Certification Report
EAL 4+ (ALC_DVS.2) Evaluation of
TÜBİTAK BİLGEM
Protection Profile for Application Firmware of
Secure Smartcard Reader for
National Electronic Identity Verification System
issued by
Turkish Standards Institution
Common Criteria Certification Scheme
Certificate Number: 21.0.03/TSE-CCCS/PP-010
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 2/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
TABLE OF CONTENTS
TABLE OF CONTENTS..................................................................................................................................................................2
Document Information .......................................................................................................................................................................... 3
Document Change Log ......................................................................................................................................................................... 3
DISCLAIMER ...................................................................................................................................................................................... 3
FOREWORD ........................................................................................................................................................................................ 4
RECOGNITION OF THE CERTIFICATE .......................................................................................................................................... 5
1 - EXECUTIVE SUMMARY.................................................................................................................................................................6
2 CERTIFICATION RESULTS ..............................................................................................................................................................10
2.1 PP Identification............................................................................................................................................................................ 10
2.2 Security Policy .............................................................................................................................................................................. 10
2.3 Assumptions and Clarification of Scope ....................................................................................................................................... 11
2.4 Architectural Information.............................................................................................................................................................. 13
2.5 Security Functional Requirements ................................................................................................................................................ 16
2.6 IT Security Assurance Requirements ............................................................................................................................................ 17
2.7 Results of the Evaluation............................................................................................................................................................... 17
2.8 Evaluator Comments / Recommendations .................................................................................................................................... 17
3 PP DOCUMENT ............................................................................................................................................................................18
4 GLOSSARY & ACRONYMS.............................................................................................................................................................19
5 BIBLIOGRAPHY.............................................................................................................................................................................21
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 3/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
Document Information
Date of Issue 30.11.2015
Version of Report v1.0
Author Cem ERDİVAN
Technical Responsible Zümrüt MÜFTÜOĞLU
Approved Mariye Umay AKKAYA
Date Approved 03.12.2015
Certification Report Number 21.0.03/15-002
Sponsor and Developer TÜBİTAK BİLGEM
Evaluation Lab TÜBİTAK BİLGEM OKTEM
PP Name Protection Profile for Application Firmware of Secure
Smartcard Reader for National Electronic Identity Verification
System v2.5
Pages 21
Document Change Log
Release Date Pages Affected Remarks/Change Reference
1.0 30.11.2015 All First Release
DISCLAIMER
This certification report and the PP defined in the associated Common Criteria document has been evaluated at
an accredited and licensed evaluation facility conformance to Common Criteria for IT Security Evaluation,
version 3.1,revision 4, using Common Methodology for IT Products Evaluation, version 3.1, revision 4. This
certification report and the associated Common Criteria document apply only to the identified version and
release of the PP in its evaluated configuration. Evaluation has been conducted in accordance with the
provisions of the CCCS, and the conclusions of the evaluation facility in the evaluation report are consistent
with the evidence adduced. This report and its associated Common Criteria document are not an endorsement
of the PP by the Turkish Standardization Institution, or any other organization that recognizes or gives effect to
this report and its associated Common Criteria document, and no warranty is given for the PP by the Turkish
Standardization Institution, or any other organization that recognizes or gives effect to this report and its
associated Common Criteria document.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 4/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
FOREWORD
The Certification Report is drawn up to submit the Certification Commission the results and evaluation
information upon the completion of a Common Criteria evaluation service performed under the Common
Criteria Certification Scheme. Certification Report covers all non-confidential security and technical
information related with a Common Criteria evaluation which is made under the ITCD Common Criteria
Certification Scheme. This report is issued publicly to and made available to all relevant parties for reference
and use.
The Common Criteria Certification Scheme (CCSS) provides an evaluation and certification service to ensure
the reliability of Information Security (IS) products. Evaluation and tests are conducted by a public or
commercial Common Criteria Evaluation Facility (CCTL) under CCCS’ supervision.
CCEF is a facility, licensed as a result of inspections carried out by CCCS for performing tests and evaluations
which will be the basis for Common Criteria certification. As a prerequisite for such certification, the CCEF
has to fulfill the requirements of the standard ISO/IEC 17025 and should be accredited by accreditation bodies.
The evaluation and tests related with the concerned PP have been performed by TÜBİTAK BİLGEM OKTEM,
which is a public CCTL.
A Common Criteria Certificate given to a PP means that such PP meets the security requirements defined in its
PP document that has been approved by the CCCS. The PP document is where requirements defining the scope
of evaluation and test activities are set forth. Along with this certification report, the user of the PP should also
review the PP document in order to understand any assumptions made in the course of evaluations, the
environment where the PP will run, security requirements of the PP and the level of assurance provided by the
PP.
This certification report is associated with the Common Criteria Certificate issued by the CCCS for Protection
Profile for Application Firmware of Secure Smartcard Reader for National Electronic Identity Verification
System v2.4 whose evaluation was completed on 13.11.2015 and whose evaluation technical report was drawn
up by TÜBİTAK BİLGEM OKTEM, and with the PP document with version no 2.5 of the relevant product.
The certification report, certificate of PP evaluation and PP document are posted on the ITCD Certified
Products List at bilisim.tse.org.tr portal and the Common Criteria Portal (the official web site of the Common
Criteria Project).
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 5/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
RECOGNITION OF THE CERTIFICATE
The Common Criteria Recognition Arrangement logo is printed on the certificate to indicate that this certificate
is issued in accordance with the provisions of the CCRA.
The CCRA has been signed by the Turkey in 2003 and provides mutual recognition of certificates based on the
CC evaluation assurance levels up to and including EAL4. The current list of signatory nations and approved
certification schemes can be found on:
http://www.commoncriteriaportal.org.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 6/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
1 - EXECUTIVE SUMMARY
This report constitutes the certification results by the certification body on the evaluation results applied with requirements of the
Common Criteria for Information Security Evaluation.
Evaluated IT product name: Protection Profile for Application Firmware of Secure Smartcard Reader for National Electronic
Identity Verification System
IT Product version: v2.5
Developer’s Name: TÜBİTAK BİLGEM
Name of CCTL: TÜBİTAK BİLGEM OKTEM
Assurance Package: EAL4+ (ALC_DVS.2)
Completion date of evaluation: 13.11.2015
1.1 Brief Description
The TOE is the Secure Smartcard Reader (SSR) Application Firmware running on SSR Device. The SSR is the identity verification
terminal for the National eID Verification System (eIDVS). As the application firmware of the SSR, the TOE performs identity
verification of Service Requester and Service Attendee according to the eIDVS, securely communicating with the other system
components and as a result of the identity verification, produces an Identity Verification Assertion (IVA) signed by the Secure Access
Module (SAM) inside the SRR. The root certificates used for the identification & authentication purposes are also covered by the
TOE.
This Protection Profile supports TOE on three different operational environments. Operation environment is the SSR Hardware and
SSR User Environment including the other parties that SSR communicates to the SSR Application Firmware.
Properties of the three operational environments are compared in Table 1.
Table 1. Comparison of SSR types
Type I Type II Type III
User Interface of SSR
Device
Pinpad,
Display,
One smartcard slot,
Biometric sensor
(internal, external or does
not exist)
External pinpad
(optional)
Pinpad,
Display,
Two smartcard slots,
Biometric sensor
(internal, external or does
not exist)
External pinpad
(optional)
Pinpad,
Display,
One or two smartcard
slots,
Biometric sensor
(internal, external or does
not exist)
External pinpad
(optional)
Service Provider Client
Application (SPCA)
Running on PC Running on PC Included in the TOE
SSR Access Server
(SAS)
N/A Optional N/A
Communication
Environment of SSR
SSR communicates to
Service Provider Client
Application (SPCA)
through USB Interface.
SPCA communicates to
Identity Verification
Policy Server (IVPS) /
Application Server
(APS)/ Online Certificate
Status Protocol Server
(OCSPS).
SSR communicates to
Service Provider Client
Application through USB
interface or
communicates to SAS
through Ethernet
interface. SPCA or SAS
communicates to IVPS /
APS/ OCSPS.
SSR directly
communicates to IVPS /
APS/ OCSPS through
wireless interface.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 7/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
Service Attendee
Support
N/A Yes Optional
Secure Upgrade Yes Yes Yes
Optional Online/Offline
Mode
Offline Certificate
Validation using
Certificate Revocation
List when the OCSP
Server isn’t reached
Offline Certificate
Validation using
Certificate Revocation
List when the OCSP
Server isn’t reached
Offline Certificate
Validation using
Certificate Revocation
List when the OCSP
Server isn’t reached
Storing Identity
Verification Assertions
when the connection is
failed
There are two offline use cases:
(i) offline revocation list control and
(ii) offline IVA generation & storage.
In first use case, only the certificate status control is performed offline, other identity verification steps are performed online. As it is
explained in Table 1, this use case could be included in all three types of SSR Devices when OCSPS could not be reached. On the
other hand, the second use case is an option only for SSR Type III Devices. If the SSR type III Device has the offline IVA generation
and storage mode, the IVA can be generated and stored within the SSR when the SSR can not reach to the APS. The confidentiality
and the integrity of the IVAs shall be assured during storage.
1.2 TOE Security Functions
The following security mechanisms are primarily mediated in the TOE:
 Identification and Authentication,
 Cardholder verification by using PIN and biometrics (fingerprint, finger vein, or palm vein data).
 Authentication of eID Card by the TOE,
 Authentication of Role Holder by eID Card and by the TOE,
 Authentication of SAM by the TOE and by eID Card,
 Authentication of theTOE by SAM and by Card Holder (Service Requester and Service Attendee) and by external
entities (e.g. EPP, EBS, Role Holder, etc.),
 Secure Communication between the TOE and
 SAM
 eID Card
 Role Holder
 other trusted IT Components
 Security Management,
 Self-Protection,
 Audit.
Among the certificates used in the Turkish eID Verification System, certificates of the root CA, device management CA and eID
management CA are included in the TOE.
1.3 Threats
1. T.Counterfeit_eIDC: An attacker (Identity Faker) may present a counterfeit eID Card (form of illegitimate eID Card) to the
TOE for faking his or her identity. This action is also regarded as damaging the correct operation of the Identification and
Authentication of the Service Requester and the Service Attendee.
2. T.Revoked_eIDC: An attacker (Identity Faker) may present a revoked eID Card (form of illegitimate eID Card) to the TOE
for faking his or her identity. This action is also regarded as damaging the correct operation of the Identification and
Authentication of the Service Requester and the Service Attendee.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 8/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
3. T.Stolen_eIDC: An attacker (Identity Faker) may present a stolen (not an illegitimate eID Card) to the TOE for faking his or
her identity. This action is also regarded as damaging the correct operation of the Identification and Authentication of the
Service Requester and the Service Attendee.
4. T.IVA_Fraud: An attacker may create a fraudulent Identity Verification Assertion IVA (totally fake, build from scratch, or
modified from a legitimate IVA).
5. T.IVA_Eavesdropping: The attacker may obtain Identity Verification Assertion by monitoring the communication line
between Identity Verification Server and the Application Server or the communication line between Application Server and
the Connected part (Service Provider Client Application for Type I, SPCA and SAS for Type II and TOE for Type III).
6. T.IVA_Confidentiality_Integrity (valid only for offline mode of TOE on SSR Type III): An attacker may steal or
change the IVAs stored in the SSR Type III memory area during the offline operation of the SSR Type III.
7. T.Repudiation: The Service Requester (or the Service Attendee) may repudiate the Identification Verification Assertion.
8. T.Fake_TOE_to_SR: An attacker may prepare a fake SSR Hardware and introduce it to the Service Requesters (and/or
Service Attendee). This way, the attacker may collect the Identity Verification Card-PIN and Biometric Information.
9. T.Fake_TOE_to_External_Entities: An attacker may introduce himself/herself as legitimate TOE to the external entities:
eID Card, External Biometric Sensor, External PIN Pad. Thus obtain the PIN and biometric information of the Service
Requester (or the Service Attendee) and gain access to eID Card on behalf of the Role Holder.
10. T.SA_Masquerader: An attacker may act as if he/she is a legitimate service attendee and perform the photo verification and
thus damage the Identification and Authentication Service of the Service Requester.
11. T.SA_Abuse_of_Session: An attacker may abuse the service attendee’s authentication session. Thus the attacker can
validate the photo and/or accept negative result of biometric verification in an unauthorized way. This action therefore is
regarded as damaging the correct operation of the Identification and Authentication of the Service Requester and the Service
Attendee.
12. T.Fake_Policy: An attacker may send a fraudulent policy to manage the authentication process in an unauthorized manner.
This action is also regarded as damaging the correct operation of the Identification and Authentication of the SA and the SR.
13. T.Fake_OCSP_Response: An attacker may mimic a legitimate Online Certificate Status Protocol Server (OCSPS) or
manipulate the TSF Data transmitted by OCSPS. This action is also regarded as damaging the correct operation of the
Identification and Authentication of the SA and the SR.
14. T.RH_Comm: An attacker may access or modify the eID Card contents through eavesdropping and manipulating the
communication between the Role Holder and eID Card.
15. T.RH_Session_Hijack: An attacker may access or modify the eID Card contents through hijacking the authentication
session between the eID Card and the Role Holder.
16. T.Illegitimate_EBS: An attacker may change the outcome of biometric verification or steal or modify the transmitted
biometric template, thus collect biometric information from the Cardholders or damage the correct operation of the
Identification and Authentication of Service Requester or Service Attendee by using an illegitimate biometric sensor.
17. T.EBS_Comm: An attacker may change the outcome of biometric verification; steal or modify the transmitted biometric
template, thus collect biometric information from the Cardholders or damage the correct operation of the Identification and
Authentication of Service Requester or Service Attendee through
a. eavesdropping and modifying the communication;
b. hijacking or replaying the authentication session between the TOE and the EBB.
18. T.Illegitimate_EPP: An attacker may change the outcome of PIN verification or steal or modify the transmitted PIN, thus
collect PIN information from the Cardholders or damage the correct operation of the Identification and Authentication or
Service Requester of Service Attendee by using an illegitimate external PIN-PAD.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 9/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
19. T.EPP_Comm: An attacker may steal or modify the transmitted PIN, thus collect PIN information from the Cardholders or
damage the correct operation of the Identification and Authentication of Service Requester or Service Attendee through (1)
eavesdropping and modifying the communication; (2) hijacking or replaying the authentication session between SSR and
EPP.
20. T.eIDC_Comm: An attacker may access or modify the eID Card contents, steal the PIN and biometric information, block
the PIN and biometric verification through (1) eavesdropping and modifying the communication; (2) hijacking or replaying
the authentication session between the TOE and eID Card.
21. T.Illegitimate_SAS: An attacker may use illegitimate SSR Access Server (SAS) to undermine security policies. This action
is also regarded as damaging the correct operation of the Identification and Authentication of third party IT Components for
TOE on SSR Type II.
22. T.Illegitimate_APS: An attacker may use illegitimate Application Server (APS) to undermine security policies. This action
is also regarded as damaging the correct operation of the Identification and Authentication of third party IT Components for
TOE on SSR Type III.
23. T.DTN_Change: An attacker may change the Device Tracking Number of the TOE through physically gaining access to the
memories. This also damage the correctness of the IVA generated by the TOE.
24. T.SAM-PIN_Theft: An attacker may read or change the SAM-PIN of the TOE during normal operation by physically
accessing the SAM PIN memory area or while TOE is entering the SAM PIN, i. e. sending the SAM PIN to the SAM.
25. T.Audit_Data_Compromise: An attacker may change or delete the audit data by physically accessing the audit memory
area.
26. T.TOE_Manipulation: An attacker may manipulate the operation or probe the internals of the SSR. SAM PIN could be
obtained by probing the internals of the SSR, or DTN or Audit data could be manipulated. In addition, a counterfeit Identity
Verification Assertion could be created.
27. T.Fake_SAM: An attacker may issue a fake SAM to obtain the SAM-PIN.
28. T.Stolen_SAM: An attacker may steal a SAM and use it to build an illegitimate SSR.
29. T.Revoked_SAM: An attacker may use a Revoked SAM to build an illegitimate SSR.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 10/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
2 CERTIFICATION RESULTS
2.1 PP Identification
Certificate Number 21.0.03/TSE-CCCS/PP-010
PP Name and Version Protection Profile for Application Firmware of Secure Smartcard
Reader for National Electronic Identity Verification System v2.5
PP Document Title Protection Profile for Application Firmware of Secure Smartcard
Reader for National Electronic Identity Verification System
PP Document Version v2.5
PP Document Date 09.11.2015
Assurance Level EAL4+ (ALC_DVS.2)
Criteria  Common Criteria for Information Technology Security
Evaluation, Part 1: Introduction and General Model;
CCMB-2012-09-001, Version 3.1, Revision 4, September
2012
 Common Criteria for Information Technology Security
Evaluation, Part 2: Security Functional Components;
CCMB-2012-09-002, Version 3.1 Revision 4, September
2012
 Common Criteria for Information Technology Security
Evaluation, Part 3: Security Assurance Components;
CCMB-2012-09-003, Version 3.1 Revision 4, September
2012
Methodology Common Criteria for Information Technology Security
Evaluation, Evaluation Methodology; CCMB-2012-09-004,
Version 3.1, Revision 4, September 2012
Protection Profile Conformance None
Common Criteria Conformance  Common Criteria for Information Technology Security
Evaluation, Part 1: Introduction and General Model,
Version 3.1, Revision 4, September 2012
 Common Criteria for Information Technology Security
Evaluation, Part 2: Security Functional Components,
Version 3.1, Revision 4, September 2012, extended.
 Common Criteria for Information Technology Security
Evaluation, Part 3: Security Assurance Components,
Version 3.1, Revision 4, September 2012, conformant.
Sponsor and Developer TÜBİTAK BİLGEM
Evaluation Facility TÜBİTAK BİLGEM OKTEM
Certification Scheme TSE CCCS
2.2 Security Policy
1. P.IVM_Management: The TOE shall apply the identity verification methods defined by the IVPS. Otherwise if IVPS is not
present, identity verification methods defined by the SPCA shall be applied. In absence of those, the TOE shall apply the
default policy which has the highest security level
2. P.TOE_Upgrade: The TOE will have mechanisms for secure field upgrade.
3. P.Re-Authentication: Authentication of third party IT components will be renewed after 24 hours.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 11/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
4. P.Terminal_Cert_Update: Terminal Certificate will be renewed within a period defined in TS 13584 [3]. Client
application (for TOE on SSR type I or II), SSR Access Server (for TOE on Type II with SAS) or Application Server (for
TOE on SSR Type III) shall update the Secure Messaging and Role Card Verifiable Certificates of SAM one day before the
expiration day.
5. P.Time_Update: The time shall be updated using the real time that is received only from trusted entities.
6. P.Offline_Operation: In case SSR Device cannot reach to OCSP Server, downloading the Revocation List onto the SSR
Device and checking the certificate revocation status of the Service Requester (and the Service Attendee if applicable) from
this list is allowed. The revocation list shall be up to date. When the certificate revocation check is carried out without OCSP
Server, the information regarding that OCSP check could not be realized shall be put in the IVA. If the OCSP Server is not
reached and there is no downloaded revocation list, then the information that OCSP check and revocation list control could
not be realized shall be put in the IVA. In this case, only the certificate status control is performed offline, other identity
verification steps shall be performed online. Unless IVA is validated at IVS and revocation check is completed, Identity
Verification is not regarded as completed.
Additionally, in cases when the SSR Type III (mobile SSR) cannot reach to Application Server, TOE on SSR Type III is
allowed to operate offline for at most maximum offline working time which is defined by the authorized foundation. IVAs
shall be stored on the SSR Device securely and transmitted to APS before this time.
7. P.DPM: The TOE shall support Initialization & Configuration and Operation lifecycle phases. The phase change shall be
from Initialization & Configuration Phase to Operation Phase except tamper event detection case. If a tamper event is
detected, TOE shall be out of service and require re-initialization. This shall be the only condition to go back to Initialization
& Configuration Phase.
DTN and SAM PIN shall be written to the SSR Device during Initialization & Configuration Phase.
2.3 Assumptions and Clarification of Scope
1. A.SPCA: It is assumed that Service Provider Client Application is a trusted third party and its communication with SSR
occurs in a secure environment via USB interface. However, for SSR Type II with SAS, there is no direct connection
between the SSR and the SPCA, SPCA communicates to the SAS through Ethernet interface.
When the Service Provider Client Application determines the identity verification method, it is assumed that the Service
Provider Client Application selects the appropriate method.
In addition, integrity and the confidentiality of the private data transferred from SSR Device to the Client Application is
preserved by the foundation sustaining the Client Application.
2. A.IVPS: It is assumed that the IVPS prepares and sends the policy correctly.
3. A.EBS-EPP: It is assumed that legitimate External Biometric Sensor (EBS) and legitimate External Pin Pad (EPP) work
correctly.
4. A.PC: It is assumed that the PC executing the Client Application is malicious code free and located in secure environment.
In addition, the confidentiality of the private data that might be written into the IVA by the Application Owner as
Application Specific Data is preserved by the Application Owner.
5. A.APS-IVPS: It is assumed that the Application Server and the Identity Verification Policy Server are malicious code free
and located in secure environment.
6. A.Management_Environment: It is assumed that the environments, where initialization and configuration are performed,
are secure. And the personal that hold initialization and configuration roles act responsively.
7. A.SAM_ PIN_Environment: It is assumed that the PIN value of the SAM in the SSR is defined in the SSR in secure
environment.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 12/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
Threats, OCPs and assumptions defined in the Security Problem Definition are matched with the three types of the SSR Device in
Table .
Table 2. Relevance of Threats, OSPs and Assumptions to the three TOE types
Security Problem Definition Applies to
T.Revoked_eIDC Applies to all
T.Stolen_eIDC Applies to all
T.IVA_Fraud Applies to all
T.IVA_Eavesdropping Applies to all
T.IVA_Confidentiality_Integrity Applies to TOE on SSR Type III with offline mode feature
T.Repudiation Applies to all
T.Fake_TOE_to_SR Applies to all
T.Fake_TOE_to_External_Entities Applies to all
T.SA_Masquerader Applies to TOE on SSR Type II and Type III
T.SA_Abuse_of_Session Applies to TOE on SSR Type II and Type III
T.Fake_Policy Applies to all
T.Fake_OCSP_Response Applies to all
T.RH_Comm Applies to all
T.RH_Session_Hijack Applies to all
T.Illegitimate_EBS Applies to TOE on SSR with External Biometric Sensor
T.EBS_Comm Applies to TOE on SSR with External Biometric Sensor
T.Illegitimate_EPP Applies to TOE on SSR with External Pin Pad
T.EPP_Comm Applies to TOE on SSR with External Pin Pad
T.eIDC_Comm Applies to all
T.Illegitimate_SAS Applies to TOE on SSR Type II
T.Illegitimate_APS Applies to TOE on SSR Type III
T.DTN_Change Applies to all
T.SAM-PIN_Theft Applies to all
T.Audit_Data_Compromise Applies to all
T.TOE_Manipulation Applies to all
T.Fake_SAM Applies to all
T.Stolen_SAM Applies to all
T.Revoked_SAM Applies to all
P.TOE_Update Applies to all
P.Re-Authentication Applies to all
P.Terminal_Cert_Update Applies to all
P.Time_Update Applies to all
P.Offline_Operation
Applies to TOE on SSR Type I, Type II and Type III but
differently.
A.SPCA Applies to all
A.IVPS Applies to all
A.EBS-EPP Applies to TOE on SSR with EBS and/or EPP
A.PC Applies to all
A.APS-IVPS Applies to all
A.Management_Environment Applies to all
A.SAM PIN_Environment Applies to all
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 13/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
2.4 Architectural Information
1-Operational Environment for SSR Type I
13. Identity Verification Assertion (IVA)
Validation Request
SSR
Type I
OCSP Server
PKI Center
IVPS
15. Identity Verification Assertion (IVA)
Validation Response
Identity Verifier
Application Server
14. Certificate Status
Identity Verification Server
(IVS)
2. Card Insertion Request (for SR)
3. eID Card
9. PIN-Biometrics Request (for SR)
10. PIN-Biometrics
11. Identity Verification Assertion
(IVA)
1. Identity Verification Request
4. Identity Verification Specification
(IVSP)
Service Provider
Service Provider
Client Application
(SPCA)
Service
Requester
7. Identity Verification Policy (IVP)
Figure 1. User Environment of Type I
The following scenario explains how Type I devices perform Identity Verification Operation in the environment shown in Figure 1.
Operation is initiated by the Service Provider Client Application (SPCA) which is installed on a personal computer (PC).
First, SPCA sends an Identity Verification Request to TOE. Once the TOE receives this request, it asks the SR to insert his/her eID
card into the smartcard slot. After the eID card is inserted, the TOE sets up a secure messaging session with the eID card. Having read
the cardholder‘s personal message from the eID card, the TOE displays it on the screen for the SR’s approval. If the displayed
message is approved by the SR, an Identity Verification Specification (IVSP), is generated by the TOE, and sent to SPCA. Next,
SPCA connects to the Identity Verification Policy Server (IVPS) and gets the Identity Verification Policy (IVP) for the SR specified
in the IVSP. After that, SPCA sends the IVP to the TOE. Since the policy is signed by the IVPS, the TOE checks the signature to
make sure it comes from a legitimate IVPS and hasn't been modified. The IVP defines the Identity Verification Method (IVM) for the
SR and the organizational policies defined in TS 13584. If an IVPS doesn’t exist, the SPCA defines the IVM itself. Otherwise, the
TOE uses the predefined default IVM which has the highest security level. During identity verification, the Identity Verification
Certificate within the eID Card is not only verified offline by the TOE, but also validated online with the help of the Online
Certificate Status Protocol (OCSP) Server. If the online certificate validation cannot be achieved due to technical problems, there are
two options to continue the operation:
(i) the TOE validates the eID Card of the Service Requester using the Certificate Revocation List downloaded on the SSR
Device. In this case, the information that “OCSP check could not be achieved" shall be included in the IVA.
(ii) The TOE does not validate the eID Card of the Service Requester. In this case, the information that “OCSP check and
Revocation List control could not be achieved” shall be included in the IVA. In addition to certificate verification and
validation, according to the IVM, if requested, biometric verification of the SR is done by the TOE using fingerprint,
fingervein or palmvein data. At the end of the authentication, an Identity Verification Assertion (IVA) is generated by
the TOE. Since the IVA is signed by the SAM, it assures origin of identity, time and place. The TOE sends the IVA to
the SPCA and finally, the SPCA forwards the IVA to the IVS, where it's further validated and kept as the evidence for
the operation. Until the IVA is validated by the IVS, the Identification and Authentication of SR is regarded as
incomplete.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 14/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
2-Operational Environment for SSR Type II
4. Card Insertion Request (for SR)
13. PIN-Biometrics Request (for SR)
15. Identity Verification
Assertion (IVA)
17. Identity Verification Assertion
(IVA) Validation Request
SSR
Type II
5. eID Card
OCSP Server
PKI Center
Identity Verification Server
(IVS)
Application Server
IVPS
Service Provider
19. Identity Verification Assertion
(IVA) Validation Response
14. PIN-Biometrics
Identity Verifier
18. Certificate Status
1. Identity Verification Request
Service Provider
Client Application
(SPCA)
2. Card Insertion Request (for SA)
3. eID Card
11. PIN-Biometrics Request (for SA)
12. PIN-Biometrics
6. Identity Verification
Specification (IVSP)
Service
Requester
Service
Attendee
9. Identity Verification Policy (IVP)
Figure 2. User Environment of Type II (without SAS)
User environments for Type II devices are given in Figure 2 and Figure 3. As seen, two smartcard slots are required for Type II
devices. The second smartcard slot is needed for Service Attendee support. Operation is initiated by the SPCA. If SSR Access Server
(SAS) exists as shown in Figure 3, the SPCA communicates to the TOE through the SAS via Ethernet interface, otherwise, it
communicates to the TOE via USB interface.
5. Card Insertion Request (for SR)
14. PIN-Biometrics Request (for SR)
16. Identity Verification
Assertion (IVA)
20. Identity Verification Assertion
(IVA) Validation Request
SSR
Type II
6. eID Card
OCSP Server
PKI Center
Identity Verification
Server (IVS)
SAS
IVPS
Service Provider
22. Identity Verification Assertion
(IVA) Validation Response
15. PIN-Biometrics
Identity Verifier
21. Certificate Status
3. Card Insertion Request (for SA)
4. eID Card
12. PIN-Biometrics Request (for SA)
13. PIN-Biometrics
7. Identity Verification
Specification (IVSP)
Service
Requester
Service
Attendee
10 Identity Verification Policy
(IVP)
Application
Server
Service Provider
Client Application
(SPCA)
Figure 3. User Environment of Type II (with SAS)
In this scenario, the procedures are similar to the scenario for Type I SRR devices. However, in addition to Identification and
Authentication of SR, Type II SRR devices also support Identification and Authentication of Service Attendee (SA) thanks to the
second smartcard slot. At the end of the Identification and Authentication of SR and SA, an Identity Verification Assertion (IVA) is
generated by the TOE. This time the IVA includes Service Attendee information as well. The TOE sends the IVA to the SPCA.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 15/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
Finally, SPCA forwards the IVA to IVS, which validates it and keeps it as an evidence for the operation. Until the IVA is validated by
the IVS, the Identification and Authentication of SR and SA is regarded as incomplete.
3-Operational Environment for SSR Type III
10. Identity Verification Assertion
(IVA) Validation Request
SSR
Type III
Sertifika Sunucusu
PKI Center
Identity Verification Server
(IVS)
IVPS
Service Provider
12. Identity Verification Assertion
(IVA) Validation Response
Identity Verifier
Application
Server
11. Certificate Status
1. Identity Verification Request
2. Card Insertion Request (for SR)
3. eID Card
7. PIN-Biometrics Request (for SR)
8. PIN-Biometrics
Service
Requester
Figure 4. User Environment of Type III
User environment for Type III devices is given in Figure 4. Type III device is intended for mobile use. As seen, the environment
doesn’t require a PC. The TOE performs the functions of SPCA itself. It directly communicates to OSPCS, Application Server and
IVPS. Type III devices may have one or two smartcard slots depending on usage. In the scenario, the procedures are similar to the
scenario for Type I and Type II devices. However, the TOE itself initiates the Identification and Authentication Operation. In
addition, offline usage scenarios are defined for mobile SSR Device. In case OCSP Server is not reached;
(i)TOE validates the eID Card of the Service Requester from the Revocation List downloaded on the SSR Device and puts the
information that OCSP could not be achieved into the IVA.
(ii)TOE does not validate the eID Card and puts the information that OCSP and Revocation List control could not be achieved in the
IVA. This scenario is the same as the Type I and Type II Devices. However, the revocation list shall be downloaded onto the mobile
SSR since SSR Device could run totally offline for maximum offline working time duration. In addition, if the connection with the
APS is failed, IVAs could be stored in the SSR Device securely until the device becomes online again. The maximum offline working
time is defined by the authorized foundations. Stored IVAs stored be transmitted to APS securely before this time.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 16/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
2.5 Security Functional Requirements
Security Function Class Function Family Security Functional Component
CLASS FAU: SECURITY AUDIT
FAU_GEN FAU_GEN.1
FAU_ARP FAU_ARP.1
FAU_STG
FAU_STG.1
FAU_STG.4
FAU_SAA FAU_SAA.1
CLASS FCS: CRYPTOGRAPHIC
SUPPORT
FCS_CKM
FCS_CKM.1/SM - Cryptographic key
generation for secure messaging with eID,
SA, EBS, EPP and Role Holder
FCS_CKM.1/SM_TLS - Cryptographic
key generation for secure messaging with
Identity Verification Server, Application
Server and SSR Access Server
FCS_CKM.1/IVA_Keys - Cryptographic
key generation for IVA Confidentiality
and Integrity
FCS_CKM.4
FCS_COP
FCS_COP.1/SHA-256 - Cryptographic
operation SHA 256
FCS_COP.1/AES-CBC - Cryptographic
AES CBC operation
FCS_COP.1/AES-CMAC - Cryptographic
CMAC operation
FCS_COP.1/RSA - Cryptographic RSA
encryption operation
FCS_COP.1/Sign_Ver - Cryptographic
signature verification operation
CLASS FIA: IDENTIFICATION AND
AUTHENTICATION
FIA_AFL FIA_AFL.1
FIA_UID FIA_UID.2
FIA_UAU
FIA_UAU.2
FIA_UAU.5
FIA_UAU.6
FIA_UAU.7
CLASS FCO: COMMUNICATION FCO_NRO FCO_NRO.2
CLASS FMT: SECURITY
MANAGEMENT
FMT_MOF
FMT_MOF.1/Verify - Management of
security functions behavior - verify
FMT_MOF.1/Upgrade - Management of
security functions behavior - upgrade
FMT_MTD
FMT_MTD.1/SAM - PIN Management of
TSF data
FMT_MTD.1/DTN - Management of TSF
data - Device Tracking Number
FMT_MTD.1/Time - Management of TSF
data -Time
FMT_SMF FMT_SMF.1
FMT_SMR FMT_SMR.1
CLASS FPT: PROTECTION OF THE
TSF
FPT_STM. FPT_STM.1
FPT_IDA
FPT_IDA.1/CVC – Imported TSF Data
Authentication - Card Verifiable
Certificates
FPT_IDA.1/IVP - Imported TSF Data
Authentication - Identity Verification
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 17/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
Policy
FPT_IDA.1/OCSP - Imported TSF Data
Authentication - OCSP
FPT_IDA.1/TOE_Upgrade - Imported
TSF Data Authentication - TOE Upgrade
Package
FPT_SSY
FPT_SSY.1/Cert - State Synchronization -
Secure Messaging and Role CVC
FPT_SSY.1/SAM - State Synchronization
- SAM
FPT_SSY.1/IVC - State Synchronization -
IVC
FPT_SSY.1/RH_Auth_Status - State
Synchronization Role Holder
Authentication Status
FPT_TST FPT_TST.1
FPT_EMSEC FPT_EMSEC.1
FPT_FLS FPT_FLS.1
CLASS FDP: USER DATA
PROTECTION
FDP_SDI FDP_SDI.2
FDP_IFC FDP_IFC.1
FDP_IFF FDP_IFF.1
FDP_ITC FDP_ITC.1
FDP_ETC FDP_ETC.2
FDP_RIP FDP_RIP.1
CLASS FTP: TRUSTED
PATH/CHANNELS
FTP_ITC FTP_ITC.1
2.6 IT Security Assurance Requirements
Assurance requirements for Common Criteria Protection Profile for Application Firmware of Secure Smartcard Reader for National
Electronic Identity Verification System v2.5 are consistent with assurance components in CC Part 3 and evaluation assurance level is
EAL4+ (ALC_DVS.2).
2.7 Results of the Evaluation
The evaluation is performed with reference to the CC v3.1 and CEM v3.1. The verdict of Common Criteria Protection Profile for
Application Firmware of Secure Smartcard Reader for National Electronic Identity Verification System v2.5 is “pass” as it satisfies all
requirements of APE class of CC. Therefore, the evaluation results were decided to be “suitable”.
2.8 Evaluator Comments / Recommendations
There are no recommendations concerning the Common Criteria Protection Profile for Application Firmware of Secure Smartcard
Reader for National Electronic Identity Verification System v2.5.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 18/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
3 PP DOCUMENT
Information about the Protection Profile document with associated with this certification report is as follows:
Name of Document: Common Criteria Protection Profile for Application Firmware of Secure Smartcard Reader for National
Electronic Identity Verification System
Version No: 2.5
Date of Document: 09.11.2015
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 19/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
4 GLOSSARY & ACRONYMS
4.1 Glossary
Service Provider Environment:
SCPA (Service Provider Client Application): The external system that requests the identity verification. The SCPA may
directly state the method that will be used in the identity verification process or may state the method will be declared by the
IVPS. And as a final option the SCPA may state that the default method stored in the TOE should be used in the identity
verification process.
IVPS (Identity Verification Policy Server): The external system that prepares the Identity Verification Policy (Identity
Verification Policy) and sends it to the TOE. The TOE performs the identity verification method defined in the policy.
IVS (Identity Verification Server): The external entity that validates the IVAs created by the TOE.
Identity Verification Environment:
eID Card (Electronic Identity Card): The national identity card used by service requester for claiming and proving his or her
identity. eID Card is issued by or on behalf of General Directorate of Civil Registration and Nationality – Ministry of the
Interior.
SR (Service Requester): Service requester is the person who claims and proves his or her identity. The service requester claim
starts with presenting eID Card to the SSR. The TOE, the SAM and the Service Attendee together verify the claim interacting
with the Service Requester and the eID Card .
SA (Service Attendee): Service Attendee is the person who attends the identity verification process and approves if the photo
displayed by the SSR belongs to the service requester. Service Attendee is also subject to prove his or her identity one of the
methods.
OCSPS (Online Certificate Status Protocol Server): The server that keeps the revocation status of the IVCs. The OCSPS
responds to the OCSP queries with the revocation status of the queried IVC.
Malicious Actors and Malicious External Systems:
Identity Faker: The attacker who tries to masquerade his or her identity with someone else’s identity.
Illegitimate eID Card: An identity faker may use three types of illegitimate eID Card: a counterfeit eID Card, a forged eID
Card and a revoked eID Card.
The Proxy Entities:
PC (Personal Computer): The computer the UIS or NIS is running on.
SSR Environment:
SAM (Secure Access Module): The SAM is the secure element of the SSR. The critical security functionality of the SSR is
performed by the SAM. Since the TOE is the application software of the SSR, the SAM is an external element. The TOE
accesses the SAM services through PIN verification.
The SSR Platform: The SAM and the SSR Environment are the non-TOE hardware, software and firmware that the TOE
needs to function. The SSR environment at minimum consists of USB Interface, the smart card interfaces, graphic display,
Service Requester interface, real time clock, execution environment and file system. Optionally depending on the
configuration, the TOE may have Service Attendee interface, biometric sensor, Ethernet interface and interfaces for EBS and
EPP. The SSR environment should also include security features to protect itself from tampering.
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 20/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
EBS (External Biometric Sensor): Optional external entity connected to the TOE. Depending on the sensor type, it sends the
biometric template or biometric verification result to the TOE.
EPP (External PIN-PAD):Optional external entity connected to the TOE.The EPP is present only for TOE of Configuration
Type III. External PIN_PAD offers convenience to the Service Requester. When external PIN-PAD is available, the Service
Requester inserts his or her eID Card and enters IVC-PIN to external PIN-PAD.
4.2 Acronyms
APS: Application Server
CRL: Certificate Revocation List
CVC: Card Verifiable Certificate
DA: Device Authentication
DTN: Device Tracking Number
EBS: External Biometric Sensor
eID: Electronic Identity
EPP: External pin Pad
eIDMS: Electronic Identity Management System
eID Card: Electronic Identity Card of Turkish Republic
eIDVS: Electronic Identity Verification System
eSign: Electronic Signature
IV: Identity Verification
IVA: Identity Verification Assertion
IVC: Identity Verification Certificate
Identity Verification Policy: Identity Verification Policy
IVPS: Identity Verification Policy Server
IVR: Identity Verification Request
IVS: Identity Verification Server
IVSP: Identity Verification Specification
OCSPS: Online Certificate Status Protocol Server
SAM: Security Access Module
SAS: SSR Access Server
SPCA: Service Provider Client Application
SPSA: Service Provider Server Application
SSR: Card Acceptance Device
TA: Terminal Authentication
BİLİŞİM TEKNOLOJİLERİ
TEST VE BELGELENDİRME
DAİRESİ BAŞKANLIĞI /
INFORMATION TECHNOLOGIES TEST AND
CERTIFICATION DEPARTMENT
Doküman No BTBD-03-01-FR-01
CCCS CERTIFICATION REPORT
Yayın Tarihi 30/07/2015
RevizyonTarihi 28/08/2015 No 01
Sayfa 21/21
Bu dokümanın güncelliği, elektronik ortamda TSE Doküman Yönetim Sisteminden takip edilmelidir.
Basım tarih ve saati: 18.12.2015 17:42
5 BIBLIOGRAPHY
[1] Common Criteria for Information Technology Security Evaluation, Version 3.1 Revision 4, September 2012
[2] Common Methodology for Information Technology Security Evaluation, CEM, Version 3.1 Revision 4, September 2012
[3] BTBD-03-01-TL-01 Certification Report Preparation Instructions, Rel.Date: August,4,2015
[4] Common Criteria Protection Profile for Application Firmware of Secure Smartcard Reader for National Electronic Identity
Verification System
[5] ETR 48 TR 02 /13.11.2015