National Information Assurance Partnership
Common Criteria Evaluation and Validation Scheme
Validation Report
for
IOGEAR Secure KVM Switch Series (Non-CAC Models)
Report Number: CCEVS-VR-VID11224-2022
Dated: March 10, 2022
Version: 1.0
National Institute of Standards and Technology Department of Defense
Information Technology Laboratory Attn: NIAP, Suite 6982
100 Bureau Drive 9800 Savage Road
Gaithersburg, MD 20899 Fort Meade, MD 20755-6982
®
TM
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
ii
ACKNOWLEDGEMENTS
Validation Team
Patrick Mallett, PhD
Daniel Faigin
The Aerospace Corporation
Common Criteria Testing Laboratory
Leidos
Columbia, MD
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
iii
Table of Contents
1 Executive Summary...................................................................................................................1
2 Identification..............................................................................................................................5
2.1 Threats...............................................................................................................................5
2.2 Organizational Security Policies.......................................................................................6
3 Architectural Information ..........................................................................................................7
4 Assumptions.............................................................................................................................11
4.1 Clarification of Scope .....................................................................................................11
5 Security Policy.........................................................................................................................13
5.1 Security Audit.................................................................................................................13
5.2 User Data Protection.......................................................................................................13
5.3 Identification and Authentication ...................................................................................13
5.4 Security Management .....................................................................................................13
5.5 Protection of the TSF......................................................................................................14
5.6 TOE Access ....................................................................................................................14
6 Documentation.........................................................................................................................15
7 Independent Testing.................................................................................................................16
7.1 Evaluation team independent testing ..............................................................................16
7.2 Vulnerability Survey.......................................................................................................16
8 Evaluated Configuration ..........................................................................................................18
9 Results of the Evaluation .........................................................................................................19
10 Validator Comments/Recommendations .................................................................................20
11 Annexes....................................................................................................................................21
12 Security Target.........................................................................................................................22
13 Abbreviations and Acronyms ..................................................................................................23
14 Bibliography ............................................................................................................................25
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
iv
List of Figures
Figure 1 Simplified block diagram of a 2-Port KVM TOE............................................................ 9
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
v
List of Tables
Table 1: IOGEAR Secure KVM Switch Series TOE Models ........................................................ 3
Table 2: Evaluation Details............................................................................................................. 4
Table 3: Security Target Identification........................................................................................... 5
Table 4: IOGEAR Secure KVM Switch Console Interfaces and TOE Models ............................. 8
Table 5: IOGEAR Secure KVM Switch Computer Interfaces and TOE Models........................... 9
Table 6: TOE Security Assurance Requirements ......................................................................... 19
Table 7: Security Target Identification......................................................................................... 22
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
1
1 Executive Summary
This report is intended to assist the end-user of this product and any security certification agent
for that end-user to determine the suitability of this Information Technology (IT) product in their
environment. End-users should review the Security Target (ST) [6]1, (which is where specific
security claims are made) as well as this Validation Report (VR) (which describes how those
security claims were evaluated, tested, and any restrictions that may be imposed upon the
evaluated configuration) to help in that determination. Prospective users should carefully read
the Assumptions and Clarification of Scope in section 4 and the Validator Comments in section
10, where any restrictions on the evaluated configuration are highlighted.
This report documents the National Information Assurance Partnership (NIAP) assessment of the
evaluation of the IOGEAR Secure KVM Switch Series (Non-CAC Models) of peripheral sharing
devices. It presents the evaluation results, their justifications, and the conformance results. This
VR is not an endorsement of the Target of Evaluation (TOE) by any agency of the U.S.
Government and no warranty of the TOE is either expressed or implied. This VR applies only to
the specific version and configuration of the product as evaluated and as documented in the ST.
The evaluation of the IOGEAR Secure KVM Switch Series (Non-CAC Models) of peripheral
sharing devices was performed by Leidos Common Criteria Testing Laboratory (CCTL) in
Columbia, Maryland, in the United States and was completed in March 2022. The evaluation
was conducted in accordance with the requirements of the Common Criteria and Common
Methodology for IT Security Evaluation (CEM), version 3.1, revision 5 [4] and the assurance
activities specified in the following materials:
• Protection Profile for Peripheral Sharing Device, Version 4.0, 19 July 2019
(PP_PSD_V4.0) or [PSD]
o including the following optional and selection-based SFRs: FAU_GEN.1,
FDP_RIP_EXT.2, FDP_SWI_EXT.2, FIA_UAU.2, FIA_UID.2, FMT_MOF.1,
FMT_SMF.1, FMT_SMR.1, FPT_PHP.3, FPT_STM.1, and FTA_CIN_EXT.1.
• PP-Module for Analog Audio Output Devices, Version 1.0, 19 July 2019
(MOD_AO_V1.0).
• PP-Module for Keyboard/Mouse Devices, Version 1.0, 19 July 2019 (MOD_KM_V1.0)
o including the following optional and selection-based SFRs: FDP_FIL_EXT.1/KM,
FDP_RIP.1/KM, and FDP_SWI_EXT.3.
• PP-Module for Video/Display Devices, Version 1.0, 19 July 2019 (MOD_VI_V1.0)
o including the following selection-based SFRs: FDP_CDS_EXT.1,
FDP_IPC_EXT.1, FDP_SPR_EXT.1/DP(DP), FDP_SPR_EXT.1/DVI-I(D),
and FDP_SPR_EXT.1/HDMI(H).
The following NIAP Technical Decisions are applicable to the claimed Protection Profile and
Modules:
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
2
• TD0593 – Equivalency Arguments for PSD
• TD0586 – DisplayPort and HDMI Interfaces in FDP_IPC_EXT.1
• TD0585 – Update to FDP_APC_EXT.1 Audio Output Tests
• TD0584 – Update to FDP APC_EXT.1 Video Tests
• TD0583 – FPT_PHP.3 modified for PSD remote controllers
• TD0557 – Correction to Audio Filtration Specification Table in FDP_AFL_EXT.1
• TD0539 – Incorrect Selection Trigger in FTA_CIN_EXT.1 in MOD_VI_V1.0
The TOE does not fit the Combiner Use Case and so the specific assignment required by the VI
Module does not apply.
• TD0518 – Typographical Error in Dependency Table
• TD0514 – Correction to MOD_VI FDP_APC_EXT.1 Test 3 Step 6
• TD0507 – Clarification on USB Plug Type
• TD0506 – Missing Steps to Disconnect and Reconnect Display
The evaluation was consistent with NIAP Common Criteria Evaluation and Validation Scheme
(CCEVS) policies and practices as described on their web site (www.niap-ccevs.org).
The Leidos evaluation team determined that the IOGEAR Secure KVM Switch Series (Non-
CAC Models) of peripheral sharing devices is conformant to the claimed Protection Profile (PP)
and PP-Modules, and when installed, configured and operated as specified in the evaluated
guidance documentation, satisfied all of the security functional requirements stated in the ST.
The information in this VR is largely derived from the publicly available Evaluation Activities
Report (AAR) [7] and the associated proprietary test report [8] produced by the Leidos
evaluation team.
Each device in the IOGEAR Secure KVM Switch (Non-CAC Modules) series is a peripheral
sharing device that allows for securely sharing one set of peripherals between multiple
computers. A user may connect a mouse, keyboard, speaker, and one or two video displays to a
Secure KVM Switch. The user may switch the set of peripherals between connected computers.
The maximum number of connected computers is two, four, or eight depending on model. The
user can switch the peripherals between any of the connected computers while preventing
unauthorized data flows or leakage between computers.
The TOE is the following models of the IOGEAR Secure KVM Switch Series. The firmware
version for all models is v1.1.101.
Configuration 2-Port 4-Port 8-Port
DisplayPort
Single Head GCS1412TAA4 GCS1414TAA4 GCS1418TAA4
Dual Head GCS1422TAA4 GCS1424TAA4 GCS1428TAA4
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
3
HDMI
Single Head GCS1312TAA4 GCS1314TAA4 N/A
Dual Head GCS1322TAA4 GCS1324TAA4 N/A
DVI
Single Head GCS1212TAA4 GCS1214TAA4 GCS1218TAA4
Dual Head GCS1222TAA4 GCS1224TAA4 GCS1228TAA4
Table 1: IOGEAR Secure KVM Switch Series TOE Models
The TOE includes a wired remote controller: Remote Port Selector (RPS) that is available to
customers as an additional purchase. This device has the same firmware version as the models
above.
In Table 1, DisplayPort configurations support DisplayPort monitors, HDMI configurations
support HDMI monitors, and DVI configurations support DVI monitors. All TOE devices
support USB keyboards and mice.
The validation team monitored the activities of the evaluation team, examined evaluation
evidence, provided guidance on technical issues and evaluation processes, and reviewed the
evaluation results produced by the evaluation team. The validation team found that the
evaluation results showed that all assurance activities specified in the claimed PP had been
completed successfully and that the product satisfied all of the security functional and assurance
requirements as stated in the ST.
Therefore, the validation team concludes that the testing laboratory’s findings are accurate, the
conclusions justified, and the conformance results are correct. The conclusions of the testing
laboratory in the evaluation technical report are consistent with the evidence produced.
The products, when configured as specified in the guidance documentation, satisfy all of the
security functional requirements stated in the IOGEAR Secure KVM Switch Security Target.
Item Identifier
Evaluated Product IOGEAR Secure KVM Switches Series devices identified in
Table 1
Sponsor & Developer IOGEAR
15365 Barranca Pkwy,
Irvine, CA 92618
CCTL Leidos
Common Criteria Testing Laboratory
6841 Benjamin Franklin Drive
Columbia, MD 21046
Completion Date March 2022
CC Common Criteria for Information Technology Security
Evaluation, Version 3.1, Revision 5, April 2017
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
4
Item Identifier
Interpretations There were no applicable interpretations used for this evaluation.
CEM Common Methodology for Information Technology Security
Evaluation: Version 3.1, Revision 5, April 2017
PP Protection Profile for Peripheral Sharing Device, Version 4.0
Disclaimer The information contained in this Validation Report is not an
endorsement of the IOGEAR Secure KVM Switch Series by any
agency of the U.S. Government and no warranty of the IOGEAR
Secure KVM Switch Series is either expressed or implied.
Evaluation Personnel Gregory Beaver
Justin Fisher
Allen Sant
Sindhu Veerabhadru
Madhav Nakar
Validation Personnel Patrick Mallet, Lead Validator
Daniel Faigin, Senior Validator
Table 2: Evaluation Details
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
5
2 Identification
The CCEVS is a joint National Security Agency (NSA) and National Institute of Standards and
Technology (NIST) effort to establish commercial facilities to perform trusted product
evaluations. Under this program, security evaluations are conducted by commercial testing
laboratories called Common Criteria Testing Laboratories (CCTLs) in accordance with National
Voluntary Laboratory Assessment Program (NVLAP) accreditation.
The NIAP Validation Body assigns validators to monitor the CCTLs to ensure quality and
consistency across evaluations. Developers of information technology products desiring a
security evaluation contract with a CCTL and pay a fee for their product’s evaluation. Upon
successful completion of the evaluation, the product is added to NIAP’s Product Compliant List
(PCL) (https://www.niap-ccevs.org/Product/).
The following table identifies the evaluated Security Target and TOE.
Name Description
ST Title IOGEAR Secure KVM Switch Series (Non-CAC Models) Security Target
ST Version v1.1
Publication Date March 8, 2022
Vendor and ST Author IOGEAR
TOE Reference IOGEAR Secure KVM Switch Series identified in Table 1
TOE Software Version Firmware version v1.1.101
Keywords KVM Switch, Peripheral Sharing Device
Table 3: Security Target Identification
2.1 Threats
The ST identifies the following threats that the TOE and its operational environment are intended
to counter the following threats.
• A connection via the PSD between one or more computers may allow unauthorized data
flow through the PSD or its connected peripherals.
• A connection via the PSD between one or more computers may allow unauthorized data
flow through bit‐by‐bit signaling.
• A PSD may leak (partial, residual, or echo) user data between the intended connected
computer and another unintended connected computer.
• A PSD may connect the user to a computer other than the one to which the user intended
to connect.
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
6
• The use of an unauthorized peripheral device with a specific PSD peripheral port may
allow unauthorized data flows between connected devices or enable an attack on the PSD
or its connected computers.
• An attached device (computer or peripheral) with malware, or otherwise under the
control of a malicious user, could modify or overwrite code or data stored in the PSD’s
volatile or non‐volatile memory to allow unauthorized information flows.
• A malicious user or human agent could physically modify the PSD to allow unauthorized
information flows.
• A malicious human agent could replace the PSD during shipping, storage, or use with an
alternate device that does not enforce the PSD security policies.
• Detectable failure of a PSD may cause an unauthorized information flow or weakening of
PSD security functions.
• A malicious agent could use an unauthorized peripheral device such as a microphone, con
nected to the TOE audio out peripheral device interface to eavesdrop or transfer data
across an air‐gap through audio signaling.
• A malicious agent could repurpose an authorized audio output peripheral device by conve
rting it to a low-gain microphone to eavesdrop on the surrounding audio or transfer data
across an air‐gap through audio signaling.
2.2 Organizational Security Policies
There are no Organizational Security Policies for the Protection Profile for Peripheral Sharing
Device [5].
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
7
3 Architectural Information
The IOGEAR Secure KVM Switch (Non-CAC Models) series are keyboard, video, mouse
(KVM) switches with the following characteristics:
• 2/4/8 port USB DisplayPort single and dual display for DisplayPort (6 devices)
• 2/4 port USB HDMI single and dual display for HDMI (4 devices)
• 2/4/8 port USB DVI single and dual display for DVI (6 devices).
The Secure KVM Switch products allow for the connection of a mouse, keyboard, speaker, and
one or two video displays (depending on specific device type) to the Secure KVM Switch, which
is then connected to 2, up to 4, or up to 8 separate computers (again depending on specific device
type). The user can then switch the connected peripherals between any of the connected
computers using a push button on the front of the device or on the RPS. The selected device is
always identifiable by a bright orange LED associated with the applicable selection button.
To interface with connected computers, the Secure KVM Switch products support analog audio
output and USB connections for the keyboard and mouse. Depending on model, they support
DisplayPort, DVI-I, or HDMI for the computer video display interface. The switched peripherals
on the console side are analog audio output, USB keyboard and mouse, and DisplayPort, HDMI
or DVI-I video output (depending on model).
The Secure KVM Switch products supporting DisplayPort convert the DisplayPort video signal
to HDMI. The HDMI signal inside the KVM will be converted again to DisplayPort signal for
output to the connected video display(s) and the AUX channel is monitored and converted to
EDID. The Secure KVM Switch products also support audio output connections from the
computers to a connected audio output device. Only speaker connections are supported and the
use of an analog microphone or line-in audio device is prohibited. The tables below identify the
interfaces of the Secure KVM console and computer ports according to model number.
Model No.
Console Video Output
Interface
Console
Keyboard
Console
Mouse
Console
Audio output
DisplayPor
t
HDMI DVI-I USB 1.1/2.0 USB 1.1/2.0
3.5mm
Analog Audio
output
(Speaker)
GCS1412TAA4 • • • •
GCS1422TAA4 • • • •
GCS1312TAA4 • • • •
GCS1322TAA4 • • • •
GCS1212TAA4 • • • •
GCS1222TAA4 • • • •
GCS1414TAA4 • • • •
GCS1424TAA4 • • • •
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
8
Model No.
Console Video Output
Interface
Console
Keyboard
Console
Mouse
Console
Audio output
DisplayPor
t
HDMI DVI-I USB 1.1/2.0 USB 1.1/2.0
3.5mm
Analog Audio
output
(Speaker)
GCS1314TAA4 • • • •
GCS1324TAA4 • • • •
GCS1214TAA4 • • • •
GCS1224TAA4 • • • •
GCS1418TAA4 • • • •
GCS1428TAA4 • • • •
GCS1218TAA4 • • • •
GCS1228TAA4 • • • •
Table 4: IOGEAR Secure KVM Switch Console Interfaces and TOE Models
Model No.
Computer Video Input
Interface
Computer
Keyboard / Mouse
Computer
Audio Input
DisplayPort HDMI DVI-I
USB
1.1/2.0
3.5mm Analog
Audio Input
(Speaker)
GCS1412TAA4 • • •
GCS1422TAA4 • • •
GCS1312TAA4 • • •
GCS1322TAA4 • • •
GCS1212TAA4 • • •
GCS1222TAA4 • • •
GCS1414TAA4 • • •
GCS1424TAA4 • • •
GCS1314TAA4 • • •
GCS1324TAA4 • • •
GCS1214TAA4 • • •
GCS1224TAA4 • • •
GCS1418TAA4 • • •
GCS1428TAA4 • • •
GCS1218TAA4 • • •
GCS1228TAA4 • • •
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
9
Table 5: IOGEAR Secure KVM Switch Computer Interfaces and TOE Models
The IOGEAR Secure KVM products implement a secure isolation design for all models to share
a single set of peripheral components. Each peripheral has its own dedicated data path. USB
keyboard and mouse peripherals are filtered and emulated. DisplayPort video from the selected
computer is converted internally to HDMI, then back to DisplayPort for communication with the
connected video display and the AUX channel is monitored and converted to EDID.
The Secure KVM Switch products are designed to enforce the allowed and disallowed data flows
between user peripheral devices and connected computers as specified in [PSD]. Data leakage is
prevented across the TOE to avoid compromise of the user's information. The Secure KVM
Switch products automatically clear the internal TOE keyboard and mouse buffers.
The following figure shows the data path design using a 2-Port KVM as an example.
Figure 1 Simplified block diagram of a 2-Port KVM TOE
The data flow of USB keyboard/mouse is controlled by the host controller for console HID
keyboard and pointing devices. Details of the data flow architecture are provided in the
proprietary Secure KVM Isolation Document. All keyboard and mouse connections are filtered
first, and only authorized devices will be allowed. The TOE emulates data from authorized USB
keyboard and mouse to USB data for computer sources.
The TOEs proprietary design ensures there is no possibility of data leakage from a user’s
peripheral output device to the input device; ensures that no unauthorized data flows from the
monitor to a connected computer; and unidirectional buffers ensure that the audio data can travel
only from the selected computer to the audio device. There is no possibility of data leakage
between computers or from a peripheral device connected to a console port to a non-selected
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
10
computer. Each connected computer has its own independent Device Controller, power circuit,
and EEPROM. Additionally, keyboard and mouse are always switched together.
All Secure KVM Switch components including the RPS, feature hardware security mechanisms
including tamper-evident labels, always active chassis-intrusion detection, and tamper-proof
hardware construction, while software security includes restricted USB connectivity (non-
Human Interface Devices (HIDs) are ignored when switching), an isolated channel per port that
makes it impossible for data to be communicated between computers, and automatic clearing of
the keyboard and mouse buffer.
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
11
4 Assumptions
The ST identifies the following assumptions about the use of the product:
• Computers and peripheral devices connected to the PSD are not TEMPEST approved.
• The environment provides physical security commensurate with the value of the TOE and
the data it processes and contains.
• The environment includes no wireless peripheral devices.
• PSD Administrators and users are trusted to follow and apply all guidance in a trusted
manner.
• Personnel configuring the PSD and its operational environment follow the applicable
security configuration guidance.
• All PSD users are allowed to interact with all connected computers. It is not the role of
the PSD to prevent or otherwise control user access to connected computers. Computers
or their connected network shall have the required means to authenticate the user and to
control access to their various resources.
• Users are trained not to connect a microphone to the TOE audio output interface.
• The TSF may or may not isolate the ground of the keyboard and mouse computer
interfaces (the USB ground). The Operational Environment is assumed not to support
TEMPEST red‐black ground isolation.
• The computers connected to the TOE are not equipped with special analog data collection
cards or peripherals such as analog to digital interface, high performance audio interface,
digital signal processing function, or analog video capture function.
4.1 Clarification of Scope
All evaluations (and all products) have limitations, as well as potential misconceptions that need
clarification. This text covers some of the more important limitations and clarifications of this
evaluation. Note that:
1. As with any evaluation, this evaluation only shows that the evaluated configuration meets
the security claims made, with a certain level of assurance (the assurance activities
specified in the claimed PPs and performed by the evaluation team).
2. This evaluation covers only the specific hardware products, and firmware versions
identified in this document, and not any earlier or later versions released or in process.
3. The evaluation of security functionality of the product was limited to the functionality
specified in the claimed PPs. Any additional security related functional capabilities of the
product were not covered by this evaluation. Any additional non-security related
functional capabilities of the product, even those described in the ST, were not covered
by this evaluation.
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
12
4. This evaluation did not specifically search for, nor attempt to exploit, vulnerabilities that
were not “obvious” or vulnerabilities to objectives not claimed in the ST. The CEM [4]
defines an “obvious” vulnerability as one that is easily exploited with a minimum of
understanding of the TOE, technical sophistication, and resources.
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
13
5 Security Policy
IOGEAR Secure KVM Switch series devices enforce the following TOE security functional
policies as specified in the ST.
5.1 Security Audit
The TOE generates audit records for the authorized administrator actions. Each audit record
records a standard set of information such as date and time of the event, type of event, and the
outcome (success or failure) of the event.
5.2 User Data Protection
The TOE controls and isolates information flowing between the peripheral device interfaces and
a computer interface. The peripheral devices supported include USB keyboard; USB mouse;
audio output; and (depending on device type) DisplayPort, DVI-I, or HDMI video. Some TOE
models accept DisplayPort signals at the computer interface and internally convert the signals to
HDMI signals and then convert back to DisplayPort for output to the console interface.
The TOE authorizes peripheral device connections with the TOE console ports based on the
peripheral device type.
The TOE ensures that any previous information content of a resource is made unavailable upon
the deallocation of the resource from a TOE computer interface immediately after the TOE
switches to another selected computer and on start-up of the TOE.
The TOE provides a Reset to Factory Default function allowing authenticated authorized
Administrators to remove all settings previously configured by the Administrator (such as HID
device blacklist). Once the Reset to Factory Default function has been completed, the Secure
KVM will terminate the Administrator Logon mode, purge keyboard/mouse buffer, and power
cycle the Secure KVM automatically.
5.3 Identification and Authentication
The TOE provides an identification and authentication function for the administrative user to
perform administrative functions such as configuring the keyboard/mouse device filtering
blacklist. The authorized administrator must logon by providing a valid password.
5.4 Security Management
The management functions are restricted to the authorized administrator and allow the TOE to be
configured to reject specific USB keyboard/mouse devices using CDF blacklist parameters.
Additionally, the TOE provides security management functions to Reset to Factory Default and
to change the administrator password.
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
14
5.5 Protection of the TSF
The TOE runs a suite of self-tests during initial startup and after activating the reset button that
includes a test of the basic TOE hardware and firmware integrity; a test of the basic computer-to-
computer isolation; and a test of critical security functions (i.e., user control and anti-tampering).
The TOE provides users with the capability to verify the integrity of the TSF and the TSF
functionality.
The TOE resists physical attacks on the main TOE enclosure as well as the RPS enclosure for the
purpose of gaining access to the internal components or to damage the anti-tampering battery by
becoming permanently disabled. The TOE preserves a secure state by disabling the TOE when
there is a failure of the power on self-test, or a failure of the anti-tampering function.
The TOE provides unambiguous detection of physical tampering that might compromise the
TSF. The TSF provides the capability to determine whether physical tampering with the TSF's
devices or TSF's elements has occurred.
5.6 TOE Access
The TOE displays a continuous visual indication of the computer to which the user is currently
connected, including on power up, and on reset.
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
15
6 Documentation
The guidance documentation examined during the course of the evaluation and delivered with
the TOE is as follows:
• IOGEAR 2/4/8-Port USB DVI/HDMI/DisplayPort Single/Dual View Secure KVM
Switch Administrator’s Guide, Version 1.03, 2021-5-5
• IOGEAR Single/Dual View Secure KVM Switch User Manual 2/4/8-Port USB
DVI/HDMI/DisplayPort, Version 1.03, 2021-5-5
• IOGEAR 2/4/8-Port USB DVI/HDMI/DisplayPort Single/Dual View Secure KVM
Switch Admin Log Audit Code, Version 1.03, 2021-5-5
TOE Documentation:
PP4.0 Secure KVM Isolation Document, Version 1.1 (Proprietary)
o Note: The PP4.0 Secure KVM Isolation Document is proprietary as permitted by PSD
4.0 Annex D.1 Isolation Document and Assessment.
The isolation document supplements the security target Section 6 TOE Summary Specification in
order to demonstrate the TOE provides isolation between connected computers. In particular, the
isolation document describes how the TOE mitigates the risk of each unauthorized data flow
listed in PSD 4.0 Annex D and Evaluation Activities specified in the PP v4.0 and modules.
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
16
7 Independent Testing
7.1 Evaluation team independent testing
This section describes the testing efforts of the evaluation team. It is derived from information
contained in the following proprietary document:
• IOGEAR PSD PP 4.0 Common Criteria Test Report and Procedures Version 1.2, March
8, 2022 [8]
A non-proprietary summary of the test configuration, test tools, and tests performed may be
found in:
• Assurance Activities Report for IOGEAR Secure KVM Switch Series (Non-CAC
Models), Version 1.2, March 8, 2022 [7]
The purpose of the testing activity was to confirm the TOE behaves in accordance with the TOE
security functional requirements as specified in the ST for a product claiming conformance to
Protection Profile for Peripheral Sharing Device [5].
The evaluation team devised a Test Plan based on the Testing Assurance Activities specified in
Protection Profile for Peripheral Sharing Device [5]. The Test Plan described how each test
activity was to be instantiated within the TOE test environment. The evaluation team executed
the tests specified in the Test Plan and documented the results in the team test report listed
above.
Independent testing took place at the Leidos facility in Columbia, Maryland from August 29,
2021, to March 8, 2022.
The evaluators received the TOE in the form that normal customers would receive it, installed
and configured the TOE in accordance with the provided guidance, and exercised the Team Test
Plan on equipment configured in the testing laboratory.
Given the complete set of test results from the test procedures exercised by the evaluators, the
testing requirements for Protection Profile for Peripheral Sharing Device [5] were fulfilled.
7.2 Vulnerability Survey
A search of public domain sources for potential vulnerabilities in the TOE did not reveal any
known vulnerabilities. The database searched was National Vulnerability Database
(https://nvd.nist.gov/). The Table below lists the search terms and the type of search. The final
search was conducted on March 8, 2022.
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
17
Table Searches with Result Summary
Search Term Search Type Rationale CVEs
Dup
CVEs
TOE
aten Advanced: Vendor Comparable vendor 5 0 No residual vulnerability
belkin Advanced: Vendor Comparable vendor 53 0 No residual vulnerability
black box Advanced: Vendor Comparable vendor 0 0 No residual vulnerability
blackbox Advanced: Vendor Comparable vendor 4 0 No residual vulnerability
iogear Advanced: Vendor TOE vendor 0 0 No residual vulnerability
ipgard Advanced: Vendor Comparable vendor 0 0 No residual vulnerability
kvm Basic: Keyword General type 174 10 No residual vulnerability
kvm switch Basic: Keyword TOE type 12 7 No residual vulnerability
peripheral switch Basic: Keyword TOE type 0 0 No residual vulnerability
raritan Advanced: Vendor Comparable vendor 5 0 No residual vulnerability
smartavi Advanced: Vendor Comparable vendor 0 0 No residual vulnerability
tripplite Advanced: Vendor Comparable vendor 2 0 No residual vulnerability
sekuryx Advanced: Vendor Comparable vendor 0 0 No residual vulnerability
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
18
8 Evaluated Configuration
The evaluated version of the TOE consists of the IOGEAR Secure KVM Switch series devices
identified in Table 1.
The TOE must be deployed as described in section 4 Assumptions of this document and be
configured in accordance with the documentation identified in Section 6.
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
19
9 Results of the Evaluation
The evaluation was conducted based upon the assurance activities specified in Protection Profile
for Peripheral Sharing Device [5] in conjunction with version 3.1 revision 5 of the CC and the
CEM ([1], [2], [3] and [4]). A verdict for an assurance component is determined by the resulting
verdicts assigned to the corresponding evaluator action elements.
The validation team’s assessment of the evidence provided by the evaluation team is that the
evidence demonstrates the evaluation team performed the assurance activities in the claimed PPs,
and correctly verified that the product meets the claims in the ST.
The details of the evaluation are recorded in the Evaluation Technical Report (ETR) [9], which is
controlled by the Leidos CCTL. The security assurance requirements are listed in the following
table.
Table 6: TOE Security Assurance Requirements
Assurance Component ID Assurance Component Name
ADV_FSP.1 Basic function specification
AGD_OPE.1 Operational user guidance
AGD_PRE.1 Preparative procedures
ALC_CMC.1 Labeling of the TOE
ALC_CMS.1 TOE CM coverage
ATE_IND.1 Independent testing – conformance
AVA_VAN.1 Vulnerability survey
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
20
10 Validator Comments/Recommendations
NIAP established a Peripheral Sharing Device Technical Rapid Response Team (PSD-TRRT) to
address questions and concerns related to evaluations claiming conformance to Protection
Profile for Peripheral Sharing Device. A Technical Decision is an issue resolution statement that
clarifies or interprets protection profile requirements and assurance activities
The following NIAP Technical Decisions are applicable to the claimed Protection Profile and
Modules:
• TD0593 – Equivalency Arguments for PSD
• TD0586 – DisplayPort and HDMI Interfaces in FDP_IPC_EXT.1
• TD0585 – Update to FDP_APC_EXT.1 Audio Output Tests
• TD0584 – Update to FDP APC_EXT.1 Video Tests
• TD0583 – FPT_PHP.3 modified for PSD remote controllers
• TD0557 – Correction to Audio Filtration Specification Table in FDP_AFL_EXT.1
• TD0539 – Incorrect Selection Trigger in FTA_CIN_EXT.1 in MOD_VI_V1.0
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
21
11 Annexes
Not applicable.
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
22
12 Security Target
Table 7: Security Target Identification
Name Description
ST Title IOGEAR Secure KVM Switch Series (Non-CAC)
Models
ST Version v1.1
Publication Date March 8, 2022
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
23
13 Abbreviations and Acronyms
AAR Assurance Activity Report
AUX Auxiliary (Channel)
CAC Common Access Card
CC Common Criteria
CCEVS Common Criteria Evaluation and Validation Scheme
CCTL Common Criteria Test Lab
CDF Configurable Device Filtration
CEM Common Evaluation Methodology
DP DisplayPort
DVI Digital Visual Interface
EEPROM Electrically Erasable Programmable Read-Only Memory
ETR Evaluation Technical Report
HDMI High Definition Multimedia Interface
HID Human Interface Device
IT Information Technology
KVM Keyboard, Video and Mouse
LED Light-Emitting Diode
NIAP National Information Assurance Partnership
NIST National Institute of Standards and Technology
NSA National Security Agency
NVLAP National Voluntary Laboratory Assessment Program
PC Personal Computer
PCL Product Compliant List
PP Protection Profile
PSS Peripheral Sharing Switch
ST Security Target
TOE Target of Evaluation
TSF TOE Security Functions
USB Universal Serial Bus
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
24
VR Validation Report
VALIDATION REPORT
IOGEAR Secure KVM Switch Series (Non-CAC Models)
25
14 Bibliography
The Validation Team used the following documents to produce this Validation Report:
[1] Common Criteria for Information Technology Security Evaluation Part 1:
Introduction, Version 3.1, Revision 5, April 2017.
[2] Common Criteria for Information Technology Security Evaluation Part 2: Security
Functional Requirements, Version 3.1 Revision 5, April 2017.
[3] Common Criteria for Information Technology Security Evaluation Part 3: Security
Assurance Components, Version 3.1 Revision 5, April 2017.
[4] Common Methodology for Information Technology Security Evaluation, Evaluation
Methodology, Version 3.1, Revision 5, April 2017.
[5] Protection Profile for Peripheral Sharing Switch (PSS), Version 4.0, 19 July 2019
(PP_PSD_V4.0) or [PSD]
[6] IOGEAR Secure KVM Switch Series (Non-CAC Models) Security Target, version
1.1, March 8, 2022
[7] Assurance Activities Report for IOGEAR Secure KVM Switch Series (Non-CAC
Models), Version 1.2, March 8, 2022
[8] IOGEAR PSD PP 4.0 Common Criteria Test Report and Procedures, Version 1.2,
March 8, 2022
[9] Evaluation Technical Report for IOGEAR Secure KVM Switch (Non-CAC Models),
Version 1.1. March 8, 2022
[10] PP-Module for Analog Audio Output Devices, Version 1.0, 19 July 2019
(MOD_AO_V1.0).
[11] PP-Module for Keyboard/Mouse Devices, Version 1.0, 19 July 2019
(MOD_KM_V1.0)
[12] PP-Module for Video/Display Devices, Version 1.0, 19 July 2019 (MOD_VI_V1.0)