Samsung Electronics Co., Ltd.
Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target
Version 0.3
2016/10/03
Prepared for:
Samsung Electronics Co., Ltd.
416 Maetan-3dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, 443-742 Korea
Prepared By:
www.gossamersec.com
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 2 of 65
1. SECURITY TARGET INTRODUCTION........................................................................................................4
1.1 SECURITY TARGET REFERENCE......................................................................................................................5
1.2 TOE REFERENCE............................................................................................................................................5
1.3 TOE OVERVIEW .............................................................................................................................................5
1.4 TOE DESCRIPTION .........................................................................................................................................5
1.4.1 TOE Architecture...................................................................................................................................6
1.4.2 TOE Documentation ..............................................................................................................................9
2. CONFORMANCE CLAIMS............................................................................................................................10
2.1 CONFORMANCE RATIONALE.........................................................................................................................10
3. SECURITY OBJECTIVES ..............................................................................................................................11
3.1 SECURITY OBJECTIVES FOR THE OPERATIONAL ENVIRONMENT ...................................................................11
4. EXTENDED COMPONENTS DEFINITION ................................................................................................12
5. SECURITY REQUIREMENTS.......................................................................................................................14
5.1 TOE SECURITY FUNCTIONAL REQUIREMENTS .............................................................................................14
5.1.1 Security audit (FAU)............................................................................................................................15
5.1.2 Cryptographic support (FCS)..............................................................................................................16
5.1.3 User data protection (FDP).................................................................................................................22
5.1.4 Identification and authentication (FIA) ...............................................................................................23
5.1.5 Security management (FMT) ...............................................................................................................26
5.1.6 Protection of the TSF (FPT) ................................................................................................................34
5.1.7 TOE access (FTA)................................................................................................................................37
5.1.8 Trusted path/channels (FTP) ...............................................................................................................37
5.2 TOE SECURITY ASSURANCE REQUIREMENTS...............................................................................................37
5.2.1 Development (ADV).............................................................................................................................38
5.2.2 Guidance documents (AGD)................................................................................................................38
5.2.3 Life-cycle support (ALC) .....................................................................................................................39
5.2.4 Tests (ATE) ..........................................................................................................................................40
5.2.5 Vulnerability assessment (AVA)...........................................................................................................40
6. TOE SUMMARY SPECIFICATION..............................................................................................................42
6.1 CRYPTOGRAPHIC SUPPORT ...........................................................................................................................42
6.2 USER DATA PROTECTION ..............................................................................................................................47
6.3 IDENTIFICATION AND AUTHENTICATION.......................................................................................................56
6.4 SECURITY MANAGEMENT .............................................................................................................................58
6.5 PROTECTION OF THE TSF .............................................................................................................................58
6.6 TOE ACCESS.................................................................................................................................................61
6.7 TRUSTED PATH/CHANNELS ...........................................................................................................................62
6.8 KNOX WORKSPACE CONTAINER FUNCTIONALITY ......................................................................................62
6.9 SECURITY AUDIT..........................................................................................................................................63
7. TSF INVENTORY ............................................................................................................................................65
LIST OF TABLES
Table 1 TOE Security Functional Components ......................................................................................................15
Table 2 Security Management Functions ................................................................................................................27
Table 3 EAL 1 augmented with ALC_TSU_EXT.1 Assurance Components.......................................................38
Table 4 BoringSSL Cryptographic Algorithms ......................................................................................................44
Table 5 Samsung Kernel Cryptographic Algorithms.............................................................................................44
Table 6 SCrypto TEE Cryptographic Algorithms..................................................................................................44
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 3 of 65
Table 7 Chipset Hardware Cryptographic Algorithms..........................................................................................45
Table 8 Permissions...................................................................................................................................................55
Table 9 Power-up Cryptographic Algorithm Self-Tests ........................................................................................60
Table 10 Audited Events ...........................................................................................................................................64
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 4 of 65
1. Security Target Introduction
This section identifies the Security Target (ST) and Target of Evaluation (TOE) identification, ST conventions, ST
conformance claims, and the ST organization. The TOE consists of the Samsung Galaxy Note 7 on Android 6
provided by Samsung Electronics Co., Ltd.. The TOE is being evaluated as a Mobile Device.
The Security Target contains the following additional sections:
 Conformance Claims (Section 2)
 Security Objectives (Section 3)
 Extended Components Definition (Section 4)
 Security Requirements (Section 5)
 TOE Summary Specification (Section 6)
Acronyms and Terminology
AA Assurance Activity
CC Common Criteria
CCEVS Common Criteria Evaluation and Validation Scheme
EAR Entropy Analysis Report
GUI Graphical User Interface
NFC Near Field Communication
PCL Product Compliant List
PP Protection Profile
SAR Security Assurance Requirement
SE Secure Element
SFR Security Functional Requirement
SOF Strength of Function
ST Security Target
TEE Trusted Execution Environment (TrustZone)
TOE Target of Evaluation
U.S. United States
VR Validation Report
Conventions
The following conventions have been applied in this document:
 Security Functional Requirements – Part 2 of the CC defines the approved set of operations that may be
applied to functional requirements: iteration, assignment, selection, and refinement.
o Iteration: allows a component to be used more than once with varying operations. In the ST,
iteration is indicated by a letter placed at the end of the component. For example FDP_ACC.1(1)
and FDP_ACC.1(2) indicate that the ST includes two iterations of the FDP_ACC.1 requirement,
(1) and (2).
o Assignment: allows the specification of an identified parameter. Assignments are indicated using
bold and are surrounded by brackets (e.g., [assignment]). Note that an assignment within a
selection would be identified in italics and with embedded bold brackets (e.g., [[selected-
assignment]]).
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 5 of 65
o Selection: allows the specification of one or more elements from a list. Selections are indicated
using bold italics and are surrounded by brackets (e.g., [selection]).
o Refinement: allows the addition of details. Refinements are indicated using bold, for additions,
and strike-through, for deletions (e.g., “… all objects …” or “… some big things …”).
 The MDFPP uses an additional convention – the ‘case’ – which defines parts of an SFR that apply only
when corresponding selections are made or some other identified conditions exist. Only the applicable
cases are identified in this ST and they are identified using bold text.
 Other sections of the ST – Other sections of the ST use bolding to highlight text of special interest, such as
captions.
1.1 Security Target Reference
ST Title – Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6 (MDFPP20) Security Target
ST Version – Version 0.3
ST Date – 2016/10/03
1.2 TOE Reference
TOE Identification – Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6.
TOE Developer – Samsung Electronics Co., Ltd.
Evaluation Sponsor – Samsung Electronics Co., Ltd.
1.3 TOE Overview
The Target of Evaluation (TOE) is the Samsung Galaxy Note 7 on Android 6.
1.4 TOE Description
The TOE is a mobile device based on Android 6.0.1 with modifications made to increase the level of security
provided to end users and enterprises. The TOE is intended to be used as part of an enterprise messaging solution
providing mobile staff with enterprise connectivity.
The TOE includes a Common Criteria mode (or “CC mode”) that an administrator can invoke through the use of an
MDM or through a dedicated administrative application (see the Guidance for instructions to obtain the application).
The TOE must meet the following prerequisites in order for an administrator to transition the TOE to CC mode.
 Require a screen lock password (swipe, PIN, pattern, or facial recognition screen locks are not allowed).
 The maximum password failure retry policy should be less than or equal to ten.
 Device encryption must be enabled or a screen lock password required to decrypt data on boot.
 Revocation checking must be enabled.
 External storage must be encrypted.
 Password recovery policy must not be enabled.
 Password history length must not be set.
When CC mode has been enabled, the TOE behaves as follows.
 The TOE sets the system wide Android CC mode property to “Enabled” if all the prerequisites have been
met.
 The TOE performs power-on self-tests.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 6 of 65
 The TOE performs secure boot integrity checking of the kernel and key system executables.
 The TOE prevents loading of custom firmware/kernels and requires all updates occur through FOTA
(Samsung’s Firmware Over The Air firmware update method)
 The TOE uses CAVP approved cryptographic ciphers when joining and communicating with wireless
networks.
 The TOE utilizes CAVP approved cryptographic ciphers for TLS.
 The TOE ensures FOTA updates utilize 2048-bit PKCS #1 RSA-PSS formatted signatures (with SHA-512
hashing).
The TOE includes a containerization capability, KNOX Workspace, which is part of the KNOX platform. This
container provides a way to segment applications and data into two separate areas on the device, such as a personal
area and a work area, each with its own separate apps, data and security policies. For this effort the TOE was
evaluated both without and with a KNOX Workspace container created (and to create a KNOX Workspace
container, one must purchase an additional license). Thus, the evaluation includes several KNOX-specific claims
that apply to a KNOX Workspace container when created.
There are different models of the TOE, the Samsung Galaxy Note 7 on Android 6, and these models differ in their
internal components (as described in the table below).
The model numbers of the mobile device used during evaluation testing are as follows:
Device Name Model
Number
Chipset/CPU Build
Arch/ISA
Android
Version
Kernel
Version
Build Number
Galaxy Note 7 SM-N930F Exynos 8890 A64 6.0.1 3.18.14 MMB29K
Galaxy Note 7 SM-N930V Qualcomm MSM8996 A64 6.0.1 3.18.20 MMB29M
The devices include a final letter or number at the end of the name that denotes that the device is for a specific
carrier (for example, V = Verizon Wireless and A = AT&T, which were used during the evaluation). The following
list of letters/numbers denotes the specific models which may be validated:
V – Verizon Wireless,
P - Sprint,
R4 – US Cellular,
S – SK Telecom,
L – LG Uplus,
K - KT, Korea Telecom
A – AT&T,
T – T-Mobile,
C/F/I - International
For each device there are specific models which are validated. This table lists the specific carrier models which have
the validated configuration.
Device Name Base Model Number Carrier Models
Galaxy Note 7 (Qualcomm) SM-N930 T, P, R4, V, A
Galaxy Note 7 (System LSI) SM-N930 F, S, K, L
Where “None” is listed that means a device without a carrier model designation suffix can also be placed into the
validated configuration.
1.4.1 TOE Architecture
The TOE combines with a Mobile Device Management solution that enables the enterprise to watch, control and
administer all deployed mobile devices, across multiple mobile service providers as well as facilitate secure
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 7 of 65
communications through a VPN. This partnership provides a secure mobile environment that can be managed and
controlled by the environment and reduce the risks that can be introduced through a Bring-Your-Own-Device
(BYOD) model.
Data on the TOE is protected through the implementation of Samsung On-Device Encryption (ODE) which utilizes
a CAVP certified cryptographic algorithms to encrypt device storage. This functionality is combined with a number
of on-device policies including local wipe, remote wipe, password complexity, automatic lock and privileged access
to security configurations to prevent unauthorized access to the device and stored data.
The Samsung Enterprise Software Development Kit (SDK) builds on top of the existing Android security model by
expanding the current set of security configuration of options to more than 600 configurable policies and including
additional security functionality such as application whitelisting and blacklisting.
KNOX provides the ability to enhance the BYOD model by creating a separate container for the Enterprise. Within
this container, the Enterprise can provision separate applications and ensure they are kept separate from anything the
user may do outside the KNOX Workspace container. The Enterprise can use policy controls to manage the device
as a whole or the KNOX Workspace container specifically, as needed by the organization.
1.4.1.1 Physical Boundaries
The TOE is a multi-user mobile device based on Android (6.0.1) that incorporates the Samsung Enterprise SDK.
The TOE does not include the user applications that run on top of the operating system, but does include controls
that limit application behavior. When the TOE is used within an enterprise environment, the enterprise can manage
the configuration of the mobile device through a compliant device management solution.
The TOE communicates and interacts with 802.11-2012 Access Points and mobile data networks to establish
network connectivity, and the through that connectivity interacts with MDM servers that allow administrative
control of the TOE.
1.4.1.2 Logical Boundaries
This section summarizes the security functions provided by the Samsung Galaxy Note 7 on Android 6:
 Security Audit
 Cryptographic support
 User data protection
 Identification and authentication
 Security management
 Protection of the TSF
 TOE access
 Trusted path/channels
1.4.1.2.1 Security Audit
The TOE is designed to be able to generate logs for a range of security relevant events. The TOE stores the logs
locally so they can be accessed by an administrator or they can be exported to an MDM.
1.4.1.2.2 Cryptographic support
The TOE includes a cryptographic library with CAVP certified algorithms for a wide range of cryptographic
functions including: asymmetric key generation and establishment, symmetric key generation,
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 8 of 65
encryption/decryption, cryptographic hashing and keyed-hash message authentication. These functions are
supported with suitable random bit generation, key derivation, salt generation, initialization vector generation,
secure key storage, and key and protected data destruction. These primitive cryptographic functions are used to
implement security protocols such as TLS, IPsec, and HTTPS and also to encrypt the media (including the
generation and protection of data and key encryption keys) used by the TOE. Many of these cryptographic functions
are also accessible as services to applications running on the TOE.
1.4.1.2.3 User data protection
The TOE is designed to control access to system services by hosted applications, including protection of the Trust
Anchor Database. Additionally, the TOE is designed to protect user and other sensitive data using encryption so that
even if a device is physically lost, the data remains protected. The functionality provided by a KNOX Workspace
container enhances the security of user data by providing an additional layer of separation between apps and data
while the device is in use.
1.4.1.2.4 Identification and authentication
The TOE supports a number of features related to identification and authentication. From a user perspective, except
for making phone calls to an emergency number, a password (i.e., Password Authentication Factor) must be
correctly entered to unlock the TOE. Also, even when the TOE is unlocked the password must be re-entered to
change the password. Passwords are obscured when entered so they cannot be read from the TOE's display and the
frequency of entering passwords is limited and when a configured number of failures occurs, the TOE will be wiped
to protect its contents. Passwords can be constructed using upper and lower cases characters, numbers, and special
characters and passwords between 4 and 16 characters are supported.
The TOE can also serve as an 802.1X supplicant and can use X509v3 and validate certificates for EAP-TLS, TLS
and IPsec exchanges.
1.4.1.2.5 Security management
The TOE provides all the interfaces necessary to manage the security functions identified throughout this Security
Target as well as other functions commonly found in mobile devices. Many of the available functions are available
to users of the TOE while many are restricted to administrators operating through a Mobile Device Management
solution once the TOE has been enrolled. Once the TOE has been enrolled and then un-enrolled, it removes all
MDM policies and disables CC mode.
1.4.1.2.6 Protection of the TSF
The TOE implements a number of features designed to protect itself to ensure the reliability and integrity of its
security features. It protects particularly sensitive data such as cryptographic keys so that they are not accessible or
exportable. It also provides its own timing mechanism to ensure that reliable time information is available (e.g., for
log accountability). It enforces read, write, and execute memory page protections, uses address space layout
randomization, and stack-based buffer overflow protections to minimize the potential to exploit application flaws. It
is also designed to protect itself from modification by applications as well as to isolate the address spaces of
applications from one another to protect those applications.
The TOE includes functions to perform self-tests and software/firmware integrity checking so that it might detect
when it is failing or may be corrupt. If any of the self-tests fail, the TOE will not go into an operational mode. It also
includes mechanisms (i.e., verification of the digital signature of each new image) so that the TOE itself can be
updated while ensuring that the updates will not introduce malicious or other unexpected changes in the TOE.
Digital signature checking also extends to verifying applications prior to their installation.
1.4.1.2.7 TOE access
The TOE can be locked, obscuring its display, by the user or after a configured interval of inactivity. The TOE also
has the capability to display an advisory message (banner) when users unlock the TOE for use.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 9 of 65
The TOE is also able to attempt to connect to wireless networks as configured.
1.4.1.2.8 Trusted path/channels
The TOE supports the use of 802.11-2012, 802.1X, EAP-TLS, TLS and IPsec to secure communications channels
between itself and other trusted network devices.
1.4.2 TOE Documentation
 Samsung Android 6 on Galaxy Devices Guidance Documentation, version 2.5, October 4, 2016
 Samsung Android 6 on Galaxy Devices User Guidance Documentation, version 2.5, October 4, 2016
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 10 of 65
2. Conformance Claims
This TOE is conformant to the following CC specifications:
 Common Criteria for Information Technology Security Evaluation Part 2: Security functional components,
Version 3.1, Revision 4, September 2012.
 Part 2 Extended
 Common Criteria for Information Technology Security Evaluation Part 3: Security assurance components,
Version 3.1 Revision 4, September 2012.
 Part 3 Extended
 Protection Profile For Mobile Device Fundamentals, Version 2, 17 September 2014 (MDFPP20)
 Package Claims:
 Assurance Level: EAL 1 augmented with ALC_TSU_EXT.1
2.1 Conformance Rationale
The ST conforms to the MDFPP20. As explained previously, the security problem definition, security objectives,
and security requirements are defined the PP.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 11 of 65
3. Security Objectives
The Security Problem Definition may be found in the MDFPP20 and this section reproduces only the corresponding
Security Objectives for operational environment for reader convenience. The MDFPP20 offers additional
information about the identified security objectives, but that has not been reproduced here and the MDFPP20 should
be consulted if there is interest in that material.
In general, the MDFPP20 has defined Security Objectives appropriate for Mobile Device and as such are applicable
to the Samsung Galaxy Note 7 on Android 6 TOE.
3.1 Security Objectives for the Operational Environment
 OE.CONFIG TOE administrators will configure the Mobile Device security functions correctly to create
the intended security policy.
 OE.NOTIFY The Mobile User will immediately notify the administrator if the Mobile Device is lost or
stolen.
 OE.PRECAUTION The Mobile User exercises precautions to reduce the risk of loss or theft of the Mobile
Device.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 12 of 65
4. Extended Components Definition
All of the extended requirements in this ST have been drawn from the MDFPP20. The MDFPP20 defines the
following extended SFRs and SARs and since they are not redefined in this ST the MDFPP20 should be consulted
for more information in regard to those CC extensions.
Extended SFRs:
 FCS_CKM_EXT.1: Extended: Cryptographic Key Support
 FCS_CKM_EXT.2: Extended: Cryptographic Key Random Generation
 FCS_CKM_EXT.3: Extended: Cryptographic Key Generation
 FCS_CKM_EXT.4: Extended: Key Destruction
 FCS_CKM_EXT.5: Extended: TSF Wipe
 FCS_CKM_EXT.6: Extended: Salt Generation
 FCS_HTTPS_EXT.1: Extended: HTTPS Protocol
 FCS_IV_EXT.1: Extended: Initialization Vector Generation
 FCS_RBG_EXT.1: Extended: Cryptographic Operation (Random Bit Generation)
 FCS_SRV_EXT.1: Extended: Cryptographic Algorithm Services
 FCS_STG_EXT.1: Extended: Cryptographic Key Storage
 FCS_STG_EXT.2: Extended: Encrypted Cryptographic Key Storage
 FCS_STG_EXT.3: Extended: Integrity of encrypted key storage
 FCS_TLSC_EXT.1: Extended: EAP TLS Protocol
 FCS_TLSC_EXT.2: Extended: TLS Protocol
 FDP_ACF_EXT.1: Extended: Security access control
 FDP_DAR_EXT.1: Extended: Protected Data Encryption
 FDP_DAR_EXT.2: Extended: Sensitive Data Encryption
 FDP_IFC_EXT.1: Extended: Subset information flow control
 FDP_STG_EXT.1: Extended: User Data Storage
 FDP_UPC_EXT.1: Extended: Inter-TSF user data transfer protection
 FIA_AFL_EXT.1: Authentication failure handling
 FIA_BLT_EXT.1: Extended: Bluetooth User Authorization
 FIA_BLT_EXT.2: Extended: Bluetooth Authentication
 FIA_PAE_EXT.1: Extended: PAE Authentication
 FIA_PMG_EXT.1: Extended: Password Management
 FIA_TRT_EXT.1: Extended: Authentication Throttling
 FIA_UAU_EXT.1: Extended: Authentication for Cryptographic Operation
 FIA_UAU_EXT.2: Extended: Timing of Authentication
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 13 of 65
 FIA_UAU_EXT.3: Extended: Re-Authentication
 FIA_X509_EXT.1: Extended: Validation of certificates
 FIA_X509_EXT.2: Extended: X509 certificate authentication
 FIA_X509_EXT.3: Extended: Request Validation of certificates
 FMT_MOF_EXT.1: Extended: Management of security functions behavior
 FMT_SMF_EXT.1: Extended: Specification of Management Functions
 FMT_SMF_EXT.2: Extended: Specification of Remediation Actions
 FPT_AEX_EXT.1: Extended: Anti-Exploitation Services (ASLR)
 FPT_AEX_EXT.2: Extended: Anti-Exploitation Services (Memory Page Permissions)
 FPT_AEX_EXT.3: Extended: Anti-Exploitation Services (Overflow Protection)
 FPT_AEX_EXT.4: Extended: Domain Isolation
 FPT_BBD_EXT.1: Application Processor Mediation
 FPT_KST_EXT.1: Extended: Key Storage
 FPT_KST_EXT.2: Extended: No Key Transmission
 FPT_KST_EXT.3: Extended: No Plaintext Key Export
 FPT_NOT_EXT.1: Extended: Self-Test Notification
 FPT_TST_EXT.1: Extended: TSF Cryptographic Functionality Testing
 FPT_TST_EXT.2: Extended: TSF Integrity Testing
 FPT_TUD_EXT.1: Extended: Trusted Update: TSF version query
 FPT_TUD_EXT.2: Extended: Trusted Update Verification
 FTA_SSL_EXT.1: Extended: TSF- and User-initiated locked state
 FTA_WSE_EXT.1: Extended: Wireless Network Access
 FTP_ITC_EXT.1: Extended: Trusted channel Communication
Extended SARs:
 ALC_TSU_EXT.1: Timely Security Updates
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 14 of 65
5. Security Requirements
This section defines the Security Functional Requirements (SFRs) and Security Assurance Requirements (SARs)
that serve to represent the security functional claims for the Target of Evaluation (TOE) and to scope the evaluation
effort.
The SFRs have all been drawn from the MDFPP20. The refinements and operations already performed in the
MDFPP20 are not identified (e.g., highlighted) here, rather the requirements have been copied from the MDFPP20
and any residual operations have been completed herein. Of particular note, the MDFPP20 made a number of
refinements and completed some of the SFR operations defined in the Common Criteria (CC) and that PP should be
consulted to identify those changes if necessary.
The SARs are also drawn from the MDFPP20 which includes all the SARs for EAL 1 augmented with
ALC_TSU_EXT.1. However, the SARs are effectively refined since requirement-specific 'Assurance Activities' are
defined in the MDFPP20 that serve to ensure corresponding evaluations will yield more practical and consistent
assurance than the assurance requirements alone. The MDFPP20 should be consulted for the assurance activity
definitions.
5.1 TOE Security Functional Requirements
The following table identifies the SFRs that are satisfied by the Samsung Galaxy Note 7 on Android 6 TOE.
Requirement Class Requirement Component
FAU: Security FAU_GEN.1: Audit Data Generation
audit FAU_SAR.1: Audit Review
FAU_STG.1: Audit Storage Protection
FAU_STG.4: Prevention of Audit Data Loss
FCS: Cryptographic FCS_CKM.1(1): Cryptographic key generation
support FCS_CKM.1(2): Cryptographic key generation
FCS_CKM.2(1): Cryptographic key establishment
FCS_CKM.2(2): Cryptographic key distribution
FCS_CKM_EXT.1: Extended: Cryptographic Key Support
FCS_CKM_EXT.2: Extended: Cryptographic Key Random Generation
FCS_CKM_EXT.3: Extended: Cryptographic Key Generation
FCS_CKM_EXT.4: Extended: Key Destruction
FCS_CKM_EXT.5: Extended: TSF Wipe
FCS_CKM_EXT.6: Extended: Salt Generation
FCS_COP.1(1): Cryptographic operation
FCS_COP.1(2): Cryptographic operation
FCS_COP.1(3): Cryptographic operation
FCS_COP.1(4): Cryptographic operation
FCS_COP.1(5): Cryptographic operation
FCS_HTTPS_EXT.1: Extended: HTTPS Protocol
FCS_IV_EXT.1: Extended: Initialization Vector Generation
FCS_RBG_EXT.1: Extended: Cryptographic Operation (Random Bit Generation)
FCS_SRV_EXT.1: Extended: Cryptographic Algorithm Services
FCS_STG_EXT.1: Extended: Cryptographic Key Storage
FCS_STG_EXT.2: Extended: Encrypted Cryptographic Key Storage
FCS_STG_EXT.3: Extended: Integrity of encrypted key storage
FCS_TLSC_EXT.1: Extended: EAP TLS Protocol
FCS_TLSC_EXT.2: Extended: TLS Protocol
FDP: User data FDP_ACF_EXT.1(*): Extended: Security access control
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 15 of 65
protection FDP_DAR_EXT.1: Extended: Protected Data Encryption
FDP_DAR_EXT.2: Extended: Sensitive Data Encryption
FDP_IFC_EXT.1: Extended: Subset information flow control
FDP_STG_EXT.1: Extended: User Data Storage
FDP_UPC_EXT.1: Extended: Inter-TSF user data transfer protection
FIA: Identification FIA_AFL_EXT.1(*): Authentication failure handling
and authentication FIA_BLT_EXT.1: Extended: Bluetooth User Authorization
FIA_BLT_EXT.2: Extended: Bluetooth Authentication
FIA_PAE_EXT.1: Extended: PAE Authentication
FIA_PMG_EXT.1: Extended: Password Management
FIA_TRT_EXT.1: Extended: Authentication Throttling
FIA_UAU.7: Protected authentication feedback
FIA_UAU_EXT.1: Extended: Authentication for Cryptographic Operation
FIA_UAU_EXT.2: Extended: Timing of Authentication
FIA_UAU_EXT.3: Extended: Re-Authentication
FIA_X509_EXT.1: Extended: Validation of certificates
FIA_X509_EXT.2: Extended: X509 certificate authentication
FIA_X509_EXT.3: Extended: Request Validation of certificates
FMT: Security FMT_MOF_EXT.1: Extended: Management of security functions behavior
management FMT_SMF_EXT.1: Extended: Specification of Management Functions
FMT_SMF_EXT.2(*): Extended: Specification of Remediation Actions
FPT: Protection of FPT_AEX_EXT.1: Extended: Anti-Exploitation Services (ASLR)
the TSF FPT_AEX_EXT.2: Extended: Anti-Exploitation Services (Memory Page
Permissions)
FPT_AEX_EXT.3: Extended: Anti-Exploitation Services (Overflow Protection)
FPT_AEX_EXT.4: Extended: Domain Isolation
FPT_BBD_EXT.1: Application Processor Mediation
FPT_KST_EXT.1: Extended: Key Storage
FPT_KST_EXT.2: Extended: No Key Transmission
FPT_KST_EXT.3: Extended: No Plaintext Key Export
FPT_NOT_EXT.1: Extended: Self-Test Notification
FPT_STM.1: Reliable time stamps
FPT_TST_EXT.1: Extended: TSF Cryptographic Functionality Testing
FPT_TST_EXT.2: Extended: TSF Integrity Testing
FPT_TUD_EXT.1: Extended: Trusted Update: TSF version query
FPT_TUD_EXT.2: Extended: Trusted Update Verification
FTA: TOE access FTA_SSL_EXT.1: Extended: TSF- and User-initiated locked state
FTA_TAB.1: Default TOE Access Banners
FTA_WSE_EXT.1: Extended: Wireless Network Access
FTP: Trusted
path/channels
FTP_ITC_EXT.1: Extended: Trusted channel Communication
Table 1 TOE Security Functional Components
5.1.1 Security audit (FAU)
5.1.1.1 Audit Data Generation (FAU_GEN.1)
FAU_GEN.1.1
The TSF shall be able to generate an audit record of the following auditable events:
1. Start-up and shutdown of the audit functions;
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 16 of 65
2. All administrative actions;
3. Start-up and shutdown of the OS and kernel;
4. Insertion or removal of removable media;
5. Establishment of a synchronizing connection;
6. Specifically defined auditable events in Table 10 of the MDFPP20;
7. [Audit records reaching [95] percentage of audit capacity,]].
FAU_GEN.1.2
The TSF shall record within each audit record at least the following information:
1. Date and time of the event;
2. type of event;
3. subject identity;
4. the outcome (success or failure) of the event; and
5. additional information in Table 10 Audited Events of the TSS.
5.1.1.2 Audit Review (FAU_SAR.1)
FAU_SAR.1.1
The TSF shall provide [the administrator] with the capability to read [all audited events and record
contents] from the audit records.
FAU_SAR.1.2
The TSF shall provide the audit records in a manner suitable for the user to interpret the
information.
5.1.1.3 Audit Storage Protection (FAU_STG.1)
FAU_STG.1.1
The TSF shall protect the stored audit records in the audit trail from unauthorized deletion.
FAU_STG.1.2
The TSF shall be able to prevent unauthorized modifications to the stored audit records in the
audit trail.
5.1.1.4 Prevention of Audit Data Loss (FAU_STG.4)
FAU_STG.4.1
The TSF shall overwrite the oldest stored audit records if the audit trail is full.
5.1.2 Cryptographic support (FCS)
5.1.2.1 Cryptographic key generation (FCS_CKM.1(1))
FCS_CKM.1(1).1
The TSF shall generate asymmetric cryptographic keys in accordance with a specified
cryptographic key generation algorithm [- [RSA schemes] using cryptographic key sizes of [2048-
bit or greater] that meet the following: [Appendix B.3, ANSI X9.31-1998, Section 4.1;],
- [ECC schemes] using ['NIST curves' P-256, P-384 and [P-521]] that meet the following:
[FIPS PUB 186-4, 'Digital Signature Standard (DSS)', Appendix B.4];
- [FFC schemes] using cryptographic key sizes of [2048-bit or greater] that meet the following:
[FIPS PUB 186-4, 'Digital Signature Standard (DSS)', Appendix B.1]].
5.1.2.2 Cryptographic key generation (FCS_CKM.1(2))
FCS_CKM.1(2).1
The TSF shall generate symmetric cryptographic keys in accordance with a specified
cryptographic key generation algorithm [PRF-384] and specified cryptographic key sizes [128
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 17 of 65
bits] using a Random Bit Generator as specified in FCS_RBG_EXT.1 that meet the following:
[IEEE 802.11-2012].
5.1.2.3 Cryptographic key establishment (FCS_CKM.2(1))
FCS_CKM.2(1).1
The TSF shall perform cryptographic key establishment in accordance with a specified
cryptographic key establishment method:
- [RSA-based key establishment schemes] that meets the following: [NIST Special Publication
800-56B, 'Recommendation for Pair-Wise Key Establishment Schemes Using Integer
Factorization Cryptography'];
and [- [Elliptic curve-based key establishment schemes] that meets the following: [NIST Special
Publication 800-56A, 'Recommendation for Pair-Wise Key Establishment Schemes Using
Discrete Logarithm Cryptography'];
- [Finite field-based key establishment schemes] that meets the following: [NIST Special
Publication 800-56A, 'Recommendation for Pair-Wise Key Establishment Schemes Using
Discrete Logarithm Cryptography'];] for the purposes of encrypting sensitive data received while
the device is locked. (TD0048 applied).
5.1.2.4 Cryptographic key distribution (FCS_CKM.2(2))
FCS_CKM.2(2).1
The TSF shall decrypt Group Temporal Key (GTK) in accordance with a specified cryptographic
key distribution method [AES Key Wrap in an EAPOL-Key frame] that meets the following:
[NIST SP 800-38F, IEEE 802.11-2012 for the packet format and timing considerations] and does
not expose the cryptographic keys.
5.1.2.5 Extended: Cryptographic Key Support (FCS_CKM_EXT.1)
FCS_CKM_EXT.1.1
The TSF shall support a [hardware-protected] REK with a [symmetric] key of strength [256 bits].
(TD0038 applied)
FCS_CKM_EXT.1.2
System software on the TSF shall be able only to request [encryption/decryption, NIST SP 800-
108 key derivation] by the key and shall not be able to read, import, or export a REK.
FCS_CKM_EXT.1.3
A REK shall be generated by a RBG in accordance with FCS_RBG_EXT.1.
FCS_CKM_EXT.1.4
A REK shall not be able to be read from or exported from the hardware..
5.1.2.6 Extended: Cryptographic Key Random Generation (FCS_CKM_EXT.2)
FCS_CKM_EXT.2.1
All DEKs shall be randomly generated with entropy corresponding to the security strength of AES
key sizes of [256] bits.
5.1.2.7 Extended: Cryptographic Key Generation (FCS_CKM_EXT.3)
FCS_CKM_EXT.3.1
The TSF shall use[[256-bit] symmetric KEKs] corresponding to at least the security strength of
the keys encrypted by the KEK. (TD0038 applied)
FCS_CKM_EXT.3.2
The TSF shall generate all KEKs using one or more of the following methods:
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 18 of 65
a) derive the KEK from a Password Authentication Factor using PBKDF and
[b) generate the KEK using an RBG that meets this profile (as specified in FCS_RBG_EXT.1),
d) Combine the KEK from other KEKs in a way that preserves the effective entropy of each
factor by [encrypting one key with another] (Per TD0038)].
5.1.2.8 Extended: Key Destruction (FCS_CKM_EXT.4)
FCS_CKM_EXT.4.1
The TSF shall destroy cryptographic keys in accordance with the specified cryptographic key
destruction methods:
- by clearing the KEK encrypting the target key,
- in accordance with the following rules:
 For volatile memory, the destruction shall be executed by a single direct overwrite
[consisting of zeroes]. (TD0028 applied)
 For non-volatile EEPROM, the destruction shall be executed by a single direct overwrite
consisting of a pseudo random pattern using the TSF’s RBG (as specified in
FCS_RBG_EXT.1), followed a read-verify.
 For non-volatile flash memory that is not wear-leveled, the destruction shall be executed
[by a single direct overwrite consisting of zeros followed by a read-verify]. (TD0057
applied)
 For non-volatile flash memory that is wear-leveled, the destruction shall be executed [by
a single direct overwrite consisting of zeros]
 For non-volatile memory other than EEPROM and flash, the destruction shall be
executed by overwriting three or more times with a random pattern that is changed before
each write.
FCS_CKM_EXT.4.2
The TSF shall destroy all plaintext keying material and critical security parameters when no longer
needed.
5.1.2.9 Extended: TSF Wipe (FCS_CKM_EXT.5)
FCS_CKM_EXT.5.1
The TSF shall wipe all protected data by [Cryptographically erasing the encrypted DEKs and/or
the KEKs in non-volatile memory by following the requirements in FCS_CKM_EXT.4.1;]
FCS_CKM_EXT.5.2
The TSF shall perform a power cycle on conclusion of the wipe procedure.
5.1.2.10 Extended: Salt Generation (FCS_CKM_EXT.6)
FCS_CKM_EXT.6.1
The TSF shall generate all salts using a RBG that meets FCS_RBG_EXT.1.
5.1.2.11 Cryptographic operation (FCS_COP.1(1))
FCS_COP.1(1).1
The TSF shall perform [encryption/decryption] in accordance with a specified cryptographic
algorithm
- AES-CBC (as defined in FIPS PUB 197, and NIST SP 800-38A) mode,
- AES-CCMP (as defined in FIPS PUB 197, NIST SP 800-38C and IEEE 802.11-2012), and
[- AES Key Wrap (KW) (as defined in NIST SP 800-38F),
- AES-GCM (as defined in NIST SP 800-38D)
- AES-XTS (as defined in NIST SP 800-38E) mode,]
and cryptographic key sizes 128-bit key sizes and [256-bit key sizes].
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 19 of 65
5.1.2.12 Cryptographic operation (FCS_COP.1(2))
FCS_COP.1(2).1
The TSF shall perform [cryptographic hashing] in accordance with a specified cryptographic
algorithm SHA-1 and [SHA-256, SHA-384, SHA-512] and message digest sizes 160 and [256,
384, 512] that meet the following: [FIPS Pub 180-4].
5.1.2.13 Cryptographic operation (FCS_COP.1(3))
FCS_COP.1(3).1
The TSF shall perform [cryptographic signature services (generation and verification)] in
accordance with a specified cryptographic algorithm
- [RSA schemes] using cryptographic key sizes [of 2048-bit or greater] that meet the following:
[FIPS PUB 186-4, 'Digital Signature Standard (DSS)', Section 4]
and [- [ECDSA schemes] using ['NIST curves' P-256, P-384 and [P-521]] that meet the
following: [FIPS PUB 186-4, 'Digital Signature Standard (DSS)', Section 5];].
5.1.2.14 Cryptographic operation (FCS_COP.1(4))
FCS_COP.1(4).1
The TSF shall perform [keyed-hash message authentication] in accordance with a specified
cryptographic algorithm HMAC-SHA-1 and [HMAC-SHA-256, HMAC-SHA-384, HMAC-SHA-
512] and cryptographic key sizes [160, 256, 384, 512] and message digest sizes 160 and [256, 384,
512] bits that meet the following: [FIPS Pub 198-1, 'The Keyed-Hash Message Authentication
Code', and FIPS Pub 180-4, 'Secure Hash Standard'].
5.1.2.15 Cryptographic operation (FCS_COP.1(5))
FCS_COP.1(5).1
The TSF shall perform [Password-based Key Derivation Functions] in accordance with a specified
cryptographic algorithm [HMAC-[SHA-256, SHA-512]], with [8192 for Keystore, 16384 for
SKMM and 32768 for Secure Storage] iterations, and output cryptographic key sizes [256] that
meet the following: [NIST SP 800-132].
5.1.2.16 Extended: HTTPS Protocol (FCS_HTTPS_EXT.1)
FCS_HTTPS_EXT.1.1
The TSF shall implement the HTTPS protocol that complies with RFC 2818.
FCS_HTTPS_EXT.1.2
The TSF shall implement HTTPS using TLS (FCS_TLSC_EXT.2).
FCS_HTTPS_EXT.1.3
The TSF shall notify the application and [no other action] if the peer certificate is deemed invalid.
5.1.2.17 Extended: Initialization Vector Generation (FCS_IV_EXT.1)
FCS_IV_EXT.1.1
The TSF shall generate IVs in accordance with Table 14: References and IV Requirements for
NIST-approved Cipher Modes.
5.1.2.18 Extended: Cryptographic Operation (Random Bit Generation) (FCS_RBG_EXT.1)
FCS_RBG_EXT.1.1
The TSF shall perform all deterministic random bit generation services in accordance with [NIST
Special Publication 800-90A using [Hash_DRBG (any), HMAC_DRBG (any), CTR_DRBG
(AES)]].
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 20 of 65
FCS_RBG_EXT.1.2
The deterministic RBG shall be seeded by an entropy source that accumulates entropy from [TSF-
hardware-based noise source] with a minimum of [256 bits] of entropy at least equal to the
greatest security strength (according to NIST SP 800-57) of the keys and hashes that it will
generate.
FCS_RBG_EXT.1.3
The TSF shall be capable of providing output of the RBG to applications running on the TSF that
request random bits.
5.1.2.19 Extended: Cryptographic Algorithm Services (FCS_SRV_EXT.1)
FCS_SRV_EXT.1.1
The TSF shall provide a mechanism for applications to request the TSF to perform the following
cryptographic operations:
- All mandatory and [(per TD0059) selected algorithms] in FCS_CKM.2(1)
- The following algorithms in FCS_COP.1(1): AES-CBC, [AES Key Wrap, AES-GCM, AES-
XTS]
- All mandatory and selected algorithms in FCS_COP.1(3)
- All mandatory and selected algorithms in FCS_COP.1(2)
- All mandatory and selected algorithms in FCS_COP.1(4)
[- All mandatory and [(per TD0059) selected algorithms] in FCS_CKM.1(1),
- The selected algorithms in FCS_COP.1(5)].
5.1.2.20 Extended: Cryptographic Key Storage (FCS_STG_EXT.1)
FCS_STG_EXT.1.1
The TSF shall provide [hardware-isolated] secure key storage for asymmetric private keys and
[symmetric keys].
FCS_STG_EXT.1.2
The TSF shall be capable of importing keys/secrets into the secure key storage upon request of
[the user, the administrator] and [applications running on the TSF].
FCS_STG_EXT.1.3
The TSF shall be capable of destroying keys/secrets in the secure key storage upon request of [the
user].
FCS_STG_EXT.1.4
The TSF shall have the capability to allow only the application that imported the key/secret the
use of the key/secret. Exceptions may only be explicitly authorized by [a common application
developer].
FCS_STG_EXT.1.5
The TSF shall allow only the application that imported the key/secret to request that the key/secret
be destroyed. Exceptions may only be explicitly authorized by [a common application developer].
5.1.2.21 Extended: Encrypted Cryptographic Key Storage (FCS_STG_EXT.2)
FCS_STG_EXT.2.1
The TSF shall encrypt all DEKs and KEKs and [no other keys] by KEKs that are [1) Protected by
the REK with [a. encryption by a REK,
b. encryption by a KEK chaining to a REK] ,
2) Protected by the REK and the password with [a. encryption by a REK and the password-
derived KEK,
b. encryption by a KEK chaining to a REK and the password-derived KEK]].
FCS_STG_EXT.2.2
DEKs and KEKs and [no other keys] shall be encrypted using one of the following methods:
[using AES in the [GCM, CBC mode]]. (TD0038 applied)
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 21 of 65
5.1.2.22 Extended: Integrity of encrypted key storage (FCS_STG_EXT.3)
FCS_STG_EXT.3.1
The TSF shall protect the integrity of any encrypted DEKs and KEKs and [no other keys] by [-
[GCM] cipher mode for encryption according to FCS_STG_EXT.2;].
FCS_STG_EXT.3.2
The TSF shall verify the integrity of the [MAC] of the stored key prior to use of the key.
5.1.2.23 Extended: EAP TLS Protocol (FCS_TLSC_EXT.1)
FCS_TLSC_EXT.1.1
The TSF shall implement TLS 1.0 and [TLS 1.1, TLS 1.2] supporting the following ciphersuites:
[Mandatory Ciphersuites:
o TLS_RSA_WITH_AES_128_CBC_SHA as defined in RFC 5246
Optional Ciphersuites: [
o TLS_RSA_WITH_AES_256_CBC_SHA as defined in RFC 5246,
o TLS_DHE_RSA_WITH_AES_128_CBC_SHA as defined in RFC 5246,
o TLS_DHE_RSA_WITH_AES_256_CBC_SHA as defined in RFC 5246,
o TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA as defined in RFC 4492,
o TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA as defined in RFC 4492,
o TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA as defined in RFC 4492,
o TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA as defined in RFC 4492,
o TLS_RSA_WITH_AES_128_CBC_SHA256 as defined in RFC 5246,
o TLS_RSA_WITH_AES_256_CBC_ SHA256 as defined in RFC 5246,
o TLS_DHE_RSA_WITH_AES_128_CBC_ SHA256 as defined in RFC 5246,
o TLS_DHE_RSA_WITH_AES_256_CBC_ SHA256 as defined in RFC 5246,
o TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 as defined in RFC 5289,
o TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 as defined in RFC 5289,
o TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 as defined in RFC 5289,
o TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 as defined in RFC 5289]].
FCS_TLSC_EXT.1.2
The TSF shall verify that the server certificate presented for EAP-TLS [chains to one of the
specified CAs].
FCS_TLSC_EXT.1.3
The TSF shall not establish a trusted channel if the peer certificate is invalid.
FCS_TLSC_EXT.1.4
The TSF shall support mutual authentication using X.509v3 certificates.
FCS_TLSC_EXT.1.5
The TSF shall present the Supported Elliptic Curves Extension in the Client Hello with the
following NIST curves: [secp256r1, secp384r1, secp521r1] and no other curves.
5.1.2.24 Extended: TLS Protocol (FCS_TLSC_EXT.2)
FCS_TLSC_EXT.2.1
The TSF shall implement TLS 1.2 (RFC 5246) supporting the following ciphersuites: [
Mandatory Ciphersuites:
o TLS_RSA_WITH_AES_128_CBC_SHA as defined in RFC 5246
Optional Ciphersuites: [
o TLS_RSA_WITH_AES_256_CBC_SHA as defined in RFC 5246,
o TLS_DHE_RSA_WITH_AES_128_CBC_SHA as defined in RFC 5246,
o TLS_DHE_RSA_WITH_AES_256_CBC_SHA as defined in RFC 5246,
o TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA as defined in RFC 4492,
o TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA as defined in RFC 4492,
o TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA as defined in RFC 4492,
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 22 of 65
o TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA as defined in RFC 4492,
o TLS_RSA_WITH_AES_128_CBC_SHA256 as defined in RFC 5246,
o TLS_RSA_WITH_AES_256_CBC_ SHA256 as defined in RFC 5246,
o TLS_DHE_RSA_WITH_AES_128_CBC_ SHA256 as defined in RFC 5246,
o TLS_DHE_RSA_WITH_AES_256_CBC_ SHA256 as defined in RFC 5246,
o TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 as defined in RFC 5289,
o TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 as defined in RFC 5289 ,
o TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 as defined in RFC 5289,
o TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 as defined in RFC 5289]].
FCS_TLSC_EXT.2.2
The TSF shall verify that the presented identifier matches the reference identifier according to
RFC 6125.
FCS_TLSC_EXT.2.3
The TSF shall not establish a trusted channel if the peer certificate is invalid.
FCS_TLSC_EXT.2.4
The TSF shall support mutual authentication using X.509v3 certificates.
FCS_TLSC_EXT.2.5
The TSF shall present the Supported Elliptic Curves Extension in the Client Hello with the
following NIST curves: [secp256r1, secp384r1, secp521r1] and no other curves.
5.1.3 User data protection (FDP)
5.1.3.1 Extended: Security access control (FDP_ACF_EXT.1(1))
FDP_ACF_EXT.1(1).1
The TSF shall provide a mechanism to restrict the system services that are accessible to an
application.
FDP_ACF_EXT.1(1).2
The TSF shall provide an access control policy that prevents [application processes] from
accessing [all] data stored by other [application processes]. Exceptions may only be explicitly
authorized for such sharing by [a common application developer].
FDP_ACF_EXT.1(1).3
The TSF shall enforce an access control policy that prohibits an application from granting both
write and execute permission to a file on the device except for [application’s private data folder].
(TD0103 applied)
5.1.3.2 Extended: Security access control (FDP_ACF_EXT.1(2))
FDP_ACF_EXT.1(2).1
The TSF shall provide a mechanism to restrict the system services that are accessible to an
application.
FDP_ACF_EXT.1(2).2
The TSF shall provide an access control policy that prevents [groups of application processes]
from accessing [all] data stored by other [groups of application processes]. Exceptions may only
be explicitly authorized for such sharing by [the administrator].
5.1.3.3 Extended: Protected Data Encryption (FDP_DAR_EXT.1)
FDP_DAR_EXT.1.1
Encryption shall cover all protected data.
FDP_DAR_EXT.1.2
Encryption shall be performed using DEKs with AES in the [CBC, GCM, XTS] mode with key
size [128,256] bits.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 23 of 65
5.1.3.4 Extended: Sensitive Data Encryption (FDP_DAR_EXT.2)
FDP_DAR_EXT.2.1
The TSF shall provide a mechanism for applications to mark data and keys as sensitive.
FDP_DAR_EXT.2.2
The TSF shall use an asymmetric key scheme to encrypt and store sensitive data received while
the product is locked.
FDP_DAR_EXT.2.3
The TSF shall encrypt any stored symmetric key and any stored private key of the asymmetric
key(s) used for the protection of sensitive data according to FCS_STG_EXT.2.1 selection 2.
FDP_DAR_EXT.2.4
The TSF shall decrypt the sensitive data that was received while in the locked state upon
transitioning to the unlocked state using the asymmetric key scheme and shall re-encrypt that
sensitive data using the symmetric key scheme.
5.1.3.5 Extended: Subset information flow control (FDP_IFC_EXT.1)
FDP_IFC_EXT.1.1
The TSF shall [enable all IP traffic (other than IP traffic required to establish the VPN
connection) to flow through the IPsec VPN client].
5.1.3.6 Extended: User Data Storage (FDP_STG_EXT.1)
FDP_STG_EXT.1.1
The TSF shall provide protected storage for the Trust Anchor Database.
5.1.3.7 Extended: Inter-TSF user data transfer protection (FDP_UPC_EXT.1)
FDP_UPC_EXT.1.1
The TSF provide a means for non-TSF applications executing on the TOE to use TLS, HTTPS,
Bluetooth BR/EDR, and [Bluetooth LE] to provide a protected communication channel between
the non-TSF application and another IT product that is logically distinct from other
communication channels, provides assured identification of its end points, protects channel data
from disclosure, and detects modification of the channel data.
FDP_UPC_EXT.1.2
The TSF shall permit the non-TSF applications to initiate communication via the trusted channel.
5.1.4 Identification and authentication (FIA)
5.1.4.1 Authentication failure handling (FIA_AFL_EXT.1(1))
FIA_AFL_EXT.1(1).1
The TSF shall detect when a configurable positive integer within [1-100] of unsuccessful
authentication attempts occur related to last successful non container authentication by that user.
FIA_AFL_EXT.1(1).2
When the defined number of unsuccessful non container authentication attempts has been
surpassed, the TSF shall perform wipe of all protected data.
FIA_AFL_EXT.1(1).3
The TSF shall maintain the number of unsuccessful non container authentication attempts that
have occurred upon power off.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 24 of 65
5.1.4.2 Authentication failure handling (FIA_AFL_EXT.1(2))
FIA_AFL_EXT.1(2).1
The TSF shall detect when a configurable positive integer within [1-99] of unsuccessful
authentication attempts occur related to last successful container authentication by that user.
FIA_AFL_EXT.1(2).2
When the defined number of unsuccessful container authentication attempts has been surpassed,
the TSF shall perform wipe of all protected data.
FIA_AFL_EXT.1(2).3
The TSF shall maintain the number of unsuccessful container authentication attempts that have
occurred upon power off.
5.1.4.3 Extended: Bluetooth User Authorization (FIA_BLT_EXT.1)
FIA_BLT_EXT.1.1
The TSF shall require explicit user authorization before pairing with a remote Bluetooth device.
FIA_BLT_EXT.1.2
The TSF shall require explicit user authorization before granting trusted remote devices access to
services associated with the following Bluetooth profiles: [OPP, MAP], and shall require explicit
user authorization before granting untrusted remote devices access to services associated with the
following Bluetooth profiles: [all Bluetooth profiles].
5.1.4.4 Extended: Bluetooth Authentication (FIA_BLT_EXT.2)
FIA_BLT_EXT.2.1
The TSF shall require Bluetooth mutual authentication between devices prior to any data transfer
over the Bluetooth link.
FIA_BLT_EXT.2.2
Removed to FIA_BLT_EXT.3 per TD0030.
5.1.4.5 Rejection of Duplicate Bluetooth Connections (FIA_BLT_EXT.3)
FIA_BLT_EXT.3.1
The TSF shall discard connection attempts from a Bluetooth device address (BD_ADDR) to
which a current connection already exists. (Formerly FIA_BLT_EXT.2.2 per TD0030)
5.1.4.6 Extended: PAE Authentication (FIA_PAE_EXT.1)
FIA_PAE_EXT.1.1
The TSF shall conform to IEEE Standard 802.1X for a Port Access Entity (PAE) in the
'Supplicant' role.
5.1.4.7 Extended: Password Management (FIA_PMG_EXT.1)
FIA_PMG_EXT.1.1
The TSF shall support the following for the Password Authentication Factor:
1. Passwords shall be able to be composed of any combination of [upper and lower case letters],
numbers, and special characters: [ ! @ # $ % ^ & * ( ) + = _ / - ' " : ; , ? ` ~ \ | < > { } [ ] ];
2. Password length up to [16] characters shall be supported.
5.1.4.8 Extended: Authentication Throttling (FIA_TRT_EXT.1)
FIA_TRT_EXT.1.1
The TSF shall limit automated user authentication attempts by [enforcing a delay between
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 25 of 65
incorrect authentication attempts]. The minimum delay shall be such that no more than 10
attempts can be attempted per 500 milliseconds.
5.1.4.9 Protected authentication feedback (FIA_UAU.7)
FIA_UAU.7.1
The TSF shall provide only [obscured feedback to the device’s display] to the user while the
authentication is in progress.
5.1.4.10 Extended: Authentication for Cryptographic Operation (FIA_UAU_EXT.1)
FIA_UAU_EXT.1.1
The TSF shall require the user to present the Password Authentication Factor prior to decryption
of protected data and encrypted DEKs, KEKs and [no other keys] at startup.
5.1.4.11 Extended: Timing of Authentication (FIA_UAU_EXT.2)
FIA_UAU_EXT.2.1
The TSF shall allow [[enter password to unlock, make emergency calls, receive calls, take
pictures and screen shots (automatically named and stored internally by the TOE), turn the
TOE off, restart the TOE, enable emergency mode, enable and disable airplane mode, see
notifications, configure sound/vibrate/mute, set the volume (up and down) for various sound
categories, see the configured banner, access Notification Panel functions (including toggles
Always on Display, Flashlight, Do not disturb toggle, Airplane mode, Power saving, Auto rotate,
and Sound (on, mute, vibrate) and access user configured Edge applications]] on behalf of the
user to be performed before the user is authenticated.
FIA_UAU_EXT.2.2
The TSF shall require each user to be successfully authenticated before allowing any other TSF-
mediated actions on behalf of that user.
5.1.4.12 Extended: Re-Authentication (FIA_UAU_EXT.3)
FIA_UAU_EXT.3.1
The TSF shall require the user to enter the correct Password Authentication Factor when the user
changes the Password Authentication Factor, and following TSF- and user-initiated locking in
order to transition to the unlocked state, and [[when changing the lock screen, when changing
one's password, and when initializing the keystore]].
5.1.4.13 Extended: Validation of certificates (FIA_X509_EXT.1)
FIA_X509_EXT.1.1
The TSF shall validate certificates in accordance with the following rules:
- RFC 5280 certificate validation and certificate path validation.
- The certificate path must terminate with a certificate in the Trust Anchor Database.
- The TSF shall validate a certificate path by ensuring the presence of the basicConstraints
extension and that the CA flag is set to TRUE for all CA certificates.
- The TSF shall validate the revocation status of the certificate using [the Online Certificate
Status Protocol (OCSP) as specified in RFC 2560, a Certificate Revocation List (CRL) as
specified in RFC 5759].
- The TSF shall validate the extendedKeyUsage field according to the following rules:
o Certificates used for trusted updates and executable code integrity verification shall have the
Code Signing purpose (id-kp 3 with OID 1.3.6.1.5.5.7.3.3) in the extendedKeyUsage field.
o Server certificates presented for TLS shall have the Server Authentication purpose (id-kp 1 with
OID 1.3.6.1.5.5.7.3.1) in the extendedKeyUsage field.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 26 of 65
o (Conditional) Server certificates presented for EST shall have the CMC Registration Authority
(RA) purpose (id-kp-cmcRA with OID 1.3.6.1.5.5.7.3.28) in the extendedKeyUsage field.
FIA_X509_EXT.1.2
The TSF shall only treat a certificate as a CA certificate if the basicConstraints extension is
present and the CA flag is set to TRUE.
5.1.4.14 Extended: X509 certificate authentication (FIA_X509_EXT.2)
FIA_X509_EXT.2.1
The TSF shall use X.509v3 certificates as defined by RFC 5280 to support authentication for
EAP-TLS exchanges, and [IPsec, TLS, HTTPS], and [no additional uses].
FIA_X509_EXT.2.2
When the TSF cannot establish a connection to determine the validity of a certificate, the TSF
shall [not accept the certificate].
5.1.4.15 Extended: Request Validation of certificates (FIA_X509_EXT.3)
FIA_X509_EXT.3.1
The TSF shall provide a certificate validation service to applications.
FIA_X509_EXT.3.2
The TSF shall respond to the requesting application with the success or failure of the validation.
5.1.5 Security management (FMT)
5.1.5.1 Extended: Management of security functions behavior (FMT_MOF_EXT.1)
FMT_MOF_EXT.1.1
The TSF shall restrict the ability to perform the functions in column 3 of Table 1 Table 2 Security
Management Functions to the user.
FMT_MOF_EXT.1.2(1)
The TSF shall restrict the ability to perform the non container functions in column 5 of Table 2
Security Management Functions to the administrator when the device is enrolled and according
to the administrator-configured policy.
FMT_MOF_EXT.1.2(2)
The TSF shall restrict the ability to perform the container functions in column 7 of Table 2
Security Management Functions to the administrator when the device is enrolled and
according to the administrator-configured policy.
5.1.5.2 Extended: Specification of Management Functions (FMT_SMF_EXT.1)
FMT_SMF_EXT.1.1
The TSF shall be capable of performing the functions: in column 2 of Table 2 Security
Management Functions.
FMT_SMF_EXT.1.2(1)
The TSF shall be capable of allowing the administrator to perform the non-container
functions in column 4 of Table 2 Security Management Functions.
FMT_SMF_EXT.1.2(2)
The TSF shall be capable of allowing the administrator to perform the container functions in
column 6 of Table 2 Security Management Functions.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 27 of 65
Table 2 Security Management Functions
Management Function
FMT_SMF_EXT.1.1
FMT_MOF_EXT.1.1
FMT_SMF_EXT.1.2(1)
FMT_MOF_EXT.1.2(1)
FMT_SMF_EXT.1.2(2)
FMT_MOF_EXT.1.2(2)
1. configure password policy:
a. minimum password length
b. minimum password complexity
c. maximum password lifetime
The administrator can configure the required password characteristics
(minimum length, complexity, and lifetime) using the Android MDM APIs.
There are distinct settings for the passwords used to unlock the base device
and KNOX Workspace container.
Length: an integer value of characters (0 = no minimum)
Complexity: Unspecified, Something, Numeric, Alphabetic, Alphanumeric,
Complex.
Lifetime: an integer value of days (0 = no maximum)
M M M I I
2. configure session locking policy:
a. screen-lock enabled/disabled
b. screen lock timeout
c. number of authentication failures
The administrator can configure the session locking policy using the Android
MDM APIs. There are distinct settings for base device and KNOX Workspace
container inactivity.
The user can also adjust each of the session locking policies for the base
device and KNOX Workspace container; however, if set by the administrator,
the user can only set a more strict policy (e.g., setting the device to allow
fewer authentication failures than configured by the administrator).
Screen lock timeout: an integer number of minutes before the TOE locks (0 =
no lock timeout)
Authentication failures: an integer number (0 = no limit)
M M M I I
3. enable/disable the VPN protection:
a. across device
[ c. no other method]
The user can configure and then enable the TOE’s VPN to protect traffic.
M I I
Status Markers:
M – Mandatory
I – Implemented
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 28 of 65
Management Function
FMT_SMF_EXT.1.1
FMT_MOF_EXT.1.1
FMT_SMF_EXT.1.2(1)
FMT_MOF_EXT.1.2(1)
FMT_SMF_EXT.1.2(2)
FMT_MOF_EXT.1.2(2)
The administrator (through an MDM Agent that utilizes the TOE’s MDM
APIs) can restrict the TOE’s ability to connect to a VPN.
4. enable/disable [nfc, Bluetooth, Wi-Fi, and cellular radios]
The administrator can disable the radios using the TOE’s MDM APIs. Once
disabled, a user cannot enable the radio. The TOE’s radio’s operate at
frequencies of 2.4 GHz (NFC/Bluetooth), 2.4/5 GHz (Wi-Fi), and 850 MHz
(4G/LTE). The administrator cannot fully disable/restrict cellular voice
capabilities
M I I
5. enable/disable [camera, microphone]: (TD0044 applied)
a. across device
[ c. no other method]
An administrator may configure the TOE (through an MDM agent utilizing
the TOE’s MDM APIs) to turn off the camera and or microphones. If the
administrator has disabled either the camera or the microphones, then the
user cannot use those capture devices.
The administrator can also disable the use of the camera or microphone
inside a KNOX Workspace container without affecting access to those
devices when outside the container.
M I I I I
6. specify wireless networks (SSIDs) to which the TSF may connect (TD0064
applied)
An administrator can specify a list of wireless network SSIDs to which the
TOE may connect and can restrict the TOE to only allow a connection to the
specified SSIDs.
I I I
7. configure security policy for each wireless network:
a. [specify the CA(s) from which the TSF will accept WLAN
authentication server certificate(s)]
b. security type
c. authentication protocol
d. client credentials to be used for authentication
Both users and administrators (using the TOE’s MDM APIs) can define
wireless connection policies for specific SSIDs.
M M
Status Markers:
M – Mandatory
I – Implemented
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 29 of 65
Management Function
FMT_SMF_EXT.1.1
FMT_MOF_EXT.1.1
FMT_SMF_EXT.1.2(1)
FMT_MOF_EXT.1.2(1)
FMT_SMF_EXT.1.2(2)
FMT_MOF_EXT.1.2(2)
8. transition to the locked state
Both users and administrators (using the TOE’s MDM APIs) can transition the
TOE or KNOX Workspace container into a locked state.
M M - I
9. full wipe of protected data
Both users and administrators (using the TOE’s MDM APIs) can force the TOE
to perform a full wipe (factory reset) of data. Administrators can also cause
the contents of a KNOX Workspace container to be wiped by deleting the
container.
M M I
10. configure application installation policy by:
c. denying installation of applications]
The administrator using the TOE’s MDM APIs can configure the TOE so that
applications cannot be installed and can also block the use of the Google
Market Place. There are distinct settings for disabling the installation of
applications for the base device and KNOX Workspace container.
M M M I I
11. import keys/secrets into the secure key storage
Both users and administrators (using the TOE’s MDM APIs) can import secret
keys into the secure key storage.
M I
12. destroy imported keys/secrets and [no other keys/secrets] in the secure
key storage
Both users and administrators (using the TOE’s MDM APIs) can destroy
secret keys in the secure key storage.
M I
13. import X.509v3 certificates into the Trust Anchor Database
Both users and administrators (using the TOE’s MDM APIs) can import
X.509v3 certificates into the Trust Anchor Database.
M M
14. remove imported X.509v3 certificates and [default X.509v3 certificates]
in the Trust Anchor Database
Both users and administrators (using the TOE’s MDM APIs) can remove
imported X.509v3 certificates from the Trust Anchor Database as well as
disable any of the TOE’s default Root CA certificates (in the latter case, the
CA certificate still resides in the TOE’s read-only system partition; however,
the TOE will treat that Root CA certificate and any certificate chaining to it as
M I
Status Markers:
M – Mandatory
I – Implemented
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 30 of 65
Management Function
FMT_SMF_EXT.1.1
FMT_MOF_EXT.1.1
FMT_SMF_EXT.1.2(1)
FMT_MOF_EXT.1.2(1)
FMT_SMF_EXT.1.2(2)
FMT_MOF_EXT.1.2(2)
untrusted).
15. enroll the TOE in management (TD0058 applied)
TOE users can enroll the TOE in management according to the instructions
specific to a given MDM. Presumably any enrollment would involve at least
some user functions (e.g., install an MDM agent application) on the TOE
prior to enrollment.
M M
16. remove applications
Both users and administrators (using the TOE’s MDM APIs) can uninstall user
and administrator installed applications on the TOE (non-container) and
applications inside a KNOX Workspace container.
M M I
17. update system software
Users can check for updates and cause the device to update if an update is
available. An administrator can use MDM APIs to query the version of the
TOE and query the installed applications and an MDM agent on the TOE
could issue pop-ups, initiate updates, block communication, etc. until any
necessary updates are completed.
M M
18. install applications
Both users and administrators (using the TOE’s MDM APIs) can install
applications on the TOE (non-container) and applications inside a KNOX
Workspace container.
M M I
19. remove Enterprise applications
Both users and administrators (using the TOE’s MDM APIs) can uninstall user
and administrator installed applications on the TOE (non-container) and
applications inside a KNOX Workspace container. Note that there is no
distinction between Enterprise and other applications.
M M I
20. configure the Bluetooth trusted channel:
a. disable/enable the Discoverable mode (for BR/EDR)
b. change the Bluetooth device name
[ c. allow/disallow Android Beam and S-Beam to be used with
Bluetooth
f. disable/enable the Bluetooth services and or profiles available on
the device]
M I
Status Markers:
M – Mandatory
I – Implemented
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 31 of 65
Management Function
FMT_SMF_EXT.1.1
FMT_MOF_EXT.1.1
FMT_SMF_EXT.1.2(1)
FMT_MOF_EXT.1.2(1)
FMT_SMF_EXT.1.2(2)
FMT_MOF_EXT.1.2(2)
TOE users can enable Bluetooth discoverable mode for a short period of
time and can also change the device name which is used for the Bluetooth
name. Additional wireless technologies include Android Beam and S-Beam
which are related to NFC and can be enabled and disabled by the TOE user.
21. enable/disable display notification in the locked state of: [
f. all notifications]
TOE users can configure the TOE to allow or disallow notifications while in a
locked state.
M
22. enable/disable all data signaling over [USB]
The administrator (using the TOE’s MDM APIs) can disable USB
communication features (tethering, debugging, mass storage access, etc.) to
prevent data signaling via USB.
I I I
23. enable/disable [Wi-Fi tethering, USB tethering, and Bluetooth
tethering]
The administrator (using the TOE’s MDM APIs) can individually disable each
tethering method.
Unless disabled by the administrator, TOE users can individually enable and
disable tethering via a Wi-Fi hotspot, USB connection, and Bluetooth pairing.
The TOE acts as a server (acting as an access point, a USB Ethernet adapter,
and as a Bluetooth Ethernet adapter respectively) in order to share its
network connection with another device.
I I I
24. enable/disable developer modes
The administrator (using the TOE’s MDM APIs) can disable Developer Mode.
Unless disabled by the administrator, TOE users can enable and disable
Developer Mode.
I I I
25. enable data-at rest protection
The administrator (using the TOE’s MDM APIs) can configure a device
encryption policy. Once enabled the TOE internal flash will be encrypted.
I I I
Status Markers:
M – Mandatory
I – Implemented
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 32 of 65
Management Function
FMT_SMF_EXT.1.1
FMT_MOF_EXT.1.1
FMT_SMF_EXT.1.2(1)
FMT_MOF_EXT.1.2(1)
FMT_SMF_EXT.1.2(2)
FMT_MOF_EXT.1.2(2)
Users can also encrypt the TOE internal flash even if not enforced by
administrator policy. However, if the policy is set the user cannot decrypt
the TOE.
26. enable removable media’s data-at-rest protection
The administrator (using the TOE’s MDM APIs) can configure a device
removable media encryption policy. Once enabled, files on external SD cards
will be encrypted. Users can also encrypt the TOE internal flash even if not
enforced by administrator policy. However, if the policy is set the user
cannot decrypt the TOE.
I I I
27. enable/disable bypass of local user authentication
28. wipe Enterprise data I
29. approve [import] by applications of X.509v3 certificates in the Trust
Anchor Database
The TOE will prompt the User to approve requests by an application to
import an X.509v3 CA Certificate into the TOE’s Trust Anchor Database. The
User, when prompted, can allow or deny the import.
30. configure whether to establish a trusted channel or disallow
establishment if the TSF cannot establish a connection to determine the
validity of a certificate
31. enable/disable the cellular protocols used to connect to cellular network
base stations
32. read audit logs kept by the TSF
The administrator (using MDM APIs) can view the TOE’s audit records.
I I
33. configure [selection: certificate, public-key] used to validate digital
signature on applications
34. approve exceptions for shared use of keys/secrets by multiple
applications
35. approve exceptions for destruction of keys/secrets by applications that
did not import the key/secret
36. configure the unlock banner
The administrator (using the TOE’s MDM APIs) can defined a banner of a
maximum of 256 characters to be displayed while the TOE is locked. There is
no method for the user to change the banner.
I I I
Status Markers:
M – Mandatory
I – Implemented
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 33 of 65
Management Function
FMT_SMF_EXT.1.1
FMT_MOF_EXT.1.1
FMT_SMF_EXT.1.2(1)
FMT_MOF_EXT.1.2(1)
FMT_SMF_EXT.1.2(2)
FMT_MOF_EXT.1.2(2)
37. configure the auditable items
38. retrieve TSF-software integrity verification values
39. enable/disable [
a. USB mass storage mode]
The administrator (using the TOE’s MDM APIs) can disable USB mass storage
mode.
I I I
40. enable/disable backup to [local system, remote system]
The TOE user can configure and enable/disable a Google backup feature to
backup application data.
I I I
41. enable/disable [
a. Hotspot functionality authenticated by [pre-shared key],
b. USB tethering authenticated by [no authentication]]
The administrator (using the TOE’s MDM APIs) can disable the Wi-Fi hotspot
and USB tethering.
Unless disabled by the administrator, TOE users can configure the Wi-Fi
hotspot with a pre-shared key and can configure USB tethering (with no
authentication).
I I I
42. approve exceptions for sharing data between [groups of application
processes]
I
43. place applications into application process groups based on [assignment:
application characteristics]
44. enable/disable location services:
a. across device
[ c. no other method]
The administrator (using the TOE’s MDM APIs) can disable location services.
Unless disabled by the administrator, TOE users can enable and disable
location services.
M I I
45. [enable/disable USB host storage
disable CC Mode]
I
I
I
I I I
Status Markers:
M – Mandatory
I – Implemented
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 34 of 65
5.1.5.3 Extended: Specification of Remediation Actions (FMT_SMF_EXT.2(1))
FMT_SMF_EXT.2(1).1
The TSF shall offer [wipe of protected data, wipe of sensitive data, [remove MDM policies and
disable CC mode]] upon non container unenrollment and [no other triggers].
5.1.5.4 Extended: Specification of Remediation Actions (FMT_SMF_EXT.2(2))
FMT_SMF_EXT.2(2).1
The TSF shall offer [[remove Enterprise applications, full wipe of container data]] upon
container unenrollment and [no other triggers].
5.1.6 Protection of the TSF (FPT)
5.1.6.1 Extended: Anti-Exploitation Services (ASLR) (FPT_AEX_EXT.1)
FPT_AEX_EXT.1.1
The TSF shall provide address space layout randomization (ASLR) to applications.
FPT_AEX_EXT.1.2
The base address of any user-space memory mapping will consist of at least 8 unpredictable bits.
FPT_AEX_EXT.1.3
The TSF shall provide address space layout randomization (ASLR) to the kernel.
FPT_AEX_EXT.1.4
The base address of any kernel-space memory mapping will consist of at least 4 unpredictable bits.
5.1.6.2 Extended: Anti-Exploitation Services (Memory Page Permissions) (FPT_AEX_EXT.2)
FPT_AEX_EXT.2.1
The TSF shall be able to enforce read, write, and execute permissions on every page of physical
memory.
FPT_AEX_EXT.2.2
The TSF shall prevent write and execute permissions from being simultaneously granted to any
page of physical memory [excluding memory used for JIT (just-in-time) compilation and
memory allocated with mmap].
5.1.6.3 Extended: Anti-Exploitation Services (Overflow Protection) (FPT_AEX_EXT.3)
FPT_AEX_EXT.3.1
TSF processes that execute in a non-privileged execution domain on the application processor
shall implement stack-based buffer overflow protection.
5.1.6.4 Extended: Domain Isolation (FPT_AEX_EXT.4)
FPT_AEX_EXT.4.1
The TSF shall protect itself from modification by untrusted subjects.
FPT_AEX_EXT.4.2
The TSF shall enforce isolation of address space between applications.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 35 of 65
5.1.6.5 Application Processor Mediation (FPT_BBD_EXT.1)
FPT_BBD_EXT.1.1
The TSF shall prevent code executing on any baseband processor (BP) from accessing application
processor (AP) resources except when mediated by the AP.
5.1.6.6 Extended: Key Storage (FPT_KST_EXT.1)
FPT_KST_EXT.1.1
The TSF shall not store any plaintext key material in readable non-volatile memory.
5.1.6.7 Extended: No Key Transmission (FPT_KST_EXT.2)
FPT_KST_EXT.2.1
The TSF shall not transmit any plaintext key material outside the security boundary of the TOE.
5.1.6.8 Extended: No Plaintext Key Export (FPT_KST_EXT.3)
FPT_KST_EXT.3.1
The TSF shall ensure it is not possible for the TOE user(s) to export plaintext keys.
5.1.6.9 Extended: Self-Test Notification (FPT_NOT_EXT.1)
FPT_NOT_EXT.1.1
The TSF shall transition to non-operational mode and [force User authentication failure] when
the following types of failures occur:
- failures of the self-test(s)
- TSF software integrity verification failures
- [no other failures].
5.1.6.10 Reliable time stamps (FPT_STM.1)
FPT_STM.1.1
The TSF shall be able to provide reliable time stamps for its own use.
5.1.6.11 Extended: TSF Cryptographic Functionality Testing (FPT_TST_EXT.1)
FPT_TST_EXT.1.1
The TSF shall run a suite of self-tests during initial start-up (on power on) to demonstrate the
correct operation of all cryptographic functionality.
5.1.6.12 Extended: TSF Integrity Testing (FPT_TST_EXT.2)
FPT_TST_EXT.2.1
The TSF shall verify the integrity of the bootchain up through the Application Processor OS
kernel, and [
System executable File System locaion Security Function
app_process /system/bin APP
charon /system/bin VPN
dalvikvm /system/bin VM
dhcpcd /system/bin Integrity
gatekeeperd /system/bin Key store / Key Mgnt
icd /system/bin Integrity
keystore /system/bin Key store
mcDriverDaemon /system/bin Trustzone Daemon
qseecomd /system/bin Trustzone Daemon
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 36 of 65
System executable File System locaion Security Function
sdp_cryptod /system/bin DAR
time_daemon /system/bin TIME
vold /system/bin DAR
wpa_supplicant /system/bin WLAN
libSecurityManagerNative.so /system/lib , /system/lib64 CCMode
libcharon.so /system/lib , /system/lib64 VPN
libcrypto.so /system/lib , /system/lib64 Crypto
libdirencryption.so /system/lib , /system/lib64 DAR
libjavacrypto.so /system/lib , /system/lib64 Crypto
libkeystore_binder.so /system/lib , /system/lib64 Key store
libkeyutils.so /system/lib , /system/lib64 Key store
libknox_km.so /system/lib , /system/lib64 DAR
libsdp_crypto.so /system/lib , /system/lib64 DAR
libsdp_kekm.so /system/lib , /system/lib64 DAR
libsdp_sdk.so /system/lib , /system/lib64 DAR
libsec_devenc.so /system/lib , /system/lib64 DAR
libsec_ecryptfs.so /system/lib , /system/lib64 DAR
libsec_ode_keymanager.so /system/lib , /system/lib64 DAR
libskmm.so /system/lib , /system/lib64 Key Mgnt
libskmm_helper.so /system/lib , /system/lib64 Key Mgnt
libsoftwarekeymaster.so /system/lib , /system/lib64 Key Mgnt
libssl.so /system/lib , /system/lib64 Crypto
libstrongswan.so /system/lib , /system/lib64 VPN
libQSEEComAPI.so /system/vendor/lib,
/system/vendor/lib64
Trustzone Library
], stored in mutable media prior to its execution through the use of [a digital signature using a
hardware-protected asymmetric key, a hardware-protected hash].
5.1.6.13 Extended: Trusted Update: TSF version query (FPT_TUD_EXT.1)
FPT_TUD_EXT.1.1
The TSF shall provide authorized users the ability to query the current version of the TOE
firmware/software.
FPT_TUD_EXT.1.2
The TSF shall provide authorized users the ability to query the current version of the hardware
model of the device.
FPT_TUD_EXT.1.3
The TSF shall provide authorized users the ability to query the current version of installed mobile
applications.
5.1.6.14 Extended: Trusted Update Verification (FPT_TUD_EXT.2)
FPT_TUD_EXT.2.1
The TSF shall verify software updates to the Application Processor system software and
[[communications processor software, bootloader software, carrier specific configuration]]
using a digital signature by the manufacturer prior to installing those updates.
FPT_TUD_EXT.2.2
The TSF shall [update only by verified software] the TSF boot integrity [key, hash].
FPT_TUD_EXT.2.3
The TSF shall verify that the digital signature verification key used for TSF updates [is validated
to a public key in the Trust Anchor Database].
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 37 of 65
FPT_TUD_EXT.2.4
The TSF shall verify mobile application software using a digital signature mechanism prior to
installation.
FPT_TUD_EXT.2.7
The TSF shall verify that software updates to the TSF are a current or later version than the current
version of the TSF.
5.1.7 TOE access (FTA)
5.1.7.1 Extended: TSF- and User-initiated locked state (FTA_SSL_EXT.1)
FTA_SSL_EXT.1.1
The TSF shall transition to a locked state after a time interval of inactivity.
FTA_SSL_EXT.1.2
The TSF shall transition to a locked state after initiation by either the user or the administrator.
FTA_SSL_EXT.1.3
The TSF shall, upon transitioning to the locked state, perform the following operations:
a) clearing or overwriting display devices, obscuring the previous contents;
b) [no other actions].
5.1.7.2 Default TOE Access Banners (FTA_TAB.1)
FTA_TAB.1.1
Before establishing a user session, the TSF shall display an advisory warning message regarding
unauthorized use of the TOE.
5.1.7.3 Extended: Wireless Network Access (FTA_WSE_EXT.1)
FTA_WSE_EXT.1.1
The TSF shall be able to attempt connections to wireless networks specified as acceptable
networks as configured by the administrator in FMT_SMF_EXT.1.
5.1.8 Trusted path/channels (FTP)
5.1.8.1 Extended: Trusted channel Communication (FTP_ITC_EXT.1)
FTP_ITC_EXT.1.1
The TSF shall use 802.11-2012, 802.1X, and EAP-TLS and [IPsec and TLS] to provide a
communication channel between itself and another trusted IT product that is logically distinct
from other communication channels, provides assured identification of its end points, protects
channel data from disclosure, and detects modification of the channel data.
FTP_ITC_EXT.1.2
The TSF shall permit the TSF to initiate communication via the trusted channel.
FTP_ITC_EXT.1.3
The TSF shall initiate communication via the trusted channel for wireless access point
connections, administrative communication, configured enterprise connections, and [no other
connections].
5.2 TOE Security Assurance Requirements
The SARs for the TOE are the EAL 1 augmented with ALC_TSU_EXT.1 components as specified in Part 3 of the
Common Criteria. Note that the SARs have effectively been refined with the assurance activities explicitly defined
in association with both the SFRs and SARs.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 38 of 65
Requirement Class Requirement Component
ADV: Development ADV_FSP.1: Basic functional specification
AGD: Guidance documents AGD_OPE.1: Operational user guidance
AGD_PRE.1: Preparative procedures
ALC: Life-cycle support ALC_CMC.1: Labelling of the TOE
ALC_CMS.1: TOE CM coverage
ALC_TSU_EXT.1: Timely Security Updates
ATE: Tests ATE_IND.1: Independent testing - conformance
AVA: Vulnerability assessment AVA_VAN.1: Vulnerability survey
Table 3 EAL 1 augmented with ALC_TSU_EXT.1 Assurance Components
5.2.1 Development (ADV)
5.2.1.1 Basic functional specification (ADV_FSP.1)
ADV_FSP.1.1d
The developer shall provide a functional specification.
ADV_FSP.1.2d
The developer shall provide a tracing from the functional specification to the SFRs.
ADV_FSP.1.1c
The functional specification shall describe the purpose and method of use for each SFR-enforcing
and SFR-supporting TSFI.
ADV_FSP.1.2c
The functional specification shall identify all parameters associated with each SFR-enforcing and
SFR-supporting TSFI.
ADV_FSP.1.3c
The functional specification shall provide rationale for the implicit categorization of interfaces as
SFR-non-interfering.
ADV_FSP.1.4c
The tracing shall demonstrate that the SFRs trace to TSFIs in the functional specification.
ADV_FSP.1.1e
The evaluator shall confirm that the information provided meets all requirements for content and
presentation of evidence.
ADV_FSP.1.2e
The evaluator shall determine that the functional specification is an accurate and complete
instantiation of the SFRs.
5.2.2 Guidance documents (AGD)
5.2.2.1 Operational user guidance (AGD_OPE.1)
AGD_OPE.1.1d
The developer shall provide operational user guidance.
AGD_OPE.1.1c
The operational user guidance shall describe, for each user role, the user-accessible functions and
privileges that should be controlled in a secure processing environment, including appropriate
warnings.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 39 of 65
AGD_OPE.1.2c
The operational user guidance shall describe, for each user role, how to use the available interfaces
provided by the TOE in a secure manner.
AGD_OPE.1.3c
The operational user guidance shall describe, for each user role, the available functions and
interfaces, in particular all security parameters under the control of the user, indicating secure
values as appropriate.
AGD_OPE.1.4c
The operational user guidance shall, for each user role, clearly present each type of security-
relevant event relative to the user-accessible functions that need to be performed, including
changing the security characteristics of entities under the control of the TSF.
AGD_OPE.1.5c
The operational user guidance shall identify all possible modes of operation of the TOE (including
operation following failure or operational error), their consequences and implications for
maintaining secure operation.
AGD_OPE.1.6c
The operational user guidance shall, for each user role, describe the security measures to be
followed in order to fulfil the security objectives for the operational environment as described in
the ST.
AGD_OPE.1.7c
The operational user guidance shall be clear and reasonable.
AGD_OPE.1.1e
The evaluator shall confirm that the information provided meets all requirements for content and
presentation of evidence.
5.2.2.2 Preparative procedures (AGD_PRE.1)
AGD_PRE.1.1d
The developer shall provide the TOE including its preparative procedures.
AGD_PRE.1.1c
The preparative procedures shall describe all the steps necessary for secure acceptance of the
delivered TOE in accordance with the developer's delivery procedures.
AGD_PRE.1.2c
The preparative procedures shall describe all the steps necessary for secure installation of the TOE
and for the secure preparation of the operational environment in accordance with the security
objectives for the operational environment as described in the ST.
AGD_PRE.1.1e
The evaluator shall confirm that the information provided meets all requirements for content and
presentation of evidence.
AGD_PRE.1.2e
The evaluator shall apply the preparative procedures to confirm that the TOE can be prepared
securely for operation.
5.2.3 Life-cycle support (ALC)
5.2.3.1 Labelling of the TOE (ALC_CMC.1)
ALC_CMC.1.1d
The developer shall provide the TOE and a reference for the TOE.
ALC_CMC.1.1c
The TOE shall be labelled with its unique reference.
ALC_CMC.1.1e
The evaluator shall confirm that the information provided meets all requirements for content and
presentation of evidence.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 40 of 65
5.2.3.2 TOE CM coverage (ALC_CMS.1)
ALC_CMS.2.1d
The developer shall provide a configuration list for the TOE.
ALC_CMS.2.1c
The configuration list shall include the following: the TOE itself; and the evaluation evidence
required by the SARs.
ALC_CMS.2.2c
The configuration list shall uniquely identify the configuration items.
ALC_CMS.2.1e
The evaluator shall confirm that the information provided meets all requirements for content and
presentation of evidence.
5.2.3.3 Timely Security Updates (ALC_TSU_EXT.1)
ALC_TSU_EXT.1.1d
The developer shall provide a description in the TSS of how timely security updates are made to
the TOE.
ALC_TSU_EXT.1.1c
The description shall include the process for creating and deploying security updates for the TOE
software/firmware.
ALC_TSU_EXT.1.2c
The description shall express the time window as the length of time, in days, between public
disclosure of a vulnerability and the public availability of security updates to the TOE.
ALC_TSU_EXT.1.3c
The description shall include the mechanisms publicly available for reporting security issues
pertaining to the TOE.
ALC_TSU_EXT.1.1e
The evaluator shall confirm that the information provided meets all requirements for content and
presentation of evidence.
5.2.4 Tests (ATE)
5.2.4.1 Independent testing - conformance (ATE_IND.1)
ATE_IND.1.1d
The developer shall provide the TOE for testing.
ATE_IND.1.1c
The TOE shall be suitable for testing.
ATE_IND.1.1e
The evaluator shall confirm that the information provided meets all requirements for content and
presentation of evidence.
ATE_IND.1.2e
The evaluator shall test a subset of the TSF to confirm that the TSF operates as specified.
5.2.5 Vulnerability assessment (AVA)
5.2.5.1 Vulnerability survey (AVA_VAN.1)
AVA_VAN.1.1d
The developer shall provide the TOE for testing.
AVA_VAN.1.1c
The TOE shall be suitable for testing.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 41 of 65
AVA_VAN.1.1e
The evaluator shall confirm that the information provided meets all requirements for content and
presentation of evidence.
AVA_VAN.1.2e
The evaluator shall perform a search of public domain sources to identify potential vulnerabilities
in the TOE.
AVA_VAN.1.3e
The evaluator shall conduct penetration testing, based on the identified potential vulnerabilities, to
determine that the TOE is resistant to attacks performed by an attacker possessing Basic attack
potential.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 42 of 65
6. TOE Summary Specification
This chapter describes the security functions:
 Cryptographic support
 User data protection
 Identification and authentication
 Security management
 Protection of the TSF
 TOE access
 Trusted path/channels
 Security Audit
6.1 Cryptographic support
FCS_CKM.1(1): The TOE supports asymmetric key generation for all types in accordance with FIPS 186-4. The
TOE generates RSA in its SCrypto library generated and DH/ECDH/ECDSA (including P-521) keys in both its
SCrypto and BoringSSL libraries. The TOE supports generating keys with a security strength of 112-bits and larger,
thus supports 2048-bit RSA and DH keys, and 256-bit ECDH/ECDSA keys. The TOE’s RSA and ECDSA
implementation have the CAVP certificates described in the FCS_COP.1 section below.
FCS_CKM.1(2): The TOE adheres to 802.11-2012 for key generation. The TOE’s wpa_supplicant provides the
PRF384 for WPA2 derivation of 128-bit AES Temporal Key and also employs its BoringSSL AES-256 DRBG
when generating random values use in the EAP-TLS and 802.11 4-way handshake. The TOE has been designed for
compliance, and the Device has successfully completed certification (including WPA2 Enterprise) and received
WiFi CERTIFIED Interoperability Certificates from the WiFi Alliance. The WiFi Alliance maintains a website
providing further information about the testing program: http://www.wi-fi.org/certification
Device Name Model
Number
WFA Certificate #’s
Galaxy Note 7 SM-N930x 65738, 65739, 66000, 66146, 66150, 66151, 66152, 66153, 66154, 66155,
66156, 66157, 66158, 66159, 66161, 66347, 66348, 66349, 66350, 66368,
66389, 66390, 66391, 66393, 66394, 66395, 66682
FCS_CKM.2(1): The TOE supports RSA (800-56B), DHE (FFC 800-56A), and ECDHE (ECC 800-56A) methods
in TLS key establishment/exchange. The TOE has CVL KAS and ECDSA CAVP algorithm certificates for Elliptic
Curve key establishment and key generation respectively as described in the FCS_COP.1 section below. The TOE
has an RSA CAVP algorithm certificate for RSA key generation and for RSA key establishment as described in the
FCS_COP.1 section below (in addition Samsung vendor-affirms the TOE’s RSA key establishment follows 800-
56B). The user and administrator need take no special configuration of the TOE as the TOE automatically generates
the keys needed for negotiated TLS ciphersuite. Because the TOE only acts as a TLS client, the TOE only performs
800-56B encryption (specifically the encryption of the Pre-Master Secret using the Server’s RSA public key) when
participating in TLS_RSA_* based TLS handshakes. Thus, the TOE does not perform 800-56B decryption.
However, the TOE’s TLS client correctly handles other cryptographic errors (for example, invalid checksums,
incorrect certificate types, corrupted certificates) by sending a TLS fatal alert.
FCS_CKM.2(2): The TOE adheres to RFC 3394, SP 800-38F, and 802.11-2012 standards and unwraps the GTK
(sent encrypted with the WPA2 KEK using AES Key Wrap in an EAPOL-Key frame). The TOE, upon receiving an
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 43 of 65
EAPOL frame, will subject the frame to a number of checks (frame length, EAPOL version, frame payload size,
EAPOL-Key type, key data length, EAPOL-Key CCMP descriptor version, and replay counter) to ensure a proper
EAPOL message and then decrypt the GTK using the KEK, thus ensuring that it does not expose the Group
Temporal Key (GTK).
FCS_CKM_EXT.1: The TOE supports a Root Encryption Key (REK) within the main (application) processor.
Requests for encryption or decryption chaining to the REK are only accessible through the Trusted Execution
Environment, or TEE (TrustZone). The REK lies in a series of 256-bit fuses, which the TOE programs during
manufacturing. The TEE does not allow direct access to the REK but provides access to use a Trusted Application
(Trustlet) specific derived HEK (Hardware Encryption Key, which is derived from the REK through a KDF
function) for encryption and decryption.
The REK value is generated during manufacturing either by the TOE (if it detects that the REK fuses have not been
set) using it hardware DRBG or is generated during fabrication using an external RBG that meets the requirements
of this PP in that the process utilizes a SHA-256 Hash_DRBG seeded by a hardware entropy source identical in
architecture to that within the TOE. This fabrication process includes strict controls (including physical and logical
access control to the manufacturing room where programming takes place as well as video surveillance and access
only to specific, authorized, trusted individuals) to ensure that fabricator cannot access any REK values between
generation and programming.
FCS_CKM_EXT.2: The TOE supports Data Encryption Key (DEK) generation using its approved RBGs. The
TOE generates AES 256-bit DEKs using its BoringSSL CTR_DRBG in response to an application through either
the Android Java API (for Android applications) or through the native C API (used internally by the TSF). For
example, the ODE (Onboard Device Encryption, responsible for encryption/decryption of the user data partition)
obtains random data using the native C API.
FCS_CKM_EXT.3: The TOE generates KEKs (which are always AES 256-bit keys generated by either the
BoringSSL CTR_DRBG or Kernel Crypto’s HMAC_DRBG) through a combination of methods. First, the TOE
generates a KEK (denoted as a Domain KEK, or DKEK) for each user of the TOE, for each Domain (where a
Domain provides separation of application data, e.g., “Corporate” or “Home”). Note that the current TOE only
supports a single Domain for each user.
The TOE generates a number of different KEKs. In addition to the DKEK, applications may request key generation
(either through the Android/Java APIs), and the TOE utilizes its BoringSSL CTR_DRBG to satisfy those requests.
The requesting application ultimately chooses whether to use that key as a DEK or a KEK (and can choose whether
it wishes that key to be 128 or 256-bits), but it is worth mentioning here, as an application can utilize such a key as a
KEK, should it choose.
FCS_CKM_EXT.4: The TOE destroys cryptographic keys when they are no longer in use by the system. The
exceptions to this are public keys (that protect the boot chain and software updates) and the REK, which are never
cleared. Keys stored in RAM during use are destroyed by a zero overwrite. Keys stored in Flash (i.e. eMMC) are
destroyed by cryptographic erasure through a BLKSECDISCARD command (as defined in the JEDEC eMMC 5.0
specification, JESD84-B50) to the flash controller for the location where the ODE and SD Card keys are stored.
Once these are erased, all keys (and data) stored within the encrypted data partition of the TOE are considered
cryptographically erased.
FCS_CKM_EXT.5: The TOE provides a TOE Wipe function that first erases the encrypted ODE DEK used to
encrypt the entire data partition using a Secure Trim command to ensure that TOE writes zeros to the eMMC blocks
containing the encrypted ODE DEK (the crypto footer contains the encrypted ODE DKEK and encrypted ODE
DEK as well as the encrypted SDCard DKEK and encrypted SDCard MKs). After overwriting that, the TOE will
reformat the partition. Upon completion of reformatting the Flash partition holding user data, the TOE will perform
a power-cycle.
FCS_CKM_EXT.6: The TOE creates salt and nonces (which are just salt values used in WPA2) using its AES-256
CTR_DRBG.
Salt value and size RBG origin Salt storage location
User password salt (256-bit) BoringSSL’s AES-256 CTR_DRBG Flash filesystem
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 44 of 65
TLS client_random (256-bit) BoringSSL’s AES-256 CTR_DRBG N/A (ephemeral)
TLS pre_master_secret (384-bit) BoringSSL’s AES-256 CTR_DRBG N/A (ephemeral)
TLS DHE/ECDHE private value (256, 384, 512) BoringSSL’s AES-256 CTR_DRBG N/A (ephemeral)
WPA2 4-way handshake supplicant nonce (SNonce) BoringSSL’s AES-256 CTR_DRBG
through wpa_supplicant
N/A (ephemeral)
FCS_COP.1: The TOE performs cryptographic algorithms in accordance with the following NIST standards and
has received the following CAVP algorithm certificates.
The BoringSSL library provides the following algorithms
Algorithm NIST Standard SFR Referenece Cert#
AES 128/256 CBC, CCM, GCM,
KW
FIPS 197, SP 800-
38A/C/D/F
FCS_COP.1(1) 3917
CVL ECC/FFC SP 800-56A FCS_CKM.1(1) 802
CVL ECC CDH P-224/256/384/521 SP 800-56A FCS_CKM.1(1) 777
DSA FFC Key Gen FIPS 186-4 FCS_CKM.1(1) 1071
DRBG CTR SP 800-90A FCS_RBG_EXT.1(1) 1132
ECDSA PKG/PKV/SigGen/SigVer FIPS 186-4 FCS_CKM.1(1)
FCS_CKM.2(1)
FCS_COP.1(3)
857
HMAC SHA-1/256/384/512 FIPS 198-1 & 180-4 FCS_COP.1(4) 2545
RSA SIG(gen)/SIG(ver) FIPS 186-4 FCS_COP.1(3) 2000
SHS SHA-1/256/384/512 FIPS 180-4 FCS_COP.1(2) 3227
Table 4 BoringSSL Cryptographic Algorithms
The Samsung Kernel Cryptographic (“Kernel Crypto”) Module provides the following algorithms
Algorithm NIST Stadnard SFR Referenece Cert#
AES 128/256 CBC FIPS 197, SP 800-38A FCS_COP.1(1) 3837
HMAC SHA-1/256/384/512 FIPS 198-1 & 180-4 FCS_COP.1(4) 2488
DRBG SHA-256 HMAC_DRBG SP 800-90A FCS_RBG_EXT.1(2) 1083
SHS SHA-1/256/384/512 FIPS 180-4 FCS_COP.1(2) 3161
Table 5 Samsung Kernel Cryptographic Algorithms
The Samsung SCrypto TEE library provides the following algorithms
Algorithm NIST Standard SFR Referenece Cert#’s
AES FIPS 197, SP 800-38 FCS_COP.1(1) 3887, 3888
CVL ECC CDH SP 800-56A FCS_CKM.1(1) 752, 753
DRBG SP 800-90A FCS_RBG_EXT.1(1) 1111, 1112
ECDSA FIPS 186-4 FCS_CKM.1(1)
FCS_CKM.2(1)
FCS_COP.1(3)
842, 843
HMAC SHA FIPS 198-1 & 180-4 FCS_COP.1(4) 2525, 2526
RSA FIPS 186-2 FCS_CKM.1(1)
FCS_CKM.2(1)
FCS_COP.1(3)
1981, 1982
SHS FIPS 180-4 FCS_COP.1(2) 3207, 3208
Table 6 SCrypto TEE Cryptographic Algorithms
The Chipset hardware provides the following algorithms
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 45 of 65
Algorithm NIST Stadnard SFR Referenece Cert#’s
AES 128/256 CBC, XTS FIPS 197, SP 800-38A FCS_COP.1(1) 3839/3556,
3558
Table 7 Chipset Hardware Cryptographic Algorithms
The TOE’s application processors include hardware entropy implementations that supply random data within the
TEE and to the Linux kernel RNG (/dev/random).
Note that kernel-space system applications utilize the cryptographic algorithm implementations in the Samsung
Kernel Cryptographic Module (Kernel Crypto) or in the Chipset hardware, while user-space system applications and
mobile applications utilize the BoringSSL library (either through a Java API or through the native C API). In the
case of each cryptographic library, the library itself includes any algorithms required (for example, BoringSSL
provides hash functions for use by HMAC and digital signature algorithms).
Trusted Applications executing with the Trusted Execution Environment (TEE) utilize the SCrypto library. For
example, the trusted application implementing the Android KeyMaster that supports the Android Key Store utilizes
the SCrypto library for all of its cryptographic functionality.
For its HMAC implementations, the TOE accepts all key sizes of 160, 256, 384, & 512; supports all SHA sizes save
224 (e.g., SHA-1, 256, 384, & 512), utilizes the specified block size (512 for SHA-1 and 256, and 1024 for SHA-
384 & 512), and output MAC lengths of 160, 256, 384, and 512.
The TOE conditions the user's password exactly as per SP 800-132 (and thus as per SP 800-197-1) with no
deviations by using PBKDF2 with 16,384 HMAC-SHA-512 iterations to combine a 128-bit salt with the user’s
password. The time needed to derive keying material does not impact or lessen the difficulty faced by an attacker’s
exhaustive guessing as the combination of the password derived KEK with REK value entirely prevents offline
attacks and the TOE’s maximum incorrect login attempts (between 1 and 10 incorrect attempts with 6 character,
minimum, passwords) prevents exhaustive online attacks.
The TOE’s algorithm certificates represent the BoringSSL library, Kernel Cryptographic module, SCrypto library,
and Chipset hardware implementations. These implementations have been tested upon Android 6.0.1
(Marshmallow) running atop both Exynos and Qualcomm ARMv8 chipsets. The TOE’s Exynos 8890 processor
includes the Samsung Flash Memory Protector (FMP V3.0) described in AES certificates 3839, while the TOE’s
Qualcomm MSM8996 (known as the “Snapdragon 820”) includes hardware AES XTS (Inline Crypto Engine, ICE)
implementations for encryption and decryption.
FCS_HTTPS_EXT.1: The TOE includes the ability to support the HTTPS protocol (compliant with RFC 2818) so
that (mobile and system client) applications executing on the TOE can securely connect to external servers using
HTTPS. Administrators have no credentials and cannot use HTTPS or TLS to establish administrative sessions with
the TOE as the TOE does not provide any such capabilities.
FCS_IV_EXT.1: The TOE generates IVs for data storage encryption and for key storage encryption. The TOE uses
AES-XTS and AES-CBC mode for data encryption and AES-GCM for key storage.
FCS_RBG_EXT.1: The TOE provides a number of different RBGs including
1. An AES-256 CTR_DRBG provided by BoringSSL. The TOE provides mobile applications access
(through an Android Java API) to random data drawn from its AES-256 CTR_DRBG.
2. An AES-256 CTR_DRBG provided by SCrypto
3. A SHA-256 HMAC_DRBG provided by Kernel Crypto
4. A hardware SHA-256 Hash_DRBG provided by the Qualcomm AP
The TOE ensures that it initializes each RBG with sufficient entropy ultimately accumulated from a TOE-hardware-
based noise source. The TOE uses its hardware-based noise source to continuously fill /dev/random with random
data with full entropy, and in turn, the TOE draws from /dev/random to seed both of its AES-256 CTR_DRBG and
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 46 of 65
its SHA-256 HMAC_DRBG. The TOE seeds each of its AES-256 CTR_DRBGs using 384-bits of data from
/dev/random, thus ensuring at least 256-bits of entropy. Finally the TOE seeds its SHA-256 HMAC_DRBG with
440-bits of data from /dev/random, also ensuring that it contains at least 256-bits of entropy.
FCS_SRV_EXT.1: The TOE provides applications access to the cryptographic operations including encryption
(AES), hashing (SHA), signing and verification (RSA & ECDSA), key hashing (HMAC), password-based key-
derivation functions (PKBDFv2 HMAC-SHA-512), generate asymmetric keys for key establishment (RSA, DH,
and ECDH), and generate asymmetric keys for signature generation and verification (RSA, ECDSA). The TOE
provides access through the Android operating system’s Java API, through the native BoringSSL API, and through
the kernel. The vendor also developed testing applications to enable execution of the NIST algorithm testing suite in
order to verify the correctness of the algorithm implementations.
FCS_STG_EXT.1: The TOE provides users and applications running on the TOE the ability to generate, import,
and securely store symmetric and asymmetric keys through the TOE’s Android Key Store. The TOE allows a user
to import a certificate (in PKCS#12 [PFX] format) and provides applications running on the TOE an API to import a
certificate or secret key. In either case, the TOE will place the key into the user’s key store (and the TOE will
remove the PKCS#12 password-based protection if the imported key is a certificate) and doubly encrypt the
imported key with DEKs, which in turn are encrypted by a KEK derived from the user's DKEK and a KEK derived
from the REK. All user and application keys placed into the user’s keystore are secured in this fashion. Note that
while operating in CC mode, the TOE also encrypts (using ODE) the Flash filesystem in which all keystore blobs
reside (as encrypted files), providing yet another layer of encryption protection to keystore objects.
The user of the TOE can elect to delete keys from the keystore, as well as to securely wipe the entire device.
The TOE affords applications control (control over use and destruction) of keys that they create or import, and only
the user or a common application developer can explicitly authorize access, use, or destruction of one application’s
key by any other application.
Entity Can import? Can
destroy?
Allow other
app to use?
Allow other
app to destroy
User Yes Yes Yes
Administrator Yes Yes
Mobile application Yes Yes
Common application developer Yes Yes
FCS_STG_EXT.2: The TOE provides protection for all stored keys (i.e. those written to storage media for
persistent storage) chained to both the user’s password and the REK. All keys are encrypted with AES-GCM or
AES-CBC (in the case of SD card File Encryption Keys). All KEKs are 256-bit, ensuring that that the TOE encrypts
every key with another key of equal or greater strength/size.
In the case of WiFi, the TOE utilizes the 802.11-2012 KCK and KEK keys to unwrap (decrypt) the WPA2 Group
Temporal Key received from the access point. Additionally, the TOE protects persistent WiFi keys (user
certificates) by storing them in the Android Key Store.
FCS_STG_EXT.3: The key hierarchy shows AES-256 GCM is used to encrypt all KEKs and the GCM encryption
mode itself ensures integrity as authenticated decryption operations fail if the encrypted KEK becomes corrupted.
FCS_TLSC_EXT.1: The TSF supports TLS versions 1.0, 1.1, and 1.2 with client (mutual) authentication and
supports all sixteen ciphersuites (see the selections in section 5.1.2.23) for use with EAP-TLS as part of WPA2. The
TOE, by design, supports only evaluated elliptic curves (P-256, P-384, & P-521 and no others) and requires/allows
no configuration of the supported curves.
FCS_TLS_EXT.2: The TOE provides mobile applications (through its Android API) the use of TLS versions 1.0,
1.1, and 1.2 including support for all sixteen selectable ciphersuites (see the selections in section 5.1.2.24). The
TOE supports Common Name (CN) and Subject Alternative Name (SAN) (DNS and IP address) as reference
identifiers. The TOE supports client (mutual) authentication. The TOE, by design, supports only evaluated elliptic
curves (P-256, P-384, & P-521 and no others) and requires/allows no configuration of the supported curves. While
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 47 of 65
the TOE supports the use of wildcards in X.509 reference identifiers (CN and SAN), the TOE does not support
certificate pinning.
6.2 User data protection
FDP_ACF_EXT.1:
The TOE provides the following categories of system services to applications.
1. normal – A lower-risk permission that gives an application access to isolated application-level features,
with minimal risk to other applications, the system, or the user. The system automatically grants this type
of permission to a requesting application at installation, without asking for the user's explicit approval
(though the user always has the option to review these permissions before installing).
2. dangerous – A higher-risk permission that would give a requesting application access to private user data or
control over the device that can negatively impact the user. Because this type of permission introduces
potential risk, the system may not automatically grant it to the requesting application. For example, any
dangerous permissions requested by an application may be displayed to the user and require confirmation
before proceeding, or some other approach may be taken to avoid the user automatically allowing the use
of such facilities.
3. signature – A permission that the system is to grant only if the requesting application is signed with the
same certificate as the application that declared the permission. If the certificates match, the system
automatically grants the permission without notifying the user or asking for the user's explicit approval.
4. signatureOrSystem – A permission that the system is to grant only to packages in the Android system
image or that are signed with the same certificates. Please avoid using this option, as the signature
protection level should be sufficient for most needs and works regardless of exactly where applications are
installed. This permission is used for certain special situations where multiple vendors have applications
built in to a system image which need to share specific features explicitly because they are being built
together.
An example of a normal permission is the ability to vibrate the device: android.permission.VIBRATE. This
permission allows an application to make the device vibrate, and an application that does not declare this permission
would have its vibration requests ignored.
An example of a dangerous privilege would be access to location services to determine the location of the mobile
device: android.permission.ACCESS_FINE_LOCATION. The TOE controls access to Dangerous
permissions during the installation of the application. The TOE prompts the user to review the application’s
requested permissions (by displaying a description of each permission group, into which individual permissions
map, that an application requested access to). If the user approves, then the mobile device continues with the
installation of the application. Thereafter, the mobile device grants that application during execution access to the
set of permissions declared in its Manifest file.
An example of a signature permission is the android.permission.BIND_VPN_SERVICE, that an application
must declare in order to utilize the VpnService APIs of the device. Because the permission is a Signature
permission, the mobile device only grants this permission to an application that requests this permission and that has
been signed with the same developer key used to sign the application declaring the permission (in the case of the
example, the Android Framework itself).
An example of a systemOrSignature permission is the android.permission.LOCATION_HARDWARE, which
allows an application to use location features in hardware (such as the geofencing API). The device grants this
permission to requesting applications that either have been signed with the same developer key used to sign the
android application declaring the permissions or that reside in the “system” directory within Android, which for
Android 4.4 and above, are applications residing in the /system/priv-app/ directory on the read-only system
partition). Put another way, the device grants systemOrSignature permissions by Signature or by virtue of the
requesting application being part of the “system image.”
Additionally, Android includes the following flags that layer atop the base categories.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 48 of 65
1. privileged – this permission can also be granted to any applications installed as privileged apps on the
system image. Please avoid using this option, as the signature protection level should be sufficient for most
needs and works regardless of exactly where applications are installed. This permission flag is used for
certain special situations where multiple vendors have applications built in to a system image which need to
share specific features explicitly because they are being built together.
2. system – Old synonym for "privileged".
3. development – this permission can also (optionally) be granted to development applications (e.g., to allow
additional location reporting during beta testing).
4. appop – this permission is closely associated with an app op for controlling access.
5. pre23 - this permission can be automatically granted to apps that target API levels below API level 23
(Marshmallow/6.0).
6. installer - this permission can be automatically granted to system apps that install packages.
7. verifier- this permission can be automatically granted to system apps that verify packages.
8. preinstalled – this permission can be automatically granted any application pre-installed on the system
image (not just privileged apps) (the TOE does not prompt the user to approve the permission).
For older applications (those targeting Android’s pre-23 API level, i.e., API level 22 [lollipop] and below), the TOE
will prompt a user at the time of application installation whether they agree to grant the application access to the
requested services. Thereafter (each time the application is run), the TOE will grant the application access to the
services specified during install.
For newer applications (those targeting API level 23 or later), the TOE grants individual permissions at application
run-time by prompting the user for confirmation of each permissions category requested by the application (and only
granting the permission if the user chooses to grant it).
The Android 6.0 (Level 23) API, found here https://developer.android.com/about/versions/marshmallow/android-
6.0.html provides a description of the services available to mobile applications, and the below table lists those
services requiring an application to request privileges in order to utilize those permissions:
Permission ProtectionLevel
Description
android.permission.ACCESS_CACHE_FILESYSTEM signature
android.permission.ACCESS_CHECKIN_PROPERTIES signature
android.permission.ACCESS_COARSE_LOCATION dangerous
android.permission.ACCESS_CONTENT_PROVIDERS_EXTERNALLY signature
android.permission.ACCESS_IMS_CALL_SERVICE signature|system
android.permission.ACCESS_INPUT_FLINGER signature
android.permission.ACCESS_KEYGUARD_SECURE_STORAGE signature
android.permission.ACCESS_LOCATION_EXTRA_COMMANDS normal
android.permission.ACCESS_MOCK_LOCATION signature
android.permission.ACCESS_MTP signature
android.permission.ACCESS_NETWORK_CONDITIONS signature
android.permission.ACCESS_NETWORK_STATE normal
android.permission.ACCESS_NOTIFICATION_POLICY normal
android.permission.ACCESS_NOTIFICATIONS signature
android.permission.ACCESS_SURFACE_FLINGER signature
android.permission.ACCESS_VOICE_INTERACTION_SERVICE signature
android.permission.ACCESS_WIFI_STATE normal
android.permission.ACCESS_WIMAX_STATE normal
android.permission.ACCOUNT_MANAGER signature
android.permission.ALLOW_ANY_CODEC_FOR_PLAYBACK signature
android.permission.ASEC_ACCESS signature
android.permission.ASEC_CREATE signature
android.permission.ASEC_DESTROY signature
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 49 of 65
Permission ProtectionLevel
Description
android.permission.ASEC_MOUNT_UNMOUNT signature
android.permission.ASEC_RENAME signature
android.permission.BACKUP signature
android.permission.BATTERY_STATS signature
android.permission.BIND_ACCESSIBILITY_SERVICE signature
android.permission.BIND_APPWIDGET signature
android.permission.BIND_CARRIER_SERVICES signature
android.permission.BIND_CHOOSER_TARGET_SERVICE signature
android.permission.BIND_DEVICE_ADMIN signature
android.permission.BIND_DIRECTORY_SEARCH signature|system
android.permission.BIND_INCALL_SERVICE system|signature
android.permission.BIND_INPUT_METHOD signature
android.permission.BIND_INTENT_FILTER_VERIFIER signature
android.permission.BIND_KEYGUARD_APPWIDGET signature
android.permission.BIND_MIDI_DEVICE_SERVICE signature
android.permission.BIND_NFC_SERVICE signature
android.permission.BIND_NOTIFICATION_LISTENER_SERVICE signature
android.permission.BIND_PACKAGE_VERIFIER signature
android.permission.BIND_PRINT_SERVICE signature
android.permission.BIND_PRINT_SPOOLER_SERVICE signature
android.permission.BIND_REMOTE_DISPLAY signature
android.permission.BIND_REMOTEVIEWS signature
android.permission.BIND_ROUTE_PROVIDER signature
android.permission.BIND_TELECOM_CONNECTION_SERVICE system|signature
android.permission.BIND_TEXT_SERVICE signature
android.permission.BIND_VOICE_INTERACTION signature
android.permission.BIND_VPN_SERVICE signature
android.permission.BIND_WALLPAPER signature
android.permission.BLUETOOTH normal
android.permission.BLUETOOTH_ADMIN normal
android.permission.BLUETOOTH_MAP signature
android.permission.BLUETOOTH_PRIVILEGED system|signature
android.permission.BLUETOOTH_STACK signature
android.permission.BODY_SENSORS dangerous
android.permission.BROADCAST_PACKAGE_REMOVED signature
android.permission.BROADCAST_SMS signature
android.permission.BROADCAST_STICKY normal
android.permission.BROADCAST_WAP_PUSH signature
android.permission.CALL_PHONE dangerous
android.permission.CALL_PRIVILEGED signature
android.permission.CAMERA dangerous
android.permission.CAMERA_DISABLE_TRANSMIT_LED signature
android.permission.CAMERA_SEND_SYSTEM_EVENTS signature
android.permission.CAPTURE_AUDIO_HOTWORD signature
android.permission.CAPTURE_AUDIO_OUTPUT signature
android.permission.CAPTURE_SECURE_VIDEO_OUTPUT signature
android.permission.CAPTURE_VIDEO_OUTPUT signature
android.permission.CHANGE_APP_IDLE_STATE signature
android.permission.CHANGE_BACKGROUND_DATA_SETTING signature
android.permission.CHANGE_COMPONENT_ENABLED_STATE signature
android.permission.CHANGE_CONFIGURATION_checkPermission signature
android.permission.CHANGE_DEVICE_IDLE_TEMP_WHITELIST system|signature
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 50 of 65
Permission ProtectionLevel
Description
android.permission.CHANGE_NETWORK_STATE normal
android.permission.CHANGE_WIFI_MULTICAST_STATE normal
android.permission.CHANGE_WIFI_STATE normal
android.permission.CHANGE_WIMAX_STATE normal
android.permission.CLEAR_APP_CACHE signature
android.permission.CLEAR_APP_USER_DATA signature
android.permission.CONFIGURE_WIFI_DISPLAY signature
android.permission.CONFIRM_FULL_BACKUP signature
android.permission.CONNECTIVITY_INTERNAL signature
android.permission.CONTROL_KEYGUARD_checkPermission signature
android.permission.CONTROL_LOCATION_UPDATES signature
android.permission.CONTROL_WIFI_DISPLAY signature
android.permission.COPY_PROTECTED_DATA signature
android.permission.CRYPT_KEEPER signature
android.permission.DELETE_CACHE_FILES signature
android.permission.DELETE_PACKAGES signature
android.permission.DEVICE_POWER signature
android.permission.DIAGNOSTIC signature
android.permission.DISABLE_KEYGUARD normal
android.permission.DISPATCH_NFC_MESSAGE signature
android.permission.DUMP signature
android.permission.DVB_DEVICE signature
android.permission.EXPAND_STATUS_BAR normal
android.permission.FACTORY_TEST signature
android.permission.FILTER_EVENTS signature
android.permission.FLASHLIGHT normal
android.permission.FORCE_BACK signature
android.permission.FORCE_STOP_PACKAGES signature
android.permission.FREEZE_SCREEN signature
android.permission.GET_ACCOUNTS_checkPermission dangerous
android.permission.GET_ACCOUNTS_PRIVILEGED signature
android.permission.GET_APP_OPS_STATS signature
android.permission.GET_DETAILED_TASKS signature
android.permission.GET_PACKAGE_IMPORTANCE signature
android.permission.GET_PACKAGE_SIZE normal
android.permission.GET_TOP_ACTIVITY_INFO signature
android.permission.GLOBAL_SEARCH signature
android.permission.GLOBAL_SEARCH_CONTROL signature
android.permission.GRANT_REVOKE_PERMISSIONS signature
android.permission.GRANT_RUNTIME_PERMISSIONS_checkPermission signature
android.permission.HARDWARE_TEST signature
android.permission.HDMI_CEC signature
android.permission.INJECT_EVENTS signature
android.permission.INSTALL_LOCATION_PROVIDER signature|system
android.permission.INSTALL_PACKAGES signature
android.permission.INTENT_FILTER_VERIFICATION_AGENT signature
android.permission.INTERACT_ACROSS_USERS signature
android.permission.INTERACT_ACROSS_USERS_FULL signature
android.permission.INTERNAL_SYSTEM_WINDOW signature
android.permission.INTERNET normal
android.permission.INVOKE_CARRIER_SETUP signature
android.permission.KILL_BACKGROUND_PROCESSES normal
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 51 of 65
Permission ProtectionLevel
Description
android.permission.KILL_UID signature
android.permission.LOCAL_MAC_ADDRESS signature
android.permission.LOCATION_HARDWARE signature
android.permission.LOOP_RADIO signature
android.permission.MANAGE_ACTIVITY_STACKS signature
android.permission.MANAGE_APP_TOKENS signature
android.permission.MANAGE_CA_CERTIFICATES signature
android.permission.MANAGE_DEVICE_ADMINS signature
android.permission.MANAGE_DOCUMENTS signature
android.permission.MANAGE_FINGERPRINT system|signature
android.permission.MANAGE_NETWORK_POLICY signature
android.permission.MANAGE_PROFILE_AND_DEVICE_OWNERS signature
android.permission.MANAGE_USB signature
android.permission.MANAGE_USERS signature
android.permission.MANAGE_VOICE_KEYPHRASES signature
android.permission.MEDIA_CONTENT_CONTROL signature
android.permission.MODIFY_APPWIDGET_BIND_PERMISSIONS signature
android.permission.MODIFY_AUDIO_SETTINGS normal
android.permission.MODIFY_NETWORK_ACCOUNTING signature
android.permission.MODIFY_PHONE_STATE signature
android.permission.MOUNT_FORMAT_FILESYSTEMS system|signature
android.permission.MOUNT_UNMOUNT_FILESYSTEMS system|signature
android.permission.MOVE_PACKAGE signature
android.permission.NET_ADMIN signature
android.permission.NET_TUNNELING signature
android.permission.NFC normal
android.permission.NFC_TRANSACTION dangerous
android.permission.NOTIFY_PENDING_SYSTEM_UPDATE signature
android.permission.OBSERVE_GRANT_REVOKE_PERMISSIONS signature
android.permission.OEM_UNLOCK_STATE signature
android.permission.OVERRIDE_WIFI_CONFIG signature
android.permission.PACKAGE_USAGE_STATS signature|appop
android.permission.PACKAGE_VERIFICATION_AGENT signature
android.permission.PEERS_MAC_ADDRESS signature
android.permission.PERFORM_CDMA_PROVISIONING signature
android.permission.PERFORM_SIM_ACTIVATION signature
android.permission.PERSISTENT_ACTIVITY normal
android.permission.PROCESS_OUTGOING_CALLS dangerous
android.permission.QUERY_DO_NOT_ASK_CREDENTIALS_ON_BOOT signature
android.permission.READ_CALENDAR dangerous
android.permission.READ_CALL_LOG dangerous
android.permission.READ_CELL_BROADCASTS dangerous
android.permission.READ_CONTACTS dangerous
android.permission.READ_DREAM_STATE signature
android.permission.READ_EXTERNAL_STORAGE dangerous
android.permission.READ_FRAME_BUFFER signature
android.permission.READ_INPUT_STATE signature
android.permission.READ_LOGS signature
android.permission.READ_NETWORK_USAGE_HISTORY signature
android.permission.READ_PHONE_STATE dangerous
android.permission.READ_PRECISE_PHONE_STATE signature
android.permission.READ_PRIVILEGED_PHONE_STATE signature
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 52 of 65
Permission ProtectionLevel
Description
android.permission.READ_SEARCH_INDEXABLES signature
android.permission.READ_SMS dangerous
android.permission.READ_SYNC_SETTINGS normal
android.permission.READ_SYNC_STATS normal
android.permission.READ_WIFI_CREDENTIAL signature
android.permission.REAL_GET_TASKS signature
android.permission.REBOOT signature
android.permission.RECEIVE_BLUETOOTH_MAP signature
android.permission.RECEIVE_BOOT_COMPLETED normal
android.permission.RECEIVE_DATA_ACTIVITY_CHANGE signature
android.permission.RECEIVE_DIRECTED_SMS signature|system
android.permission.RECEIVE_EMERGENCY_BROADCAST signature
android.permission.RECEIVE_MMS dangerous
android.permission.RECEIVE_SMS dangerous
android.permission.RECEIVE_STK_COMMANDS system|signature
android.permission.RECEIVE_WAP_PUSH dangerous
android.permission.RECEIVE_WIFI_CREDENTIAL_CHANGE signature
android.permission.RECORD_AUDIO dangerous
android.permission.RECOVERY signature
android.permission.REMOTE_AUDIO_PLAYBACK signature
android.permission.REMOVE_TASKS signature
android.permission.REORDER_TASKS normal
android.permission.REQUEST_IGNORE_BATTERY_OPTIMIZATIONS normal
android.permission.REQUEST_INSTALL_PACKAGES normal
android.permission.RESTART_PACKAGES normal
android.permission.RETRIEVE_WINDOW_CONTENT signature|privilegd
android.permission.SCORE_NETWORKS signature|system
android.permission.sec.BLUETOOTH_SECUREMODE_INTERNAL signature|system
android.permission.sec.DLP_SERVICE_AGENT signature
android.permission.sec.ENTERPRISE_CONTAINER signature
android.permission.sec.ENTERPRISE_DEVICE_ADMIN signature
android.permission.sec.MDM_ANALYTICS signature
android.permission.sec.MDM_APN signature
android.permission.sec.MDM_APP_BACKUP signature
android.permission.sec.MDM_APP_MGMT signature
android.permission.sec.MDM_APP_PERMISSION_MGMT signature
android.permission.sec.MDM_AUDIT_LOG signature
android.permission.sec.MDM_BLUETOOTH signature
android.permission.sec.MDM_BLUETOOTH_SECUREMODE signature
android.permission.sec.MDM_BROWSER_SETTINGS signature
android.permission.sec.MDM_CALLING signature
android.permission.sec.MDM_CERTIFICATE signature
android.permission.sec.MDM_CONSTRAINED_INTERNAL signature
android.permission.sec.MDM_DATE_TIME signature
android.permission.sec.MDM_DUAL_SIM signature
android.permission.sec.MDM_EMAIL signature
android.permission.sec.MDM_ENTERPRISE_CONTAINER signature
android.permission.sec.MDM_ENTERPRISE_SSO signature
android.permission.sec.MDM_EXCHANGE signature
android.permission.sec.MDM_FIREWALL signature
android.permission.sec.MDM_GEOFENCING signature
android.permission.sec.MDM_HW_CONTROL signature
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 53 of 65
Permission ProtectionLevel
Description
android.permission.sec.MDM_INVENTORY signature
android.permission.sec.MDM_KIOSK_MODE signature
android.permission.sec.MDM_KIOSK_MODE_INTERNAL signature
android.permission.sec.MDM_LDAP signature
android.permission.sec.MDM_LDAP_INTERNAL signature
android.permission.sec.MDM_LICENSE_INTERNAL signature
android.permission.sec.MDM_LICENSE_LOG signature
android.permission.sec.MDM_LOCATION signature
android.permission.sec.MDM_LOCKSCREEN signature
android.permission.sec.MDM_MULTI_USER_MGMT signature
android.permission.sec.MDM_NOTIFY_ICCID_AVAILABLE signature
android.permission.sec.MDM_PHONE_RESTRICTION signature
android.permission.sec.MDM_REMOTE_CONTROL signature
android.permission.sec.MDM_RESTRICTION signature
android.permission.sec.MDM_ROAMING signature
android.permission.sec.MDM_SECURITY signatureOrSystem
android.permission.sec.MDM_SMARTCARD signature
android.permission.sec.MDM_UMC_INTERNAL signature
android.permission.sec.MDM_VPN signature
android.permission.sec.MDM_WIFI signature
android.permission.sec.OTP_PROVISION signature
android.permission.sec.RECEIVE_BLOCKED_SMS_MMS signature
android.permission.sec.SMIME_CERTIFICATE signature
android.permission.SEND_RESPOND_VIA_MESSAGE signature
android.permission.SEND_SMS dangerous
android.permission.SERIAL_PORT signature
android.permission.SET_ACTIVITY_WATCHER signature
android.permission.SET_ALWAYS_FINISH signature
android.permission.SET_ANIMATION_SCALE signature
android.permission.SET_DEBUG_APP signature
android.permission.SET_INPUT_CALIBRATION signature
android.permission.SET_KEYBOARD_LAYOUT signature
android.permission.SET_ORIENTATION signature
android.permission.SET_POINTER_SPEED signature
android.permission.SET_PREFERRED_APPLICATIONS signature
android.permission.SET_PROCESS_LIMIT signature
android.permission.SET_SCREEN_COMPATIBILITY signature
android.permission.SET_TIME signature
android.permission.SET_TIME_ZONE normal
android.permission.SET_WALLPAPER normal
android.permission.SET_WALLPAPER_COMPONENT signature|system
android.permission.SET_WALLPAPER_HINTS normal
android.permission.SHUTDOWN signature
android.permission.SIGNAL_PERSISTENT_PROCESSES signature
android.permission.START_ANY_ACTIVITY signature
android.permission.START_TASKS_FROM_RECENTS signature
android.permission.STATUS_BAR signature|system
android.permission.STATUS_BAR_SERVICE signature
android.permission.STOP_APP_SWITCHES signature
android.permission.SYSTEM_ALERT_WINDOW signature|preinstalled
android.permission.TALKBACK_NOTIFICATION signature|system
android.permission.TEMPORARY_ENABLE_ACCESSIBILITY signature
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 54 of 65
Permission ProtectionLevel
Description
android.permission.TRANSMIT_IR normal
android.permission.UPDATE_APP_OPS_STATS signature
android.permission.UPDATE_CONFIG signature
android.permission.UPDATE_DEVICE_STATS signature
android.permission.UPDATE_LOCK signature
android.permission.USE_FINGERPRINT normal
android.permission.USE_SIP dangerous
android.permission.VIBRATE normal
android.permission.WAKE_LOCK normal
android.permission.WRITE_APN_SETTINGS signature
android.permission.WRITE_CALENDAR dangerous
android.permission.WRITE_CALL_LOG dangerous
android.permission.WRITE_CONTACTS dangerous
android.permission.WRITE_DREAM_STATE signature
android.permission.WRITE_EXTERNAL_STORAGE dangerous
android.permission.WRITE_GSERVICES signature
android.permission.WRITE_MEDIA_STORAGE signature
android.permission.WRITE_SECURE_SETTINGS signature
android.permission.WRITE_SETTINGS signature|preinstalled
android.permission.WRITE_SYNC_SETTINGS normal
com.android.alarm.permission.SET_ALARM normal
com.android.launcher.permission.INSTALL_SHORTCUT normal
com.android.launcher.permission.UNINSTALL_SHORTCUT normal
com.android.voicemail.permission.ADD_VOICEMAIL dangerous
com.android.voicemail.permission.READ_VOICEMAIL system|signature
com.android.voicemail.permission.WRITE_VOICEMAIL system|signature
com.google.android.gms.permission.READ_VALUABLES_IMAGES signature
com.google.android.gms.permission.SHOW_TRANSACTION_RECEIPT signature
com.google.android.gms.permission.SHOW_WARM_WELCOME_TAPANDPAY_APP signature
com.kddi.android.permission.MANAGE_CPA dangerous
com.samsung.accessory.manager.permission.AUTHENTICATION_CONTROL signature|system
com.samsung.accessory.permission.TRANSPORTING_NOTIFICATION_ITEM signature
com.samsung.android.memo.READ_memo signatureOrSystem
com.samsung.android.memo.WRITE_memo signatureOrSystem
com.samsung.android.permission.ACCESS_SAFE_MODE signature
com.samsung.android.permission.CHANGE_DISPLAY_COLOR signature|system
com.samsung.android.permission.LOCK_TASK_MODE normal
com.samsung.android.permission.MANAGE_CUSTOM_STARTING_WINDOW signature|system
com.samsung.android.permission.MODIFY_THEME signature|system
com.samsung.android.permission.RECEIVE_BT_GEAR signature|system
com.samsung.android.permission.SAMSUNG_OVERLAY_COMPONENT dangerous
com.samsung.android.permission.SSRM_NOTIFICATION_PERMISSION signatureOrSystem
com.samsung.android.permisson.START_DOCK_OR_HOME signature
com.samsung.android.virtualscreen.permission.MANAGE_VIRTUAL_SCREEN signature|system
com.samsung.container.LAUNCH_INFO signature|system
com.samsung.container.OBSERVER signature|system
com.samsung.permission.BARCODE_READ signature|system
com.samsung.permission.HOME_TRIPLE_CLICK signature
com.samsung.permission.HRM_EXT signatureOrSystem
com.samsung.permission.PALM_MOTION signatureOrSystem
com.samsung.permission.SSENSOR signatureOrSystem
com.sec.android.permission.IN_APP_SOUND signature
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 55 of 65
Permission ProtectionLevel
Description
com.sec.android.permission.SMART_UNLOCK signature
com.sec.android.permission.USE_GSCALER signatureOrSystem
com.sec.android.permission.VOIP_INTERFACE signature|system
com.sec.enterprise.knox.KNOX_CONTAINER_VPN signature
com.sec.enterprise.knox.KNOX_GENERIC_VPN signature
com.sec.enterprise.knox.MDM_CONTENT_PROVIDER normal
com.sec.enterprise.knox.permission.KNOX_ACTIVATE_DEVICE_PERMISSIONS signature
com.sec.enterprise.knox.permission.KNOX_ATTESTATION signature
com.sec.enterprise.knox.permission.KNOX_DEACTIVATE_LICENSE signature
com.sec.enterprise.knox.permission.MDM_ENTERPRISE_TIMA_NOTIFICATION signature
com.sec.enterprise.mdm.permission.BROWSER_PROXY signature
com.sec.enterprise.mdm.permission.MDM_SILENT_ACTIVATION signature
com.sec.enterprise.permission.KNOX_DLP signature
com.sec.enterprise.permission.MDM_PROXY_ADMIN_INTERNAL signature
com.sec.enterprise.permission.MDM_SPDCONTROL signature
com.sec.knox.container.keyguard.ACCESS system|signature
com.sec.knox.container.peripheral.POLICY_UPDATE system|signature
com.sec.mms.permission.RECEIVE_MESSAGES_INFORMATION signatureOrSystem
com.sec.permission.BLUETOOTH_DEBUG signature
com.threelm.permission.DEVICE_INIT signature
diagandroid.app.receiveDetailedApplicationState signatureOrSystem
diagandroid.data.receivePDPContextState signatureOrSystem
diagandroid.phone.receiveDetailedCallState signatureOrSystem
nof.permission.RECEIVE_USER_MODE signature
org.simalliance.openmobileapi.BIND_TERMINAL system|signature
org.simalliance.openmobileapi.SYSTEM_TERMINAL system|signature
skplanet.permission.USE_PLAYREADY normal
Table 8 Permissions
FDP_DAR_EXT.1: The TOE provides AES-128 XTS (on TOE models using a Qualcomm MSM8996,
“Snapdragon 820” processor) or AES-256 CBC (on TOE models using an Exynos 8890 processor) encryption of all
data (which includes both user data and TSF data) stored on the TOE through On Device Encryption (ODE) of the
data partition. The TOE also has TSF data for its ODE keys, which the TOE stores outside the ODE encrypted data
partition, and the TOE also includes a read-only filesystem in which the TOE’s system executables, libraries, and
their configuration data reside. For its ODE encryption of the data partition (where the TOE stores all user data and
all application data), the TOE uses an AES-256 bit DEK with either XTS or CBC feedback mode to encrypt the
entire partition. The TOE also provides AES-256 CBC encryption of protected data stored on the external SDCard
using FEKs. The TOE encrypts each individual file stored on the SDCard, generating a unique FEK for each file.
FDP_IFC_EXT.1: The TOE includes an IPsec VPN Client that ensures that all traffic other than traffic necessary to
establish the VPN connection (802.11-2012 traffic and IKEv2) flows through the VPN. The TOE routes all packets
through the kernel’s IPsec interface (ipsec0) when the VPN is active. The kernel compares packets routed through
this interface to the SPDs configured for the VPN to determine whether or PROTECT, BYPASS, or DISCARD each
packet. The vendor designed the TOE’s VPN, when operating in CC Mode, to allow no configuration and to always
force all traffic through the VPN. The TOE ignores any IKEv2 traffic selector negotiations with the VPN GW and
will always create an SPD PROTECT rule that matches all traffic. Thus, the kernel will match all packets,
subsequently encrypt those packets, and finally forward them to the VPN Gateway.
FDP_STG_EXT.1: The TOE’s Trusted Anchor Database consists of the built-in certs (individually stored in
/system/etc/security/cacerts) which the user can disable using the TOE’s Android user interface
[Settings->Security-> Trusted Credentials]) and consists of any additional user or admin/MDM loaded certificates.
Disabled default certificates and user added certificates reside in the /data/misc/user/0/cacerts-
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 56 of 65
removed and /data/misc/user/0/cacerts-added directories respectively. The built-in ones are
protected as they are part of the TSF’s read only system partition, while the TOE protects user-loaded certificates by
storing them with appropriate permissions to prevent modification by mobile applications. The TOE also stores the
user-loaded certificates in the user’s keystore.
FDP_UPC_EXT.1: The TOE provides APIs allowing non-TSF applications (mobile applications) the ability to
establish a secure channel using TLS, HTTPS, Bluetooth BR/EDR and Bluetooth LE. Mobile applications can use
the following Android APIs for TLS, HTTPS, and Bluetooth respectively:
 javax.net.ssl.SSLContext:
o http://developer.android.com/reference/javax/net/ssl/SSLContext.html
 javax.net.ssl.HttpsURLConnection:
o http://developer.android.com/reference/javax/net/ssl/HttpsURLConnection.html
 android.bluetooth:
o http://developer.android.com/reference/android/bluetooth/package-summary.html
6.3 Identification and authentication
FIA_AFL_EXT.1(1): The TOE maintains, for each user, the number of failed logins since the last successful login,
and upon reaching the maximum number of incorrect logins, the TOE performs a full wipe of all protected data (and
in fact, wipes all users’ data). An administrator can adjust the number of failed logins from the (CC Mode) limit of
ten failed logins to a value between one and ten through an MDM. The TOE maintains the number of failed logins
across power-cycles (so for example, assuming a configured maximum retry of ten incorrect attempts, if one were to
enter five incorrect passwords and power cycle the phone, the phone would only allow five more incorrect login
attempts before wiping) by storing the number of logins remaining within its Flash filesystem. The TOE also
separately stores (in a different Flash location) the number of master user (user_0) logins attempts remaining for the
crypt-lock screen (before the TOE will wipe itself). This value defaults to a vendor specified number (typically set
to 10), and prior to the first unlock after power-up, the user data partition is encrypted and the TOE does not have
access to data stored within it.
FIA_BLT_EXT.1: The TOE requires explicit user authorization before it will pair with a remote Bluetooth device.
When pairing with another device, the TOE requires that the user either confirm that a displayed numeric passcode
matches between the two devices or that the user enter (or choose) a numeric passcode that the peer device generates
(or must enter).
FIA_BLT_EXT.2: The TOE requires explicit user authorization or user authorization before data transfer over the
link. When transferring data with another device, the TOE requires that the user must confirm authorization popup
displayed allowing data transfer (Obex Object Push) or confirm user passkey displayed numeric passcode matches
between the two devices (RFCOMM).
FIA_BLT_EXT.3: The TOE tracks active connections and actively ignores connection attempts from Bluetooth
device addresses for which the TOE already has an active connection.
FIA_PAE_EXT.1: The TOE can join WPA2-802.1X (802.11i) wireless networks requiring EAP-TLS
authentication, acting as a client/supplicant (and in that role connect to the 802.11 access point and communicate
with the 802.1X authentication server).
FIA_PMG_EXT.1: The TOE authenticates the user through a password consisting of basic Latin characters (upper
and lower case, numbers, and the special characters noted in the selection (see section 5.1.4.7). The TOE can
support a minimum password length of as few as four characters and a maximum of no more than sixteen characters.
The TOE defaults to requiring passwords to have a minimum of four characters that contain at least one letter and
one number. An MDM application can change these defaults and impose password restrictions (like quality, specify
another minimum length, the minimum number of letters, numeric characters, lower case letters, upper case letters,
symbols, and non-letters).
FIA_TRT_EXT.1: The TOE allows users to authenticate through external ports (either a USB keyboard or a
Bluetooth keyboard paired in advance of the login attempt). If not using an external keyboard, a user must
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 57 of 65
authenticate through the standard User Interface (using the TOE touchscreen). The TOE limits the number of
authentication attempts through the UI to no more than five attempts within 30 seconds (irrespective of what
keyboard the operator uses). Thus if the current [the nth
] and prior four authentication attempts have failed, and the
n-4th
attempt was less than 30 second ago, the TOE will prevent any further authentication attempts until 30 seconds
has elapsed. Note as well that the TOE will wipe itself when it reaches the maximum number of unsuccessful
authentication attempts (as described in FIA_AFL_EXT.1 above).
FIA_UAU.7: The TOE allows the user to enter the user's password from the lock screen. The TOE will, by default,
display the most recently entered character of the password briefly or until the user enters the next character in the
password, at which point the TOE obscures the character by replacing the character with a dot symbol. The user can
configure the TOE’s behavior for the normal lockscreen so that it does not briefly display the last typed character;
however, the TOE always briefly displays the last entered character for the crypt-lock screen.
FIA_UAU_EXT.1: As described before, the TOE's Key Hierarchy requires the user's password in order to derive
the PKEK1 & PKEK2 keys in order to decrypt other KEKs and DEKs. Thus, until it has the user's password, the
TOE cannot decrypt the DEK utilized by ODE to decrypt protected data.
FIA_UAU_EXT.2: The TOE, when configured to require a user password (as is the case in CC mode), allows only
those actions described in section 5.1.4.11. Beyond those actions, a user cannot perform any other actions other than
observing notifications displayed on the lock screen until after successfully authenticating.
FIA_UAU_EXT.3: The TOE requires the user to enter their password in order to unlock the TOE. Additionally the
TOE requires the user to confirm their current password when accessing the “Settings->LockScreen and Security”
menu in the TOE’s user interface. Only after entering their current user password can the user then elect to change
their password.
FIA_X509_EXT.1: The TOE checks the validity of all imported CA certificates by checking for the presence of the
basicConstraints extension and that the CA flag is set to TRUE as the TOE imports the certificate into the TOE’s
Trust Anchor Database. If the TOE detects the absence of either the extension or flag, the TOE will import the
certificate as a user public key and add it to the keystore (not the Trust Anchor Database). The TOE also checks for
the presence of the basicConstraints extension and CA flag in each CA certificate in a server’s certificate chain.
Similarly, the TOE verifies the extendedKeyUsage Server Authentication purpose during certificate validation. The
TOE’s certificate validation algorithm examines each certificate in the path (starting with the peer’s certificate) and
first checks for validity of that certificate (e.g., has the certificate expired? or is it not yet valid? whether the
certificate contains the appropriate X.509 extensions [e.g., the CA flag in the basic constraints extension for a CA
certificate, or that a server certificate contains the Server Authentication purpose in the ExtendedKeyUsagefield],
then verifies each certificate in the chain (applying the same rules as above, but also ensuring that the Issuer of each
certificate matches the Subject in the next rung “up” in the chain and that the chain ends in a self-signed certificate
present in either the TOE’s trusted anchor database or matches a specified Root CA), and finally the TOE performs
revocation checking for all certificates in the chain..
FIA_X509_EXT.2: The TOE uses X.509v3 certificates as part of EAP-TLS, TLS and IPsec authentication. The
TOE comes with a built-in set of default of Trusted Credentials (Android's set of trusted CA certificates). And while
the user cannot remove any of the built-in default CA certificates, the user can disable any of those certificates
through the user interface so that certificates issued by disabled CA’s cannot validate successfully. In addition, a
user can import a new trusted CA certificate into the Key Store or an administrator can install a new certificate
through an MDM.
The TOE does not establish TLS connections itself (beyond EAP-TLS used for WPA2 Wifi connections), but
provides a series of APIs that mobile applications can use to check the validity of a peer certificate. The mobile
application, after correctly using the specified APIs can be assured as to the validity of the peer certificate and will
not establish the trusted connection if the peer certificate cannot be verified (including validity, certification path,
and revocation [through CRL and OCSP]). During revocation checking, the TOE first attempts to determine a
certificate’s revocation status through OCSP (if the Authority Information Access, AIA, extension is present). If the
certificate lacks AIA or if the OCSP server does not respond, or if the OCSP responder returns an unknown status;
the TOE attempts to determine revocation status using CRLs, if the certificate includes a CRL Distribution Point
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 58 of 65
(CDP). If the TOE cannot establish a connection with the server acting as the CDP, the TOE will deem the server’s
certificate as invalid and not establish a TLS connection with the server.
FIA_X509_EXT.3: The TOE’s Android operating system provides applications the
java.security.cert.CertPathValidator Java API Class of methods validating certificates and
certification paths (certificate chains establishing a trust chain from a certificate to a trust anchor). This class is also
recommended to be used by third-party Android developers for certificate validation. However,
TrustedCertificateStore must be used to chain certificates to the Android System Trust Anchor Database
(anchors should be retrieved and provided to PKIXParameters used by CertPathValidator). The
available APIs may be found here:
 http://developer.android.com/reference/java/security/cert/package-summary.html
6.4 Security management
FMT_MOF.1/FMT_SMF_EXT.1: The TOE provides the management functions described in the table in section
5.1.5.2. The table includes annotations describing the roles that have access to each service and how to access the
service. The TOE enforces administrative configured restrictions by rejecting user configuration (through the UI)
when attempted.
FMT_SMF_EXT.2(1): The TOE disables CC mode, when unenrolled. The TOE also provides the capability to the
MDM Agent to wipe all protected data and to remove any installed Enterprise applications.
6.5 Protection of the TSF
FPT_AEX_EXT.1: The Linux kernel of the TOE’s Android operating system provides address space layout
randomization utilizing a non-cryptographic kernel random function to provide 8 unpredictable bits to the base
address of any user-space memory mapping. The random function, though not cryptographic, ensures that one
cannot predict the value of the bits. Similarly, the TOE also provide Kernel Address Space Layout Randomization,
to ensure that the base address of kernel-space memory mappings consist of 4 unpredictable bits.
FPT_AEX_EXT.2: The TOE's Android 6.0.1 operating system utilizes a 3.10/3.18 Linux kernel, whose memory
management unit (MMU) enforces read, write, and execute permissions on all pages of virtual memory and ensures
that write and execute permissions are not simultaneously granted on all memory (exceptions are only made for
Dalvik JIT compilation). The Android operating system (as of Android 2.3) sets the ARM eXecute Never (XN) bit
on memory pages and the TOE’s ARMv8 Application Processor’s MMU circuitry enforces the XN bits. From
Android’s documentation (https://source.android.com/devices/tech/security/index.html), Android 2.3 forward
supports “Hardware-based No eXecute (NX) to prevent code execution on the stack and heap”. Section D.5 of the
ARM v8 Architecture Reference Manual contains additional details about the MMU of ARM-based processors:
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0487a.f/index.html
FPT_AEX_EXT.3: The TOE's Android operating system provides explicit mechanisms to prevent stack buffer
overruns (enabling -fstack-protector) in addition to taking advantage of hardware-based No eXecute to prevent code
execution on the stack and heap. Samsung requires and applies these protections to all TSF executable binaries and
libraries.
FPT_AEX_EXT.4: The TOE protects itself from modification by untrusted subjects using a variety of methods.
The first protection employed by the TOE is a Secure Boot process that uses cryptographic signatures to ensure the
authenticity and integrity of the bootloader and kernels using data fused into the device processor.
The TOE’s Secure Boot process employs a series of public keys to form a chain of trust that operates as follows.
The Application Processor (AP) contains the SHA-256 hash of the Secure Boot Public Key (an RSA 2048-bit key
embedded in end of the signed bootloader image), and upon verifying the SBPK attached to the bootloader produces
the expected hash, the AP uses this public key to verify the PKCS 1.5 RSA 2048 w/ SHA-256 signature of the
bootloader image, to ensure its integrity and authenticity before transitioning execution to the bootloader. The
bootloader, in turn, contains the Image Signing Public Key (ISPK), which the bootloader will use to verify the
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 59 of 65
PKCS 1.5 RSA 2048 w/ SHA-1 signature on either kernel image (primary kernel image or recovery kernel image).
Note that when configured for Common Criteria mode, the TOE only accepts updates to the TOE firmware Over
The Air; however, when not configured for CC mode, the TOE allows updates through the bootloader’s ODIN
mode. The primary kernel includes an embedded FOTA Public Key, which the TOE uses to verify the authenticity
and integrity of Firmware Over-The-Air update signatures (which contain a PKCS 2.1 PSS RSA 2048 w/ SHA-512
signature).
The TOE protects access to the REK and derived HEK to only trusted applications1
within the TEE (TrustZone).
The TOE key manager includes a TEE module which utilizes the HEK to protect all other keys in the key hierarchy.
All TEE applications are cryptographically signed, and when invoked at runtime (at the behest of an untrusted
application), the TEE will only load the trusted application after successfully verifying its cryptographic signature.
Furthermore, SKMM_TA or device encryption library checks the integrity of the system by checking the result from
both Secure Boot/SecurityManager and from the Integrity Check Daemon before servicing any requests. Without
this TEE application, no keys within the TOE (including keys for ScreenLock, the key store, and user data) can be
successfully decrypted, and thus are useless.
The third protection is the TOE’s internal SecurityManager watchdog service. The SecurityManager manages the
CC mode of the TOE by looking for unsigned kernels or failures from other, non-cryptographic checks on system
integrity, and upon detecting of a failure in either, disables the CC mode and notifies the TEE application. The TEE
application then locks itself, again rendering all TOE keys useless.
Finally, the TOE’s Android OS provides “sandboxing” that ensures that each non-system mobile application
executes with the file permissions of a unique Linux user ID, in a different virtual memory space. This ensures that
applications cannot access each other’s memory space (it is possible for two processes to utilize shared memory, but
not directly access the memory of another application) or files and cannot access the memory space or files of
system-level applications.
FPT_BBD_EXT.1: The TOE’s hardware and software architecture ensures separation of the application processor
(AP) from the baseband or communications processor (CP). From a software perspective, the AP and CP
communicate logically through the Android Radio Interface Layer (RIL) daemon. This daemon, which executes on
the AP, coordinates all communication between the AP and CP. It makes requests of the CP and accepts the
response from the CP; however, the RIL daemon does not provide any reciprocal mechanism for the CP to make
requests of the AP. Because the mobile architecture provides only the RIL daemon interface, the CP has no method
to access the resources of the software executing on the AP.
FPT_KST_EXT.1: The TOE does not store any plaintext key material in its internal Flash; instead, the TOE
encrypts all keys before storing them. This ensures that irrespective of how the TOE powers down (e.g., a user
commands the TOE to power down, the TOE reboots itself, or battery is removed), all keys in internal Flash are
wrapped with a KEK. Please refer to section 6.1of the TSS for further information (including the KEK used)
regarding the encryption of keys stored in the internal Flash. As the TOE encrypts all keys stored in Flash, upon
boot-up, the TOE must first decrypt and utilize keys.
FPT_KST_EXT.2: The TOE utilizes a cryptographic library consisting of an implementation of BoringSSL, the
kernel crypto module, the key management module, and the following system-level executables that utilize KEKs:
dm-crypt, eCryptfs, wpa_supplicant, and the keystore.
The TOE ensures that plaintext key material does not leave by not allowing the REK to leave and by ensuring that
only authenticated entities can request utilization of the REK. Furthermore, the TOE only allows the system-level
executables access to plaintext DEK values needed for their operation. The TSF software (the system-level
executables) protects those plaintext DEK values in memory both by not providing any access to these values and by
clearing them when no longer needed (in compliance with FCS_CKM.4).
FPT_KST_EXT.3: The TOE does not provide any way to export plaintext DEKs or KEKs (including all keys
stored in the keystore) as the TOE chains all KEKs to the HEK/REK.
1
A TrustZone application is a trusted application that executes in a hardware-isolated domain.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 60 of 65
FPT_NOT_EXT.1: When the TOE encounters a self-test failure or when the TOE software integrity verification
fails, the TOE transitions to a non-operational mode. The user may attempt to power-cycle the TOE to see if the
failure condition persists, and if it does persist, the user may attempt to boot to the recovery mode/kernel to wipe
data and perform a factory reset in order to recover the device.
FPT_STM.1: The TOE requires time for the Package Manager, FOTA image verifier, TLS certificate validation,
wpa_supplicant, and key store applications. These TOE components obtain time from the TOE using system API
calls [e.g., time() or gettimeofday()]. An application cannot modify the system time as mobile applications need the
android “SET_TIME” permission to do so. Likewise, only a process with root privileges can directly modify the
system time using system-level APIs. The TOE uses the Cellular Carrier time (obtained through the Carrier’s
network time server) as a trusted source; however, the user can also manually set the time through the TOE’s user
interface.
FPT_TST_EXT.1: The TOE performs known answer power on self-tests (POST) on its cryptographic algorithms to
ensure that they are functioning correctly. The kernel itself performs known answer tests on its cryptographic
algorithms to ensure they are working correctly and the SecurityManager service invokes the self-tests of
BoringSSL at start-up to ensure that those cryptographic algorithms are working correctly. The Chipset hardware
performs a power-up self-test to ensure that its AES implementation is working as does the TEE SCrypto
cryptographic library. Should any of the tests fail, the TOE will reboot to see if that will clear the error.
Algorithm Implemented in Descripton
AES encryption/decryption BoringSSL, SCrypto,
Kernel Crypto, Chipset
hardwre
Comparison of known answer to calculated valued
ECDH key agreement BoringSSL Comparison of known answer to calculated valued
DRBG random bit generation BoringSSL, SCrypto,
Kernel Crypto
Comparison of known answer to calculated valued
ECDSA sign/verify BoringSSL, SCrypto, Sign operation followed by verify
HMAC-SHA BoringSSL, SCrypto,
Kernel Crypto
Comparison of known answer to calculated valued
RSA sign/verify BoringSSL, SCrypto, Comparison of known answer to calculated valued
SHA hashing BoringSSL, SCrypto,
Kernel Crypto
Comparison of known answer to calculated valued
Table 9 Power-up Cryptographic Algorithm Self-Tests
FPT_TST_EXT.2: The TOE ensures a secure boot process in which the TOE verifies the digital signature of the
bootloader software for the Application Processor (using a public key whose hash resides in the processor’s internal
fuses) before transferring control. The bootloader, in turn, verifies the signature of the Linux kernel (either the
primary or the recovery kernel) it loads.
The TOE also includes an Integrity Check Daemon (ICD) that provides an integrity verification result into
TrustZone. The ICD compares the SHA-256 hashes contained in an RSA PKCS#1 signed security profile with the
hashes it calculates using the specified path. The security profile includes hashes of the kernel, the ICD itself, and
specified modules and libraries. If any calculated hash does not match, then the ICD reports this to the TrustZone..
FPT_TUD_EXT.1: The TOE’s user interface provides a method to query the current version of the TOE
software/firmware (Android version, baseband version, kernel version, build number, and security software verison)
and hardware (model and version). Additionally, the TOE provides users the ability to review the currently installed
apps (including 3rd
party “built-in” applications) and their version.
FPT_TUD_EXT.2: When in CC mode, the TOE verifies all updates to the TOE software using a public key (FOTA
public key) chaining ultimately to the Secure Boot Public Key (SBPK), a hardware protected key whose SHA-256
hash resides inside the application processor (note that when not in CC mode, the TOE allows updates to the TOE
software through ODIN mode of the bootloader). After verifying an update’s FOTA signature, the TOE will then
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 61 of 65
install those updates to the TOE. The TOE will check a new image to ensure that the image is not older than the
current image, and if so, the TOE will reject the new image and not update the TOE software.
The application processing verifies the bootloader’s authenticity and integrity (thus tying the bootloader and
subsequent stages to a hardware root of trust: the SHA-256 hash of the SBPK, which cannot be reprogrammed after
the “write-enable” fuse has been blown).
The Android OS on the TOE requires that all applications bear a valid signature before Android will install the
application.
ALC_TSU_EXT: Samsung utilizes industry best practices to ensure their devices are patched to mitigate security
flaws. Samsung provides customers with a developer web portal (http://developer.samsung.com/notice/How-to-Use-
the-Forum) in which one can ask questions as well as inform Samsung of potential issues with their software (as
Samsung moderators monitor the forums), and as an Android OEM, also works with Google on reported Android
issues (http://source.android.com/source/report-bugs.html) to ensure customer devices are secure.
Samsung will create updates and patches to resolve reported issues as quickly as possible, at which point the update
is provided to the wireless carriers. The delivery time for resolving an issue depends on the severity, and can be as
rapid as a few days before the carrier handoff for high priority cases. The wireless carriers perform additional tests
to ensure the updates will not adversely impact their networks and then plan device rollouts once that testing is
complete. Carrier updates usually take at least two weeks to as much as two months (depending on the type and
severity of the update) to be rolled out to customers. However, the Carriers also release monthly Maintenance
Releases in order to address security-critical issues, and Samsung itself maintains a security blog
(http://security.samsungmobile.com) in order to disseminate information directly to the public.
Samsung communicates with the reporting party to inform them of the status of the reported issue. Further
information about updates is handled through the carrier release notes. Issues reported to Google directly are
handled through Google’s notification processes.
6.6 TOE access
FTA_SSL_EXT.1: The TOE transitions to its locked state either immediately after a User initiates a lock by
pressing the power button or after a configurable period of inactivity, and as part of that transition, the TOE will
display a lock screen to obscure the previous contents; however, the TOE’s lock screen still allows a user to perform
the functions listed in section 5.1.4.11 before authenticating. But without authenticating first, a user cannot perform
any related actions based upon these notifications (for example, they cannot respond to emails, calendar appointment
requests, or text messages) other than answering an incoming phone call.
Note that during power up, the TOE presents the user with an initial power-up ODE screen, where the user can only
make an emergency call or enter the ODE password in order to allow the TOE to decrypt the OBE key so as to be
able to access the data partition. After successfully authenticating at the power-up login screen, the TOE (when
subsequently locked) presents the user with the lock screen.
FTA_TAB.1: The TOE can be configured to display a user-specified message (maximum of 23 characters) on the
Lock screen, and additionally an administrator can also set a Lock screen message using an MDM.
FTA_WSE_EXT.1: The TOE allows an administrator to specify (through the use of an MDM) a list of wireless
networks (SSIDs) to which the user may direct the TOE to connect to. When not enrolled with an MDM, the TOE
allows the user to control to which wireless networks the TOE should connect, but does not provide an explicit list
of such networks, rather the use may scan for available wireless network (or directly enter a specific wireless
network), and then connect. Once a user has connected to a wireless network, the TOE will automatically reconnect
to that network when in range and the user has enabled the TOE’s WiFi radio.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 62 of 65
6.7 Trusted path/channels
FTP_ITC_EXT.1: The TOE provides secured (encrypted and mutually authenticated) communication channels
between itself and other trusted IT products through the use of 802.11-2012, 802.1X, and EAP-TLS, TLS and IPsec.
The TOE permits itself and applications to initiate communications via the trusted channel, and the TOE initiates
communicate via the trusted channel for connection to a wireless access point. The TOE provides access to TLS
via published APIs which are accessible to any application that needs an encrypted end-to-end trusted channel. The
TOE also meets the Protection Profile for IPsec Virtual Private Network (VPN) Clients.
6.8 KNOX Workspace Container Functionality
To differentiate the functionality provided by a KNOX Workspace container, this section enumerates the
functionality provided by the container.
FDP_DAR_EXT.2: The TOE provides mobile applications residing with a KNOX Workspace container the ability
to store sensitive data and have the TOE encrypt it accordingly. The TOE protects such sensitive data in a
segregated database not directly accessible by any mobile application, and furthermore, the TOE encrypts the data
contents within the database with keys that the TOE clears from memory when the container transitions to the lock
state. A container (and thus the applications within) can have a lock-state independent from that of the overall
mobile device (with an administrator or user defined timeout) and the user and administrator can set the container’s
lock-state to also lock when the user locks the mobile device.
FDP_ACF_EXT.1.2: The TOE, through a combination of Android’s multi-user capabilities and Security
Enhancements (SE) for Android, provides the ability to create isolated containers within the device. Within a
container a group of applications can be installed, and access to those applications is then restricted to usage solely
within the container. The container boundary restricts the ability of sharing data such that applications outside the
container cannot see, share or even copy data to those inside the container and vice versa. Exceptions to the
boundary (such as allowing a copy operation) must be authorized by the administrator via policy. Furthermore, the
container boundary policy can control access to hardware features, such as the camera or microphone, and restrict
the ability of applications within the container to access those services.
FIA_AFL_EXT.1(2): The KNOX Workspace container maintains, in Flash, the number of failed logins since the
last successful login, and upon reaching the maximum number of incorrect logins, the KNOX Workspace container
performs a full wipe of data protected by KNOX (i.e. data inside the container). An administrator can adjust the
number of failed logins from the default of ten failed logins to a value between one and one hundred through an
MDM.
FIA_UAU.7: The KNOX Workspace container allows the user to enter the user's password from the KNOX lock
screen. The KNOX Workspace container will, by default, display the most recently entered character of the
password briefly or until the user enters the next character in the password, at which point the KNOX Workspace
container obscures the character by replacing the character with a dot symbol.
FIA_UAU_EXT.3: The KNOX Workspace container requires the user to enter their password in order to unlock the
KNOX Workspace container. Additionally the KNOX Workspace container requires the user to confirm their
current password when accessing the “KNOX Settings -> KNOX unlock method” menu in the KNOX Workspace
container’s user interface. Only after entering their current user password can the user then elect to change their
password.
FMT_MOF.1/FMT_SMF_EXT.1: The KNOX Workspace container grants the user the exclusive functions
specified in the SFR (see section 5.1.5).
The control over the camera and microphone within the KNOX Workspace container only affects access to those
resources inside the container, not outside the container. If either of these is disabled outside the container then they
will not be available within the container, even if they are enabled.
FMT_SMF_EXT.2(2): The KNOX Workspace container, when a container is unenrolled (or removed), wipes all
data inside the KNOX Workspace container.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 63 of 65
FTA_SSL_EXT.1: The KNOX Workspace container transitions to its locked state either immediately after a User
initiates a lock by pressing the container lock button from the notification bar or after a configurable period of
inactivity, and as part of that transition, the KNOX Workspace container will display a lock screen to obscure the
previous contents. When the KNOX Workspace container is locked, it can still display calendar appointments and
other notifications allowed by the administrator to be shown on outside the container (in the notification area). But
without authenticating first to the KNOX Workspace container, a user cannot perform any related actions based
upon these container notifications (they cannot respond to emails, calendar appointments, or text messages).
The KNOX Workspace container timeout is independent from the TOE timeout and as such can be set to different
values.
6.9 Security Audit
FAU_GEN.1: The following table enumerates the events that the TOE audits.
Requirement Audit Event Content
FAU_GEN.1 Start-up and shutdown of the audit
functions
FAU_GEN.1 All administrative actions
FAU_GEN.1 Start-up and shutdown of the OS and kernel
FAU_GEN.1 Insertion or removal of removable media
FAU_GEN.1 Establishment of a synchronizing
connection
FAU_GEN.1 Reaching the configured audit log critical
size limit
FCS_CKM_EXT.5 Success or failure of the wipe.
FCS_CKM.1(1) Failure of key generation activity for
authentication keys.
FCS_HTTPS_EXT.1 Failure of the certificate validity check. Issuer Name and Subject Name of
certificate.
FCS_STG_EXT.1 Import or destruction of key. Identity of key. Role and identity of
requestor.
FCS_STG_EXT.3 Failure to verify integrity of stored key. Identity of key being verified.
FCS_TLSC_EXT.1 Failure to establish a EAP-TLS session. Reason for failure.
FCS_TLSC_EXT.1 Establishment/termination of an EAP-TLS
session
Non-TOE endpoint of connection
FCS_TLSC_EXT.2 Failure to establish a TLS session. Reason for failure.
FCS_TLSC_EXT.2 Failure to verify presented identifier. Presented identifier and reference
identifier.
FCS_TLSC_EXT.2 Establishment/termination of a TLS
session.
Non-TOE endpoint of connection.
FDP_DAR_EXT.2 Failure to encrypt/decrypt data.
FDP_STG_EXT.1 Addition or removal of certificate from
Trust Anchor Database.
Subject name of certificate.
FIA_UAU_EXT.3 User changes Password Authentication
Factor.
FIA_X509_EXT.1 Failure to validate X.509v3 certificate. Reason for failure of validation.
FIA_X509_EXT.2 Failure to establish connection to
determine revocation status.
FMT_SMF_EXT.1 Change of settings. Role of user that changed setting. Value
of new setting.
FMT_SMF_EXT.1 Success or failure of function. Role of user that performed function.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 64 of 65
Requirement Audit Event Content
Function performed.
Reason for failure.
FMT_SMF_EXT.1 Initiation of software update. Version of update.
FMT_SMF_EXT.1 Initiation of application installation or
update.
Name and version of application.
FPT_TST_EXT.2 Start-up of TOE. Boot Mode.
FPT_TUD_EXT.2 Success or failure of signature verification
for software updates.
FPT_TUD_EXT.2 Success or failure of signature verification
for applications.
FTA_TAB.1 Change in banner setting.
FTA_WSE_EXT.1 All attempts to connect to access points. Identity of access point.
Table 10 Audited Events
FAU_STG.1: The TOE stored audit records in a file within the filesystem accessible only to Linux processes with
system permissions (effectively the TSF itself and MDM agents possessing a valid KNOX license using the defined
APIs). These restrictions prevent the unauthorized modification or deletion of the audit records stored in the audit
files.
FAU_STG.4: The TOE pre-allocates a file system area (between 10MB and 50MB in size, depending upon
available storage on the device) by creating a /data/system/[admin_uid]_bubble/bubbleFile and directory
(/data/system/[admin_uid]) in which to archive compressed audit logs. If the TOE lacks sufficient space (at least
10MB), then the TOE returns a failure code in response to the administrator’s attempt to enable the AuditLog. Once
enabled, the TOE writes audit events into nodes until they read a given size, and then compresses and archives the
records. The TOE utilizes a circular buffer approach to handle when the accumulated, compressed audit events
exceed the allocated file system size. When the limit is reached, the TOE removes the oldest audit logs, freeing
space for new records.
Samsung Electronics Co., Ltd. Samsung Galaxy Note 7 on Android 6
(MDFPP20) Security Target Version 0.3 2016/10/03
Page 65 of 65
7. TSF Inventory
Below is a list of user-mode TSF binaries and libraries. All are built with the -fstack-protector option set. For each
binary/library, the name, path and security function is provided.
Name Path Securuty Function
app_process /system/bin APP
charon /system/bin VPN
dalvikvm /system/bin VM
gatekeeperd /system/bin Key store/Key Mgmt
keystore /system/bin Key store
mcDriverDaemon /system/bin Trustzone Daemon
qseecomd /system/bin Trustzone Daemon
secure_storage_daemon /system/bin DAR
sfotahelper /system/bin FOTA
time_daemon /system/bin Time
vold /system/bin DAR
wpa_supplicant /system/bin WLAN
icd_test /system/etc Integrity
libSecurityManagerNative.so /system/lib , /system/lib64 CCMode
libcharon.so /system/lib , /system/lib64 VPN
libcrypto.so /system/lib , /system/lib64 Crypto
libdirencryption.so /system/lib , /system/lib64 DAR
libhydra.so /system/lib , /system/lib64 VPN
libjavacrypto.so /system/lib , /system/lib64 Crypto JNI
libkeystore_binder.so /system/lib , /system/lib64 Key store
libkeyutils.so /system/lib , /system/lib64 Key store
libsec_devenc.so /system/lib , /system/lib64 DAR
libsec_ecryptfs.so /system/lib , /system/lib64 DAR
libsec_ode_keymanager.so /system/lib , /system/lib64 DAR
libsecure_storage.so /system/lib , /system/lib64 DAR
libsecure_storage_jni.so /system/lib , /system/lib64 DAR
libskmm.so /system/lib , /system/lib64 Key Mgnt
libskmm_helper.so /system/lib , /system/lib64 Key Mgnt