Certification Report
EAL 4 Evaluation of
WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with
Fireware™ Version 8.0
Issued by:
Communications Security Establishment
Certification Body
Canadian Common Criteria Evaluation and Certification Scheme
© 2005 Government of Canada, Communications Security Establishment
Evaluation number: 383-4-30
Version: 1.0
Date: 30 June 2005
Pagination: i to iii, 1 to 12
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page i of iii -
DISCLAIMER
The Information Technology (IT) product identified in this certification report, and its
associated certificate, has been evaluated at an approved evaluation facility – established
under the Canadian Common Criteria Evaluation and Certification Scheme (CCS) – using
the Common Methodology for Information Technology Security Evaluation, Version 1.0, for
conformance to the Common Criteria for Information Technology Security Evaluation,
Version 2.1. This certification report, and its associated certificate, apply only to the
identified version and release of the product in its evaluated configuration. The evaluation
has been conducted in accordance with the provisions of the CCS, and the conclusions of the
evaluation facility in the evaluation report are consistent with the evidence adduced. This
report, and its associated certificate, are not an endorsement of the IT product by the
Communications Security Establishment (CSE), or any other organization that recognizes or
gives effect to this report, and its associated certificate, and no warranty for the IT product by
the CSE, or any other organization that recognizes or gives effect to this report, and its
associated certificate, is either expressed or implied.
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page ii of iii -
FOREWORD
The Canadian Common Criteria Evaluation and Certification Scheme (CCS) provides a
third-party evaluation service for determining the trustworthiness of Information Technology
(IT) security products. Evaluations are performed by a commercial Common Criteria
Evaluation Facility (CCEF) under the oversight of the CCS Certification Body, which is
managed by the Communications Security Establishment (CSE).
A CCEF is a commercial facility that has been approved by the CCS Certification Body to
perform Common Criteria evaluations; a significant requirement for such approval is
accreditation to the requirements of ISO Standard 17025, General requirements for the
accreditation of calibration and testing laboratories. Accreditation is performed under the
Program for the Accreditation of Laboratories Canada (PALCAN), administered by the
Standards Council of Canada.
The CCEF that carried out this evaluation is Electronic Warfare Associates-Canada, Ltd.
located in Ottawa, Ontario.
By awarding a Common Criteria certificate, the CCS Certification Body asserts that the
product complies with the security requirements specified in the associated security target. A
security target is a requirements specification document that defines the scope of the
evaluation activities. The consumer of certified IT products should review the security
target, in addition to this certification report, in order to gain an understanding of any
assumptions made during the evaluation, the IT product's intended environment, its security
requirements, and the level of confidence (i.e., the evaluation assurance level) that the
product satisfies the security requirements.
This certification report is associated with the certificate of product evaluation dated 8 July
2005, and the security target identified in Section 4 of this report.
The certification report, certificate of product evaluation and security target are posted on the
CCS Certified Products list at:
http://www.cse-cst.gc.ca/en/services/common_criteria/trusted_products.html
This certification report makes reference to WatchGuard and Firebox which are trademarks
or registered trademarks of WatchGuard Technologies, Inc.
Reproduction of this report is authorized provided the report is reproduced in its entirety.
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page iii of iii -
TABLE OF CONTENTS
Disclaimer....................................................................................................................................... i
Foreword........................................................................................................................................ii
Table of Contents.........................................................................................................................iii
Executive Summary...................................................................................................................... 1
1 Identification of Target of Evaluation ................................................................................ 2
2 TOE Description ................................................................................................................... 2
3 Evaluated Security Functionality........................................................................................ 2
4 Security Target...................................................................................................................... 2
5 Common Criteria Conformance.......................................................................................... 3
6 Security Policy....................................................................................................................... 3
7 Assumptions and Clarification of Scope............................................................................. 3
7.1 SECURE USAGE ASSUMPTIONS.................................................................................................3
7.2 ENVIRONMENTAL ASSUMPTIONS .............................................................................................4
7.3 CLARIFICATION OF SCOPE........................................................................................................4
8 Architectural Information ................................................................................................... 4
9 Evaluated Configuration...................................................................................................... 5
10 Documentation ...................................................................................................................... 5
11 Evaluation Analysis Activities ............................................................................................. 7
12 ITS Product Testing.............................................................................................................. 8
12.1 ASSESSING DEVELOPER TESTS.................................................................................................8
12.2 INDEPENDENT FUNCTIONAL TESTING ......................................................................................9
12.3 INDEPENDENT VULNERABILITY TESTING.................................................................................9
12.4 CONDUCT OF TESTING .............................................................................................................9
12.5 TESTING RESULTS....................................................................................................................10
13 Results of the Evaluation.................................................................................................... 10
14 Evaluator Comments, Observations and Recommendations ......................................... 10
15 Glossary ............................................................................................................................... 10
15.1 ACRONYMS, ABBREVIATIONS AND INITIALIZATIONS ...............................................................10
16 References............................................................................................................................ 11
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 1 of 12 -
Executive Summary
The Target of Evaluation (TOE) for this Evaluation Assurance Level (EAL) 4 evaluation is
the Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0.1
The Firebox® X Family of firewalls are traffic-filter firewalls that filter traffic based on
policies set by the system administrator. The administrator can set policies based on source
address of the information, destination address of the information, what service the traffic is
using (HTTP, HTTPS, FTP, etc.), the source port of the information, the destination port of
the information, and the interface the traffic arrives or exits on (Internal/External).
Electronic Warfare Associates-Canada, Ltd. is the CCEF that conducted the evaluation. This
evaluation was completed on 30 June 2005, and was carried out in accordance with the rules
of the Canadian Common Criteria Evaluation and Certification Scheme (CCS).
The scope of the evaluation is defined by the security target, which identifies assumptions
made during the evaluation, the intended environment for the Firebox® X Family: Core™
and Peak™ Series with Fireware™ Version 8.0, the security requirements, and the level of
confidence (evaluation assurance level) at which the product is intended to satisfy the
security requirements. Consumers of the Firebox® X Family: Core™ and Peak™ Series
with Fireware™ Version 8.0 are advised to verify that their own environment is consistent
with the security target, and to give due consideration to the comments, observations and
recommendations in this certification report.
The results documented in the evaluation technical report2
for this product provide sufficient
evidence that it meets the EAL 4 assurance requirements for the evaluated security
functionality. The evaluation was conducted using the Common Methodology for
Information Technology Security Evaluation, Version 1.0 (with applicable final
interpretations), for conformance to the Common Criteria for Information Technology
Security Evaluation, version 2.1.
The Communications Security Establishment, as the CCS Certification Body, declares that
the WatchGuard Technologies, Inc. Firebox® X Family: Core™ and Peak™ Series with
Fireware™ Version 8.0 evaluation meets all the conditions of the Arrangement on the
Recognition of Common Criteria Certificates and that the product will be listed on the CCS
Certified Products list.
1
The Core™ Series comprises models X500, X700, X1000, and X2500; the Peak™ Series comprises models
X5000, X6000, and X8000.
2
The evaluation technical report is a CCS document that contains information proprietary to the developer
and/or the evaluator, and is not releasable for public review.
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 2 of 12 -
1 Identification of Target of Evaluation
The Target of Evaluation (TOE) for this Evaluation Assurance Level (EAL) 4 evaluation is
the Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0, from
WatchGuard Technologies, Inc.
2 TOE Description
The TOE comprises the Firebox® X Family: Core™ Series X500, X700, X1000, and X2500
and the Peak™ Series X5000, X6000, and X8000.
All of the Firebox® X Family appliances employ a hardened Linux operating system that is
based on Kernel version 2.4. Linux processes not essential to the Firebox® X Family have
been removed. There is no method of accessing the operating system directly.
The Firebox® X Family of firewalls filter traffic coming through the appliance based on
policies that are created by the system administrator. In the Common Criteria Mode of
operation, the administrator can add policies based on: source address of the information,
destination address of the information, what service the traffic is using (HTTP, HTTPS, FTP,
etc.), the source port of the information, the destination port of the information, and the
interface the traffic arrives or exits on (Internal/External).
The only method of administering the Firebox® X Family is through the command line
interface (CLI).
3 Evaluated Security Functionality
The complete list of evaluated security functionality for the Firebox® X Family: Core™ and
Peak™ Series with Fireware™ Version 8.0 is identified in Section 5 of the Security Target.
4 Security Target
The ST associated with this Certification Report (CR) is identified by the following
nomenclature:
Title: WatchGuard Technologies, Inc. Firebox® X Family:
Core™ and Peak™ Series with Fireware™ Version 8.0
Security Target
Version: 2.1
Date: June 27, 2005
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 3 of 12 -
5 Common Criteria Conformance
The evaluation was conducted using the Common Methodology for Information Technology
Security Evaluation, Version 1.0, for conformance to the Common Criteria for Information
Technology Security Evaluation, version 2.1, incorporating all final interpretations issued
prior to May 2004.
The Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0 is:
a. Common Criteria Part 2 conformant, with security functional requirements based
only upon functional components in Part 2; and
b. Common Criteria Part 3 conformant, with security assurance requirements based only
upon assurance components in Part 3.
The Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0 conforms
with the U.S. Government Traffic-Filter Firewall Protection Profile for Low-Risk
Environments, Version 1.1, April 1999 (TFFPP).
6 Security Policy
The Firebox® X Family implements an information flow control policy. The subjects under
the control of this policy are external IT entities sending information through the TOE to
internal IT entities, and internal IT entities sending information through the TOE to external
IT entities. Policy detail can be found in the Section 5.1.1 of the ST.
7 Assumptions and Clarification of Scope
Consumers of the Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version
8.0 product should consider assumptions about usage and environmental settings as
requirements for the product’s installation and its operating environment. This will help to
ensure the proper and secure operation of the product.
7.1 Secure Usage Assumptions
The Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0 is designed
for use by network administrators and it is assumed that these administrators are
appropriately trained and experienced and have no malicious intentions.
It assumed that the product will be installed and configured using the guidance documents
provided by WatchGuard Technologies, Inc. These documents are listed in Section 10.
7.2 Environmental Assumptions
The Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0 is designed
to control the flow of information between networks. For these appliances to be effective it is
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 4 of 12 -
assumed that information may not flow between the networks without passing through the
TOE.
The only CC approved method of Firebox® administration is through a command line
interface (CLI) that resides in the same physically secure location as the TOE. The device
can be managed only with this direct serial connection. Remote management is not supported
in Common Criteria mode. All policies that allow remote management are disabled. It is
further assumed that access to the console is restricted to authorized administrators.
7.3 Clarification of Scope
The Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0 can not
prevent authorized administrators from carelessly configuring a Firewall such that the
information flow control policy is compromised.
8 Architectural Information
The Firebox® X Family of firewalls comprise a hardware platform, a hardened Linux
operating system that is based on Kernel version 2.4, and Fireware™ Version 8.0.
The Firebox® X Family implements an information flow control policy. Policy enforcement
is performed by the Fireware™ Version 8.0 RapidCore software application. The RapidCore
application handles all information flow and the storeage of user account information, audit
records, and policy information.
For additional architectural information refer to Section 2 of the ST.
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 5 of 12 -
9 Evaluated Configuration
The Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0 evaluated
configuration comprises:
• the Core™ Series hardware configuration models: X500, X700, X1000, X2500, and
• the Peak™ Series hardware configuration models: X5000, X6000, X8000.
The firmware version for all Firebox® X Family models is Fireware™ Version 8.0, build
4057.
In the evaluated configuration, a CC Mode is enabled in accordance with Chapter 5 of the
publication entitled WatchGuard® Fireware Command Line Interface (WatchGuard Fireware
v8.0). The evaluated configuration is limited to administration through the CLI only and
does not include Virtual Private Network (VPN), Demilitarized Zone (DMZ), or High
Availability (HA) functionality.
10 Documentation
The following publications describe all the procedures necessary to install and operate the
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0 in its evaluated
configuration (CC mode):
• WatchGuard Technologies, Inc. Operating the Firebox® X Family: Core™ and
Peak™ Series with Fireware™ Version 8.0 in Common Criteria Operation Mode,
Document Version 1.0.
• WatchGuard Technologies, Inc. Firebox® X Family: Core™ and Peak™ Series with
Fireware™ Version 8.0 Command Line Interface Reference, Document Version 1.0.
WatchGuard Technologies, Inc. also provides additional hardware, configuration, upgrade,
reference and user guides for the WatchGuard® System Manager (WSM) - one version for
the 500, 700, 1000 and 2500 and another for the 5000, 6000 and 8000 3
.
3
The Fireware Command Line Interface v8.0 (CLI) and the WatchGuard® System Manager (WSM) user
interface v8.0 are not designed to be used together. The CLI and WSM interface do not create compatible
configuration files. The CLI is only for use in Common Criteria mode. When you enable Common Criteria
mode, the CLI disables the ability to create and edit a configuration file with the WSM software. While in
Common Criteria mode, you must use the CLI to make all configuration changes.
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 6 of 12 -
Core™ Series Documentation:
• WatchGuard® System Manager User Guide, Doc Version: 8.0-050411
• WatchGuard® System Manager Reference Guide, Doc Version: 8.0-050410
• WatchGuard System Manager 7.x to 8.0 Upgrade Instructions (pamphlet)
• WatchGuard® System Manager Fireware Configuration Guide, Doc Version: 8.0-
050411
• WatchGuard® System Manager WFS Configuration Guide, Doc Version: 7.4-050411
• Firebox X Hardware Guide, Part No: 1311-001
• WatchGuard® Fireware™ Pro Migration Guide , Doc Version: 8.0-050420
• WatchGuard® Mobile User VPN Administration Guide, Doc Version: 8.0-050411
• WatchGuard® Mobile User VPN Client End User Brochure – Windows 2000,
Version: 6.0, Part No: 1200016
• WatchGuard® Mobile User VPN Client End User Brochure-Windows NT, Version
6.0, Part No: 1200016
• WatchGuard® Mobile User VPN Client End User Brochure-Windows XP, Version
6.0, Part No: 1200016
Peak™ Series Documentation:
• WatchGuard® System Manager User Guide, Doc Version: 8.0-050411
• WatchGuard® System Manager Reference Guide, Doc Version: Reference-8.0-
050410
• WatchGuard® System Manager Fireware Configuration Guide, Guide Version: 8.0-
050411
• Firebox® X Peak Hardware Guide, Doc Version: 8.0, Publication ID: 1311-001, Text
ID: 1311-000
• WatchGuard® Firebox X Peak™ QuickStart Guide, Part No. 2065-002
WGCX66239_0405
• WatchGuard® Fireware™ Pro Migration Guide, Guide Version: 8.0-050420
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 7 of 12 -
• WatchGuard® Mobile User VPN Administrator Guide, Document Version: 8.0-
050411
• WatchGuard® Mobile User VPN Client End User Brochure – Windows 2000,
Version 6.0, Part No: 1200016
• WatchGuard® Mobile User VPN Client End User Brochure-Windows NT, Version
6.0, Part No: 1200016
• WatchGuard® Mobile User VPN Client End User Brochure-Windows XP, Version
6.0, Part No: 1200016
11 Evaluation Analysis Activities
The evaluation analysis activities involved a structured evaluation of the Firebox® X Family:
Core™ and Peak™ Series with Fireware™ Version 8.0, including the following areas:
Configuration management: An analysis of the Firebox® X Family: Core™ and Peak™
Series with Fireware™ Version 8.0 development environment and associated documentation
was performed. The evaluators found that the Firebox® X Family: Core™ and Peak™
Series with Fireware™ Version 8.0 configuration items were clearly marked and that control
was exercised over all modifications to the configuration items. The developer’s
configuration management system was observed during two site visits, and it was found to be
mature and well developed.
Secure delivery and operation: The evaluators examined the delivery documentation and
determined that it described all of the procedures required to maintain the integrity of the
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0 during
distribution to the consumer. The evaluators examined and tested the installation, generation
and start-up procedures, and determined that they were complete and sufficiently detailed to
result in a secure configuration.
Design documentation: The evaluators analysed the Firebox® X Family: Core™ and
Peak™ Series with Fireware™ Version 8.0 functional specification, high-level design, low
level design, security policy model and source code. The evaluators determined that the
design documents were internally consistent, and completely and accurately described all
interfaces and security functions. The evaluators also independently verified that the
correspondence mappings between the design documents were correct.
Guidance documents: The evaluators examined the Firebox® X Family: Core™ and
Peak™ Series with Fireware™ Version 8.0 user and administrator guidance documentation
and determined that it sufficiently and unambiguously described how to securely use and
administer the product, and that it was consistent with the other documents supplied for
evaluation.
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 8 of 12 -
Life-cycle support: The evaluators assessed the development security procedures during two
site visits and determined that they detailed sufficient security measures for the development
environment to protect the confidentiality and integrity of the Firebox® X Family: Core™
and Peak™ Series with Fireware™ Version 8.0 design and implementation. The evaluators
determined that the developer has used a documented model of the product life cycle. The
evaluators determined that the developer has used well-defined development tools that yield
consistent and predictable results.
Vulnerability assessment: The strength of function claims made in the Security Target for
the Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0 were
validated through independent evaluator analysis. The evaluators also validated the
developer’s vulnerability, misuse and strength of function analyses. In addition, the
evaluators performed an independent vulnerability analysis and developed tests that focused
on potential vulnerabilities in the Firebox® X Family: Core™ and Peak™ Series with
Fireware™ Version 8.0.
All these evaluation activities resulted in PASS verdicts.
12 ITS Product Testing
Testing at EAL 4 consists of the following three steps: assessing developer tests, performing
independent functional tests, and performing independent vulnerability tests. During this
evaluation, the evaluators developed their independent tests by examining the design and
guidance documentation, examining developer analysis, and repeating a sub-set of developer
tests.
12.1 Assessing Developer Tests
The evaluators verified that the developer met their testing responsibilities by examining
their test evidence, reviewing their test results and repeating a subset of the developer tests.
The evaluators reviewed the developer’s analysis of test coverage and depth and found them
to be complete and accurate. The correspondence between the tests identified in the
developer’s test documentation, and the functional specification and high-level design was
complete.
Based on a review of the developer's tests, independent testing concentrated on the following
areas:
a. audit;
b. identification and authentication;
c. information flow control; and
d. security management
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 9 of 12 -
Tests were selected which demonstrate that the TOE satisfies the security functional
requirements specified in the Security Target. A total of seven (7) individual tests were
selected for the evaluation, representing approximately 27% of the developer’s test cases that
are applicable to the evaluated configuration.
12.2 Independent Functional Testing
During this evaluation, the evaluator developed independent functional tests by examining
design and guidance documentation, examining the developer's test documentation,
executing a sample of the developer's test cases, and creating test cases that augmented the
developer tests.
12.3 Independent Vulnerability Testing
After reviewing the technical specifications and product documentation, a flaw hypothesis
methodology was used to develop a list of potential vulnerabilities of the TOE. Those
vulnerabilities assessed as potentially exploitable by an attacker possessing a low attack
potential were used to develop penetration test cases.
The following potential attack areas were assessed during the development of potential attack
scenarios:
a. Generic vulnerabilities;
b. Bypassing;
c. Tampering;
d. Direct attacks; and
e. Misuse.
A total of 32 penetration attacks were developed and exercised against the TOE.
Penetration testing did not uncover any exploitable vulnerabilities for the Firebox® X
Family: Core™ and Peak™ Series with Fireware™ Version 8.0 in its anticipated operating
environment.
12.4 Conduct of Testing
The Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0 was
subjected to a comprehensive suite of formally-documented, independent, functional and
vulnerability tests. The testing took place at the IT Security Evaluation and Testing (ITSET)
facility at Electronic Warfare Associates-Canada, Ltd. located in Ottawa, Ontario. The CCS
Certification Body witnessed a portion of the independent testing.
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 10 of 12 -
The detailed testing activities, including configurations, procedures, test cases, expected
results and observed results are documented in the ETR4
.
12.5 Testing Results
The developer’s tests and the independent functional tests yielded the expected results,
giving assurance that the Firebox® X Family: Core™ and Peak™ Series with Fireware™
Version 8.0 behaves as specified in the ST and functional specification.
13 Results of the Evaluation
This evaluation has provided the basis for an EAL 4 level of assurance. The overall verdict
for the evaluation is PASS. These results are supported by evidence in the ETR.
14 Evaluator Comments, Observations and Recommendations
The Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0 includes
comprehensive guides for the installation, configuration and operation of the product.
15 Glossary
This section expands any acronyms, abbreviations and initializations used in this report.
15.1 Acronyms, Abbreviations and Initializations
Acronym/Abbreviation/Initialization Description
CC Common Criteria for Information Technology
Security Evaluation
CCEF Common Criteria Evaluation Facility
CCS Canadian Common Criteria Evaluation and
Certification Scheme
CEM Common Methodology for Information Technology
Security Evaluation
CLI Command Line Interface
CPU Central Processing Unit
CR Certification Report
CSE Communications Security Establishment
EAL Evaluation Assurance Level
4
The evaluation technical report is a CCS document that contains information proprietary to the developer
and/or the evaluator, and is not releasable for public review.
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 11 of 12 -
ETR Evaluation Technical Report
ISO International Organisation for Standardisation
IT Information Technology
ITSET Information Technology Security Evaluation and
Testing
PALCAN Program for the Accreditation of Laboratories
Canada
PP Protection Profile
SOF Strength of Function
ST Security Target
TOE Target of Evaluation
TFFPP U.S. Government Traffic-Filter Firewall Protection
Profile for Low-Risk Environments, Version 1.1,
April 1999
VPN Virtual Private Network
16 References
This section lists all documentation used as source material for this report:
a) Common Criteria for Information Technology Security Evaluation, CCIMB-99-
031/032/033, Version 2.1, August 1999, annotated with final interpretations issued as
of May 2004.
b) Common Methodology for Information Technology Security Evaluation, CEM-
99/045, Part 2: Evaluation and Methodology, Version 1.0, August 1999, annotated
with final interpretations issued as of May 2004.
c) CCS #4: Technical Oversight for TOE Evaluation, Canadian Common Criteria
Evaluation and Certification Scheme (CCS), Version 1.0, 3 October 2002.
d) U.S. Government Traffic-Filter Firewall Protection Profile for Low-Risk
Environments, Version 1.1, April 1999 (TFFPP).
e) WatchGuard Technologies, Inc. Firebox® X Family: Core™ and Peak™ Series with
Fireware™ Version 8.0 Security Target, Version 2.1, June 29, 2005.
CCS Certification Report WatchGuard Technologies, Inc.
Firebox® X Family: Core™ and Peak™ Series with Fireware™ Version 8.0
___________________________________________________________________________
Version 1.0 30 June 2005
- Page 12 of 12 -
f) Evaluation Technical Report (ETR), Firebox® X Family: Core™ and Peak™ Series
with Fireware™ Version 8.0, Version 1.2, 30 June 2005 5
.
5
The evaluation technical report is a CCS document that contains information proprietary to the developer
and/or the evaluator, and is not releasable for public review