected. O.Access-Control-DESFire states that Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 54/144 SMD_ST31G480_ST_18_002 no keys used for authentication shall ever be output. Therefore the two objectives cover T.Cloning-DESFire. 4.3.19 TOE threat "DESFire resource unavailability" 180 The justification related to the threat “DESFire resource unavailability, (T.Resource- DESFire)” is as follows: 181 The concern of T.Resource-DESFire is to prevent denial of service or malfunction of DESFire, that may result from an unavailability of resources. The goal of O.Resource- DESFire is to control the availability of resources for DESFire. Therefore the threat is covered by O.Resource-DESFire. 182 The added objective for the TOE O.Resource-DESFire does not introduce any contradiction in the security objectives for the TOE. 4.3.20 TOE threat "DESFire code confidentiality" 183 The justification related to the threat “DESFire code confidentiality, (T.Confid-Applic-Code- DESFire)” is as follows: 184 Since O.Firewall-DESFire requires that the TOE ensures isolation of code between DESFire and the other applications, the code of DESFire is protected against unauthorised disclosure, therefore T.Confid-Applic-Code-DESFire is covered by O.Firewall-DESFire. 185 The added objective for the TOE O.Firewall-DESFire does not introduce any contradiction in the security objectives for the TOE. 4.3.21 TOE threat "DESFire data confidentiality" 186 The justification related to the threat “DESFire data confidentiality, (T.Confid-Applic-Data- DESFire)” is as follows: 187 Since O.Firewall-DESFire requires that the TOE ensures isolation of data between DESFire and the other applications, the data of DESFire is protected against unauthorised disclosure, therefore T.Confid-Applic-Data-DESFire is covered by O.Firewall-DESFire. 4.3.22 TOE threat "DESFire code integrity" 188 The justification related to the threat “DESFire code integrity, (T.Integ-Applic-Code- DESFire)” is as follows: 189 The threat is related to the alteration of DESFire code by an attacker. O.Verification- DESFire requires that the TOE verifies the code integrity before its execution. Complementary, O.Firewall-DESFire requires that the TOE ensures isolation of code between DESFire and the other applications, thus protecting the code of DESFire against unauthorised modification. Therefore the threat is covered by O.Verification-DESFire together with O.Firewall-DESFire. 190 The added objective for the TOE O.Verification-DESFire does not introduce any contradiction in the security objectives for the TOE. 4.3.23 TOE threat "DESFire data integrity" 191 The justification related to the threat “DESFire data integrity, (T.Integ-Applic-Data-DESFire)” is as follows: ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 55/144 192 The threat is related to the alteration of DESFire data by an attacker. Since O.Firewall- DESFire and O.Shr-Res-DESFire require that the TOE ensures isolation of data between DESFire and the other applications, the data of DESFire is protected against unauthorised modification, therefore T.Integ-Applic-Data-DESFire is covered by O.Firewall-DESFire together with O.Shr-Res-DESFire. 193 The added objective for the TOE O.Shr-Res-DESFire does not introduce any contradiction in the security objectives for the TOE. 4.3.24 Organisational security policy "Controlled usage to Loader Functionality" 194 The justification related to the organisational security policy "Controlled usage to Loader Functionality, (BSI.P.Ctrl-Loader)” is as follows: 195 As stated in BSI-CC-PP-0084-2014, the organisational security policy “Controlled usage to Loader Functionality (BSI.P.Ctrl-Loader) is implemented by the security objective for the TOE “Access control and authenticity for the Loader (BSI.O.Ctrl-Auth-Loader)” and the security objective for the TOE environment “Secure communication and usage of the Loader (BSI.OE.Loader-Usage)”. The security objectives “Secure loading of the Additional Code (ANSSI.O.Secure-Load- ACode)”, “Secure activation of the Additional Code (ANSSI.O.Secure-AC-Activation)”, and ”Secure identification of the TOE (ANSSI.O.TOE-Identification)” specified by ANSSI-CC- NOTE-06/2.0 EN additionally enforce this policy since they require authenticity, atomicity, identification of the loaded additional code, part of the TOE. ”Secure identification of the TOE (ANSSI.O.TOE-Identification)” is supported by the security objective for the TOE environment “TOE identification (OE.TOE-Id)”. Similarly, the security objectives “Secure loading of the Additional Memory Image (O.Secure-Load-AMemImage)”, and “Secure identification of the Memory Image (O.MemImage-Identification)”, enforce this policy since they require authenticity, atomicity, identification of the loaded additional memory image for the user data (embedded software). ”Secure identification of Memory Image (O.MemImage-Identification)” is supported by the security objective for the TOE environment “Composite TOE identification (OE.Composite- TOE-Id)”. Therefore the policy is covered by these nine objectives. 4.3.25 Organisational security policy "Additional Specific Security Functionality" 196 The justification related to the organisational security policy "Additional Specific Security Functionality, (AUG1.P.Add-Functions)” is as follows: 197 Since AUG1.O.Add-Functions requires the TOE to implement exactly the same specific security functionality as required by AUG1.P.Add-Functions, and in the very same conditions, the organisational security policy is covered by the objective. 198 Nevertheless the security objectives BSI.O.Leak-Inherent, BSI.O.Phys-Probing, , BSI.O.Malfunction, BSI.O.Phys-Manipulation and BSI.O.Leak-Forced define how to implement the specific security functionality required by AUG1.P.Add-Functions. (Note that these objectives support that the specific security functionality is provided in a secure way as expected from AUG1.P.Add-Functions.) Especially BSI.O.Leak-Inherent and BSI.O.Leak-Forced refer to the protection of confidential data (User Data or TSF data) in general. User Data are also processed by the specific security functionality required by AUG1.P.Add-Functions. Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 56/144 SMD_ST31G480_ST_18_002 199 The added objective for the TOE AUG1.O.Add-Functions does not introduce any contradiction in the security objectives for the TOE. 4.3.26 Organisational security policy "Confidentiality during communication for MFPlus" 200 The justification related to the organisational security policy "Confidentiality during communication for MFPlus, (P.Encryption)” is as follows: 201 The policy P.Encryption requires the TOE to provide the possibility to protect selected data elements from eavesdropping during contact-less communication. Since O.Encryption requires that the security attribute for a data element contains an option that the communication related to this data element must be encrypted, the objective covers the policy. 202 The added objective for the TOE O.Encryption does not introduce any contradiction in the security objectives. 4.3.27 Organisational security policy "Integrity during communication for MFPlus" 203 The justification related to the organisational security policy "Integrity during communication for MFPlus, (P.MAC)” is as follows: 204 The policy P.MAC requires the TOE to provide the possibility to protect the contactless communication from modification or injections. This includes especially the possibility to detect replay or man-in-the-middle attacks within a session. O.MAC-MFPlus requires that a security attribute for the card contains an option that the communication must be MACed. In order to ensure the security the terminal must support the TOE by checking the MAC in the TOE responses, which is the goal of the objective OE.Terminal-Support-MFPlus. Therefore both objectives cover the policy. 205 The added objective for the TOE O.MAC-MFPlus does not introduce any contradiction in the security objectives. 4.3.28 Organisational security policy "Un-traceability of end-users for MFPlus" 206 The justification related to the organisational security policy "Un-traceability of end-users for MFPlus, (P.No-Trace-MFPlus)” is as follows: 207 The policy requires that the TOE has the ability to prevent tracing of end-users. Tracing can be performed with the UID or with any freely accessible data element stored by the TOE. The objective O.No-Trace-MFPlus requires that the TOE shall provide an option to prevent the transfer of any information that is suitable for tracing an end-user by an unauthorised subject, which includes the UID. The objectives O.Authentication-MFPlus and O.Access- Control-MFPlus provide means to authorise subjects and to implement access control to data elements in a way that unauthorised subjects can not read any element usable for tracing. Therefore the policy is covered by these three objectives. 208 The added objective for the TOE O.No-Trace-MFPlus does not introduce any contradiction in the security objectives. ST31G480 E01 platform Security Target for composition Security objectives (ASE_OBJ) SMD_ST31G480_ST_18_002 57/144 4.3.29 Organisational security policy "Confidentiality during communication for DESFire" 209 The justification related to the organisational security policy "Confidentiality during communication for DESFire, (P.Confidentiality)” is as follows: 210 The policy P.Confidentiality requires the TOE to provide the possibility to protect selected data elements from eavesdropping during contact-less communication. In addition, the data transfer is protected in a way that injected and bogus commands, within the communication session before the protected data transfer, can be detected. The terminal must support this by checking the TOE responses, which is required by OE.Terminal-Support-DESFire. Since O.Confidentiality-DESFire requires that the security attribute for a data element contains an option that the communication related to this data element must be encrypted and protected, and because OE.Terminal-Support-DESFire ensures the support by the terminal, the two objectives cover the policy. 211 The added objective for the TOE O.Confidentiality-DESFire does not introduce any contradiction in the security objectives. 4.3.30 Organisational security policy "Transaction mechanism for DESFire" 212 The justification related to the organisational security policy "Transaction mechanism for DESFire, (P.Transaction)” is as follows: 213 According to this policy, the TOE shall be able to provide the possibility to combine a number of data modification operations in one transaction, so that either all operations or no operation at all is performed. This is exactly the goal of the objective O.Transaction- DESFire, therefore the policy P.Transaction is covered by O.Transaction-DESFire. 214 The added objective for the TOE O.Transaction-DESFire does not introduce any contradiction in the security objectives. 4.3.31 Organisational security policy "Un-traceability of end-users for DESFire" 215 The justification related to the organisational security policy "Un-traceability of end-users for DESFire, (P.No-Trace-DESFire)” is as follows: 216 The policy requires that the TOE has the ability to prevent tracing of end-users. Tracing can be performed with the UID or with any freely accessible data element stored by the TOE. The objective O.No-Trace-DESFire requires that the TOE shall provide an option to prevent the transfer of any information that is suitable for tracing an end-user by an unauthorised subject, which includes the UID. The objectives O.Authentication-DESFire and O.Access- Control-DESFire provide means to authorise subjects and to implement access control to data elements in a way that unauthorised subjects cannot read any element usable for tracing. Therefore the policy is covered by these three objectives. 217 The added objective for the TOE O.No-Trace-DESFire does not introduce any contradiction in the security objectives. 4.3.32 Organisational security policy "Treatment of user data" 218 The justification related to the organisational security policy "Treatment of user data, (P.Resp-Appl)” is as follows: Security objectives (ASE_OBJ) ST31G480 E01 platform Security Target for composition 58/144 SMD_ST31G480_ST_18_002 219 The policy states that the Security IC Embedded Software included in the TOE, treats user data according to the PP assumption BSI.A.Resp-Appl. O.Resp-Appl-DESFire and O.Resp- Appl-MFPlus have the same objective as BSI.OE.Resp-Appl defined in the PP. Thus, the objectives O.Resp-Appl-DESFire and/or O.Resp-Appl-MFPlus cover the policy P.Resp- Appl. 220 The added objectives for the TOE O.Resp-Appl-DESFire and O.Resp-Appl-MFPlus do not introduce any contradiction in the security objectives. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 59/144 5 Security requirements (ASE_REQ) 221 This chapter on security requirements contains a section on security functional requirements (SFRs) for the TOE (Section 5.1), a section on security assurance requirements (SARs) for the TOE (Section 5.2), a section on the refinements of these SARs (Section 5.3) as required by the "BSI-CC-PP-0084-2014" Protection Profile. This chapter includes a section with the security requirements rationale (Section 5.4). 5.1 Security functional requirements for the TOE 222 Security Functional Requirements (SFRs) from the "BSI-CC-PP-0084-2014" Protection Profile (PP) are drawn from CCMB-2017-04-002 R5, except the following SFRs, that are extensions to CCMB-2017-04-002 R5: • FCS_RNG Generation of random numbers, • FMT_LIM Limited capabilities and availability, • FAU_SAS Audit data storage, • FDP_SDC Stored data confidentiality, • FIA_API Authentication proof of identity . The reader can find their certified definitions in the text of the "BSI-CC-PP-0084-2014" Protection Profile. 223 All extensions to the SFRs of the "BSI-CC-PP-0084-2014" Protection Profiles (PPs) are exclusively drawn from CCMB-2017-04-002 R5. 224 All iterations, assignments, selections, or refinements on SFRs have been performed according to section C.4 of CCMB-2017-04-001 R5. They are easily identified in the following text as they appear as indicated here. Note that in order to improve readability, iterations are sometimes expressed within tables. 225 In order to ease the definition and the understanding of these security functional requirements, a simplified presentation of the TOE Security Policy (TSP) is given in the following section. 226 The selected security functional requirements for the TOE, their respective origin and type are summarized in Table 7. Table 7. Summary of functional security requirements for the TOE Label Title Addressing Origin Type FRU_FLT.2 Limited fault tolerance Malfunction BSI-CC-PP- 0084-2014 CCMB-2017-04-002 R5 FPT_FLS.1 Failure with preservation of secure state Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 60/144 SMD_ST31G480_ST_18_002 FMT_LIM.1 / Test Limited capabilities Abuse of Test functionality BSI-CC-PP- 0084-2014 Extended FMT_LIM.2 / Test Limited availability FAU_SAS.1 Audit storage Lack of TOE identification BSI-CC-PP- 0084-2014 Operated FDP_SDC.1 Stored data confidentiality Physical manipulation & probing FDP_SDI.2 Stored data integrity monitoring and action CCMB-2017-04-002 R5 FPT_PHP.3 Resistance to physical attack BSI-CC-PP- 0084-2014 FDP_ITT.1 Basic internal transfer protection Leakage FPT_ITT.1 Basic internal TSF data transfer protection FDP_IFC.1 Subset information flow control FCS_RNG.1 Random number generation Weak cryptographic quality of random numbers BSI-CC-PP- 0084-2014 Operated Extended FCS_COP.1 Cryptographic operation Cipher scheme support AUG #1 Operated CCMB-2017-04-002 R5 FCS_CKM.1 (if NesLib is embedded only) Cryptographic key generation Security Target Operated FDP_ACC.2 / Memories Complete access control Memory access violation Security Target Operated FDP_ACF.1 / Memories Security attribute based access control AUG #4 Operated FMT_MSA.3 / Memories Static attribute initialisation Correct operation FMT_MSA.1 / Memories Management of security attribute FMT_SMF.1 / Memories Specification of management functions Security Target Operated FIA_API.1 Authentication Proof of Identity Masquerade BSI-CC-PP- 0084-2014 Operated Extended Table 7. Summary of functional security requirements for the TOE (continued) Label Title Addressing Origin Type ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 61/144 FMT_LIM.1 / Loader Limited capabilities Abuse of Loader functionality BSI-CC-PP- 0084-2014 Operated Extended FMT_LIM.2 / Loader Limited availability FTP_ITC.1 / Loader Inter-TSF trusted channel - Loader Loader violation CCMB-2017-04-002 R5 FDP_UCT.1 / Loader Basic data exchange confidentiality - Loader FDP_UIT.1 / Loader Data exchange integrity - Loader FDP_ACC.1 / Loader Subset access control - Loader FDP_ACF.1 / Loader Security attribute based access control - Loader FMT_MSA.3 / Loader Static attribute initialisation - Loader Correct Loader operation Security Target Operated FMT_MSA.1 / Loader Management of security attribute - Loader FMT_SMR.1 / Loader Security roles - Loader FIA_UID.1 / Loader Timing of identification - Loader FIA_UAU.1 / Loader Timing of authentication - Loader FMT_SMF.1 / Loader Specification of management functions - Loader FPT_FLS.1 / Loader Failure with preservation of secure state - Loader FAU_SAR.1 / Loader Audit review - Loader Lack of TOE identification FAU_SAS.1 / Loader Audit storage - Loader Extended Table 7. Summary of functional security requirements for the TOE (continued) Label Title Addressing Origin Type Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 62/144 SMD_ST31G480_ST_18_002 FMT_SMR.1 / MFPlus Security roles MFPlus access control (if MFPlus is embedded only) Security Target Operated CCMB-2017-04-002 R5 FDP_ACC.1 / MFPlus Subset access control FDP_ACF.1 / MFPlus Security attribute based access control FMT_MSA.3 / MFPlus Static attribute initialisation FMT_MSA.1 / MFPlus Management of security attribute FMT_SMF.1 / MFPlus Specification of management functions FDP_ITC.2 / MFPlus Import of user data with security attributes FPT_TDC.1 / MFPlus Inter-TSF basic TSF data consistency FIA_UID.2 / MFPlus User identification before any action MFPlus confidentiality and authentication (if MFPlus is embedded only) FIA_UAU.2 / MFPlus User authentication before any action FIA_UAU.5 / MFPlus Multiple authentication mechanisms FMT_MTD.1 / MFPlus Management of TSF data FPT_TRP.1 / MFPlus Trusted path FCS_CKM.4 / MFPlus Cryptographic key destruction FPT_RPL.1 / MFPlus Replay detection MFPlus robustness (if MFPlus is embedded only) FPR_UNL.1 / MFPlus Unlinkability FRU_RSA.2 / MFPlus Minimum and maximum quotas MFPlus correct operation (if MFPlus is embedded only) FDP_RIP.1 / MFPlus Subset residual information protection MFPlus intrinsic confidentiality and integrity (if MFPlus is embedded only) Table 7. Summary of functional security requirements for the TOE (continued) Label Title Addressing Origin Type ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 63/144 FMT_SMR.1 / DESFire Security roles DESFire access control (if DESFire is embedded only) Security Target Operated CCMB-2017-04-002 R5 FDP_ACC.1 / DESFire Subset access control FDP_ACF.1 / DESFire Security attribute based access control FMT_MSA.3 / DESFire Static attribute initialisation FMT_MSA.1 / DESFire Management of security attribute FMT_SMF.1 / DESFire Specification of management functions FDP_ITC.2 / DESFire Import of user data with security attributes FPT_TDC.1 / DESFire Inter-TSF basic TSF data consistency FIA_UID.2 / DESFire User identification before any action DESFire confidentiality and authentication (if DESFire is embedded only) FIA_UAU.2 / DESFire User authentication before any action FIA_UAU.5 / DESFire Multiple authentication mechanisms FMT_MTD.1 / DESFire Management of TSF data FPT_TRP.1 / DESFire Trusted path FCS_CKM.4 / DESFire Cryptographic key destruction FDP_ROL.1 / DESFire Basic rollback DESFire robustness (if DESFire is embedded only) FPT_RPL.1 / DESFire Replay detection FPR_UNL.1 / DESFire Unlinkability FRU_RSA.2 / DESFire Minimum and maximum quotas DESFire correct operation (if DESFire is embedded only) Table 7. Summary of functional security requirements for the TOE (continued) Label Title Addressing Origin Type Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 64/144 SMD_ST31G480_ST_18_002 5.1.1 Security Functional Requirements from the Protection Profile Limited fault tolerance (FRU_FLT.2) 227 The TSF shall ensure the operation of all the TOE’s capabilities when the following failures occur: exposure to operating conditions which are not detected according to the requirement Failure with preservation of secure state (FPT_FLS.1). Failure with preservation of secure state (FPT_FLS.1) 228 The TSF shall preserve a secure state when the following types of failures occur: exposure to operating conditions which may not be tolerated according to the requirement Limited fault tolerance (FRU_FLT.2) and where therefore a malfunction could occur. 229 Refinements: The term “failure” above also covers “circumstances”. The TOE prevents failures for the “circumstances” defined above. Regarding application note 14 of BSI-CC-PP-0084-2014, the secure state is reached by an immediate interrupt or by a reset, depending on the current context. Regarding application note 15 of BSI-CC-PP-0084-2014, the TOE provides information on the operating conditions monitored during Security IC Embedded Software execution and after a warm reset. No audit requirement is however selected in this Security Target. FDP_RIP.1 / DESFire Subset residual information protection DESFire intrinsic confidentiality and integrity (if DESFire is embedded only) Security Target Operated CCMB-2017-04-002 R5 FDP_ACC.1 / APPLI_FWL Subset access control DESFire or MFPlus or application intrinsic confidentiality and integrity FDP_ACF.1 / APPLI_FWL Security attribute based access control FMT_MSA.3 / APPLI_FWL Static attribute initialisation FTP_ITC.1 / Sdiag Inter-TSF trusted channel - Secure Diagnostic Abuse of Secure Diagnostic functionality FAU_SAR.1 / Sdiag Audit review - Secure Diagnostic FMT_LIM.1 / Sdiag Limited capabilities - Secure Diagnostic Extended FMT_LIM.2 / Sdiag Limited availability - Secure Diagnostic Table 7. Summary of functional security requirements for the TOE (continued) Label Title Addressing Origin Type ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 65/144 Limited capabilities (FMT_LIM.1) / Test 230 The TSF shall be designed and implemented in a manner that limits their capabilities so that in conjunction with “Limited availability (FMT_LIM.2)” the following policy is enforced: Limited capability and availability Policy / Test. Limited availability (FMT_LIM.2) / Test 231 The TSF shall be designed and implemented in a manner that limits their availability so that in conjunction with “Limited capabilities (FMT_LIM.1) / Test” the following policy is enforced: Limited capability and availability Policy / Test. 232 SFP_1: Limited capability and availability Policy / Test Deploying Test Features after TOE Delivery does not allow User Data of the Composite TOE to be disclosed or manipulated, TSF data to be disclosed or manipulated, software to be reconstructed and no substantial information about construction of TSF to be gathered which may enable other attacks. Audit storage (FAU_SAS.1) 233 The TSF shall provide the test process before TOE Delivery with the capability to store the Initialisation Data and/or Pre-personalisation Data and/or supplements of the Security IC Embedded Software in the NVM. Stored data confidentiality (FDP_SDC.1) 234 The TSF shall ensure the confidentiality of the information of the user data while it is stored in all the memory areas where it can be stored. Stored data integrity monitoring and action (FDP_SDI.2) 235 The TSF shall monitor user data stored in containers controlled by the TSF for integrity errors on all objects, based on the following attributes: user data stored in all possible memory areas, depending on the integrity control attributes. 236 Upon detection of a data integrity error, the TSF shall signal the error and react. Resistance to physical attack (FPT_PHP.3) 237 The TSF shall resist physical manipulation and physical probing, to the TSF by responding automatically such that the SFRs are always enforced. 238 Refinement: The TSF will implement appropriate mechanisms to continuously counter physical manipulation and physical probing. Due to the nature of these attacks (especially manipulation) the TSF can by no means detect attacks on all of its elements. Therefore, permanent protection against these attacks is required ensuring that security functional requirements are enforced. Hence, “automatic response” means here (i)assuming that there might be an attack at any time and (ii)countermeasures are provided at any time. Basic internal transfer protection (FDP_ITT.1) 239 The TSF shall enforce the Data Processing Policy to prevent the disclosure of user data when it is transmitted between physically-separated parts of the TOE. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 66/144 SMD_ST31G480_ST_18_002 Basic internal TSF data transfer protection (FPT_ITT.1) 240 The TSF shall protect TSF data from disclosure when it is transmitted between separate parts of the TOE. 241 Refinement: The different memories, the CPU and other functional units of the TOE (e.g. a cryptographic co-processor) are seen as separated parts of the TOE. This requirement is equivalent to FDP_ITT.1 above but refers to TSF data instead of User Data. Therefore, it should be understood as to refer to the same Data Processing Policy defined under FDP_IFC.1 below. Subset information flow control (FDP_IFC.1) 242 The TSF shall enforce the Data Processing Policy on all confidential data when they are processed or transferred by the TOE or by the Security IC Embedded Software. 243 SFP_2: Data Processing Policy User Data of the Composite TOE and TSF data shall not be accessible from the TOE except when the Security IC Embedded Software decides to communicate the User Data via an external interface. The protection shall be applied to confidential data only but without the distinction of attributes controlled by the Security IC Embedded Software. Random number generation (FCS_RNG.1) 244 The TSF shall provide a physical random number generator that implements: • (PTG.2.1) A total failure test detects a total failure of entropy source immediately when the RNG has started. When a total failure is detected, no random numbers will be output. • (PTG.2.2) If a total failure of the entropy source occurs while the RNG is being operated, the RNG prevents the output of any internal random number that depends on some raw random numbers that have been generated after the total failure of the entropy source. • (PTG.2.3) The online test shall detect non-tolerable statistical defects of the raw random number sequence (i) immediately when the RNG has started, and (ii) while the RNG is being operated. The TSF must not output any random numbers before the power-up online test has finished successfully or when a defect has been detected. • (PTG.2.4) The online test procedure shall be effective to detect non-tolerable weaknesses of the random numbers soon. • (PTG.2.5) The online test procedure checks the quality of the raw random number sequence. It is triggered externally. The online test is suitable for detecting non- tolerable statistical defects of the statistical properties of the raw random numbers within an acceptable period of time. 245 The TSF shall provide octets of bits that meet • (PTG.2.6) Test procedure A does not distinguish the internal random numbers from output sequences of an ideal RNG. • (PTG.2.7) The average Shannon entropy per internal random bit exceeds 0.997. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 67/144 5.1.2 Additional Security Functional Requirements for the cryptographic services Cryptographic operation (FCS_COP.1) 246 The TSF shall perform the operations in Table 8 in accordance with a specified cryptographic algorithm in Table 8 and cryptographic key sizes of Table 8 that meet the standards in Table 8. The list of operations depends on the presence of NesLib, as indicated in Table 8 (Restrict). PKCS-1 Table 8. FCS_COP.1 iterations (cryptographic operations) Restrict Iteration label [assignment: list of cryptographic operations] [assignment: cryptographic algorithm] [assignment: cryptographic key sizes] [assignment: list of standards] None TDES * encryption * decryption - in Cipher Block Chaining (CBC) mode - in Electronic Code Book (ECB) mode Triple Data Encryption Standard (TDES)(1) 168 bits NIST SP 800-67 NIST SP 800-38A None AES * encryption (cipher) * decryption (inverse cipher) - in Cipher Block Chaining (CBC) mode - in Electronic Code Book (ECB) mode Advanced Encryption Standard 128, 192 and 256 bits FIPS PUB 197 NIST SP 800-38B NIST SP 800-38A NIST SP 800-38D NIST SP 800-38C Only if NesLib * Message authentication Code computation (CMAC) * Authenticated encryption/decryption in Galois Counter Mode (GCM) * Authenticated encryption/decryption in Counter with CBC-MAC (CCM) Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 68/144 SMD_ST31G480_ST_18_002 Only if NesLib and Nescrypt RSA * RSA public key operation * RSA private key operation without the Chinese Remainder Theorem * RSA private key operation with the Chinese Remainder Theorem * EMSA PSS and PKCS1 signature scheme coding Rivest, Shamir & Adleman’s up to 4096 bits PKCS #1 V2.1 Only if NesLib and Nescrypt ECC on Weierstra ss curves * private scalar multiplication * prepare Jacobian * public scalar multiplication * point validity check * convert Jacobian to affine coordinates * general point addition * point expansion * point compression Elliptic Curves Cryptography on GF(p) on curves in Weierstrass form up to 640 bits IEEE 1363-2000, chapter 7 IEEE 1363a-2004 * Diffie-Hellman (ECDH) key agreement computation NIST SP 800-56A * digital signature algorithm (ECDSA) generation and verification FIPS PUB 186-4 ANSI X9.62, section 7 Only if NesLib and Nescrypt ECC on Edwards curves * ed25519 generation * ed25519 verification * ed25519 point decompression Elliptic Curves Cryptography on GF(p) on curves in Edwards form, with curve 25519 256 bits EdDSA rfc EDDSA EDDSA2 Table 8. FCS_COP.1 iterations (cryptographic operations) (continued) Restrict Iteration label [assignment: list of cryptographic operations] [assignment: cryptographic algorithm] [assignment: cryptographic key sizes] [assignment: list of standards] ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 69/144 Only if NesLib SHA * SHA-1(2) * SHA-224 * SHA-256 * SHA-384 * SHA-512 * Protected SHA-1(2) * Protected SHA-256 * Protected SHA-384 * Protected SHA-512 Secure Hash Algorithm assignment pointless because algorithm has no key FIPS PUB 180-2 * HMAC using any of the above hash functions up to 256 bits FIPS PUB 198-1 Only if NesLib Keccak * SHAKE128, * SHAKE256, * SHA3-224, * SHA3-256, * SHA3-384, * SHA3-512, * Keccak[r,1600-r], * protected SHAKE128, * protected SHAKE256, * protected SHA3-224, * protected SHA3-256, * protected SHA3-384, * protected SHA3-512, * Protected Keccak[r,1600-r] Keccak no key for plain functions, variable key length up to security level for protected functions (security level is last number in function names and 1600-c for Keccak) FIPS PUB 202 Only if NesLib Keccak-p * Keccak-p[1600,n_r = 24], * Keccak-p[1600, n_r=12], * protected Keccak- p[1600,n_r = 24], * protected Keccak- p[1600, n_r=12] Keccak-p no key for plain functions, any key length up to 256 bits for protected functions FIPS PUB 202 Only if NesLib and Nescrypt Diffie- Hellman Diffie-Hellman Diffie-Hellman up to 4096 bits ANSI X9.42 Table 8. FCS_COP.1 iterations (cryptographic operations) (continued) Restrict Iteration label [assignment: list of cryptographic operations] [assignment: cryptographic algorithm] [assignment: cryptographic key sizes] [assignment: list of standards] Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 70/144 SMD_ST31G480_ST_18_002 Cryptographic key generation (FCS_CKM.1) 247 If NesLib is embedded only, the TSF shall generate cryptographic keys in accordance with a specified cryptographic key generation algorithm, in Table 9, and specified cryptographic key sizes of Table 9 that meet the following standards in Table 9. 5.1.3 Additional Security Functional Requirements for the memories protection 248 The following SFRs are extensions to "BSI-CC-PP-0084-2014" Protection Profile (PP), related to the memories protection. Static attribute initialisation (FMT_MSA.3) / Memories 249 The TSF shall enforce the Dynamic Memory Access Control Policy to provide minimally protective(b) default values for security attributes that are used to enforce the SFP. Only if NesLib DRBG * SHA-1(2) * SHA-224 * SHA-256 * SHA-384 * SHA-512 Hash-DRBG None NIST SP 800-90 FIPS PUB 180-2 *AES CTR-DRBG 128, 192 and 256 bits NIST SP 800-90 FIPS PUB 197 1. Note that triple DES with two keys is no longer recommended as encryption function in the context of smart card applications. Hence, Security IC Embedded Software may need to use triple DES with three keys to achieve a suitable strength. 2. Note that SHA-1 is no longer recommended as a cryptographic function in the context of smart card applications. Hence, Security IC Embedded Software may need to use another SHA to achieve a suitable strength. Table 8. FCS_COP.1 iterations (cryptographic operations) (continued) Restrict Iteration label [assignment: list of cryptographic operations] [assignment: cryptographic algorithm] [assignment: cryptographic key sizes] [assignment: list of standards] Table 9. FCS_CKM.1 iterations (cryptographic key generation) Iteration label [assignment: cryptographic key generation algorithm] [assignment: cryptographic key sizes] [assignment: list of standards] Prime generation prime generation and RSA prime generation algorithm, optionally protected against side channel attacks, and/or optionally with conditions up to 2048 bits FIPS PUB 140-2 FIPS PUB 186-4 RSA key generation RSA key pair generation algorithm, optionally protected against side channel attacks, and/or optionally with conditions up to 4096 bits FIPS PUB 140-2 ISO/IEC 9796-2 PKCS #1 V2.1 ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 71/144 250 The TSF shall allow none to specify alternative initial values to override the default values when an object or information is created. Application note: The security attributes are the set of access rights currently defined. They are dynamically attached to the subjects and objects locations, i.e. each logical address. Management of security attributes (FMT_MSA.1) / Memories 251 The TSF shall enforce the Dynamic Memory Access Control Policy to restrict the ability to modify the security attributes current set of access rights to software running in privileged mode. Complete access control (FDP_ACC.2) / Memories 252 The TSF shall enforce the Dynamic Memory Access Control Policy on all subjects (software), all objects (data including code stored in memories) and all operations among subjects and objects covered by the SFP. 253 The TSF shall ensure that all operations between any subject controlled by the TSF and any object controlled by the TSF are covered by an access control SFP. Security attribute based access control (FDP_ACF.1) / Memories 254 The TSF shall enforce the Dynamic Memory Access Control Policy to objects based on the following: software mode, the object location, the operation to be performed, and the current set of access rights. 255 The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: the operation is allowed if and only if the software mode, the object location and the operation matches an entry in the current set of access rights. 256 The TSF shall explicitly authorise access of subjects to objects based on the following additional rules: none. 257 The TSF shall explicitly deny access of subjects to objects based on the following additional rules: • in User configuration, any access (read, write, execute) to the OST ROM is denied, • in User configuration, any write access to the ST NVM is denied. 258 Note: It should be noted that this level of policy detail is not needed at the application level. The composite Security Target writer should describe the ES access control and information flow control policies instead. Within the ES High Level Design description, the chosen setting of IC security attributes would be shown to implement the described policies relying on the IC SFP presented here. 259 The following SFP Dynamic Memory Access Control Policy is defined for the requirement "Security attribute based access control (FDP_ACF.1) / Memories": 260 SFP_3: Dynamic Memory Access Control Policy The TSF must control read, write, execute accesses of software to data, based on the software mode and on the current set of access rights. b. See the Datasheet referenced in Section 7 for actual values. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 72/144 SMD_ST31G480_ST_18_002 Specification of management functions (FMT_SMF.1) / Memories 261 The TSF will be able to perform the following management functions: modification of the current set of access rights security attributes by software running in privileged mode, supporting the Dynamic Memory Access Control Policy. 5.1.4 Additional Security Functional Requirements related to the loading and authentication capabilities Authentication Proof of Identity (FIA_API.1) 262 The TSF shall provide a command based on a cryptographic mechanism to prove the identity of the TOE to an external entity. Limited capabilities (FMT_LIM.1) / Loader 263 The TSF shall be designed and implemented in a manner that limits its capabilities so that in conjunction with “Limited availability (FMT_LIM.2)” the following policy is enforced: Loader Limited capability Policy. 264 SFP_4: Loader Limited capability Policy 265 Deploying Loader functionality after delivery does not allow stored user data to be disclosed or manipulated by unauthorized user. Limited availability (FMT_LIM.2) / Loader 266 The TSF shall be designed and implemented in a manner that limits its availability so that in conjunction with “Limited capabilities (FMT_LIM.1)” the following policy is enforced: Loader Limited availability Policy. 267 SFP_5: Loader Limited availability Policy 268 The TSF prevents deploying the Loader functionality after blocking of the loader. 269 Note: Blocking the loader is just an option. Inter-TSF trusted channel (FTP_ITC.1) / Loader 270 The TSF shall provide a communication channel between itself and another trusted IT product that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from modification or disclosure. 271 The TSF shall permit another trusted IT product to initiate communication via the trusted channel. 272 The TSF shall initiate communication via the trusted channel for Maintenance transaction. 273 Refinement: In practice, the communication is not initiated by the TSF. Basic data exchange confidentiality (FDP_UCT.1) / Loader 274 The TSF shall enforce the Loader SFP to receive user data in a manner protected from unauthorized disclosure. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 73/144 Data exchange integrity (FDP_UIT.1) / Loader 275 The TSF shall enforce the Loader SFP to receive user data in a manner protected from modification, deletion, insertion errors. 276 The TSF shall be able to determine on receipt of user data, whether modification, deletion, insertion has occurred. Subset access control (FDP_ACC.1) / Loader 277 The TSF shall enforce the Loader SFP on: • the subjects ST Loader, User Loader, and Delegated Loader, • the objects user data in User NVM and ST data in ST NVM, • the operation Maintenance transaction. Security attribute based access control (FDP_ACF.1) / Loader 278 The TSF shall enforce the Loader SFP to objects based on the following: all subjects, objects and attributes defined in the Loader SFP. 279 The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: if the user authenticated role is allowed to perform the maintenance transaction and the maintenance transaction is legitimate and the loaded data emanates from an authorized originator. Note that the term “data” also addresses Additional Code, as this code is seen as data by the TSF. 280 The TSF shall explicitly authorize access of subjects to objects based on the following additional rules: none. 281 The TSF shall explicitly deny access of subjects to objects based on the following additional rules: none. 282 The following SFP Loader SFP is defined for the requirements “Basic data exchange confidentiality (FDP_UCT.1) / Loader”, “Data exchange integrity (FDP_UIT.1) / Loader”, “Subset access control (FDP_ACC.1) / Loader”, "Security attribute based access control (FDP_ACF.1) / Loader", "Static attribute initialisation (FMT_MSA.3) / Loader", and "Management of security attributes (FMT_MSA.1) / Loader": 283 SFP_6: Loader SFP 284 The TSF must enforce that a maintenance transaction is performed if and only if the user authenticated role is allowed to perform the maintenance transaction and the maintenance transaction is legitimate and the loaded data emanates from an authorized originator. The TSF ruling is done according to a fixed access rights matrix, based on the subject, object and security attributes listed below. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 74/144 SMD_ST31G480_ST_18_002 The Security Function Policy (SFP) Loader SFP uses the following definitions: • the subjects are the ST Loader, the User Loader, and the Delegated Loader, • the objects are ST NVM and User NVM, • the operation is Maintenance transaction, • the security attributes linked to the subjects are the remaining sessions, the number of consecutive authentication failures, the allowed memory areas, the logging capacity, the transaction identification. Note that subjects are authorized by cryptographic keys. These keys are considered as authentication data and not as security attributes. Failure with preservation of secure state (FPT_FLS.1) / Loader 285 The TSF shall preserve a secure state when the following types of failures occur: the maintenance transaction is incomplete. Static attribute initialisation (FMT_MSA.3) / Loader 286 The TSF shall enforce the Loader SFP to provide restrictive default values for security attributes that are used to enforce the SFP. 287 The TSF shall allow none to specify alternative initial values to override the default values when an object or information is created. Management of security attributes (FMT_MSA.1) / Loader 288 The TSF shall enforce the Loader SFP to restrict the ability to modify the security attributes remaining sessions, transaction identification to the ST Loader or User Loader. Specification of management functions (FMT_SMF.1) / Loader 289 The TSF will be able to perform the following management functions: change the role authentication data, change the remaining sessions, block a role, under the Loader SFP. Security roles (FMT_SMR.1) / Loader 290 The TSF shall maintain the roles: ST Loader, User Loader, Delegated Loader, Secure Diagnostic, and Everybody. 291 The TSF shall be able to associate users with roles. Timing of identification (FIA_UID.1) / Loader 292 The TSF shall allow boot, authentication command and non-critical queries on behalf of the user to be performed before the user is identified. 293 The TSF shall require each user to be successfully identified before allowing any other TSF mediated actions on behalf of that user. Timing of authentication (FIA_UAU.1) / Loader 294 The TSF shall allow boot, authentication command and non-critical queries on behalf of the user to be performed before the user is authenticated. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 75/144 295 The TSF shall require each user to be successfully authenticated before allowing any other TSF mediated actions on behalf of that user. Audit storage (FAU_SAS.1) / Loader 296 The TSF shall provide the Loader with the capability to store the transaction identification of the loaded data in the NVM. 297 Refinement: The TSF shall systematically store the transaction identification provided by the ST Loader or User Loader together with the loaded data. Audit review (FAU_SAR.1) / Loader 298 The TSF shall provide Everybody with the capability to read the Product information and the Identification of the last completed maintenance transaction, if any, from the audit records. 299 The TSF shall provide the audit records in a manner suitable for the user to interpret the information. 5.1.5 Additional Security Functional Requirements related to the Secure Diagnostic capabilities Limited capabilities (FMT_LIM.1) / Sdiag 300 The TSF shall be designed and implemented in a manner that limits its capabilities so that in conjunction with “Limited availability (FMT_LIM.2)” the following policy is enforced: Sdiag Limited Capability Policy. 301 SFP_7: Sdiag Limited Capability Policy 302 Deploying Secure Diagnostic capability does not allow stored user data of the Composite TOE to be disclosed or manipulated, TSF data to be disclosed or manipulated, software to be reconstructed and no substantial information about construction of TSF to be gathered which may enable other attacks. Limited availability (FMT_LIM.2) / Sdiag 303 The TSF shall be designed and implemented in a manner that limits its availability so that in conjunction with “Limited capabilities (FMT_LIM.1)” the following policy is enforced: Sdiag Limited Availability Policy. 304 SFP_8: Sdiag Limited Availability Policy 305 The TSF prevents deploying the Secure Diagnostic capability unless the Secure Diagnostic mode is explicitly enabled by the authorized user. When the Secure Diagnostic capability is deployed, the TSF allows performing only authorized and authentic diagnostic transactions. 306 Refinement: By enabling the Secure Diagnostic capability, the Composite Product Manufacturer gives authority to the IC manufacturer to exercise the Secure Diagnostic capability known to abide by SFP_7. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 76/144 SMD_ST31G480_ST_18_002 Inter-TSF trusted channel (FTP_ITC.1) / Sdiag 307 The TSF shall provide a communication channel between itself and another trusted IT product that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from modification or disclosure. 308 The TSF shall permit another trusted IT product to initiate communication via the trusted channel. 309 The TSF shall initiate communication via the trusted channel for Secure Diagnostic transaction. 310 Refinement: In practice, the communication is initiated by the trusted IT product. Audit review (FAU_SAR.1) / Sdiag 311 The TSF shall provide Everybody with the capability to read the Secure Diagnostic enable status, from the audit records. 5.1.6 The TSF shall provide the audit records in a manner suitable for the user to interpret the information. 5.1.7 Additional Security Functional Requirements related to MFPlus 312 The following SFRs are extensions to "BSI-CC-PP-0084-2014" Protection Profile (PP), related to the capabilities and protections of MFPlus. 313 They are only valid in case MFPlus is embedded. 314 Note: MIFARE Plus X library directly relies upon the following IC SFRs: • FRU_FLT.2 in providing services as part of the security countermeasures implemented in the library, • FPT_FLS.1 in order to generate a software reset and check the code integrity in NVM, • FCS_RNG.1 for the provision of random numbers, • FCS_COP.1 / AES for AES cryptographic operations. 315 It also relies upon the other SFRs (except those of NesLib), which provide general low level security mechanisms. Security roles (FMT_SMR.1) / MFPlus 316 The TSF shall maintain the roles Personaliser, Card Administrator, Card Manager, Card Security Level Manager, Card User and Originality Key User. 317 The TSF shall be able to associate users with roles. Subset access control (FDP_ACC.1) / MFPlus 318 The TSF shall enforce the MFPlus Access Control Policy on all subjects, objects, operations and attributes defined by the MFPlus Access Control Policy. Security attribute based access control (FDP_ACF.1) / MFPlus 319 The TSF shall enforce the MFPlus Access Control Policy to objects based on the following: all subjects, objects and attributes. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 77/144 320 The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: • The Personaliser can change all blocks. • For every sector the Card User can read or write a data block; read, increase, decrease, transfer or restore a value based on the access control settings in the respective sector trailer. 321 The TSF shall explicitly authorise access of subjects to objects based on the following additional rules: none 322 The TSF shall explicitly deny access of subjects to objects based on the rules: • The block 0 (first block of the first sector) can not be modified. 323 The following SFP MFPlus Access Control Policy is defined for the requirement "Security attribute based access control (FDP_ACF.1) / MFPlus": 324 SFP_9: MFPlus Access Control Policy The Security Function Policy (SFP) MFPlus Access Control Policy uses the following definitions: The following roles are supported: • The Personaliser who can personalise the TOE. • The Card Administrator who can change security attributes which do not require being changed in the field. • The Card Manager who can change security attributes which may require being changed in the field. • The Card Security Level Manager who can switch the card to a higher security level. • The Card User who can perform operations with blocks. • The Originality Key User who can authenticate himself to prove the authenticity of the Card. Note that multiple subjects may have the same role, e.g. for every sector there are two Card Users (identified by the respective "Key A" and "Key B" for this sector). The assigned rights to the Card Users can be different, which allows having more or less powerful Card Users. There are also more than one Originality Key User and Card Security Level Manager. Any other subject belongs to the role Anybody which is not modelled explicitly in the policy because no access rights are granted to this role. This role includes the card holder (i.e. end-user) and any other subject e.g. an attacker. The objects are: • blocks that are grouped in sectors. Each sector consists of either 4 or 16 blocks. One block of each sector contains the access conditions and is called Sector Trailer. One specific type of data stored in a block is a value. The operations that can be performed with the objects are: • read data from a block, • write data to a block, • increase, decrease, transfer or restore a value and • read or modify the security attributes. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 78/144 SMD_ST31G480_ST_18_002 The security attributes are: • the MFP Configuration Block, • the Field Configuration Block, • the sector trailer for a sector and • the security level of the TOE. Note that subjects are authorised by cryptographic keys. These keys are considered as authentication data and not as security attributes. The TOE stores a dedicated cryptographic key for every subject. The key of the Card Administrator is called "Card Master Key" and the key for the Card Manager is called "Card Configuration Key". The Card Security Level Manager keys are called "Level 2 Switch Key" and "Level 3 Switch Key". The keys of the Card Users are called "AES Sector Keys". Since there are two keys for every sector the keys are called "AES Sector Key A" and "AES Sector Key B" or in short "Key A" and "Key B". The keys of the Originality Key User are called "Originality Keys". Implications of the MFPlus Access Control Policy: The MFPlus Access Control Policy has some implications, that can be drawn from the policy and that are essential parts of the TOE security functions. • The TOE end-user does normally not belong to the group of authorised users (Card Administrator, Card Manager, Card Security Level Manager, Card User, Originality Key User), but is regarded as ‘Anybody’ by the TOE. This means that the TOE cannot determine if it is used by its intended end-user (in other words: it cannot determine if the current card holder is the owner of the card). • The Personaliser is very powerful, although the role is limited to Security Level 0. The Personaliser can write all blocks and therefore change all data and the sector trailers. • Switching of the security level is an integral part of the TOE security. The TOE is switched from security level 0 to security level 1 or 3 at the end of the personalisation phase. The security level can be increased by the Card Security Level Manager afterwards. Static attribute initialisation (FMT_MSA.3) / MFPlus 325 The TSF shall enforce the MFPlus Access Control Policy to provide permissive default values for security attributes that are used to enforce the SFP. 326 The TSF shall allow no subject to specify alternative initial values to override the default values when an object or information is created. Management of security attributes (FMT_MSA.1) / MFPlus 327 The TSF shall enforce the MFPlus Access Control Policy to restrict the ability to modify the security attributes MFP Configuration Block, Field Configuration Block, security level and sector trailers to the Card Administrator, Card Manager, Card Security Level Manager and Card User, respectively. Specification of Management Functions (FMT_SMF.1) / MFPlus 328 The TSF shall be capable of performing the following security management functions: • Authenticate a user, • Invalidating the current authentication state based on the functions: Issuing a request for authentication, Occurrence of any error during the execution of a ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 79/144 command, Reset, Switching the security level of the TOE, DESELECT according to ISO 14443-3, explicit authentication request; • Finishing the personalisation phase by explicit request of the Personaliser, • Changing a security attribute. • Selection and Deselection of the virtual card. Import of user data with security attributes (FDP_ITC.2) / MFPlus 329 The TSF shall enforce the MFPlus Access Control Policy when importing user data, controlled under the SFP, from outside of the TOE. 330 The TSF shall use the security attributes associated with the imported user data. 331 The TSF shall ensure that the protocol used provides for the unambiguous association between the security attributes and the user data received. 332 The TSF shall ensure that interpretation of the security attributes of the imported user data is as intended by the source of the user data. 333 The TSF shall enforce the following rules when importing user data controlled under the SFP from outside the TOE: no additional rules. Inter-TSF basic TSF data consistency (FPT_TDC.1) / MFPlus 334 The TSF shall provide the capability to consistently interpret data blocks when shared between the TSF and another trusted IT product. 335 The TSF shall use the rules: data blocks can always be modified by the write operation. If a data block is in the value format it can be modified by all dedicated value-specific operations honouring the value-specific boundaries. Sector trailers must have a specific format when interpreting the TSF data from another trusted IT product. Application note: The TOE does not interpret the contents of the data, e.g. it cannot determine if data stored in a specific block is an identification number that adheres to a specific format. Instead, the TOE distinguishes different types of blocks and ensures that type-specific boundaries cannot be violated, e.g. values do not overflow. For sector trailers the TOE enforces a specific format. Cryptographic key destruction (FCS_CKM.4) / MFPlus 336 The TSF shall destroy cryptographic keys in accordance with a specified cryptographic key destruction method overwriting of memory that meets the following: none. User identification before any action (FIA_UID.2) / MFPlus 337 The TSF shall require each user to be successfully identified before allowing any other TSF- mediated actions on behalf of that user. Application note: Identification of a user is performed upon an authentication request based on the key block number. For example, if an authentication request for key number 0x9000 is issued after selecting the Card, the user is identified as the Card Administrator. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 80/144 SMD_ST31G480_ST_18_002 User authentication before any action (FIA_UAU.2) / MFPlus 338 The TSF shall require each user to be successfully authenticated before allowing any other TSF-mediated actions on behalf of that user. Multiple authentication mechanisms (FIA_UAU.5) / MFPlus 339 The TSF shall provide ‘none’ and cryptographic authentication to support user authentication. 340 The TSF shall authenticate any user's claimed identity according to the following rules: • The ‘none’ authentication is performed with anyone who communicates with the TOE in security level 0. The ‘none’ authentication implicitly and solely authorises the Personaliser subject. • The cryptographic authentication is used in security level 0 to authenticate the Originality Key User. • The cryptographic authentication is used in security level 1 to authenticate the Originality Key User and the Card Security Level Manager. • The cryptographic authentication is used in security level 2 to authenticate the Originality Key User, Card Administrator, Card Manager and the Card Security Level Manager. • The cryptographic authentication is used in security level 3 to authenticate the Originality Key User, Card Administrator, Card Manager and the Card User. Management of TSF data (FMT_MTD.1) / MFPlus 341 The TSF shall restrict the ability to modify the security attributes and authentication data to the Personaliser, Card Administrator, Card Manager, Card Security Level Manager and Card User. 342 Refinement: The detailed management abilities are: • The Personaliser can change all security attributes as well as all keys except the keys of the Originality Key User. • The Card Administrator can change the MFP Configuration Block, the Card Master Key and the Level 3 Switch Key. The latter only in Security Level 2. • The Card Manager can change the Field Configuration Block and the Card Configuration Key. • The Card Security Level Manager can switch the security level of the TOE to a higher level. • The Card User may change the AES Sector Keys and the sector trailer if the access conditions in the corresponding sector trailer grants him this right. Trusted path (FTP_TRP.1) / MFPlus 343 The TSF shall provide a communication path between itself and remote users that is logically distinct from other communication paths and provides assured identification of its end points and protection of the communicated data from modification or disclosure. 344 The TSF shall permit remote users to initiate communication via the trusted path. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 81/144 345 The TSF shall require the use of the trusted path for authentication requests, confidentiality and/or data integrity verification for data transfers based on a setting in the MFP Configuration Block. Replay detection (FPT_RPL.1) / MFPlus 346 The TSF shall detect replay for the following entities: authentication requests, confidentiality and/or data integrity verification for data transfers based on a setting in the MFP Configuration Block. 347 The TSF shall perform rejection of the request when replay is detected. Unlinkability (FPR_UNL.1) / MFPlus 348 The TSF shall ensure that unauthorised subjects other than the card holder are unable to determine whether any operation of the TOE were caused by the same user. Minimum and maximum quotas (FRU_RSA.2) / MFPlus 349 The TSF shall enforce maximum quotas of the following resources NVM and RAM that subjects can use simultaneously. 350 The TSF shall ensure the provision of minimum quantity of the NVM and the RAM that is available for subjects to use simultaneously. Application note: The subjects addressed here are MFPlus, and all other applications running on the TOE. The goal is to ensure that MFPlus always have enough NVM and RAM for its own usage. Subset residual information protection (FDP_RIP.1) / MFPlus 351 The TSF shall ensure that any previous information content of a resource is made unavailable upon the deallocation of the resource from the following objects: MFPlus. 5.1.8 Additional Security Functional Requirements related to DESFire 352 The following SFRs are extensions to "BSI-CC-PP-0084-2014" Protection Profile (PP), related to the capabilities and protections of DESFire. 353 They are only valid in case DESFire is embedded. 354 Note: MIFARE DESFire EV1 library directly relies upon the following IC SFRs: • FRU_FLT.2 in providing services as part of the security countermeasures implemented in the library, • FPT_FLS.1 in order to generate a software reset, • FCS_RNG.1 for the provision of random numbers, • FCS_COP.1 / TDES for DES cryptographic operations, • FCS_COP.1 / AES for AES cryptographic operations. 355 It also relies upon the other SFRs (except those of NesLib), which provide general low level security mechanisms. Security roles (FMT_SMR.1) / DESFire 356 The TSF shall maintain the roles Administrator, Application Manager, Application User and Everybody. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 82/144 SMD_ST31G480_ST_18_002 357 The TSF shall be able to associate users with roles. 358 Note: Based on the definition, Nobody is not considered as a role. Subset access control (FDP_ACC.1) / DESFire 359 The TSF shall enforce the DESFire Access Control Policy on all subjects, objects, operations and attributes defined by the DESFire Access Control Policy. Security attribute based access control (FDP_ACF.1) / DESFire 360 The TSF shall enforce the DESFire Access Control Policy to objects based on the following: all subjects, objects and attributes. 361 The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: • The Administrator can create and delete applications. • The Application Manager of an application can delete this application, create data files and values within this application, delete data files and values within this application. • An Application User can read or write a data file; read, increase or decrease a value based on the access control settings in the respective file attribute. 362 The TSF shall explicitly authorise access of subjects to objects based on the following additional rules: • Everybody can create applications if this is allowed by a specific card attribute. • Everybody can create and delete data files or values of a specific application if this is allowed by a specific application attribute. • Everybody can read or write a data file; read, increase or decrease a value if this is allowed by a specific file attribute. 363 The TSF shall explicitly deny access of subjects to objects based on the following additional rules: • Nobody can read or write a data file; read, increase or decrease a value if this is explicitly set for the respective operation on the respective data file or value. 364 The following SFP DESFire Access Control Policy is defined for the requirement "Security attribute based access control (FDP_ACF.1) / DESFire": 365 SFP_10: DESFire Access Control Policy The Security Function Policy (SFP) DESFire Access Control Policy uses the following definitions: The subjects are: • The Administrator i.e. the subject that owns or has access to the card master key. • The Application Manager i.e. the subject that owns or has access to an application master key. Note that the TOE supports multiple applications and therefore multiple Application Managers, however for one application there is only one Application Manager. • The Application User i.e. the subject that owns or has access to a key that allows to perform operations with application objects. Note that the TOE supports multiple ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 83/144 Application Users within each application and the assigned rights to the Application Users can be different, which allows to have more or less powerful Application Users. • Any other subject belongs to the role Everybody. This includes the card holder (i.e. end-user) and any other subject e.g. an attacker. These subjects do not possess any key and can not perform operations that are restricted to the Administrator, Application Manager and Application User. • The term Nobody will be used to explicitly indicate that no rights are granted to any subject. The objects are: • The Card itself. • The card can store a number of Applications. • An application can store a number of Data Files of different types. • One specific type of data file are Values. Note that data files and values can be grouped in standard files and backup files, with values belonging to the group of backup files. When the term “file” is used without further information then both data files and values are meant. The operations that can be performed with the objects are: • read a value or data from a data file, • write data to a data file, • increase a value (with a limit or unlimited), • decrease a value, • create an application, a value or a data file, • delete an application, a value or a data file and • modify attribute of the card, an application, a value or a data file. Note that ‘freeze’ will be used as specific form of modification that prevents any further modify. The security attributes are: • Attributes of the card, applications, values and data files. There is a set of attributes for the card, a set of attributes for every application and a set of attributes for every single file within an application. The term “card attributes” will be used for the set of attributes related to the card, the term “application attributes” will be used for the set of application attributes and the term “file attributes” will be used for the attributes of values and data files. Note that subjects are authorised by cryptographic keys. These keys are considered as authentication data and not as security attributes. The card has a card master key. Every application has an application master key and a variable number of keys used for operations on data files or values (all these keys are called application keys). The application keys within an application are numbered. Implications of the DESFire Access Control Policy: The DESFire Access Control Policy has some implications, that can be drawn from the policy and that are essential parts of the TOE security functions. • The TOE end-user does normally not belong to the group of authorised users (Administrator, Application Manager, Application User), but regarded as ‘Everybody’ by the TOE. This means that the TOE cannot determine if it is used by its intended end- Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 84/144 SMD_ST31G480_ST_18_002 user (in other words: it cannot determine if the current card holder is the owner of the card). • The Administrator can have the exclusive right to create and delete applications on the Smart Card, however he can also grant this privilege to Everybody. Additionally, changing the Smart Card attributes is reserved for the Administrator. Application keys, at delivery time should be personalized to a preliminary, temporary key only known to the Administrator and the Application Manager. • At application personalization time, the Application Manager uses the preliminary application key in order to personalize the application keys, whereas all keys, except the application master key, can be personalized to a preliminary, temporary key only known to the Application Manager and the Application User. Furthermore, the Application Manager has the right to create files within his application scope. Static attribute initialisation (FMT_MSA.3) / DESFire 366 The TSF shall enforce the DESFire Access Control Policy to provide permissive default values for security attributes that are used to enforce the SFP. 367 The TSF shall allow no subject to specify alternative initial values to override the default values when an object or information is created. 368 Application note: The only initial attributes are the card attributes. All other attributes have to be defined at the same time the respective object is created. Management of security attributes (FMT_MSA.1) / DESFire 369 The TSF shall enforce the DESFire Access Control Policy to restrict the ability to modify or freeze the security attributes card attributes, application attributes and file attributes to the Administrator, Application Manager and Application User, respectively. 370 Refinement: The detailed management abilities are: • The Administrator can modify the card attributes. The card attributes contain a flag that when set will prevent any further change of the card attributes, thereby allowing to freeze the card attributes. • The Application Manager can modify the application attributes. The application attributes contain a flag that when set will prevent any further change of the application attributes, thereby allowing to freeze the application attributes. • The Application Manager can decide to restrict the ability to modify the file attributes to the Application Manager, an Application User, Everybody or to Nobody. The restriction to Nobody is equivalent to freezing the file attributes. • As an implication of the last rule, any subject that receives the modify abilities from the Application Manger gets these abilities transferred. • The implication given in the previous rule includes the possibility for an Application User to modify the file attributes if the Application Manager decides to transfer this ability. If there is no such explicit transfer an Application User does not have the ability to modify the file attributes. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 85/144 Specification of Management Functions (FMT_SMF.1) / DESFire 371 The TSF shall be capable of performing the following security management functions: • Authenticating a user, • Invalidating the current authentication state based on the functions: Selecting an application or the card, Changing a key, Occurrence of any error during the execution of a command, Reset, • Changing a security attribute, • Creating or deleting an application, a value or a data file. Import of user data with security attributes (FDP_ITC.2) / DESFire 372 The TSF shall enforce the DESFire Access Control Policy when importing user data, controlled under the SFP, from outside of the TOE. 373 The TSF shall use the security attributes associated with the imported user data. 374 The TSF shall ensure that the protocol used provides for the unambiguous association between the security attributes and the user data received. 375 The TSF shall ensure that interpretation of the security attributes of the imported user data is as intended by the source of the user data. 376 The TSF shall enforce the following rules when importing user data controlled under the SFP from outside the TOE: no additional rules. Inter-TSF basic TSF data consistency (FPT_TDC.1) / DESFire 377 The TSF shall provide the capability to consistently interpret data files and values when shared between the TSF and another trusted IT product. 378 The TSF shall use the rule: data files or values can only be modified by their dedicated type-specific operations honouring the type-specific boundaries when interpreting the TSF data from another trusted IT product. Application note: The TOE does not interpret the contents of the data, e.g. it can not determine if data stored in a specific data file is an identification number that adheres to a specific format. Instead the TOE distinguishes different types of files and ensures that type-specific boundaries can not be violated, e.g. values do not overflow, single records are limited by their size and cyclic records are handled correctly. Cryptographic key destruction (FCS_CKM.4) / DESFire 379 The TSF shall destroy cryptographic keys in accordance with a specified cryptographic key destruction method overwriting of memory that meets the following: none. User identification before any action (FIA_UID.2) / DESFire 380 The TSF shall require each user to be successfully identified before allowing any other TSF- mediated actions on behalf of that user. Application note: Identification of a user is performed upon an authentication request based on the currently selected context and the key number. For example, if an authentication request for key number 0 is issued after selecting a specific application, the user is identified as the Application Manager of the respective application. Before any authentication request is issued, the user is identified as ‘Everybody’. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 86/144 SMD_ST31G480_ST_18_002 User authentication before any action (FIA_UAU.2) / DESFire 381 The TSF shall require each user to be successfully authenticated before allowing any other TSF-mediated actions on behalf of that user. Multiple authentication mechanisms (FIA_UAU.5) / DESFire 382 The TSF shall provide ‘none’ and cryptographic authentication to support user authentication. 383 The TSF shall authenticate any user's claimed identity according to the following rules: • The ‘none’ authentication is performed with anyone who communicates with the TOE without issuing an explicit authentication request. The ‘none’ authentication implicitly and solely authorises the ‘Everybody’ subject. • The cryptographic authentication is used to authorise the Administrator, Application Manager and Application User. Management of TSF data (FMT_MTD.1) / DESFire 384 The TSF shall restrict the ability to change_default, modify or freeze the card master key, application master keys and application keys to the Administrator, Application Manager and Application User. 385 Refinement: The detailed management abilities are: • The Administrator can modify the card master key. The card attributes contain a flag that when set will prevent any further change of the card master key, thereby allowing to freeze the card master key. • The Administrator can change the default key that is used for the application master key and for the application keys when an application is created. • The Application Manager of an application can modify the application master key of this application. The application attributes contain a flag that when set will prevent any further change of the application master key, thereby allowing to freeze the application master key. • The Application Manager can decide to restrict the ability to modify the application keys to the Application Manager, the Application Users or to Nobody. The restriction to Nobody is equivalent to freezing the application keys. The Application Users can either change their own keys or one Application User can be defined that can change all keys of the Application Users within an application. • As an implication of the last rule, any subject that receives the modify abilities from the Application Manager gets these abilities transferred. Trusted path (FTP_TRP.1) / DESFire 386 The TSF shall provide a communication path between itself and remote users that is logically distinct from other communication paths and provides assured identification of its end points and protection of the communicated data from modification or disclosure. 387 The TSF shall permit remote users to initiate communication via the trusted path. 388 The TSF shall require the use of the trusted path for authentication requests with DES and AES, confidentiality and/or data integrity verification for data transfers protected with AES and based on a setting in the file attributes. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 87/144 Basic rollback (FDP_ROL.1) / DESFire 389 The TSF shall enforce the DESFire Access Control Policy to permit the rollback of the operations that modify the value or data file objects on the backup files. 390 The TSF shall permit operations to be rolled back within the scope of the current transaction, which is defined by the following limitative events: chip reset, (re-) authentication (either successful or not), select command, explicit commit, explicit abort, command failure. Replay detection (FPT_RPL.1) / DESFire 391 The TSF shall detect replay for the following entities: authentication requests with DES and AES, confidentiality and/or data integrity verification for data transfers protected with AES and based on a setting in the file attributes. 392 The TSF shall perform rejection of the request when replay is detected. Unlinkability (FPR_UNL.1) / DESFire 393 The TSF shall ensure that unauthorised subjects other than the card holder are unable to determine whether any operation of the TOE were caused by the same user. Minimum and maximum quotas (FRU_RSA.2) / DESFire 394 The TSF shall enforce maximum quotas of the following resources NVM and RAM that subjects can use simultaneously. 395 The TSF shall ensure the provision of minimum quantity of the NVM and the RAM that is available for subjects to use simultaneously. Application note: The subjects addressed here are DESFire, and all other applications running on the TOE. The goal is to ensure that DESFire always have enough NVM and RAM for its own usage. Subset residual information protection (FDP_RIP.1) / DESFire 396 The TSF shall ensure that any previous information content of a resource is made unavailable upon the deallocation of the resource from the following objects: DESFire. 5.1.9 Additional Security Functional Requirements common to DESFire and MFPlus Subset access control (FDP_ACC.1) / APPLI_FWL 397 The TSF shall enforce the Protected Application Firewall Access Control Policy on the Protected Application code and data. Security attribute based access control (FDP_ACF.1) / APPLI_FWL 398 The TSF shall enforce the Protected Application Firewall Access Control Policy to objects based on the following: Protected Application code and data. 399 The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: An application cannot read, write, compare any piece of data or code belonging to the Protected Application. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 88/144 SMD_ST31G480_ST_18_002 400 The TSF shall explicitly authorise access of subjects to objects based on the following additional rules: None. 401 The TSF shall explicitly deny access of subjects to objects based on the following additional rules: • Another application cannot read, write, compare any piece of data or code belonging to the Protected Application. 402 The following SFP Protected Application Firewall Access Control Policy is defined for the requirement "Security attribute based access control (FDP_ACF.1) / APPLI_FWL": 403 SFP_11: Protected Application Firewall Access Control Policy 404 Another application cannot read, write, compare any piece of data or code belonging to the Protected Application. Application Note: One only application can be protected by the LPU. DESFire and/or MFPlus is the only Protected Application, when they are embedded. Static attribute initialisation (FMT_MSA.3) / APPLI_FWL 405 The TSF shall enforce the Protected Application Firewall Access Control Policy to provide restrictive default values for security attributes that are used to enforce the SFP. 406 The TSF shall allow no subject to specify alternative initial values to override the default values when an object or information is created. 5.2 TOE security assurance requirements 407 Security Assurance Requirements for the TOE for the evaluation of the TOE are those taken from the Evaluation Assurance Level 5 (EAL5) and augmented by taking the following components: • ADV_IMP.2, ADV_TDS.5, ALC_CMC.5, ALC_DVS.2, ALC_FLR.1, ALC_TAT.3, ASE_TSS.2 and AVA_VAN.5. 408 Regarding application note 21 of BSI-CC-PP-0084-2014, the continuously increasing maturity level of evaluations of Security ICs justifies the selection of a higher-level assurance package. 409 The component ALC_FLR.1 is chosen as an augmentation in this ST because a solid flaw management is key for the continuous improvement of the security IC platforms, especially on markets which need highly resistant and long lasting products. 410 The component ASE_TSS.2 is chosen as an augmentation in this ST to give architectural information on the security functionality of the TOE. 411 The set of security assurance requirements (SARs) is presented in Table 10, indicating the origin of the requirement. Table 10. TOE security assurance requirements Label Title Origin ADV_ARC.1 Security architecture description EAL5/BSI-CC-PP-0084-2014 ADV_FSP.5 Complete semi-formal functional specification with additional error information EAL5 ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 89/144 5.3 Refinement of the security assurance requirements 412 As BSI-CC-PP-0084-2014 defines refinements for selected SARs, these refinements are also claimed in this Security Target. 413 The main customizing is that the IC Dedicated Software is an operational part of the TOE after delivery, although it is mainly not available to the user. 414 Regarding application note 22 of BSI-CC-PP-0084-2014, the refinements for all the assurance families have been reviewed for the hierarchically higher-level assurance components selected in this Security Target, and a refinement on ADV_SPM has been added. ADV_IMP.2 Complete mapping of the implementation representation of the TSF Security Target ADV_INT.2 Well-structured internals EAL5 ADV_TDS.5 Complete semiformal modular design Security Target AGD_OPE.1 Operational user guidance EAL5/BSI-CC-PP-0084-2014 AGD_PRE.1 Preparative procedures EAL5/BSI-CC-PP-0084-2014 ALC_CMC.5 Advanced support Security Target ALC_CMS.5 Development tools CM coverage EAL5 ALC_DEL.1 Delivery procedures EAL5/BSI-CC-PP-0084-2014 ALC_DVS.2 Sufficiency of security measures BSI-CC-PP-0084-2014 ALC_FLR.1 Basic flaw remediation Security Target ALC_LCD.1 Developer defined life-cycle model EAL5/BSI-CC-PP-0084-2014 ALC_TAT.3 Compliance with implementation standards - all parts Security Target ASE_CCL.1 Conformance claims EAL5/BSI-CC-PP-0084-2014 ASE_ECD.1 Extended components definition EAL5/BSI-CC-PP-0084-2014 ASE_INT.1 ST introduction EAL5/BSI-CC-PP-0084-2014 ASE_OBJ.2 Security objectives EAL5/BSI-CC-PP-0084-2014 ASE_REQ.2 Derived security requirements EAL5/BSI-CC-PP-0084-2014 ASE_SPD.1 Security problem definition EAL5/BSI-CC-PP-0084-2014 ASE_TSS.2 TOE summary specification Security Target ATE_COV.2 Analysis of coverage EAL5/BSI-CC-PP-0084-2014 ATE_DPT.3 Testing: modular design EAL5 ATE_FUN.1 Functional testing EAL5/BSI-CC-PP-0084-2014 ATE_IND.2 Independent testing - sample EAL5/BSI-CC-PP-0084-2014 AVA_VAN.5 Advanced methodical vulnerability analysis BSI-CC-PP-0084-2014 Table 10. TOE security assurance requirements (continued) Label Title Origin Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 90/144 SMD_ST31G480_ST_18_002 415 The text of the impacted refinements of BSI-CC-PP-0084-2014 is reproduced in the next sections. 416 For reader’s ease, an impact summary is provided in Table 11. 5.3.1 Refinement regarding functional specification (ADV_FSP) 417 Although the IC Dedicated Test Software is a part of the TOE, the test functions of the IC Dedicated Test Software are not described in the Functional Specification because the IC Dedicated Test Software is considered as a test tool delivered with the TOE but not providing security functions for the operational phase of the TOE. The IC Dedicated Software provides security functionalities as soon as the TOE becomes operational (boot software). These are properly identified in the delivered documentation. 418 The Functional Specification refers to datasheet to trace security features that do not provide any external interface but that contribute to fulfil the SFRs e.g. like physical protection. Thereby they are part of the complete instantiation of the SFRs. 419 The Functional Specification refers to design specifications to detail the mechanisms against physical attacks described in a more general way only, but detailed enough to be able to support Test Coverage Analysis also for those mechanisms where inspection of the layout is of relevance or tests beside the TSFI may be needed. 420 The Functional Specification refers to data sheet to specify operating conditions of the TOE. These conditions include but are not limited to the frequency of the clock, the power supply, and the temperature. 421 All functions and mechanisms which control access to the functions provided by the IC Dedicated Test Software (refer to the security functional requirement (FMT_LIM.2)) are part of the Functional Specification. Details will be given in the document for ADV_ARC, refer to Section 6.2.1.5. In addition, all these functions and mechanisms are subsequently be Table 11. Impact of EAL5 selection on BSI-CC-PP-0084-2014 refinements Assurance Family BSI-CC-PP- 0084-2014 Level ST Level Impact on refinement ADO_DEL 1 1 None ALC_DVS 2 2 None ALC_CMS 4 5 None, refinement is still valid ALC_CMC 4 5 None, refinement is still valid ADV_ARC 1 1 None ADV_FSP 4 5 Presentation style changes, IC Dedicated Software is included ADV_IMP 1 2 None, refinement is still valid ATE_COV 2 2 IC Dedicated Software is included AGD_OPE 1 1 None AGD_PRE 1 1 None AVA_VAN 5 5 None ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 91/144 refined according to all relevant requirements of the Common Criteria assurance class ADV because these functions and mechanisms are active after TOE Delivery and need to be part of the assurance aspects Tests (class ATE) and Vulnerability Assessment (class AVA). Therefore, all necessary information is provided to allow tests and vulnerability assessment. 422 Since the selected higher-level assurance component requires a security functional specification presented in a “semi-formal style" (ADV_FSP.5.2C) the changes affect the style of description, the BSI-CC-PP-0084-2014 refinements can be applied with changes covering the IC Dedicated Test Software and are valid for ADV_FSP.5. 5.3.2 Refinement regarding test coverage (ATE_COV) 423 The TOE is tested under different operating conditions within the specified ranges. These conditions include but are not limited to the frequency of the clock, the power supply, and the temperature. This means that “Fault tolerance (FRU_FLT.2)” is proven for the complete TSF. The tests must also cover functions which may be affected by “ageing” (such as EEPROM writing). 424 The existence and effectiveness of measures against physical attacks (as specified by the functional requirement FPT_PHP.3) cannot be tested in a straightforward way. Instead STMicroelectronics provides evidence that the TOE actually has the particular physical characteristics (especially layout design principles). This is done by checking the layout (implementation or actual) in an appropriate way. The required evidence pertains to the existence of mechanisms against physical attacks (unless being obvious). 425 The IC Dedicated Test Software is seen as a “test tool” being delivered as part of the TOE. However, the Test Features do not provide security functionality. Therefore, Test Features need not to be covered by the Test Coverage Analysis but all functions and mechanisms which limit the capability of the functions (cf. FMT_LIM.1) and control access to the functions (cf. FMT_LIM.2) provided by the IC Dedicated Test Software must be part of the Test Coverage Analysis. The IC Dedicated Software provides security functionalities as soon as the TOE becomes operational (boot software). These are part of the Test Coverage Analysis. 5.4 Security Requirements rationale 5.4.1 Rationale for the Security Functional Requirements 426 Just as for the security objectives rationale of Section 4.3, the main line of this rationale is that the inclusion of all the security requirements of the BSI-CC-PP-0084-2014 protection profile, together with those in AUG, and with those introduced in this Security Target, guarantees that all the security objectives identified in Section 4 are suitably addressed by the security requirements stated in this chapter, and that the latter together form an internally consistent whole. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 92/144 SMD_ST31G480_ST_18_002 Table 12. Security Requirements versus Security Objectives Security Objective TOE Security Functional and Assurance Requirements BSI.O.Leak-Inherent Basic internal transfer protection FDP_ITT.1 Basic internal TSF data transfer protection FPT_ITT.1 Subset information flow control FDP_IFC.1 BSI.O.Phys-Probing Stored data confidentiality FDP_SDC.1 Resistance to physical attack FPT_PHP.3 BSI.O.Malfunction Limited fault tolerance FRU_FLT.2 Failure with preservation of secure state FPT_FLS.1 BSI.O.Phys-Manipulation Stored data integrity monitoring and action FDP_SDI.2 Resistance to physical attack FPT_PHP.3 BSI.O.Leak-Forced All requirements listed for BSI.O.Leak-Inherent FDP_ITT.1, FPT_ITT.1, FDP_IFC.1 plus those listed for BSI.O.Malfunction and BSI.O.Phys- Manipulation FRU_FLT.2, FPT_FLS.1, FDP_SDI.2, FPT_PHP.3 BSI.O.Abuse-Func Limited capabilities FMT_LIM.1 / Test Limited availability FMT_LIM.2 / Test Limited capabilities - Secure Diagnostic FMT_LIM.1 / Sdiag Limited availability - Secure Diagnostic FMT_LIM.2 / Sdiag Inter-TSF trusted channel - Secure Diagnostic FTP_ITC.1 / Sdiag Audit review - Secure Diagnostic FAU_SAR.1 / Sdiag plus those for BSI.O.Leak-Inherent, BSI.O.Phys-Probing, BSI.O.Malfunction, BSI.O.Phys-Manipulation, BSI.O.Leak-Forced FDP_ITT.1, FPT_ITT.1, FDP_IFC.1, FDP_SDC.1, FDP_SDI.2, FPT_PHP.3, FRU_FLT.2, FPT_FLS.1 BSI.O.Identification Audit storage FAU_SAS.1 BSI.O.RND Random number generation FCS_RNG.1 plus those for BSI.O.Leak-Inherent, BSI.O.Phys-Probing, BSI.O.Malfunction, BSI.O.Phys-Manipulation, BSI.O.Leak-Forced FDP_ITT.1, FPT_ITT.1, FDP_IFC.1, FDP_IFC.1, FDP_SDC.1, FPT_PHP.3, FRU_FLT.2, FPT_FLS.1 BSI.OE.Resp-Appl Not applicable BSI.OE.Process-Sec-IC Not applicable BSI.OE.Lim-Block-Loader Not applicable BSI.OE.Loader-Usage Not applicable BSI.OE.TOE-Auth Not applicable OE.Enable-Disable-Secure-Diag Not applicable OE.Secure-Diag-Usage Not applicable BSI.O.Authentication Authentication Proof of Identity FIA_API.1 ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 93/144 BSI.O.Cap-Avail-Loader Limited capabilities FMT_LIM.1 / Loader Limited availability FMT_LIM.2 / Loader BSI.O.Ctrl-Auth-Loader “Inter-TSF trusted channel - Loader” FTP_ITC.1 / Loader “Basic data exchange confidentiality - Loader” FDP_UCT.1 / Loader “Data exchange integrity - Loader” FDP_UIT.1 / Loader “Subset access control - Loader” FDP_ACC.1 / Loader “Security attribute based access control - Loader” FDP_ACF.1 / Loader “Static attribute initialisation - Loader” FMT_MSA.3 / Loader “Management of security attribute - Loader” FMT_MSA.1 / Loader “Specification of management functions - Loader” FMT_SMF.1 / Loader “Security roles - Loader” FMT_SMR.1 / Loader “Timing of identification - Loader” FIA_UID.1 / Loader “Timing of authentication - Loader” FIA_UAU.1 / Loader ANSSI.O.Prot-TSF- Confidentiality “Inter-TSF trusted channel - Loader” FTP_ITC.1 / Loader “Basic data exchange confidentiality - Loader” FDP_UCT.1 / Loader “Data exchange integrity - Loader” FDP_UIT.1 / Loader “Subset access control - Loader” FDP_ACC.1 / Loader “Security attribute based access control - Loader” FDP_ACF.1 / Loader “Static attribute initialisation - Loader” FMT_MSA.3 / Loader “Management of security attribute - Loader” FMT_MSA.1 / Loader “Specification of management functions - Loader” FMT_SMF.1 / Loader “Security roles - Loader” FMT_SMR.1 / Loader “Timing of identification - Loader” FIA_UID.1 / Loader “Timing of authentication - Loader” FIA_UAU.1 / Loader ANSSI.O.Secure-Load-ACode “Inter-TSF trusted channel - Loader” FTP_ITC.1 / Loader “Basic data exchange confidentiality - Loader” FDP_UCT.1 / Loader “Data exchange integrity - Loader” FDP_UIT.1 / Loader “Subset access control - Loader” FDP_ACC.1 / Loader “Security attribute based access control - Loader” FDP_ACF.1 / Loader “Static attribute initialisation - Loader” FMT_MSA.3 / Loader “Management of security attribute - Loader” FMT_MSA.1 / Loader “Specification of management functions - Loader” FMT_SMF.1 / Loader “Security roles - Loader” FMT_SMR.1 / Loader “Timing of identification - Loader” FIA_UID.1 / Loader “Timing of authentication - Loader” FIA_UAU.1 / Loader “Audit storage - Loader” FAU_SAS.1 / Loader Table 12. Security Requirements versus Security Objectives Security Objective TOE Security Functional and Assurance Requirements Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 94/144 SMD_ST31G480_ST_18_002 ANSSI.O.Secure-AC-Activation “Failure with preservation of secure state - Loader” FPT_FLS.1 / Loader ANSSI.O.TOE-Identification “Audit storage - Loader” FAU_SAS.1 / Loader “Audit review - Loader” FAU_SAR.1 / Loader “Stored data integrity monitoring and action” FDP_SDI.2 O.Secure-Load-AMemImage “Inter-TSF trusted channel - Loader” FTP_ITC.1 / Loader “Basic data exchange confidentiality - Loader” FDP_UCT.1 / Loader “Data exchange integrity - Loader” FDP_UIT.1 / Loader “Subset access control - Loader” FDP_ACC.1 / Loader “Security attribute based access control - Loader” FDP_ACF.1 / Loader “Static attribute initialisation - Loader” FMT_MSA.3 / Loader “Management of security attribute - Loader” FMT_MSA.1 / Loader “Specification of management functions - Loader” FMT_SMF.1 / Loader “Security roles - Loader” FMT_SMR.1 / Loader “Timing of identification - Loader” FIA_UID.1 / Loader “Timing of authentication - Loader” FIA_UAU.1 / Loader “Audit storage - Loader” FAU_SAS.1 / Loader O.MemImage-Identification “Failure with preservation of secure state - Loader” FPT_FLS.1 / Loader “Audit storage - Loader” FAU_SAS.1 / Loader “Audit review - Loader” FAU_SAR.1 / Loader “Stored data integrity monitoring and action” FDP_SDI.2 OE.Composite-TOE-Id Not applicable OE.TOE-Id Not applicable AUG1.O.Add-Functions Cryptographic operation FCS_COP.1 Cryptographic key generation FCS_CKM.1 AUG4.O.Mem-Access Complete access control FDP_ACC.2 / Memories Security attribute based access control FDP_ACF.1 / Memories Static attribute initialisation FMT_MSA.3 / Memories Management of security attribute FMT_MSA.1 / Memories Specification of management functions FMT_SMF.1 / Memories Table 12. Security Requirements versus Security Objectives Security Objective TOE Security Functional and Assurance Requirements ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 95/144 O.Access-Control-MFPlus Security roles FMT_SMR.1 / MFPlus Subset access control FDP_ACC.1 / MFPlus Security attribute based access control FDP_ACF.1 / MFPlus Static attribute initialisation FMT_MSA.3 / MFPlus Management of security attribute FMT_MSA.1 / MFPlus Specification of management functions FMT_SMF.1 / MFPlus Import of user data with security attributes FDP_ITC.2 / MFPlus Cryptographic key destruction FCS_CKM.4 / MFPlus Management of TSF data FMT_MTD.1 / MFPlus O.Authentication-MFPlus Cryptographic operation FCS_COP.1 / AES User identification before any action FIA_UID.2 / MFPlus User authentication before any action FIA_UAU.2 / MFPlus Multiple authentication mechanisms FIA_UAU.5 / MFPlus Trusted path FPT_TRP.1 / MFPlus Replay detection FPT_RPL.1 / MFPlus O.Encryption Cryptographic operation FCS_COP.1 / AES Trusted path FPT_TRP.1 / MFPlus O.MAC-MFPlus Cryptographic operation FCS_COP.1 / AES Trusted path FPT_TRP.1 / MFPlus Replay detection FPT_RPL.1 / MFPlus O.Type-Consistency-MFPlus Inter-TSF basic TSF data consistency FPT_TDC.1 / MFPlus O.No-Trace-MFPlus Unlinkability FPR_UNL.1 / MFPlus O.Resp-Appl-MFPlus All SFRs defined additionnaly in the ST O.Resource-MFPlus Minimum and maximum quotas FRU_RSA.2 / MFPlus O.Verification-MFPlus Failure with preservation of secure state FPT_FLS.1 Subset access control FDP_ACC.1 / APPLI_FWL Security attribute based access control FDP_ACF.1 / APPLI_FWL O.Firewall-MFPlus Subset access control FDP_ACC.1 / APPLI_FWL Security attribute based access control FDP_ACF.1 / APPLI_FWL Static attribute initialisation FMT_MSA.3 / APPLI_FWL O.Shr-Var-MFPlus Subset residual information protection FDP_RIP.1 / MFPlus Table 12. Security Requirements versus Security Objectives Security Objective TOE Security Functional and Assurance Requirements Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 96/144 SMD_ST31G480_ST_18_002 427 As origins of security objectives have been carefully kept in their labelling, and origins of security requirements have been carefully identified in Table 7 and Table 12, it can be O.Access-Control-DESFire Security roles FMT_SMR.1 / DESFire Subset access control FDP_ACC.1 / DESFire Security attribute based access control FDP_ACF.1 / DESFire Static attribute initialisation FMT_MSA.3 / DESFire Management of security attribute FMT_MSA.1 / DESFire Specification of management functions FMT_SMF.1 / DESFire Import of user data with security attributes FDP_ITC.2 / DESFire Cryptographic key destruction FCS_CKM.4 / DESFire Management of TSF data FMT_MTD.1 / DESFire O.Authentication-DESFire Cryptographic operation FCS_COP.1 / DES Cryptographic operation FCS_COP.1 / AES User identification before any action FIA_UID.2 / DESFire User authentication before any action FIA_UAU.2 / DESFire Multiple authentication mechanisms FIA_UAU.5 / DESFire Trusted path FPT_TRP.1 / DESFire Replay detection FPT_RPL.1 / DESFire O.Confidentiality-DESFire Cryptographic operation FCS_COP.1 / DES Cryptographic operation FCS_COP.1 / AES Trusted path FPT_TRP.1 / DESFire Replay detection FPT_RPL.1 / DESFire O.Type-Consistency-DESFire Inter-TSF basic TSF data consistency FPT_TDC.1 / DESFire O.Transaction-DESFire Basic rollback FDP_ROL.1 / DESFire O.No-Trace-DESFire Unlinkability FPR_UNL.1 / DESFire O.Resp-Appl-DESFire All SFRs defined additionnaly in the ST O.Resource-DESFire Minimum and maximum quotas FRU_RSA.2 / DESFire O.Verification-DESFire Subset access control FDP_ACC.1 / APPLI_FWL Security attribute based access control FDP_ACF.1 / APPLI_FWL Static attribute initialisation FMT_MSA.3 / APPLI_FWL Failure with preservation of secure state FPT_FLS.1 O.Firewall-DESFire Subset access control FDP_ACC.1 / APPLI_FWL Security attribute based access control FDP_ACF.1 / APPLI_FWL Static attribute initialisation FMT_MSA.3 / APPLI_FWL O.Shr-Res-DESFire Subset residual information protection FDP_RIP.1 / DESFire OE.Secure-Values-DESFire Not applicable OE.Terminal-Support-DESFire Not applicable Table 12. Security Requirements versus Security Objectives Security Objective TOE Security Functional and Assurance Requirements ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 97/144 verified that the justifications provided by the BSI-CC-PP-0084-2014 protection profile and AUG can just be carried forward to their union. 428 From Table 5, it is straightforward to identify additional security objectives for the TOE (AUG1.O.Add-Functions and AUG4.O.Mem-Access) tracing back to AUG, additional objectives (ANSSI.O.Prot-TSF-Confidentiality, ANSSI.O.Secure-Load-ACode, ANSSI.O.Secure-AC-Activation and ANSSI.O.TOE-Identification) tracing back to ANSSI- CC-NOTE-06/2.0 EN / ANSSI-CC-CER/F/06.002, and additional objectives (O.Secure- Load-AMemImage, O.MemImage-Identification, O.Access-Control-MFPlus, O.Authentication-MFPlus, O.Encryption, O.MAC-MFPlus, O.Type-Consistency-MFPlus, O.No-Trace-MFPlus, O.Resp-Appl-MFPlus, O.Resource-MFPlus, O.Verification-MFPlus, O.Firewall-MFPlus, O.Shr-Var-MFPlus, O.Access-Control-DESFire, O.Authentication- DESFire, O.Confidentiality-DESFire, O.Type-Consistency-DESFire, O.Transaction- DESFire, O.No-Trace-DESFire, O.Resp-Appl-DESFire, O.Resource-DESFire, O.Verification-DESFire, O.Firewall-DESFire and O.Shr-Res-DESFire) introduced in this Security Target. This rationale must show that security requirements suitably address them all. 429 Furthermore, a careful observation of the requirements listed in Table 7 and Table 12 shows that: • there are security requirements introduced from AUG (FCS_COP.1, FDP_ACC.2 / Memories, FDP_ACF.1 / Memories, FMT_MSA.3 / Memories and FMT_MSA.1 / Memories), • there are additional security requirements introduced by this Security Target (FCS_CKM.1, FMT_MSA.3 / Loader, FMT_MSA.1 / Loader, FMT_SMF.1 / Loader, FMT_SMR.1 / Loader, FIA_UID.1 / Loader, FIA_UAU.1 / Loader, FPT_FLS.1 / Loader, FAU_SAS.1 / Loader, FAU_SAR.1 / Loader, FMT_SMF.1 / Memories, FMT_SMR.1 / MFPlus, FDP_ACC.1 / MFPlus, FDP_ACF.1 / MFPlus, FMT_MSA.3 / MFPlus, FMT_MSA.1 / MFPlus, FMT_SMF.1 / MFPlus, FDP_ITC.2 / MFPlus, FPT_TDC.1 / MFPlus, FIA_UID.2 / MFPlus, FIA_UAU.2 / MFPlus, FIA_UAU.5 / MFPlus, FMT_MTD.1 / MFPlus, FPT_TRP.1 / MFPlus, FCS_CKM.4 / MFPlus, FPT_RPL.1 / MFPlus, FPR_UNL.1 / MFPlus, FRU_RSA.2 / MFPlus, FDP_RIP.1 / MFPlus, FMT_SMR.1 / DESFire, FDP_ACC.1 / DESFire, FDP_ACF.1 / DESFire, FMT_MSA.3 / DESFire, FMT_MSA.1 / DESFire, FMT_SMF.1 / DESFire, FDP_ITC.2 / DESFire, FPT_TDC.1 / DESFire, FIA_UID.2 / DESFire, FIA_UAU.2 / DESFire, FIA_UAU.5 / DESFire, FMT_MTD.1 / DESFire, FPT_TRP.1 / DESFire, FCS_CKM.4 / DESFire, FDP_ROL.1 / DESFire, FPT_RPL.1 / DESFire, FPR_UNL.1 / DESFire, FRU_RSA.2 / DESFire, FDP_RIP.1 / DESFire, FDP_ACC.1 / APPLI_FWL, FDP_ACF.1 / APPLI_FWL, FMT_MSA.3 / APPLI_FWL, FTP_ITC.1 / Sdiag, FAU_SAR.1 / Sdiag, FMT_LIM.1 / Sdiag, FMT_LIM.2 / Sdiag, and various assurance requirements of EAL5+). 430 Though it remains to show that: • security objectives from this Security Target, from ANSSI-CC-NOTE-06/2.0 EN / ANSSI-CC-CER/F/06.002 and from AUG are addressed by security requirements stated in this chapter, • additional security requirements from this Security Target and from AUG are mutually supportive with the security requirements from the BSI-CC-PP-0084-2014 protection profile, and they do not introduce internal contradictions, • all dependencies are still satisfied. 431 The justification that the additional security objectives are suitably addressed, that the additional security requirements are mutually supportive and that, together with those Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 98/144 SMD_ST31G480_ST_18_002 already in BSI-CC-PP-0084-2014, they form an internally consistent whole, is provided in the next subsections. 5.4.2 Additional security objectives are suitably addressed Security objective “Dynamic Area based Memory Access Control (AUG4.O.Mem-Access)” 432 The justification related to the security objective “Dynamic Area based Memory Access Control (AUG4.O.Mem-Access)” is as follows: 433 The security functional requirements "Complete access control (FDP_ACC.2) / Memories" and "Security attribute based access control (FDP_ACF.1) / Memories", with the related Security Function Policy (SFP) “Dynamic Memory Access Control Policy” exactly require to implement a Dynamic area based memory access control as demanded by AUG4.O.Mem-Access. Therefore, FDP_ACC.2 / Memories and FDP_ACF.1 / Memories with their SFP are suitable to meet the security objective. 434 The security functional requirement "Static attribute initialisation (FMT_MSA.3) / Memories" requires that the TOE provides default values for security attributes. The ability to update the security attributes is restricted to privileged subject(s) as further detailed in the security functional requirement "Management of security attributes (FMT_MSA.1) / Memories". These management functions ensure that the required access control can be realised using the functions provided by the TOE. Security objective “Additional Specific Security Functionality (AUG1.O.Add- Functions)” 435 The justification related to the security objective “Additional Specific Security Functionality (AUG1.O.Add-Functions)” is as follows: 436 The security functional requirements “Cryptographic operation (FCS_COP.1)” and "Cryptographic key generation (FCS_CKM.1)" exactly require those functions to be implemented that are demanded by AUG1.O.Add-Functions. Therefore, FCS_COP.1 is suitable to meet the security objective, together with FCS_CKM.1. Security objective “Protection against Abuse of Functionality (BSI.O.Abuse- Func)” 437 This objective states that abuse of functions (especially provided by the IC Dedicated Test Software, for instance in order to read secret data) must not be possible in Phase 7 of the life-cycle. There are two possibilities to achieve this: (i) They cannot be used by an attacker (i. e. its availability is limited) or (ii) using them would not be of relevant use for an attacker (i. e. its capabilities are limited) since the functions are designed in a specific way. The first possibility is specified by "Limited availability (FMT_LIM.2) / Test" and "Limited availability (FMT_LIM.2) / Sdiag", and the second one by "Limited capabilities (FMT_LIM.1) / Test" and "Limited capabilities (FMT_LIM.1) / Sdiag". Since these requirements are combined to support the policy, which is suitable to fulfil O.Abuse-Func, these security functional requirements together are suitable to meet the objective. 438 Other security functional requirements which prevent attackers from circumventing the functions implementing these two security functional requirements (for instance by manipulating the hardware) also support the objective. The relevant Security Functional requirements are also listed in Table 12. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 99/144 Security objective “Access control and authenticity for the Loader (BSI.O.Ctrl- Auth-Loader)” 439 The justification related to the security objective “Access control and authenticity for the Loader (BSI.O.Ctrl-Auth-Loader)” is as follows: 440 The security functional requirement "Subset access control (FDP_ACC.1) / Loader" defines the subjects, objects and operations of the Loader SFP enforced by the SFR FTP_ITC.1 / Loader, FDP_UCT.1 / Loader, FDP_UIT.1 / Loader and FDP_ACF.1 / Loader. The security functional requirement "Inter-TSF trusted channel (FTP_ITC.1) / Loader" requires the TSF to establish a trusted channel with assured identification of its end points and protection of the channel data from modification or disclosure. The security functional requirement "Basic data exchange confidentiality (FDP_UCT.1) / Loader" requires the TSF to receive data protected from unauthorized disclosure. The security functional requirement "Data exchange integrity (FDP_UIT.1) / Loader" requires the TSF to verify the integrity and the rightfulness of the received data. The security functional requirement "Security attribute based access control (FDP_ACF.1) / Loader" requires the TSF to implement access control for the Loader functionality. Therefore, FTP_ITC.1 / Loader, FDP_UCT.1 / Loader, FDP_UIT.1 / Loader, FDP_ACC.1 / Loader and FDP_ACF.1 / Loader with their SFP are suitable to meet the security objective. 441 Complementary, the security functional requirement "Static attribute initialisation (FMT_MSA.3) / Loader" requires that the TOE provides default values for security attributes. The ability to update the security attributes is restricted to privileged subject(s) as further detailed in the security functional requirement "Management of security attributes (FMT_MSA.1) / Loader" The security functional requirements "Security roles (FMT_SMR.1) / Loader", "Timing of identification (FIA_UID.1) / Loader" and "Timing of authentication (FIA_UAU.1) / Loader" specify the roles that the TSF recognises and the actions authorized before their identification. The security functional requirement "Specification of management functions (FMT_SMF.1) / Loader" provides additional controlled facility for adapting the loader behaviour to the user’s needs. These management functions ensure that the required access control, associated to the loading feature, can be realized using the functions provided by the TOE. Security objectives “Protection of the confidentiality of the TSF (ANSSI.O.Prot-TSF-Confidentiality)”, “Secure loading of the Additional Code (ANSSI.O.Secure-Load-ACode)” and “Secure loading of the Additional Memory Image (O.Secure-Load-AMemImage)” 442 The justification related to the security objectives “Protection of the confidentiality of the TSF (ANSSI.O.Prot-TSF-Confidentiality)”, “Secure loading of the Additional Code (ANSSI.O.Secure-Load-ACode)” and “Secure loading of the Additional Memory Image (O.Secure-Load-AMemImage)” is as follows: 443 The security functional requirement "Subset access control (FDP_ACC.1) / Loader" defines the subjects, objects and operations of the Loader SFP enforced by the SFR FTP_ITC.1, FDP_UCT.1, FDP_UIT.1 and FDP_ACF.1/Loader. The security functional requirement "Inter-TSF trusted channel (FTP_ITC.1) / Loader" requires the TSF to establish a trusted channel with assured identification of its end points and protection of the channel data from modification or disclosure. The security functional requirement "Basic data exchange confidentiality (FDP_UCT.1) / Loader" requires the TSF to receive data protected from unauthorized disclosure. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 100/144 SMD_ST31G480_ST_18_002 The security functional requirement "Data exchange integrity (FDP_UIT.1) / Loader" requires the TSF to verify the integrity of the received data. The security functional requirement "Security attribute based access control (FDP_ACF.1) / Loader" requires the TSF to implement access control for the Loader functionality. The security functional requirement "Static attribute initialisation (FMT_MSA.3) / Loader" requires that the TOE provides default values for security attributes. The ability to update the security attributes is restricted to privileged subject(s) as further detailed in the security functional requirement "Management of security attributes (FMT_MSA.1) / Loader". The security functional requirements "Security roles (FMT_SMR.1) / Loader", "Timing of identification (FIA_UID.1) / Loader" and "Timing of authentication (FIA_UAU.1) / Loader" specify the roles that the TSF recognises and the actions authorized before their identification. The security functional requirement "Specification of management functions (FMT_SMF.1) / Loader" provides additional controlled facility for adapting the loader behaviour to the user’s needs. These management functions ensure that the required access control, associated to the loading feature, can be realised using the functions provided by the TOE. The security functional requirement "Audit storage (FAU_SAS.1) / Loader" requires to store the identification data needed to enforce that only the allowed version of the Additional Memory Image can be loaded on the Initial TOE. 444 Therefore, FTP_ITC.1 / Loader, FDP_UCT.1 / Loader, FDP_UIT.1 / Loader, FDP_ACC.1 / Loader, FDP_ACF.1 / Loader together with FMT_MSA.3 / Loader, FMT_MSA.1 / Loader, FMT_SMR.1 / Loader, FMT_SMF.1 / Loader, FIA_UID.1 / Loader, FIA_UAU.1 / Loader, and FAU_SAS.1 / Loader are suitable to meet these security objectives. Security objective “Secure activation of the Additional Code (ANSSI.O.Secure-AC-Activation)” 445 The justification related to the security objective “Secure activation of the Additional Code (ANSSI.O.Secure-AC-Activation)” is as follows: 446 The security functional requirement "Audit storage (FAU_SAS.1) / Loader" requires the TSF to fail secure unless the Loading of the Additional Memory Image, including update of the Identification data, is comprehensive, as specified by ANSSI.O.Secure-AC-Activation. 447 Therefore, FPT_FLS.1 / Loader is suitable to meet this security objective. Security objective “Secure identification of the TOE (ANSSI.O.TOE- Identification)” 448 The justification related to the security objective “Secure identification of the TOE (ANSSI.O.TOE-Identification)” is as follows: 449 The security functional requirement "Audit storage (FAU_SAS.1) / Loader" requires the TSF to store the Identification Data of the Memory Images. The security functional requirement "Stored data integrity monitoring and action (FDP_SDI.2)" requires the TSF to detect the integrity errors of the stored data and react in case of detected errors. The security functional requirement "Audit review (FAU_SAR.1) / Loader" allows any user to read this Identification Data. 450 Therefore, FAU_SAS.1 / Loader, and FAU_SAR.1 / Loader together with FDP_SDI.2 are suitable to meet this security objective. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 101/144 Security objective “Secure identification of the Memory Image (O.MemImage- Identification)” 451 The justification related to the security objective “Secure identification of the Memory Image (O.MemImage-Identification)” is as follows: 452 The security functional requirement "Audit storage (FAU_SAS.1) / Loader" requires the TSF to store the Identification Data of the Memory Images. The security functional requirement "Stored data integrity monitoring and action (FDP_SDI.2)" requires the TSF to detect the integrity errors of the stored user data and react in case of detected errors. The security functional requirement "Audit review (FAU_SAR.1) / Loader" allows any user to read this Identification Data. The security functional requirement "Audit storage (FAU_SAS.1) / Loader" requires the TSF to fail secure unless the Loading of the Additional Memory Image, including update of the Identification data, is comprehensive, as specified by ANSSI.O.Secure-AC-Activation. 453 Therefore, FAU_SAS.1 / Loader, FAU_SAR.1 / Loader together with FDP_SDI.2 and FPT_FLS.1 / Loader are suitable to meet this security objective. Security objective “Access control for MFPlus (O.Access-Control-MFPlus)” 454 The justification related to the security objective “Access control for MFPlus (O.Access- Control-MFPlus)” is as follows: 455 The security functional requirement "Security roles (FMT_SMR.1) / MFPlus" defines the roles of the MFPlus Access Control Policy. The security functional requirements "Subset access control (FDP_ACC.1) / MFPlus" and "Security attribute based access control (FDP_ACF.1) / MFPlus" define the rules and "Static attribute initialisation (FMT_MSA.3) / MFPlus" and "Management of security attributes (FMT_MSA.1) / MFPlus" the attributes that the access control is based on. The security functional requirement "Management of TSF data (FMT_MTD.1) / MFPlus" provides the rules for the management of the authentication data. The management functions are defined by "Specification of Management Functions (FMT_SMF.1) / MFPlus". Since the TOE stores data on behalf of the authorised subjects, import of user data with security attributes is defined by "Import of user data with security attributes (FDP_ITC.2) / MFPlus". Since cryptographic keys are used for authentication (refer to O.Authentication-MFPlus), these keys have to be removed if they are no longer needed for the access control. This is required by "Cryptographic key destruction (FCS_CKM.4) / MFPlus". These nine SFRs together provide an access control mechanism as required by the objective O.Access-Control-MFPlus. Security objective “Authentication for MFPlus (O.Authentication-MFPlus)” 456 The justification related to the security objective “Authentication for MFPlus (O.Authentication-MFPlus)” is as follows: 457 The security functional requirement "Cryptographic operation (FCS_COP.1)/ AES" requires that the TOE provides the basic cryptographic algorithm that can be used to perform the authentication. The security functional requirements "User identification before any action (FIA_UID.2) / MFPlus", "User authentication before any action (FIA_UAU.2) / MFPlus" and "Multiple authentication mechanisms (FIA_UAU.5) / MFPlus" together define that users must be Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 102/144 SMD_ST31G480_ST_18_002 identified and authenticated before any action. "Trusted path (FTP_TRP.1) / MFPlus" requires a trusted communication path between the TOE and remote users; FTP_TRP.1.3 especially requires “authentication requests”. Together with "Replay detection (FPT_RPL.1) / MFPlus" which requires a replay detection for these authentication requests, the six security functional requirements fulfill the objective O.Authentication-MFPlus. Security objective “Confidential Communication (O.Encryption)” 458 The justification related to the security objective “Confidential Communication (O.Encryption)” is as follows: 459 The security functional requirement "Cryptographic operation (FCS_COP.1)/ AES" requires that the TOE provides the basic cryptographic algorithms that can be used to protect the communication by encryption. "Trusted path (FTP_TRP.1) / MFPlus" requires a trusted communication path between the TOE and remote users; FTP_TRP.1.3 especially requires a trusted path for “authentication request, confidentiality and/or data integrity verification for data transfers on request based on a setting in the MFP Configuration Block”. These two security functional requirements fulfill the objective O.Encryption. Security objective “MFPlus Integrity-protected Communication (O.MAC- MFPlus)” 460 The justification related to the security objective “MFPlus Integrity-protected Communication (O.MAC-MFPlus)” is as follows: 461 The security functional requirement "Cryptographic operation (FCS_COP.1)/ AES" requires that the TOE provides the basic cryptographic algorithms that can be used to compute a MAC which can protect the integrity of the communication. "Trusted path (FTP_TRP.1) / MFPlus" requires a trusted communication path between the TOE and remote users; FTP_TRP.1.3 especially requires “confidentiality and/or data integrity verification for data transfers on request of the file owner”. Together with "Replay detection (FPT_RPL.1) / MFPlus" which requires a replay detection for these data transfers, the three security functional requirements fulfill the objective O.MAC-MFPlus. Security objective “Data type consistency (O.Type-Consistency-MFPlus)” 462 The justification related to the security objective “Data type consistency (O.Type- Consistency-MFPlus)” is as follows: 463 The security functional requirement "Inter-TSF basic TSF data consistency (FPT_TDC.1) / MFPlus" requires the TOE to consistently interpret data blocks. The TOE will honour the respective file formats and boundaries (i.e. upper and lower limits, size limitations). This meets the objective O.Type-Consistency-MFPlus. Security objective “Preventing traceability for MFPlus (O.No-Trace-MFPlus)” 464 The justification related to the security objective “Preventing traceability for MFPlus (O.No- Trace-MFPlus)” is as follows: 465 The security functional requirement "Unlinkability (FPR_UNL.1) / MFPlus" requires that unauthorised subjects other than the card holder are unable to determine whether any operation of the TOE were caused by the same user. This meets the objective O.No-Trace-MFPlus. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 103/144 Security objective “Treatment of user data for MFPlus (O.Resp-Appl-MFPlus)” 466 The justification related to the security objective “Treatment of user data for MFPlus (O.Resp-Appl-MFPlus)” is as follows: 467 The objective was translated from an environment objective in the PP into a TOE objective in this ST. The objective is that “Security relevant User Data (especially cryptographic keys) are treated by the Security IC Embedded Software as required by the security needs of the specific application context.” The application context is defined by the security environment described in this ST. The additional SFRs defined in this ST do address the additional TOE objectives of the ST based on the ST security environment, therefore O.Resp-Appl- MFPlus is fulfilled by the additional ST SFRs. Security objective “NVM resource availability for MFPlus (O.Resource- MFPlus)” 468 The justification related to the security objective “Resource availability for MFPlus (O.Resource-MFPlus)” is as follows: 469 The security functional requirement "Minimum and maximum quotas (FRU_RSA.2) / MFPlus" requires that sufficient parts of the NVM and RAM are reserved for MFPlus use. This fulfils the objective O.Resource-MFPlus. Security objective “MFPlus code integrity check (O.Verification-MFPlus)” 470 The justification related to the security objective “MFPlus code integrity check (O.Verification-MFPlus)” is as follows: 471 The security functional requirements "Subset access control (FDP_ACC.1) / APPLI_FWL" and "Security attribute based access control (FDP_ACF.1) / APPLI_FWL", supported by "Static attribute initialisation (FMT_MSA.3) / APPLI_FWL", require that MFPlus code integrity is protected. In addition, the security functional requirement "Failure with preservation of secure state (FPT_FLS.1)" requires that in case of error on NVM, MFPlus execution is stopped. This meets the objective O.Verification-MFPlus. Security objective “MFPlus firewall (O.Firewall-MFPlus)” 472 The justification related to the security objective “MFPlus firewall (O.Firewall-MFPlus)” is as follows: 473 The security functional requirements "Subset access control (FDP_ACC.1) / APPLI_FWL" and "Security attribute based access control (FDP_ACF.1) / APPLI_FWL", supported by "Static attribute initialisation (FMT_MSA.3) / APPLI_FWL", require that no application can read, write, compare any piece of data or code belonging to MFPlus. This meets the objective O.Firewall-MFPlus. Security objective “MFPlus data cleaning for resource sharing (O.Shr-Var- MFPlus)” 474 The justification related to the security objective “MFPlus data cleaning for resource sharing (O.Shr-Var-MFPlus)” is as follows: 475 The security functional requirement "Subset residual information protection (FDP_RIP.1) / MFPlus" requires that the information content of a resource is made unavailable upon its deallocation from MFPlus. This meets the objective O.Shr-Var-MFPlus. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 104/144 SMD_ST31G480_ST_18_002 Security objective “Access control for DESFire (O.Access-Control-DESFire)” 476 The justification related to the security objective “Access control for DESFire (O.Access- Control-DESFire)” is as follows: 477 The security functional requirement "Security roles (FMT_SMR.1) / DESFire" defines the roles of the DESFire Access Control Policy. The security functional requirements "Subset access control (FDP_ACC.1) / DESFire" and "Security attribute based access control (FDP_ACF.1) / DESFire" define the rules and "Static attribute initialisation (FMT_MSA.3) / DESFire" and "Management of security attributes (FMT_MSA.1) / DESFire" the attributes that the access control is based on. The security functional requirement "Management of TSF data (FMT_MTD.1) / DESFire" provides the rules for the management of the authentication data. The management functions are defined by "Specification of Management Functions (FMT_SMF.1) / DESFire". Since the TOE stores data on behalf of the authorised subjects, import of user data with security attributes is defined by "Import of user data with security attributes (FDP_ITC.2) / DESFire". Since cryptographic keys are used for authentication (refer to O.Authentication-DESFire), these keys have to be removed if they are no longer needed for the access control (i.e. an application is deleted). This is required by "Cryptographic key destruction (FCS_CKM.4) / DESFire". These nine SFRs together provide an access control mechanism as required by the objective O.Access-Control-DESFire. Security objective “Authentication for DESFire (O.Authentication-DESFire)” 478 The justification related to the security objective “Authentication for DESFire (O.Authentication-DESFire)” is as follows: 479 The two security functional requirements "Cryptographic operation (FCS_COP.1) / DES" and "Cryptographic operation (FCS_COP.1) / AES" require that the TOE provides the basic cryptographic algorithms that can be used to perform the authentication. The security functional requirements "User identification before any action (FIA_UID.2) / DESFire", "User authentication before any action (FIA_UAU.2) / DESFire" and "Multiple authentication mechanisms (FIA_UAU.5) / DESFire" together define that users must be identified and authenticated before any action. The ‘none’ authentication of "Multiple authentication mechanisms (FIA_UAU.5) / DESFire" also ensures that a specific subject is identified and authenticated before an explicit authentication request is sent to the TOE. "Trusted path (FTP_TRP.1) / DESFire" requires a trusted communication path between the TOE and remote users; FTP_TRP.1.3 especially requires “authentication requests”. Together with "Replay detection (FPT_RPL.1) / DESFire" which requires a replay detection for these authentication requests, the seven security functional requirements fulfil the objective O.Authentication-DESFire. Security objective “DESFire Confidential Communication (O.Confidentiality- DESFire)” 480 The justification related to the security objective “DESFire Confidential communication (O.Confidentiality-DESFire)” is as follows: 481 The two security functional requirements "Cryptographic operation (FCS_COP.1) / DES" and "Cryptographic operation (FCS_COP.1) / AES" require that the TOE provides the basic cryptographic algorithm AES that can be used to protect the communication by encryption. "Trusted path (FTP_TRP.1) / DESFire" requires a trusted communication path between the TOE and remote users; FTP_TRP.1.3 especially requires “confidentiality and/or data ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 105/144 integrity verification for data transfers protected with AES and based on a setting in the file attributes”. Together with "Replay detection (FPT_RPL.1) / DESFire" which requires a replay detection for these data transfers, the three security functional requirements fulfil the objective O.Confidentiality-DESFire. Security objective “DESFire Data type consistency (O.Type-Consistency- DESFire)” 482 The justification related to the security objective “DESFire Data type consistency (O.Type- Consistency-DESFire)” is as follows: 483 The security functional requirement "Inter-TSF basic TSF data consistency (FPT_TDC.1) / DESFire" requires the TOE to consistently interpret data files and values. The TOE will honour the respective file formats and boundaries (i.e. upper and lower limits, size limitations). This meets the objective O.Type-Consistency-DESFire. Security objective “DESFire Transaction mechanism (O.Transaction-DESFire)” 484 The justification related to the security objective “DESFire Transaction mechanism (O.Transaction-DESFire)” is as follows: 485 The security functional requirement "Basic rollback (FDP_ROL.1) / DESFire" requires the possibility to rollback a set of modifying operations on backup files in total. The set of operations is defined by the scope of the transaction, which is itself limited by some boundary events. This fulfils the objective O.Transaction-DESFire. Security objective “Preventing traceability for DESFire (O.No-Trace-DESFire)” 486 The justification related to the security objective “Preventing traceability for DESFire (O.No- Trace-DESFire)” is as follows: 487 The security functional requirement "Unlinkability (FPR_UNL.1) / DESFire" requires that unauthorised subjects other than the card holder are unable to determine whether any operation of the TOE were caused by the same user. This meets the objective O.No-Trace- DESFire. Security objective “Treatment of user data for DESFire (O.Resp-Appl-DESFire)” 488 The justification related to the security objective “Treatment of user data for DESFire (O.Resp-Appl-DESFire)” is as follows: 489 The objective was translated from an environment objective in the PP into a TOE objective in this ST. The objective is that “Security relevant User Data (especially cryptographic keys) are treated by the Security IC Embedded Software as required by the security needs of the specific application context.” The application context is defined by the security environment described in this ST. The additional SFRs defined in this ST do address the additional TOE objectives of the ST based on the ST security environment, therefore O.Resp-Appl-DESFire is fulfilled by the additional ST SFRs. Security objective “NVM resource availability for DESFire (O.Resource- DESFire)” 490 The justification related to the security objective “Resource availability for DESFire (O.Resource-DESFire)” is as follows: Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 106/144 SMD_ST31G480_ST_18_002 491 The security functional requirement "Minimum and maximum quotas (FRU_RSA.2) / DESFire" requires that sufficient parts of the NVM and RAM are reserved for DESFire use. This fulfils the objective O.Resource-DESFire. Security objective “DESFire code integrity check (O.Verification-DESFire)” 492 The justification related to the security objective “DESFire code integrity check (O.Verification-DESFire)” is as follows: 493 The security functional requirements "Subset access control (FDP_ACC.1) / APPLI_FWL" and "Security attribute based access control (FDP_ACF.1) / APPLI_FWL", supported by "Static attribute initialisation (FMT_MSA.3) / APPLI_FWL", require that MFPlus code integrity is protected. In addition, the security functional requirement "Failure with preservation of secure state (FPT_FLS.1)" requires that in case of error on NVM, MFPlus execution is stopped. This meets the objective O.Verification-DESFire. Security objective “DESFire firewall (O.Firewall-DESFire)” 494 The justification related to the security objective “DESFire firewall (O.Firewall-DESFire)” is as follows: 495 The security functional requirements "Subset access control (FDP_ACC.1) / APPLI_FWL" and "Security attribute based access control (FDP_ACF.1) / APPLI_FWL", supported by "Static attribute initialisation (FMT_MSA.3) / APPLI_FWL", require that no application can read, write, compare any piece of data or code belonging to DESFire. This meets the objective O.Firewall-DESFire. Security objective “DESFire data cleaning for resource sharing (O.Shr-Res- DESFire)” 496 The justification related to the security objective “DESFire data cleaning for resource sharing (O.Shr-Res-DESFire)” is as follows: 497 The security functional requirement "Subset residual information protection (FDP_RIP.1) / DESFire" requires that the information content of a resource is made unavailable upon its deallocation from DESFire. This meets the objective O.Shr-Res-DESFire. 5.4.3 Additional security requirements are consistent "Cryptographic operation (FCS_COP.1) & key generation (FCS_CKM.1)" 498 These security requirements have already been argued in Section : Security objective “Additional Specific Security Functionality (AUG1.O.Add-Functions)” above. "Static attribute initialisation (FMT_MSA.3 / Memories), Management of security attributes (FMT_MSA.1 / Memories), Complete access control (FDP_ACC.2 / Memories), Security attribute based access control (FDP_ACF.1 / Memories)" 499 These security requirements have already been argued in Section : Security objective “Dynamic Area based Memory Access Control (AUG4.O.Mem-Access)” above. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 107/144 "Static attribute initialisation (FMT_MSA.3 / Loader), Management of security attributes (FMT_MSA.1 / Loader), Specification of management function (FMT_SMF.1 / Loader), Security roles (FMT_SMR.1 / Loader), Timing of identification (FIA_UID.1 / Loader), Timing of authentication (FIA_UAU.1 / Loader)" 500 These security requirements have already been argued in Section : Security objective “Protection against Abuse of Functionality (BSI.O.Abuse-Func)” and Section : Security objectives “Protection of the confidentiality of the TSF (ANSSI.O.Prot-TSF-Confidentiality)”, “Secure loading of the Additional Code (ANSSI.O.Secure-Load-ACode)” and “Secure loading of the Additional Memory Image (O.Secure-Load-AMemImage)” above. "Audit storage (FAU_SAS.1 / Loader), Audit review (FAU_SAR.1 / Loader)" 501 These security requirements have already been argued in Section : Security objective “Secure identification of the TOE (ANSSI.O.TOE-Identification)” and Section : Security objective “Secure identification of the Memory Image (O.MemImage-Identification)” above. "Failure with preservation of secure state (FPT_FLS.1 / Loader)" 502 This security requirement has already been argued in Section : Security objective “Secure activation of the Additional Code (ANSSI.O.Secure-AC-Activation)” and Section : Security objective “Secure identification of the Memory Image (O.MemImage-Identification)” above. "Inter-TSF trusted channel(FTP_ITC.1 / Sdiag), Audit review (FAU_SAR.1 / Sdiag), Limited capabilities (FMT_LIM.1 / Sdiag), Limited availability (FMT_LIM.2 / Sdiag) 503 These security requirements have already been argued in Section : Security objective “Protection against Abuse of Functionality (BSI.O.Abuse-Func)” above. "Security roles (FMT_SMR.1 / MFPlus), Subset access control (FDP_ACC.1 / MFPlus), Security attribute based access control (FDP_ACF.1 / MFPlus), Static attribute initialisation (FMT_MSA.3 / MFPlus), Management of security attributes (FMT_MSA.1 / MFPlus), Specification of TSF data (FMT_MTD.1 / MFPlus) Specification of management function (FMT_SMF.1 / MFPlus) Import of user data with security attributes (FDP_ITC.2 / MFPlus) Cryptographic key destruction (FCS_CKM.4 / MFPlus)" 504 These security requirements have already been argued in Section : Security objective “Access control for MFPlus (O.Access-Control-MFPlus)”, above. Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 108/144 SMD_ST31G480_ST_18_002 "User identification before any action (FIA_UID.2 / MFPlus), User authentication before any action (FIA_UAU.2 / MFPlus), Multiple authentication mechanisms (FIA_UAU.5 / MFPlus)" 505 These security requirements have already been argued in Section : Security objective “Authentication for MFPlus (O.Authentication-MFPlus)” and Section : Security objective “Confidential Communication (O.Encryption)” above. "Trusted path (FPT_TRP.1 / MFPlus), Replay detection (FPT_RPL.1 / MFPlus)" 506 These security requirements have already been argued in Section : Security objective “MFPlus Integrity-protected Communication (O.MAC-MFPlus)” above. Inter-TSF basic TSF data consistency (FPT_TDC.1 / MFPlus) 507 This security requirement has already been argued in Section : Security objective “Data type consistency (O.Type-Consistency-MFPlus)” above. "Unlinkability (FPR_UNL.1 / MFPlus)" 508 This security requirement has already been argued in Section : Security objective “Preventing traceability for MFPlus (O.No-Trace-MFPlus)” above. "Minimum and maximum quotas (FRU_RSA.2 / MFPlus)" 509 This security requirement has already been argued in Section : Security objective “NVM resource availability for MFPlus (O.Resource-MFPlus)” above. "Subset residual information protection (FDP_RIP.1 / MFPlus)" 510 This security requirement has already been argued in Section : Security objective “MFPlus data cleaning for resource sharing (O.Shr-Var-MFPlus)” above. "Security roles (FMT_SMR.1 / DESFire), Subset access control (FDP_ACC.1 / DESFire), Security attribute based access control (FDP_ACF.1 / DESFire), Static attribute initialisation (FMT_MSA.3 / DESFire), Management of security attributes (FMT_MSA.1 / DESFire), Specification of TSF data (FMT_MTD.1 / DESFire) Specification of management function (FMT_SMF.1 / DESFire) Import of user data with security attributes (FDP_ITC.2 / DESFire) Cryptographic key destruction (FCS_CKM.4 / DESFire)" 511 These security requirements have already been argued in Section : Security objective “Access control for DESFire (O.Access-Control-DESFire)” above. "User identification before any action (FIA_UID.2 / DESFire), User authentication before any action (FIA_UAU.2 / DESFire), Multiple authentication mechanisms (FIA_UAU.5 / DESFire)" 512 These security requirements have already been argued in Section : Security objective “Authentication for DESFire (O.Authentication-DESFire)” above. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 109/144 "Trusted path (FPT_TRP.1 / DESFire), Replay detection (FPT_RPL.1 / DESFire)" 513 These security requirements have already been argued in Section : Security objective “DESFire Confidential Communication (O.Confidentiality-DESFire)” above. "Inter-TSF basic TSF data consistency (FPT_TDC.1 / DESFire)" 514 This security requirement has already been argued in Section : Security objective “DESFire Data type consistency (O.Type-Consistency-DESFire)” above. "Basic rollback (FDP_ROL.1 / DESFire)" 515 This security requirement has already been argued in Section : Security objective “DESFire Transaction mechanism (O.Transaction-DESFire)” above. "Unlinkability (FPR_UNL.1 / DESFire)" 516 This security requirement has already been argued in Section : Security objective “Preventing traceability for DESFire (O.No-Trace-DESFire)” above. "Minimum and maximum quotas (FRU_RSA.2 / DESFire)" 517 This security requirement has already been argued in Section : Security objective “NVM resource availability for DESFire (O.Resource-DESFire)” above. "Subset access control (FDP_ACC.1 / APPLI_FWL), Security attribute based access control (FDP_ACF.1 / APPLI_FWL), Static attribute initialisation (FMT_MSA.3 / APPLI_FWL), 518 These security requirements have already been argued in Section : Security objective “Access control for MFPlus (O.Access-Control-MFPlus)” , Section : Security objective “MFPlus firewall (O.Firewall-MFPlus)”, and Section : Security objective “DESFire firewall (O.Firewall-DESFire)” above. "Subset residual information protection (FDP_RIP.1 / DESFire)" 519 This security requirement has already been argued in Section : Security objective “DESFire data cleaning for resource sharing (O.Shr-Res-DESFire)” above. 5.4.4 Dependencies of Security Functional Requirements 520 All dependencies of Security Functional Requirements have been fulfilled in this Security Target except : • those justified in the BSI-CC-PP-0084-2014 protection profile security requirements rationale, • those justifed in AUG security requirements rationale, • the dependency of FCS_COP.1 and FCS_CKM.1 on FCS_CKM.4 (see discussion below), • the dependency of FAU_SAR.1 / Loader on FAU_GEN.1 (see discussion below), • the dependency of FAU_SAR.1 / Sdiag on FAU_GEN.1 (see discussion below), • the dependency of FMT_MSA.3 / APPLI_FWL on FMT_MSA.1 and FMT_SMR.1 (see discussion below). Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 110/144 SMD_ST31G480_ST_18_002 521 Details are provided in Table 13 below. Table 13. Dependencies of security functional requirements Label Dependencies Fulfilled by security requirements in this Security Target Dependency already in BSI-CC-PP-0084-2014 or in AUG FRU_FLT.2 FPT_FLS.1 Yes Yes, BSI-CC-PP-0084-2014 FPT_FLS.1 None No dependency Yes, BSI-CC-PP-0084-2014 FMT_LIM.1 / Test FMT_LIM.2 / Test Yes Yes, BSI-CC-PP-0084-2014 FMT_LIM.2 / Test FMT_LIM.1 / Test Yes Yes, BSI-CC-PP-0084-2014 FMT_LIM.1 / Loader FMT_LIM.2 / Loader Yes Yes, BSI-CC-PP-0084-2014 FMT_LIM.2 / Loader FMT_LIM.1 / Loader Yes Yes, BSI-CC-PP-0084-2014 FMT_LIM.1 / Sdiag FMT_LIM.2 / Sdiag Yes Yes, BSI-CC-PP-0084-2014 FMT_LIM.2 / Sdiag FMT_LIM.1 / Sdiag Yes Yes, BSI-CC-PP-0084-2014 FAU_SAS.1 None No dependency Yes, BSI-CC-PP-0084-2014 FDP_SDC.1 None No dependency Yes, BSI-CC-PP-0084-2014 FDP_SDI.2 None No dependency Yes, BSI-CC-PP-0084-2014 FPT_PHP.3 None No dependency Yes, BSI-CC-PP-0084-2014 FDP_ITT.1 FDP_ACC.1 or FDP_IFC.1 Yes Yes, BSI-CC-PP-0084-2014 FPT_ITT.1 None No dependency Yes, BSI-CC-PP-0084-2014 FDP_IFC.1 FDP_IFF.1 No, see BSI-CC-PP- 0084-2014 Yes, BSI-CC-PP-0084-2014 FCS_RNG.1 None No dependency Yes, BSI-CC-PP-0084-2014 FCS_COP.1 [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1] Yes, by FDP_ITC.1 and FCS_CKM.1, see discussion below Yes, AUG #1 FCS_CKM.4 No, see discussion below FCS_CKM.1 [FDP_CKM.2 or FCS_COP.1] Yes, by FCS_COP.1 FCS_CKM.4 No, see discussion below FDP_ACC.2 / Memories FDP_ACF.1 / Memories Yes No, CCMB-2017-04-002 R5 FDP_ACF.1 / Memories FDP_ACC.1 / Memories Yes, by FDP_ACC.2 / Memories Yes, AUG #4 FMT_MSA.3 / Memories Yes ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 111/144 FMT_MSA.3 / Memories FMT_MSA.1 / Memories Yes Yes, AUG #4 FMT_SMR.1 / Memories No, see AUG #4 FMT_MSA.1 / Memories [FDP_ACC.1 / Memories or FDP_IFC.1] Yes, by FDP_ACC.2 / Memories and FDP_IFC.1 Yes, AUG #4 FMT_SMF.1 / Memories Yes No, CCMB-2017-04-002 R5 FMT_SMR.1 / Memories No, see AUG #4 Yes, AUG #4 FMT_SMF.1 / Memories None No dependency No, CCMB-2017-04-002 R5 FIA_API.1 None No dependency Yes, BSI-CC-PP-0084-2014 FTP_ITC.1 / Loader None No dependency Yes, BSI-CC-PP-0084-2014 FDP_UCT.1 / Loader [FTP_ITC.1 / Loader or FTP_TRP.1 / Loader] Yes, by FTP_ITC.1 / Loader Yes, BSI-CC-PP-0084-2014 [FDP_ACC.1 / Loader or FDP_IFC.1 / Loader] Yes, by FDP_ACC.1 / Loader FDP_UIT.1 / Loader [FTP_ITC.1 / Loader or FTP_TRP.1 / Loader] Yes, by FTP_ITC.1 / Loader Yes, BSI-CC-PP-0084-2014 [FDP_ACC.1 / Loader or FDP_IFC.1 / Loader] Yes, by FDP_ACC.1 / Loader FDP_ACC.1 / Loader FDP_ACF.1 / Loader Yes No, CCMB-2017-04-002 R5 FDP_ACF.1 / Loader FDP_ACC.1 / Loader Yes No, CCMB-2017-04-002 R5 FMT_MSA.3 / Loader Yes FMT_MSA.3 / Loader FMT_MSA.1 / Loader Yes No, CCMB-2017-04-002 R5 FMT_SMR.1 / Loader Yes Table 13. Dependencies of security functional requirements (continued) Label Dependencies Fulfilled by security requirements in this Security Target Dependency already in BSI-CC-PP-0084-2014 or in AUG Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 112/144 SMD_ST31G480_ST_18_002 FMT_MSA.1 / Loader [FDP_ACC.1 / Loader or FDP_IFC.1] Yes No, CCMB-2017-04-002 R5 FDP_SMF.1 / Loader Yes FDP_SMR.1 / Loader Yes FMT_SMR.1 / Loader FIA_UID.1 / Loader Yes No, CCMB-2017-04-002 R5 FIA_UID.1 / Loader None No dependency No, CCMB-2017-04-002 R5 FIA_UAU.1 / Loader FIA_UID.1 / Loader Yes No, CCMB-2017-04-002 R5 FDP_SMF.1 / Loader None No dependency No, CCMB-2017-04-002 R5 FPT_FLS.1 / Loader None No dependency No, CCMB-2017-04-002 R5 FAU_SAS.1 / Loader None No dependency Yes, BSI-CC-PP-0084-2014 FAU_SAR.1 / Loader FAU_GEN.1 No, by FAU_SAS.1 / Loader instead, see discussion below No, CCMB-2017-04-002 R5 FTP_ITC.1 / Sdiag None No dependency No, CCMB-2017-04-002 R5 FAU_SAR.1 / Sdiag FAU_GEN.1 No, see discussion below No, CCMB-2017-04-002 R5 FMT_SMR.1 / MFPlus FIA_UID.1 / MFPlus Yes, by FIA_UID.2 / MFPlus No, CCMB-2017-04-002 R5 FDP_ACC.1 / MFPlus FDP_ACF.1 / MFPlus Yes No, CCMB-2017-04-002 R5 FDP_ACF.1 / MFPlus FDP_ACC.1 / MFPlus Yes No, CCMB-2017-04-002 R5 FMT_MSA.3 / MFPlus Yes FMT_MSA.3 / MFPlus FMT_MSA.1 / MFPlus Yes No, CCMB-2017-04-002 R5 FMT_SMR.1 / MFPlus Yes Table 13. Dependencies of security functional requirements (continued) Label Dependencies Fulfilled by security requirements in this Security Target Dependency already in BSI-CC-PP-0084-2014 or in AUG ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 113/144 FMT_MSA.1 / MFPlus [FDP_ACC.1 / MFPlus or FDP_IFC.1] Yes, by FDP_ACC.1 / MFPlus No, CCMB-2017-04-002 R5 FMT_SMF.1 / MFPlus Yes FMT_SMR.1 / MFPlus Yes FMT_SMF.1 / MFPlus None No dependency No, CCMB-2017-04-002 R5 FDP_ITC.2 / MFPlus [FDP_ACC.1 / MFPlus or FDP_IFC.1] Yes, by FDP_ACC.1 / MFPlus No, CCMB-2017-04-002 R5 [FTP_ITC.1 or FPT_TRP.1 / MFPlus] Yes, by FPT_TRP.1 / MFPlus FPT_TDC.1 / MFPlus Yes FPT_TDC.1 / MFPlus None No dependency No, CCMB-2017-04-002 R5 FIA_UID.2 / MFPlus None No dependency No, CCMB-2017-04-002 R5 FIA_UAU.2 / MFPlus FIA_UID.1 Yes, by FIA_UID.2 / MFPlus No, CCMB-2017-04-002 R5 FIA_UAU.5 / MFPlus None No dependency No, CCMB-2017-04-002 R5 FMT_MTD.1 / MFPlus FMT_SMR.1 / MFPlus Yes No, CCMB-2017-04-002 R5 FMT_SMF.1 / MFPlus Yes FPT_TRP.1 / MFPlus None No dependency No, CCMB-2017-04-002 R5 FCS_CKM.4 / MFPlus [FDP_ITC.1 or FDP_ITC.2 / MFPlus or FCS_CKM.1] Yes, by FDP_ITC.2 / MFPlus No, CCMB-2017-04-002 R5 FPT_RPL.1 / MFPlus None No dependency No, CCMB-2017-04-002 R5 FPR_UNL.1 / MFPlus None No dependency No, CCMB-2017-04-002 R5 Table 13. Dependencies of security functional requirements (continued) Label Dependencies Fulfilled by security requirements in this Security Target Dependency already in BSI-CC-PP-0084-2014 or in AUG Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 114/144 SMD_ST31G480_ST_18_002 FRU_RSA.2 / MFPlus None No dependency No, CCMB-2017-04-002 R5 FDP_RIP.1 / MFPlus None No dependency No, CCMB-2017-04-002 R5 FMT_SMR.1 / DESFire FIA_UID.1 / DESFire Yes, by FIA_UID.2 / DESFire No, CCMB-2017-04-002 R5 FDP_ACC.1 / DESFire FDP_ACF.1 / DESFire Yes No, CCMB-2017-04-002 R5 FDP_ACF.1 / DESFire FDP_ACC.1 / DESFire Yes No, CCMB-2017-04-002 R5 FMT_MSA.3 / DESFire Yes FMT_MSA.3 / DESFire FMT_MSA.1 / DESFire Yes No, CCMB-2017-04-002 R5 FMT_SMR.1 / DESFire Yes FMT_MSA.1 / DESFire [FDP_ACC.1 / DESFire or FDP_IFC.1] Yes, by FDP_ACC.1 / DESFire No, CCMB-2017-04-002 R5 FMT_SMF.1 / DESFire Yes FMT_SMR.1 / DESFire Yes FMT_SMF.1 / DESFire None No dependency No, CCMB-2017-04-002 R5 FDP_ITC.2 / DESFire [FDP_ACC.1 / DESFire or FDP_IFC.1] Yes, by FDP_ACC.1 / DESFire No, CCMB-2017-04-002 R5 [FTP_ITC.1 or FPT_TRP.1 / DESFire] Yes, by FPT_TRP.1 / DESFire FPT_TDC.1 / DESFire Yes FPT_TDC.1 / DESFire None No dependency No, CCMB-2017-04-002 R5 FIA_UID.2 / DESFire None No dependency No, CCMB-2017-04-002 R5 FIA_UAU.2 / DESFire FIA_UID.1 Yes, by FIA_UID.2 / DESFire No, CCMB-2017-04-002 R5 Table 13. Dependencies of security functional requirements (continued) Label Dependencies Fulfilled by security requirements in this Security Target Dependency already in BSI-CC-PP-0084-2014 or in AUG ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 115/144 522 Part 2 of the Common Criteria defines the dependency of "Cryptographic operation (FCS_COP.1)" on "Import of user data without security attributes (FDP_ITC.1)" or "Import of user data with security attributes (FDP_ITC.2)" or "Cryptographic key generation (FCS_CKM.1)". In this particular TOE, "Cryptographic key generation (FCS_CKM.1)" may be used for the purpose of creating cryptographic keys, but also, the ES has all possibilities to implement its own creation function, in conformance with its security policy. FIA_UAU.5 / DESFire None No dependency No, CCMB-2017-04-002 R5 FMT_MTD.1 / DESFire FMT_SMR.1 / DESFire Yes No, CCMB-2017-04-002 R5 FMT_SMF.1 / DESFire Yes FPT_TRP.1 / DESFire None No dependency No, CCMB-2017-04-002 R5 FCS_CKM.4 / DESFire [FDP_ITC.1 or FDP_ITC.2 / DESFire or FCS_CKM.1] Yes, by FDP_ITC.2 / DESFire No, CCMB-2017-04-002 R5 FDP_ROL.1 / DESFire [FDP_ACC.1 / DESFire or FDP_IFC.1] Yes, by FDP_ACC.1 / DESFire No, CCMB-2017-04-002 R5 FPT_RPL.1 / DESFire None No dependency No, CCMB-2017-04-002 R5 FPR_UNL.1 / DESFire None No dependency No, CCMB-2017-04-002 R5 FRU_RSA.2 / DESFire None No dependency No, CCMB-2017-04-002 R5 FDP_ACC.1 / APPLI_FWL FDP_ACF.1 / APPLI_FWL Yes No, CCMB-2017-04-002 R5 FDP_ACF.1 / APPLI_FWL FDP_ACC.1 / APPLI_FWL Yes No, CCMB-2017-04-002 R5 FMT_MSA.3 / APPLI_FWL Yes FMT_MSA.3 / APPLI_FWL FMT_MSA.1 No, see discussion below No, CCMB-2017-04-002 R5 FMT_SMR.1 No, see discussion below FDP_RIP.1 / DESFire None No dependency No, CCMB-2017-04-002 R5 Table 13. Dependencies of security functional requirements (continued) Label Dependencies Fulfilled by security requirements in this Security Target Dependency already in BSI-CC-PP-0084-2014 or in AUG Security requirements (ASE_REQ) ST31G480 E01 platform Security Target for composition 116/144 SMD_ST31G480_ST_18_002 523 Part 2 of the Common Criteria defines the dependency of "Cryptographic operation (FCS_COP.1)" and "Cryptographic key generation (FCS_CKM.1)" on "Cryptographic key destruction (FCS_CKM.4)". In this particular TOE, there is no specific function for the destruction of the keys. The ES has all possibilities to implement its own destruction function, in conformance with its security policy. Therefore, FCS_CKM.4 is not defined in this ST. 524 Part 2 of the Common Criteria defines the dependency of "Audit review (FAU_SAR.1) / Loader" on "Audit data generation (FAU_GEN.1)". In this particular TOE, "Audit storage (FAU_SAS.1) / Loader" is used to ensure the storage of audit data, because FAU_GEN.1 is too comprehensive to be used in this context. Therefore this dependency is fulfilled by "Audit storage (FAU_SAS.1) / Loader" instead. 525 Part 2 of the Common Criteria defines the dependency of "Audit review (FAU_SAR.1) / Sdiag" on "Audit data generation (FAU_GEN.1)". In this particular TOE, there is no specific function for audit data generation, the data to be audited are just stored. Therefore, FAU_GEN.1 is not defined in this ST. 526 Part 2 of the Common Criteria defines the dependency of "Static attribute initialisation (FMT_MSA.3) / APPLI_FWL" on "Management of security attributes (FMT_MSA.1)" and "Security roles (FMT_SMR.1)". For this particular instantiation of the access control attributes aimed at protecting DESFire and MFPlus code and data from unauthorised accesses, the security attributes are only static, initialized at product start. Therefore, there is no need to identify management capabilities and associated roles in form of Security Functional Requirements "FMT_MSA.1" and "FMT_SMR.1". 5.4.5 Rationale for the Assurance Requirements Security assurance requirements added to reach EAL5 (Table 10) 527 Regarding application note 21 of BSI-CC-PP-0084-2014, this Security Target chooses EAL5 with augmentations because developers and users require a high level of independently assured security in a planned development and require a rigorous development approach without incurring unreasonable costs attributable to specialist security engineering techniques. 528 EAL5 represents a meaningful increase in assurance from EAL4 by requiring semiformal design descriptions, a more structured (and hence analyzable) architecture, and improved mechanisms and/or procedures that provide confidence that the TOE will not be tampered during development. 529 The assurance components in an evaluation assurance level (EAL) are chosen in a way that they build a mutually supportive and complete set of components. All dependencies introduced by the requirements chosen for augmentation are fulfilled. Therefore, these components add additional assurance to EAL5, but the mutual support of the requirements and the internal consistency is still guaranteed. 530 Note that detailed and updated refinements for assurance requirements are given in Section 5.3. Dependencies of assurance requirements 531 Dependencies of security assurance requirements are fulfilled by the EAL5 package selection. ST31G480 E01 platform Security Target for composition Security requirements (ASE_REQ) SMD_ST31G480_ST_18_002 117/144 532 The augmentation to this package identified in paragraph 407 does not introduce dependencies not already satisfied by the EAL5 package, and is considered as consistent augmentation: • ALC_FLR.1 has no dependency. • ASE_TSS.2 dependencies (ASE_INT.1, ASE_REQ.1 and ADV_ARC.1) are fulfilled by the assurance requirements claimed by this ST. TOE summary specification (ASE_TSS) ST31G480 E01 platform Security Target for composition 118/144 SMD_ST31G480_ST_18_002 6 TOE summary specification (ASE_TSS) 533 This section demonstrates how the TOE meets each Security Functional Requirement, which will be further detailed in the ADV_FSP documents. 6.1 Limited fault tolerance (FRU_FLT.2) 534 The TSF provides limited fault tolerance, by managing a certain number of faults or errors that may happen, related to random number generation, power supply, data flows and cryptographic operations, thus preventing risk of malfunction. 6.2 Failure with preservation of secure state (FPT_FLS.1) 535 The TSF provides preservation of secure state by detecting and managing the following events, resulting in an immediate interruption or reset: • Die integrity violation detection, • Errors on memories, • Glitches, • High voltage supply, • CPU errors, • MPU errors, • External clock incorrect frequency, • Sequence control, • etc.. 536 The ES can generate a software reset. 6.3 Limited capabilities (FMT_LIM.1) / Test, Limited capabilities (FMT_LIM.1) / Sdiag, Limited capabilities (FMT_LIM.1) / Loader, Limited availability (FMT_LIM.2) / Test, Limited availability (FMT_LIM.2) / Sdiag & Limited availability (FMT_LIM.2) / Loader 537 The TOE is either in Test, Admin or User configuration. 538 The TOE may also be in Basic Diagnostic (aka Diagnostic), Secure Diagnostic or Genuine Check volatile configuration. 539 The Test and Diagnostics configurations are reserved to ST. 540 The TSF ensures the switching and the control of TOE configuration, the corresponding access control and the control of the corresponding capabilities.The transition controls rely on several strong mechanisms including fuse, authentication and control registers. Part of the transitions are only possible in the STMicroelectronics audited environment. 541 The TSF reduces the available features depending on the TOE configuration. 542 The customer can choose to disable irreversibly the Loading capability. ST31G480 E01 platform Security Target for composition TOE summary specification (ASE_TSS) SMD_ST31G480_ST_18_002 119/144 543 The customer can choose to irreversibly enable or disable the Secure Diagnostic capability. Only if the customer enables it, for quality investigation purpose, ST can exercise the Secure Diagnostic capability with a secure protocol, in an audited environment. 6.4 Inter-TSF trusted channel (FTP_ITC.1) / Sdiag 544 In Secure Diagnostic volatile configuration, the System Firmware provides a secure channel to allow another IT product to operate a Secure Diagnostic transaction. 6.5 Audit review (FAU_SAR.1) / Sdiag 545 The System Firmware allows to read the Secure Diagnostic status (permanently disabled, permanently enabled, disabled but still configurable). 6.6 Stored data confidentiality (FDP_SDC.1) 546 The TSF ensures confidentiality of the User Data, thanks to the following features: • Memories scrambling and encryption, • Protection of NVM sectors, • MPU, • LPU. 6.7 Stored data integrity monitoring and action (FDP_SDI.2) 547 The TSF ensures stored data integrity, thanks to the following features: • Memories parity control, • Protection of NVM sectors, • MPU, • LPU. 6.8 Audit storage (FAU_SAS.1) 548 In User configuration, the TOE provides commands to store data and/or pre-personalisation data and/or supplements of the ES in the NVM. These commands are only available to authorized processes, and only until phase 6. 6.9 Resistance to physical attack (FPT_PHP.3) 549 The TSF ensures resistance to physical tampering, thanks to the following features: • The TOE implements a set of countermeasures that reduce the exploitability of physical probing. • The TOE is physically protected by active shields that command an automatic reaction on die integrity violation detection. TOE summary specification (ASE_TSS) ST31G480 E01 platform Security Target for composition 120/144 SMD_ST31G480_ST_18_002 6.10 Basic internal transfer protection (FDP_ITT.1), Basic internal TSF data transfer protection (FPT_ITT.1) & Subset information flow control (FDP_IFC.1) 550 The TSF prevents the disclosure of internal and user data thanks to: • Memories scrambling and encryption, • Bus encryption, • Mechanisms for operation execution concealment, • Leakage protection in libraries. 6.11 Random number generation (FCS_RNG.1) 551 The TSF provides 8-bit true random numbers that can be qualified with the test metrics required by the BSI-AIS20/AIS31 standard for a PTG.2 class device. 6.12 Cryptographic operation: TDES operation (FCS_COP.1) / TDES 552 The EDES+ accelerator has the capability to perform Triple DES encryption and decryption in Electronic Code Book (ECB) and Cipher Block Chaining (CBC) mode conformant to NIST SP 800-67 and NIST SP 800-38A. If Neslib is embedded, the cryptographic library Neslib instantiates the same standard DES cryptographic operations. 553 The DESFire library uses Triple DES as cryptographic operation (EDES+ accelerator). Cryptographic operations are used for setting up the mutual authentication, for encryption and message authentication. 6.13 Cryptographic operation: AES operation (FCS_COP.1) / AES 554 The AES accelerator provides the following standard AES cryptographic operations for key sizes of 128, 192 and 256 bits, conformant to FIPS PUB 197 with intrinsic counter-measures against attacks: • cipher, • inverse cipher, 555 The AES accelerator can operate in Electronic Code Book (ECB) and Cipher Block Chaining (CBC) mode. 556 If NesLib is embedded, the cryptographic library NesLib instantiates the same standard AES cryptographic operations, and additionally provides: • message authentication Code computation (CMAC), • authenticated encryption/decryption in Galois Counter Mode (GCM), • authenticated encryption/decryption in Counter with CBC-MAC (CCM). ST31G480 E01 platform Security Target for composition TOE summary specification (ASE_TSS) SMD_ST31G480_ST_18_002 121/144 557 The DESFire and MFPlus libraries use AES as cryptographic operation (AES accelerator). Cryptographic operations are used for setting up the mutual authentication, for encryption and message authentication. 6.14 Cryptographic operation: RSA operation (FCS_COP.1) / RSA if NesLib only 558 The cryptographic library NesLib provides to the ES developer the following RSA functions, all conformant to PKCS #1 V2.1: • RSA public key cryptographic operation for modulus sizes up to 4096 bits, • RSA private key cryptographic operation with or without CRT for modulus sizes up to 4096 bits, • RSA signature formatting, • RSA Key Encapsulation Method. 6.15 Cryptographic operation: Elliptic Curves Cryptography operation (FCS_COP.1) / ECC if NesLib only 559 The cryptographic library NesLib provides to the ES developer the following efficient basic functions for Elliptic Curves Cryptography over prime fields on curves in Weierstrass form, all conformant to IEEE 1363-2000 and IEEE 1363a-2004, including: • private scalar multiplication, • preparation of Elliptic Curve computations in affine coordinates, • public scalar multiplication, • point validity check, • Jacobian conversion to affine coordinates, • general point addition, • point expansion and compression. 560 Additionally, the cryptographic library NesLib provides functions dedicated to the two most used elliptic curves cryptosystems: • Elliptic Curve Diffie-Hellman (ECDH), as specified in NIST SP 800-56A, • Elliptic Curve Digital Signature Algorithm (ECDSA) generation and verification, as stipulated in FIPS PUB 186-4 and specified in ANSI X9.62, section 7. 561 The cryptographic library NesLib provides to the ES developer the following efficient basic functions for Elliptic Curves Cryptography over prime fields on curves in Edwards form, with curve 25519, all conformant to EdDSA rfc, including: • generation, • verification, • point decompression. TOE summary specification (ASE_TSS) ST31G480 E01 platform Security Target for composition 122/144 SMD_ST31G480_ST_18_002 6.16 Cryptographic operation: SHA-1 & SHA-2 operation (FCS_COP.1) / SHA, if NesLib only 562 The cryptographic library NesLib provides the SHA-1, SHA-224, SHA-256, SHA-384, SHA- 512 secure hash functions conformant to FIPS PUB 180-2. 563 The cryptographic library NesLib provides the SHA-1, SHA-256, SHA-384, SHA-512 secure hash functions conformant to FIPS PUB 180-2, and offering resistance against side channel and fault attacks. 564 Additionally, the cryptographic library NesLib offers support for the HMAC mode of use, as specified in FIPS PUB 198-1, to be used in conjunction with the protected versions of SHA-1, SHA-256, SHA-384, and SHA-512. 6.17 Cryptographic operation: Keccak & SHA-3 operation (FCS_COP.1) / Keccak, if NesLib only 565 The cryptographic library NesLib provides the operation of the following extendable output functions conformant to FIPS PUB 202: • SHAKE128, • SHAKE256, • Keccak[r,c] with choice of r < 1600 and c = 1600 - r. 566 The cryptographic library NesLib provides the operation of the following hash functions, conformant to FIPS PUB 202: • SHA3-224, • SHA3-256, • SHA3-384, • SHA3-512. 567 The cryptographic library NesLib provides the operation of the following extendable output functions conformant to FIPS PUB 202, offering resistance against side channel and fault attacks: • SHAKE128, • SHAKE256, • Keccak[r,c] with choice of r < 1600 and c = 1600 - r. 568 The cryptographic library NesLib provides the operation of the following hash functions, conformant to FIPS PUB 202, offering resistance against side channel and fault attacks: • SHA3-224, • SHA3-256, • SHA3-384, • SHA3-512. ST31G480 E01 platform Security Target for composition TOE summary specification (ASE_TSS) SMD_ST31G480_ST_18_002 123/144 6.18 Cryptographic operation: Keccak-p operation (FCS_COP.1) / Keccak-p, if NesLib only 569 The cryptographic library NesLib provides a toolbox for building modes on top of the following permutations, conformant to FIPS PUB 202: • Keccak-p[1600,n_r = 24], • Keccak-p[1600,n_r = 12]. • The cryptographic library NesLib provides a toolbox for building modes on top of the following permutations, conformant to FIPS PUB 202, offering resistance against side channel and fault attacks: • Keccak-p[1600,n_r = 24], • Keccak-p[1600,n_r = 12]. 6.19 Cryptographic operation: Diffie-Hellman operation (FCS_COP.1) / Diffie-Hellman, if NesLib only 570 The cryptographic library NesLib provides the Diffie-Hellman key establishment operation over GF(p) for size of modulus p up to 4096 bits, conformant to ANSI X9.42. 6.20 Cryptographic operation: DRBG operation (FCS_COP.1) / DRBG, if NesLib only 571 The cryptographic library NesLib gives support for a DRBG generator, based on cryptographic algorithms specified in NIST SP 800-90. 572 The cryptographic library NesLib implements two of the DRBG specified in NIST SP 800-90: • Hash-DRBG, • CTR-DRBG. 6.21 Cryptographic key generation: Prime generation (FCS_CKM.1) / Prime_generation, if NesLib only 573 The cryptographic library NesLib provides prime numbers generation for prime sizes up to 2048 bits conformant to FIPS PUB 140-2 and FIPS PUB 186-4, optionally with conditions and/or optionally offering resistance against side channel and fault attacks. 6.22 Cryptographic key generation: RSA key generation (FCS_CKM.1) / RSA_key_generation, if NesLib only 574 The cryptographic library NesLib provides standard RSA public and private key computation for key sizes upto 4096 bits conformant to FIPS PUB 140-2, ISO/IEC 9796-2 and PKCS #1 V2.1, optionally with conditions and/or optionally offering resistance against side channel and fault attacks. TOE summary specification (ASE_TSS) ST31G480 E01 platform Security Target for composition 124/144 SMD_ST31G480_ST_18_002 6.23 Static attribute initialisation (FMT_MSA.3) / Memories 575 The TOE enforces a default memory protection policy when none other is programmed by the ES. 6.24 Management of security attributes (FMT_MSA.1) / Memories & Specification of management functions (FMT_SMF.1) / Memories 576 The TOE provides a dynamic Memory Protection Unit (MPU), that can be configured by the ES. 6.25 Complete access control (FDP_ACC.2) / Memories & Security attribute based access control (FDP_ACF.1) / Memories 577 The TOE enforces the dynamic memory protection policy for data access and code access thanks to a dynamic Memory Protection Unit (MPU), programmed by the ES. Overriding the MPU set of access rights, the TOE enforces additional protections on specific parts of the memories. 6.26 Authentication Proof of Identity (FIA_API.1) 578 In Admin configuration or Genuine check configuration, the System Firmware provides commands based on a cryptographic mechanism which allows another IT product to check that the TOE is a genuine TOE. 6.27 Inter-TSF trusted channel (FTP_ITC.1) / Loader, Basic data exchange confidentiality (FDP_UCT.1) / Loader, Data exchange integrity (FDP_UIT.1) / Loader & Audit storage (FAU_SAS.1) / Loader 579 In Admin configuration, the System Firmware provides a secure channel to allow another IT product to operate a maintenance transaction. 580 The ciphered data is automatically decrypted then stored in the requested memory. 581 A maintenance transaction can end only after a successful integrity check of the loaded data or an erase. The identification data associated with the memory update is automatically logged during the session, 6.28 Subset access control (FDP_ACC.1) / Loader & Security attribute based access control (FDP_ACF.1) / Loader 582 In Admin configuration, during a maintenance transaction, the System Firmware verifies if the Loader access conditions are satisfied and returns an error when this is not the case. ST31G480 E01 platform Security Target for composition TOE summary specification (ASE_TSS) SMD_ST31G480_ST_18_002 125/144 583 In particular, the additional memory update must be intended to be assembled with the memory update previously loaded. 6.29 Failure with preservation of secure state (FPT_FLS.1) / Loader 584 In Admin configuration, the System Firmware enforces that a maintenance transaction can only end when it is consistent or canceled by an erase. 6.30 Static attribute initialisation (FMT_MSA.3) / Loader 585 In Admin configuration, the System Firmware provides restrictive default values for the Flash Loader security attributes. 6.31 Management of security attributes (FMT_MSA.1) / Loader & Specification of management functions (FMT_SMF.1) / Loader 586 In Admin configuration, the System Firmware provides the capability for an authorized user to change part of the Flash Loader security attributes. 6.32 Security roles (FMT_SMR.1) / Loader 587 The System Firmware supports the assignment of roles to users through the assignment of different keys for the different roles. This allows to distinguish between the roles of ST Loader, User Loader, Delegated Loader, Secure Diagnostic, and Everybody. 6.33 Timing of identification (FIA_UID.1) / Loader & Timing of authentication (FIA_UAU.1) / Loader 588 The System Firmware identifies the user through the key selected for authentication. This is performed by verifying an encryption, thus preventing to unveil the key. 589 After this authentication, both parties share a session key. 590 A limited number of operations is allowed on behalf of the user before the user is identified and authenticated, such as boot, authentication and non-critical queries. 6.34 Audit review (FAU_SAR.1) / Loader 591 In Admin configuration, the System Firmware allows to read the product information and the identification data of all memory updates previously loaded on the TOE. TOE summary specification (ASE_TSS) ST31G480 E01 platform Security Target for composition 126/144 SMD_ST31G480_ST_18_002 6.35 Security roles (FMT_SMR.1) / MFPlus 592 MFPlus identifies the user to be authenticated by the key block number indicated in the authentication request. 593 In security level 0 when the TOE is in a secure environment, MFPlus identifies and authenticates the role Personaliser by default ; in addition the role Originality Key User can be identified with an explicit authentication request. 594 In the other security levels, MFPlus identifies and authenticates the role Anybody by default and before any authentication request. The roles Card Administrator, Card Manager, Card Security Level Manager, Card User and Originality Key User are authenticated during the authentication request by the knowledge of the respective cryptographic keys. 6.36 Subset access control (FDP_ACC.1) / MFPlus 595 For each MFPlus command subject to access control, the MFPlus library verifies if the MFPlus access conditions are satisfied and returns an error when this is not the case. 6.37 Security attribute based access control (FDP_ACF.1) / MFPlus 596 The MFPlus library verifies the MFPlus security attributes during the execution of MFPlus commands to enforce the MFPlus Access Control Policy defined by the MFPlus interface specification: 597 MFPlus assigns Card Users to 2 different groups of operations on blocks. The operations are "read" or "write". There are several sets of predefined access conditions which may be assigned to each sector. These sets can also contain the access condition "never" for one group of operations. Card Users can also modify the sector trailer or the AES sector keys, if the access conditions allow this. 598 The Originality Key User is not allowed to perform any action on objects, but with a successful authentication he can prove the authenticity of the Card. 599 The Card Administrator can change the Level 3 Switch Key and the Card Master Key. 600 The Card Manager can modify the Field Configuration Block, which are attributes that may have to be changed in the field. He is also allowed to change the Card Configuration Key. 601 The Card Security Level Manager can switch the security level of the card to level 3 by authenticating with the corresponding key. 6.38 Static attribute initialisation (FMT_MSA.3) / MFPlus 602 The MFPlus library initialises all the static attributes to the values defined by MFPlus interface specifications before they can be used by the Embedded Software. ST31G480 E01 platform Security Target for composition TOE summary specification (ASE_TSS) SMD_ST31G480_ST_18_002 127/144 6.39 Management of security attributes (FMT_MSA.1) / MFPlus 603 The MFPlus library verifies the MFPlus security attributes during the execution of MFPlus commands to enforce the Access Control Policy on the security attributes. 6.40 Specification of Management Functions (FMT_SMF.1) / MFPlus 604 The MFPlus library implements the management functions defined by the MFPlus interface specifications for authentication, and changing security attributes. 6.41 Import of user data with security attributes (FDP_ITC.2) / MFPlus 605 The MFPlus library implements the MFPlus interface specifications and enforces the Access Control Policy to associate the user data to the security attributes. 6.42 Inter-TSF basic TSF data consistency (FPT_TDC.1) / MFPlus 606 The MFPlus library implements the MFPlus interface specifications, supporting consistent interpretation and modification control of inter-TSF exchanges. 6.43 Cryptographic key destruction (FCS_CKM.4) / MFPlus 607 The MFPlus library erases key values from memory after their context becomes obsolete. 6.44 User identification before any action (FIA_UID.2) / MFPlus 608 The MFPlus library identifies the user through the key selected for authentication as specified by the MFPlus Interface Specification. 6.45 User authentication before any action (FIA_UAU.2) / MFPlus 609 During the authentication, the MFPlus library verifies that the user knows the selected key. This is performed by verifying an encryption, thus preventing to unveil the key. 610 After this authentication, both parties share a session key. 6.46 Multiple authentication mechanisms (FIA_UAU.5) / MFPlus 611 The MFPlus library implements the MFPlus Interface Specification, that has a mechanism to authenticate Card Administrator, Card Manager, Card Security Level Manager, Card User, and Originality Key User, while Everybody is assumed when there is no valid authentication state. TOE summary specification (ASE_TSS) ST31G480 E01 platform Security Target for composition 128/144 SMD_ST31G480_ST_18_002 6.47 Management of TSF data (FMT_MTD.1) / MFPlus 612 The MFPlus library implements the MFPlus Interface Specification, restricting key modifications in ways configurable through the security attributes to authenticated users, or disabling key modification capabilities. 6.48 Trusted path (FTP_TRP.1) / MFPlus 613 The MFPlus library implements the MFPlus Interface Specification allowing to establish and enforce a trusted path between itself and remote users. 614 The mechanisms include encryption of keys and CMAC on commands and responses. 6.49 Replay detection (FPT_RPL.1) / MFPlus 615 The MFPlus library implements the MFPlus authentication command, and authenticated commands, that allow replay detection. 6.50 Unlinkability (FPR_UNL.1) / MFPlus 616 MFPlus provides an Administrator option to use random UID during the ISO 14443 anti- collision sequence, preventing the traceability through UID. At higher level, the MFPlus access control - when configured for this purpose - provides traceability protection. 6.51 Minimum and maximum quotas (FRU_RSA.2) / MFPlus 617 The MFPlus library ensures the memory required for its operation is available. 6.52 Subset residual information protection (FDP_RIP.1) / MFPlus 618 At the end of commands execution or upon interrupt, the MFPlus library cleans the confidential data from registers it uses. 6.53 Security roles (FMT_SMR.1) / DESFire 619 DESFire supports the assignment of roles to users through the assignment of different keys for the different roles and through the structure and configuration of the access rights. This allows to distinguish between the roles of Administrator, Application Manager, Application User, and Everybody. 6.54 Subset access control (FDP_ACC.1) / DESFire 620 For each DESFire command subject to access control, the DESFire library verifies if the DESFire access conditions are satisfied and returns an error when this is not the case. ST31G480 E01 platform Security Target for composition TOE summary specification (ASE_TSS) SMD_ST31G480_ST_18_002 129/144 6.55 Security attribute based access control (FDP_ACF.1) / DESFire 621 The DESFire library verifies the DESFire security attributes during the execution of DESFire commands to enforce the Access Control Policy defined by the DESFire interface specification. 6.56 Static attribute initialisation (FMT_MSA.3) / DESFire 622 The DESFire library initialises all the static attributes to the values defined by DESFire interface specifications before they can be used by the Embedded Software. 6.57 Management of security attributes (FMT_MSA.1) / DESFire 623 The DESFire library verifies the DESFire security attributes during the execution of DESFire commands to enforce the Access Control Policy on the security attributes. 6.58 Specification of Management Functions (FMT_SMF.1) / DESFire 624 The DESFire library implements the management functions defined by the DESFire interface specifications for authentication, changing security attributes and creating or deleting an application, a value or a data file. 6.59 Import of user data with security attributes (FDP_ITC.2) / DESFire 625 The DESFire library implements the DESFire interface specifications and enforces the Access Control Policy to associate the user data to the security attributes. 6.60 Inter-TSF basic TSF data consistency (FPT_TDC.1) / DESFire 626 The DESFire library implements the DESFire interface specifications, supporting consistent interpretation and modification control of inter-TSF exchanges. 6.61 Cryptographic key destruction (FCS_CKM.4) / DESFire 627 The DESFire library erases key values from memory after their context becomes obsolete. 6.62 User identification before any action (FIA_UID.2) / DESFire 628 The DESFire library identifies the user through the key selected for authentication as specified by the DESFire Interface Specification. TOE summary specification (ASE_TSS) ST31G480 E01 platform Security Target for composition 130/144 SMD_ST31G480_ST_18_002 6.63 User authentication before any action (FIA_UAU.2) / DESFire 629 During the authentication, the DESFire library verifies that the user knows the selected key. 630 After this authentication, both parties share a session key. 6.64 Multiple authentication mechanisms (FIA_UAU.5) / DESFire 631 The DESFire library implements the DESFire Interface Specification, that has a mechanism to authenticate Administrator, Application Manager and Application User, while Everybody is assumed when there is no valid authentication state. 632 Two types of authentication are supported: the native DESFire 3-pass authentication and the ISO authentication. 6.65 Management of TSF data (FMT_MTD.1) / DESFire 633 The DESFire library implements the DESFire Interface Specification, restricting key modifications in ways configurable through the security attributes to authenticated users, or disabling key modification capabilities. 6.66 Trusted path (FTP_TRP.1) / DESFire 634 The DESFire library implements the DESFire Interface Specification allowing to establish and enforce a trusted path between itself and remote users. 6.67 Basic rollback (FDP_ROL.1) / DESFire 635 The DESFire library implements the DESFire transaction mechanism ensuring that either all or none of the (modifying) file commands within a transaction are performed. If not, they are rolled back. 6.68 Replay detection (FPT_RPL.1) / DESFire 636 The DESFire library implements the DESFire authentication command, and authenticated commands, that allow replay detection. 6.69 Unlinkability (FPR_UNL.1) / DESFire 637 DESFire provides an Administrator option to use random UID during the ISO 14443 anti- collision sequence, preventing the traceability through UID. At higher level, the DESFire access control - when configured for this purpose - provides traceability protection. 6.70 Minimum and maximum quotas (FRU_RSA.2) / DESFire 638 The DESFire library ensures the memory required for its operation is available. ST31G480 E01 platform Security Target for composition TOE summary specification (ASE_TSS) SMD_ST31G480_ST_18_002 131/144 6.71 Subset residual information protection (FDP_RIP.1) / DESFire 639 At the end of commands execution or upon interrupt, the DESFire library cleans the confidential data from registers it uses. 6.72 Subset access control (FDP_ACC.1) / APPLI_FWL & Security attribute based access control (FDP_ACF.1) / APPLI_FWL 640 The Library Protection Unit is used to isolate DESFire or MFPlus firmware (code and data) from the rest of the code embedded in the device. 6.73 Static attribute initialisation (FMT_MSA.3) / APPLI_FWL 641 At product start, all the static attributes are initialised, which are needed to protect the segments where the code and data of DESFire or MFPlus are stored. Identification ST31G480 E01 platform Security Target for composition 132/144 SMD_ST31G480_ST_18_002 7 Identification Table 14. TOE components IC Maskset name IC version Master identification number (1) Firmware version OST version Optional NesLib crypto library version Optional MIFARE DESFire EV1 version Optional MIFARE Plus X version K8L0B J 00B8h 3.0.1 3.4 6.2.1 4.8.12 2.4.6 1. Part of the product information. Table 15. Guidance documentation Component description Reference Version ST31G platform - ST31G480 - Secure dual interface microcontroller with enhanced security and up to 480 Kbytes of Flash memory - Datasheet DS_ST31G480 4.0 ARM® Cortex SC000 Technical Reference Manual ARM_DDI_0456 A ARMv6-M Architecture Reference Manual ARM_DDI_0419 C ST31 Firmware V3 User Manual UM_ST31G_H_FWv3 6 NesLib 6.2 library - User manual UM_NESLIB_6.2 1 ST31G and ST31H Secure MCU family - NesLib 6.2 security recommendations AN_SECU_ST31_NESLIB_ 6.2 4 NesLib 6.2.1 for ST31 Platforms - Release note RN_ST31_NESLIB_6.2.1 2 ST31G and ST31H Secure MCU platforms Security Guidance AN_SECU_ST31G_H 5.0 ST31G and ST31H - AIS31 Compliant Random Number - User Manual UM_31G_31H_AIS31 1.0 ST31 - AIS31 Reference implementation - Startup, online and total failure tests - Application Note AN_31G_31H_AIS31 1.0 MIFARE DESFire EV1 library 4.8 for ST31G480 - User manual UM_31_MFDF_EV1_4.8 4.0 MIFARE DESFire EV1 library 4.8.12 for ST31G480 - Appli note AN_ST31G480_MFD_Lib 3.0 MIFARE DESFire EV1 lnterface Specification: User Manual UM_Mifare_Desfire_EV1_I nterface 5.0 MIFARE Plus X library 2.4 for ST31G480 - User manual UM_MIFARE_PLUS_X_2_ 4 5.0 MIFARE Plus X library 2.4.6 for ST31G480 - Application note AN_ST31G480_MFP-X_Lib 1.0 ST31G480 E01 platform Security Target for composition Identification SMD_ST31G480_ST_18_002 133/144 Table 16. Sites list Site Address Activities(1) ST Rousset STMicroelectronics 190 Avenue Célestin Coq ZI de Rousset-Peynier 13106 Rousset Cedex FRANCE DEV FE EWS WHS ST Ang Mo Kio 1 STMicroelectronics 5A Serangoon North Avenue 5 554574 Singapore DEV ST Zaventem STMicroelectronics Green Square, Lambroekstraat 5, Building B 3d floor 1831 Diegem/Machelen Belgium DEV ST Grenoble STMicroelectronics 12 rue Jules Horowitz, BP 217 38019 Grenoble Cedex France DEV ST Rennes STMicroelectronics 10 rue de Jouanet, ePark 35700 Rennes France DEV ST Sophia STMicroelectronics 635 route des lucioles 06560 Valbonne France DEV ST Tunis STMicroelectronics Cité Technologique des Communications, BP 21 2088 La Gazelle Cedex Tunisia IT ST Gardanne CMP Georges Charpak 880 Avenue de Mimet 13541 Gardanne France BE ST Crolles STMicroelectronics 850 rue Jean Monnet 38926 Crolles France FE MASK Identification ST31G480 E01 platform Security Target for composition 134/144 SMD_ST31G480_ST_18_002 ST Toa Payoh STMicroelectronics 629 Lorong 4/6 Toa Payoh 319521 Singapore EWS ST Shenzen STS Microelectronics 16 Tao hua Rd., Futian free trade zone 518048 Shenzhen P.R. China BE WHS ST Bouskoura STMicroelectronics 101 Boulevard des Muriers – BP97 20 180 Bouskoura Maroc BE WHS ST Calamba STMicroelectronics 9 Mountain Drive, LISP II, Brgy La mesa Calamba 4027 Philipines BE WHS ST Ang Mo Kio 6 STMicroelectronics 18 Ang Mo Kio Industrial park 2 554574 Singapore BE WHS ST Loyang STMicroelectronics 7 Loyang Drive 508938 Singapore WHS Amkor ATP1 AMKOR Technologies ATP1: Km 22 East Service Rd. South superhighway, Muntipula City 1771 Philippines BE Amkor ATP3/4 AMKOR Technologies ATP3/4: 119 N. Science Avenue, Laguna Technopark, Binan, Laguna, 4024 Philippines BE Smartflex Smartflex Technologies 27 Ubi road 4, MSL building #04-04, 408618 Singapore BE Chipbond JY Chipbond Technology Corporation No. 10, Prosperity 1 Road, Science Park Hsinchu, Taiwan R.O.C. BE Table 16. Sites list (continued) Site Address Activities(1) ST31G480 E01 platform Security Target for composition Identification SMD_ST31G480_ST_18_002 135/144 Chipbond LH Chipbond Technology Corporation No. 3, Li Hsin 5 Road, Science Park Hsinchu Taiwan R.O.C. BE STATS JSCC 188 Huaxu Rd, Qingpu district, 201702 Shanghai, P.R. China BE Feiliks Feili Logistics (Shenzhen) CO., Ltd Zhongbao Logistics Building, No. 28 Taohua Road, FFTZ, Shenzhen, Guangdong 518038, China WHS DNP Dai Nippon printing Co ltd. 2-2-1 Kami-Fukuoka, Fujimino-shi, Saitama,356-8507, Japan MASK DPE Dai Nippon Printing Europe Via C. Olivetti 2/A I-20041 Agrate Brianza Italy MASK 1. Activities: DEV = development (Phase 2), MASK = mask manufacturing (Phase 2), IT = Network infrastructure (Phase 2), FE = front end manufacturing (Phase 3), EWS = electrical wafer sort (Phase 3), WHS = warehouse (Phases 3/4), BE = back end manufacturing (Phase 4). Table 16. Sites list (continued) Site Address Activities(1) References ST31G480 E01 platform Security Target for composition 136/144 SMD_ST31G480_ST_18_002 8 References Table 17. Common Criteria Component description Reference Version Common Criteria for Information Technology Security Evaluation - Part 1: Introduction and general model, April 2017 CCMB-2017-04-001 R5 3.1 Rev 5 Common Criteria for Information Technology Security Evaluation - Part 2: Security functional components, April 2017 CCMB-2017-04-002 R5 3.1 Rev 5 Common Criteria for Information Technology Security Evaluation - Part 3: Security assurance components, April 2017 CCMB-2017-04-003 R5 3.1 Rev 5 Table 18. Protection Profile Component description Reference Version Eurosmart - Security IC Platform Protection Profile with Augmentation Packages BSI-CC-PP-0084-2014 1.0 Table 19. Other standards Ref Identifier Description [1] BSI-AIS20/AIS31 A proposal for: Functionality classes for random number generators, W. Killmann & W. Schindler BSI, Version 2.0, 18-09-2011 [2] NIST SP 800-67 NIST SP 800-67, Recommendation for the Triple Data Encryption Algorithm (TDEA) Block Cipher, revised January 2012, National Institute of Standards and Technology [3] FIPS PUB 140-2 FIPS PUB 140-2, Security Requirements for Cryptographic Modules, National Institute of Standards and Technology (NIST), up to change notice December 3, 2002 [4] FIPS PUB 180-2 FIPS PUB 180-2 Secure Hash Standard with Change Notice 1 dated February 25,2004, National Institute of Standards and Technology, U.S.A., 2004 [5] FIPS PUB 186-4 FIPS PUB 186-4, Digital Signature Standard (DSS), National Institute of Standards and Technology (NIST), July 2013 [6] FIPS PUB 197 FIPS PUB 197, Advanced Encryption Standard (AES), National Institute of Standards and Technology, U.S. Department of Commerce, November 2001 [7] ISO/IEC 9796-2 ISO/IEC 9796, Information technology - Security techniques - Digital signature scheme giving message recovery - Part 2: Integer factorization based mechanisms, ISO, 2002 [8] NIST SP 800-38A NIST SP 800-38A Recommendation for Block Cipher Modes of Operation, 2001, with Addendum Recommendation for Block Cipher Modes of Operation: Three Variants of Ciphertext Stealing for CBC Mode, October 2010 ST31G480 E01 platform Security Target for composition References SMD_ST31G480_ST_18_002 137/144 [9] ISO/IEC 14888 ISO/IEC 14888, Information technology - Security techniques - Digital signatures with appendix - Part 1: General (1998), Part 2: Identity-based mechanisms (1999), Part 3: Certificate based mechanisms (2006), ISO [10] AUG Smartcard Integrated Circuit Platform Augmentations, Atmel, Hitachi Europe, Infineon Technologies, Philips Semiconductors, Version 1.0, March 2002. [11] MIT/LCS/TR-212 On digital signatures and public key cryptosystems, Rivest, Shamir & Adleman Technical report MIT/LCS/TR-212, MIT Laboratory for computer sciences, January 1979 [12] IEEE 1363-2000 IEEE 1363-2000, Standard Specifications for Public Key Cryptography, IEEE, 2000 [13] IEEE 1363a-2004 IEEE 1363a-2004, Standard Specifications for Public Key Cryptography - Amendment 1:Additional techniques, IEEE, 2004 [14] PKCS #1 V2.1 PKCS #1 V2.1 RSA Cryptography Standard, RSA Laboratories, June 2002 [15] MOV 97 Alfred J. Menezes, Paul C. van Oorschot and Scott A. Vanstone, Handbook of Applied Cryptography, CRC Press, 1997 [16] NIST SP 800-38B NIST special publication 800-38B, Recommandation for Block Cipher Modes of Operation: The CMAC Mode for Authentication, National Institute of Standards and Technology (NIST), May 2005 [17] NIST SP 800-38C NIST special publication 800-38C, Recommendation for Block Cipher Modes of Operation: The CCM Mode for Authentication and Confidentiality, National Institute of Standards and Technology (NIST), May 2004 [18] NIST SP 800-38D NIST special publication 800-38D, Recommendation for Block Cipher Modes of Operation: Galois/Counter mode (GCM) and GMAC, National Institute of Standards and Technology (NIST), November 2007 [19] NIST SP 800-90 NIST Special Publication 800-90, Recommendation for random number generation using deterministic random bit generators (Revised), National Institute of Standards and Technology (NIST), March 2007 [20] FIPS PUB 198-1 FIPS PUB 198-1, The Keyed-Hash Message Authentication Code (HMAC), National Institute of Standards and Technology (NIST), July 2008 [21] NIST SP 800-56A NIST SP 800-90A Revision 2, Recommendation for Pair-Wise Key Establishment Schemes Using Discrete Logarithm Cryptography, National Institute of Standards and Technology (NIST), May 2013 [22] ANSI X9.31 ANSI X9.31, Digital Signature Using Reversible Public Key Cryptography for the Financial Services Industry (rDSA), American National Standard for Financial Services, 1998 Table 19. Other standards Ref Identifier Description References ST31G480 E01 platform Security Target for composition 138/144 SMD_ST31G480_ST_18_002 [23] ANSI X9.42 ANSI X9.42, Public Key Cryptography for the Financial Services Industry: Agreement of Symmetric Keys Using Discrete Logarithm Cryptography, American National Standard for Financial Services, 2003 (R2013) [24] ANSI X9.62 ANSI X9.62, Public Key Cryptography for the Financial Services Industry, The Elliptic Curve Digital Signature Algorithm (ECDSA), American National Standard for Financial Services, 2005 [25] FIPS PUB 202 FIPS PUB 202, SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions, August 2015 [26] EdDSA rfc S. Josefsson and I. Liusvaara,, Edwards-curve Digital Signature Algorithm (EdDSA) draft-irtf-cfrg-eddsa-08, Network Working Group Internet-Draft, IETF, August 19, 2016, available from https://tools.ietf.org/html/draft-irtf-cfrg-eddsa-08 [27] EDDSA Bernstein, D., Duif, N., Lange, T., Schwabe, P., and B. Yang, "High-speed high-security signatures", http://ed25519.cr.yp.to/ed25519-20110926.pdf September 2011 [28] EDDSA2 Bernstein, D., Josefsson, S., Lange, T., Schwabe, P., and B. Yang, "EdDSA for more curves", WWW http://ed25519.cr.yp.to/eddsa- 20150704.pdf July 2015 [29] NOTE 12.1 Note d’application: Modélisation formelle des politiques de sécurité d’une cible d’évaluation NOTE/12.1, N°587/SGDN/DCSSI/SDR DCSSI, 25-03-2008 [30] ANSSI-CC-NOTE- 06/2.0 EN Security requirements for post-delivery code loading, ANSSI, January 2015 [31] ANSSI-CC- CER/F/06.002 PP0084: Interpretations, ANSSI, April 2016 Table 19. Other standards Ref Identifier Description ST31G480 E01 platform Security Target for composition Glossary SMD_ST31G480_ST_18_002 139/144 Appendix A Glossary A.1 Terms Authorised user A user who may, in accordance with the TSP, perform an operation. Composite product Security IC product which includes the Security Integrated Circuit (i.e. the TOE) and the Embedded Software and is evaluated as composite target of evaluation. End-consumer User of the Composite Product in Phase 7. Integrated Circuit (IC) Electronic component(s) designed to perform processing and/or memory functions. IC Dedicated Software IC proprietary software embedded in a Security IC (also known as IC firmware) and developed by ST. Such software is required for testing purpose (IC Dedicated Test Software) but may provide additional services to facilitate usage of the hardware and/or to provide additional services (IC Dedicated Support Software). IC Dedicated Test Software That part of the IC Dedicated Software which is used to test the TOE before TOE Delivery but which does not provide any functionality thereafter. IC developer Institution (or its agent) responsible for the IC development. IC manufacturer Institution (or its agent) responsible for the IC manufacturing, testing, and pre- personalization. IC packaging manufacturer Institution (or its agent) responsible for the IC packaging and testing. Initialisation data Initialisation Data defined by the TOE Manufacturer to identify the TOE and to keep track of the Security IC’s production and further life-cycle phases are considered as belonging to the TSF data. These data are for instance used for traceability and for TOE identification (identification data) Object An entity within the TSC that contains or receives information and upon which subjects perform operations. Packaged IC Security IC embedded in a physical package such as micromodules, DIPs, SOICs or TQFPs. Pre-personalization data Any data supplied by the Card Manufacturer that is injected into the non-volatile memory by the Integrated Circuits manufacturer (Phase 3). These data are for instance used for traceability and/or to secure shipment between phases. Glossary ST31G480 E01 platform Security Target for composition 140/144 SMD_ST31G480_ST_18_002 Secret Information that must be known only to authorised users and/or the TSF in order to enforce a specific SFP. Security IC Composition of the TOE, the Security IC Embedded Software, User Data, and the package. Security IC Embedded SoftWare (ES) Software embedded in the Security IC and not developed by the IC designer. The Security IC Embedded Software is designed in Phase 1 and embedded into the Security IC in Phase 3. Security IC embedded software (ES) developer Institution (or its agent) responsible for the security IC embedded software development and the specification of IC pre-personalization requirements, if any. Security attribute Information associated with subjects, users and/or objects that is used for the enforcement of the TSP. Sensitive information Any information identified as a security relevant element of the TOE such as: – the application data of the TOE (such as IC pre-personalization requirements, IC and system specific data), – the security IC embedded software, – the IC dedicated software, – the IC specification, design, development tools and technology. Smartcard A card according to ISO 7816 requirements which has a non volatile memory and a processing unit embedded within it. Subject An entity within the TSC that causes operations to be performed. Test features All features and functions (implemented by the IC Dedicated Software and/or hardware) which are designed to be used before TOE Delivery only and delivered as part of the TOE. TOE Delivery The period when the TOE is delivered which is after Phase 3 or Phase 4 in this Security target. TSF data Data created by and for the TOE, that might affect the operation of the TOE. User Any entity (human user or external IT entity) outside the TOE that interacts with the TOE. User data All data managed by the Smartcard Embedded Software in the application context. User data comprise all data in the final Smartcard IC except the TSF data. ST31G480 E01 platform Security Target for composition Glossary SMD_ST31G480_ST_18_002 141/144 A.2 Abbreviations Table 20. List of abbreviations Term Meaning AIS Application notes and Interpretation of the Scheme (BSI). BE Back End manufacturing. BSI Bundesamt für Sicherheit in der Informationstechnik. CBC Cipher Block Chaining. CC Common Criteria Version 3.1. R5. CPU Central Processing Unit. CRC Cyclic Redundancy Check. DCSSI Direction Centrale de la Sécurité des Systèmes d’Information. DES Data Encryption Standard. DESFire MIFARE® DESFire® EV1. DEV Development. DIP Dual-In-Line Package. DRBG Deterministic Random Bit Generator. EAL Evaluation Assurance Level. ECB Electronic Code Book. EDES Enhanced DES. EEPROM Electrically Erasable Programmable Read Only Memory. ES Security IC Embedded Software. EWS Electrical Wafer Sort. FE Front End manufacturing. FIPS Federal Information Processing Standard. I/O Input / Output. IC Integrated Circuit. ISO International Standards Organisation. IT Information Technology. LPU Library Protection Unit. MASK Mask manufacturing. MPU Memory Protection Unit. MFPlus MIFARE Plus® X. NESCRYPT Next Step Cryptography Accelerator. NIST National Institute of Standards and Technology. Glossary ST31G480 E01 platform Security Target for composition 142/144 SMD_ST31G480_ST_18_002 NVM Non Volatile Memory. OSP Organisational Security Policy. OST Operating System for Test. PP Protection Profile. PUB Publication Series. RAM Random Access Memory. RF Radio Frequency. RF UART Radio Frequency Universal Asynchronous Receiver Transmitter. ROM Read Only Memory. RSA Rivest, Shamir & Adleman. SAR Security Assurance Requirement. SFP Security Function Policy. SFR Security Functional Requirement. SOIC Small Outline IC. ST Context dependent : STMicroelectronics or Security Target. TDES Triple Data Encryption Standard TOE Target of Evaluation. TQFP Thin Quad Flat Package. TRNG True Random Number Generator. TSC TSF Scope of Control. TSF TOE Security Functionality. TSFI TSF Interface. TSP TOE Security Policy. TSS TOE Summary Specification. WHS Warehouse. Table 20. List of abbreviations (continued) Term Meaning ST31G480 E01 platform Security Target for composition Revision history SMD_ST31G480_ST_18_002 143/144 9 Revision history Table 21. Document revision history Date Revision Changes 13-Dec-2018 E01.2 Creation ST31G480 E01 platform Security Target for composition 144/144 SMD_ST31G480_ST_18_002 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER'S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR "AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL" INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2018 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com