- 1 -
KECS-CR-10-16
Samsung MFP Security Kit Type_B V1.0
Certification Report
Certification No.: KECS-CISS-0229-2010
April 2010
IT Security Certification Center
Revision history
No. Date Page Revision
00 22 Apr. 2010 - First draft
- 3 -
This document is the certification report on Samsung MFP
Security Kit Type_B V1.0 of Samsung Electronics Co., Ltd.
Certification Body
IT Security Certification Center
Evaluation Facility
Korea System Assurance, Inc.
- 4 -
Table of Contents
1. Overview ······································································································1
2. TOE Identification ···················································································2
3. Security Policy ··························································································3
4. Assumptions and Scope ········································································3
4.1 Assumptions ·····································································································3
4.2 Scope to Counter a Threat ·········································································4
5. TOE Information ······················································································5
6. Guidance ······································································································9
7. TOE Test ··································································································10
7.1 Developer's Test ··························································································10
7.2 Evaluator's Test ···························································································10
8. Evaluation Configuration ····································································11
9. Evaluation Results ················································································12
10. Recommendations ·················································································15
11. Acronyms and Glossary ···································································16
12. Reference ·································································································17
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 1 -
1. Overview
This report describes the certification result drawn by the certification body on the
results of the EAL3 evaluation of Samsung MFP Security Kit Type_B V1.0
("TOE" hereinafter) with reference to the Common Criteria for Information
Technology Security Evaluation (notified on 1 Sep. 2009, "CC" hereinafter). It
describes the evaluation result and its soundness and conformity.
The evaluation of the TOE has been carried out by Korea System Assurance,
Inc.(KOSYAS) and completed on 31 March 2010. This report grounds on the
evaluation technical report(ETR) KOSYAS had submitted, in which the
evaluation has confirmed that the product had satisfied the requirements of CC
Part 2 and CC Part 3 and had been "suitable" according to the CC Part 1,
paragraph 245.
The TOE is software embedded on SAMSUNG multi-function printers(MFPs).
These MFPs include copy, print, scan, netscan, scan-to-email, scan-to-server,
and fax features. The TOE allows the MFPs to perform image overwrite,
fax/network separation, identification, authentication, and network access control
tasks.
The CB has examined the evaluation activities and test procedures, provided the
guidance for the technical problems and evaluation procedures, and reviewed
each evaluation work package report and evaluation technical report.
Consequently, the CB has confirmed that the evaluation results had ensured that
the TOE had satisfied all security functional requirements and assurance
requirements specified in the ST.
Thus the CB has certified that observations and evaluation results made by the
evaluator had been correct and reasonable, and the verdicts assigned by the
evaluator on the product had been correct.
Certification validity: Information in this certification report does not guarantee
that Samsung MFP Security Kit Type_B V1.0 is permitted use or that its quality
is assured by the government of Republic of Korea.
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 2 -
2. TOE Identification
[Table 1] identifies the TOE.
Evaluation
guidance
Korea IT Security Evaluation and Certification Guidance (1 Sep.
2009)
Korea IT Security Evaluation and Certification Scheme (1 Jan.
2010)
TOE Samsung MFP Security Kit Type_B V1.0
Protection
Profile
N/A
Security Target Samsung MFP Security Kit Type_B V1.0 Security Target V1.1
ETR Samsung MFP Security Kit Type_B V1.0 Evaluation Technical
Report V1.0
Evaluation
result
Satisfies CC Part 2
Satisfies CC Part 3
Evaluation
criteria
Common Criteria for Information Technology Security Evaluation
V3.1
Evaluation
methodology
Common Methodology for Information Technology Security
Evaluation V3.1
Sponsor Yoonwoo Lee, the CEO of Samsung Electronics Co., Ltd.
Developer Samsung Electronics Co., Ltd.
Evaluator
Jungdae Kim, Jiyeon Lee
Korea System Assurance, Inc.
Certification
body
IT Security Certification Center
[Table 1] TOE identification
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 3 -
3. Security Policy
The TOE operates in conformance with the following security policies:
P.HIPAA_OPT
In order to keep track of security-relevant actions according to HIPAA policy, the
TOE should precisely leave the job history on record and safely maintain their
security-relevant events, and properly go over the recorded data.
P.SAFE_MANAGEMENT
The TOE should provide a safe management tool on the Web or local user
interface so that only an authorized administrator can manage the TOE in a secure
manner.
4. Assumptions and Scope
4.1 Assumptions
The TOE shall be installed and operated with the following assumptions in
consideration:
A.PHYSICAL_SECURITY
The TOE is protected from unauthorized physical counterfeit/camouflage in the
office environment.
A.TRUSTED_ADMINISTRATOR
The authorized system administrator of the TOE has no malice, has received
education about the TOE administrative functions, and should perform proper
actions according to the proposed manual provided with the TOE. The local
administrator should maintain the PIN and change it at least once every 40 days.
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 4 -
A.TRUSTED_NETWORK
The network connected to the TOE should install a firewall system between the
internal and external network to block attacks from outside.
A.TRUSTED_AUTHENTICATION_SERVER
When the TOE performs client authentication for network scan services via
authentication server, the authenticated server should be safely managed and
provide safe remote authentication through certificated protocol.
A.TIME_STAMP
The environment of the TOE provides reliable time-stamps for accurate audit logs
about the TOE.
A.SSL
SSL protocol is used to serve safe communication between the user’s client PC or
web system administrator’s PC and TOE through a web interface. Therefore, it
provides confidentiality and integrity of data transferred between TOE and the web
system administrator.
4.2 Scope to Counter a Threat
The TOE provides a means appropriate for the IT environment of the TOE to
counter a security threat and a means to take actions on any logical/physical
attacks launched by a threat agent possessing basic expertise, resources, and
motivation.
All security objectives and security policies are described such that a means to
counter identified security threats can be provided.
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 5 -
Option
MFP model
Print Copy NetScan Fax Scan-to
-email
Scan-to
-server
SCX-5835FN
SCX-5935FN
X X X O X X
Specifications SCX-5835FN/SCX-5935FN
LCD 800 x 480 7" WVGA Color Touch-Screen LCD
System Memory 256 MB & optional 256 MB
HDD HDD (80 GB SATA)
F
A
X
Compatibility ITU-T G3
Comm. System PSTN / PABX
Modem Speed 33.6 Kbps
Interface
Hi-Speed USB 2.0,
Ethernet 10 M / 100 M base TX
Etc. Up to 33 ppm in A4 (35 ppm in Letter)
5. TOE Information
[Table 2] and [Table 3] shows the options provided by SAMSUNG MFPs with the
TOE embedded and its hardware specifications respectively.
(X means standard options; O means customized options)
[Table 2] MFP Models and Capabilities
[Table 3] Specifications of the MFPs
The TOE operates in an internal network that is protected by a firewall system from
external attacks. Users can access the TOE by using a local user interface(LUI) on an
LCD of the MFP, Web user interface(WebUI) via a Web browser, Telnet
interface(TelnetUI) through Telnet protocols, or a user client PC.
[Figure 1] shows the logical scope and boundary of the TOE.
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 6 -
[Figure 1] Logical scope of the TOE
▣ Security audit
Only authorized web administrators can download, analyze, and track the
security audit log through the WebUI. The audit log provides a job owner’s
identification, event number, date, time, ID, description, and data to ensure
credibility of the audit log. The TOE generates audit logs that track
events/actions (e.g., print/scan/fax job submission) to users (based on network
login). The audit logs are available to the TOE system administrators and can
be exported for review and analysis. SSL must be configured in order for the
system administrator to download the audit logs; the downloaded audit logs
are in a comma-separated format so that they can be imported into an
application such as Microsoft Excel™
.
▣ Security management
The TOE allows authorized system administrators only to use security
functionality. System administrators can perform operations described below:
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 7 -
[Local system administrator]
• Enable or disable Automatic Image Overwrite and Manual Image Overwrite
• Start or stop Manual Image Overwrite
• Change the local administrator PIN
• Change or inquire the protocol and port
[Web system administrator]
• Configure authentication option for network scan service
• Create/Change/Delete user account for network scan service
• Change ID or password of Web system administrator and Telnet system
administrator
• Enable or disable system audit log
• Download system audit log
• Change or inquire the protocol and port
[Telnet system administrator]
• Change or inquire the protocol and port
▣ System authentication
A local system administrator must be authenticated by entering a PIN prior to
being granted access to the security management functions through the LUI. A
security print user must be authenticated to access stored files on the TOE. A
Web administrator must also be authenticated to change security management
functions. The TOE displays an asterisk for each digit entered by an
administrator or user to hide the value entered. Password combination rules
and authentication failure handling are as follows:
[Local system administrator]
• 4 ~ 8 numerals
• In case of 3 consecutive failed authentication, a beep occurs and
authentication process is delayed for 3 minutes
[Web system administrator]
• At least 1 alphabet and numeral
• 8 ~ 20 characters
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 8 -
• In case of 3 consecutive failed authentication, an error message is sent to the
Web browser session
[Telnet system administrator]
• At least 1 upper case, lower case, and numeral
• 7 ~ 12 characters
• In case of 3 consecutive failed authentication, authentication process is
delayed for 1 minute
[Security print user]
• 4 numerals
• A beep occurs every time authentication fails
▣ Network authentication
To prevent unauthorized use of the network options (netscan, scan-to-email,
and scan-to-server), the TOE requires a user trying to access its network
service to provide an ID and password, which are then validated by the
designated authentication server. Thus, an unauthorized user cannot export
stored files to the outside through network. When wrong PINs are entered 3
times in succession, the authentication process will be delayed for 3 minutes.
▣ Image overwrite
The TOE provides 2 types of image overwrite function: automatic image overwrite,
which automatically overwrites temporary image files created as a result of the
processing of copy/print/scan/PC-fax right after each job has been completed, and
manual image overwrite, which overwrites the HDD partition where user data is
stored. It performs image overwrite function as described in DoD 5200.28-M.
▣ Information flow
The TOE separates its memory into a fax memory that only the fax board can
access and a network memory that only the network port in a main controller can
access. Separation between the PSTN port on the FAX board and the network port
on the main controller board is established through the architectural design of the
main controller software. When using the fax-to-email function, the fax image
received via PSTN line will be transmitted to internal network. When the fax image
is proper data standardized with MMR, MR, or MH of T.4 specification, the TOE
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 9 -
copies the data to the network memory. (If it is not standardized, the TOE deletes
it.) Then the copied fax image is transmitted to the SMTP server through a network
card.
▣ Data access control
The TOE controls access to preserved files in the HDD of the MFP according to the
print options set by a user. Preserved file is divided into two categories, Public and
Secured. When a user stores a document as Public, all users can access and use the
file. A file stored as Secured can only be accessed by the user who stored the file.
When storing a file as Secured, a user must set a PIN required to access the file.
Then the file can only be accessed by entering the PIN on the LUI.
▣ Storage data encryption
The TOE encrypts image data and configuration data on the HDD. After that, the
TOE stores the data on the HDD and it decrypts the stored data to use it. The
cryptographic algorithm used by the TOE is AES algorithm with 256-bit key size.
Each product has its unique key value and stored on the MFP safely so that no one,
not even the administrator, can access and leak the key value to the outside.
▣ Network access control
The TOE can control access to the TOE resources through the network from outside
the TOE by changing the port number and enabling/disabling protocol. An authorized
system administrator configures the protocol and changes the port number on the
LUI, WebUI, or TelnetUI such that only accesses from the specified port are allowed.
The administrator also controls service accesses from outside the TOE by
enabling/disabling protocol.
6. Guidance
The TOE provides the following guidance documents:
- Samsung MFP Security Administrator's Guide Version 2.00 (15 Feb. 2010)
- Network Printer Administrator's Guide Version 2.00 (15 Feb. 2010)
- SCX-5835_5935 Series Multi Function Printer User’s Guide Ver. 1.00 (2009.
10. 27)
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 10 -
7. TOE Test
7.1 Developer's Test
• Test method
The developer has configured the operational environment as described in the
ST, where an MFP with Samsung MFP Security Kit Type_B V1.0 embedded
was installed. Testing security functions was done through the TSFIs and
internal interfaces of subsystems.
• Test coverage
All of the test cases for both functions and subsystems (56 functional tests and 18
subsystem tests) are performed to prove that the developer's test was correct.
• Test results
It is confirmed that the developer's test of all security functions was correct.
7.2 Evaluator's Test
The evaluator has derived test items adding to the developer's to check that the
TOE operates as specified. They are described in the independent testing document
in detail. The evaluator's test has proven that the TOE operates as expected.
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 11 -
8. Evaluation Configuration
The evaluator configured the test environment to be consistent with the developer's
as shown in [Figure 2].
[Figure 2] Developer/evaluator test configuration
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 12 -
9. Evaluation Results
The evaluation is performed with reference to the CC V3.1 and CEM V3.1. The
result claims that the evaluated product satisfies the requirements from the CC
Part 2 and EAL3 in the CC Part 3. Refer to the evaluation technical report for
more details.
• Security Target evaluation (ASE)
The ST introduction uniquely and correctly identifies the ST and TOE reference
and describes the type, usage, major security features, physical and logical scope
of the TOE to the extent of providing a reader general understanding.
Conformance claim includes the version of CC to which the TOE conforms, PP
claim, and package claim and is described in consistent with the TOE type,
security problem definition, and security objectives.
Security problem definition clearly describes the security problems that should be
addressed by the TOE and its operational environment, that is, threats,
organizational security policies(OSPs), and assumptions.
Security objectives counter the identified threats, achieve the OSPs, and address
the assumptions properly and completely. The security problems are defined and
categorized obviously into those for the TOE and for the operational
environment.
The security requirements are described completely and consistently, and
provides an appropriate basis for the development of the TOE to achieve the
security objectives.
The TOE summary specification addresses all security functional requirements
and defines them consistently with other parts of the ST.
Therefore, the ST is complete, consistent, and technically sound, and hence
suitable for use as the basis for the TOE evaluation.
• Life cycle support evaluation (ALC)
The configuration management documentation describes that the changes to the
implementation representation are controlled with the support of automated tools.
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 13 -
It also clearly identifies the TOE and its associated configuration items and
describes that the ability to modify these items is properly controlled.
The evaluator has confirmed by examining the CM documentation that the
developer had performed configuration management at least on the TOE
implementation representation and evaluation evidence required by the assurance
components in the ST.
Therefore, the evaluation of configuration management assists a consumer in
identifying the evaluated TOE, ensures that the configuration items are uniquely
identified, and guarantees the adequacy of the procedures used by the developer
to control and track changes that are made to the TOE.
The delivery documentation describes all procedures used to maintain security
and detect modification or substitution of the TOE when distributing it to the
user's site.
Therefore, the delivery documentation is adequate to ensure that the TOE is
delivered in the same way the developer intended without modification.
The evaluator has confirmed that the developer's security controls on the
development environment had been adequate to provide the confidentiality and
integrity of the TOE design and implementation that are necessary to ensure
secure operation of the TOE; and that the developer had used a documented
life-cycle model for the TOE.
Therefore, the life-cycle support provides an adequate description of the security
procedures used throughout the TOE development and maintenance.
• Development evaluation (ADV)
The security architecture description gives a sufficient description about the
architectural properties of the TSF regarding how the security enforcement of
the TSF cannot be compromised or bypassed and how the security domain
provided by the TSF is separated from other domains.
The functional specification adequately describes all TSFs and explains that they
are sufficient to satisfy the security functional requirements of the ST. It also
adequately describes the TSFIs to the extent that a reader can understand how
the TSF enforces the security functional requirements.
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 14 -
The TOE design provides a description of the TOE in terms of subsystems
sufficient to determine the TSF boundary. It also describes that the SFRs are
completely and accurately implemented in terms of SFR-enforcing,
SFR-supporting, and SFR-non-interfering interfaces.
Therefore, the development documentation is adequate to give understanding
about how the TSFs are provided, as it consists of a functional specification
(which describes the interfaces to the TSF), a TOE design (which describes the
architecture of the TOE in terms of subsystems), and a security architecture
description (which describes how the TSF enforcement cannot be compromised
or bypassed).
• Guidance documents evaluation (AGD)
The TOE being embedded in the MFPs at the time of delivery does not apply
acceptance procedures and thus does not have a preparative procedure document.
The operational user guidance describes how to administer the TOE in a secure
manner.
Therefore, the guidance document gives a suitable description of how a personnel
who installs, manages, and operates can administer the TOE in a secure way.
• Tests evaluation (ATE)
The tests have been sufficient to establish that the TSF had been systematically
tested against the functional specification.
The evaluator has confirmed that the developer had tested the TSFs in the TOE
design.
The developer's test documents had been sufficient to show the security
functions had behaved as specified.
The evaluator has determined, after independently testing a subset of the TSF,
that the TOE had behaved as specified and gained confidence in the developer's
test results by performing all of the developer's tests.
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 15 -
Therefore, the tests have proved that the TSFs had satisfied the TOE security
functional requirements specified in the ST and behaved as specified in the
design documentation.
• Vulnerability assessment evaluation (AVA)
The vulnerability analysis adequately describes the obvious security
vulnerabilities of the TOE and the countermeasures such as the functions
implemented or recommended configuration specified in the guidance
documentation. The evaluator has confirmed by performing independent
vulnerability analysis that the developer's analysis had been correct.
The evaluator has determined by performing vulnerability analysis that there had
not been any vulnerabilities exploitable by an attacker possessing an basic attack
potential in the intended TOE environment.
Therefore, based on the evaluator's vulnerability analysis and penetration testing,
the evaluator has confirmed that there had been no flaws or vulnerabilities
exploitable in the intended environment of the TOE.
10. Recommendations
The TOE is guaranteed security only in the evaluated configuration. Therefore,
one should take the following in consideration while operating the TOE.
① SSL protocol, which is provided by the operational environment for safe
communication between the Web system administrator and the TOE, is
disabled at the initial distribution of the TOE. So a Web system
administrator should register a certificate and enable it before operating
the TOE.
② The TOE is delivered with the default password of the Web system
administrator and local system administrator. A system administrator who
will operate the TOE should first change the password. It is recommended
that Web and local system administrators change the password periodically
for the sake of security.
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 16 -
③ Since the TOE overwrites audit data starting from the oldest one in case of
exhausted audit storage, a security administrator should always check the
storage status and back up the data timely to ensure traceability of
security-relevant events.
11. Acronyms and Glossary
The following are the acronyms used in this report.
CC Common Criteria
CR Certification Report
EAL Evaluation Assurance Level
PP Protection Profile
ST Security Target
TOE Target of Evaluation
TSF TOE Security Functions
TSFI TSF Interface
The following are the terms used in this report.
Multi-Function Printer (MFP)
MFP is a machine that incorporates the functionality of multiple devices (copy,
print, scan, or fax) in one.
System administrator
An authorized user who manages TOE-embedded MFP. It includes local
administrator, web administrator, and Telnet administrator.
Local User Interface (LUI)
An interface for a general user or local system administrator to access, use,
or manage the MFP directly.
Local System administrator
A system administrator to manage Samsung MFP Security Kit Type_B V1.0
through LUI. The main roles are to configure system information and to
check the MFP status for general use. The other roles for security services
Samsung MFP Security Kit Type_B V1.0 Certification Report
- 17 -
are to enable/disable Automatic Image Overwrite/Manual Image Overwrite for
security, start/stop Manual Image Overwrite, and change PINs.
Web User Interface (WebUI)
An interface for a general user or Web system administrator to access, use,
or manage the MFP through a web service.
Web system administrator
A system administrator to manage Samsung MFP Security Kit Type_B V1.0
through WebUI. The main roles are to create/change/delete the information of
network scan service users, manage/change web administrator’s ID and
password, enable/disable security audit function, download security audit logs.
Telnet User Interface (TelnetUI)
An interface for a Telnet system administrator to access, use, or manage the
MFP through Telnet protocols.
Telnet system administrator
A system administrator to manage Samsung MFP Security Kit Type_B V1.0
through TelnetUI. The main roles are to inquire/change the protocol and port
number.
HIPAA(Health Insurance Portability and Accountability Act)
Policy that creates and reviews the records about performed job in system
using hardware, software, and procedural mechanism to monitor potential
violation of security rules.
12. Reference
The certification body has used the following documents to produce this
certification report:
[1] Common Criteria for Information Technology Security Evaluation V3.1
[2] Common Methodology for Information Technology Security Evaluation V3.1
[3] Korea IT Security Evaluation and Certification Guidance (1 Sep. 2009)
[4] Korea IT Security Evaluation and Certification Scheme (1 Jan. 2010)
[5] Samsung MFP Security Kit Type_B V1.0 Security Target V1.1 (25 Mar.
2010)
[6] Samsung MFP Security Kit Type_B V1.0 Evaluation Technical Report V1.0
(31 Mar. 2010)