Samsung MFP Security Kit Type_B V1.5 Security Target V1.1 Samsung Electronics Company This is proprietary information of Samsung Electronics. No part of the information contained in this document may be reproduced without the prior information of Samsung Electronics Samsung MFP Security Kit Type_B V1.5 Security Target 2 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Document History VER SIO N DATE DESCRIPTION OF CHANGE SECTIONS AFFECTED REVISE D BY 1.0 2010- 06-08 Initial Version ALL SeongIl Park 1.1 2010- 07-16 Apply OR ALL SeongIl Park - - - Samsung MFP Security Kit Type_B V1.5 Security Target 3 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Contents Document History..........................................................................2 Contents........................................................................................3 List of Figures................................................................................5 List of Tables .................................................................................6 1 Security Target Introduction.....................................................7 1.1 SECURITY TARGET REFERENCES .......................................................7 1.2 TOE REFERENCES .......................................................................7 1.3 TOE OVERVIEW..........................................................................8 1.4 TOE DESCRIPTION .................................................................... 18 1.4.1 Physical Scope ................................................................. 18 1.4.2 Logical Scope ................................................................... 20 1.5 CONVENTIONS.......................................................................... 25 1.6 TERMS AND DEFINITIONS ............................................................. 26 1.7 ACRONYMS.............................................................................. 34 1.8 ORGANIZATION ........................................................................ 35 2 Conformance Claims ...............................................................36 2.1 COMMON CRITERIA CONFORMANCE ................................................. 36 2.2 CONFORMANCE OF PROTECTION PROFILE........................................... 36 2.3 CONFORMANCE OF PACKAGE ......................................................... 36 2.4 CONFORMANCE CLAIMS RATIONALE ................................................. 36 3 Definition of Security Problems...............................................37 3.1 THREATS................................................................................ 37 3.2 ORGANIZATIONAL SECURITY POLICY ................................................ 38 3.3 ASSUMPTION ........................................................................... 38 4 Security Objectives .................................................................40 4.1 SECURITY OBJECTIVES FOR THE TOE ............................................... 40 4.2 SECURITY OBJECTIVES FOR THE ENVIRONMENT.................................... 41 4.3 SECURITY OBJECTIVES RATIONALE .................................................. 42 4.3.1 Rationale for the TOE Security Objectives ............................ 43 4.3.2 Rationale for Security Requirements for the Environment ...... 45 5 Security Requirements............................................................46 5.1 SECURITY FUNCTIONAL REQUIREMENT (SFR) ..................................... 46 5.1.1 Class FAU: Security Audit .................................................. 47 5.1.2 Class FCS: Cryptographic support....................................... 49 5.1.3 Class FDP: User data protection.......................................... 50 5.1.4 Class FIA: Identification and authentication ......................... 53 5.1.5 Class FMT: Security Management ....................................... 55 5.1.6 Class FPT: Protection of the TSF ......................................... 57 5.2 SECURITY ASSURANCE REQUIREMENTS (SAR) .................................... 58 5.2.1 Class ASE: Security Target evaluation ................................. 59 5.2.2 Class ADV: Development ................................................... 64 Samsung MFP Security Kit Type_B V1.5 Security Target 4 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 5.2.3 Class AGD: Operational user guidance................................. 67 5.2.4 Class ALC: Life-cycle support ............................................. 69 5.2.5 Class ATE: Tests............................................................... 72 5.2.6 Class AVA: Vulnerability analysis ........................................ 74 5.3 SECURITY REQUIREMENTS RATIONALE .............................................. 75 5.3.1 Rationale for the TOE Security Requirements ....................... 75 5.3.2 Rationale for the TOE Assurance Requirements .................... 80 5.3.3 Rationale for Dependencies................................................ 81 6 TOE SUMMARY SPECIFICATION ..............................................84 6.1 TOE SECURITY FUNCTIONS .......................................................... 84 6.1.1 Data Access Control (TSF_DAC).......................................... 84 6.1.2 Security Audit (TSF_FAU) .................................................. 84 6.1.3 Security Management (TSF_FMT) ....................................... 86 6.1.4 System Authentication (TSF_SAU) ...................................... 87 6.1.5 Image Overwrite (TSF_IOW).............................................. 88 6.1.6 Information Flow (TSF_FLW).............................................. 88 6.1.7 Network Access Control (TSF_NAC)..................................... 90 6.1.8 Storage Data Encryption (TSF_NVE).................................... 90 Samsung MFP Security Kit Type_B V1.5 Security Target 5 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved List of Figures Fugure 1: Operating Environment of the TOE......................................... 10 Figure 2 : Physical Structure of MFP System Software............................. 18 Figure 3: Logical Scope of the TOE ....................................................... 21 Figure 4 : Information Flow Summary................................................... 89 Samsung MFP Security Kit Type_B V1.5 Security Target 6 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved List of Tables Table 2 : Details of Non-TOE Items...................................................... 11 Table 3 : Specifications of the MFP that will use the TOE.......................... 13 Table 4 : Evaluated Software/Firmware for the TOE ................................ 19 Table 5 : Operations for each user type................................................. 22 Table 6 : TSF data for each user type.................................................... 22 Table 7 : Acronyms............................................................................. 34 Table 8 : Security Objectives and Definition of Security Problems ............. 42 Table 9 : Security Functional Requirement............................................. 46 Table 10 : Audit Event ........................................................................ 48 Table 11 : Security Functions and Its Role ............................................ 55 Table 12 : Operation and Role of each TSF Data List ............................... 56 Table 13 : Management Functions of TOE .............................................. 57 Table 14 : EAL3 Security Assurance Requirements.................................. 58 Table 15 : TOE SFR Mapping to the TOE Security Objectives .................... 75 Table 16 : Dependencies on the TOE Security Functional Components....... 82 Table 17 : Security Event .................................................................... 84 Table 18 : The TOE Security Function, Relation action and Role................ 86 Table 19 : Operation and Role of each TSF Data List ............................... 87 Table 20 : Component Relationship between the TOE Security Function and SFR Security Function ............................................................. 91 Samsung MFP Security Kit Type_B V1.5 Security Target 7 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 1 Security Target Introduction 1.1 Security Target References 1.2 TOE References Author: Samsung Electronics Version: V1.5 Publishing Date: March 25, 2010 TOE Component: TOE Component is as follows: TOE Samsung MFP Security Kit Type_B V1.5 TOE Component TSF_FLW_V1.70 TSF_SAA_V1.70 TSF_LUI_V1.70 TSF_IOW_V1.70 TSF_SFM_V1.70 TSF_WUI_V1.70 TSF_NVE_V1.70 TSF_NAC_V1.70 Security Target Title : Samsung MFP Security Kit Type_B V1.5 Security Target Security Target Version : V1.1 Publication Date : July 16, 010 Authors : Samsung Electronics Organization for Security Target Certification : IT Security Certification Center (ITSCC) of National Intelligence Service (NIS) ST Evaluator : Korea System Assurance Co., Ltd. CC Identification : Common Evaluation Standard for Information Security System (Notification No. 2009-52 by Ministry Of Public Administration and Security ( v3.1) Keywords : Samsung Electronics, Multi-function printer, Image Overwrite, Network Access Control, Storage Data Encryption Name : Samsung MFP Security Kit Type_B Samsung MFP Security Kit Type_B V1.5 Security Target 8 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 1.3 TOE Overview The TOE is embedded software on SAMSUNG Multi-function printers (MFPs). These MFPs include copy, print, scan, scan-to-email, scan-to- server, and fax features. The TOE allows the MFPs to perform image overwrite, fax/network separation, identification, and authentication tasks. Table 1 shows the options that the SAMSUNG MFPs including the TOE provide. Samsung MFP Security Kit Type_B V1.5 Security Target 9 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Table 1: Models and Capabilities Print Copy Fax Scan-to- email Scan-to- server SCX-5835FN/SCX- 5935FN Standa rd Standard Standard Standard Standard The TOE is intended to operate in a network environment that is protected from external malicious attacks (e.g., DoS), and with reliable PCs and authenticated servers. A user is able to access the TOE by using a local user interface, client machine from remote user, or a web user interface. (Refer to Figure 1: Operating Environment of the TOE.) The local user interface is designed to be accessed by casual users and a local administrator. The users can operate copy, scan, and fax through the local user interface. In the case of a scanning job, users can operate the scanning job using the local user interface and then, transfer the scanned data to a certain destination by email addresses or server PCs. Users can also use their PCs to print out documents or to access the TOE through the internal network. The local administrator can enable/disable Automatic Image Overwrite and Manual Image Overwrite, start/stop Manual Image Overwrite, set the number of times for Image Overwrite, and change a PIN via LUI. A web administrator can access TOE through the web user interface. From there, they can change the web administrator’s ID and password, enable/disable the security audit service, and download the security audit report. A telnet administrator can access TOE through the telnet interface of a telnet administrator’s PC. From there, they can change and inquire the network configuration setting values. Samsung MFP Security Kit Type_B V1.5 Security Target 10 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Fugure 1: Operating Environment of the TOE To operate TOE, additional non-TOE items such as hardware, firmware, and software are required. The following table shows the non-TOE items and their specifications. Samsung MFP Security Kit Type_B V1.5 Security Target 11 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Table 1 : Details of Non-TOE Items Types Items Objectives Specification Hardware MFP The TOE must be embedded in the MFP. Refer to Table 3 PC for system administrator PC for Web system administrator (or telnet system administrator) to access and manage TOE. Windows 2000 - CPU: Pentium II 400 MHz or higher - Memory: 64 MB or higher - HDD: 0.6 GB or higher • Windows XP - CPU: Pentium III 933 MHz or higher - Memory: 128 MB or higher - HDD: 1.5 GB • Windows 2003 Server - CPU: Pentium III 933 MHz or higher - Memory: 128 MB or higher - HDD: 1.25 GB or higher • Windows 2008 Server - CPU: Pentium IV 1 GHz or higher - Memory:512 MB or higher - HDD: 10 GB or higher • Windows Vista - CPU: Pentium IV 3 GHz or higher -Memory: 512 MB or higher - HDD: 1.5 GB or higher • Windows 7 - CPU: Pentium IV 1 GHz or higher - Memory: 1 GB or higher - HDD: 16 GB or higher • Windows Server 2008 R2 - CPU: Pentium IV 1 GHz or higher PC for general user PC for general user to print or scan or copy with TOE Samsung MFP Security Kit Type_B V1.5 Security Target 12 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Types Items Objectives Specification - Memory: 512 MB or higher - HDD: 10 GB or higher • Mac OS X 10.3 ~ 10.4 - CPU: Power PC G4/G5, Intel Processors - Memory: 128 MB Macintosh based on Power PC - HDD: 1 GB or higher • Mac OS X 10.5 - CPU: 867 MHz or Power PC G4/G5 - Memory: 512 MB or higher - HDD: 1 GB or higher • Mac OS X 10.6 - CPU: Intel Processors - Memory: 1 GB or higher - HDD: 1 GB or higher • Linux RedHat 8.0, 9.0 (32bit) RedHat Enterprise Linux WS 4, 5 (32/64bit) Fedora Core 1~7 (32/64bit) Mandrake 9.2 (32bit), 10.0, 10.1 (32/64bit) Mandriva 2005, 2006, 2007 (32/64bit) SuSE Linux 8.2, 9.0, 9.1 (32bit) SuSE Linux 9.2, 9.3, 10.0, 10.1, 10.2 (32/64bit) SuSE Linux Enterprise Desktop 9, 10 (32/64bit) Ubuntu 6.06, 6.10, 7.04 (32/64bit) Debian 3.1, 4.0 (32/64bit) - CPU: IV 2.4 GHz or higher -Memory: 512 MB or higher - HDD: 1 GB or higher Firewall system Firewall system to protect internal assets by blocking attacks from external networks. - LAN Internal network for TOE. - PSTN PSTN for translating fax image. - CAC The card with a built-in smart chip Card Reader A device to read information from the card with a built-in smart chip Firmware OpenSSL SSL library that serves safe communication between user's client PC or Web system administrator's PC and the TOE 0.98o Operating system for PC Operating system for general user or web administrator Windows 2000/XP/2003/2008/Vista/7/2008 Server R2 RedHat 8.0, 9.0 (32bit) RedHat Enterprise Linux WS 4, 5 (32/64bit) Fedora Core 1~7 (32/64bit) Mandrake 9.2 (32bit), 10.0, 10.1 (32/64bit) Mandriva 2005, 2006, 2007 (32/64bit) SuSE Linux 8.2, 9.0, 9.1 (32bit) SuSE Linux 9.2, 9.3, 10.0, 10.1, 10.2 (32/64bit) Samsung MFP Security Kit Type_B V1.5 Security Target 13 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Types Items Objectives Specification SuSE Linux Enterprise Desktop 9, 10 (32/64bit) Ubuntu 6.06, 6.10, 7.04 (32/64bit) Debian 3.1, 4.0 (32/64bit) Mac OS X 10.3 ~ 10.6 RTOS Operating system embedded in MFP. - pSOS 2.5 소프트웨어 Web browser that can serve SSL communication Web browser that serves SSL communication between general user's PC or Web administrator's PC and the TOE Internet Explorer, Safari, Firefox Printer driver Printer driver application software for general users to install in their PC. User can configure properties and start printing jobs through this printer driver. Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) Printer Driver (ver.3.10.53:18) Mac OS 10.3 ~ 10.6 Print Driver (2.00) Linux Unified Driver (3.00.65) SmarThru Office SmarThru Office is an integrated management application program. Users can install this program in their PC, then edit scanned images or send email through this program. SmarThru Office 2 (ver. 2.01.98) SyncThru 5 Monitoring program which installed server PC SyncThru 5 (ver.5.3.1.2940) Table 2 : Specifications of the MFP that will use the TOE Specifications SCX-5835FN/SCX-5935FN LCD WVGA (800x480) 7” TFT color LCD (with TSP) System Memory 256 MB System Memory, optional 256 MB DIMM (MAX 512 MB) CPU 360 MHz HDD HDD (80 GB) F A X Compatibility ITU-T G3 Comm. System PSTN / PABX Modem Speed 33.6 Kbps Interface Hi-Speed USB 2.0, Ethernet 10M/100M base TX 기타사항 Up to 33 ppm in A4 The TOE provides image overwriting, fax/network separation, identification, and authentication, storage data encryption, Network access control. Samsung MFP Security Kit Type_B V1.5 Security Target 14 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved  Image Overwrite User data created during the printing, network scanning, scan-to-email, or scan-to-server processes is immediately recorded on the hard disk drive. One of the core TOE functionalities is an image overwrite function for clearly erasing image data generated during copying, printing, network scanning, scan-to-email, and/or scan-to-server tasks. The image data is completely overwritten from one time to seven times. There are two supported image overwrite techniques. One is Automatic Image Overwrite; the other is Manual Image Overwrite. The Automatic Image Overwrite automatically carries out overwriting operations on temporary image files at the end of each job or on the files on the hard disk drive when a user initiates a delete operation. The Manual Image Overwrite function overwrites all stored files on the hard disk drive (except some system files), and the function should only be manually performed by a local administrator.  The separation of fax and network A fax image can be copied from fax memory to network card memory only when the fax image has a standard format - the standard MMR, MR, and MH image on the T.4 specification. If the fax image is not standardized, the device does not copy a fax image to network memory from fax memory. The TOE controls over and gives restricted permission to information flow between the fax board and the network port of the main controller. The direct communication between an internal client PC and fax modem in the local area will not be processed; it is only available in TOE. The fax forwarding function automatically forwards a received fax image to a designated number. When this function is activated, the device has to copy the received fax image from fax memory to network card memory. Before copying the image, the device inspects the fax image to make sure it is in standard format. The fax image can only be transferred to network memory via a public switched telephone network (PSTN) line if it is in standard format and sent to the SMTP/SMB/FTP server through the internal network.  Identification and Authentication The TOE requires dividing a real client into different kinds of access level, such as a Web/local/telnet system administrator, before giving permission to access system management. The system administrator position is divided into three positions: web administrator, local administrator, telnet administrator. In the authentication process of web administrator, the web client should input an ID and a password into the web user interface. Also, the local administrator in the Samsung MFP Security Kit Type_B V1.5 Security Target 15 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved authentication process of the local system should input a PIN into the local user Interface. The telnet administrator should input an ID and a password into the telnet interface. To retain a user’s own file, the Stored Documents feature is provided. Documents can be stored using two methods: Public or Secured. When a user stores documents using the Public option, all users can access and use the documents. When a user stores documents using the Secured option, only the user who stored the document has access. A document stored using the Secured option must include a user- assigned PIN for authentication. When accessing the document, the user must enter the assigned PIN or access is denied.  Storage Data Encryption The TOE can encrypt and store storage data through a key created to encrypt data that was read(or written) on the HDD. It can also decrypt storage data in case the user wants to use stored data. The cryptography algorithm to encrypt/decrypt data stored on the HDD is the AES algorithm and it uses 256bit key size. Each product has its unique key value and nobody (Including administrator) can leak the key value to outside.  Network Access Control  The TOE can control access to the TOE resource through network from outside of TOE by configuring port number, and enabling/disabling protocol. The communication methods to access the TOE resource from outside of the TOE through network are network protocol and port. Administrator can control access from outside using standard port by configuring non-standard port number as an allowable port number. The administrator can control access from outside by enabling/disabling protocol. This can be configured by only certificated administrators through authentication. The TOE protects assets such as image files, preserved files, system audits, and TOE configuration data.  Preserved File A client can save a file on the hard disk drive for future work. An attacker has a chance to get the file, so it should be protected from unauthorized external access. Samsung MFP Security Kit Type_B V1.5 Security Target 16 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved  System audit log The system audit logs include system-pertinent information. Because hackers can attack the TOE with bad intentions, the system audit logs must be securely protected. The audit logs that are generated by system may include system data that might be abused; hence, it should be protected from all attack attempts.  Image file An image file from a copying, printing, faxing, or scanning job may include important information that a client does not want to disclose. Therefore, it must be securely protected.  TOE configuration data  If a hacker were to acquire TOE configuration data, which includes the TOE security setup, the TOE might be compromised. System administrators must securely protect the TOE configuration data. Users can be divided into two types: administrator and general user The role of each user is as follows:  Administrator Local administrator The local administrator role manages the Samsung MFP through a local user interface. The tasks performed by this role include confirming MFP status information and setting system configurations. Moreover, local administrators activate or deactivate Automatic Image Overwrite / Manual Image Overwrite, start or stop Manual Image Overwrite, set the number of times for Image Overwrite and change PINs for security. Web administrator The web administrator role manages the web site (embedded in the Samsung MFP) by using the web user interface. This role performs the following: — Activates or deactivates security audit — Downloads the security audit log — Activates or deactivates protocol — Changes the port number — Changes the administrator’s password Samsung MFP Security Kit Type_B V1.5 Security Target 17 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Telnet administrator The telnet administrator role manages the network configuration of the MFP by using the telnet interface. This role performs the network configuration (TCP/IP, WINS, LPD, Raw TCP/IP Printing) of the MFP.  General User The general user accesses the Samsung MFP through the LUI or the user’s PC. From the local user interface, users can perform copy, fax, or scan jobs. From the user’s PC, the user can access the TOE from the internal network and print documents. When using SmarThru Office2, the user can also scan.  When a user stores documents as Secured, the user who stores the document via client PC can assign PIN to the document. The PIN should not be exposed to others. When accessing the file, the user must get permission by entering the PIN through LUI and then access to the file. Samsung MFP Security Kit Type_B V1.5 Security Target 18 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 1.4 TOE Description This section provides detailed information for the TOE evaluator and potential customer about the TOE security functions. It includes descriptions of the physical scope and logical scope of the TOE. 1.4.1 Physical Scope SoC & Hardware Platform System UI Network Emul- ation DADF Finisher Engine Data Flow manager Image Overwrite Security Audit Log Security Management Security UI Interface Security Network Interface MFP System Software TOE OS HDD Encryption Port / Protocol Management Figure 2 : Physical Structure of MFP System Software The internal structure of the MFP System Software hierarchically consists of a hardware platform, an operating system (OS) which includes a device driver, the TOE software (including system software, UI software, and network software), and non-TOE software (including emulation software, DADF software, finisher software, and engine software) The TOE is a security software module positioned on the system software, UI software, and network software. The non-TOE software module includes the emulation software, DADF software, finisher software and engine software. Samsung MFP Security Kit Type_B V1.5 Security Target 19 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved The TOE is for general users and system administrators. The following three kinds of manuals are provided with this TOE through a CD or the Web:  The user guide/troubleshooting guide describe how to install and how to use the MFP. It also provides examples of how to deal with exceptional cases.  The security administrator’s guide describes how to use security functions that the TOE provides. It also provides examples of how to deal with exceptional cases.  The network administrator’s guide describes how to configure network functions and how to set MFP functions and security functions for administrators. The system software includes security management, security audit log, image overwrite, data flow manager, and HDD encryption. The UI software includes the security UI. The network software includes the security network interface and port/protocol management. Table 3 : Evaluated Software/Firmware for the TOE Software Version SCX-5835FN/SCX-5935FN System Software V2.01.00.29_SEA31_1.03CCC - HDD Encryption TSF_NVE_V1.70 - Security Management TSF_SFM_V1.70 - Security Audit Log TSF_SAA_V1.70 - Image Overwrite TSF_IOW_V1.70 - Data Flow Manager TFS_FLW_V1.70 UI Software V1.03.01.58SEA31_1.04 - Security UI Interface TSF_LUI_V1.70 Network Software V4.01.18(SCX-5835/5935)_SEA31_1.20 - Security Network Interfac e TSF_WUI_V1.70 - Port/Protocol Management TSF_NAC_V1.70 The TOE is called the Samsung MFP Security Kit Type_B and is embedded in the MultiXpress SCX-5835FN, SCX-5935FN devices. It performs security functions for Samsung MFPs by using system software, UI software, and network software. The system software transforms the input data into the appropriate format. It also controls and manages the documents that are stored. Data created during printing, scanning, or copying is completely cleared right after the job is finished. This function can be performed by the Image Overwrite function. It also encrypts/decrypts all data stored on the HDD, when a security event occurs, authorized administrators can manage system audit functions, security jobs, TSF data, or configuration on security items. Samsung MFP Security Kit Type_B V1.5 Security Target 20 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved The network software has a web server that can be an interface between system administrators and an MFP. This software provides the functions below: - WebUI through a web server - Authentication for the web administrator and/or provides security management functions - Ability for tracing the system audit log from an external network (SWS) to web administrator - Functions for changing the port number, enabling/disabling protocol - The web system interface The UI software provides the local user interface for local administrators or authorized user to conduct MFP functions on the TOE. It also authenticates users trying to access the TOE and provides security functions for them. Emulation software, finisher software, DADF software, and engine software are not directly related to security functions, but these are the basic components for the TOE operation on the MFP hardware. 1.4.2 Logical Scope The logical scope of the TOE includes all of the software and firmware that are installed on the product. The TOE’s logical boundary is composed of the security functions provided by the product. The following security functions are provided by the TOE: • Data Access Control (TSF_DAC) • Security Audit (TSF_FAU) • Security Management (TSF_FMT) • System Authentication (TSF_SAU) • Image Overwrite (TSF_IOW) • Information Flow (TSF_FLW) • Storage Data Encryption (TSF_NVE) • Network Access Control (TSF_NAC) Samsung MFP Security Kit Type_B V1.5 Security Target 21 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Figure 3: Logical Scope of the TOE Data Access Control (TSF_DAC) The TOE prevents unauthorized use of the user-created data, which is called preserved file; the user-created data is divided into two categories, Public and Secured. When a user stores a document as Public, all users can access and use the file. A file stored as Secured can only be accessed by the user who stored the file. When storing a file as Secured, the user must set a PIN required to access the file. Then the file can only be accessed by entering the PIN on the LUI. Security Audit (TSF_FAU) Only authorized web administrators can download, analyze, and track the security audit log through the WebUI. The audit log provides a job owner’s identification, event number, date, time, ID, description, and data to ensure credibility of the audit log. The TOE generates audit logs that track events/actions (e.g., print/scan/fax job submission) to users (based on network login). The audit logs are available to the TOE system administrators and can be exported for viewing and analysis. SSL must be configured in order for the system administrator to download the audit logs; the downloaded audit logs are in comma separated format so that they can be imported into an application such as Microsoft Excel™. Samsung MFP Security Kit Type_B V1.5 Security Target 22 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Security Management (TSF_FMT) Only authorized system administrators can perform the following operations listed in Table 5: Table 4 : Operations for each user type User Type Operations Local Administra tor  Enable or disable Automatic Image Overwrite  Enable or disable Manual Image Overwrite  Start or Stop Manual Image Overwrite  Set the number of times for Image Overwrite  Change the local administrator PIN  Change or inquire the protocol and port Web Administra tor  Change the web administrator’s name and password.  Enable or disable system audit logs.  Download system audit report.  Change or inquire the protocol and port Telnet Administra tor  Change or inquire the protocol and port Only authenticated system administrators can manage the following TSF data listed in Table 6: Table 5 : TSF data for each user type User Type TSF Data Local Administra tor  Authentication data for local administrator  Configuration data on Automatic Image Overwrite enabling or disabling  The number of times for Image Overwrite  Information about protocol and port Web Administra tor  Authentication data about web administrator.  Configuration data about system audit logs enabling or disabling.  System audit logs  Information about protocol and port Telnet Administra tor  Information about protocol and port Samsung MFP Security Kit Type_B V1.5 Security Target 23 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved The TOE provides management functions about TSF data, security functions, and security configurations. Only authorized web, local, or telnet administrators can access the management functions related to security. Accessible functions for each user type are described in Table 5. Security functions for the web administrator are setting security audit functions, downloading audit logs, and managing the account for a web administrator. Security functions for the local administrator are managing PINs for the local administrator and configuring data for Image Overwrite function. Security functions for the telnet administrator are changing or reading the protocol and port. TSF data includes information on local/web administrator’s authentication, information on Automatic Image Overwrite function configuration, information on security audit configuration for web administrators, security audit log, and information on network configuration. Only authorized web administrators can download the TOE security audit record by using the web user interface through “Save as Text File”. Once the web administrator has successfully logged on to the TOE, the security audit log can be downloaded. System Authentication (TSF_SAU) The system administrator must be authenticated by entering a PIN prior to being granted access to the system administration functions. The web administrator types the ID and password in the web user interface, the local administrator types the PIN in the local user interface and the telnet administrator types the ID and password in the telnet user interface. The TOE displays an asterisk for each digit entered to hide the value entered. Identification of the local administrator at the local user interface is implicit -- administrators will identify themselves by entering their PINs. The authentication process will be delayed at the local user interface for 3 minutes if wrong PINs are entered 3 times in succession. If wrong PINs are entered 3 times at the web interface from one particular browser session, the TOE will send an error message to this browser session. The authentication process will be delayed at the telnet interface for 1 minute if wrong PINs are entered 3 times in succession by the telnet administrator. Image Overwrite (TSF_IOW) The TOE implements a hard disk drive image overwrite security function to overwrite temporary files created during the printing, network scan, Samsung MFP Security Kit Type_B V1.5 Security Target 24 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved scan-to-email, or scan-to-server process. Immediately after the job has been completed, the files on the hard disk drive are overwritten using one to seven passes for the overwrite procedure. Image Overwrite provides two kinds of functions: automatic image overwrite and manual image overwrite Automatic Image Overwrite automatically overwrites temporary image files created as a result of the processing of copying/printing/scanning or overwrites the preserved files on a reserved section of the hard disk drive of the main controller by the general user. The image overwrite security function can also be invoked manually by the local administrator (Manual Image Overwrite). Once invoked, the Manual Image Overwrite overwrites the contents of the reserved section on the hard disk drive. Information Flow (TSF_FLW) TOE has the memory to store data. The memory is divided into fax memory that fax board can only access and network memory that network port in main controller can only access. Separation between the PSTN port on the FAX board and the network port on the main controller board is established through the architectural design of the main controller software. TOE controls and restricts information flow between fax board and network port in main controller. The direct communication between client PC and fax modem in internal network is impossible; the communication can only be passed through TOE. When using fax-to-email function, the fax image received via PSTN line will be transmitted to internal network. The fax image received via PSTN line is stored first in fax memory, and then the data goes through verification process. When the fax image is proper data standardized with MMR, MR, or MH of T.4 specification, TOE copies the data to network memory. Then the fax image can be transmitted into SMTP server through network card. Every data that is transmitted to the internal network is verified by the TOE, therefore it does not threat or modify TOE component of the internal network. Storage Data Encryption (TSF_NVE) The TOE encrypts image data and configuration data on the HDD. After that, the TOE stores the data on the HDD and it decrypts the stored data to use it. The cryptographic algorithm used by the TOE is AES algorithm with 256-bit key size. Each product has its unique value and nobody (including the administrator) can leak the key value to the outside. Samsung MFP Security Kit Type_B V1.5 Security Target 25 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Network access control (TSF_NAC) The TOE can control access to the TOE resources through the network from outside TOE by changing the port number and enabling/disabling protocol. The administrator only allows access from the port configured by changing the protocol’s port number in the interface used to configure the network protocol. The administrator can also control service access from outside of TOE by enabling/disabling protocol. It can be configured by only a certificated administrator through authentication. 1.5 Conventions This section describes the conventions used to denote Common Criteria (CC) operations on security functional components and to distinguish text with special meaning. The notation, formatting, and conventions used in this ST are largely consistent with those used in the CC. Four presentation choices are discussed here. Refinement The refinement operation is used to add detail to a requirement, and thus further restricts a requirement. Refinement of security requirements is denoted by bold text. Selection The selection operation is used to select one or more options provided by the CC in stating a requirement. Selections are denoted by underlined italicized text. Assignment The assignment operation is used to assign a specific value to an unspecified parameter such as the length of a password. Showing the value in square brackets [assignment_value(s)] indicates an assignment. Iteration Iterated functional components are given unique identifiers by appending to the component name, short name, and functional element name from the CC an iteration number inside parenthesis, i.e., FIA_AFL.1(1) and FIA_AFL.1(2). The following is an additional convention used to denote this Security Target: Application note Application note clarifies the definition of requirement. It also can be used used for an additional statement that cannot be covered by the four presentations previously mentioned. Application notes are denoted by underlined text. Samsung MFP Security Kit Type_B V1.5 Security Target 26 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 1.6 Terms and definitions The terms in this security target basically follows the same terms used in common criteria. Assets Entities that the owner of the TOE presumably places value upon. Assignment The specification of an identified parameter in a component (of the CC) or requirement. Attack potential A measure of the effort to be expended in attacking a TOE, expressed in terms of an attacker's expertise, resources and motivation. Authorized user A user who may, in accordance with the SFRs, perform an operation. Class A grouping of CC families that share a common focus. Component The smallest selectable set of elements on which requirements may be based. Dependency A relationship between components such that if a requirement based on the depending component is included in a PP, ST or package, a requirement based on the component that is depended upon must normally also be included in the PP, ST or package. Samsung MFP Security Kit Type_B V1.5 Security Target 27 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Element An indivisible statement of security need. Evaluation assurance level (EAL) An assurance package, consisting of assurance requirements drawn from CC Part 3, representing a point on the CC predefined assurance scale. External entity Any entity (human or IT) outside the TOE that interacts (or may interact) with the TOE. Family A grouping of components that share a similar goal but may differ in emphasis or rigor. Identity A representation (e.g. a string) uniquely identifying an authorized user, which can either be the full or abbreviated name of that user or a pseudonym. Iteration The use of the same component to express two or more distinct requirements. Object A passive entity in the TOE, that contains or receives information, and upon which subjects perform operations. Operation (on a component of the CC) Modifying or repeating that component. Allowed operations on components are assignment, iteration, refinement and selection. Operation (on an object) Samsung MFP Security Kit Type_B V1.5 Security Target 28 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved A specific type of action performed by a subject on an object. Organizational security policy (OSP) A set of security rules, procedures, or guidelines imposed (or presumed to be imposed) now and/or in the future by an actual or hypothetical organization in the operational environment. Refinement The addition of details to a component. Role A predefined set of rules establishing the allowed interactions between a user and the TOE. Security function policy (SFP) A set of rules describing specific security behavior enforced by the TSF and expressible as a set of SFRs. Security Target (ST) An implementation-dependent statement of security needs for a specific identified TOE. Selection The specification of one or more items from a list in a component. Subject An active entity in the TOE that performs operations on objects. Target of evaluation (TOE) A set of software, firmware and/or hardware possibly accompanied by guidance. Samsung MFP Security Kit Type_B V1.5 Security Target 29 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved TOE Security Functionality (TSF) A set consisting of all hardware, software, and firmware of the TOE that must be relied upon for the correct enforcement of the SFRs. Trusted IT product An IT product other than the TOE which has its security functional requirements administratively coordinated with the TOE and which is assumed to enforce its security functional requirements correctly (e. g. by being separately evaluated). TSF Data Data created by and for the TOE, that might affect the operation of the TOE User See external entity The following are specialized terms in this security target: Network Scan Service This is a service that transmits scanned data to a PC on internal network, email, or FTP server through network. It includes scan-to- email, scan-to-server. LUI, Local User Interface Interface for general user or system administrator to access, use, or manage directly MFP. Local (System) administrator System administrator to manage Samsung MFP Security Kit Type_B V1.5 through LUI. The main roles are to configure system information and to check the MFP status for general use. The other roles for security service are enable/disable Automatic Image Overwrite/Manual Image Overwrite for security, start/stop Manual Image Overwrite, set the number of times for Image Overwrite, and change PINs. Samsung MFP Security Kit Type_B V1.5 Security Target 30 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Fax-to-email This is a function that transmits received fax image to email through internal network. This function is enabled only when mail server and address are configured. Security printing (Secure Print, Secured printing, Security printing) When a user stores file in MFP from remote client PC, the user must set security printing configuration and assign a PIN on the file. Then the user can access the file by entering the PIN through the LUI of the MFP. Preserved file To store a file on the hard disk drive of TOE, two types are provided: Public and Secured. When a user stores a document as Public, all users can access and use the file. A file stored as Secured can only be accessed by the user who stored the file. When storing a file as Secured, the user must set a PIN required to access the file. Then the file can only be accessed by entering the PIN. Multi-Function Printer, MFP MFP is a machine that incorporates the functionality of multiple devices (copy, print, scan, or fax) in one. Human User User who only refers to human being Manual Image Overwrite The Manual Image Overwrite function overwrites all stored files, including image files and preserved files, on the hard disk drive, and the function should only be manually performed by a local administrator through the local user interface. The image data is completely overwritten one to seven times. Scan-to-server Samsung MFP Security Kit Type_B V1.5 Security Target 31 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved This is a function that transmits scanned data to a remote server from local user interface. Only authorized network scan service users can use this function. Scan-to-email This is a function that transmits scanned data to a remote email server from local user interface. Only authorized network scan service users can use this function. System Administrator An authorized user who manages TOE-embedded MFP. It includes local administrator, Web administrator, and telnet administrator. Image Overwrite A function to delete all stored files on the hard disk drive. There are two kinds of image overwriting: Automatic Image Overwrite and Manual Image Overwrite. The image data is completely overwritten. WebUI, Web User Interface Interface for a general user or the system administrator to access, use, or manage the MFP through a web service. Web (system) administrator System administrator to manage Samsung MFP Security Kit Type_B V1.5 through WebUI. The main roles are to manage/change web administrator’s ID and password, enable/disable security audit function, download security audit logs. Image file Temporarily stored file that is created during scan, copy, fax job processing. Stored file Every stored file on the hard disk drive. It includes temporary files (or images) and preserved files (or images). Samsung MFP Security Kit Type_B V1.5 Security Target 32 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Public Print A file that a user stored using the Public option. It is open to every user. Electronic Image Data Image data created through an MFP’s scanner. Image data can be printed out (copy function) or be stored on the MFP’s HDD. Automatic Image Overwrite The Automatic Image Overwrite automatically carries out overwriting operations on temporary image files at the end of each job such as copy/scan/Netscan, scan-to-email, or scan-to-server. Or the Automatic Image Overwrite overwrites the files on the hard disk drive when a user initiates a delete operation. The image data is completely overwritten three times by using DoD 5200.28-M standard. FAX Job for receiving or transmitting a fax image through the fax line Fax image The receiving or transmitting data through the fax line AES Block cryptography developed by Belgium’s mathematicians, J.Daemen and V.Rijmen in 2000. AES has a block size and key size of 128, 192, or 256 bits. CAC solution CAC solution provides the authentication function through the card (Common Access Card) with a built-in smart chip. DoD 5200.28-M DoD 5200.28-M is an image overwriting standard that Department of Defense recommends. The image data in storage device is completely overwritten three times. Samsung MFP Security Kit Type_B V1.5 Security Target 33 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Embedded FAX Fax job that transmits scanned data in the MFP through the fax line and receives fax data directly from the fax line on the MFP, and then prints the data. HIPAA (Health Insurance Portability and Accountability Act) Policy that creates and reviews the records about performed job in system using hardware, software, and procedural mechanism to monitor potential violation of security rules. PC FAX Fax function that first sends fax data from client PC to MFP, and then transmits fax data through the fax line. T.4 Data compression specification for fax transmission by ITU-T (International Telecommunication Union) MH Abbreviation of Modified Huffman coding. This is an encoding method to compress for storing a TIFF type file. It is mainly used for fax transmission. MR Abbreviation of Modified Relative Element Address Designate MH coding, which includes Modified Relative Element Address Designate MH coding. MMR Abbreviation of Modified Modified Relative Element Address Designate MH coding. More advanced type than MR coding. Telnet UI, Telnet User Interface Samsung MFP Security Kit Type_B V1.5 Security Target 34 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Telnet interface for system administrators to manage MFP through the MFP’s telnet protocol. Telnet (system) administrator Telnet system administrator to manage Samsung MFP Security Kit Type_B V1.5 through telnet UI. The main roles are to inquire and change protocol and port. General user The user to use the MFP system through the LUI and user’s client PC. The main roles are to execute copy, fax, scan, and print jobs. Network user The user to access the MFP supported network system through network 1.7 Acronyms This section defines the meanings of acronyms used throughout this Security Target (ST) document Table 6 : Acronyms Acronyms Definition CC Common Criteria for Information Technology Security Evaluation CEM Common Evaluation Methodology for Information Technology Security EAL Evaluation Assurance Level HDD Hard Disk Drive ISO International Standards Organization IT Information Technology LUI Local user interface MFP Multi-function Printer OSP Organization Security Policy PP Protection Profile PPM Pages Per Minute PSTN Public Switched Telephone Network SAR Security Assurance Requirement SFP Security Function Policy Samsung MFP Security Kit Type_B V1.5 Security Target 35 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Acronyms Definition SFR Security Functional Requirement ST Security Target TOE Target of Evaluation TSF Target Security Functionality UI User Interface Web UI Web User Interface MMR Modified modified READ coding MR Modified READ Coding MH Modified Huffman coding AES Advanced Encryption Standard CAC Common Access Card 1.8 Organization Chapter 1 introduces the overview of Security Target, which includes references of Security Target, reference of the TOE, the TOE overview, and the TOE description. Chapter 2 describes the declaration about the Common Criteria, Protection Profile, and package. Chapter 3 defines the security problems of the TOE and operational environment in terms of threats, organizational security policies, and assumptions. Chapter 4 describes about TOE security objectives for countering recognized threats, enforcing the organizational security policies, and upholding the assumptions. And it describes security objectives about operating environment. Chapter 5 describes Security Functional Requirement and Security Assurance Requirement for satisfying security objectives. Chapter 6 describes actually implemented functions defined in SFR. Samsung MFP Security Kit Type_B V1.5 Security Target 36 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 2 Conformance Claims Conformance Claims describe how this Security Target document complies with the common evaluation standard, the protective profile and package. 2.1 Common Criteria Conformance This ST claims conformance to the CC v3.1:  Common Criteria Identification Common Criteria for information Technology Security Evaluation, Part 1: Introduction and general model, version 3.1r3, 2009.7, CCMB-2009-07- 001 Common Criteria for Information Technology Security Evaluation, Part 2: Security Functional Components, version 3.1r3, 2009.7, CCMB-2009-07- 002 Common Criteria for Information Technology Security Evaluation, Part 3: Security Assurance Components, version 3.1r3, 2009.7, CCMB-2009-07- 003  Conformance status of Common Criteria CC Part 2 conformant CC Part 2 conformant 2.2 Conformance of Protection Profile No Protection Profile (PP) relevant to Security Target. 2.3 Conformance of Package  The evaluation assurance level targeted by the ST is EAL3.  EAL3 conformant 2.4 Conformance Claims Rationale No Protection Profile (PP) relevant to Security Target. Therefore, there is no conformance claims rationale Samsung MFP Security Kit Type_B V1.5 Security Target 37 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 3 Definition of Security Problems 3.1 Threats Threat agents are IT entities or users that can adversely access the internal asset or harm the internal asset in an abnormal way. The threat agents are assumed in this ST to have low-level of expertise, resources, and motivation. The threats that described in this chapter will be resolved by security objectives in chapter 4. T.TOE_ACCESS_ON_NETWORK The threat agents may attempt outflow, removal, or camouflaging/forgery of user data and TSF data stored on MFP through network access by using well-known protocol and ports. T.DATA_ACCESS The threat agents may attempt unauthorized removal or camouflage / forgery of a preserved file on MFP’s hard disk drive. T.RECOVER The threat agent(s) attempts to recover a deleted image file or preserved file using a commercial tool to open a preserved file and image file of the TOE. T.CERTIFICATION_TRIAL_IN_A_ROW In order to approach the TOE, the threat agent(s) attempts to authenticate continuously and gain access level of an authorized administrator. T.CHANGE_AND_READ_STORAGE_DATA The threat agents may outflow or change stored image data and configuration data on the HDD after moving the HDD from the MFP to the outside. T.UNAUTHORIZED_ACCESS_ON_TOE The threat agent(s) may attempt to access the management functions of the TOE in an unauthorized way or change the TOE setting value by an unauthorized way and set up new values. T. INFAX The threat agents may access the TOE or a component in the internal network via fax line to add malicious code. Samsung MFP Security Kit Type_B V1.5 Security Target 38 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 3.2 Organizational Security Policy This section describes the organizational security policies that the TOE or operational environment should follow. P.HIPAA_OPT In order to keep track of security-relevant actions according to HIPAA policy, the TOE should precisely leave the job history on record and safely maintain their related security events, and properly go over the recorded data. P.SAFE_MANAGEMENT The TOE should provide a safe management tool on the Web or local user interface so that only an authorized administrator can manage the TOE in a secure manner. 3.3 Assumption The operational environment of the TOE should be managed according to the security assurance requirements about distribution, function, and guidance for user/system administrator. The following specification is an assumption of the environment where the TOE will be installed, which describes the physical, personnel, procedural, connective, and functional aspects. A. PHYSICAL_SECURITY The TOE is protected from unauthorized physical counterfeit/camouflage in the office environment. A.TRUSTED_ADMINISTRATOR The authorized system administrator of the TOE has no malice, has received education about the TOE administrative functions, and should perform proper actions according to the proposed manual provided with the TOE. The local administrator should change the PIN at least once every 40 days. A.TRUSTED_NETWORK The network connected to the TOE should install a firewall system between the internal and external network to block attacks from outside. A.TIME_STAMP Samsung MFP Security Kit Type_B V1.5 Security Target 39 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved The environment of the TOE provides reliable time-stamps for accurate audit logs about the TOE. A.SSL SSL protocol is used to serve safe communication between the user’s client PC or web system administrator’s PC and TOE through a web interface. Therefore, it provides confidentiality and integrity of data transferred between TOE and the web system administrator. A. IDENTIFICATION_AND_AUTHENTICATION_ON_CAC This security objective provides safe identification and authentication to prevent access of the MFP by unauthorized users. Samsung MFP Security Kit Type_B V1.5 Security Target 40 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 4 Security Objectives The security objectives are categorized into two parts: the objectives for the TOE and for the operational environment. The purpose of the former is to meet the goal to resolve the definition of security problems/threats. The latter is to meet the goal to support technical/procedural ways that provide the functionality of security. 4.1 Security Objectives for the TOE This section identifies and describes the security objectives of the TOE. O. AUDITS In order to trace an action of relevance to security, the TOE should provide the audit logs to only the authorized system administrator. The audit log should be protected from unauthorized change, elimination, and failure of recording in accordance with HIPAA policy. O. MANAGE The TOE should provide efficient and effective management service to an authorized system administrator. O.NETWORK_ACCESS_CONTROL The TOE should not allow access through unauthorized network protocol services and ports to prevent outflow, removal or camouflaging/forgery of user data and TSF data stored on the MFP through network access by using protocol service and port numbers that are allowed explicitly. O.CONTROL_DATA_ACCESS The TOE should perform an authentication process to prevent unauthorized removal or camouflage/forgery of a preserved file in hard disk drive. To access preserved file, a client has to enter PIN that has been configured in the file. O.IDENTIFICATION_AND_AUTHENTICATION_ON_ADMINISTRATO R The TOE should provide identification and authentication processes for system administrators to prevent access to the TOE by unauthorized users. This only allows the access of security management functions to authorized administrators. Samsung MFP Security Kit Type_B V1.5 Security Target 41 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved O.IMAGE_OVERWRITE The TOE provides an Image Overwrite function to enhance the security of the MFP. The Automatic Image Overwrite function overwrites temporary document image data at the completion of each copy, print, network scan, or scan-to-email job. The appropriate sections on the hard disk drive are overwritten one to seven times. O. HANDLING_AUTHENTICATION_FAILURE To block attacks, the TOE must take a proper action once 3 invalid login attempts have been detected. O.STORAGE_DATA_ENCRYPTION The TOE should provide data encryption by using a key generated in TOE to prevent overflow and camouflaging/forgery of stored data on the HDD by threat agents. O.FAXLINE The TOE should not allow the access of non-standard fax data from the fax modem. 4.2 Security Objectives for the Environment The security objectives for the operating environment are to support technical and procedural ways for the TOE to provide SFR (security functional requirements). OE.PHYSICAL_SECURITY The TOE will be located in an office environment where it will be monitored by the office personnel for unauthorized physical connections, manipulation or interference. OE.TRUSTED_ADMIN The system administrator of the TOE is assumed not to disclose their authentication credentials. The system administrator is not careless, willfully negligent, nor hostile, and will follow and abide by the instructions provided by the TOE documentation. The local administrator manages a 4~8 digit PIN for security and changes the PIN at least once every 40 days. OE.TRUSTED_NETWORK Samsung MFP Security Kit Type_B V1.5 Security Target 42 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved The TOE environment must protect user data from disclosure, or modification, by establishing a firewall system between external and internal network systems. OE.TIME_STAMP The operational environment must provide a reliable time stamp to mark entries in the security log. OE. SSL In case that web system administrator’s PC communicates with TOE by using a web interface, data should be transferred by SSL protocol to guarantee confidentiality and integrity. OE. IDENTIFICATION_AND_AUTHENTICATION_ON_CAC The TOE should provide identification and authentication through CAC to prevent access of the MFP’s services(Print/Copy/Network Scan/Fax) by unauthorized users. 4.3 Security Objectives Rationale This section demonstrates that all security objectives for the TOE are traced back to aspects of the assumptions to be met, identified threats to be countered or organizational security policies. Table 7 : Security Objectives and Definition of Security Problems Security Objective s Definition of Security Problems Security Objectives for the TOE Security Objectives for the Environment O.AUDITS O. MANAGE O. CONTROL_DATA_ACCESS O. IDENTIFICATION_AND_AUTHENTICATION_ON _ADMINISTRATOR O. IMAGE_OVERWRITE O. HANDLING_AUTHENTICATION_FAILURE O. NETWORK_ACCESS_CONTROL O. STORAGE_DATA_ENCRYPTION O. FAXLINE OE. PHYSICAL_SECURITY OE. TRUSTED_ADMIN OE. TRUSTED_NETWORK OE. TIME_STAMP OE. IDENTIFICATION_AND_AUTHENTICATION_ON_CAC OE. SSL Samsung MFP Security Kit Type_B V1.5 Security Target 43 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved T.DATA_ACCESS X T. RECOVER X T.CERTIFICATION_ TRIAL_IN_A_ROW X T. INFAX X T.UNAUTHORIZED_ ACCESS_ON_TOE X X T.CHANGE_AND_RE AD_STORAGE_DAT A X T.TOE_ACCESS_ON _NETWORK X P.HIPAA_OPT X P.SAFE_MANAGEME NT X A.PHYSICAL_SECUR ITY X A.TRUSTED_ADMIN X A.TRUSTED_NETW ORK X A.TIMESTAMP X A.SSL X A.IDENTIFICATION _AND_AUTHENTICA TION_ON_CAC X 4.3.1 Rationale for the TOE Security Objectives O.AUDITS This security objective correctly and safely records and maintains every event related with security to trace responsibility on security-related actions, and also reviews only by system administrators. Therefore, O.AUDITS satisfies the organization security policy P.HIPAA_OPT. O. MANAGE This security objective provides the resources to install, configure, and operate the TOE only to the system administrators. This security objective Samsung MFP Security Kit Type_B V1.5 Security Target 44 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved satisfies the T.UNAUTHORIZED_ACCESS_ON_TOE, and support A.TRUSTED_ADMINISTRATOR because the TOE is managed only by the system administrator in a safe management environment. O.NETWORK_ACCESS_CONTROL This security objective prevents the access of MFP from unauthorized network protocol service and port. Therefore, the TOE satisfies the T.TOE_ACCESS_ON_NETWORK. O.CONTROL_DATA_ACCESS This security objective allows contacting the preserved files only to the authorized user. When approaching the file, users have to enter the correct PINs and then the user can get permission to contact with it. Therefore, this security objective corresponds with threat: T.DATA_ACCESS. O.IDENTIFICATION_AND_AUTHENTICATION_ON_ADMINISTRATO R The security objective provides identification and authentication processes for system administrators that access the security management function in TOE and only allows the access of the security management function to authorized administrator. Therefore, the TOE satisfies the T.UNAUTHORIZED_ACCESS_ON_TOE. O.IMAGE_OVERWRITE The security objective provides an image overwrite function to overwrite temporary files created during the copying, printing, network scan, scan- to-email, or scan-to-server process for preventing information leakage. The image overwrite function can also be invoked manually by the system administrator. Because the removed data never can be restored, this security objective supports the threat: T.RECOVER. O.HANDLING_AUTHENTICATION_FAILURE This component defends against an attack by taking proper measures if 3 wrong PIN numbers were entered in succession. Therefore, this security objective supports the threat: T.CERTIFICATION_TRIAL_IN_A_ROW. O.STORAGE_DATA_ENCRYPTION The security objective provides encrypting data stored on the HDD by using a key generated in TOE. Therefore, the TOE satisfies T.CHANGE_AND_READ_STORAGE_DATA. O. FAXLINE Samsung MFP Security Kit Type_B V1.5 Security Target 45 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved The security objective prevents the access of nonstandard fax data from fax modem. Therefore, the TOE satisfies the T.INFAX. 4.3.2 Rationale for Security Requirements for the Environment OE.PHYSICAL_SECURITY The IT environment provides the TOE with appropriate physical security that is placed in a manned office environment secured from unauthorized physical access, falsification, or interference. Therefore, it supports assumption of A.PHYSICAL_SECURITY. OE.TRUSTED_ADMINISTRATOR The system administrator of the TOE will not disclose their authentication credentials. The administrator is not careless, willfully negligent, nor hostile, and will follow and abide by the instructions provided by the TOE documentation. Therefore, it supports assumption of A.TRUSTED_ADMINISTRATOR. OE.TRUSTED_NETWORK The objective about this operating environment ensures that attack network resources from outside is blocked by installing monitoring system between internal and external network. Therefore, it supports assumption of A.TRUSTED_NETWORK. OE.TIME_STAMP The TOE provides a reliable time stamp for recording correct security audit log entries. Therefore, it supports assumption of A. TIME_STAMP. OE.SSL When downloading security audit log, the TOE provides SSL protocol for secured data communication. Therefore, it supports assumption of A.SSL. OE. IDENTIFICATION_AND_AUTHENTICATION_ON_CAC The TOE provides identification and authentication through CAC to prevent access of the MFP’s services by unauthorized users. Therefore, it supports assumption of A.IDENTIFICATION_AND_AUTHENTICATION_ON_CAC. Samsung MFP Security Kit Type_B V1.5 Security Target 46 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 5 Security Requirements 5.1 Security Functional Requirement (SFR) Table 8 : Security Functional Requirement Class Security Functional components Security Audit FAU_GEN.1 Audit data generation FAU_SAR.1 Audit review FAU_SAR.2 Restricted audit review FAU_STG.1 Protected audit trail storage FAU_STG.4 Prevention of audit data loss Cryptographic Support FCS_CKM.1 Cryptographic key generation FCS_CKM.4 Cryptographic key destruction FCS_COP.1 Cryptographic operation User Data Protection FDP_IFC.2(1) Complete information flow control (1) FDP_IFF.1(1) Simple security attributes(1) FDP_IFC.2(2) Complete information flow control(2) FDP_IFF.1(2) Simple security attributes (2) FDP_RIP.1 Subset residual information protection Identification and Authentication FIA_AFL.1(1) Authentication failure handling (1). FIA_AFL.1(2) Authentication failure handling (2). FIA_AFL.1(3) Authentication failure handling (3). FIA_UAU.2(1) User Authentication Before Any Action (1) FIA_UAU.2(2) User Authentication Before Any Samsung MFP Security Kit Type_B V1.5 Security Target 47 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Class Security Functional components Action (2) FIA_UAU.7 Protected Authentication Feedback FIA_UID.2 User identification before any action Security Management FMT_MOF.1 Management of Security Functions Behavior FMT_MTD.1 Management of TSF data FMT_SMF.1 Specification of Management Functions FMT_SMR.1 Security roles TSF Protection FPT_RCV.4 Function recovery 5.1.1 Class FAU: Security Audit 5.1.1.1 FAU_GEN.1 Audit data generation Hierarchical to: No other components. Dependencies: FPT_STM.1 Reliable time stamps FAU_GEN.1.1 The TSF shall be able to generate an audit record of the following auditable events: a) Start-up and shutdown of the audit functions; b) All auditable events for the not specified level of audit; and c) [The events specified in Table 10 below]. FAU_GEN.1.2 The TSF shall record within each audit record at least the following information: a) Date and time of the event, type of event, subject identity (if applicable), and the outcome (success or failure) of the event; and For each audit event type, based on the auditable event definitions of the functional components included in the PP/ST, [No audit action]. Samsung MFP Security Kit Type_B V1.5 Security Target 48 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Table 9 : Audit Event SFR Audit Event FDP_IFF.1(1) Decision to admit requested information flow. FMT_MOF.1 Configuration change of security audit function, or Start/stop image overwrite. FMT_MTD.1 Query/change of security audit function. 5.1.1.2 FAU_SAR.1 Audit review Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation FAU_SAR.1.1 The TSF shall provide [Web administrator] with the capability to read [all Audit information] from the audit records. FAU_SAR.1.2 The TSF shall provide the audit records in a manner suitable for the user to interpret the information. 5.1.1.3 FAU_SAR.2 Restricted audit review Hierarchical to: No other components. Dependencies: FAU_SAR.1 Audit review FAU_SAR.2.1 The TSF shall prohibit all users read access to the audit records, except those users that have been granted explicit read-access. 5.1.1.4 FAU_STG.1 Protected audit trail storage Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation FAU_STG.1.1 The TSF shall protect the stored audit records in the audit trail from unauthorized deletion. FAU_STG.1.2 The TSF shall be able to prevent unauthorized modifications to the stored audit records in the audit trail. 5.1.1.5 FAU_STG.4 Prevention of audit data loss Hierarchical to: FAU_STG.3 Action in case of possible audit data loss Dependencies: FAU_STG.1 Protected audit trail storage Samsung MFP Security Kit Type_B V1.5 Security Target 49 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved FAU_STG.4.1 The TSF shall overwrite the oldest stored audit records and [no other actions] if the audit trail is full. 5.1.2 Class FCS: Cryptographic support 5.1.2.1 FCS_CKM.1 Cryptographic key generation Hierarchical to: No other components Dependencies: FCS_COP.1 Cryptographic operation FCS_CKM.4 Cryptographic key destruction FCS_CKM.1.1 The TSF shall generate cryptographic keys in accordance with a specified cryptographic key generation algorithm [random key generation method] and specified cryptographic key sizes [256-bit] that meet the following: [IEEE 802.11i standard]. 5.1.2.2 FCS_CKM.4 Cryptographic key destruction Hierarchical to: No other components. Dependencies: FCS_CKM.1 Cryptographic key generation FCS_CKM.4.1 The TSF shall destroy cryptographic keys in accordance with a specified cryptographic key destruction method [overwrite used cryptographic key using new generation cryptographic key Previous cryptographic keys will be overwritten with a newly generated key] that meets the following: [None]. 5.1.2.3 FCS_COP.1 Cryptographic operation Hierarchical to: No other components. Dependencies: FCS_CKM.1 Cryptographic key generation FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1 The TSF shall perform [cryptographic operation of data in HDD] in accordance with a specified cryptographic algorithm [AES] and cryptographic key sizes [256-bit] that mwweet the following: [FIPS PUB 197]. Samsung MFP Security Kit Type_B V1.5 Security Target 50 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 5.1.3 Class FDP: User data protection 5.1.3.1 FDP_IFC.2(1) Complete information flow control (1) Hierarchical to: FDP_IFC.1 Subset information flow control Dependencies: FDP_IFF.1 Simple security attributes FDP_IFC.2.1 The TSF shall enforce the [fax flow control policy] on [  Subject List - Fax image user  Information List - Fax image ] and all operations that cause that information to flow to and from subjects covered by the SFP. FDP_IFC.2.2 The TSF shall ensure that all operations that cause any information in the TOE to flow to and from any subject in the TOE are covered by an information flow control SFP. 5.1.3.2 FDP_IFF.1(1) Simple security attributes (1) Hierarchical to: No other components Dependencies: FDP_IFC.1 Subset information flow control FMT_MSA.3 Static attribute initialization FDP_IFF.1.1 The TSF shall enforce the [fax flow control policy] based on the following types of subject and information security attributes: [ • The Subject List - Fax user • Information List - Fax image • Security Properties - Subject List: No security properties - Information List: Standard fax image specifications ] Samsung MFP Security Kit Type_B V1.5 Security Target 51 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved FDP_IFF.1.2 The TSF shall permit an information flow between a controlled subject and controlled information via a controlled operation if the following rules hold: [ • When security properties of information received from a fax line is Standard fax image specification (MMR, MR, or MH of T.4 specification), information flow is permitted from fax memory to network memory. • When security properties of information that is sent to the internal network is standardized MMR, MR, or MH of T.4 specification, information flow is permitted from network memory to fax memory. ] FDP_IFF.1.3 The TSF shall enforce [none]. FDP_IFF.1.4 The TSF shall explicitly authorize an information flow based on the following rules: [no additional information flow rules]. FDP_IFF.1.5 The TSF shall explicitly deny an information flow based on the following rules: [no denial of information flow rules]. 5.1.3.3 FDP_IFC.2(2) Complete information flow control (2) Hierarchical to: FDP_IFC.1 Subset information flow control Dependencies: FDP_IFF.1 Simple security attributes FDP_IFC.2.1 The TSF shall enforce the [Network access control policy] on [ • Subject List - Network user • Information List - All information in the MFP to flow to and from any subject ] and all operations that cause that information to flow to and from subjects covered by the SFP. FDP_IFC.2.2 The TSF shall ensure that all operations that cause any information in the TOE to flow to and from Samsung MFP Security Kit Type_B V1.5 Security Target 52 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved any subject in the TOE are covered by an information flow control SFP. 5.1.3.4 FDP_IFF.1(2) Simple security attributes (2) Hierarchical to: No other components Dependencies: FDP_IFC.1 Subset information flow control FMT_MSA.3 Static attribute initialization FDP_IFF.1.1 The TSF shall enforce the [network access control policy] based on the following types of subject and information security attributes: [ • The Subject List - Network user • Information List - All information in the MFP to flow to and from any subject • Security Properties - Subject List: No security properties - Information List: protocol or port information ] FDP_IFF.1.2 The TSF shall permit an information flow between a controlled subject and controlled information via a controlled operation if the following rules hold: [ • When security properties of information are included in the protocol list that the authorized administrator set, information flow from outside to the MFP is permitted. • When security properties of information are the same port information that the authorized administrator set, information flow from outside to the MFP is permitted. ] FDP_IFF.1.3 The TSF shall enforce [none]. FDP_IFF.1.4 The TSF shall explicitly authorize an information flow based on the following rules: [no additional information flow rules]. FDP_IFF.1.5 The TSF shall explicitly deny an information flow based on the following rules: [no denial of information flow rules]. Samsung MFP Security Kit Type_B V1.5 Security Target 53 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 5.1.3.5 FDP_RIP.1 Subset residual information protection Hierarchical to: No other components. Dependencies: No dependencies. FDP_RIP.1.1 The TSF shall ensure that any previous information content of a file is overwritten according to the number of times for Image Overwrite which is set upon the deallocation of the resource from the following objects: [Stored File on the hard disk drive]. 5.1.4 Class FIA: Identification and authentication 5.1.4.1 FIA_AFL.1 (1) Authentication failure handling (1) Hierarchical to: No other components. Dependencies: FIA_UAU.1 Timing of authentication FIA_AFL.1.1 The TSF shall detect when [3] unsuccessful authentication attempts occur related to [authentication of the local administrator]. FIA_AFL.1.2 When the defined number of unsuccessful authentication attempts has been met, the TSF shall [lockout the local administrator’s login for a period of 3 minutes on the local user interface]. 5.1.4.2 FIA_AFL.1 (2) Authentication failure handling (2) Hierarchical to: No other components. Dependencies: FIA_UAU.1 Timing of authentication FIA_AFL.1.1 The TSF shall detect when [3] unsuccessful authentication attempt occurs related to [authentication at the web administrator interface from one particular Browser session]. FIA_AFL.1.2 When the defined number of unsuccessful authentication attempts has been met, the TSF shall [send an error message to this Browser session]. 5.1.4.3 FIA_AFL.1(3) Authentication failure handling (3) Hierarchical to: No other components. Dependencies: FIA_UAU.1 Timing of authentication Samsung MFP Security Kit Type_B V1.5 Security Target 54 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved FIA_AFL.1.1 The TSF shall detect when [3] unsuccessful authentication attempt occurs related to [authentication of the telnet administrator]. FIA_AFL.1.2 When the defined number of unsuccessful authentication attempts has been met, the TSF shall [lockout the telnet administrator’s login for a period of 1 minute on the telnet interface]. 5.1.4.4 FIA_UAU.2 (1) User authentication before any action (1) Hierarchical to: FIA_UAU.1 Timing of authentication Dependencies: FIA_UID.1 Timing of identification FIA_UAU.2.1 The TSF shall require each System administrator to be successfully authenticated before allowing any other TSF-mediated actions on behalf of that System administrator. Application note: System administrator includes local administrator , web administrator and telnet administrator. 5.1.4.5 FIA_UAU.2 (2) User authentication before any action (2) Hierarchical to: FIA_UAU.1 Timing of authentication Dependencies: FIA_UID.1 Timing of identification FIA_UAU.2.1 The TSF shall require each general user to be successfully authenticated before allowing any other TSF-mediated actions on behalf of that general user. Application note: General users are secured print users. 5.1.4.6 FIA_UAU.7 Protected authentication feedback Hierarchical to: No other components. Dependencies: FIA_UAU.1 Timing of authentication FIA_UAU.7.1 The TSF shall provide only [obscured feedback such as asterisk (*)] to the user while the authentication is in progress. 5.1.4.7 FIA_UID.2 User identification before any action Hierarchical to: FIA_UID.1 Timing of identification Dependencies: No dependencies. Samsung MFP Security Kit Type_B V1.5 Security Target 55 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved FIA_UID.2.1 The TSF shall require each System administrator to be successfully identified before allowing any other TSF-mediated actions on behalf of that System Administrator. Application note: Local administrator performs with authentication by PIN, without any identification function. 5.1.5 Class FMT: Security Management 5.1.5.1 FMT_MOF.1 Management of security functions behavior Hierarchical to: No other components. Dependencies: FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions FMT_MOF.1.1 The TSF shall restrict the ability to determine the behavior of, disable, enable, modify the behavior of the functions [on the table 11] to [the authorized identified roles on the table 11]. Table 10 : Security Functions and Its Role Security Function Action Role security audit function Disable, Enable Web administrator Download security audit log Determine the behavior of Web administrator Protocol management function Disable, Enable System Administrator Image overwrite Disable, Enable, Determine the behavior of, Modify the behavior of Local administrator 5.1.5.2 FMT_MTD.1 Management of TSF data Hierarchical to: No other components Dependencies: FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions Samsung MFP Security Kit Type_B V1.5 Security Target 56 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved FMT_MTD.1.1 The TSF shall restrict the ability to delete, modify, query, [download] the [user’s role corresponding with TSF data listed on the Table 12 below and operation]. Table 11 : Operation and Role of each TSF Data List TSF Data Operation Role Authentication information of web administrator Modify Web administrator Configurations on the security audit enabling/disabling. Query, Modify Web administrator Record security audit log. Download Web administrator Management information of Protocol Query, Modify administrator Configurations on the port number Query, Modify administrator Telnet administrator certificate information Modify Web administrator Authentication information for local administrator. Modify Local administrator Configurations on Automatic Image Overwrite enabling/disabling of local administrator. Query, Modify Local administrator 5.1.5.3 FMT_SMF.1 Specification of Management Functions Hierarchical to: No other components. Dependencies: No Dependencies. FMT_SMF.1.1 The TSF shall be capable of performing the following management functions [the specification of management functions on Table 13 below] Samsung MFP Security Kit Type_B V1.5 Security Target 57 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Table 12 : Management Functions of TOE Specification of security functions Management functions of TOE FAU_SAR.1 Maintain the user group who can read the security audit records. (add, modify, delete) FIA_UAU.2 a) Manage authentication data by system administrator. b) Manage authentication data related with secured data. FIA_UID.2 Manage the user’s identification. FDP_RIP.1 Manage when residual information is collected. FDP_IFF.1(2) Manage rules for information flow of control FAU_GEN.1 Manage security audit function FAU_SAR.1 Manage security audit data 5.1.5.4 FMT_SMR.1 Security roles Hierarchical to: No other components. Dependencies: FIA_UID.1 Timing of identification FMT_SMR.1.1 The TSF shall maintain the roles [system administrator]. FMT_SMR.1.2 The TSF shall be able to users with roles. 5.1.6 Class FPT: Protection of the TSF 5.1.6.1 FPT_RCV.4 Function recovery Hierarchical to: No other components. Dependencies: No dependencies. FPT_RCV.4.1 The TSF shall ensure that [ • Function List - Image Overwrite including Manual Image Overwrite and Automatic Image Overwrite • Failure Scenario Samsung MFP Security Kit Type_B V1.5 Security Target 58 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved - Power off (blackout) during image overwriting job ] have the property that the function either completes successfully, or for the indicated failure scenarios, recovers to a consistent and secure state. 5.2 Security Assurance Requirements (SAR) Security assurance requirements (SAR) defined in this document consists of assurance component in Common Evaluation Standard part 3. The Evaluation Assurance Levels (EALs) is EAL3. Table 14 shows the summary of assurance components. Table 13 : EAL3 Security Assurance Requirements Assurance Class Assurance components ASE: Security Target evaluation ASE_CCL.1 Conformance claims ASE_ECD.1 Extendable components definition ASE_INT.1 ST Introduction ASE_OBJ.2 Security objectives ASE_REQ.2 Derived security requirements ASE_SPD.1 Security problem definition ASE_TSS.1 TOE summary specification ADV: Development ADV_ARC.1 Security architecture description ADV_FSP.3 Functional specification with complete summary ADV_TDS.2 Architectural design AGD: Guidance documents AGD_OPE.1 Operational user guidance AGD_PRE.1 Preparative procedures ALC: Life-cycle support ALC_CMC.3 Authorization controls ALC_CMS.3 Implementation representation CM coverage ALC_DEL.1 Delivery procedures ALC_DVS.1 Identification of security measures ALC_LCD.1 Developer defined life-cycle model ATE: Tests ATE_COV.2 Analysis of coverage ATE_DPT.1 Testing: basic design ATE_FUN.1 Functional testing ATE_IND.2 Independent testing - sample Samsung MFP Security Kit Type_B V1.5 Security Target 59 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Assurance Class Assurance components AVA: Vulnerability Assessment AVA_VAN.2 Vulnerability analysis 5.2.1 Class ASE: Security Target evaluation 5.2.1.1 ASE_CCL.1 Conformance claims Dependencies: ASE_INT.1 ST introduction ASE_ECD.1 Extended components definition ASE_REQ.1 Stated security requirements Developer action elements: ASE_CCL.1.1D The developer shall provide a conformance claim. ASE_CCL.1.2D The developer shall provide a conformance claim rationale. Content and presentation elements: ASE_CCL.1.1C The conformance claim shall contain a CC conformance claim that identifies the version of the CC to which the ST and the TOE claim conformance. ASE_CCL.1.2C The CC conformance claim shall describe the conformance of the ST to CC Part 2 as either CC Part 2 conformant or CC Part 2 extended. ASE_CCL.1.3C The CC conformance claim shall describe the conformance of the ST to CC Part 3 as either CC Part 3 conformant or CC Part 3 extended. ASE_CCL.1.4C The CC conformance claim shall be consistent with the extended components definition. ASE_CCL.1.5C The conformance claim shall identify all PPs and security requirement packages to which the ST claims conformance. ASE_CCL.1.6C The conformance claim shall describe any conformance of the ST to a package as either package-conformant or package-augmented. ASE_CCL.1.7C The conformance claim rationale shall demonstrate that the TOE type is consistent with the TOE type in the PPs for which conformance is being claimed. Samsung MFP Security Kit Type_B V1.5 Security Target 60 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved ASE_CCL.1.8C The conformance claim rationale shall demonstrate that the statement of the security problem definition is consistent with the statement of the security problem definition in the PPs for which conformance is being claimed. ASE_CCL.1.9C The conformance claim rationale shall demonstrate that the statement of security objectives is consistent with the statement of security objectives in the PPs for which conformance is being claimed. ASE_CCL.1.10C The conformance claim rationale shall demonstrate that the statement of security requirements is consistent with the statement of security requirements in the PPs for which conformance is being claimed. Evaluator action elements: ASE_CCL.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. 5.2.1.2 ASE_ECD.1 Extended components definition Dependencies: No dependencies. Developer action elements: ASE_ECD.1.1D The developer shall provide a statement of security requirements. ASE_ECD.1.2D The developer shall provide an extended components definition. Content and presentation elements: ASE_ECD.1.1C The statement of security requirements shall identify all extended security requirements. ASE_ECD.1.2C The extended components definition shall define an extended component for each extended security requirement. ASE_ECD.1.3C The extended components definition shall describe how each extended component is related to the existing CC components, families, and classes. ASE_ECD.1.4C The extended components definition shall use the existing CC components, families, classes, and methodology as a model for presentation. ASE_ECD.1.5C The extended components shall consist of measurable and objective elements such that Samsung MFP Security Kit Type_B V1.5 Security Target 61 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved conformance or nonconformance to these elements can be demonstrated. Evaluator action elements: ASE_ECD.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ASE_ECD.1.2E The evaluator shall confirm that no extended component can be clearly expressed using existing components. 5.2.1.3 ASE_INT.1 ST Introduction Dependencies: No dependencies. Developer action elements: ASE_INT.1.1D The developer shall provide an ST introduction. Content and presentation elements: ASE_INT.1.1C The ST introduction shall contain an ST reference, a TOE reference, a TOE overview and a TOE description. ASE_INT.1.2C The ST reference shall uniquely identify the ST. ASE_INT.1.3C The TOE reference shall identify the TOE. ASE_INT.1.4C The TOE overview shall summarize the usage and major security features of the TOE. ASE_INT.1.5C The TOE overview shall identify the TOE type. ASE_INT.1.6C The TOE overview shall identify any non-TOE hardware/software/firmware required by the TOE. ASE_INT.1.7C The TOE description shall describe the physical scope of the TOE. ASE_INT.1.8C The TOE description shall describe the logical scope of the TOE. Evaluator action elements: ASE_INT.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ASE_INT.1.2E The evaluator shall confirm that the TOE reference, the TOE overview, and the TOE description are consistent with each other. 5.2.1.4 ASE_OBJ.2 Security Objectives Dependencies: ASE_SPD.1 Security problem definition Samsung MFP Security Kit Type_B V1.5 Security Target 62 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Developer action elements: ASE_OBJ.2.1D The developer shall provide a statement of security objectives. ASE_OBJ.2.2D The developer shall provide security objectives’ rationale. Content and presentation elements: ASE_OBJ.2.1C The statement of security objectives shall describe the security objectives for the TOE and the security objectives for the operational environment. ASE_OBJ.2.2C The security objectives’ rationale shall trace each security objective for the TOE back to threats countered by that security objective and OSPs enforced by that security objective. ASE_OBJ.2.3C The security objectives’ rationale shall trace each security objective for the operational environment back to threats countered by that security objective, OSPs enforced by that security objective, and assumptions upheld by that security objective. ASE_OBJ.2.4C The security objectives’ rationale shall demonstrate that the security objectives counter all threats. ASE_OBJ.2.5C The security objectives’ rationale shall demonstrate that the security objectives enforce all OSPs. ASE_OBJ.2.6C The security objectives’ rationale shall demonstrate that the security objectives for the operational environment uphold all assumptions. Evaluator action elements: ASE_OBJ.2.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. 5.2.1.5 ASE_REQ.2 Derived security requirements Dependencies: ASE_OBJ.2 Objectives ASE_ECD.1 Extended components definition Content and presentation elements: ASE_REQ.2.1D The developer shall provide a statement of security requirements. Samsung MFP Security Kit Type_B V1.5 Security Target 63 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved ASE_REQ.2.2D The developer shall provide security requirements’ rationale. Content and presentation elements: ASE_REQ.2.1C The statement of security requirements shall describe the SFRs and the SARs. ASE_REQ.2.2C All subjects, objects, operations, security attributes, external entities and other terms that are used in the SFRs and the SARs shall be defined. ASE_REQ.2.3C The statement of security requirements shall identify all operations on the security requirements. ASE_REQ.2.4C All operations shall be performed correctly. ASE_REQ.2.5C Each dependency of the security requirements shall either be satisfied, or the security requirements rationale shall justify the dependency not being satisfied. ASE_REQ.2.6C The security requirements’ rationale shall trace each SFR back to the security objectives for the TOE. ASE_REQ.2.7C The security requirements’ rationale shall demonstrate that the SFRs meet all security objectives for the TOE. ASE_REQ.2.8C The security requirements’ rationale shall explain why the SARs were chosen. ASE_REQ.2.9C The statement of security requirements shall be internally consistent. Evaluator action elements: ASE_REQ.2.1E The evaluator shall confirm that the information provided meets all of the requirements for content and presentation of evidence. 5.2.1.6 ASE_SPD.1 Security problem definition Dependencies: No dependencies. Developer action elements: ASE_SPD.1.1D The developer shall provide a security problem definition. Content and presentation elements: Samsung MFP Security Kit Type_B V1.5 Security Target 64 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved ASE_SPD.1.1C The security problem definition shall describe the threats. ASE_SPD.1.2C All threats shall be described in terms of a threat agent, an asset, and an adverse action. ASE_SPD.1.3C The security problem definition shall describe the OSPs. ASE_SPD.1.4C The security problem definition shall describe the assumptions about the operational environment of the TOE. Evaluator action elements: ASE_SPD.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. 5.2.1.7 ASE_TSS.1 TOE summary specification Dependencies: ASE_INT.1 ST Introduction ASE_REQ.1 Stated security requirements ADV_FSP.1 Basic functional specification Developer action elements: ASE_TSS.1.1D The developer shall provide a TOE summary specification. Content and presentation elements: ASE_TSS.1.1C The TOE summary specification shall describe how the TOE meets each SFR. Evaluator action elements: ASE_TSS.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ASE_TSS.1.2E The evaluator shall confirm that the TOE summary specification is consistent with the TOE overview and the TOE description. 5.2.2 Class ADV: Development 5.2.2.1 ADV_ARC.1 Security architecture description Dependencies: ADV_FSP.1 Basic functional specification ADV_TDS.1 Basic design Developer action elements: Samsung MFP Security Kit Type_B V1.5 Security Target 65 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved ADV_ARC.1.1D The developer shall design and implement the TOE so that the security features of the TSF cannot be bypassed. ADV_ARC.1.2D The developer shall design and implement the TSF so that it is able to protect itself from tampering by untrusted active entities. ADV_ARC.1.3D The developer shall provide a security architecture description of the TSF. Content and presentation elements: ADV_ARC.1.1C The security architecture description shall be at a level of detail commensurate with the description of the SFR-enforcing abstractions described in the TOE design document. ADV_ARC.1.2C The security architecture description shall describe the security domains maintained by the TSF consistently with the SFRs. ADV_ARC.1.3C The security architecture description shall describe how the TSF initialization process is secure. ADV_ARC.1.4C The security architecture description shall demonstrate that the TSF protects itself from tampering. ADV_ARC.1.5C The security architecture description shall demonstrate that the TSF prevents bypass of the SFR-enforcing functionality. Evaluator action elements: ADV_ARC.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. 5.2.2.2 ADV_FSP.3 Functional specification with complete summary Dependencies: ADV_TDS.1 Basic design Developer action elements: ADV_FSP.3.1D The developer shall provide a functional specification. ADV_FSP.3.2D The developer shall provide a tracing from the functional specification to the SFRs. Content and presentation elements: Samsung MFP Security Kit Type_B V1.5 Security Target 66 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved ADV_FSP.3.1C The functional specification shall completely represent the TSF. ADV_FSP.3.2C The functional specification shall describe the purpose and method of use for all TSFI. ADV_FSP.3.3C The functional specification shall identify and describe all parameters associated with each TSFI. ADV_FSP.3.4C For each SFR-enforcing TSFI, the functional specification shall describe the SFR-enforcing actions associated with the TSFI. ADV_FSP.3.5C For each SFR-enforcing TSFI, the functional specification shall describe direct error messages resulting from security enforcing effects and exceptions associated with invocation of the TSFI. ADV_FSP.3.6C The functional specification shall summarize the SFR-supporting and SFR-non-interfering actions associated with each TSFI. ADV_FSP.3.7C The tracing shall demonstrate that the SFRs trace to TSFIs in the functional specification. Evaluator action elements: ADV_FSP.3.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ADV_FSP.3.2E The evaluator shall determine that the functional specification is an accurate and complete instantiation of the SFRs. 5.2.2.3 ADV_TDS.2 Architectural design Dependencies: ADV_FSP.3 Functional specification with complete summary Developer action elements: ADV_TDS.2.1D The developer shall provide the design of the TOE. ADV_TDS.2.2D The developer shall provide a mapping from the TSFI of the functional specification to the lowest level of decomposition available in the TOE design. Content and presentation elements: ADV_TDS.2.1C The design shall describe the structure of the TOE in terms of subsystems. ADV_TDS.2.2C The design shall identify all subsystems of the TSF. Samsung MFP Security Kit Type_B V1.5 Security Target 67 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved ADV_TDS.2.3C The design shall describe the behavior of each SFR non-interfering subsystem of the TSF in detail sufficient to determine that it is SFR non- interfering. ADV_TDS.2.4C The design shall describe the SFR-enforcing behavior of the SFR-enforcing subsystems. ADV_TDS.2.5C The design shall summarize the SFR-supporting and SFR-non-interfering behavior of the SFR- enforcing subsystems. ADV_TDS.2.6C The design shall summarize the behavior of the SFR-supporting subsystems. ADV_TDS.2.7C The design shall provide a description of the interactions among all subsystems of the TSF. ADV_TDS.2.8C The mapping shall demonstrate that all behavior described in the TOE design is mapped to the TSFIs that invoke it. Evaluator action elements: ADV_TDS.2.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ADV_TDS.2.2E The evaluator shall determine that the design is an accurate and complete instantiation of all security functional requirements. 5.2.3 Class AGD: Operational user guidance 5.2.3.1 AGD_OPE.1 Operational user guidance Dependencies: ADV_FSP.1 Basic functional specification Developer action elements: AGD_OPE.1.1D The developer shall provide operational user guidance. Content and presentation elements: AGD_OPE.1.1C The operational user guidance shall describe, for each user role, the user-accessible functions and privileges that should be controlled in a secure processing environment, including appropriate warnings. AGD_OPE.1.2C The operational user guidance shall describe, for each user role, how to use the available interfaces provided by the TOE in a secure manner. Samsung MFP Security Kit Type_B V1.5 Security Target 68 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved AGD_OPE.1.3C The operational user guidance shall describe, for each user role, the available functions and interfaces, in particular all security parameters under the control of the user, indicating secure values as appropriate. AGD_OPE.1.4C The operational user guidance shall, for each user role, clearly present each type of security-relevant event relative to the user-accessible functions that need to be performed, including changing the security characteristics of entities under the control of the TSF. AGD_OPE.1.5C The operational user guidance shall identify all possible modes of operation of the TOE (including operation following failure or operational error), their consequences and implications for maintaining secure operation. AGD_OPE.1.6C The operational user guidance shall, for each user role, describe the security measures to be followed in order to fulfill the security objectives for the operational environment as described in the ST. AGD_OPE.1.7C The operational user guidance shall be clear and reasonable. Evaluator action elements: AGD_OPE.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. 5.2.3.2 AGD_PRE.1 Preparative procedures Dependencies: No dependencies. Developer action elements: AGD_PRE.1.1D The developer shall provide the TOE including its preparative procedures. Content and presentation elements: AGD_PRE.1.1C The preparative procedures shall describe all the steps necessary for secure acceptance of the delivered TOE in accordance with the developer's delivery procedures. AGD_PRE.1.2C The preparative procedures shall describe all the steps necessary for secure installation of the TOE and for the secure preparation of the operational Samsung MFP Security Kit Type_B V1.5 Security Target 69 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved environment in accordance with the security objectives for the operational environment as described in the ST. Evaluator action elements: AGD_PRE.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. AGD_PRE.1.2E The evaluator shall apply the preparative procedures to confirm that the TOE can be prepared securely for operation. 5.2.4 Class ALC: Life-cycle support 5.2.4.1 ALC_CMC.3 Authorization controls Dependencies: ALC_CMS.1 TOE CM (Content Management) Coverage ALC_DVS.1 Identification of security measures ALC_LCD.1 Developer defined life-cycle model Developer action elements: ALC_CMC.3.1D The developer shall provide the TOE and a reference for the TOE. ALC_CMC.3.2D The developer shall provide the CM documentation. ALC_CMC.3.3D The developer shall use a CM system. Content and presentation elements: ALC_CMC.3.1C The TOE shall be labeled with its unique reference. ALC_CMC.3.2C The CM documentation shall describe the method used to uniquely identify the configuration items. ALC_CMC.3.3C The CM system shall uniquely identify all configuration items. ALC_CMC.3.4C The CM system shall provide measures such that only authorized changes are made to the configuration items. ALC_CMC.3.5C The CM documentation shall include a CM plan. ALC_CMC.3.6C The CM plan shall describe how the CM system is used for the development of the TOE. Samsung MFP Security Kit Type_B V1.5 Security Target 70 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved ALC_CMC.3.7C The evidence shall demonstrate that all configuration items are being maintained under the CM system. ALC_CMC.3.8C The evidence shall demonstrate that the CM system is being operated in accordance with the CM plan. Evaluator action elements: ALC_CMC.3.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. 5.2.4.2 ALC_CMS.3 Implementation representation CM coverage Dependencies: No dependencies. Developer action elements: ALC_CMS.3.1D The developer shall provide a configuration list for the TOE. Content and presentation elements: ALC_CMS.3.1C The configuration list shall include the following: the TOE itself; the evaluation evidence required by the SARs; the parts that comprise the TOE; and the implementation representation. ALC_CMS.3.2C The configuration list shall uniquely identify the configuration items. ALC_CMS.3.3C For each TSF relevant configuration item, the configuration list shall indicate the developer of the item. Evaluator action elements: ALC_CMS.3.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. 5.2.4.3 ALC_DEL.1 Delivery procedures Dependencies: No dependencies. Developer action elements: ALC_DEL.1.1D The developer shall document procedures for delivery of the TOE or parts of it to the consumer. ALC_DEL.1.2D The developer shall use the delivery procedures. Content and presentation elements: Samsung MFP Security Kit Type_B V1.5 Security Target 71 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved ALC_DEL.1.1C The delivery documentation shall describe all procedures that are necessary to maintain security when distributing versions of the TOE to the consumer. Evaluator action elements: ALC_DEL.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence.. 5.2.4.4 ALC_DVS.1 Identification of security measures Dependencies: No dependencies. Developer action elements: ALC_DVS.1.1D The developer shall produce development security documentation. Content and presentation elements: ALC_DVS.1.1C The development security documentation shall describe all the physical, procedural, personnel, and other security measures that are necessary to protect the confidentiality and integrity of the TOE design and implementation in its development environment. Evaluator action elements: ALC_DVS.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ALC_DVS.1.2E The evaluator shall confirm that the security measures are being applied. 5.2.4.5 ALC_LCD.1 Developer defined life-cycle model Dependencies: No dependencies. Developer action elements: ALC_LCD.1.1D The developer shall establish a life-cycle model to be used in the development and maintenance of the TOE. ALC_LCD.1.2D The developer shall provide life-cycle definition documentation. Content and presentation elements: Samsung MFP Security Kit Type_B V1.5 Security Target 72 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved ALC_LCD.1.1C The life-cycle definition documentation shall describe the model used to develop and maintain the TOE. ALC_LCD.1.2C The life-cycle model shall provide for the necessary control over the development and maintenance of the TOE. Evaluator action elements: ALC_LCD.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. 5.2.5 Class ATE: Tests 5.2.5.1 ATE_COV.2 Analysis of coverage Dependencies: ADV_FSP.2 Security-enforcing functional specification ATE_FUN.1 Functional testing Developer action elements: ATE_COV.2.1D The developer shall provide an analysis of the test coverage. Content and presentation elements: ATE_COV.2.1C The analysis of the test coverage shall demonstrate the correspondence between the tests in the test documentation and the TSFIs in the functional specification. ATE_COV.2.2C The analysis of the test coverage shall demonstrate that all TSFIs in the functional specification have been tested. Evaluator action elements: ATE_COV.2.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. 5.2.5.2 ATE_DPT.1 Testing: basic design Dependencies: ADV_ARC.1 Security architecture description ADV_TDS.2 Architectural design ATE_FUN.1 Functional testing Developer action elements: Samsung MFP Security Kit Type_B V1.5 Security Target 73 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved ATE_DPT.1.1D The developer shall provide the analysis of the depth of testing. Content and presentation elements: ATE_DPT.1.1C The analysis of the depth of testing shall demonstrate the correspondence between the tests in the test documentation and the TSF subsystems in the TOE design. ATE_DPT.1.2C The analysis of the depth of testing shall demonstrate that all TSF subsystems in the TOE design have been tested. Evaluator action elements: ATE_DPT.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. 5.2.5.3 ATE_FUN.1 Functional testing Dependencies: ATE_COV.1 Evidence of coverage Developer action elements: ATE_FUN.1.1D The developer shall test the TSF and document the results. ATE_FUN.1.2D The developer shall provide test documentation. Content and presentation elements: ATE_FUN.1.1C The test documentation shall consist of test plans, expected test results and actual test results. ATE_FUN.1.2C The test plans shall identify the tests to be performed and describe the scenarios for performing each test. These scenarios shall include any ordering dependencies on the results of other tests. ATE_FUN.1.3C The expected test results shall show the anticipated output from a successful execution of the tests. ATE_FUN.1.4C The actual test results shall be consistent with the expected test results. Evaluator action elements: ATE_FUN.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. Samsung MFP Security Kit Type_B V1.5 Security Target 74 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 5.2.5.4 ATE_IND.2 Independent testing - sample Dependencies: ADV_FSP.2 Security-enforcing functional specification AGD_OPE.1 Operational user guidance AGD_PRE.1 Preparative procedures ATE_COV.1 Evidence of coverage ATE_FUN.1 Functional testing Developer action elements: ATE_IND.2.1D The developer shall provide the TOE for testing. Content and presentation elements: ATE_IND.2.1C The TOE shall be suitable for testing. ATE_IND.2.2C The developer shall provide an equivalent set of resources to those that were used in the developer's functional testing of the TSF. Evaluator action elements: ATE_IND.2.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ATE_IND.2.2E The evaluator shall execute a sample of tests in the test documentation to verify the developer test results. ATE_IND.2.3E The evaluator shall test a subset of the TSF to confirm that the TSF operates as specified. 5.2.6 Class AVA: Vulnerability analysis 5.2.6.1 AVA_VAN.2 Vulnerability analysis Dependencies: ADV_ARC.1 Security architecture description ADV_FSP.1 Basic functional specification ADV_TDS.1 Basic design AGD_OPE.1 Operational user guidance AGD_PRE.1 Preparative procedures Developer action elements: AVA_VAN.2.1D The developer shall provide the TOE for testing. Content and presentation elements: AVA_VAN.2.1C The TOE shall be suitable for testing. Samsung MFP Security Kit Type_B V1.5 Security Target 75 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Evaluator action elements: AVA_VAN.2.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. AVA_VAN.2.2E The evaluator shall perform a search of public domain sources to identify potential vulnerabilities in the TOE. AVA_VAN.2.3E The evaluator shall perform an independent vulnerability analysis of the TOE using the guidance documentation, functional specification, TOE design and security architecture description to identify potential vulnerabilities in the TOE. AVA_VAN.2.4E The evaluator shall conduct penetration testing, based on the identified potential vulnerabilities, to determine that the TOE is resistant to attacks performed by an attacker possessing Basic attack potential. 5.3 Security Requirements Rationale This section demonstrates that the security requirements are satisfied with the security objectives for the TOE and the IT environment. All TOE security requirements can be traced back to one or more TOE security objectives, and all TOE security objectives are supported by at least one security requirement. 5.3.1 Rationale for the TOE Security Requirements This section demonstrates that the security objectives of the TOE are satisfied by the security requirements. Table 15 provides rationale that the security requirements are corresponding with security objectives. Table 14 : TOE SFR Mapping to the TOE Security Objectives TOE Security Objectives O. AUDITS O. MANAGE O.CONTROL_DATA_AC CESS O.IDENTIFICATION_AN D_AUTHENTICATION_O N_ADMINISTRATOR O.IMAGE_OVERWRITE O.HANDLING_AUTHENT ICATION_FAILURE O.NETWORK_ACCESS_ CONTROL O. STORAGE_DATA_ENCR YPTION O.FAXLINE Samsung MFP Security Kit Type_B V1.5 Security Target 76 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved TOE Security Objectives O. AUDITS O. MANAGE O.CONTROL_DATA_AC CESS O.IDENTIFICATION_AN D_AUTHENTICATION_O N_ADMINISTRATOR O.IMAGE_OVERWRITE O.HANDLING_AUTHENT ICATION_FAILURE O.NETWORK_ACCESS_ CONTROL O. STORAGE_DATA_ENCR YPTION O.FAXLINE FAU_GEN.1 X FAU_SAR.1 X FAU_SAR.2 X FAU_STG.1 X FAU_STG.4 X FCS_CKM.1 X FCS_CKM.4 X FCS_COP.1 X FDP_IFC.2(1 ) X FDP_IFF.1(1 ) X FDP_IFC.2(2 ) X FDP_IFF.1(2 ) X FDP_RIP.1 X FIA_AFL.1(1 ) X FIA_AFL.1(2 ) X FIA_AFL.1(3 ) X Samsung MFP Security Kit Type_B V1.5 Security Target 77 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved TOE Security Objectives O. AUDITS O. MANAGE O.CONTROL_DATA_AC CESS O.IDENTIFICATION_AN D_AUTHENTICATION_O N_ADMINISTRATOR O.IMAGE_OVERWRITE O.HANDLING_AUTHENT ICATION_FAILURE O.NETWORK_ACCESS_ CONTROL O. STORAGE_DATA_ENCR YPTION O.FAXLINE FIA_UAU.2(1 ) X FIA_UAU.2(2 ) X FIA_UAU.7 X X FIA_UID.2 X FMT_MOF.1 X FMT_MTD.1 X FMT_SMF.1 X FMT_SMR.1 X FPT_RCV.4 X FAU_GEN.1 (Audit Data Generation) This component is provided to define the object of security audit related with authorized users or jobs, and also to ensure the ability of generation audit records. It satisfies security object O.AUDITS. FAU_SAR.1 (Audit Review) This component is required to ensure the ability to review the security audit log. Therefore, it satisfies security object O.AUDITS. FAU_SAR.2 (Restricted audit Review) It is ensured that only authorized web administrators can access and read the security audit log of this component. Therefore, it satisfies security object O.AUDITS. FAU_STG.1 (Protected audit trail storage) Samsung MFP Security Kit Type_B V1.5 Security Target 78 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved This component is required to ensure the ability to protect the security audit log in storage from unauthorized users. Therefore, it satisfies security object O.AUDITS. FAU_STG.4 (Prevention of audit data loss) This component is required to ensure the ability to overwrite the security audit log when storage is full of log data, and also to prevent unauthorized changes to the audit log. Therefore, it satisfies security object O.AUDITS. FCS_CKM.1 (Cryptographic key generation) This component is required to ensure the ability to generate cryptographic keys in accordance with a random key generation method and 256-bit cryptographic key sizes that meet the IEEE 802.11i standard. Therefore, it satisfies security object O.STORAGE_DATA_ENCRYPTION. FCS_CKM.4 (Cryptographic key destruction) This component is required to ensure the ability to destroy cryptographic keys in accordance with a key destruction method that overwrites used cryptographic keys using a newly generated cryptographic key. Therefore, it satisfies security object O.STORAGE_DATA_ENCRYPTION. FCS_COP.1 (Cryptographic operation) This component is required to ensure the ability to perform cryptographic operation of data in HDD in accordance with a AES cryptographic algorithm and 256-bit key sizes that meet FIPS PUB 197. Therefore, it satisfies security object O.STORAGE_DATA_ENCRYPTION. FDP_IFC.2(1) (Complete information flow control) This component is required to ensure the ability to enforce the fax flow control policy on Fax image user, Fax image and all operations. Therefore, it satisfies security object O.FAXLINE. FDP_IFF.1(1) (Simple security attributes) This component is required to ensure the ability to define roles for fax flow control policy and enforce the fax flow control policy based on roles defined. Therefore, it satisfies security object O.FAXLINE. FDP_IFC.2(2) (Complete information flow control) This component is required to ensure the ability to enforce the network access control policy on network users and all operations that cause that information to flow from network user to MFP. Therefore, it satisfies security object O.NETWORK_ACCESS_CONTROL. FDP_IFF.1(2) (Simple security attributes) Samsung MFP Security Kit Type_B V1.5 Security Target 79 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved This component is required to ensure the ability to define roles for fax flow control policy and enforce the fax flow control policy based on roles defined. Therefore, it satisfies security object O.NETWORK_ACCESS_CONTROL. FDP_RIP.1 (Subset Residual Information Protection) It is ensured that in case of deleting the stored file from the hard disk drive, this component completely deletes the stored file by the number of times for Image Overwrite. Therefore, it satisfies security object O.IMAGE_OVERWRITE. FIA_AFL.1 (1) (Authentication failure handling) This component ensures defense against attacks from a wrong trial of authentication. The authentication process will be delayed at the local user interface for 3 minutes if wrong PINs are entered 3 times in succession. Therefore, it satisfies security object O.HANDLING_AUTHENTICATION_FAILURE. FIA_AFL.1 (2) (Authentication failure handling) This component is required to ensure the ability to detect when an unsuccessful authentication attempt occurs and send an error message to this browser session when the three unsuccessful authentication attempts criteria has been met. Therefore, it satisfies security object O.HANDLING_AUTHENTICATION_FAILURE. FIA_AFL.1 (3) (Authentication failure handling) This component is required to ensure the ability to detect when an unsuccessful authentication attempt occurs and lockout the telnet administrator's login for a period of 1 minute on the telnet interface when the three unsuccessful authentication attempts criteria has been met. Therefore, it satisfies security object O.HANDLING_AUTHENTICATION_FAILURE. FIA_UAU.2 (1) (User Authentication Before Any Action) This component ensures that the system administrator must get authentication before accessing the TOE functionality. Therefore, it satisfies security object O.IDENTIFICATION_AND_AUTHENTICATION_ON_ADMINISTRATOR. FIA_UAU.2 (2) (User Authentication before Any Action) This component ensures that the security print user must get authentication before accessing the TOE functionality. Therefore, it satisfies security object O. CONTROL_DATA_ACCESS. FIA_UAU.7 (Protected Authentication Feedback) Samsung MFP Security Kit Type_B V1.5 Security Target 80 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved This component ensures that fake characters (e.g. asterisk [*]) are displayed for each digit entered to hide the value entered. Therefore, it satisfies security object O. CONTROL_DATA_ACCESS, and O. IDENTIFICATION_AND_AUTHENTICATION_ON_ADMINISTRATOR FIA_UID.2 (User identification before any action) This component ensures the identification of system administrators before granting access to the TOE. Therefore, it satisfies security object O. IDENTIFICATION_AND_ AUTHENTICATION_ON_ADMINISTRATOR. FMT_MOF.1 (Management of Security Functions Behavior) This component ensures that only authorized system administrators can limitedly access the TSF management function. Therefore, it satisfies security object O. MANAGE. FMT_MTD.1 (Management of TSF data) This component defines that only authorized system administrators can change, query, delete, or download the TSF data. Therefore, it satisfies security object O. MANAGE. FMT_SMF.1 (Specification of Management Functions) This component ensures that the security management function in the TOE is available. Therefore, it satisfies security object O. MANAGE. FMT_SMR.1 (Security roles) This component ensures that the TOE plays a reliable system administrator’s role to manage the TOE and TSF. Therefore, it satisfies security object O. MANAGE. FPT_RCV.4 (Function recovery) This component ensures that TSF is recovered to a stable and safe state from pre-defined errors. Therefore, it satisfies security object O.IMAGE_OVERWRITE. 5.3.2 Rationale for the TOE Assurance Requirements This Samsung MFP Security Kit Type_B V1.5 satisfies the assurance requirements of EAL3 EAL3 is an assurance package that requires well-organized test and inspection. EAL3 permits a conscientious developer to gain maximum assurance from positive security engineering at the design stage without substantial alteration of existing sound development practices. EAL3 is applicable in those circumstances where developers or users require a moderate level Samsung MFP Security Kit Type_B V1.5 Security Target 81 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved of independently assured security, and require a thorough investigation of the TOE and its development without substantial re-engineering. To understand security actions, EAL3 provides assurance using the specifications of function or interface, guidance, and structural explanation of the TOE structure by analyzing SFR included in a complete ST. This analysis is supported by independent testing of TSF, the proof of developer’s test based on the functional specification or the TOE design, independent confirmation of test result samples by the developer, vulnerability analyses to ensure the tolerance to the attack based on the functionality specification, the TOE design, security structure, or guidance. EAL3 also provides assurance by controlling the development environment, managing the TOE version control, and proofing a safe releasing process. 5.3.3 Rationale for Dependencies 5.3.3.1 SFR Dependencies FIA_UAU.2 and FMT_SMR.1 have a subordinate relationship with FIA_UID.1, but they are satisfied by FIA_UID.2 that is a hierarchical relationship with FIA_UID.1. FIA_AFL.1 and FIA_UAU.7 have a subordinate relationship with FIA_UAU.1, but they are satisfied by FIA_UAU.2 that is a hierarchical relationship with FIA_UAU.1. FAU_GEN.1 has a subordinate relationship with FPT_STM.1. But because the TOE records security events correctly with reliable time-stamps, FAU_GEN.1 is satisfied by OE.TIME_STAMP of operational environment instead of FPT_STM.1. FDP_IFF.1(1) and FDP_IFF.1(2) have a subordinate relationship with FDP_IFC.1, but they are satisfied by FDP_IFC.2(1), FDP_IFC.2(2) that is a hierarchical relationship with FDP_IFC.1. FDP_IFF.1(1) has a subordinate relationship with FMT_MSA.3, but because the security properties of FDP_IFF.1(2)’s subject (None) and the security properties of information (fax image standard) are not objects for management, FMT_MSA.3 is not required. FDP_IFF.1(2) has a subordinate relationship with FMT_MSA.3, but because the security properties of FDP_IFF.1(1)’s subject (None) and the security properties of information (protocol and port) are not objects for management, FMT_MSA.3 is not required. Samsung MFP Security Kit Type_B V1.5 Security Target 82 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved FIA_UAU.2(2) has a subordinate relationship with FIA_UID.1, but because security printing supports authentication by the PIN number without identification, FIA_UID.1 is not required. Table 15 : Dependencies on the TOE Security Functional Components Nu mb er Functional Component ID Dependencies Reference Number 1 FAU_GEN.1 FPT_STM.1 * 2 FAU_SAR.1 FAU_GEN.1 1 3 FAU_SAR.2 FAU_SAR.1 2 4 FAU_STG.1 FAU_GEN.1 1 5 FAU_STG.4 FAU_STG.1 4 6 FCS_CKM.1 FCS_CKM.4, FCS_COP.1 7, 8 7 FCS_CKM.4 FCS_CKM.1 6 8 FCS_COP.1 FCS_CKM.1, FCS_CKM.4 6, 7 9 FDP_IFC.2(1) FDP_IFF.1(1) 10 10 FDP_IFF.1(1) FDP_IFC.1, FMT_MSA.3 9, # (FDP_IFC.2(1)과 계층관계) 11 FDP_IFC.2(2) FDP_IFF.1(2) 12 12 FDP_IFF.1(2) FDP_IFC.1, FMT_MSA.3 11, # (FDP_IFC.2(2)과 계층관계) 13 FDP_RIP.1 - - 14 FIA_AFL.1(1) FIA_UAU.1 17 (Hierarchically by FIA_UAU.2(1)) 15 FIA_AFL.1(2) FIA_UAU.1 17 (Hierarchically by FIA_UAU.2(1)) 16 FIA_AFL.1(3) FIA_UAU.1 17 (Hierarchically by FIA_UAU.2(1)) Samsung MFP Security Kit Type_B V1.5 Security Target 83 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Nu mb er Functional Component ID Dependencies Reference Number 17 FIA_UAU.2(1) FIA_UID.1 20 (Hierarchically by FIA_UID.2) 18 FIA_UAU.2(2) FIA_UID.1 20 (Hierarchically by FIA_UID.2) 19 FIA_UAU.7 FIA_UAU.1 17, 18 (Hierarchically by FIA_UAU.2(1),(2)) 20 FIA_UID.2 - - 22 FMT_MOF.1 FMT_SMF.1, FMT_SMR.1 24, 25 23 FMT_MTD.1 FMT_SMF.1, FMT_SMR.1 24, 25 24 FMT_SMF.1 - - 25 FMT_SMR.1 FIA_UID.1 20 (Hierarchically by FIA_UID.2) 26 FPT_RCV.4 - - 5.3.3.2 SAR Dependencies SAR dependencies provided in the Common Evaluation Standard for Information Security System have been already met. Samsung MFP Security Kit Type_B V1.5 Security Target 84 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 6 TOE SUMMARY SPECIFICATION This section presents an overview of the security functions implemented by the TOE and the assurance measures applied to ensure their correct implementation. 6.1 TOE Security Functions This section presents the security functions performed by the TOE to satisfy the identified SFRs in Section 5.2. • Data Access Control (TSF_DAC) • Security Audit (TSF_FAU) • Security Management (TSF_FMT) • System Authentication (TSF_SAU) • Image Overwrite (TSF_IOW) • Information Flow (TSF_FLW) • Network Access Control (TSF_NAC) • Storage Data Encryption (TSF_NVE) 6.1.1 Data Access Control (TSF_DAC) The TOE controls data access to the Stored Document that a user stored as Secured. In the Stored Documents feature, the documents can be stored using two methods: Public or Secured. When a user stores documents as Public, all users can access and use the files. Files stored as Secured only allow the user who stored the file to access the file with a PIN. When storing a Secured file, the user must enter a PIN to secure the file. When accessing the file, the user must enter the PIN again. Relevant SFR: FIA_UAU.2(2), FIA_UAU.7 6.1.2 Security Audit (TSF_FAU) The TOE tracks events/actions (e.g., print/scan/fax job submission) to login users. The audit logs are created for each event in fixed size. Each audit log provides the user’s identification, event number, date, time, ID, description, and data. The audit logs are available to web administrators and can be exported for review and analysis by using the web user interface. Table 16 : Security Event Audit log consists of the following fixed-size input data. Input Number (An integer number from 1 to the number of log data) Samsung MFP Security Kit Type_B V1.5 Security Target 85 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Event Date (mm/dd/yyyy) Event Time (hh:mm:ss) - Event ID (Specific number – Refer to the following table) Event ID Event Explanation Input Data 1 System startup Device name, Serial number of the device 2 System shutdown Device name, Serial number of the device 3 Manual Image Overwrite started Device name, Serial number of the device 4 Manual Image Overwrite complete Device name, Serial number of the device, Completion status 5 Print Job Job name, User name, Completion status, Automatic Image Overwrite job status, SyncThru user’s account 6 Network scan job Job name, User name, Completion status, Automatic Image Overwrite job status, SyncThru user’s account, total number of the destination address, Destination address 9 Scan-to-email job Job name, User name, Completion status, Automatic Image Overwrite job status, SyncThru user’s account, Total number of SMTP receiver , SMTP receiver 10 Audit Log Disabled Device name, Serial number of the device 11 Audit Log Enabled Device name, Serial number of the device 12 Copy job Job name, User name, Completion status, Automatic Image Overwrite job status, SyncThru user’s account 13 Embedded fax job Job Type (Sending fax, Receiving fax), Job name, User name, Completion status, Automatic Image Overwrite job status, SyncThru user’s account, Total number of the fax number to receive , Fax number to receive, Destination address 14 PC-Fax job Job name, User name, Completion status, Automatic Image Overwrite job status, SyncThru user’s account, Total number of the fax number to receive , Fax number to receive, Destination address The audit log traces decisions that allow requested data flow, changes in security audit function, image overwrite start/stop, inquiry/change of security audit configuration, and recovery from failure of image Samsung MFP Security Kit Type_B V1.5 Security Target 86 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved overwriting job. Because the audit records are only available to the authorized web administrators, unauthorized users cannot change or delete them. Audit records can be downloaded by using the Web interface for review and analysis. When storage is full of log data, the latest records overwrite the oldest audit records. Relevant SFR : FAU_GEN.1, FAU_SAR.1, FAU_SAR.2, FAU_STG.1, FAU_STG.4, 6.1.3 Security Management (TSF_FMT) The TOE accomplishes security management for security function, TSF data, and security attribute. Only authorized web/local/telnet administrators can manage the security functions. The available security functions for each user’s role are displayed in Table 18. Web administrators can manage the following functions: enable or disable security audit function, download security audit log, change the account of a web administrator, etc. Local administrators can manage the following functions: change PIN of local administrator, enable/disable/start/stop the image overwriting function, etc. General users can perform the following functions: configure security printing on the preserved files on the hard disk drive. Telnet administrators can manage the following functions: inquire and change network setting values. TSF data that is stated in Table 19: Authentication information of local administrator, Authentication information of web administrator, authentication information of telnet administrator, enable or disable Automatic Image Overwrite setting value for local administrator, enable or disable security audit setting value for web administrator. Only authorized web administrators can download the TOE security audit record by using the web user interface through “Save as Text File”. Once the web administrator has successfully logged on to the TOE, the security audit log can be downloaded. Table 17 : The TOE Security Function, Relation action and Role Security Function Action Role Enable security audit function Disable, Enable Web administrator Download security audit log Determine the behavior of Web administrator Samsung MFP Security Kit Type_B V1.5 Security Target 87 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Protocol management Disable, Enable Administrator Image Overwrite Disable, Enable, Determine the behavior of, Modify the behavior of Local administrator Table 18 : Operation and Role of each TSF Data List TSF Data Operation Role Authentication information of web administrator Modify Web administrator Configurations on the security audit enabling/disabling. Query, Modify Web administrator Record security audit log. Download Web administrator Protocol management Query, Modify Administrator Configurations on the port number Query, Modify Administrator Authentication information for telnet administrator Modify Web administrator Authentication information for local administrator. Modify Local administrator Configurations on Image Overwrite enabling/disabling of local administrator. Query, Modify Local administrator 해당 SFR: FMT_MOF.1, FMT_MTD.1, FMT_SMF.1, FMT_SMR.1 6.1.4 System Authentication (TSF_SAU) The local administrator must be authenticated by entering a PIN prior to being granted access to the TOE management functions. The TOE displays an asterisk (*) for each digit entered to hide the value entered. The local administrator can type the PIN in a local user interface without any other identification. The PIN number can be managed only by the local administrator. The web (or telnet) administrator must type an ID and password in the web (or telnet) user interface. Therefore, each web administrator can be identified with each other. The TOE displays an Samsung MFP Security Kit Type_B V1.5 Security Target 88 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved asterisk (*) for each digit entered, and just provides ambiguous feedback with success or fail information. This prevents users from acquiring any information during the trial. The authentication process will be delayed for 3 minutes if wrong passwords are entered 3 times in succession in a local user interface. If wrong passwords were entered 3 times in succession in the web user interface, the web browser displays an error message. If wrong passwords were entered 3 times in succession in the telnet system interface, the authentication process will be delayed for 1 minute Relevant SFR: FIA_AFL.1(1), FIA_AFL.1(2), FIA_AFL.1(3), FIA_UAU.2(1), FIA_UAU.7, FIA_UID.2(1) 6.1.5 Image Overwrite (TSF_IOW) The TOE provides Image Overwrite functions that delete the stored file from the hard disk drive. The Image Overwrite function consists of Automatic Image Overwrite and Manual Image Overwrite. The TOE implements an image overwrite security function (Automatic Image Overwrite) to overwrite temporary files created during the copying, printing, scan-to-email, or scan-to-server processes. Also, users can delete their own files stored in the TOE. The image overwrite security function can also be invoked manually only by the system administrator (Manual Image Overwrite). Once invoked, the Manual Image Overwrite cancels all print and scan jobs, halts the printer interface (network), overwrites the contents of the reserved section the number of times for Image Overwrite that is set(from one to seven times) on the hard disk, and then the main controller reboots. If there are any problems during overwriting, the Manual Image Overwrite job automatically restarts after the problem is resolved to overwrite the remaining area. Relevant SFR: FDP_RIP.1, FPT_RCV.4 6.1.6 Information Flow (TSF_FLW) In the TOE, the memory areas for the fax board and for the network port on the main controller board are separated. If the received fax data includes malicious virus content, it may threaten the TOE asset such as the TOE itself or internal network components. To prevent this kind of threat, the TOE, before “fax forward to email” or “fax forward to server(SMB/FTP)”, inspects whether the received fax image is standardized with MMR, MR, or MH of T.4 specification or not. When the data is considered to be safe, the memory copy continues from the fax memory area to network memory area. The fax data in network memory is transmitted to the SMTP servers through the internal network. When Samsung MFP Security Kit Type_B V1.5 Security Target 89 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved malignant codes are discovered, the TOE destroys the fax image. Fax security functions follow the fax flow control policy. The fax flow control policy is as follows: Direct access to a received fax image from the fax modem to the user PC through the internal network is not possible. Communication can be made only through TOE. The fax image received from the fax line is inspected first. When the data is determined to be safe, the memory copy continues from the fax memory area to the network memory area. When a fax board is not installed, the information flow does not exist and does not need the protection. • Fax modem controller in the TOE is physically separated with MFP controller, and fax function is logically separated with MFP functions. • Fax interface only answers to the predefined fax protocol, and never answers to any other protocol. Fax modem controller provides only a standardized fax image format of MMR, MR, or MH of T.4 specification. Therefore, the TOE does not answer to malicious code or vicious executable files. Relevant SFR: FDP_IFC.2(1), FDP_IFF.1(1) Figure 4 : Information Flow Summary Samsung MFP Security Kit Type_B V1.5 Security Target 90 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved 6.1.7 Network Access Control (TSF_NAC) The MFP system including the TOE has a network interface card (network card) connected to an external network. The MFP system can send/receive data and MFP configuration information and, thus, is able to configure MFP settings. There are a couple of methods to access and communicate with the MFP from outside of the TOE through the network; a standard communication protocol and a port that performs as a logical network channel. These services start up simultaneously as a system's network card boots, and the port number is defined as a logical channel in the range of 1 to 65535. Among these services, the service that uses upper protocol utilizes a predefined "well-known port". The TOE only allows access from authorized ports and connection using authorized protocol services by configuring port number, and enabling/disabling network services accessing the MFP system. Only the web system administrator and telnet system administrator authorized through login can configure these functions, and these configurations are altered on each reboot of the network card, and, thus, the MFP system information and electronic image data are protected from unauthorized reading and falsification. Relevant SFR: FDP_IFC.2(2), FDP_IFF.1(2), FMT_SMF.1, FMT_SMR.1 6.1.8 Storage Data Encryption (TSF_NVE) The TOE provides both encrypting functions during data storage procedure and decrypting functions in the process of accessing stored data from hard disk drive with certain algorithm. The algorithm used is AES 256 stated in FIPS-PUB 197, and 256-bit encryption key is randomly generated by key generating algorithm corresponding to IEEE 802.11i. This key is randomly generated only once when the product is installed, and kept in a safe place. The access to this key is not allowed to any users including system administrator. The encrypting/decrypting targets are configuration data and all data stored on the HDD, including electronic image data. The encryption/decryption scheme is processed when data are stored or accessed, and protects data from unauthorized reading and falsification even if the HDD is stolen. Relevant SFR: FCS_CKM.1, FCS_CKM.4, FCS_COP.1 Samsung MFP Security Kit Type_B V1.5 Security Target 91 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved Table 19 : Component Relationship between the TOE Security Function and SFR Security Function TOE Security Function Data Access Control Security Audit Security Management System Authentication Image overwrite Storage Data Encryption Network Access Control Information flow FAU_GEN.1 X FAU_SAR.1 X FAU_SAR.2 X FAU_STG.1 X FAU_STG.4 X FCS_CKM.1 X FCS_CKM.4 X FCS_COP.1 X FDP_IFC.2(1) X FDP_IFF.1(1) X FDP_IFC.2(2) X FDP_IFF.1(2) X FDP_RIP.1 X FIA_AFL.1(1) X FIA_AFL.1(2) X FIA_AFL.1(3) X FIA_UAU.2(1) X FIA_UAU.2(2) X FIA_UAU.7 X X Samsung MFP Security Kit Type_B V1.5 Security Target 92 Copyright 2010 Samsung Electronics Co., Ltd., All rights reserved TOE Security Function Data Access Control Security Audit Security Management System Authentication Image overwrite Storage Data Encryption Network Access Control Information flow FIA_UID.2 X FMT_MOF.1 X FMT_MTD.1 X FMT_SMF.1 X FMT_SMR.1 X FPT_RCV.4 X