UNCLASSIFIED / NON CLASSIFIÉ 617-LSS COMMON CRITERIA CERTIFICATION REPORT RICOH IM C2010/C2510/C2519/C3010/C3510/C3519/C 4510/C5510/C6010 version JE-1.00-H 29 June 2023 2 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ FOREWORD This certification report is an UNCLASSIFIED publication, issued under the authority of the Chief, Communications Security Establishment (CSE). The Information Technology (IT) product identified in this certification report, and its associated certificate, has been evaluated at an approved testing laboratory established under the Canadian Centre for Cyber Security (a branch of CSE). This certification report, and its associated certificate, applies only to the identified version and release of the product in its evaluated configuration. The evaluation has been conducted in accordance with the provisions of the Canadian Common Criteria Program, and the conclusions of the testing laboratory in the evaluation report are consistent with the evidence adduced. This report, and its associated certificate, are not an endorsement of the IT product by Canadian Centre for Cyber Security, or any other organization that recognizes or gives effect to this report, and its associated certificate, and no warranty for the IT product by the Canadian Centre for Cyber Security, or any other organization that recognizes or gives effect to this report, and its associated certificate, is either expressed or implied. If your organization has identified a requirement for this certification report based on business needs and would like more detailed information, please contact: Canadian Centre for Cyber Security Contact Centre and Information Services contact@cyber.gc.ca | 1-833-CYBER-88 (1-833-292-3788) 3 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ OVERVIEW The Canadian Common Criteria Program provides a third-party evaluation service for determining the trustworthiness of Information Technology (IT) security products. Evaluations are performed by a commercial Common Criteria Testing Laboratory (CCTL) under the oversight of the Certification Body, which is managed by the Canadian Centre for Cyber Security. A CCTL is a commercial facility that has been approved by the Certification Body to perform Common Criteria evaluations; a significant requirement for such approval is accreditation to the requirements of ISO/IEC 17025, the General Requirements for the Competence of Testing and Calibration Laboratories. By awarding a Common Criteria certificate, the Certification Body asserts that the product complies with the security requirements specified in the associated security target. A security target is a requirements specification document that defines the scope of the evaluation activities. The consumer of certified IT products should review the security target, in addition to this certification report, to gain an understanding of any assumptions made during the evaluation, the IT product's intended environment, the evaluated security functionality, and the testing and analysis conducted by the CCTL. The certification report, certificate of product evaluation and security target are posted to the Common Criteria portal (the official website of the International Common Criteria Program). 4 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ TABLE OF CONTENTS EXECUTIVE SUMMARY .................................................................................................................................... 6 1 Identification of Target of Evaluation ........................................................................................................... 7 1.1 Common Criteria Conformance.......................................................................................................................... 7 1.2 TOE Description................................................................................................................................................. 7 1.3 TOE Architecture ............................................................................................................................................... 8 2 Security Policy......................................................................................................................................... 9 2.1 Cryptographic Functionality ............................................................................................................................... 9 3 Assumptions and Clarification of Scope ......................................................................................................10 3.1 Usage and Environmental Assumptions.............................................................................................................10 3.2 Clarification of Scope .......................................................................................................................................10 4 Evaluated Configuration............................................................................................................................11 4.1 Documentation.................................................................................................................................................12 5 Evaluation Analysis Activities....................................................................................................................13 5.1 Development....................................................................................................................................................13 5.2 Guidance Documents........................................................................................................................................13 5.3 Life-Cycle Support ............................................................................................................................................13 6 Testing Activities ....................................................................................................................................14 6.1 Assessment of Developer tests.........................................................................................................................14 6.2 Conduct of Testing...........................................................................................................................................14 6.3 Independent Testing.........................................................................................................................................14 6.3.1 Independent Testing Results .........................................................................................................................14 6.4 Vulnerability Analysis .......................................................................................................................................15 6.4.1 Vulnerability Analysis Results........................................................................................................................16 7 Results of the Evaluation ..........................................................................................................................17 7.1 Recommendations/Comments..........................................................................................................................17 8 Supporting Content..................................................................................................................................18 8.1 List of Abbreviations.........................................................................................................................................18 5 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 8.2 References.......................................................................................................................................................18 LIST OF FIGURES TOE Architecture..................................................................................................................................................8 LIST OF TABLES Table 1: TOE Identification ................................................................................................................................................7 Table 2: Cryptographic Implementation(s).........................................................................................................................9 6 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ EXECUTIVE SUMMARY RICOH IM C2010/C2510/C2519/C3010/C3510/C3519/C4510/C5510/C6010 version JE-1.00-H (hereafter referred to as the Target of Evaluation, or TOE), from Ricoh Company, Ltd. , was the subject of this Common Criteria evaluation. A description of the TOE can be found in Section 1.2. The results of this evaluation demonstrate that the TOE meets the requirements of the conformance claim listed in Section 1.1 for the evaluated security functionality. Lightship Security is the CCTL that conducted the evaluation. This evaluation was completed on 29 June 2023 and was carried out in accordance with the rules of the Canadian Common Criteria Program. The scope of the evaluation is defined by the Security Target, which identifies assumptions made during the evaluation, the intended environment for the TOE, and the security functional/assurance requirements. Consumers are advised to verify that their operating environment is consistent with that specified in the security target, and to give due consideration to the comments, observations, and recommendations in this Certification Report. The Canadian Centre for Cyber Security, as the Certification Body, declares that this evaluation meets all the conditions of the Arrangement on the Recognition of Common Criteria Certificates and that the product is listed on the Certified Products list (CPL) for the Canadian Common Criteria Program and the Common Criteria portal (the official website of the International Common Criteria Program). 7 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 1 IDENTIFICATION OF TARGET OF EVALUATION The Target of Evaluation (TOE) is identified as follows: Table 1: TOE Identification TOE Name and Version RICOH IM C2010/C2510/C2519/C3010/C3510/C3519/C4510/C5510/C6010 version JE-1.00-H Developer Ricoh Company, Ltd. 1.1 COMMON CRITERIA CONFORMANCE The evaluation was conducted using the Common Methodology for Information Technology Security Evaluation, Version 3.1 Revision 5, for conformance to the Common Criteria for Information Technology Security Evaluation, Version 3.1 Revision 5. The TOE claims the following conformance: Protection Profile for Hardcopy Devices, Version 1.0 Protection Profile for Hardcopy Devices, v1.0, Errata #1 1.2 TOE DESCRIPTION The TOE is a Digital Multi-Function Printer (MFP), which is an IT device that inputs, stores, and outputs electronic and hardcopy documents. 8 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 1.3 TOE ARCHITECTURE A diagram of the TOE architecture is as follows: TOE Architecture 9 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 2 SECURITY POLICY The TOE implements and enforces policies pertaining to the following security functionality:  Security Audit  Cryptographic Support  Access Control  Storage Data Encryption  Identification and Authentication  Administrative Roles  Trusted Operations  TOE Access  Trusted Communications  PSTN Fax-Network Separation  Image Overwrite Complete details of the security functional requirements (SFRs) can be found in the Security Target (ST) referenced in section 8.2. 2.1 CRYPTOGRAPHIC FUNCTIONALITY The following cryptographic implementations are used by the TOE and have been evaluated by the CAVP/CMVP: Table 2: Cryptographic Implementation(s) Cryptographic Module/Algorithm Certificate Number OpenSSL, v1.1.1 A3561 Ricoh Cryptographic Module for IPSec 2, v1.00 A3560 RICOH Cryptographic Library 3, v3.0 A3557 libgwguard, v1.0 A3558 NesLib v6.3.3 for ST33 C928 Nuvoton NPCT7xx TPM 2.0 Cryptographic Engine, vLAG019 A1961 FCU SHA-1 Module, v1.0 A3556 RICOH Cryptographic Library for ima, v1.0 A3559 Libimaevm, v1.0 A3562 GW Linux NVRAM Encryption Library, v1.0 A3555 AES256CBC, vMB8AL1062MH-GE1 AES 3921 wolfCrypt, v4.7.0i A3028 10 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 3 ASSUMPTIONS AND CLARIFICATION OF SCOPE Consumers of the TOE should consider assumptions about usage and environmental settings as requirements for the product’s installation and its operating environment. This will ensure the proper and secure operation of the TOE. 3.1 USAGE AND ENVIRONMENTAL ASSUMPTIONS The following assumptions are made regarding the use and deployment of the TOE:  Physical security, commensurate with the value of the TOE and the data it stores or processes, is assumed to be provided by the environment.  The Operational Environment is assumed to protect the TOE from direct, public access to its LAN interface 3.2 CLARIFICATION OF SCOPE The following features of the MFP are excluded from the evaluated configuration: USB Port.  The MFP has a USB Port that is used to directly connect a client computer to the MFP for printing. This USB port is disabled during initial installation and configuration of the TOE. SD Card Slot.  The MFP has two SD Card Slots, one for customer engineers and one for users. The SD Card Slot for customer engineer is used by customer engineers to install components of the MFP; the SD Card Slot for users is used by users to print documents. Both are disabled when the TOE is operational, a cover is placed on the SD Card slot for customer engineer so cards cannot be inserted or removed and the card slot for users is set to disabled during installation. 11 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 4 EVALUATED CONFIGURATION The evaluated configuration for the TOE comprises: TOE Software/Firmware JE-1.00-H TOE Hardware IM C2010 IM C2010A IM C2010ALT IM C2010G IM C2010LT IM C2510 IM C2510A IM C2510ALT IM C2510G IM C2510LT IM C2519J IM C3010 IM C3010A IM C3010ALT IM C3010G IM C3010LT IM C3510 IM C3510A IM C3510ALT IM C3510G IM C3510LT IM C3519J IM C4510 IM C4510A IM C4510ALT IM C4510G IM C4510LT IM C5510 IM C5510ALT IM C5510A IM C5510LT IM C6010 IM C6010G IM C6010LT RICOH IM C2010 RICOH IM C2010F RICOH IM C2010FLT RICOH IM C2510 RICOH IM C2510F RICOH IM C2510FLT RICOH IM C3010 RICOH IM C3010F RICOH IM C3010FLT RICOH IM C3510 RICOH IM C3510F RICOH IM C3510FLT RICOH IM C4510 RICOH IM C4510A RICOH IM C4510F RICOH IM C4510FLT RICOH IM C5510 RICOH IM C5510A RICOH IM C5510F RICOH IM C5510FLT RICOH IM C6010 RICOH IM C6010F RICOH IM C6010FLT Environmental Support  Syslog Server  LDAP Server  NTP Server  FTP Server  SMTP Server 12 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 4.1 DOCUMENTATION The following documents are provided to the consumer to assist in the configuration and installation of the TOE: a) User Guide IM C2010/C2010A/C2510/C2510A/C3010/ C3010A/C3510/C3510A/C4510/C4510A/C5510/C5510A/C6010 , 2023/2, D0E3-7529 b) User Guide Security Reference, 2023/2, D0E3-7534 c) RICOH IM C2010/C2510/C2519/C3010/C3510/C3519/C4510/C5510/C6010, version JE-1.00-H Common Criteria Guide, June 2023, version 1.1, D0E3-7532 13 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 5 EVALUATION ANALYSIS ACTIVITIES The evaluation analysis activities involved a structured evaluation of the TOE. Documentation and process dealing with Development, Guidance Documents, and Life-Cycle Support were evaluated. 5.1 DEVELOPMENT The evaluators analyzed the documentation provided by the vendor; they determined that the design completely and accurately describes the TOE security functionality (TSF) interfaces and how the TSF implements the security functional requirements. The evaluators determined that the initialization process is secure, that the security functions are protected against tamper and bypass, and that security domains are maintained. 5.2 GUIDANCE DOCUMENTS The evaluators examined the TOE preparative user guidance and operational user guidance and determined that it sufficiently and unambiguously describes how to securely transform the TOE into its evaluated configuration and how to use and administer the product. The evaluators examined and tested the preparative and operational guidance and determined that they are complete and sufficiently detailed to result in a secure configuration. Section 4.1 provides details on the guidance documents. 5.3 LIFE-CYCLE SUPPORT An analysis of the TOE configuration management system and associated documentation was performed. The evaluators found that the TOE configuration items were clearly marked. The evaluators examined the delivery documentation and determined that it described all the procedures required to maintain the integrity of the TOE during distribution to the consumer. 14 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 6 TESTING ACTIVITIES Testing consists of the following three steps: assessing developer tests, performing independent tests, and performing a vulnerability analysis. 6.1 ASSESSMENT OF DEVELOPER TESTS The evaluators verified that the developer has met their testing responsibilities by examining their test evidence, and reviewing their test results, as documented in the Evaluation Test Report (ETR). The correspondence between the tests identified in the developer’s test documentation and the functional specification was complete. 6.2 CONDUCT OF TESTING The TOE was subjected to a comprehensive suite of formally documented, independent functional and penetration tests. The detailed testing activities, including configurations, procedures, test cases, expected results and observed results are documented in a separate Test Results document. 6.3 INDEPENDENT TESTING During this evaluation, the evaluator developed independent functional & penetration tests by examining design and guidance documentation. All testing was planned and documented to a sufficient level of detail to allow repeatability of the testing procedures and results. The following testing activities were performed: a. PP Assurance Activities: The evaluator performed the assurance activities listed in the claimed PP b. Cryptographic Implementation Verification: The evaluator verified that the claimed cryptographic implementations were present in the TOE. 6.3.1 INDEPENDENT TESTING RESULTS The developer’s tests and the independent tests yielded the expected results, providing assurance that the TOE behaves as specified in its ST and functional specification. 15 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 6.4 VULNERABILITY ANALYSIS The vulnerability analysis focused on 4 flaw hypotheses.  Public Vulnerability based (Type 1)  Technical community sources (Type 2)  Evaluation team generated (Type 3)  Tool Generated (Type 4) The evaluators conducted an independent review of all evaluation evidence, public domain vulnerability databases and technical community sources (Type 1 & 2). Additionally, the evaluators used automated vulnerability scanning tools to discover potential network, platform, and application layer vulnerabilities (Type 4). Based upon this review, the evaluators formulated flaw hypotheses (Type 3), which they used in their vulnerability analysis. Type 1 & 2 searches were conducted on 12 June 2023 and included the following search terms: TOE Models and Firmware (See Section 4) LPUX6.0 OS (customized Linux v4.14) WolfCrypt v4.7.0 WolfSSL v4.7.0 OpenSSL 1.1.1 Web Image Monitor version 1.07 RICOH Cryptographic Library for ima RICOH Cryptographic Library 3 RICOH Cryptographic Module for IPSec 2 Intel Atom x5-E3930 Intel Atom x5-E3940 Intel Atom x7-A3950 Intel Celeron N3350 ARM Cortex-A57 Dual Core MB8AL1062MH-GE1 ST33HTPH2X32AHD8 ST33TPHF2XSPI STMicroelectronics NPCT760AABYX Nuvoton Libgwguard Libimaevm GW Linux NVRAM Encryption Library FCU SHA-1 Module 16 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ Vulnerability searches were conducted using the following sources: Ricoh Security Bulletins: https://www.ricoh.com/products/security/mfp/bulletins/ Ricoh Information page: https://www.ricoh.com/info/ NIST National Vulnerabilities Database (NVD): https://nvd.nist.gov/vuln/search Common Vulnerabilities and Exposures: http://cve.mitre.org/cve/ CISA - Known Exploited Vulnerabilities Catalog: https://www.cisa.gov/known-exploited-vulnerabilities-catalog CCCS – Alerts and advisories: https://cyber.gc.ca/en/alerts-advisories Google https://google.ca 6.4.1 VULNERABILITY ANALYSIS RESULTS The vulnerability analysis did not uncover any security relevant residual exploitable vulnerabilities in the intended operating environment. 17 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 7 RESULTS OF THE EVALUATION The Information Technology (IT) product identified in this certification report, and its associated certificate, has been evaluated at an approved testing laboratory established under the Canadian Centre for Cyber Security. This certification report, and its associated certificate, apply only to the specific version and release of the product in its evaluated configuration. This evaluation has provided the basis for the conformance claim documented in Table 1. The overall verdict for this evaluation is PASS. These results are supported by evidence in the ETR. 7.1 RECOMMENDATIONS/COMMENTS It is recommended that all guidance outlined in Section 4.1 be followed to configure the TOE in the evaluated configuration. The evaluated RICOH IM series printers are high-quality multi-function print, copy, fax and scanning devices with security features consistent with the Protection Profile they claim conformance with. Of particular note, the evaluator found that RICOH is a highly mature organization operating with integrity in regard to Common Criteria: they value the process and the results. The end-users should follow the instructions in RICOH IM C2010/C2510/C2519/C3010/C3510/C3519/C4510/C5510/C6010 Common Criteria Guide for secure setup and operation of the TOE. 18 TLP:WHITE UNCLASSIFIED / NON CLASSIFIÉ 8 SUPPORTING CONTENT 8.1 LIST OF ABBREVIATIONS Term Definition CAVP Cryptographic Algorithm Validation Program CCTL Common Criteria Testing Laboratory CMVP Cryptographic Module Validation Program CSE Communications Security Establishment EAL Evaluation Assurance Level ETR Evaluation Technical Report IT Information Technology ITS Information Technology Security PP Protection Profile SFR Security Functional Requirement ST Security Target TOE Target of Evaluation TSF TOE Security Function 8.2 REFERENCES Reference Common Criteria for Information Technology Security Evaluation, Version 3.1 Revision 5, April 2017. Common Methodology for Information Technology Security Evaluation, CEM, Version 3.1 Revision 5, April 2017. Security Target RICOH IM C2010/C2510/C2519/C3010/C3510/C3519/C4510/C5510/C6010, version JE-1.00-H, 28 June 2023, v0.12 Evaluation Technical Report RICOH IM C2010/C2510/C2519/C3010/C3510/C3519/C4510/C5510/C6010, version JE-1.00-H, 29 June 2023, v0.9 Assurance Activity Report RICOH IM C2010/C2510/C2519/C3010/C3510/C3519/C4510/C5510/C6010, version JE-1.00-H, 29 June 2023, v0.9