PREMIER MINISTRE
Secretariat General for National Defence
French Network and Information Security Agency
Certification Report ANSSI-CC-2009/48
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components
Paris, 19 November 2009
Courtesy Translation
Certification report ANSSI-CC-2009/48
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components
Page 2 out 17 CER/F/07.5
Warning
This report is designed to provide sponsors with a document enabling them to assess the
security level of a product under the conditions of use and operation defined in this report for
the evaluated version. It is also designed to provide the potential purchaser of the product with
the conditions under which he may operate or use the product so as to meet the conditions of
use for which the product has been evaluated and certified; that is why this certification report
must be read alongside the evaluated user and administration guidance, as well as with the
product security target, which presents threats, environmental assumptions and the supposed
conditions of use so that the user can judge for himself whether the product meets his needs in
terms of security objectives.
Certification does not, however, constitute a recommendation product from ANSSI (French
Network and Information Security Agency), and does not guarantee that the certified product
is totally free of all exploitable vulnerabilities.
Any correspondence about this report has to be addressed to:
Secrétariat Général de la Défense Nationale
Agence nationale de la sécurité des systèmes d'information
Centre de certification
51, boulevard de la Tour Maubourg
75700 PARIS cedex 07 SP
France
certification.anssi@ssi.gouv.fr
Reproduction of this document without any change or cut is authorised.
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components Certification report ANSSI-CC-2009/48
Page 3 out 17
Certification report reference
ANSSI-CC-2009/36
Product name
ID-One Cosmo V7.0-n SmartCard
in configuration Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components
Product reference
JavaCard Platform version for any configuration: 7.0-n
Optional Code r4.0 Generic version for any configuration: 069774
Protection profile conformity
[PP/0304]
Java Card System - Standard 2.1.1 Configuration Protection Profile – version 1.0b, August 2003
Certified by ANSSI
Evaluation criteria and version
Common Criteria version 3.1
Evaluation level
EAL 5 augmented
ADV_IMP.2, ALC_DVS.2, AVA_VAN.5
Developer(s)
Oberthur Technologies1
50 quai Michelet
92300 Levallois-Perret, France
NXP Semiconductors GmbH1
Stresemannallee 101
D-22502 Hamburg, Germany
Sponsor
Oberthur Technologies
50 quai Michelet, 92300 Levallois-Perret, France
Evaluation facility
THALES - CEACI (T3S – CNES)
18 avenue Edouard Belin, BPI1414, 31401 Toulouse Cedex 9, France
Phone: +33 (0)5 62 88 28 01 or 18, email : nathalie.feyt@thalesgroup.com
Recognition arrangements
CCRA
The product is recognised at EAL4 level.
SOG-IS
1
: main site.
Certification report ANSSI-CC-2009/48
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components
Page 4 out 17 CER/F/07.5
Introduction
The Certification
Security certification for information technology products and systems is governed by decree
number 2002-535 dated April, 18th 2002, and published in the "Journal Officiel de la
République Française". This decree stipulates that:
• The French Network and Information Security Agency draws up certification
reports. These reports indicate the features of the proposed security targets. They may
include any warnings that the authors feel the need to mention for security reasons.
They may or may not be transmitted to third parties or made public, as the sponsors
desire (article 7).
• The certificates issued by the Prime Minister certify that the copies of the products or
systems submitted for evaluation fulfil the specified security features. They also
certify that the evaluations have been carried out in compliance with applicable rules
and standards, with the required degrees of skill and impartiality (article 8).
The procedures are available on the Internet site www.ssi.gouv.fr.
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components Certification report ANSSI-CC-2009/48
Page 5 out 17
Content
1. THE PRODUCT........................................................................................................................... 3
1.1. PRESENTATION OF THE PRODUCT........................................................................................... 3
1.2. EVALUATED PRODUCT DESCRIPTION ..................................................................................... 3
1.2.1. Product identification.................................................................................................... 3
1.2.2. Security services............................................................................................................ 3
1.2.3. Architecture................................................................................................................... 3
1.2.4. Life cycle ....................................................................................................................... 3
1.2.5. Evaluated configuration................................................................................................ 3
2. THE EVALUATION.................................................................................................................... 3
2.1. EVALUATION REFERENTIAL ................................................................................................... 3
2.2. EVALUATION WORK ............................................................................................................... 3
2.3. CRYPTOGRAPHIC MECHANISMS ROBUSTNESS ANALYSIS REGARDING TO ANSSI’S
TECHNICAL REFERENTIALS ................................................................................................................. 3
3. CERTIFICATION........................................................................................................................ 3
3.1. CONCLUSION.......................................................................................................................... 3
3.2. RESTRICTIONS........................................................................................................................ 3
3.3. RECOGNITION OF THE CERTIFICATE....................................................................................... 3
3.3.1. European recognition (SOG-IS).................................................................................... 3
3.3.2. International common criteria recognition (CCRA)..................................................... 3
ANNEX 1. EVALUATION LEVEL OF THE PRODUCT............................................................ 3
ANNEX 2. EVALUATED PRODUCT REFERENCES ................................................................ 3
ANNEX 3. CERTIFICATION REFERENCES ............................................................................. 3
Certification report ANSSI-CC-2009/48
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components
Page 6 out 17 CER/F/07.5
1. The product
1.1. Presentation of the product
The evaluated product is ID-One Cosmo V7.0-n smartcard, a Java Card open platform,
developed par Oberthur Technologies:
• compliant to Java Card 2.2.2 specifications and VISA GlobalPlatform 2.1.1 ;
• embedded on different (by memory size and interfaces) components of a same family
developed by NXP ;
• with the Optional Code Generic r4.
These different variants of the product are summarized in the following table:
Product
version
Java Card
platform
version
Optional
Code r4.0
Generic
version
component version Reference of
the component
Large Dual 7.0-n 069774 P5CD144 V0B FC10 B0
Large Contact 7.0-n 069774 P5CC144 V0B FC10 C4
Standard Dual 7.0-n 069774 P5CD080 V0B FC10 BA
Standard 7.0-n 069774 P5CC080 V0B FC10 C5
Standard 7.0-n 069774 P5CC073 V0B FC10 C7
Basic Dual 7.0-n 069774 P5CD040 V0B FC10 C8
Basic 7.0-n 069774 P5CC040 V0B FC10 C9
Entry Dual 7.0-n 069774 P5CD020 V0B FC10 CA
1.2. Evaluated product description
The security target [ST] defines the evaluated product, its evaluated security functionalities
and its operational environment.
This security target claims conformance to [PP/0304] protection profile
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components Certification report ANSSI-CC-2009/48
Page 7 out 17
1.2.1. Product identification
The configuration list [CONF] identifies the product’s constituent elements.
The certified version of the product can be identified by elements included in the product
answer to GET DATA command (cf. [GUIDES]).
So, on an evaluated product, the GET DATA command with tag DF 52 gave the following
answer:
• DF 52 2F 01 01 B0 02 02 08 90 03 02 FC 10 04 06 06 97 74 01 E9 0B 05 01 01 06 14
83 00 01 3F 3F FF F9 00 00 00 00 01 00 00 FF 00 FF FF 00 FF 07 01 0F.
Within this answer, we can read the following identifying data (in bold caracter):
o The mask number is FC10 B0, which corresponds to the ID-One Cosmo V7.0-
n Large Dual (P5CD144 V0B)
o The Optional Code r4.0 Generic patch number is 069774 in version 01;
The GET DATA command with tag DF 50 gave the following answer:
• DF50 14 00 00 08 83 01 91 42 52 00 3A 1D 82 55 42 21 07 2B 30 32 34.
Within this answer, we can read the following identifying data (in bold caracter):
o 00 00 08 83 identifies the die
o 01 identifies the wafer
o 91 42 52 00 identifies the batch
o 3A 1D identifies XY position of the die on the wafer
o 82 55 the time of production
o 42 indentifies the index of the first foundry;
o 21 07 2B identifies the component (2B stands for Large Dual
configuration(P5CD144 V0B)) ;
o 30 32 34 identifies the ROM code number.
1.2.2. Security services
The product provides mainly the following security services:
• The card pre-personalization services;
• The personalization of applets with deletion, installation, loading under the GP Card
Manager and associated security domain control with possibility of DAP (Data
Authentication Pattern);
• The interfaces API service dedicated to applets and access to these API;
• Managing of GP and signature keys;
• The firewall for segregation of objects or applets;
• The standard GP services such as logical channel and the secure channel protocol
(SCP01, SCP02) as well as the proprietary secure channel protocol (SCP03).
A more detailed list of security services is available in [ST].
Certification report ANSSI-CC-2009/48
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components
Page 8 out 17 CER/F/07.5
1.2.3. Architecture
The product consists of:
• a microcontroller, providing hardware features, and its cryptographic library ToolBox;
• a BIOS providing the interface between native applications, such as the virtual
machine, and the hardware;
• a virtual machine which interprets the byte code of Java Card applets;
• APIs which offer interfaces to the applets such as key generation, key agreement,
signature, message ciphering and other proprietary interfaces (OCS API);
• Common Open Platform with the Card Manager, OPSystem and GPSystems APIs; it
is developed in native code and in Java (its byte code is in ROM);
• a resident application, in native code, with a basic main dispatcher, to receive the card
commands.
This architecture is summarized in the following figure:
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components Certification report ANSSI-CC-2009/48
Page 9 out 17
1.2.4. Life cycle
The product life cycle is compliant to the 7 steps life cycle of a smart card product and is
summarized in the following figure:
The evaluation has covered the conception and the development of the platform which are
done in step 1. Steps 2 and 3, until delivery, have been covered by component evaluation. The
end of step 3 and steps 4, 5 and 6 are covered by guides. The evaluated product is the one
delivered to the user in step 7.
Embedded software
development
IC design and dedicated
software development
Integration
Photomask fabrication
IC packaging and initialization
IC manufacturing, test and
possible pre-personalization
IC pre-personalization:
Platform Preperso
Personalization
Usage
End of life
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Legend
Trusted delivery and
verification procedures
Delivery supposed to
be done within
secure environment
Legend
Trusted delivery and
verification procedures
Delivery supposed to
be done within
secure environment
TOE considered
under construction
for the Evaluation.
,
covered by
assurance class
ALC
TOE considered as
operational for the
Evaluation.
,
Environment is
covered by
assurance class
AGD
Environment is
Certification report ANSSI-CC-2009/48
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components
Page 10 out 17 CER/F/07.5
The product has been developed by Oberthur Technologies on the following sites:
Oberthur Technologies - Nanterre
71-73, rue des Hautes Pâtures
92726 Nanterre
France
Oberthur Technologies - Levallois
50, quai Michelet
92 300 Levallois-Perret
France
Oberthur Technologies - Bordeaux
Parc Scientifique UNITEC 1
4, allée du Doyen Georges Brus - Porte 2
33 600 PESSAC
France
The microcontroller has been developed and manufactured by NXP Semiconductors on its
sites (cf. [BSI-DSZ-CC-0404-2007], [BSI-DSZ-CC-0410-2007], [BSI-DSZ-CC-0411-2007]),
whereof main site is:
NXP Semiconductors GmbH1
Stresemannallee 101
D-22502 Hamburg
Allemagne
In the evaluation context, the pre-personalization agent, personalization agent and card
administrator have been considered as “product administrator” and the developers of
applications to be loaded on the card have been considered as “product user”.
1.2.5. Evaluated configuration
The certificate applies to the Java Card platform only, as described above in chapter 1.2.3
Architecture, and configured according to personalization guide (cf. [GUIDES]).
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components Certification report ANSSI-CC-2009/48
Page 11 out 17
2. The evaluation
2.1. Evaluation referential
The evaluation has been performed in compliance with Common Criteria version 3.1 [CC],
with the Common Evaluation Methodology [CEM].
For assurance components which are not covered by [CEM] manual, the evaluation facility
own evaluation methods, validated by ANSSI, have been used.
In order to meet the specificities of smart cards, the [CC IC] and [CC AP] guides have been
applied.
2.2. Evaluation work
The evaluation has been performed according to the composition scheme as defined in the
guide [COMP] in order to assess that no weakness comes from the integration of the software
and the cryptographic library in the microcontroller. The library and the microcontroller have
already been certified.
This evaluation has then taken into account the evaluation results for the following
microcontrollers NXP P5Cx040 v0B (cf. [BSI-DSZ-CC-0404-2007]), P5Cx080 v0B (cf.
[BSI-DSZ-CC-0410-2007]), P5xD144v0B (cf. [BSI-DSZ-CC-0411-2007]) at EAL5 level
augmented with ALC_DVS.2, AVA_MSU.3 et AVA_VLA.4, compliant to the protection
profile [PP0002].
The evaluation technical report [ETR], delivered to ANSSI on 6 October 2009, provides
details on the work performed by the evaluation facility and assesses that all evaluation tasks
are “pass”.
2.3. Cryptographic mechanisms robustness analysis regarding to ANSSI’s
technical referentials
The robustness of cryptographic mechanisms has not been analysed by ANSSI.
Certification report ANSSI-CC-2009/48
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components
Page 12 out 17 CER/F/07.5
3. Certification
3.1. Conclusion
The evaluation was carried out according to the current rules and standards, with the required
competency and impartiality of a licensed evaluation facility. All the work performed permits
the release of a certificate in conformance with the decree 2002-535.
This certificate testifies that the ID-One Cosmo V7.0-n smartcard, as described above in
chapter 1.1, submitted for evaluation fulfils the security features specified in its security target
[ST] for the evaluation level EAL 5 augmented.
3.2. Restrictions
This certificate only applies on the product specified in chapter 1.2 of this certification report.
The user of the certified product shall respect the security objectives for the operational
environment specified in the security target [ST] and shall respect the recommendations in the
guidance [GUIDES].
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components Certification report ANSSI-CC-2009/48
Page 13 out 17
3.3. Recognition of the certificate
3.3.1. European recognition (SOG-IS)
This certificate is released in accordance with the provisions of the SOG-IS agreement [SOG-
IS].
The European Recognition Agreement made by SOG-IS in 1999 allows recognition from
Signatory States of the agreement1
, of ITSEC and Common Criteria certificates. The
European recognition is applicable up to ITSEC E6 and CC EAL7 levels. The certificates that
are recognized in the agreement scope are released with the following marking:
3.3.2. International common criteria recognition (CCRA)
This certificate is released in accordance with the provisions of the CCRA [CC RA].
The Common Criteria Recognition Arrangement allows the recognition, by signatory
countries2
, of the Common Criteria certificates. The mutual recognition is applicable up to the
assurance components of CC EAL 4 level and also to ALC_FLR family. The certificates that
are recognized in the agreement scope are released with the following marking:
1 The signatory countries of the SOG-IS agreement are: Finland, France, Germany, Greece, Italy, The
Netherlands, Norway, Spain, Sweden and United Kingdom.
2 The signatory countries of the CCRA arrangement are: Australia, Austria, Canada, Czech Republic, Denmark,
Finland, France, Germany, Greece, Hungary, India, Israel, Italy, Japan, the Republic of Korea, Malaysia,
Netherlands, New-Zealand, Norway, Pakistan, Singapore, Spain, Sweden, Turkey, the United Kingdom and the
United States of America.
Certification report ANSSI-CC-2009/48
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components
Page 14 out 17 CER/F/07.5
Annex 1. Evaluation level of the product
Composants par niveau
d’assurance
Niveau d’assurance retenu
pour le produit
Classe Famille
EAL
1
EAL
2
EAL
3
EAL
4
EAL
5
EAL
6
EAL
7
EAL
5+
Intitulé du composant
ADV_ARC 1 1 1 1 1 1 1
Security architecture
description
ADV_FSP 1 2 3 4 5 5 6 5
Complete semi-formal functional
specification with additional
error information
ADV_IMP 1 1 2 2 2
Complete mapping of the
implementation
representation of the TSF
ADV
Development
ADV_TDS 1 2 3 4 5 6 4 Semiformal modular design
AGD_OPE 1 1 1 1 1 1 1 1 Operational user guidance
AGD
Guidance AGD_PRE 1 1 1 1 1 1 1 1 Preparative procedure
ALC_CMC 1 2 3 4 4 5 5 4
Production support,
acceptance procedures and
automation
ALC_CMS 1 2 3 4 5 5 5 5
Development tools CM
coverage
ADO_DEL 1 1 1 1 1 1 1 Delivery procedures
ALC_DVS 1 1 1 2 2 2
Sufficiency of security
measures
ALC_FLR
ALC_LCD 1 1 1 1 2 1
Developer defined life-cycle
model
ALC
Life-cycle
support
ALC_TAT 1 2 3 3 2
Compliance with
implementation standards
ASE_CCL 1 1 1 1 1 1 1 1 Conformance claim
ASE_ECD 1 1 1 1 1 1 1 1
Extended component
definition
ASE_INT 1 1 1 1 1 1 1 1 ST introduction
ASE_OBJ 1 2 2 2 2 2 2 2 Security objectives
ASE_REQ 1 2 2 2 2 2 2 2 Derived security requirements
ASE_SPD 1 1 1 1 1 1 1 Security problem definition
ASE
Security
Target
Evaluation
ASE_TSS 1 1 1 1 1 1 1 1 TOE summary specifications
ATE_COV 1 2 2 2 3 3 2 Analysis of coverage
ATE_DPT 1 2 3 3 4 3 Testing: modular design
ATE_FUN 1 1 1 1 2 2 1 Functional testing
ATE
Tests
ATE_IND 1 2 2 2 2 2 3 2 Independant testing, sample
AVA
Vulnerability
assessment
AVA_VAN 1 2 2 3 4 5 5 5
Advanced methodical
vulnerability analysis
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components Certification report ANSSI-CC-2009/48
Page 15 out 17
Annex 2. Evaluated product references
[ST] Security target :
- ID-ONE COSMO V7.0 - CLIO SECURITY TARGET For NXP
Référence FQR: 110 4635 - issue 3 – 13/11/2009
Oberthur Technologies
Security Target for composition with components:
- ID-ONE COSMO V7.0 - CLIO SECURITY TARGET
COMPATIBILITY For NXP IC
Référence FQR: 110 4636 - issue 1 – 10/07/2009
Oberthur Technologies
For the needs of publication, the following security target has been
provided and validated during the evaluation:
- ID-ONE COSMO V7.0 - CLIO Security Target Lite For NXP
Référence FQR: 110 4774 - issue 2
Oberthur Technologies
[RTE] Evaluation Technical Report :
- Evaluation technical report - Project: THALIE
Référence THA_ETR - révision 2.0 – 06/10/2009
THALES-CEACI.
For the needs of composite evaluation with this platform, an Evaluation
Technical Report for composition has been evaluated:
- Evaluation technical report lite - Project: THALIE
ETR LITE for composition
Référence THA_ETR Lite – révision 1.0 – 18/09/2009
THALES-CEACI
[CONF] Configuration List of the product
- CLIO - CONFIGURATION LIST P5CxYYY
Référence FQR : 110 4628 - issue: 4 – 09/16/2009
Oberthur Technologies
[GUIDES] Installation Guides of the product :
- COP REF V02.05 - PRODUCT GENERATION
DESCRIPTION – PGD
068041 00 PGD – issue 1 AB, 13/08/2009
Oberthur Technologies
- ID-One Cosmo V7.0-n Applets - PRODUCT GENERATION
DESCRIPTION - PGD
069671 00 PGD – issue 1 AA, 05/03/2008
Oberthur Technologies
- Optional Code r4.0 Generic on ID-One Cosmo v7.0-n Platform -
PRODUCT GENERATION DESCRIPTION - PGD
069774 00 PGD – issue 4 AA, 27/03/2009
Oberthur Technologies
Administration Guides of the product :
- ID-One Cosmo V7.0 - Pre-Perso Guide
Certification report ANSSI-CC-2009/48
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components
Page 16 out 17 CER/F/07.5
FQR : 110 4379 – issue 6, 26/06/2009
Oberthur Technologies
- ID-One Cosmo V7.0 - Security recommendations
FQR 110 4730 – issue 1, 02/09/2009
Oberthur Technologies
User Guide of the product :
- ID-One Cosmo V7.0 - Reference Guide
FQR 110 4483, issue 5
Oberthur Technologies
[PP/0304] Protection profile certified on 30 September 2003 by ANSSI and
named: Java Card System - Standard 2.1.1 Configuration Protection
Profile – version 1.0b
[BSI-DSZ-
CC-0404-
2007]
BSI certificatedeliver on 5 July 2007 for the products NXP Secure Smart
Card Controller P5CD040V0B, P5CC040V0B, P5CD020V0B and
P5CC021V0B each with specific IC Dedicated Software
[BSI-DSZ-
CC-0410-
2007]
BSI certificate deliverd on 5 July 2007 for the products NXP Secure
Smart Card Controller P5CD080V0B, P5CN080VOB and
P5CC080VOB each with specific IC Dedicated Software
[BSI-DSZ-
CC-0411-
2007]
BSI certificate delivered on 5 July 2007 for the products NXP Secure
Smart Card Controller P5CD144V0B, P5CN144V0B and
P5CC144V0B each with specific IC Dedicated Software
[PP0002] Protection Profile, Smart card IC Platform Protection Profile Version
1.0 July 2001. Certifié par le BSI (Bundesamt für Sicherheit in der
Informationstechnik) sous la référence BSI-PP-0002-2001.
ID-One Cosmo V7.0-n SmartCard in configuration
Large, Standard, Basic (dual or contact modes)
or Entry (mode dual) on NXP components Certification report ANSSI-CC-2009/48
Page 17 out 17
Annex 3. Certification references
Decree number 2002-535 dated 18th
April 2002 related to the security evaluations and
certifications for information technology products and systems.
[CER/P/01] Procedure CER/P/01 - Certification of the security provided by IT
products and systems, DCSSI.
[CC] Common Criteria for Information Technology Security Evaluation :
Part 1: Introduction and general model,
September 2006, version 3.1, revision 1, ref CCMB-2006-09-001,
Part 2: Security functional components,
September 2007, version 3.1, revision 2, ref CCMB-2007-09-002,
Part 3: Security assurance components,
September 2007, version 3.1, revision 2, ref CCMB-2007-09-003.
[CEM] Common Methodology for Information Technology Security Evaluation :
Evaluation Methodology,
September 2007, version 3.1, revision 2, ref CCMB-2007-09-004.
[CC IC] Common Criteria Supporting Document - Mandatory Technical
Document - The Application of CC to Integrated Circuits, reference
CCDB-2006-04-003 version 2.0, revision 1, April 2006.
[CC AP] Common Criteria Supporting Document - Mandatory Technical
Document - Application of attack potential to smart-cards, reference
CCDB-2008-04-001 version 2.5 revision 1, April 2008.
[COMP] Common Criteria Supporting Document - Mandatory Technical
Document - Composite product evaluation for smart cards and similar
devices, reference CCDB-2007-09-001 version 1.0, revision 1, September
2007.
[CC RA] Arrangement on the Recognition of Common Criteria certificates in the
field of information Technology Security, May 2000.
[SOG-IS] «Mutual Recognition Agreement of Information Technology Security
Evaluation Certificates», version 2.0, April 1999, Management
Committee of Agreement Group.