© Copyright 2013-2017 SafeNet, Inc.
ALL RIGHTS RESERVED
LUNA®
PCI-E Cryptographic Module
SECURITY TARGET
CR-3524 – REV 18, MAY 30TH
2017.
USED AS A STANDALONE DEVICE OR AS AN EMBEDDED DEVICE IN LUNA® SA
EVALUATION AS ACCORDING TO COMMON CRITERIA EAL4+
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 2 of 111
CONTENTS
1 ST Introduction...................................................................................................................................................................13
1.1 ST Identification......................................................................................................................................................13
1.2 TOE Reference.......................................................................................................................................................13
1.3 TOE Overview ........................................................................................................................................................13
1.4 TOE Description .....................................................................................................................................................15
2 CONFORMANCE CLAIMS ................................................................................................................................................21
2.1 CC Conformance Claim..........................................................................................................................................21
2.2 Protection Profile Conformance Claim....................................................................................................................21
3 SECURITY PROBLEM DEFINITION .................................................................................................................................24
3.1 Introduction.............................................................................................................................................................24
3.2 Threats....................................................................................................................................................................28
3.3 Organisational Security Policies .............................................................................................................................29
3.4 Assumptions ...........................................................................................................................................................30
4 Security Objectives ............................................................................................................................................................32
4.1 Security Objectives for the TOE..............................................................................................................................32
4.2 Security Objectives for the Operational Environment .............................................................................................34
4.3 Security Objectives Rationale.................................................................................................................................35
5 Extended Components Definition.......................................................................................................................................40
5.1 Definition of the Family FCS_RNG .........................................................................................................................40
5.2 Definition of the Family FPT_EMS..........................................................................................................................40
5.3 Definition of the Security Functional Component FPT_TST.2.................................................................................41
6 Security Requirements.......................................................................................................................................................43
6.1 TOE Security Functional Requirements..................................................................................................................44
6.2 TOE Security Assurance Requirements .................................................................................................................66
6.3 IT Security Requirements Rationale .......................................................................................................................72
6.4 Appropriateness of Assurance Requirements.........................................................................................................72
7 TOE Summary Specification ..............................................................................................................................................73
7.1 Overview.................................................................................................................................................................73
7.2 Capability and Policy Settings.................................................................................................................................74
7.3 IT Security Functions ..............................................................................................................................................76
8 RATIONALE TABLES........................................................................................................................................................88
8.1 Introduction.............................................................................................................................................................88
8.2 SFR to Objective Mapping......................................................................................................................................89
8.3 SFR Rationale ........................................................................................................................................................93
8.4 SFR Dependencies.................................................................................................................................................99
8.5 Mapping of IT Security Functions to IT Security Requirements and SFRs ...........................................................104
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 3 of 111
GLOSSARY OF TERMS
Audit data Data recorded related to security relevant activities (i.e. activities controlled by
the TSF). Such audit records can be examined to determine which security
relevant activities took place and whom (which user) is responsible for them.
Authentication
interface/port
Data interface respective port used for input of authentication data.
Authentication data General term for data used for authentication of data or of the identity of an
entity (e.g., a key or a password).
Authorized user An individual or remote IT product for which a user account exists in the TOE.
Black data Cryptographically protected user data representing user information. If this
information needs protection in confidentiality the data shall be encrypted. If
this information needs protection in integrity a cryptographic MAC or digital
signature shall be associated with this data to detect modification.
Bypass Bypass means that cryptographic processing is not used where it usually
would be applied.
Compromise Unauthorized disclosure, modification, substitution, or use of sensitive data
(including plaintext cryptographic keys and other CSPs).
Confidentiality Property that sensitive information is not disclosed to unauthorized individuals,
entities, or processes.
Control input
interface/port
Interface respective port intended for all input commands, signals and control
data (including function calls and manual controls such as switches, buttons,
and keyboards) used to control the operation of a cryptographic module shall
enter via the “control input” interface.
Critical security
parameter (CSP)
Security-related information (e.g., secret and private cryptographic keys, and
TSF data like authentication data) whose disclosure or modification can
compromise the security of a cryptographic module.
Critical TSF TSF that, upon failure, could lead to (i) the disclosure of secret keys, private
keys, or CSPs or (ii) modification of public keys. Examples of critical
functionality include but are not limited to random number generation,
operation of the cryptographic algorithm, and cryptographic bypass.
Crypto Officer Authorized user who has been granted the authority to perform cryptographic
initialization and management functions (including key management) on
cryptographically unprotected data in the red area of the IT system. These
users are expected to use this authority only in the manner prescribed by the
guidance given to them.
Crypto User Individual or process (subject) acting on behalf of an individual that accesses
a cryptographic module in order to obtain cryptographic services.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 4 of 111
Cryptographic
Algorithm
Well-defined computational procedure that takes variable inputs that usually
includes a cryptographic key and produces an output, e.g. encryption,
decryption, a private or a public operation in a dynamic authentication,
signature creation, signature verification, generation of hash value.
Cryptographic
Boundary
Explicitly defined continuous perimeter that established the physical bounds of
a cryptographic module and contains all the hardware, software, and/or
firmware components of a cryptographic module.
Cryptographic
Functions
TSF implementing cryptographic algorithms and/or protocols for:
• Encryption and decryption,
• Signature creation or verification,
• Calculation of Message Authentication Code,
• Entity authentication,
• Key Management.
Cryptographic Key Parameter used in conjunction with a cryptographic algorithm that determines:
• the transformation of plaintext data into ciphertext data,
• the transformation of ciphertext data into plaintext data,
• a digital signature computed from data,
• the verification of a digital signature computed from data,
• a Message Authentication Code computed from data,
• a proof of the knowledge of a secret,
• a verification of the knowledge of a secret or
• an exchange agreement of a shared secret.
Cryptographic key
component (key
component)
Parameter used in conjunction with other key components in an Endorsed
security function to form a plaintext cryptographic key by a secret sharing
algorithm (e.g. the cryptographic plaintext key is the xor-sum of two key
components).
Cryptographic module Set of hardware, software, and/or firmware that implements Endorsed security
functions (including cryptographic algorithms and key generation) contained
within the cryptographic boundary.
Cryptographic
protocol
Cryptographic algorithm including interaction with an external entity (e.g. key
exchange).
Data input
interface/port
Interface respective port intended for all data (except control data entered via
the control input interface) that is input to and processed by the cryptographic
module (including plaintext data, ciphertext data, cryptographic keys and
CSPs, authentication data, and status information from another entities).
Data output
interface/port
Interface respective port intended for all data (except status data output via
the status output interface) that is output from the cryptographic module
(including plaintext data, ciphertext data, cryptographic keys and CSPs,
authentication data, and control information for another entity).
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 5 of 111
Data path Physical or logical route over which data passes; a physical data path may be
shared by multiple logical data paths.
Decryption algorithm Algorithm of decoding a ciphertext into the plaintext using a decryption key.
The decryption algorithm reproduces the plaintext which was used to calculate
the ciphertext with the corresponding encryption algorithm and the
corresponding encryption key.
Digital signature Result of an asymmetric cryptographic transformation of data which, when
properly implemented, provides the services of 1. origin authentication, 2. data
integrity and 3. signer non-repudiation.
Encryption algorithm Algorithm of processing a plaintext into a ciphertext using an encryption key in
a way that decoding of the ciphertext into the plaintext without knowledge of
the corresponding decryption key is computationally infeasible.
Endorsed mode of
operation
For this ST, an operational mode of the cryptographic module that employs
only Endorsed security functions (e.g. installation, startup, normal operation,
maintenance; not to be confused with a specific mode of an Endorsed security
function, e.g., AES CBC mode).
Endorsed security
function
For this ST, a security function (e.g., cryptographic algorithm, cryptographic
key management technique, or authentication technique) that is Endorsed by
the Bundesamt für Sicherheit in der Informationstechnik. (First hints about
Endorsed security functions can be found in BSI TR-02101 [6], but the final
decision whether a security function is deemed Endorsed is made when the
contents of a Security Target is agreed.)
End-user Individual or process (subject) acting on behalf of an individual that accesses
a cryptographic module in order to obtain cryptographic services.
Error detection code
(EDC)
Code computed from data and comprised of redundant bits of information
designed to detect, but not correct, unintentional changes in the data.
Error mode Mode of operation when the cryptographic module has encountered an error
condition as defined in FPT_FLS.1 (term is used for description of the Mode
transition SFP).
Error state State related to the Error mode in the finite state model.
Finite state model In this ST the term finite state model denotes to a finite state machine model,
which includes a description of all states of the module, of all transitions
between these states (including initial state, destination state, input signal
causing the transition, and output signal caused by the transition), and
corresponding state transition diagram(s). The term semiformal finite state
model is used when the finite state model is using semiformal notation for all
of its content.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 6 of 111
Firmware Programs and data components of a cryptographic module that are stored in
hardware (e.g., ROM, PROM, EPROM, EEPROM or FLASH) and cannot be
dynamically written or modified during execution.
Hardware Physical equipment used to process programs and data.
Hash-based message
authentication code
(HMAC)
Message authentication code that utilizes a keyed hash.
Initialization vector
(IV)
Vector used in defining the starting point of an encryption process within a
cryptographic algorithm.
Input data Information that is entered into a cryptographic module for the purposes of
transformation or computation using an Endorsed security function.
Integrity Property that sensitive data has not been modified or deleted in an
unauthorised and undetected manner.
Internal secrets Confidential data inside the cryptographic boundary not intended for export
(e.g. secret or private plaintext keys, reference authentication data).
IT system an IT system using the TOE to protect user data during transmission over or
storage on media to which unauthorised users have access to.
Key establishment Process by which cryptographic keys are securely distributed among
cryptographic modules using manual transport methods (e.g., key loaders),
automated methods (e.g., key transport and/or key agreement protocols), or a
combination of automated and manual methods (consists of key transport plus
key agreement).
Key interface/port Data interface respective port used for the input and output of plaintext
cryptographic key components and CSPs.
Key loader Self-contained unit that is capable of storing at least one plaintext or encrypted
cryptographic key or key component that can be transferred, upon request,
into a cryptographic module.
Key management Activities involving the handling of cryptographic keys and other related
security parameters (e.g., IVs and passwords) during the entire life cycle of
the keys, including their generation, storage, establishment, entry and output,
and destruction.
Key Management
mode
Mode for handling of cryptographic keys and other related security parameters
(e.g., IVs and passwords) during the entire life cycle of the keys, including
their generation, storage, establishment, entry and output, and destruction.
Key transport Secure transport of cryptographic keys from one cryptographic module to
another module.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 7 of 111
Key usage type Type of cryptographic algorithm a key can be used for (e.g. AES encryption,
CMAC calculation, RSA signature creation).
Keying material Any confidential data directly related to keys or to generation or establishment
of keys, i.e. key value itself, key components, intermediate values from key
generation (e.g., random numbers, prime numbers) and intermediate values
from key agreement/derivation (e.g., shared secret).
Maintenance mode Mode of operation for maintaining and servicing a cryptographic module,
including physical and logical maintenance testing.
Maintenance state State related to the Maintenance mode in the Finite state model.
Manual key entry Entry of cryptographic keys into a cryptographic module, using devices such
as a keyboard.
Manual key transport Non-electronic means of transporting cryptographic keys.
Message
authentication with
appendix
Digital signature scheme which requires the message as input to the
verification algorithm. The signature is attached to the message.
Message
authentication with
message recovery
Digital signature scheme with message recovery is a digital signature scheme
for which a priori knowledge of the message is not required for the verification
algorithm.
Microcode Elementary processor instructions that correspond to an executable program
instruction.
Operating conditions Conditions including but not limited to voltage of external power supply and
ambient temperature. (Any environmental condition being accidental or
induced outside of the normal range intended for the TOE may affect the
correct operation or compromise of confidential information.)
Operational CSP CSP used for protection of the confidentiality or integrity of data by
cryptographic operation.
Output data Data containing information that is produced from a cryptographic module.
Password String of characters (letters, numbers, and other symbols) used to
authenticate an identity or to verify access authorization.
Personal identification
number (PIN)
Alphanumeric code or password used to authenticate an identity.
Physical protection Safeguarding of a cryptographic module, cryptographic keys, or CSPs using
physical means.
Plaintext key Unencrypted cryptographic key.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 8 of 111
Port Physical input or output interface of a cryptographic module that provides
access to the module for physical signals, represented by logical information
flows. Physically separated ports do not share the same physical pin or wire.
In the CC terminology a port is a physical external interface of the TOE (direct
or indirect interface to the TSF or interface to the non-TSF portion of the TOE,
cf. CEM paragraph 529 for details).
Power interface/port Interface respective port providing all external electrical power supply.
Power on/off modes Modes for primary, secondary, or backup power. These states may distinguish
between power sources being applied to a cryptographic module.
Private key Cryptographic key, used with a public key cryptographic algorithm, that is
uniquely associated with an entity and is not made public.
Protection Profile Implementation-independent set of security requirements for a category of
Targets of Evaluation (TOEs) that meet specific consumer needs.
Public key Cryptographic key used with a public key cryptographic algorithm that is
uniquely associated with an entity and that may be made public.
Public key
(asymmetric)
cryptographic
algorithm
Cryptographic algorithm that uses two related keys, a public key and a private
key. The two keys have the property that deriving the private key from the
public key is computationally infeasible.
Public key certificate Set of data that uniquely identifies an entity, contains the entity's public key,
and is digitally signed by a trusted party, thereby binding the public key to the
entity.
Random Number
Generator
Random Number Generators (RNGs) used for cryptographic applications
produce a sequence of zero and one bits that may be combined into sub-
sequences or blocks of random numbers. There are three basic classes
physical true RNG, non-physical true RNG, and deterministic RNG. A physical
true RNG produces output that depends on some physical random source
inside the TOE boundary only. A non-deterministic true RNG gets its entropy
from sources from outside the TOE boundary (e.g. by system data like RAM
data or system time of a PC, output of API functions etc. or human interaction
like key strokes, mouse movement etc.). A deterministic RNG consists of an
algorithm that produces a sequence of bits from an initial random value
(seed).
Reference
authentication data
Data known for the claimed identity and used by the TOE to verify the
verification authentication data provided by an entity in an authentication
attempt to prove their identity.
Red data Cryptographically unprotected user data representing user information which
need protection in confidentiality and/or integrity.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 9 of 111
Reset Action to clear any pending errors or events and to bring a system to normal
condition or initial state (e.g. after power-up).
Secret key Cryptographic key, used with a secret key cryptographic algorithm that is
uniquely associated with one or more entities and should not be made public.
Secret key
(symmetric)
cryptographic
algorithm)
Cryptographic algorithm which keys for both encryption and decryption
respective MAC calculation and MAC verification are the same or can easily
be derived from each other and therefore must be kept secret.
Security Officer Authorized user who has been granted the authority to manage the TOE.
These users are expected to use this authority only in the manner prescribed
by the guidance given to them.
Self-test mode Mode of operation in which the cryptographic module performs initial start-up
self-test, self-test at power-up, self-test at the request of the authorised user
and may perform other self-tests identified in FPT_TST.2.6.
Self-test state State related to the Self-test mode in the Finite state model.
Shutdown Shutdown of the TOE initiated by the user (may not include reset after
detection of error or power-off due to loss of power supply).
Signature-creation
key
Private key for the creation of digital signatures.
Signature-verification
key
Public key for the verification of digital signatures.
Software Programs and data components, usually stored on erasable media (e.g., disk),
that can be dynamically written and modified during execution.
Split knowledge Process by which a cryptographic key is split into multiple key components,
individually sharing no knowledge of the original key, that can be subsequently
input into, or output from, a cryptographic module by separate entities and
combined to recreate the original cryptographic key.
Status
data/information
Data/information that is output from a cryptographic module for the purposes
of indicating certain operational characteristics or modes of the module.
Status output
interface/port
Interface respective port intended for all output signals, indicators, and status
data (including return codes and physical indicators such as Light Emitting
Diodes and displays) used to indicate the status of a cryptographic module.
System software Special software within the cryptographic boundary (e.g., operating system,
compilers or utility programs) designed for a specific computer system or
family of computer systems to facilitate the operation and maintenance of the
computer system, and associated programs, and data.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 10 of 111
Target of Evaluation
(TOE)
Information technology product or system and associated preparative and
operational user guidance documentation that is the subject of an evaluation.
TOE Security
Functionality (TSF)
Set of the TOE consisting of all hardware, software, and firmware that must be
relied upon for the correct enforcement of the TOE Security Policy.
TOE Security
Functionality Interface
(TSFI)
Set of interfaces, whether interactive (man-machine interface) or machine
(machine-machine interface), through which TOE resources are accessed,
mediated by the TSF, or information is obtained from the TSF.
Trusted channel Means by which a TSF and a remote trusted IT product can communicate with
necessary confidence.
Trusted path Means by which a user and a TSF can communicate with necessary
confidence.
TSF data Data for the operation of the TOE upon which the enforcement of the SFR
relies.
Unauthenticated user Identified user not being authenticated and having rights as identified in the
component FIA_UAU.1.
Unauthorized user User who may obtain access only to system provided public objects if any
exist.
Unidentified user User not being identified and having rights as identified in the component
FIA_UID.1.
User Any entity (human user or external IT entity) outside the TOE that interacts
with the TOE (includes both authorized and unauthorized entities).
User data Data for the user that does not affect the operation of the TSF.
Crypto User mode In a Crypto User mode the data interfaces are open for encryption/decryption
of user data with operational keys but key management functions are blocked.
Verification
authentication data
Data provided by an entity in an authentication attempt to prove their identity
to the TOE.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 11 of 111
LIST OF ACRONYMS AND ABBREVIATIONS
ASCII American Standard Code for Information Interchange
ANSI American National Standards Institute
API Application Programming Interface
BSI Bundesamt für Sicherheit in der Informationstechnik
CA Certificate Authority
CC Common Criteria
CIMS Certificate Issuing and Management System
CKE Cryptographic Key Export
Challenge
Secret
A variable 7 to 16 character ASCII string used during authentication of the Crypto
Officer and Crypto User roles generated at the time of role creation and required for
authentication to the TOE
CLI Command Line Interface
CO Crypto Officer
COTS Commercial Off-the-Shelf
CSP Critical Security Parameter
CU Crypto User
DES Data Encryption Standard
DLL Dynamic Linked Library
DRBG Deterministic Random Bit Generator
DSA Digital Signature Algorithm
EAL Evaluation Assurance Level
FIPS Federal Information Processing Standard
HSM Hardware Security Module
IT Information Technology
MTK Master Tamper Key
NIST National Institute of Science and Technology
PED PIN Entry Device (trusted IT device)
PIN Personal Identification Number
PKCS Public Key Cryptography Standard
PKI Public Key Infrastructure
PP Protection Profile
RAM Random Access Memory
RNG Random Number Generator (Generation)
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 12 of 111
RSA Asymmetric algorithm developed by Rivest, Shamir and Adleman
SAR Security Assurance Requirements
SF Security Function
SFP Security Function Policy
SFR Security Functional Requirements
SHA Secure Hash Algorithm
SO Security Officer
ST Security Target
TAC Token Access Control (Luna Terminology).
TDES Triple DES
TOE Target of Evaluation
TSA Time Stamp Authority
TSF TOE Security Functions
TSFI TSF Interface
TSP TOE Security Policy
UAV User Authorization Vector
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 13 of 111
1 ST Introduction
1.1 ST Identification
Title: LUNA®
PCI-E Cryptographic Module - Security Target
Version: Rev 18
ST Reference: CR-3524
Assurance level: EAL 4 augmented by ALC_FLR.2 and AVA_VAN.4.
Keywords: Commercial-off-the-shelf (COTS), hardware security module, certification
authority, certification service provider, key management, cryptographic services, key generation, key
protection, digital certificate management, public-key infrastructure, digital signature, encryption,
confidentiality, integrity, networked information systems, baseline information protection.
1.2 TOE Reference
Vendor Name SafeNet, Inc.
TOE Name LUNA®
PCI-E Cryptographic Module.
1.3 TOE Overview
The Target of Evaluation (TOE) described by this Security Target (ST) is inspired but non-conformant to
the Protection Profile – BSI-CC-PP-0078 [Cryptographic Modules, Security Level “Enhanced Basic”],
version 2.0.2 dated December 6, 2012, published by the Bundesamt für Sicherheit in der
Informationstechnik (BSI).
The TOE described in the Security Target is modified from that described in [Cryptographic Modules,
Security Level “Enhanced Basic”], in that it must be deployed in a secure environment and relies on
trusted software components outside the scope of the TOE to protect against the misuse of commands by
authenticated users and to ensure proof of origin for commands received from remote clients. Attack
Potential attributed to attacks for non-physical attacks has been separately increased to ‘moderate’ from
‘enhanced basic’ throughout. A full description of differences is included in Section 2.2.
In real-world deployments the use of trusted software is either met by using the services of the
Cryptographic Module when configured as an embedded module inside Luna SA or as a stand-alone card
when used with supplied host software (non-TOE).
All TOE Security Functions are met by the Luna® PCI-E cryptographic module when installed in a
suitable environment and configured as per the supplied user guidance.
The Luna® PCI-E cryptographic module is a Hardware Security Module (HSM) in the form of a PCI-E
card that typically resides within a custom computing or secure communications appliance that is
operated in a controlled environment.
The TOE is ideally suited as a Hardware Security Module (HSM) for use in digital identity and data
protection applications. The Luna® PCI-E cryptographic module features true hardware key
management to maintain the confidentiality and integrity of digital signature and encryption keys. Key
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 14 of 111
material is generated, stored, and used exclusively within the secure confines of the Luna® PCI-E
cryptographic module to prevent compromise.
The Luna® PCI-E cryptographic module also provides advanced features like direct HSM-to-HSM
backup, split user role administration, and multi-person authentication.
1.3.1 TOE Components
The TOE encompasses the following components:
• Luna®
PCI-E Cryptographic Module:
o Firmware Version: 6.10.9
o Hardware Versions1 2
: 808-00015-001, 808-00015-003, 808-000052-001, 808-000053-001.
o Guidance Documentation: CR-4119, Luna PCI-E Cryptographic Module, Common Criteria
User Guidance, Revision 2.0 [24].
1.3.2 TOE Usage and Major Security Features
The TOE provides a physically and logically protected component for the performance of cryptographic
functions such as:
• key generation; symmetric (e.g. TDES, AES) keys and asymmetric key pairs (e.g. RSA, ECDSA),
• key storage,
• encryption and decryption using both symmetric and asymmetric cryptography, and
• digital signature generation and verification using RSA and ECDSA key pairs.
The TOE is comprised of processors, read-only and random-access memory, and firmware packages in a
tamper-resistant form. Access to TOE services is provided using supplied host software (non-TOE) that
interfaces to the Crypto Module using its PCI-E interface. Authentication is provided by interfacing to a
trusted PIN entry device, such as the Luna®
PED II.
1
the hardware version listed identifies the Luna®
PCI-E hardware alongside the non-reconfigurable
firmware loaded during production. Non-reconfigurable firmware includes: (i) the bootstrap for the crypto-
module and (ii) the configuration files for any one-time soft programmable discrete components
configured during manufacture. It is not possible for the user to identify the version of the bootstrap and
one-time programmable elements post manufacture independent of the hardware part number. Any
modification to these elements made by Safenet will result in a new part number.
2
a single HW part number (i.e. 808-XXXXX-XXX or 808-XXXXXX-XXX) identifies the TOE with 4 variants
being covered by this Security Target where each unique variant replaces ‘XXXXX-XXX’ with its unique
variant identifier e.g. ‘00015-002’. Hardware revisions associated with the part numbers reflect non-
security relevant changes to the product BOM such as work instructions or other non-security enforcing
components related to the construction of the TOE.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 15 of 111
Figure 1 – Example of Trusted PIN Entry Device (Luna® PED II) that can be used with the TOE
Before the TOE can be used to perform any cryptographic or key management functions, it must first be
initialised. Initialisation causes the cryptographic module’s contents (if any) to be erased and creates the
Security Officer (SO) for the cryptographic module. The SO must then set the configurable policies at the
cryptographic module level and create at least one partition, with a corresponding user in the Crypto
Officer role (creating a user in the Crypto User role is optional), to make the cryptographic module ready
for use. The SO may also be required to make policy settings at the partition level to conform to the
organization’s security requirements.
In operation, the TOE requires users in any of the three roles to be identified and authenticated before
they are authorised to perform any cryptographic or key management operations. Authentication is
performed using inputs from a trusted PIN entry device. Authentication mechanisms are enforced by the
TOE for all Security Officer, Crypto Officer and Crypto User roles.
1.3.3 TOE Type
The TOE is a host-attached hardware cryptographic module or HSM.
1.4 TOE Description
The TOE provides a physically and logically protected component for the performance of cryptographic
functions for key generation, key storage, encryption and decryption, key wrapping, secure key transport,
key establishment, digital signature generation and verification used by application systems that provide
cryptographic support functions such as a Certificate Authority/Certification Service Provider (CA) or Time
Stamp Authority (TSA). It includes processors, read-only and random-access memory, and firmware
enclosed in a tamper-resistant package.
Figure 2 shows the TOE and Figure 3 shows the TOE when configured as an embedded module inside
Luna® SA.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 16 of 111
Figure 2 – Luna® PCI-E Cryptographic Module (TOE)
Figure 3 - Luna® SA (TOE Embedded)3
Luna SA is the most common host for the Luna PCI-E Cryptographic Module and when acting as the host
system, it allows clients to authenticate to the TOE to access cryptographic services and in addition
provides the following capabilities outside the scope of the TOE:
• provision of secure channels between the Luna SA appliance and clients;
• management of sessions in multi-partition deployments to strictly enforce the use of allocated
session identifiers to authenticated clients;
• collection and management of audit data.
3
tamper label designs on Luna SA appliances may vary with the label shown being an example.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 17 of 111
The boundary of the TOE described in this ST encompasses the following:
• The Luna® PCI-E cryptographic module – a printed circuit board in PCI-E card format enclosed
within tamper-evident metal covers.
TOE Security Functions are contained within the Luna® PCI-E cryptographic module.
The Luna PCI-E cryptographic module includes Linux Kernel version 2.6.28 at its core.
The TOE supports cloning cryptographic objects using the cloning feature which implements
cryptographic protocols and mechanisms to protect the confidentiality of user data when transmitted
between distinct TOEs or between the TOE and another compatible Trusted IT Product.
1.4.1 TOE Roles
The following authenticated roles are supported by the TOE:
• Security Officer (SO) – authorised to install and configure the TOE, set and maintain security
policies, and to create and delete users (Crypto Officer and Crypto User roles). The TOE can
have only one Security Officer.
• Crypto Officer (CO) – authorised to create, use, destroy and backup/restore cryptographic
objects. The TOE can have only one Crypto Officer per partition (see below).
• Crypto User – authorised to use cryptographic objects (e.g., sign, encrypt/decrypt).
The Crypto Officer and Crypto User can communicate with the TOE for cryptographic operations using
PKCS #11 which is part of the IT Environment. The Security Officer uses a separate Command Line
Interface (CLI), which is part of the IT Environment, to send command data to perform hsm configuration,
to make security policy setting changes and to perform user creation/deletion. The CLI can also be used
by the Crypto Officer to initiate the cloning of cryptographic objects between distinct TOEs or between the
TOE and a compatible, Trusted IT Product via a Trusted Channel. The network channels used to provide
access to the CLI are a requirement of the IT environment.
The TOE allows for the creation of multiple users in the Crypto Officer and Crypto User roles. Each user
is created within a cryptographically separated partition in the Luna® PCI-E cryptographic module. Each
partition must have a user assigned to the Crypto Officer role (a maximum of one user assigned to the
Crypto Officer role is permitted). A partition may optionally assign a distinct user to the Crypto User role (a
maximum of one user assigned to the Crypto User role is permitted).
In Table 1-1 the roles supported by the TOE are compared to the roles defined in the PP [Cryptographic
Modules, Security Level “Enhanced Basic”] and PKCS#11.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 18 of 111
Function PP Role TOE Role PKCS#11 Role
Initialisation,
configuration
Administrator Security Officer Security Officer
Key Management Crypto Officer Crypto Officer User
Use End-User Crypto User N/A
Table 1-1 – Protection Profile to TOE Role Comparison
1.4.2 Cryptographic Services
The TOE provides the full range of cryptographic and key management functions. The major functions
supported by the TOE are listed below.
• Random Number Generation;
• Asymmetric (Public/Private) Key Pair Generation;
• Symmetric (Secret) Key Generation;
• Secure Key Material Storage and Access;
• Compute Digital Signatures and Verify Digital Signatures;
• Data Encryption / Decryption;
• Secret and Private Key Unwrapping (Import);
• Secret and Private Key Wrapping4
(Export);
• Key Cloning between HSMs (Backup);
• Key Derivation;
• Message Authentication Code generation.
1.4.3 Non-cryptographic Security Services
The TOE provides the following security services to support the protection of key material and
cryptographic services:
• User authentication;
• Access control for security administration functions;
• Access control for the creation and destruction of keys;
• Access control for usage of keys with cryptographic functions;
• Security audit;
• Self-test of the TOE.
1.4.4 Authentication
User authentication data is provided by means of a separate port and data path on the TOE. Trusted PIN
Entry Devices, such as the a Luna® PIN Entry Device II (Luna® PED II) can be connected directly to this
4
private key export is only available when CKE configuration option is enabled and the SO enables the
‘allow private key export’ policy setting. CKE configuration can by enabled by loading a signed
Configuration User File (CUF) that enables CKE (in preference to Cloning).
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 19 of 111
port. The trusted PIN entry device and software required to operate the trusted PIN entry device are the
responsibility of the IT Environment.
1.4.5 Configurable Policy Settings
The Luna® firmware is designed with the flexibility needed to support a number of product variants. The
main method used to control the behaviour of different products is a fixed set of “capabilities” set at the
factory by loading a signed Configuration Update File (CUF). The settings that are possible to make for
the TOE configuration are shown in sections 7.2.1 and 7.2.2. For each of the capabilities, a
corresponding policy element exists. The TOE provides security management functions by giving the SO
the ability to establish the policy that will govern the cryptographic module’s operation, according to the
requirements of the customer organization, by enabling/disabling or refining the corresponding policy
elements to equate to or to be more restrictive than the pre-assigned capabilities.
Policy set elements can only refine capability set elements to more restrictive values. Specifically, if a
capability is set to allow, the corresponding policy element may be set to either enable or disable.
However, if a capability is set to disallow, the corresponding policy element is set to disabled and is not
SO-configurable. Thus, an SO cannot use policy configuration to lift a restriction set in a capability
definition (i.e. using a CUF).
There are also several elements of the cryptographic module’s behaviour that are truly fixed for all
product variants and, therefore, are never subject to configuration by the SO. These fixed elements are
the following:
• Non-sensitive secret keys are not allowed;
• Non-sensitive private keys are not allowed;
• Non-private (Public) secret keys are not allowed;
• Non-private (Public) private keys are not allowed;
• Creation of secret keys and private keys through the PKCS #11 create object interface is not
allowed. That is, the API cannot be used to create keys by passing in known plaintext values.
The TOE is supplied with a fixed set of capabilities that are selected by the customer on purchase but can
be reconfigured once deployed by loading a new CUF which can be supplied by the HSM vendor and is
tailored for an individual HSM.
1.4.6 Cryptographic Module Capabilities
Refer to section 7.2.1 for a list of capabilities supported at the cryptographic module level.
1.4.7 Partition Capabilities
Refer to section 7.2.2 for a list of capabilities supported at the partition level.
1.4.8 Backup and Restoration
In order to support the backup and transparent recovery of the cryptographic keys and supporting data
stored within the Luna® PCI-E cryptographic module, the cloning capability can be employed. Each
Luna® PCI-E cryptographic module may have its cryptographic objects backed up using the Luna® Key
Cloning protocol to either a second Luna® PCI-E or a Luna® HSM Backup device. Conversely, the
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 20 of 111
cryptographic objects stored on a backup module may be restored to a properly initialised Luna® PCI-E
cryptographic module when bringing it into service.
1.4.9 Guidance Documentation
Guidance on the preparation and operation of the TOE in a manner compliant with common criteria and
the requirements in this Security Target is provided in CR-4119, Luna PCI-E Cryptographic Module,
Common Criteria User Guidance [24].
1.4.10 Environment
The TOE is used as the cryptographic module for a customer application that typically interfaces with the
cryptographic module using supplied (non-TOE) software.
For all deployments, the end user is responsible for meeting a number of obligations on both the IT and
physical environments originating for the ‘Security Objectives for the Operational Environment’ section of
this Security Target (Section 4.2) and outlined in greater depth in the Common Criteria User Guidance
document [24].
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 21 of 111
2 CONFORMANCE CLAIMS
2.1 CC Conformance Claim
Version: Common Criteria Version 3.1 R4 Part 1, Part 2, and Part 3
ST conformance:
CC Part 2- extended. The following non-Part 2 Security Functional Requirements are included to meet
specific requirements of the TOE:
• FCS_RNG.1 (Random Number Generation),
• FPT_EMS.1 (TOE emanation),
• FPT_TST.2 (Self-Testing).
CC Part 3 conformant to EAL 4 augmented. The EAL 4 package has been augmented by the addition of
the following Part 3 requirements:
• ALC_FLR.2 (Flaw Reporting Procedures),
• AVA_VAN.4 (Methodical vulnerability analysis).
2.2 Protection Profile Conformance Claim
This ST does not conform to any published Protection Profile but is written to be consistent with the
Security Problem Definition, Security Objectives and Security Functional Requirements of Protection
Profile [Cryptographic Modules, Security Level “Enhanced Basic”] with the following amendments:
• A.Env - Protected operating environment is added to protect against certain classes of physical
attacks on the TOE once deployed.
• A.Client_Management – this is added to ensure the environment takes responsibility for the
management of client commands to ensure only clients authorised to use certain identities
(issued during stateful interaction) attempt to access services using the identity.
• OE.Env and OE.Client_Management – have been added as objectives to embody the principals
introduced in the corresponding assumptions above.
• OSP.Resist_EnhBasic – has been renamed OSP.Resist_Moderate and updated to increase the
attack potential for attacks from ‘enhanced basic’ to ‘moderate’.
• O.Physical_Protect, FPT_PHP.1 and FPT_PHP.3 have been removed as this objective (and
corresponding SFR) are now covered by OE.Env.
• O.Key_Import and O.Key_Export have been updated to remove a requirement for integrity
protection of keys during import and export which is now covered by OE.Client_Management.
• O.Prevent_Inf_Leakage has been amended to only apply to attacks that can be performed from
outside the secure environment provided by OE.Env.
• Addition of AVA_VAN.4 instead of AVA_VAN.3 as an additional augmentation to EAL4 which
leads to the modification of a number5
of Threats, Objectives and Operating Security Policy to
5 The following items have been modified to reference ‘Moderate’ rather than ‘Enhanced Basic’: T.Compro_CSP,
T.Modif_CSP, T.Abuse_Func, T.Inf_Leakage, T.Malfunction, T.Physical_Tamper, T.Masquerade,
OSP.Resist_Moderate, O.Prevent_Inf_Leakage, OE.Assurance.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 22 of 111
reference ‘Moderate’ Attack Potential rather than ‘Enhanced Basic’. This brings the ST in line
with higher attack potential in [Cryptographic Modules, Security Level “Standard”].
• O.Red-Black Separation has been removed as a redundant objective in light of the addition of
A.Client_Management and the SFR supported by it being independently justified by
O.Key_Import, O.Key_Export and O.Key_Management.
• FDP_UCT.1 and FDP_UIT.1 have been removed as redundant functions given:
o Red-Black SFP is undefined in the original PP which makes these functions technically
unenforceable.
o The TOE environment provides confidential and integrity protection to user data and
integrity for PKCS #11 commands used to import and export keys through
OE.Client_Management.
o FCS_CKM.2/Private_Key_Import, FCS_CKM.2/ Secret_Symmetric_Key_Import and
FCS_CKM.2/ Private_Key_Export and FCS_CKM.2/ Secret_Symmetric_Key_Export
already provide additional confidentiality protection for the import and export of secret
and private keys.
• Roles throughout the ST have been updated to Luna equivalent names to those used in the PP to
tie in with User Documentation - Administrator has become Security Officer and End-User, the
Crypto User.
• Reference to the optional Maintenance Role has been dropped from the ST as it isn’t required by
the TOE6
.
• PP refinement to FCS_CKM.2 iterations for import and export of keys using the key wrapping has
been updated to remove the requirement for integrity protection of keys which is now provided by
OE.Client_Management for keys imported using this protocol7
. This is consistent with changes to
O.Key_Import and O,Key_Export covered above.
• Updates have been made to O.Key_Import, O.Key_Export, OE.Personnel and the refinements
present in all iterations of FCS.CKM.2 to remove reference to manual or split key entry and export
which are not supported by the TOE.
• ‘Key/CSP entry mode’ as used in FDP_ACF.1.4 has been updated to ‘Key Management Mode’ to
reflect the wider range of key life-cycle operations8
permissible in this mode.
• ‘time validity’ has been removed as a mandated TOE enforced attribute for objects resulting in
changes from the PP:
o Section 3.1.3 has been updated to remove ‘time validity’ as a mandated attribute;
o FDP_ACF.1.1/Key_Man and FDP_ACF.1.2/Oper have been updated to remove ‘time
validity’ as an attribute used for access control.
6
with the exception of FDP_ACF.1/Key_Man which is solely focused on the maintenance role. This SFR
has been retained to keep consistency with BSI-CC-PP-0078 but an application note has been added to
state the maintenance role and associated keys and CSP are not supported by the TOE.
7
the requirement for integrity protection is retained as a refinement for FCS_CKM.2/cloning_import and
FCS_CKM.2/cloning export that use the ‘Cloning Protocol’ which is used to transfer keys between HSM
and is not covered by OE.Client_Management.
8
Key Management mode includes the range of operations defined under Key Management in the
glossary including: ‘handling of cryptographic keys and other related security parameters (e.g., IVs and
passwords) during the entire life cycle of the keys, including their generation, storage, establishment,
entry and output, and destruction’.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 23 of 111
o FDP_ITC.2.5, FDP_ETC.2.4 and FPT_TDC.1 have been updated to remove ‘time
validity’ as a mandated attribute to transfer and to maintain consistency off, during user
data import and export.
o FMT_MSA.1/Key_Man_1, FMT_MSA.1/Key_Man_2, FMT_MSA.2 have been updated to
remove ‘key validity time period’ as an attribute to control.
o FPT_STM.1 has been removed as it is was only required as a dependency to support
enforcement of ‘time validity’ as an object attribute.
o FMT_MSA.1/Key_Man_1 and FMT_MSA.1/Key_Man_2 have been re-written to correct
mistakes in the original PP and to align them with the Key Management SFP and roles as
defined for the module.
• Pairwise consistency test on generation of asymmetric keys as covered in the refinement to
FPT_TST.2 in the PP has been simplified to a ‘sign/verify’ omitting the ‘encrypt/decrypt’ test
covered in the PP.
New assumptions and objectives for the environment that have been introduced or SFR that have been
added or significantly altered have been marked with a (*) in their title to clearly identify them to the
reader.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 24 of 111
3 SECURITY PROBLEM DEFINITION
3.1 Introduction
This Security Target (ST) describes the security problem for cryptographic modules, which may provide a
wide range of cryptographic security functions depending on the intended protection of the user data. This
intended protection of primary assets is addressed by organisational security policies. The TOE protects
the user data in confidentiality and integrity. The use of cryptographic methods implies specific threats,
which are common for all TOEs as cryptographic modules.
3.1.1 Assets
The cryptographic module is intended to protect, as primary assets, User Data in the form of wrapped
secret and private keys as input. User Data is only exported from the TOE as wrapped secret keys when
leaving the TOE boundary.
The cryptographic keys need protection as the primary assets they protect and depending on the
cryptographic technique they are used for:
• Secret keys of symmetric cryptographic algorithms and protocols need protection in
confidentiality and integrity.
• Private keys of asymmetric cryptographic algorithms and protocols need protection in
confidentiality and integrity.
• Public keys of asymmetric cryptographic algorithms and protocols need protection in integrity
and authenticity.
The cryptographic module also accepts Red Data in the form of:
• Plaintext data provided by the IT Environment containing information, which need protection in
confidentiality.
• Original data containing information, which need protection in integrity or a proof of origin and
authenticity to third parties.
• ICD Command Data, including client-application identifying data
The use of cryptographic algorithms and protocols requires the protection of the cryptographic keys as
primary assets.
Where the need of confidentiality of secret and private keys follows directly from the cryptographic
technique the integrity protection for these keys prevents indirect attacks (e.g. substitution of an unknown
secret key by a known key compromise the subsequent encryption of plaintext data, an undetected
modification of a private key may enable attacks against this key).
The CC deals with cryptographic keys as user data and as TSF data depending on their specific use by
the TSF. Cryptographic keys are user data in the terminology of CC if they are used to protect
cryptographically the confidentiality or integrity of data provided by the IT system, or to transform
“cryptographically protected (encrypted) data” into “cryptographically unprotected (decrypted) data” by
cryptographic functions. Encryption and decryption keys are examples of such keys. Cryptographic keys
are TSF data in the terminology of CC if their information is used by the TSF in making security-relevant
decisions. Root public keys are examples of cryptographic keys as TSF because they are used to verify
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 25 of 111
the authenticity of all other public keys of the public key infrastructure, which may be provided by any
user. Public keys may be used as reference authentication data for external entities as user of the TOE.
3.1.2 Roles
The section has been updated from [Cryptographic Modules, Security Level “Enhanced Basic”] to map the
roles as defined in the PP to those used on Luna PCI-E and covered in Table 1-1. The re-defined roles
are used throughout subsequent sections of the document. This ST retains all mandated roles as listed
in the PP.
Roles Description
Security Officer9
An authorised user who has been granted the authority to manage the
TOE. These users are expected to use this authority only in the manner
prescribed by the guidance given to them.
Crypto Officer
An authorised user who has been granted the authority to perform
cryptographic initialization and management functions. These users are
expected to use this authority only in the manner prescribed by the
guidance given to them.
Crypto User10 An authorised user assumed to use general security services, including
cryptographic operations and other Endorsed security functions.
Unidentified User A user not being identified.
Unauthenticated User An identified user not being authenticated.
Table 3-1 – Roles
The term “user” is used to include both authorised and unauthorised users. Authorized users are known
to the TOE and their security attributes are maintained by the TOE as prerequisite for their identification
and authentication. Unauthorised users are unknown to the TOE. An authenticated authorised user is an
authorised user that has been successfully authenticated for one or more of the following roles: Security
Officer, Crypto Officer or Crypto User role.
A user in the Crypto User role may be a human user or an IT system communicating with the TOE.
The TOE maintains at least the following security attributes of authorised users:
(1) User identity that uniquely identifies the user,
(2) Role for which the user is authorised.
and TSF data
(3) Reference Authentication Data for users.
The TOE maintains at least the following security attributes of subjects:
(1) Identity of the user bound to this subject,
(2) Role for which this user is currently authenticated.
9
equivalent to the Administrator role in the PP.
10
equivalent to the End User role in the PP.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 26 of 111
3.1.3 Objects
The following objects are defined in [Cryptographic Modules, Security Level “Enhanced Basic”]. The full
list of objects has been retained in this Security Target to cover of range of operations performed by the
TOE.
Object Description
Plaintext data
Red-Data encoded in a public known way which will be transformed by an encryption
algorithm implemented in the TOE into ciphertext data (i.e. plaintext input data) or
which is the result of decryption of the corresponding ciphertext data by the TOE (i.e.
plaintext output data).
Ciphertext data
Black-data as result of the application of an encryption algorithm to plaintext data
and an encryption key. The knowledge of ciphertext data by an attacker does not
compromise the confidential information represented by the corresponding plaintext.
Cryptographic keys
Parameters used in conjunction with a cryptographic algorithm that determines the
transformation of plaintext data into ciphertext data, the transformation of ciphertext
data into plaintext data, a digital signature computed from data, the verification of a
digital signature computed from data, a message authentication code computed from
data, a proof of the knowledge of a secret, a verification of the knowledge of a secret
or an exchange agreement of a shared secret.
Cryptographic key
component
Parameters used in split knowledge procedures for manual key export methods and
manual key import methods.
Critical security
parameters
Security-related information (e.g. secret and private cryptographic keys, and TSF
data like authentication data) whose disclosure or modification can compromise the
security of a cryptographic module.
Digital signature
The result of an (asymmetric) signature-creation algorithm applied to the original
data using a signature-creation key. The digital signature may contain or be
appended to the original data.
Message
authentication code
(MAC)
The result of a (symmetric) message authentication algorithm applied to the original
data using a message authentication key. The MAC will be appended to the original
data.
Table 3-2 – Objects
Critical security parameters (CSP) have at least the security attributes:
(1) Identity of the CSP that uniquely identifies the CSP,
(2) CSP usage type identifying the purpose and methods of use of the CSP,
(3) CSP access control rules.
The CSP access control rules may restrict the access for operation like import or export of the key.
Cryptographic keys have at least the security attributes:
(1) Identity of the key that uniquely identifies the key,
(2) Key entity, i.e. the identity of the entity this key is assigned to,
(3) Key type, i.e. secret key, private key, public key,
(4) Key usage type, i.e. the cryptographic algorithms a key can be used for
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 27 of 111
(5) Key access control rules.
The security attribute “key usage type” shall identify the cryptographic algorithm the key is intended to be
used and may contain information about the rank of this key in a key hierarchy, and other information.
The security attribute “Key access control rules” restricts the access for operation like import or export of
the key.
Cryptographic key components have at least the security attributes
(1) Key component identity that uniquely identifies the key component,
(2) Key entity, i.e. the identity of the key the key component belongs to,
(3) Key entry method, i.e. the method the key component is used for.
Furthermore cryptographic keys, key components and CSP may be distinguished as
• Operational if they are used to protect user data,
• Maintenance if they are used for maintenance of the TOE by maintenance personnel only11
.
Please take note that data used internally by known answer self-test of the TOE instead of cryptographic
keys are seen neither as operational nor as maintenance keys (CSP).
3.1.4 Operations
The following objects are defined in [Cryptographic Modules, Security Level “Enhanced Basic”]. The full
list of objects has been retained in this Security Target to cover of range of operations performed by the
TOE.
Operation Description
Decryption Processes a decryption algorithm to the ciphertext data using the decryption
key and returns the corresponding plaintext data.
Encryption Processes an encryption algorithm to the plaintext data using the encryption
key and returns the corresponding ciphertext data.
Export of key Output of cryptographic keys in protected form.
Export of protected
data
Output of user data with or without security attributes to the black area of the
IT system protected in confidentiality or integrity or both by cryptographic
security functions of the TOE.
Export of
unprotected data
Output of user data with or without security attributes to the red area of the IT
system cryptographically protected by cryptographic security functions of the
TOE.
Import of key Input of cryptographic keys in protected form.
Import of protected
data
Input of user data with or without security attributes from the black area of
the IT system where the cryptographic security functions of the TOE support
the protected in confidentiality by decryption or in integrity by detection
modification or verification of data origin.
11
The TOE does not support a maintenance role or the concepts of maintenance cryptographic keys, key
components and CSP. These concepts are retained in this section for consistency with Protection Profile
– BSI-CC-PP-0078 only.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 28 of 111
Operation Description
Import of
unprotected data
Input of user data with or without security attributes to the red area of the IT
system cryptographically unprotected by cryptographic security functions of
the TOE.
MAC calculation
Processes a (symmetric) MAC algorithm to the original data using the secret
message authentication key and returns the corresponding Message
Authentication Code.
MAC verification
Processes a (symmetric) MAC algorithm to the presented user data and
MAC using the secret message authentication key and returns the result of
checking whether the user data, the MAC and the key fit together (integrity
confirmed) or not (integrity not confirmed).
Signature-creation
Processes a (asymmetric) signature-creation algorithm to the original data
using the private signature-creation key of the signatory and returns the
corresponding digital signature.
Signature-
verification
Processes a (asymmetric) signature-verification algorithm to the signed data
and the digital signature using the public key and returns the result of
checking whether the original data, the electronic signature and the public
key fit together (integrity confirmed) or not (integrity not confirmed).
Use of key Use of the cryptographic key by a cryptographic algorithm as key parameter.
Table 3-3 – Operations
3.2 Threats
Threat statements are taken directly from [Cryptographic Modules, Security Level “Enhanced Basic”],
Section 3.2 with the only modification being the increase of attack potential from ‘Enhanced Basic’ to
‘Moderate’.
3.2.1 T.Compro_CSP – Compromise of confidential CSP
An attacker owing moderate attack potential may compromise confidential CSP like secret keys, private
keys or authentication data, which enables attacks against the confidentiality or integrity of user data
protected by these CSPs or the TSF using these CSPs as TSF data.
3.2.2 T.Modif_CSP – Modification of integrity-sensitive CSP
An attacker owing moderate attack potential may modify integrity-sensitive CSP like permanent stored
public keys and therefore compromise the confidentiality or integrity of user data protected by these CSPs
or the TSF using these CSPs as TSF data.
3.2.3 T.Abuse_Func – Abuse of function
An attacker owing moderate attack potential may use TOE functions intended for installation,
configuration or maintenance of the TOE which shall not be used for operational cryptographic keys or
user data in order (i) to disclose or manipulate operational CSP or user data, or (ii) to enable attacks
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 29 of 111
against the integrity or confidentiality of operational CSP or user data by (ii.a) manipulating (explore,
bypass, deactivate or change) security features or functions of the TOE or (ii.b) disclosing or manipulating
TSF Data.
3.2.4 T.Inf_Leakage – Information leakage
An attacker owing moderate attack potential may observe and analyse any energy consumed or emitted
through the cryptographic boundary (i.e. including the external interfaces) of the TOE to get internal
secrets (especially secret or private cryptographic keys) or confidential user data not intended for export.
The information leakage may be inherent in the normal operation or caused by the attacker.
3.2.5 T.Malfunction – Malfunction of TSF
An attacker owing moderate attack potential may use a malfunction of the hardware or software, which is
accidental or deliberated by applying environmental stress or perturbation, in order to deactivate, modify,
or circumvent security functions of the TOE to enable attacks against the integrity or confidentiality of the
User data or the CSP.
3.2.6 T.Physical_Tamper – Physical tampering
An attacker owing moderate attack potential may tamper the cryptographic module to get secrets, to
modify data on whose integrity the TSF relies, or to corrupt or de-activate the TSF inside the
cryptographic boundary to violate the integrity or confidentiality of the User data, the CSP or the TSF
data.
3.2.7 T.Masquerade – Masquerade authorized data source or receiver
An attacker owing moderate attack potential may masquerade as an authorized data source or receiver to
perform operations that will be attributed to the authorized user or may gain undetected access to
cryptographic module causing potential violations of integrity or confidentiality of the User data, the CSP
or the TSF data.
3.3 Organisational Security Policies
Organisational Security Policy statements are taken directly from [Cryptographic Modules, Security Level
“Enhanced Basic”], Section 3.3. with the only modifications being the increase of attack potential from
‘Enhanced Basic’ to ‘Moderate’, minor rewording of roles to match those used on Luna.
3.3.1 OSP.User_Data_Prot – Protection of user data by cryptographic
functions
The cryptographic module will be used to protect the confidentiality and/or integrity of information
represented by user data which may be get known or modified by an attacker. The IT system will ensure
the availability of the user data and the cryptographic keys outside the cryptographic module.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 30 of 111
3.3.2 OSP.Resist_Moderate – Resistance against moderate attack
potential (*)
The TOE shall resist attacks all attacks on the module with moderate attack potential.
3.3.3 OSP.I&A – Identification and authentication of users
All users shall be identified and authenticated prior to accessing any controlled resources with the
exception of read access to public objects and cryptographic operations with public keys.
3.3.4 OSP.Access – Access control of TOE functions
The TOE shall limit the extent of each user’s abilities to use the TOE functions in accordance with the
security function policies.
3.3.5 OSP.Roles – Roles
The authorized Security Officer, Crypto Officer and Crypto User shall have separate and distinct roles
associated with them.
3.3.6 OSP.Endorsed_Crypto – Endorsed cryptographic functions only
The TOE shall implement Endorsed cryptographic algorithms and Endorsed cryptographic protocols for
the protection of the confidentiality and/or the integrity of the user data according to the organizational
security policy OSP.User_Data_Prot and for the cryptographic key management according to the
organizational security policy OSP.Key_Man. The cryptographic module must not provide any non-
Endorsed cryptographic function.
3.3.7 OSP.Key_Man – Cryptographic key management
The CSP, cryptographic keys and cryptographic key components are assigned to cryptographic
algorithms and protocols they are intended to be used with and the entities, which are allowed to use
them.
3.3.8 OSP.Key_Personnel – Personnel security for cryptographic keys
The cryptographic keys shall be managed in such a way that their integrity and confidentiality cannot be
compromised by a single person.
3.4 Assumptions
Existing assumptions from [Cryptographic Modules, Security Level “Enhanced Basic”], Section 3.4 of the
referenced PP are retained but have been be expanded to include two new assumptions (A.Env and
A.Client_Management) as already covered in Section 2.2.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 31 of 111
3.4.1 A.User_Data – Protection of user data by the IT system
The TOE environment uses the TOE for cryptographic protection of user data for transmission over
channels or storage in media, which are not protected against access by unauthorised users. The TOE
environment provides cryptographically unprotected user data to the TOE and identifies protection in
confidentiality and/or integrity to be provided by the TOE.
3.4.2 A.Data_Sep – Separation of cryptographically protected and
unprotected data
The TOE environment separates the cryptographically unprotected data from the cryptographically
protected user data in the IT system.
3.4.3 A.Key_Generation – Key generation and import to the
cryptographic module
Cryptographic keys generated by the IT environment and imported into the TOE are cryptographically
strong for the intended key usage and have secure security attributes.
3.4.4 A.Availability – Availability of keys
The TOE environment ensures the availability of cryptographic keys, key components, CSP and keying
material.
3.4.5 A.Env – Protected operating environment (*)
The TOE operates in a protected environment that limits physical access to the TOE to authorised
individuals and protects against all physical attacks that could lead to compromise of the objectives of the
TOE.
3.4.6 A.Client_Management – Correct data supplied by client
applications (*)
Any host supporting the TOE shall:
• manage messages exchanged between the TOE and client to ensure only clients authorised to
use certain identities (issued during stateful interaction) attempt to access services using the
identity.
• ensure proof of origin for messages passed to the host from clients prior to these being passed to
the TOE.
• ensure the confidentiality and integrity of User Data in transit between clients and the TOE12
.
12
This is explicitly noted as not including confidentiality protection of cryptographic keys which are
already provided confidentiality protection under O.Key_Import and O.Key_Export.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 32 of 111
4 Security Objectives
This section identifies and defines the security objectives for the TOE and its environment. Security
objectives reflect the stated intent and counter the identified threats, as well as comply with the identified
organisational security policies and assumptions. Section 4.1 and Section 4.2 are taken from
[Cryptographic Modules, Security Level “Enhanced Basic”] with the following changes:
• new Security Objectives for the Environment to address A.Env and A.Client_Management have
been added.
• Role titles have been updated to tie in with those used by Luna but without a change in definition
from those used in the PP.
• O.Key_Import and O.Key_Export have been updated to remove requirement to ensure integrity of
keys which is now covered by OE.Client_Management.
• O.Prevent_Inf_Leakage has been updated to only apply to attacks that can be performed from
outside the secure environment. This avoids a conflict with OE.Env that already protects the TOE
from direct attacks.
• OE.Personnel has been updated to remove reference to manual key or split key component
loading which is not supported by the TOE.
4.1 Security Objectives for the TOE
4.1.1 O.Endorsed_Crypto – Endorsed cryptographic functions
The TOE shall provide Endorsed cryptographic functions and Endorsed cryptographic protocols to protect
the user data as required by OSP.User_Data_Prot and for key management.
4.1.2 O.I&A – Identification and authentication of users
The TOE shall uniquely identify users and verify the claimed User identity before providing access to any
controlled resources with the exception of read access to public objects.
4.1.3 O.Roles – Roles known to TOE
The TOE shall provide at least the Security Officer, the Crypto Officer, and the Crypto User roles.
4 . 1 . 4 O.Control_Services – Access control for services
The TOE shall restrict the access to its services, depending on the user role, to those services explicitly
assigned to this role. Assignment of services to roles shall be either done by explicit action of a Security
Officer or by default.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 33 of 111
4.1.5 O.Control_Keys – Access control for cryptographic keys
The TOE shall restrict the access to the keys, key components and other CSP according to their security
attributes. Cryptographic keys intended for the use with Endorsed cryptographic functions must not be
used by any non-endorsed functions.
4.1.6 O.Key_Export – Export of cryptographic keys
The TOE shall export cryptographic keys with their security attributes. The TOE shall ensure the
confidentiality of secret and private keys exporting them in encrypted form to authorized entities only.
4.1.7 O.Key_Generation – Generation of cryptographic keys by the TOE
The TOE shall generate cryptographic strong keys using Endorsed cryptographic key generation
algorithms.
4.1.8 O.Key_Import – Import of cryptographic keys
The TOE shall import keys with security attributes. The TOE shall import secret or private keys in
encrypted form.
4.1.9 O.Key_Management – Management of cryptographic keys
The TOE shall securely manage cryptographic keys, cryptographic key components and CSP. The TOE
shall associate security attributes of the entity the key is assigned to and of the intended cryptographic
use of the key. Assignment of the security attributes to the cryptographic keys, cryptographic key
components and CSP shall be either done by explicit action of a Crypto Officer or by default.
4.1.10 O.Key_Destruction – Destruction of cryptographic keys
The TOE shall destruct in a secure way the keys cryptographic key components and other CSP on
demand of authorised users or when they will not be used any more that no information about these keys
is left in the resources storing or handling these objects before destruction.
4.1.11 O.Check_Operation – Check for correct operation
The TOE shall perform regular checks to verify that its components operate correctly. This includes
integrity checks of TOE software, firmware, internal TSF data and keys during initial start-up, at the
request of the authorised user, and at the conditions installation and maintenance.
4.1.12 O.Prevent_Inf_Leakage – Prevent leakage of confidential
information
The TOE shall prevent information leakage about secret and private keys and confidential TSF data
outside the cryptographic boundary and unintended output confidential user information. The TOE shall
resist attacks with moderate attack potential, which are based on information leakage and that can be
performed from outside the secure environment.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 34 of 111
4.2 Security Objectives for the Operational Environment
4.2.1 OE.Assurance – Assurance Security Measures in Development
and Manufacturing Environment
The developer and manufacturer ensure that the TOE is designed and fabricated so that it requires a
combination of complex equipment, knowledge, skill, and time to be able to derive detailed design
information or other information which could be used to compromise security through attack. The
developer provides necessary evaluation evidence that the TOE fulfils its security objectives and is
resistant against attack with moderate attack potential.
4.2.2 OE.Key_Generation – Key generation by IT environment
The IT environment shall ensure the cryptographic strength, the confidentiality and integrity of secret and
private keys, the integrity and authenticity of public keys and correct security attributes if they are
generated outside the TOE and imported into the TOE.
4.2.3 OE.Red-Black-Sep – Separation of red and black area of the IT
system
The TOE environment protects the user data in the red area of the IT system and controls the exchange
data between the red and black area of the IT system according to the IT security policy. It provides the
red data with their security attributes for cryptographic protection to the TOE and receives red data with
their security attributes from the TOE.
4.2.4 OE.Personnel – Personnel security
The Security Officer, Crypto Officer, Crypto User roles, shall be assigned with distinct authorised persons.
4.2.5 OE.Key_Availability – Availability of cryptographic key and key
material
The IT environment shall ensure the availability of the user data, cryptographic keys key components,
CSP and keying material.
4.2.6 OE.Env – Protected operating environment (*)
The TOE shall operate in a protected environment that limits physical access to the TOE to authorised
individuals. The TOE software and hardware environment shall be maintained in a secure state that
mitigates the specific risks applicable to the deployment environment.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 35 of 111
4.2.7 OE.Client_Management (*)
Any host supporting the TOE shall:
• manage messages exchanged between the TOE and client to ensure only clients authorised to
use certain identities (issued during stateful interaction) attempt to access services using the
identity.
• ensure proof of origin for messages passed to the host from clients prior to these being passed to
the TOE.
• ensure the confidentiality and integrity of User Data in transit between clients and the TOE13
.
4.3 Security Objectives Rationale
The organisational security policy OSP.User_Data_Prot “Protection of user data by cryptographic
functions” addresses the protection of the confidentiality and/or integrity of information represented by
user data of the IT-system to be provided by the cryptographic module and the protection of availability of
user data by the IT system. The security objective O.Endorsed_Crypto ensures that TOE provides
Endorsed cryptographic functions to protect the user data as required by OSP.User_Data_Prot. The
security objective for the IT environment OE.Key_Availability ensures that IT system protects the
availability of the user data and the cryptographic keys outside the cryptographic module.
The organisational security policy OSP.Resist_Moderate “Resistance against moderate attack potential”
requires the TOE to resist attacks with moderate attack potential. This is ensured by the security objective
for the development environment OE.Assurance (cf. to last sentence) and OE.Env relating to it being
deployed in a protected operating environment. The security objectives O.I&A, O.Prevent_Inf_Leakage
address directly the resistance against attacks with moderate attack potential that can be performed from
outside the controlled environment.
The organisational security policy OSP.I&A “Identification and authentication of users” addresses
identification and authentication of all users prior to accessing any controlled resources with the exception
of public objects. This is directly ensured by the security objective O.I&A.
The organisational security policy OSP.Access “Access control of TOE functions” addresses the
limitation of the extent of each user’s abilities to use the TOE functions in accordance with the security
function policies. The security objective O.Control_Services requires that the TOE shall restrict the access
to its services, depending on the user role, to those services explicitly assigned to this role which are
provided according to the security objective O.Roles. The security objective O.Control_Keys limits user’s
ability to use the TOE functions to ensure the cryptographic security as part of the security function
policies. The environmental objective OE.Client_Management adds a secondary layer of to provide
stateful management of users.
The organisational security policy OSP.Roles “Roles” addresses separate and distinct roles for
authorised Security Officer, Crypto Officer and Crypto User. The security objective O.Roles requires the
TOE to implement them and the security objective OE.Personnel requires the IT environment to use
them.
The organisational security policy OSP.Endorsed_Crypto “Endorsed cryptographic functions” addresses
the implementation of Endorsed cryptographic algorithms and Endorsed cryptographic protocols for the
protection of the confidentiality and/or the integrity of the user data according to the organizational
13
This is explicitly noted as not including confidentiality protection of cryptographic keys which are
already provided confidentiality protection under O.Key_Import and O.Key_Export.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 36 of 111
security policy OSP.User_Data_Prot and for the key management. This is ensured generally by the
security objective O.Endorsed_Crypto.
The security objective OSP.Key_Man “Cryptographic key management” requires to manage and use the
cryptographic keys as they are assigned to the entities, cryptographic algorithms and protocols. This OSP
is implemented generally by the security objectives for the TOE O.Key_Management for secure key
management and specifically for critical processes over the key life cycle by the security objectives
O.Key_Generation, O.Key_Import, O.Key_Export and O.Key_Destruction. OE.Key_Generation ensures
the cryptographic strength, the confidentiality and integrity of secret and private keys, the integrity and
authenticity of public keys and correct security attributes if they are generated outside the TOE and
imported into the TOE. OE.Client_Management provides integrity protection for keys (and any associated
attributes during import and export of wrapped packages).
The organisational security policy OSP.Key_Personnel “Personnel security for cryptographic keys”
addresses key management in a way that the integrity and confidentiality of key cannot be compromised
by a single person. This OSP is implemented generally by the security objectives O.Key_Management
and O.Control_Keys for secure key management and use. Furthermore for critical processes, the security
objectives O.Key_Import, O.Key_Export and O.Control_Keys enforce secure key import, key export and
key usage. O.I&A ensures that the TOE uniquely identifies users and verifies the claimed User identity
before providing access. OE.Personnel requires assignment of roles to distinct authorised persons and
that for manual key import at least two different authorised persons are assigned to Crypto Officer role.
OE.Client_Management ensures stateful management of commands sent between the TOE and clients.
The threat T.Compro_CSP “Compromise of CSP” addresses the compromise of confidential CSP which
enables attacks against the confidentiality or integrity of user data and TSF data protected by these
CSPs. The security objective O.Control_Keys requires the TOE to restrict the access to the keys, key
components and CSP according to their security attributes. The security objective O.Key_Management
ensures these security attributes are managed securely. The security objective O.Key_Export and
O.Key_Import require the protection of secret or private keys in encrypted. The security objective
O.Key_Generation requires the TOE and OE.Key_Generation requires the environment to generate
cryptographic strong keys. O.Key_Destruction requires the secure destruction on demand of user. The
security objective O.Prevent_Inf_Leakage requires the TOE to prevent information leakage about secret
and private keys and confidential TSF data that can be intercepted from outside the secure environment
provided by OE.Env. Physical tampering attempts aiming at compromising CSPs are countered by the
environment as addressed by OE.Env. OE.Client_Management provides protection against any attempts
to hijack an authenticated and active session.
The threat T.Modif_CSP “Modification of integrity-sensitive CSP” addresses the modification of the
integrity-sensitive CSP which enables attacks against the confidentiality or integrity of user data or the
TSF protected by these CSPs. The security objective O.Control_Keys requires the TOE to restrict the
access to the keys, key components and CSP according to their security attributes. The security objective
O.Key_Management ensures these security attributes are managed securely. The security objective
O.Check_Operation requires verification the integrity of CSP. OE.Env provides protection against direct
attacks on the cryptographic module looking to modify or replace CSP. OE.Client_Management provides
protection against the hijack of authenticated sessions that could lead to the deletion of CSP and integrity
protection for wrapped keys during import and export as part of messages exchanges between the TOE
and client.
The threat T.Abuse_Func “Abuse of function” addresses the misuse of TOE functions intended for
installation, configuration or maintenance which shall not be used for operational cryptographic keys or
user data. This is ensured by the security objective O.Control_Services that restricts the access to TOE
services, depending on the user role, to those services explicitly assigned to this role. The security
objective O.Roles requires the TOE to provide at least the Security Officer, the Crypto Officer, the Crypto
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 37 of 111
User roles. The Security Officer, Crypto Officer, Crypto User roles will be assigned to authorised distinct
persons according to the security objective for the IT environment OE.Personnel.
OE.Client_Management provides protection against the hijack of authenticated sessions.
The threat T.Inf_Leakage “Information leakage” describes that an attacker may observe and analyse any
energy consumed or emitted through the cryptographic boundary (i.e. including the external interfaces) of
the TOE to get internal secrets or confidential user data not intended for export. The protection against
this threat is directly required by the security objective O.Prevent_Inf_Leakage and supported by OE.Env
to defend against direct attacks on the cryptographic module.
The threat T.Malfunction “Malfunction of TSF” describes the use of a malfunction of the hardware or
software in order to deactivate, modify, or circumvent security functions of the TOE to enable attacks
against the integrity or confidentiality of the User data or the CSP. The security objective
O.Check_Operation prevents this threat by regular checks verifying that TOE components operate
correctly.
The threat T.Physical_Tamper “Physical tampering” describes tampering the cryptographic module to
get secrets, to modify data on whose integrity the TSF relies, or to corrupt or deactivate the TSF inside
the cryptographic boundary, which is directly addressed by the inclusion of OE.Env to ensure the
environment protects against direct physical tampering of the TOE.
The threat T.Masquerade “Masquerade authorised data source or receiver” describes that an attacker
may masquerade as an authorised data source or receiver to perform operations that will be attributed to
the authorised user or gains undetected access to cryptographic module causing potential violations of
integrity, or confidentiality. The security objective O.I&A requires the TOE to identify and authenticate the
user before providing access to any controlled resources with the exception of public objects. The
security objective O.Control_Keys restricts the access to the keys, key components and other CSP
according to their security attributes (including Key entity). OE.Client_Management provides protection
against any attempts to hijack an authenticated and active session.
The assumptions A.User_Data “Protection of user data by the IT system” and A.Data_Sep “Separation of
cryptographically protected and unprotected data “ are covered by the security objective for the IT
environment OE.Red-Black-Sep “Separation of red and black area of the IT system” dealing with
protection of the user data in the red area of the IT system, their security attributes for cryptographic
protection to the TOE and the control the exchange data between the red and black area of the IT system
according to the IT security policy.
The assumption A.Key_Generation “Key generation and import to the cryptographic module” deals with
the cryptographic strength and secure security attributes of cryptographic keys generated by the IT
environment and imported into the TOE. This assumption is directly and completely covered by the
security objective for the IT environment OE.Key_Generation.
The assumption A.Availability “Availability of keys” describes that the IT environment ensures the
availability of cryptographic keys and keying material as ensured by the security objective for the IT
environment OE.Key_Availability.
The assumption A.Env “Protected Operating Environment” requires the environment protect the TOE
against direct physical attacks which is ensured by the security objective for the environment OE.Env.
The assumption A.Client_Management requires the stateful management of commands sent and
received by the TOE alongside integrity and confidentiality protection of message from Users
authenticated to the TOE which is ensured by the security objective for the environment
OE.Client_Management.
Refer to Section 8 for detailed mappings and descriptions of the rationale for the Security Objectives, IT
Security Requirements and Dependencies, Assurance Measures, and Security Functional Requirements.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc., All rights reserved.
Page 38 of 111
Table 4-1 provides an overview for security objectives rationale.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 39 of 111
OSP.User_Data_Prot
OSP.Resist_Moderate(*)
OSP.I&A
OSP.Access
OSP.Roles
OSP.Endorsed_Crypto
OSP.Key_Man
OSP.Key_Personnel
T.Compro_CSP
T.Modif_CSP
T.Abuse_Func
T.Inf.Leakage
T.Malfunction
T.Physical_Tamper
T.Masquerade
A.User_Data
A.Data_Sep
A.Key_Generation
A.Availability
A.Env(*)
A.Client_Management(*)
O.I&A X X X X
O.Control_Services X X
O.Control_Keys X X X X X
O.Roles X X X
O.Key_Export X X X
O.Key_Generation X X X
O.Key_Import X X X
O.Key_Management X X X X
O.Key_Destruction X X
O.Check_Operation X X
O.Endorsed_Crypto X X
O.Prevent_Inf_Leakage(*) X X X
OE.Assurance X
OE.Key_Generation X X X
OE.Red-Black-Sep X X
OE.Personnel X X X
OE.Key_Availability X X
OE.Env(*) X X X X X X X
OE.Client_Management(*) X X X X X X X
Table 4-1 – Security Objectives Rationale
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 40 of 111
5 Extended Components Definition
The following non Part 2 Security Functional Extended Component is included to meet specific
requirements of the TOE.
5.1 Definition of the Family FCS_RNG
Family behaviour
This section describes the functional requirements for the generation of random numbers, which may be
used as secrets for cryptographic purposes or authentication. The IT security functional requirements for
a TOE are defined in an additional family (FCS_RNG) of the Class FCS (Cryptographic support). The
requirements address the type of the random number generator as defined in AIS 20 [9] and AIS 31 [10]
and quality of the random numbers.
Component levelling
FCS_RNG.1 Generation of random numbers requires that the random number generator implements
defined security capabilities and that the random numbers meet a defined quality metric.
Management: FCS_RNG.1
There are no management activities foreseen.
Audit: FCS_RNG.1
There are no actions defined to be auditable.
FCS_RNG.1 Random number generation
Hierarchical to: No other components.
Dependencies: No dependencies
FCS_RNG.1.1 The TSF shall provide a [selection: physical, non-physical true, deterministic, hybrid
physical, hybrid deterministic] random number generator that implements: [assignment: list of security
capabilities].
FCS_RNG.1.2 The TSF shall provide random numbers that meet [assignment: a defined quality metric].
5.2 Definition of the Family FPT_EMS
Family behaviour
This family defines requirements to mitigate intelligible emanations.
Component levelling
FPT_EMS.1 TOE Emanation
Management: FPT_EMS.1
There are no management activities foreseen.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 41 of 111
Audit: FPT_EMS.1
There are no actions defined to be auditable.
FPT_EMS.1 TOE Emanation
Hierarchical to: No other components.
Dependencies: No dependencies
FPT_EMS.1.1 The TOE shall not emit [assignment: types of emissions] in excess of [assignment:
specified limits] enabling access to [assignment: list of types of TSF data] and [assignment: list of types of
user data].
FPT_EMS.1.2 The TSF shall ensure [assignment: type of users] are unable to use [assignment: types of
interfaces/ports] to gain access to [assignment: list of types of TSF data] and [assignment: list of types of
user data].
5.3 Definition of the Security Functional Component
FPT_TST.2
The following additions are made to “TSF self-test (FPT_TST)” in Common Criteria, Part 2 to require the
self-testing of TSF and of the integrity of the TSF-data and TSF-executable code. FPT_TST.2 requires
the behaviour of TSF during self-testing and the actions to be performed by TSF in dependency of the
results of the self-testing. This kind of requirements lies beyond FPT_TST.1 defined in Common Criteria,
Part 2.
Family behaviour
The family defines the requirements for the self-testing of the TSF with respect to some expected correct
operation. Examples are interfaces to enforcement functions, and sample arithmetical operations on
critical parts of the TOE. These tests can be carried out at start-up, periodically, at the request of the
authorised user, or when other conditions are met. The actions to be taken by the TOE as the result of
self-testing are defined in other families.
The requirements of this family are also needed to detect the corruption of TSF executable code (i.e. TSF
software) and TSF data by various failures that do not necessarily stop the TOE's operation (which would
be handled by other families). These checks must be performed because these failures may not
necessarily be prevented. Such failures can occur either because of unforeseen failure modes or
associated oversights in the design of hardware, firmware, or software, or because of malicious
corruption of the TSF due to inadequate logical and/or physical protection.
Component levelling
FPT_TST.1 TSF testing provides the ability to test the TSF's correct operation. These tests may be
performed at start-up, periodically, at the request of the authorised user, or when other conditions are
met. It also provides the ability to verify the integrity of TSF data and executable code.
FPT_TST.2 TSF self-testing requires self-testing capabilities of the TSF correct operation. These
tests must be performed at start-up. Conditional and on-demand by a user self-testing may be required.
Particular TSF behaviour during self-testing and TSF-actions after self-testing is required.
Management: FPT_TST.2
There are no management activities foreseen.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 42 of 111
Audit: FPT_TST.2
The following actions should be auditable if FAU_GEN Security audit data generation is included in the
PP/ST:
a) Basic: Execution of the TSF self-tests and the results of the tests.
FPT_TST.2 TSF self-testing
Hierarchical to: No other components.
Dependencies: FPT_FLS.1 Failure with preservation of secure state.
FPT_TST.2.1 The TSF shall perform self-testing at power-up to verify the correctness of [assignment:
list of cryptographic algorithms] and of [assignment: list of critical TSF], and to verify the integrity of the
TSF-software/firmware.
FPT_TST.2.2 The TSF shall perform self-testing at the conditions [assignment: list of conditions] to
verify the correctness of [assignment: list of critical cryptographic algorithms].
FPT_TST.2.3 The TSF shall perform self-testing at the conditions [assignment: list of conditions] to
verify the correctness of [assignment: list of critical TSF], and to verify the integrity of [assignment: list of
TSF data].
FPT_TST.2.4 The TSF shall perform self-testing at the conditions [assignment: list of conditions] to
verify the integrity of [assignment: list of TSF-objects].
FPT_TST.2.5 The TSF shall provide [assignment: list of users] with the capability to invoke the
following self-tests [assignment: list of self-tests].
FPT_TST.2.6 During [assignment: list of self-tests] the TSF shall [assignment: list of actions to be
performed].
FPT_TST.2.7 After completion of self-testing the TSF shall [assignment: list of actions to be performed].
FPT_TST.2.8 If the self-testing result is fail the TSF shall [assignment: list of actions to be performed].
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 43 of 111
6 Security Requirements
This chapter gives the security functional requirements (SFRs) and the security assurance requirements
(SARs) for the TOE. These are taken directly from [Cryptographic Modules, Security Level “Enhanced
Basic”] without modification except FPT_PHP.1 and FPT_PHP.3 have been removed which corresponds
to the removal of O.Physical_Protect as a result of the addition of OE.Env and independently, FDP_UCT
and FDP_UIT have been removed as surplus requirements in light of the absence of the Red-Black SFP
and protection to be provided by the environment under OE.Client_Management.
Security functional requirements components given in section 6.1 are drawn from the Common Criteria
(ISO 15408), Version 3.1, Part 2 [2]. In addition, extended security functional requirements are also used;
these are defined in Section 5. Operations for assignment, selection and refinement have been made as
needed.
TOE Security Assurance Requirements, section 6.2, are drawn from the security assurance components
from Common Criteria, Version 3.1, Part 3 [3].
The conventions used which are carried through from [Cryptographic Modules, Security Level “Enhanced
Basic”] are also used in this Security Target to indicate operations that have been performed on the CC
functional components:
The refinement operation is used to add detail to a requirement, and thus further restricts a requirement.
Refinement of security requirements is (i) denoted by the word “refinement” in bold text and the
added/changed words are in bold text, or (ii) directly included in the requirement text as bold text. In
cases where words from a CC requirement were deleted, a separate attachment indicates the words that
were removed.
The selection operation is used to select one or more options provided by the CC in stating a
requirement. Selections that have been made by the PP authors are denoted as italic text and the original
text of the component is given by a footnote. Selections to be filled in by the ST author appear in square
brackets with an indication that a selection is to be made, [selection:], and are italicized.
The assignment operation is used to assign a specific value to an unspecified parameter, such as the
length of a password. Assignments that have been made by the PP authors are denoted by showing as
italic text and the original text of the component is given by a footnote. Assignments to be filled in by the
ST author appear in square brackets with an indication that an assignment is to be made [assignment:],
and are italicized.
The iteration operation is used when a component is repeated with varying operations. Iteration is
denoted by showing a slash “/” and the iteration indicator after the component identifier.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 44 of 111
6.1 TOE Security Functional Requirements
6.1.1 Cryptographic operation and key management
6.1.1.1 FCS_CKM.1 Cryptographic key generation
FCS_CKM.1.1 The TSF shall generate cryptographic keys in accordance with the14
specified
cryptographic key generation algorithms15
[assignment: listed below] and specified cryptographic key
sizes [assignment: specified for each algorithm below] that meets the following: [assignment: see list
below
(1) RSA 1024, 2048, 3072 and 4096 bits key pairs in accordance with FIPS PUB 186-3 and
ANSI X9.31.
(2) TDES 112, 168 bits (security strength) keys in accordance with NIST SP 800-67.
(3) AES 128, 192, 256 bits keys in accordance with FIPS PUB 197.
(4) DSA 1024, 2048 and 3072 bits key pairs in accordance with FIPS PUB 186-3.
(5) Elliptic Curve key pairs P-192, P-224, P-256, P-384, P-521, K-163, K-233, K-283, K-409, K-
571, B-163, B-233, B-283, B-409, B-571 in accordance with FIPS PUB 186-3 and ANSI
X9.62.
(6) EC Diffie-Hellman Key Agreement curves P-192, P-224, P-256, P-384, P-521, K-163, K-
233, K-283, K-409, K-571, B-163, B-233, B-283, B-409 and B-571 in accordance with NIST
SP-800-56A.]
6.1.1.2 FCS_CKM.2/Private_Key_Import Cryptographic key distribution
FCS_CKM.2.1/ Private_Key_Import The TSF shall distribute private key16
in accordance with a
specified cryptographic key distribution method key entry17
that meets the following: [assignment: see list
below:
(1) Encrypted Private Key Info Syntax format from PKCS #8: Private-Key Information Syntax
Standard using TDES (112, 168 bit keys) in CBC mode
(2) Encrypted Private Key Info Syntax format from PKCS #8: Private-Key Information Syntax
Standard using AES (128, 192 and 256 bit keys) in CBC mode].
Refinement:
The key entry shall be performed using electronic methods.
All secret key (symmetric cryptographic algorithm) or private keys that are imported into the TOE
in encrypted form shall be encrypted using an Endorsed cryptographic algorithm.
Application note: Implemented using the key wrapping protocol for symmetric keys.
Application note: SFR renamed from FCS_CKM.2/Import for clarity and consistency.
14
a
15
algorithm
16
cryptographic keys
17
[assignment: cryptographic key distribution method]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 45 of 111
6.1.1.3 FCS_CKM.2/Secret_Symmetric_Key_Import Cryptographic key
distribution
FCS_CKM.2.1/ Secret_Symmetric_Key_Import The TSF shall distribute secret key (symmetric
cryptographic algorithm)18
in accordance with a specified cryptographic key distribution method key
entry19
that meets the following: [assignment: see list below:
(1) RSAES-OAEP from PKCS #1 v2.1 with RSA Modulus sizes of 1024-4096 bits;
(2) TDES from NIST SP-800-67 in CBC mode with 112 and 168 bit keys;
(3) TDES from NIST SP-800-67 in ECB mode with 112 and 168 bit keys;
(4) AES from FIPS PUB 197 in CBC mode with 128, 192 and 256 bit keys;
(5) AES from FIPS PUB 197 in ECB mode with 128, 192 and 256 bit keys].
Refinement:
The key entry shall be performed using electronic methods.
All secret or private keys that are imported into the TOE in encrypted form shall be encrypted
using an Endorsed cryptographic algorithm.
Application note: Implemented using the key wrapping protocol for asymmetric keys.
Application note: SFR renamed from FCS_CKM.2/Import for clarity and consistency.
6.1.1.4 FCS_CKM.2/Cloning_Import Cryptographic key distribution
FCS_CKM.2.1/Cloning_Import The TSF shall distribute cryptographic keys in accordance with a
specified cryptographic key distribution method key entry20
that meets the following: [assignment: Safenet
Cloning Protocol using AES-256 in CBC mode for confidentiality and SHA-256 for Integrity].
Refinement:
The key entry shall be performed using electronic methods.
All secret or private keys that are imported into the TOE in encrypted form shall be encrypted and
integrity protected using an Endorsed cryptographic algorithm.
Application Note: Implemented using the Luna Cloning Protocol.
Application Note: SFR renamed from FCS_CKM.2/Import for clarity and consistency.
6.1.1.5 FCS_CKM.2/Private_Key_Export Cryptographic key distribution
FCS_CKM.2.1/Private_Key_Export The TSF shall distribute private key 21
in accordance with a
specified cryptographic key distribution method key export22
that meets the following: [assignment: see
list below:
18
cryptographic keys
19
[assignment: cryptographic key distribution method]
20
[assignment: cryptographic key distribution method]
21
cryptographic keys
22
[assignment: cryptographic key distribution method]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 46 of 111
(1) Encrypted Private Key Info Syntax format from PKCS #8: Private-Key Information Syntax
Standard using TDES (112, 168 bit keys) in CBC mode;
(2) Encrypted Private Key Info Syntax format from PKCS #8: Private-Key Information Syntax
Standard using AES (128, 192 and 256 bit keys) in CBC mode;]
Refinement:
The key export shall be performed using electronic key export methods.
All secret or private keys exported in encrypted form by the TOE shall be encrypted using an
Endorsed cryptographic algorithm.
Application Note: Implemented using the key wrapping protocol for symmetric keys.
Application note: SFR renamed from FCS_CKM.2/Export for clarity and consistency.
6.1.1.6 FCS_CKM.2/Secret_Symmetric_Key_Export Cryptographic key
distribution
FCS_CKM.2.1/ Secret_Symmetric_Key_Export The TSF shall distribute secret key (symmetric
cryptographic algorithm)23
in accordance with a specified cryptographic key distribution method key
export24
that meets the following: [assignment: see list below:
(1) RSAES-OAEP from PKCS #1 v2.1 with RSA Modulus sizes of 1024-4096 bits;
(2) TDES from NIST SP-800-67 in CBC mode with 112 and 168 bit keys;
(3) TDES from NIST SP-800-67 in ECB mode with 112 and 168 bit keys;
(4) AES from FIPS PUB 197 in CBC mode with 128, 192 and 256 bit keys;
(5) AES from FIPS PUB 197 in ECB mode with 128, 192 and 256 bit keys].
Refinement:
The key export shall be performed using electronic key export methods.
All secret or private keys exported in encrypted form by the TOE shall be encrypted using an
Endorsed cryptographic algorithm.
Application Note: Implemented using the key wrapping protocol for asymmetric keys.
Application note: SFR renamed from FCS_CKM.2/Export for clarity and consistency.
6.1.1.7 FCS_CKM.2/Cloning_Export Cryptographic key distribution
FCS_CKM.2.1/Cloning_Export The TSF shall distribute cryptographic keys in accordance with a
specified cryptographic key distribution method key export25
that meets the following: [assignment:
Safenet Cloning Protocol using AES-256 in CBC mode for confidentiality and SHA-256 for Integrity].
Refinement:
The key export shall be performed using electronic key export methods.
23
cryptographic keys
24
[assignment: cryptographic key distribution method]
25
[assignment: cryptographic key distribution method]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 47 of 111
All secret or private keys exported in encrypted form by the TOE shall be encrypted and integrity
protected using an Endorsed cryptographic algorithm. All public keys exported for electronic key
entry method shall be integrity protected using an Endorsed cryptographic algorithm.
Application Note: Implemented by means of the Luna Cloning Protocol.
Application Note: SFR renamed from FCS_CKM.2/Export for clarity and consistency.
6.1.1.8 FCS_CKM.4 Cryptographic key destruction
FCS_CKM.4.1 The TSF shall destroy cryptographic keys in accordance with a specified cryptographic
key destruction method [assignment: overwrite] that meets the following: [assignment: overwrite of stored
key values in memory].
6.1.1.9 FTP_ITC.1/Cloning Inter-TSF trusted channel
FTP_ITC.1.1/Cloning The TSF shall provide a communication channel between itself and another
trusted IT product that is logically distinct from other communication channels and provides assured
identification of its end points and protection of the channel data from modification or disclosure.
FTP_ITC.1.2/Cloning The TSF shall permit [selection: another trusted IT product] to initiate
communication via the trusted channel.
FTP_ITC.1.3/Cloning The TSF shall initiate communication via the trusted channel for electronic key
distribution according to FCS_CKM.2/Cloning_Import and FCS_CKM.2/Cloning_Export26
.
6.1.1.10 FCS_COP.1/Sign Cryptographic operation - Digital signature
FCS_COP.1.1/Sign The TSF shall perform [assignment: digital signature generation and verification]
in accordance with a specified cryptographic algorithm [assignment: from the list below] and
cryptographic key sizes [assignment: as specified for each algorithm listed below] that meet the following:
[assignment:
(1) RSA 1024-4096 bits with SHA-1, SHA-224, SHA-256, SHA-384, SHA-512 (RSASSA-PSS and
RSASSA-PKCS1-v1_5 from PKCS #1),
(2) RSA 1024 -4096 bits with SHA-1, SHA-224, SHA-256, SHA-384, SHA 512 (FIPS PUB 186-3 and
ANSI X9.31),
(3) DSA 1024, 2048 and 3072 bits with SHA-1, SHA-256, SHA-384, SHA 512 (FIPS PUB 186-3),
(4) ECDSA curves P-192 P-224 P-256 P-384 P-521 K-163 K-233 K-283 K-409 K-571 B-163 B-233
B-283 B-409 B-571 with SHA-1, SHA-256, SHA-384, SHA 512 (FIPS PUB 186-3)].
6.1.1.11 FCS_COP.1/DigestCryptographic operation - Message digest
FCS_COP.1.1/Digest The TSF shall perform [assignment: message digest] in accordance with a
specified cryptographic algorithm [assignment: from the list below] and cryptographic key sizes
[assignment: as specified for each hash function below] that meet the following: [assignment:
(1) SHA-1 / 160 bits / FIPS PUB 180-4
26
[assignment: list of functions for which a trusted channel is required]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 48 of 111
(2) SHA-224 / 224 bits / FIPS PUB 180-4,
(3) SHA-256 / 256 bits / FIPS PUB 180-4,
(4) SHA-384 / 384 bits / FIPS PUB 180-4,
(5) SHA-512 / 512 bits / FIPS PUB 180-4].
6.1.1.12 FCS_COP.1/RSA_Enc_Dec Cryptographic operation - RSA
Encrypt/Decrypt
FCS_COP.1.1/RSA_Enc_Dec The TSF shall perform [assignment: asymmetric encryption and
decryption] in accordance with a specified cryptographic algorithm [assignment: RSA] and cryptographic
key sizes [assignment: 1024 – 4096 bits] that meet the following: [assignment: RSAES-OAEP from PKCS
#1 v2.1].
6.1.1.13 FCS_COP.1/TDES_Enc_Dec Cryptographic operation - TDES
Encrypt/Decrypt
FCS_COP.1.1/TDES_Enc_Dec The TSF shall perform [assignment: symmetric encryption and
decryption] in accordance with a specified cryptographic algorithm [assignment: Triple DES (ECB, CBC
and CFB-8 mode)] and cryptographic key sizes [assignment: 112 and 168 bits] that meet the following:
[assignment: NIST SP 800-67].
6.1.1.14 FCS_COP.1/AES_Enc_Dec Cryptographic operation - AES
Encrypt/Decrypt
FCS_COP.1.1/AES_Enc_Dec The TSF shall perform [assignment: symmetric encryption and
decryption] in accordance with a specified cryptographic algorithm [assignment: AES (ECB, CBC and
GCM mode)] and cryptographic key sizes [assignment: 128, 192 and 256 bits] that meet the following:
[assignment: FIPS PUB 197].
6.1.1.15 FCS_COP.1/Key_Derive Cryptographic operation – Key Derivation
FCS_COP.1.1/Key_Derive The TSF shall perform [assignment: key derivation] in accordance with a
specified cryptographic algorithm [assignment: Counter Mode KDF with AES or TDES)] and cryptographic
key sizes [assignment: 112 -256 bits] that meet the following: [assignment: Counter Mode KDF from
FIPS SP 800-108].
6.1.1.16 FCS_COP.1/MAC Cryptographic operation – MAC
FCS_COP.1.1/MAC The TSF shall perform [assignment: Message Authentication Codes] in accordance
with a specified cryptographic algorithm [assignment: from the list below] and cryptographic key sizes
[assignment: as specified for each function below] that meet the following: [assignment:
(1) HMAC with SHA-1, SHA-224, SHA-256, SHA-384, SHA-512 (FIPS PUB 198-1),
(2) TDES MAC with 168 bit keys (FIPS PUB 113),
(3) AES CMAC with 128, 192 and 256 bit keys (NIST SP 800-38B),
(4) TDES CMAC with 112 and 168 bit keys (NIST SP 800-38B),
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 49 of 111
(5) AES GMAC with 128, 192 and 256 bit keys (NIST SP 800-38D].
6.1.1.17 FCS_RNG.1 Random number generation
FCS_RNG.1.1 The TSF shall provide a [selection: deterministic] random number generator that
implements [assignment: a Deterministic Random Bit Generator (CTR_DRBG with AES-256) conformant
to NIST SP 800-90A, seeded by an internal Hardware Non-deterministic Random Bit Generator].
FCS_RNG.1.2 The TSF shall provide random numbers that meet [assignment: independent bits with
Shannon entropy of greater than 7.9999 bits per octet based on a 224
bit data-set].
6.1.2 User Identification and authentication
6.1.2.1 FIA_ATD.1 User attribute definition
FIA_ATD.1.1 The TSF shall maintain the following list of security attributes belonging to individual
users:
(1) User identity,
(2) Role,
(3) Reference authentication data,
(4) [assignment: User failed login count, User “locked” flag].
6.1.2.2 FIA_UID.1 Timing of identification
FIA_UID.1.1 The TSF shall allow
(1) Self-test according to FPT_TST.2,
(2) [assignment: none27
],
(3) [assignment:
a. query HSM status, authenticated identity, configuration and licenses,
b. query container configuration,
c. query container object identify (from known OUID or object handle),
d. session management functions (i.e. open, close, close all, clean access),
e. MTK re-generation and unlock,
f. HSM deactivation,
g. PED configuration and communication requests;
h. Host-to-HSM communication channel tests;
i. query log status and submit external log messages for addition to secure audit log,
27
[assignment: list of cryptographic operations with public keys]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 50 of 111
j. Host-to-Luna PCI-E external USB interface communication tunneling] 28
on behalf of the user to be performed before the user is identified.
FIA_UID.1.2 The TSF shall require each user to be successfully identified before allowing any other
TSF-mediated actions on behalf of that user.
Application Note: MTK re-generation is a factory operation performed during re-manufacture of an HSM
where an existing MTK is zeroised and re-generated.
6.1.2.3 FIA_UAU.1 Timing of authentication
FIA_UAU.1.1 The TSF shall allow
(1) Self-test according to FPT_TST.2,
(2) [assignment: none] 29
,
(3) Identification according to FIA_UID.1,
(4) Selection of [selection: a role],
(5) [assignment:
a. query HSM status, authenticated identity, configuration and licenses,
b. query container configuration,
c. query container object identify (from known OUID or object handle),
d. session management functions (i.e. open, close, close all, clean access),
e. MTK re-generation and unlock,
f. HSM deactivation,
g. PED configuration and communication requests;
h. Host-to-HSM communication channel tests;
i. query secure audit log status and submit external log messages for storage,
j. Host-to-Luna PCI-E external USB interface communication tunneling,
k. request login against a role or login to a role on an HA paired container,
l. create, modify, destroy and get attributes of public partition objects,
m. request entropy,
n. session management function (close, get session info),
o. request cryptographic digest of data,
p. request a challenge for challenge-response authentication secondary authentication
mechanism,
q. zeroize the HSM.] 30
28
[assignment: list of TSF mediated actions]
29
[assignment: list of cryptographic operations with public keys]
30
[assignment: list of other TSF mediated actions]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 51 of 111
on behalf of the user to be performed before the user is authenticated.
FIA_UAU.1.2 The TSF shall require each user to be successfully authenticated before allowing
any other TSF-mediated actions on behalf of that user.
6.1.2.4 FIA_UAU.6 Re-authenticating
FIA_UAU.6.1 The TSF shall re-authenticate the user under the conditions:
(1) Changing to a role not selected for the current valid authentication session,
(2) power on or reset,
(3) [assignment: No other conditions] 31
.
6.1.2.5 FIA_UAU.7 Protected authentication feedback
FIA_UAU.7.1 The TSF shall provide only [assignment: status messages to trusted PIN entry device] to
the user while the authentication is in progress.
Application Note: Status messages alert the trusted PIN Entry device that the TOE is ready to receive
authentication data. The trusted PIN entry device is responsible for the content of the status message
data and feedback to the user.
6.1.2.6 FIA_USB.1 User-subject binding
FIA_USB.1.1 The TSF shall associate the following user security attributes with subjects acting on the
behalf of that user:
(1) User identity,
(2) Role,
(3) [assignment: Challenge Secret]
FIA_USB.1.2 The TSF shall enforce the following rules on the initial association of user security
attributes with subjects acting on the behalf of users: the initial role of the user is Unidentified User.
Application note: Unidentified User is established by checking the following parameters:
• User ID is Public (unidentified)
• User Challenge Secret is Nil.
• User role is Nil.
FIA_USB.1.3 The TSF shall enforce the following rules governing changes to the user security
attributes associated with subjects acting on the behalf of users:
(1) the subject attribute Role shall be changed from Unidentified user to Unauthenticated user after
successful identification;
31
[assignment: list of other conditions under which re-authentication is required]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 52 of 111
(2) after successful authentication the subject attribute Role shall be changed from
Unauthenticated User to a role that the user has selected for the authentication session if the
user is authorised for this role;
(3) after successful re-authentication of the user the subject attribute Role shall be changed to a
role that the user has selected for the authentication session if the user is authorised for this
role,
(4) [assignment: no additional rules32
]
6.1.2.7 FIA_AFL.1/CO Authentication failure handling
FIA_AFL.1.1/CO The TSF shall detect when [selection: [assignment: an SO configurable33
positive integer within the range of three (3) to ten (10)] unsuccessful authentication attempts occur
related to [assignment: Crypto Officer authentication].
FIA_AFL.1.2/CO When the defined number of unsuccessful authentication attempts has been
[selection: met], the TSF shall [assignment: block the identity for authentication].
Application Note: The TOE blocks the identity for authentication by terminating the session establishment
and, according to the SO configurable policy by:
(1) removing the Crypto Officer and clearing the Crypto Officers memory space and permanent
storage, or
(2) disabling the Crypto Officer account by setting the locked flag in the Crypto Officer’s attributes
(FIA_ATD.1).
6.1.2.8 FIA_AFL.1/SO Authentication failure handling
FIA_AFL.1.1/SO The TSF shall detect when [selection: [assignment: three (3)]] unsuccessful
authentication attempts occur related to [assignment: Security Officer authentication].
FIA_AFL.1.2/SO When the defined number of unsuccessful authentication attempts has been
[selection: met], the TSF shall [assignment: change the state of the TOE to require re-initialization].
6.1.2.9 FIA_AFL.1/User Authentication failure handling
FIA_AFL.1.1/User The TSF shall detect when [selection: [assignment: an SO configurable34
positive integer within the range of three (3) to ten (10)] unsuccessful authentication attempts occur
related to [assignment: User authentication].
FIA_AFL.1.2/User When the defined number of unsuccessful authentication attempts has been
[section: met], the TSF shall [assignment: block the identity for authentication].
Application Note: The TOE blocks the identity for authentication by terminating the session establishment
and disabling the User account by setting the User locked flag in the User’s attributes (FIA_ATD.1).
32
[assignment: additional rules for the changing of attributes]
33
administrator-configurable
34
administrator-configurable
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 53 of 111
6.1.3 Protection of user data
6.1.3.1 FDP_ACC.2/Key_Man Complete access control
FDP_ACC.2.1/Key_Man The TSF shall enforce the Key Management SFP35
on:
(1) all cryptographic keys, key components, CSP;
(2) all subjects acting on behalf of users36
.
and all operations among subjects and objects covered by the SFP.
FDP_ACC.2.2/Key_Man The TSF shall ensure that all operations between any subject controlled
by the TSF and any object controlled by the TSF are covered by an access control SFP.
6.1.3.2 FDP_ACF.1/Key_Man Security attribute based access control
FDP_ACF.1.1/Key_Man The TSF shall enforce the Key Management SFP37
to objects based on
the following:
(1) Subjects with security attributes: User identity the subject is bound to, Role of this user;
(2) Objects
a. Cryptographic keys with security attributes: Key identity, Key entity, Key type, Key usage
type, Key access control rules;
b. Key components with security attributes: Key component identity, Key entity, Key entry
method,
c. CSP with security attributes: CSP Identity, CSP usage type, CSP access control rules38
.
FDP_ACF.1.2/Key_Man The TSF shall enforce the following rules to determine if an operation among
controlled subjects and controlled objects is allowed:
(1) Subject in Crypto Officer role is allowed to import encrypted secret and private keys if the security
attribute Key access control rules of the key allows import;
(2) Subject in Crypto Officer role is allowed to import one key component of a key with the key entry
method assigned to the key component;
(3) Subject in Crypto Officer role is allowed to import CSP,
(4) Subject in Crypto Officer role is allowed to export encrypted secret or private keys if the security
attribute Key access control rules of the key allows export;
(5) Subject in Crypto Officer role is allowed to export one key component of a key with the key entry
method assigned to the key component;
(6) Subject in Crypto Officer role is allowed to export CSP if the security attribute CSP access control
rules of the CSP allows export;
35
[assignment: access control SFP]
36
[assignment: list of subjects and objects]
37
[assignment: access control SFP]
38
[assignment: list of subjects and objects controlled under the indicated SFP, and for each, the SFP-
relevant security attributes, or names groups of SFP-relevant security attributed]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 54 of 111
(7) Subject in Crypto Officer role is allowed to destruct cryptographic keys, cryptographic key
components and CSP.
(8) [assignment: None]39
.
FDP_ACF.1.3/Key_Man The TSF shall explicitly authorise access of subjects to objects based on the
following additional rules:
(1) Subjects in Maintenance role are allowed to import and destruct maintenance cryptographic keys,
key components and CSP;
(2) [assignment: no other rules]40
.
Application Note: The TOE does not support a maintenance role or the concept of maintenance
cryptographic keys, key components and CSP. This TOE Security functional requirement is retained for
consistency with Protection Profile – BSI-CC-PP-0078 only.
FDP_ACF.1.4/Key_Man The TSF shall explicitly deny access of subjects to objects based on the
following additional rules:
(1) Subject in Crypto Officer role is not allowed to import a key component if the same subject or
another subject with the same User identity already input a key component with a different Key
component identity and the same Key entity;
(2) Subject in Crypto Officer role is not allowed to export a key component if the same subject or
another subject with the same Identity of the user already export a key component with a different
Identity and the same Key entity;
(3) Subjects with other roles than Crypto Officer role are not allowed to input operational public root
key;
(4) Subjects with other roles than Crypto Officer role are not allowed to input permanent stored
operational secret keys, private keys, key components and CSP;
(5) No subject is allowed to import or export secret key or private keys in plaintext;
(6) No subject is allowed to use keys by operation other than identified in Key usage type and the
Key access control rules;
(7) [assignment: no other rules]41
.
6.1.3.3 FDP_ACC.2/Oper Complete access control
FDP_ACC.2.1/Oper The TSF shall enforce the Cryptographic Operation SFP42
on:
(1) operational cryptographic keys, CSP,
(2) plaintext data, ciphertext data, original data;
39
[assignment: rules governing access among controlled subjects and controlled objects using controlled
operations on controlled objects]
40
[assignment: rules, based on security attributes, that explicitly authorise access of subjects to objects]
41
[assignment: rules, based on security attributes, that explicitly deny access of subjects to objects]
42
[assignment: access control SFP].
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 55 of 111
(3) all subjects acting on behalf of users43
and all operations among subjects and objects covered by the SFP.
FDP_ACC.2.2/Oper The TSF shall ensure that all operations between any subject controlled by the TSF
and any object controlled by the TSF are covered by an access control SFP.
6.1.3.4 FDP_ACF.1/Oper Security attribute based access control
FDP_ACF.1.1/Oper The TSF shall enforce the Cryptographic Operation SFP44
to objects based on the
following:
(1) Subjects with security attributes: User Identity the subject is bound to, Role of this user;
(2) Objects
a. Operational cryptographic keys with security attributes: Key identity, Key entity, Key type,
Key usage type, Key access control rules;
b. Operational CSP with security attributes: CSP identity, CSP usage type, CSP access control
rules,
c. plaintext data, ciphertext data, original data.45
FDP_ACF.1.2/Oper The TSF shall enforce the following rules to determine if an operation among
controlled subjects and controlled objects is allowed46
:
(1) Subject in Crypto User47
role is allowed to perform cryptographic operation with public, private,
and secret keys in accordance with the security attributes of the used cryptographic keys and
CSP;
(2) [assignment: Subject in Crypto Officer or Crypto User role is allowed to perform cryptographic
operation in accordance with the security attributes of the used cryptographic keys and CSP]48
Application Note: The following rules has been removed from FDP_ACF.1.2/Oper in this Security Target
from the original PP: “Subject in Unauthenticated user role is allowed to perform cryptographic operation
with public keys in accordance with the security attributes of the used cryptographic keys and CSP”. No
support is provided in the TOE to allow this operation and hence it’s been removed as an assurance
claim.
FDP_ACF.1.3/Oper The TSF shall explicitly authorise access of subjects to objects based on the
following additional rules: [assignment: none].
FDP_ACF.1.4/Oper The TSF shall explicitly deny access of subjects to objects based on the
following additional rules:
43
[assignment: rules governing access among controlled subjects and controlled objects using controlled
operations on controlled objects]
44
[assignment: access control SFP].
45
[assignment: list of subjects and objects controlled under the indicated SFP, and for each, the SFP-
relevant security attributes, or named groups of SFP-relevant security attributes]
46
The Luna TAC policy contains additional security policy rules, governing access to and usage of keys
and other objects, enforced by the TSF.
47
End-User
48
[assignment: rules governing access among controlled subjects and controlled objects using controlled
operations on controlled objects]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 56 of 111
(1) No subject is allowed to use cryptographic keys by cryptographic operation other than
identified in the security attributes Key usage type and the Key access control rules;
(2) No subject is allowed to use CSP by cryptographic operation other than identified in the
security attributes CSP usage type and the CSP access control rules;
(3) [assignment: no other rules]49
.
6.1.3.5 FDP_ACC.2/Mode_Trans Complete access control
FDP_ACC.2.1/Mode_Trans The TSF shall enforce the Mode transition SFP50
on all subjects acting
on behalf of users and the mode variable51
and all operations among subjects and objects covered by
the SFP.
FDP_ACC.2.2/Mode_Trans The TSF shall ensure that all operations between any subject controlled
by the TSF and any object controlled by the TSF are covered by an access control SFP.
6.1.3.6 FDP_ACF.1/Mode_Trans Security attribute based access control
FDP_ACF.1.1/Mode_Trans The TSF shall enforce the Mode transition SFP52
to objects based on
the following: all subjects acting on behalf of users and the mode variable53
.
FDP_ACF.1.2/Mode_Trans The TSF shall enforce the following rules to determine if an operation
among controlled subjects and controlled objects is allowed:
(1) the subject in Crypto Officer role is allowed to change the mode variable to a Key Management
mode, Crypto User mode54
or a Self-test mode;
(2) the subject in Crypto User55
role is allowed to change the mode variable to Crypto User56
mode57
.
FDP_ACF.1.3/Mode_Trans The TSF shall explicitly authorise access of subjects to objects based on
the following additional rules:
(1) the TOE shall enter automatically an Error mode from any mode of operation except a Power-off
mode or a Maintenance mode, when failure listed in FPT_FLS.1 occur,
(2) [assignment: no other rules]58
.
FDP_ACF.1.4/Mode_Trans The TSF shall explicitly deny access of subjects to objects based on the
following additional rules:
49
[assignment: rules, based on security attributes, that explicitly deny access of subjects to objects]
50
[assignment: access control SFP]
51
[assignment: list of subjects and objects].
52
[assignment: access control SFP].
53
[assignment: list of subjects and objects controlled under the indicated SFP, and for each, the SFP-
relevant security attributes, or names groups of SFP-relevant security attributes]
54
Key/CSP entry mode, Crypto User mode
55
User
56
User
57
[assignment: rules governing access among controlled subjects and controlled objects using operations
on controlled objects]
58
[assignment: rules, based on security attributes, that explicitly authorise access of subjects to objects]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 57 of 111
(1) Subjects in other roles than the Crypto Officer are not allowed to change the mode variable to a
Crypto Officer mode or a Key Management mode59
;
(2) [assignment: no other rules]60
Application note: The TOE does not provide any maintenance functionality and the Maintenance modes,
therefore, do not exist and the Maintenance Personnel Role is superfluous (cf. to FMT_SMR.2). In this
case the rules (2) and (3) in FDP_ACF.1.2/Mode_Trans, (1) in FDP_ACF.1.2/Mode_Trans and (2) in
FDP_ACF.1.4/Mode_Trans have been removed from this ST but were present in [Cryptographic Modules,
Security Level “Enhanced Basic”] as they do not apply to the TOE.
6.1.3.7 FDP_ITC.2 Import of user data with security attributes
FDP_ITC.2.1 The TSF shall enforce the Key Management SFP61
when importing user data,
controlled under the SFP, from outside of the TOE.
FDP_ITC.2.2 The TSF shall use the security attributes associated with the imported user data.
FDP_ITC.2.3 The TSF shall ensure that the protocol used provides for the unambiguous association
between the security attributes and the user data received.
FDP_ITC.2.4 The TSF shall ensure that interpretation of the security attributes of the imported user
data is as intended by the source of the user data.
FDP_ITC.2.5 The TSF shall enforce the following rules when importing user data controlled under the
SFP from outside the TOE
(1) keys shall be imported with the security attributes Key identity, Key entity, Key type, Key usage
type;
(2) key components shall be imported with the security attributes Identity of the Key, Key entity,
Key entry method;
(3) CSP shall be imported with security attributes Identity of the CSP and CSP usage type;
(4) all secret and private keys imported into the TOE shall be encrypted or entered using split
knowledge procedures using an Endorsed algorithm62
.
Application Note: All secret and private keys entered into the TOE and used by an Endorsed function
shall be imported in encrypted form (cf. FCS_CKM.2.1/Private_Key_Import and FCS_CKM.2.1/
Secret_Symmetric_Key_Import, FCS_CKM.2.1/Cloning_Import63
).
Application Note: The TOE does not support key import using split knowledge procedures.
6.1.3.8 FDP_ETC.2 Export of user data with security attributes
59
Key/CSP entry mode
60
[assignment: rules, based on security attributes, that explicitly deny access of subjects to objects]
61
[assignment: access control SFP(s) and/or information flow control SFP(s)]
62
[assignment: additional importation control rules]
63
FCS_CKM.2.1/Import
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 58 of 111
FDP_ETC.2.1 The TSF shall enforce the Key Management SFP64
when exporting user data,
controlled under the SFP(s), outside of the TOE.
FDP_ETC.2.2 The TSF shall export the user data with the user data's associated security
attributes.
FDP_ETC.2.3 The TSF shall ensure that the security attributes, when exported outside the TOE,
are unambiguously associated with the exported user data.
FDP_ETC.2.4 The TSF shall enforce the following rules when user data is exported from the TOE:
(1) keys shall be exported with the security attributes Key identity, Key entity, Key type, Key usage
type;
(2) secret and private keys exported in encrypted form shall be exported with additional security
attribute: Identity of the key encryption key under which they are encrypted;
(3) key components shall be exported with the security attributes Identity of the Key component, Key
entity, Key entry method;
(4) CSP shall be exported with security attributes Identity of the CSP and CSP usage type;
(5) all secret and private keys exported from the TOE shall be encrypted or protected by split-
knowledge procedure using an Endorsed algorithm65
.
Application Note: All secret and private keys exported from the TOE shall be exported in encrypted form
(cf. FCS_CKM.2.1/Private_Key_Export and FCS_CKM.2.1/ Secret_Symmetric_Key_Export,
FCS_CKM.2.1/Cloning_Export66
).
Application Note: The TOE does not support key export using split knowledge procedures.
6.1.3.9 FDP_RIP.2 Full residual information protection
FDP_RIP.2.1 The TSF shall ensure that any previous information content of a resource is made
unavailable upon the [selection: allocation of the resource to] all objects.
6.1.4 Management of TSF and protection of TSF data
6.1.4.1 FMT_SMF.1 Specification of Management Functions
FMT_SMF.1.1 The TSF shall be capable of performing the following management functions:
(1) management of security functions behaviour (FMT_MOF.1/SO67
),
(2) management of Reference Authentication Data (FMT_MTD.1/Admin, FMT_MTD.1/User,
64
[assignment: access control SFP(s) and/or information flow control SFP(s)]
65
[assignment: additional exportation control rules]
66
FCS_CKM.2.1/Import
67
FMT_MOF.1/CO
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 59 of 111
(3) management of security attributes of cryptographic keys, cryptographic key components and CSP
(FMT_MSA.1/Key_Man_1, FMT_MSA.1/Key_Man_2, FMT_MSA.2, FMT_MSA.3).
(4) [assignment: no other functions]68
.
6.1.4.2 FMT_SMR.2 Restrictions on security roles
FMT_SMR.2.1 The TSF shall maintain the roles: Security Officer69
, Crypto Officer, Crypto User70
,
Unidentified User, Unauthenticated User, [assignment: no other roles]71
.
FMT_SMR.2.2 The TSF shall be able to associate users with roles.
FMT_SMR.2.3 The TSF shall ensure that the conditions
(1) Any user identity assigned to the Security Officer72
role must not simultaneously be assigned to
the Crypto User73
role or the Crypto Officer role,
(2) Any user identity assigned to the Crypto Officer role must not simultaneously be assigned to the
Crypto User role or the Security Officer74
role.
(3) [assignment: no other conditions]75
.
are satisfied.
6.1.4.3 FMT_MOF.1/CO Management of security functions behaviour
FMT_MOF.1.1/CO The TSF shall restrict the ability to [selection: see individual items from
assigned list]76
the functions [assignment:
(1) Activate partition
(2) Enable the Crypto User role]
to Crypto Officer]77
.
Application Note: The Crypto Officer can only perform the aforementioned functions on partitions
specifically assigned to them by the Security Officer (SO).
6.1.4.4 FMT_MOF.1/SO Management of security functions behaviour
FMT_MOF.1.1/SO The TSF shall restrict the ability to [selection: see individual items from assigned
list]78
the functions [assignment:
68
[assignment: list of management functions to be provided by the TSF].
69
Administrator
70
End-User
71
[assignment: authorised identified roles]
72
Administrator
73
End-User
74
Administrator
75
[assignment: conditions for the different roles]
76
[selection: determine the behaviour of, disable, enable, modify the behaviour of]
77
[assignment: the authorised identified roles]
78
[selection: determine the behaviour of, disable, enable, modify the behaviour of]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 60 of 111
HSM Level
(1) HSM Cloning – SO may enable and disable / assign cloning domain)
(2) Remote Authentication – SO may enable and disable.
(3) Network Replication – SO may enable and disable.
(4) Force change of User authentication data – SO may enable and disable.
(5) Number of failed User login attempts allowed – SO may set.
Partition Level
(6) Partition reset – SO may enable and disable.
(7) Partition activation – SO may enable and disable.
(8) Partition auto-activation – SO may enable and disable.
(9) High Availability – SO may enable and disable.
(10) Multi-purpose keys – SO may enable and disable.
(11) Changing key attributes once a key has been created – SO may enable and disable.
(12) Operation without RSA blinding – SO may enable and disable.
(13) Signing operations with non-local keys – SO may enable and disable.
(14) Performing raw RSA operations – SO may enable and disable.
(15) Private key wrapping – SO may enable and disable
(16) Private key unwrapping – SO may enable and disable.
(17) Secret key wrapping – SO may enable and disable.
(18) Secret key unwrapping – SO may enable and disable.
(19) User key management capability – SO may enable and disable.
(20) Increment failed login attempt counter on failed challenge response validation – SO may enable
and disable.
(21) RSA signing without confirmation – SO may enable and disable.]
to Security Officer79:
Refinement:
If bypass mode is supported by the TOE then the TSF shall indicate through the status output
interface/port when the TOE is in bypass mode.
Application Note:
The TOE does not support bypass mode. The ST author has introduced an iteration of the SFR to better
describe management functions and role restrictions as implemented by the TOE. The module and
partitions must be configured by the Security Officer before a Crypto Officer can manage objects on the
designated partitions. The Crypto Officer can only create, use, destroy and backup/restore cryptographic
objects on the partition and cannot modify any configuration parameters other than its own password).
79
Crypto Officer
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 61 of 111
6.1.4.5 FMT_MTD.1/Admin Management of TSF data
FMT_MTD.1.1/Admin The TSF shall restrict the ability to create80
, clear and delete81
the Reference
Authentication Data82
of all authorised users to Security Officer83
.
6.1.4.6 FMT_MTD.1/User Management of TSF data
FMT_MTD.1.1/User The TSF shall restrict the ability to modify84
the Reference Authentication
Data85
to the corresponding authorised user86
.
6.1.4.7 FMT_MSA.1/Key_Man_1 Management of security attributes
FMT_MSA.1.1/Key_Man_1 The TSF shall enforce the Key Management SFP87
to restrict the ability
to query88
the security attributes Key identity, Key entity, Key type of the key, Key usage type, Key
access control rules, Key entry method89
to Crypto Officer or Crypto User90
.
6.1.4.8 FMT_MSA.1/Key_Man_2 Management of security attributes
FMT_MSA.1.1/Key_Man_2 The TSF shall enforce the Key Management SFP91
to restrict the ability
to modify92
the security attributes Key identity, Key entity, Key type, Key usage type, Key access
control rules93
to Crypto Officer94
.
6.1.4.9 FMT_MSA.2 Secure security attributes
FMT_MSA.2.1 The TSF shall ensure that only secure values are accepted for [assignment: Key
identity, Key entity, Key type, Key usage type, Key access control rules, CSP identity, CSP usage type,
CSP access control rules].
6.1.4.10 FMT_MSA.3 Static attribute initialisation
80
“create” denotes initial creation and setting a new value in case a user forgot/lost their authentication
data
81
[selection: change_default, query, modify, delete, clear, [assignment: other operations]]
82
[assignment: list of authentication data]
83
[assignment: the authorised identified roles]
84
[selection: change_default, query, modify, delete, clear, [assignment: other operations]]
85
[assignment: list of TSF data]
86
[assignment: the authorised identified roles]; here instead of role(s) the ability has been further
restricted to just the user, who the Reference Authentication Data belong to.
87
[assignment: access control SFP(s), information flow control SFP(s)].
88
[selection: change_default, query, modify, delete,[assignment: other operations]]
89
[assignment: list of security attributes]
90
[assignment: the authorised identified roles]
91
[assignment: access control SFP(s), information flow control SFP(s)].
92
[selection: change_default, query, modify, delete, clear, [assignment: other operations]]
93
[assignment: list of security attributes]
94
[assignment: the authorised identified roles]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 62 of 111
FMT_MSA.3.1 The TSF shall enforce the Key Management SFP, Cryptographic Operation SFP and
Mode Transition SFP95
to provide restrictive96
default values for security attributes that are used to
enforce the SFP.
FMT_MSA.3.2 The TSF shall allow the Crypto Officer97
to specify alternative initial values to override the
default values when an object or information is created.
6.1.5 TSF protection
6.1.5.1 FPT_TDC.1 Inter-TSF basic TSF data consistency
FPT_TDC.1.1 The TSF shall provide the capability to consistently interpret security attributes of
cryptographic keys, key components and CSPs98
when shared between the TSF and another trusted IT
product.
FPT_TDC.1.2 The TSF shall use the following rules:
(1) the TOE reports about conflicts between the Key identity of stored cryptographic keys and
cryptographic keys to be imported,
(2) the TOE does not change the security attributes Key identity, Key entity, Key type, Key
usage type of keys being imported or exported,
(3) the TOE reports about conflicts between the Key component identity of stored key
components and key components to be imported,
(4) the TOE does not change the security attributes Key component identity, Key entity, Key
entry method of key components being imported,
(5) the TOE reports about conflicts between the CSP identity of stored CSPs and CSPs to
be imported,
(6) the TOE does not change the security attributes CSP identity and CSP usage type of CSP
being imported or exported99
when interpreting the TSF data from another trusted IT product.
6.1.5.2 FPT_FLS.1 Failure with preservation of secure state
FPT_FLS.1.1 The TSF shall preserve a secure state when the following types of failures occur: self-test
fails100
.
Refinement:
When the TOE is in a secure error mode the TSF shall not perform any cryptographic operations
and all data output interfaces/ports shall be inhibited by the TSF.
95
[assignment: access control SFP, information flow control SFP]
96
[selection, choose one of: restrictive, permissive, assignment: other property]]
97
[assignment: the authorised identified roles]
98
[assignment: list of TSF data types]
99
[assignment: list of interpretation rules to be applied by the TSF]
100
[assignment: list of types of failures in the TSF]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 63 of 111
6.1.5.3 FPT_EMS.1 TOE Emanation
FPT_EMS.1.1 The TOE shall not emit [assignment: conducted emissions, radiated emissions]101
in
excess of [assignment: state of the art limits in order to have unintelligible emission]102
enabling access to
(1) authentication data,
(2) [assignment: no other TSF data]103
and
(1) “red data” containing confidential information,
(2) plaintext cryptographic secret or private key,
(3) cryptographic key components,
(4) confidential CSP,
(5) [assignment: no other user data]104
FPT_EMS.1.2 The TSF shall ensure [assignment: unauthenticated users, unidentified users]105
are
unable to use any interfaces or port106
to gain access to
(1) authentication data (except the authentication interface/port during authentication process of
the user),
(2) [assignment: no other TSF data]107
and
(1) “red data” containing confidential information (except the red data input and output
interface/port),
(2) plaintext cryptographic secret or private key,
(3) cryptographic key components (except key interface during import of the cryptographic key
component),
(4) confidential CSP (except key interface during import of the confidential CSP).
(5) [assignment: no other user data]108
.
6.1.5.4 FPT_TST.1 TSF testing
FPT_TST.1.1 The TSF shall run a suite of self-tests [selection: during initial start-up] to demonstrate the
correct operation of [selection: the TSF].
FPT_TST.1.2 The TSF shall provide authorised users with the capability to verify the integrity of
[selection: [assignment: key object attributes marked as private for partition stored objects]].
101
[assignment: types of emissions]
102
[assignment: specified limits]
103
[assignment: list of types of TSF data]
104
[assignment: list of types of user data]
105
[assignment: type of users]
106
[assignment: types of interfaces/ports]
107
[assignment: list of types of TSF data]
108
[assignment: list of types of user data]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 64 of 111
FPT_TST.1.3 The TSF shall provide authorised users with the capability to verify the integrity of all TSF
executable code stored in the TOE in form of software or firmware109
.
Application Note: Key object attributes marked private include: secret key values for symmetric keys and
private key parameters for all asymmetric key pairs.
6.1.5.5 FPT_TST.2 TSF self-testing
FPT_TST.2.1 The TSF shall perform self-testing at power-up to verify the correctness of [assignment:
CTR_DRBG, SHA-1, SHA-224, SHA-256, SHA-384, SHA-512, HMAC SHA-1, HMAC SHA-224, HMAC
SHA-256, HMAC SHA-384, HMAC SHA-512, RSA, DSA, ECDSA, TDES, AES, ECDH, Counter Mode
KDF and of [assignment: signature generation/verification, hash/keyed hash generation/verification,
encryption/decryption] and to verify the integrity of the TSF-software/firmware.
FPT_TST.2.2 The TSF shall perform self-testing at the conditions [assignment: RNG generation,
asymmetric key generation, loading of firmware] to verify the correctness of [assignment: CTR_DRBG,
RSA, DSA, ECDSA]
FPT_TST.2.3 The TSF shall perform self-testing at the conditions [assignment: power on] to verify the
correctness of [assignment: hashing functions], and to verify the integrity of [assignment: none].
FPT_TST.2.4 The TSF shall perform self-testing at the conditions [assignment: upon start up] to verify
the integrity of [assignment: firmware].
FPT_TST.2.5 The TSF shall provide [assignment: none] with the capability to invoke the following
self-tests:
[assignment: none ]
FPT_TST.2.6 During initial start-up self-test, power-up self-test, self-test at the request of the
authorised user [assignment: no other self-tests110
] the TSF shall inhibit all output via the data
interfaces/ports, and [assignment: prevent authentication to the TOE, any cryptographic operations]111
.
FPT_TST.2.7 After completion of self-testing the TSF shall output the results of the self-tests via the
status output interface/port, and [assignment: none]112
.
FPT_TST.2.8 If the self- testing result is fail the TSF shall enter a secure state (see
FPT_FLS.1) and output an error indicator via the status output interface/port, and [assignment: prevent
further cryptographic operations]113
.
Refinement:
A start-up test shall be performed when the TOE is powered up (after being powered off) or on
reset. A List of cryptographic algorithms shall include all Endorsed cryptographic algorithms
employed by the TOE. In order to verify the correctness of cryptographic algorithms self-testing
shall perform a known answer or a pair-wise consistency test. If the TOE module includes two
109
[selection: [assignment: parts of TSF],TSF]
110
[assignment: list of tests]
111
[assignment: list of actions to be performed]
112
[assignment: list of actions to be performed]
113
[assignment: list of actions to be performed]
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 65 of 111
independent implementations of the same cryptographic algorithm, then the outputs of two
implementations shall be compared.
In order to verify the integrity of the TSF-software/firmware a self-testing using an Endorsed error
detection code (EDC) or Endorsed authentication technique shall be applied.
The self-testing at the conditions shall cover, if applicable, the following conditions: i) when a
critical cryptographic algorithm or critical TSF operation is invoked, ii) pairwise consistency test
for newly generated asymmetric key-pairs, iii) on software/firmware load test, iv) on manual key
entry, and v) and on bypass events.
If the TOE provides generation of public/private key pairs, then the following pair-wise
consistency tests for public and private keys shall be performed. The consistency of the keys
shall be tested by the calculation and verification of a digital signature. If the digital signature
cannot be verified, the test shall fail.
If manual import of cryptographic keys or key components into the TOE is supported, then the
following manual key entry tests shall be performed. The cryptographic key or key components
shall have an Endorsed EDC applied, or shall be entered using duplicate entries. If the EDC
cannot be verified, or the duplicate entries do not match, the test shall fail.
If load of software or firmware into the TOE is supported, then the following software/firmware
load tests shall be performed. An Endorsed authentication technique shall be applied to all
validated software and firmware components when the components are externally loaded into the
TOE. The calculated result shall be compared with a previously generated result. If the calculated
result does not equal the previously generated result, the software/firmware integrity test shall
fail.
If the TOE implements a bypass capability where the services may be provided without
cryptographic processing, then the following bypass tests shall be performed to ensure that a
single point of failure of TOE components will not result in the unintentional output of plaintext.
The TSF shall test for the correct operation of the services providing cryptographic processing
when a switch takes place between an exclusive bypass service and an exclusive cryptographic
service. If the TOE can automatically alternate between a bypass service and a cryptographic
service, providing some services with cryptographic processing and some services without
cryptographic processing, then the TSF shall test for the correct operation of the services
providing cryptographic processing when the mechanism governing the switching procedure is
modified.
Application note: The TOE does not implement a bypass capability. A cryptographic algorithm shall have
an independent known-answer self-test or the known-answer self-test shall be included with the
associated cryptographic algorithm self-test. If the calculated output does not equal the known answer,
the known answer self-test shall fail. If a known-answer self-test is not appropriate because the output of
the cryptographic algorithms vary for a given set of inputs (e.g., a digital signature generated by means of
the Digital Signature Algorithm) it shall be tested using a known-answer test or using the inverse
cryptographic function (e.g., a digital signature is verified). Random number generators shall implement
statistical or other appropriate tests.
Application note: KAT from block ciphers AES and TDES as listed in FPT_TST.2.1 include test for all
supported key sizes and modes including their use to generate Message Authentication Codes i.e. TDES
MAC, TDES CMAC, AES CMAC and AES GMAC as listed under FCS_COP.1/MAC.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 66 of 111
6.2 TOE Security Assurance Requirements
In Table 6-1 the security assurance requirement components for the TOE are listed, they comprise EAL4
package augmented with ALC_FLR.2. The table also contains information, which of the chosen
components has been refined in in [Cryptographic Modules, Security Level “Enhanced Basic”]. The actual
refinements are then stated in the subchapters following the table. There only the refined security
assurance requirement elements are stated, any security assurance requirement elements taken
unchanged from CC Part 2 are not reproduced in this ST.
Assurance class Assurance component augmented? refined?
ADV:
Development
ADV_ARC.1
Security architecture description
No Yes
ADV_FSP.4
Complete functional specification
No Yes
ADV_IMP.1
Implementation representation of the TSF
No Yes
ADV_TDS.3
Basic modular design
No Yes
AGD: Guidance
documents
AGD_OPE.1
Operational user guidance
No Yes
AGD_PRE.1
Preparative procedures
No No
ALC:
Life-cycle support
ALC_CMC.4
Production support, acceptance procedures and
automation
No No
ALC_CMS.4
Problem tracking CM coverage
No No
ALC_FLR.2114
Flaw reporting procedures
Yes No
ALC_DEL.1
Delivery procedures
No No
ALC_DVS.1
Identification of security measures
No No
ALC_LCD.1
Developer defined life-cycle model
No No
ALC_TAT.1
Well-defined development tools
No No
ASE_CCL.1
Conformance claims
No No
ASE_ECD.1
Extended components definition
No No
114
Augmented by developer
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 67 of 111
Assurance class Assurance component augmented? refined?
ASE:
Security Target
evaluation
ASE_INT.1
ST introduction
No No
ASE_OBJ.2
Security objectives
No No
ASE_REQ.2
Derived security requirements
No No
ASE_SPD.1
Security problem definition
No No
ASE_TSS.1
TOE summary specification
No No
ATE: Tests
ATE_COV.2
Analysis of coverage
No No
ATE_DPT.1
Testing: basic design
No No
ATE_FUN.1
Functional testing
No No
ATE_IND.2
Independent testing - sample
No No
AVA: Vulnerability
assessment
AVA_VAN.4115
Methodical vulnerability analysis
Yes No
Table 6-1 – TOE Security Assurance Requirements (EAL4 augmented)
6.2.1 Refinement of ADV_ARC.1 (Security architecture description)
ADV_ARC.1.2C The security architecture description shall describe the security domains
maintained by the TSF consistently with the SFRs.
Refinement:
The security architecture description shall describe domain separation in terms of red-black
separation. This red-black separation shall describe that the TOE physically or logically
separates the interfaces for red data and black data. Further, the security architecture
description shall describe that the data output is disabled while performing (1) key generation
and manual key entry for the communication through this data port, (2) self-tests, (3) software
loading and key destruction.
The security architecture description shall describe domain separation in terms of a
semiformal Finite state model. The Finite state model of the TOE shall describe at least the
following modes:
(1) Power on/off modes
115
Augmented by developer.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 68 of 111
(2) Crypto officer modes
(3) Key Management modes116
(4) Crypto User modes117
(5) Self-test modes
(6) Error modes
(7) Bypass modes, if any
(8) Maintenance modes, if TOE provides maintenance functionality.
The Finite state model of the TOE shall describe the mode transition in terms of the input and
internal events and internal conditions that cause transitions from one mode to another and the
output events resulting from transitions from one mode to another.
The security architecture description shall describe that the data output interface is inhibited
when the TOE is in an error mode or in self- test mode.
If any bypass mode exists, the finite state model shall demonstrate that for all transitions into
any bypass mode, two independent internal actions are required for the transition into each
bypass mode to prevent the inadvertent bypass of plaintext data due to a single error (e.g., two
different software or hardware flags are set, one of which may be user- initiated).
If any bypass mode exists, the security architecture description shall demonstrate that functions
solely intended for bypass are not executable in any other mode of operation.
If any maintenance mode exists, the security architecture shall demonstrate that the mode
transition entering or exiting maintenance mode shall destruct all plaintext secret and private
keys and unprotected CSPs.
If any maintenance mode exists, the security architecture description shall demonstrate that
functions solely intended for maintenance are not executable in any other mode of operation.
Application note: The TOE does not support bypass modes. The term “finite state model” describes
finite set of states related to the modes of operation of the cryptographic module, and the state transition
in the model in terms of internal actions and conditions for changing the modes of operation of the
cryptographic module. The term “mode” for the states in the model is used according to the mode
addressed in FDP_ACC.2/Mode_Trans and FDP_ACF.1/Mode_Trans.
ADV_ARC.1.1EThe evaluator shall confirm that the information provided meets all requirements for
content and presentation of evidence.
Refinement:
The evaluator shall confirm that the security architecture for the red- black separation and
the finite state model are consistent with the TSF presentation in the functional specification,
TOE design, TSF implementation, guidance documentation, and evaluator tests.
6.2.2 Refinement of ADV_FSP.4 (Complete functional specification)
ADV_FSP.4.2C The functional specification shall describe the purpose and method of use for all TSFI.
116
updated from Key/CSP Entry Mode in Protection Profile – BSI-CC-PP-0078.
117
updated from user mode to reflect renaming of User to Crypto User as renamed throughout ST from
Protection Profile – BSI-CC-PP-0078.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 69 of 111
Refinement:
The functional specification shall identify the logical interfaces and physical ports as of the
following types (“input” and “output” are indicated from the perspective of the module):
• Data input interface/port: All data (except control data entered via the control input
interface) that is input to and processed by the cryptographic module (including
plaintext data, ciphertext data, cryptographic keys and CSPs, authentication data, and
status information from another entities),
• Data output interface/port: All data (except status data output via the status output
interface) that is output from the cryptographic module (including plaintext data,
ciphertext data, cryptographic keys and CSPs, authentication data, and control
information for another entity). All data output via the data output interface shall be
inhibited when the TOE is in an error mode or in start-up (power on) self-test mode,
• Control input interface/port: All input commands, signals, and control data (including
function calls and manual controls such as switches, buttons, and keyboards) used to
control the operation of a cryptographic module shall enter via the "control input"
interface.
• Status output interface/port: All output signals, indicators, and status data (including
return codes and physical indicators such as Light Emitting Diodes and displays) used
to indicate the status of a cryptographic module,
• Power interface/port: all external electrical power supply.
The functional specification shall describe the interface indicating the selection of an Endorsed
mode of operation and the interfaces for user data and TSF data as Endorsed modes of
operation.
ADV_FSP.4.3C The functional specification shall identify and describe all parameters associated with
each TSFI.
Refinement:
The functional specification shall also specify at minimum the normal voltage and temperature
operating ranges of the cryptographic module.
Application note: Please take note, the TOE shall separate logically the interfaces for red data, black
data, CSP (including plaintext cryptographic keys and cryptographic key components) and
administrative functions according to refinements of ADV_ARC.1. The functional specification shall
describe this logical separation according to the content and presentation elements of ADV_FSP.4.
6.2.3 Refinement of ADV_IMP.1 (Implementation representation of the
TSF)
ADV_IMP.1.1C The implementation representation shall define the TSF to a level of detail such that the
TSF can be generated without further design decisions.
Refinement:
The implementation representation for all software and firmware of the TOE shall be done in a
high-level language. The exceptional limited usage of low-level language (e.g., assembly
language or microcode) is allowed if essential to the performance of the TOE or when a high-
level language is not available. The implementation representation for all hardware components
of the TOE within the cryptographic module shall be done in a high-level specification language.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 70 of 111
6.2.4 Refinement of ADV_TDS.3 (Basic modular design)
ADV_TDS.3.3CThe design shall identify all subsystems of the TSF.
Refinement:
The design shall identify all subsystems with ports or interfaces used for the import or export
of secret keys, private keys or key components. These subsystems and all subsystem which
transfer or store any secret keys, private keys or key components shall be SFR-enforcing.
ADV_TDS.3.6CThe design shall provide a mapping from the subsystems of the TSF to the modules
of the TSF.
Refinement:
When doing so, the design shall identify all modules with ports or interfaces used for the import
or export of secret keys, private keys or key components. These modules and all modules
which transfer or store any secret keys, private keys or key components shall be SFR-enforcing.
6.2.5 Refinement of AGD_OPE.1 (Operational user guidance)
AGD_OPE.1.5C The operational user guidance shall identify all possible modes of operation of
the TOE (including operation following failure or operational error), their consequences and implications
for maintaining secure operation.
Refinement:
The operational user guidance shall describe how the user is able to determine when an
Endorsed mode of operation is selected and what the current status of the cryptographic
module is.
The operational user guidance shall describe how the user is able to initiate self-tests as
specified in FPT_TST.1 and how the user is informed about the result of these self-tests.
For some situations it is possible that some events cannot be automatically generated in the
audit records. This is usually due to the audit functions not being operational at the time these
events occur. Such events shall be documented in the operational user guidance, along with
recommendation on how manual auditing should be established to cover these events.
If the cryptographic module does not contain the reference authentication data required to
authenticate the user for the first time the module is accessed, then other authorised
methods (e.g., procedural controls or use of factory-set or default authentication data) shall
be described in the operational user guidance, how to control access to the module and
initialize the authentication mechanisms.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 71 of 111
6.2.6 ALC_FLR.2 Flaw reporting procedures118
Dependencies: No dependencies.
Objectives
In order for the developer to be able to act appropriately upon security flaw reports from TOE users, and
to know to whom to send corrective fixes, TOE users need to understand how to submit security flaw
reports to the developer. Flaw remediation guidance from the developer to the TOE user ensures that
TOE users are aware of this important information.
Developer action elements:
ALC_FLR.2.1D The developer shall provide flaw remediation procedures addressed to TOE
developers.
ALC_FLR.2.2D The developer shall establish a procedure for accepting and acting upon all
reports of security flaws and requests for corrections to those flaws.
ALC_FLR.2.3D The developer shall provide flaw remediation guidance addressed to TOE users.
Content and presentation of evidence elements:
ALC_FLR.2.1C The flaw remediation procedures documentation shall describe the procedures
used to track all reported security flaws in each release of the TOE.
ALC_FLR.2.2C The flaw remediation procedures shall require that a description of the nature
and effect of each security flaw be provided, as well as the status of finding a correction to that flaw.
ALC_FLR.2.3C The flaw remediation procedures shall require that corrective actions be identified
for each of the security flaws.
ALC_FLR.2.4C The flaw remediation procedures documentation shall describe the methods
used to provide flaw information, corrections and guidance on corrective actions to TOE users.
ALC_FLR.2.5C The flaw remediation procedures shall describe a means by which the developer
receives from TOE users reports and enquiries of suspected security flaws in the TOE.
ALC_FLR.2.6C The procedures for processing reported security flaws shall ensure that any
reported flaws are corrected and the correction issued to TOE users.
ALC_FLR.2.7C The procedures for processing reported security flaws shall provide safeguards
that any corrections to these security flaws do not introduce any new flaws.
ALC_FLR.2.8C The flaw remediation guidance shall describe a means by which TOE users
report to the developer any suspected security flaws in the TOE.
Evaluator action elements:
ALC_FLR.2.1E The evaluator shall confirm that the information provided meets all
requirements for content and presentation of evidence.
118
Augmented by developer
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 72 of 111
6.3 IT Security Requirements Rationale
Table 8-2 in shows the necessity of the Security Functional Requirements.
6.4 Appropriateness of Assurance Requirements
The assurance requirements chosen for the TOE, EAL 4 augmented by ALC_FLR.2 are considered to be
appropriate for the TOE in its assumed (and intended) operating environment for the following reasons:
(1) There are specific customer requirements for Certification Authority (CA) or Trust Service
Provider (TSP) components that meet the EAL 4 assurance requirements. The TOE, as part
of a larger CA or CSP system, must meet the EAL 4 requirements at a minimum, but does
not need to exceed them.
(2) Because the CA and TSP systems, for example, are critical infrastructure systems,
customers require a relatively high level of assurance that the components that make them
up have been developed and are maintained using sound engineering security practices.
(3) It is assumed that, for most of its life-cycle, the TOE will be contained within a larger secure
environment. It will, therefore, not be exposed to a threat environment that allows easy
access by highly capable outsiders. The main exception to this is when it is in transit when it
will be in a state that is either zeroised or where all of its sensitive data will be encrypted
using TDES encryption. Thus, the assumption of moderate attack potential for outsiders is
considered appropriate.
(4) Although the TOE will normally be contained within a secure environment, the potential value
of the key material stored within the TOE may be sufficient to result in insider attacks.
Because insiders would typically have access to the TOE or components of it and would be
likely to have detailed knowledge of the TOE and its configuration in their environment, they
are considered to have High attack potential.
(5) The augmentation of including ALC_FLR.2 is in response to existing company practice that
has been implemented to meet customer requirements for flaw reporting and fixing.
(6) The augmentation of AVA_VAN.4 is consistent with the level expected of HSM deployed in a
secured environment.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 73 of 111
7 TOE Summary Specification
7.1 Overview
The TOE is used primarily as a Hardware Security Module (HSM) for the protection of the private signing
keys at the Certification Authority (CA), or Trust Service Provider (TSP), within a Public Key Infrastructure
(PKI). As such, its primary functions are to securely generate and protect the private signing key used by
the CA or TSP when signing digital certificates.
The Luna® PCI-E cryptographic module provides storage capability for cryptographic material generated
by the module or generated by the host application as well as storage for non-cryptographic data
provided by the host application. Non-cryptographic data can be stored in the form of certificate objects
or in the form of data objects. When storing or generating keys (secret or private), the module imposes
some restrictions on how these keys are handled. Security policy enforcement is described in more detail
in section 7.2.
7.1.1 Object Model
All user data is managed by the module as objects. Objects are owned by external processes/users and
manipulated by the module. They are characterized by different attributes used by the module to
determine the handling rules to be applied. The module provides two ways of storing objects: permanent
(also known as PKCS #11 token objects) and volatile (also known as session objects). Permanent
objects are kept inside the module even when no power is applied to it. They are stored encrypted in a
flash memory device. Session objects only exist when power is applied to the module and they are
stored in volatile RAM.
The Luna® object model is very closely related to the PKCS#11 standard. More details on the Luna®
interface are provided in the Luna® Interface Control Document [6].
7.1.2 Multi-Session Capability
The Luna® PCI-E cryptographic module manages communication with external processes on a per
session basis. Applications running on the host system requiring data and cryptographic services from
the module have to open a session with the module before gaining access to the module’s functions and
objects. The session provides a logical connection between the application and the module and it is the
session to which the authentication state is bound. It is possible for an application to open multiple
sessions with the module or to have multiple applications each opening different sessions with the
module.
The module provides a higher level of connection abstraction based on an Access ID that associates a
group of sessions to a particular application. This approach allows an application or applications to share
sessions, and associated authentication state, within the scope of that Access ID.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 74 of 111
7.1.3 TOE Roles
The following roles are supported by the TOE:
• Security Officer (SO) – authorised to install and configure the TOE, set and maintain security
policies, and create and delete users (Crypto Officer and Crypto User roles). The TOE can have
only one SO.
• Crypto Officer (CO) – authorised to create, use, destroy and backup/restore cryptographic
objects.
• Crypto User – authorised to use cryptographic objects (e.g., sign, encrypt/decrypt).
The Crypto Officer and Crypto User interface to the Luna® PCI-E for cryptographic operations using the
supplied non-TOE software. Utility software is also provided to enable easier access to commonly used
functionality. The Security Officer uses a separate Command Line Interface (CLI), which is part of the
interface software, to perform configuration, security policy settings and user creation/deletion. The CLI is
also used by the Crypto Officer to perform backup and restoration of cryptographic objects.
The TOE allows for the creation of multiple users in the Crypto Officer and Crypto User roles. Each user
is created within a cryptographically separated partition in the Luna® PCI-E cryptographic module and
each partition must have one and only one user in the Crypto Officer role. A partition may also have one
and only one user in the Crypto User role.
7.1.4 Multi-User Capability
A user must access the module through a session. Sessions are initially opened as Public sessions and
may remain Public or become Private (authenticated) following a successful user authentication. Session
states are kept separate based on the user authentication state stored by the module. The module allows
multiple user identities to be authenticated at a time. Once authenticated, a session becomes bound to
the user identity and has access to all cryptographic operations appropriate to the user’s role and may
access private objects generated on behalf of the user in previous sessions. Although there may be
many users authenticated to the cryptographic module, there is effectively only one thread of execution
within the module and, therefore, only one command being executed from request through to response at
any given time.
7.2 Capability and Policy Settings
The Luna®
PCI-E was designed with the flexibility needed to support a number of different product
variants. The main method used to control the behaviour of different products is a fixed set of
“capabilities” set at the factory. The settings made for the TOE configuration are shown in sub-sections
7.2.1 and 7.2.2. For each of the capabilities, a corresponding policy element exists. The SO establishes
the policy that will govern the cryptographic module’s operation, according to the requirements of the
customer organization, by enabling/disabling or refining the corresponding policy elements to equate to or
to be more restrictive than the pre-assigned capabilities.
Policy set elements can only refine capability set elements to more restrictive values. Specifically, if a
capability is set to allow, the corresponding policy element may be set to either enable or disable.
However, if a capability is set to disallow, the corresponding policy element is set to disabled and is not
SO-configurable. Thus, an SO cannot use policy configuration to lift a restriction set in a capability
definition.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 75 of 111
There are also several elements of the cryptographic module’s behaviour that cannot be changed, these
specific elements are the following:
• Non-sensitive secret keys are not allowed.
• Non-sensitive private keys are not allowed.
• Non-private (Public) secret keys are not allowed.
• Non-private (Public) private keys are not allowed.
• Creation of secret keys and private keys through the PKCS #11 create object interface is not
allowed. That is, the API cannot be used to create keys by passing in known plaintext values.
In the next two sub-sections, all capability elements described as “enable some functionality” are Boolean
values where false (or zero) equates to disallow the functionality and true (or one) equates to allow the
functionality. The remainder of the elements are integer values with either the default value or the
maximum in number of bits shown.
Except as noted, all Boolean capabilities are allowed (i.e. configurable by the SO).
7.2.1 Cryptographic Module Level Capabilities
The following is the set of capabilities supported at the module level and relevant to the scope of the CC
certification:
• 0: Enable PIN-based authentication (disallowed in CC configuration – must be disabled)
• 1: Enable PED-based authentication (required in CC configuration – must be enabled)
• 6: Enable masking (disallowed in CC configuration – must be disabled)
• 7: Enable cloning
• 12: Enable non-FIPS algorithms (disallowed in CC configuration – must be disabled)
• 15: Enable SO reset of partition PIN
• 16: Enable network replication
• 17: Enable Korean Algorithms (disallowed in CC configuration – must be disabled)
• 20: Enable Remote Authentication (disallowed in CC configuration – must be disabled)
• 21: Enable forcing user PIN change
• 22: Enable offboard storage
• 23: Enable partition groups (disallowed in CC configuration – must be disabled)
• 25: Enable remote PED usage
• 26: Enable External Storage of MTK Split
• 28: Enable HA mode CGX (disallowed in CC configuration – must be disabled)
• 29: Enable Acceleration (must be enabled in CC configuration)
• 30: Enable unmasking (disallowed in CC configuration – must be disabled)
• 31: Enable FW5 compatibility mode
• 34: Enable ECIES support.
7.2.2 Partition Level Capabilities
The following is the set of capabilities are supported at the partition level.
• 0: Allow private key cloning
• 1: Allow private key wrapping
• 2: Allow private key unwrapping
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 76 of 111
• 3: Allow private key masking (disallowed in CC configuration – must be disabled)
• 4: Allow secret key cloning
• 5: Allow secret key wrapping
• 6: Allow secret key unwrapping
• 7: Allow secret key masking (disallowed in CC configuration – must be disabled)
• 10: Allow multipurpose keys
• 11: Allow changing key attributes
• 14: Challenge for authentication not needed (disallowed in CC configuration – must be
disabled)
• 15: Ignore failed challenge responses (disallowed in CC configuration – must be disabled)
• 16: Operate without RSA blinding
• 17: Allow signing with non-local keys
• 18: Allow raw RSA operations
• 20: Max failed user logins allowed
• 21: Allow high availability recovery
• 22: Allow activation
• 23: Allow auto-activation
• 25: Minimum pin length
• 26: Maximum pin length
• 28: Allow Key Management Functions
• 30: Allow Remote Authentication (disallowed in CC configuration – must be disabled)
• 31: Allow private key unmasking (disallowed in CC configuration – must be disabled)
• 32: Allow secret key unmasking (disallowed in CC configuration – must be disabled)
The following capabilities are only configurable at the partition level if cloning is allowed and enabled at
the cryptographic module level:
• 0: Allow private key cloning
• 4: Allow secret key cloning
The following capabilities are only configurable if masking is allowed and enabled at the cryptographic
module level:
• 3: Allow private key masking (disallowed in CC configuration – must be disabled)
• 7: Allow secret key masking (disallowed in CC configuration – must be disabled)
• 31: Allow private key unmasking (disallowed in CC configuration – must be disabled)
• 32: Allow secret key unmasking (disallowed in CC configuration – must be disabled)
7.3 IT Security Functions
7.3.1 User Identification and Authentication
A user is defined as an entity that acts to perform an operation on the TOE. In most instances, this will be
a host application program such as a PKI Certification Authority implementation. The TOE supports three
user roles: Security Officer (SO), Crypto Officer (CO), and Crypto User (CU). For a user to assume any
role the module enforces user identification and authentication.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 77 of 111
The TOE requires that all users (SO, CO and CU) be authenticated by proving knowledge of a secret
shared by the user and the cryptographic module. When the module is first powered on, no users are
authenticated and actions are limited to those stated in section 7.3.1.1.
The TOE generates the authentication secrets using its DRBG. For the SO, the authentication secret is a
48-byte random secret and it is generated at the time the cryptographic module is initialised. For Users,
the authentication secrets consist of a 48-byte random secret and separate challenge secret; these are
generated at the time the partition is created by the SO. The authentication secret(s) are provided to the
operator via the trusted PIN entry device and must be entered by the operator via the trusted PIN entry
device and via a logically separate trusted channel (in the case of the response based on the challenge
secret) during the login process. Both the Crypto Officer and the Crypto User use the same 48-byte
random secret. If a Partition is created with Crypto Officer and Crypto User roles, a separate challenge
secret is generated for each role.
SO authentication requires the transmission to the cryptographic module of separate credentials via a
trusted PIN entry device.
User authentication is a two-stage process. The first stage is termed “Activation” and is performed using
a locally attached trusted PIN entry device or optionally for the CO and CU roles a remote trusted PIN
entry device.
To proceed with the activation stage, the login command must be sent to the host via a command line
command issued over the local serial or remote connection. Parameters passed to the command also
specify the identity of the user that the operator wants to assume.
Once Activation has been performed by an authenticated Crypto Officer, the partition data is ready for
use within the cryptographic module. Access to key material and cryptographic services, however, is not
allowed until the second stage of authentication, equivalent to “User Login”, has been performed. This
requires the input of a partition’s challenge secret as part of an application program’s login operation.
The authentication challenge secret (or secrets if both the Crypto Officer and Crypto User roles are used)
for the partition is generated by the cryptographic module as a random 75-bit value that is transmitted as
a 16-character string intended to be displayed on the trusted PIN entry device. The challenge secret is
then provided, via a secure out-of-band means, to each external entity authorised to connect to the
partition and is used by the external entity to form the response to a random one-time challenge from the
cryptographic module. The encrypted one-time response is returned to the cryptographic module where it
is verified to confirm the “User Login”.
For the purposes of the scope of this certification, only a single step of each login process is considered
being: (1) PED key presentation for the SO via local PED and (2) Challenge-Response mechanism for
the CO and CU. Further, in the CC approved configuration as covered in [24], all SO login alongside
initialization of roles must be performed with a Trusted PIN Entry Device connected directly to the PCI-E
card.
The TOE enforces a maximum login attempts policy. This feature serves to prevent an exhaustive search
approach to find the authentication data of the SO, CO or CU. The implementation of this feature differs
for an SO authentication data search and a User authentication data search.
In the case of a CO:
If “y” consecutive CO logon attempts fail (“y” is defined by the SO in the configurable policy for the
partition), the TOE will either lock the partition or erase the partition, as defined by the SO in the
configurable policy. If it has been locked, the partition must be unlocked by the SO in order to
allow user login. If it has been erased, the partition cannot be recovered directly. If recovery is
required, the SO must create a new partition and the new Crypto Officer must recover the
partition’s data from a backup module.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 78 of 111
In the case of a CU:
If “y” consecutive CU logon attempts fail (“y” is defined by the SO in the configurable policy for the
partition), the TOE lock the partition, as defined by the SO in the configurable policy. If it has
been locked, the partition must be unlocked by the CO in order to allow CU login.
In the case of the Security Officer:
If three (3) consecutive SO logon attempts fail, the module is zeroised and must be re-initialised.
Following a successful login, the user is bound to the subject acting on its behalf by having the User
Authorization Vector (UAV) data included in the state data maintained by the session manager. In the
case of the Luna® PCI-E cryptographic module the subject acting on behalf of a user is a session. The
relationship between the user and the session is discussed in more detail in section 7.1.4 and the data
contained in the UAV is described in section 7.3.3.
It is not possible for a user to be bound to more than one role simultaneously. To assume a different role,
the user must log out and log in as the new role. Subsequent authentication requests will be subject to
the same authentication checks (i.e., Activation and User Login).
Authentication state information is not persistent across power cycles or reboot operations.
7.3.1.1 Unidentified and Unauthenticated Users
The TOE allows the following actions on behalf of the user to be performed before the user is identified:
• Get (container info, HSM/container capability set, HSM/container policy set, all accesses,
mechanism info, handle, OUID, container status)
• Query container configuration
• Query container object identify (from known OUID or object handle)
• Session manager functions (open, close all, open/close/clean access)
• Self-test
• HSM deactivation
• PED (connect, disconnect, configuration)
• MTK functions (unlock challenge / response, restore, resplit, zeroize)
• Retrieve license list and query license details
• Perform Host-to-HSM communication channel tests;
• Query log status and submit external log messages for addition to secure audit log;
• Submit data to be tunneled from Host-to-Luna PCI-E external USB interface;
The user must be identified before any other TSF-mediated action is allowed to proceed.
The TOE allows the following actions on behalf of the user to be performed before the user is
authenticated:
• [All operations permitted prior to identification (above)];
• Zeroize
• Login against a container or request login against a paired HA container.
• Object handler functions (create, modify, destroy, and get attributes…)
• Get Random
• Session manager functions (insert / extract context, close, get session info)
• Digest functions
• Request a challenge
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 79 of 111
The user must be authenticated before any other TSF-mediated action is allowed to proceed.
7.3.2 Authentication Data Selection
The User authentication data is a 48-byte value that is randomly generated by the module and stored on
a compatible token (e.g. SafeNets iKey) plus the Crypto Officer and Crypto User Challenge Secrets,
which are initially provided to the user via the trusted PIN entry device. . The TOE allows for user in the
role of either Crypto Officer or Security Officer to change their respective authentication data.
7.3.3 User Account Data
The Security Officer is the only role allowed to create users, modify user status and delete users. The
TOE maintains a user’s account data in a User Authorization Vector (UAV) that is stored in memory
reserved for the TOE’s use. The UAV includes the following data:
• User ID number
• User checkword
• User function vector
• User failed login count
• User “lockout” status
The User checkword contains the User’s secret key, Crypto Officer and Crypto User Challenge Secrets,
and a validation string encrypted using a key derived from the User’s authentication data. The secret key
is randomly generated by the module at the time the User is created and is used to encrypt a User’s
objects on the module. The validation string is a known byte string used to verify that the checkword has
been decrypted correctly. The checkword, itself, is stored encrypted using a key derived from the
authentication data.
7.3.4 Access Control
The TOE enforces an identity-based access control policy that applies to all objects on the module, in
particular to private key and secret key objects, and governs a subject’s access to an object using the
following operations:
• Read (Query Attribute Value)
• Modify
• Destroy
• Generate119
• Wrap (export of Secret Keys)
• Use120
• Clone
119
The Generate operation is intended primarily to indicate symmetric key or asymmetric key pair
generation. However, it also includes other methods of creating an object in the TOE, such as importing
(unwrapping) a key and generic data object creation.
120
The Use operation includes symmetric key encryption/decryption, private key signing and decryption,
and public key verification and encryption.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 80 of 111
A subject’s access to objects stored on the module is mediated on the basis of the following subject and
object attributes:
• Subject attributes:
o Session and Access ID
o User ID associated with session (Access Owner)
o Role.
• Object attributes:
o Private. If True, object is Private. If False, object is Public.
o Owner. Object ownership is assigned to the object creator, if the object is Private. Public
objects are not owned by a user. Ownership is enforced by user identity and internal key
management.
o Sensitive. If True, object is Sensitive. If False, object is Non-Sensitive.
o Extractable. If True, object may be extracted. If False, object may not be extracted.
o Modifiable. If True, object may be modified. If False, object may not be modified.
Private data objects are labeled with a number corresponding to their owner and sensitive attributes are
encrypted using the owner’s secret key. Private data objects are only accessible by the object owner.
Public data objects may be accessed by any user with an active session on the module. Secret key and
private key objects are always created as Private, Sensitive objects and can only be used for
cryptographic operations by a logged in User. Only data and certificate objects can be non-sensitive.
Secret key objects that are marked as extractable may be exported from the module using the Wrap
operation.
The module does not allow any granularity of access other than owner or public (i.e., a Private data object
cannot be accessible by two users and restricted to other users). Ownership of an object gives the owner
access to the object through the allowed operations but does not allow the owner to assign a subset of
rights to other users. Allowed operations are those permitted by the configurable policy settings in
sections 7.2.1 and 7.2.2.
7.3.5 Object Reuse
The TOE enforces an object reuse policy in that every object is allocated its own portion of memory (flash
or volatile RAM). Permanent objects (stored in flash) are maintained in an encrypted state at all times,
and their information content is, therefore, never available except when decrypted for use in volatile
memory within the TSF boundary. The policy also ensures that no permanent object is placed in a
previously allocated memory location unless all previous memory content is purged and zeroised. When
cryptographic functions are performed, a cryptographic context is created to hold data required by the
function (e.g., an AES key schedule for an AES function). The cryptographic context only exists in
volatile RAM memory and is not accessible to any functions except those defined by its owner function.
The memory assigned to a cryptographic context is always purged of its content before being handed
over to another function. Direct access to either volatile or flash memory locations is never provided to
users; all user interaction with the objects within the module is via memory handles.
7.3.6 Data Authentication
The TOE provides data authentication at two different levels. At the first level, the TOE calculates the
SHA-1 fingerprint of each object it stores and the user may query the value of the fingerprint at any time.
This allows the user to verify the continuing validity of the object.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 81 of 111
At the second level, the TOE will generate evidence of the validity of a private key and its corresponding
public key in a special digitally signed certificate format, known as a Public Key Confirmation. The
signature is performed using a private key that is either generated by SafeNet specifically for this purpose
and whose public key certificate has been signed by the SafeNet trust anchor or generated by a customer
organization and whose public key certificate has been signed by a third-party CSP or Trust Centre. The
Public Key Confirmation permits a user to verify the validity of an asymmetric key pair, verify that the TOE
generated it and identify the trusted third party providing the guarantee of validity and origin.
7.3.7 Key Export and Import Protection
Secret (Symmetric keys) may only be exported from the TOE boundary in a wrapped (encrypted) form if
the Extractable attribute is True. This feature is supported on all TOE configurations, whether or not
cloning (backup) is supported. Private keys (Asymmetric) may be exported from the TOE boundary when
cloned between HSMs – using the cloning (backup) configuration, or wrapped when private key wrapping
is enabled. If the Extractable attribute is False, the key may not be exported from the module boundary
under any condition.
Objects may be imported into the module under the control of the Access Control policy. Secret keys
and/or private keys generated in the host IT environment may only be imported into the module by an
unwrapping operation on the module. Unwrapped keys have their Sensitive attribute set to True by the
TOE. The configurable policy for a partition may also be set to prohibit the use of externally generated
private keys for signing operations.
Wrapping and unwrapping of key material between the TOE and other entities can only take place if prior
agreement has been reached regarding the key to be used for the wrap and unwrap operations. This can
either be through key sharing of a secret key for use with a symmetric encryption algorithm or through the
use of the public key of the intended recipient with an asymmetric encryption algorithm.
7.3.8 Cryptographic Material Management
Cryptographic material (key) management functions protect the confidentiality of key material throughout
its life-cycle. The following functions are provided by the module to support this:
(1) Deterministic Random Bit Generator (DRBG) based on CTR-DRBG with AES256 from NIST SP
800-90 (section 10.2.1) as used for all cryptographic strength entropy.
(2) Cryptographic key generation in accordance with the following indicated standards:
a. RSA 1024, 2048, 3072 and 4096 bits key pairs in accordance with ANSI X9.31 and FIPS
PUB 186-3121
b. TDES 112 bits and 168 bit keys (NIST SP 800-67).
c. AES 128, 192, 256 bit keys (FIPS PUB 197).
d. DSA 1024, 2048 and 3072 bit key pairs in accordance with FIPS PUB 186-3.
e. Elliptic Curve key pairs (curves P-192, P-224, P-256, P-384, P-521, K-163, K-233, K-283,
K-409, K-571, B-163, B-233, B-283, B-409 and B-571 in accordance with SP 800-57) in
accordance with FIPS PUB 186-3.
(3) EC Diffie-Hellman (ECDH) (curves P-192, P-224, P-256, P-384, P-521, K-163, K-233, K-283, K-
409, K-571, B-163, B-233, B-283, B-409 and B-571 in accordance with SP 800-57) key
establishment in accordance with NIST SP 800-56A.
121
FIPS PUB 186-3 only allows 1024, 2048 and 3072-bit RSA keys
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 82 of 111
(4) Symmetric key wrap / unwrap: TDES 168 bits and AES 128, 192, and 256 bits in accordance
with PKCS #11 (key transport provides 112 bits of security strength with TDES and between 128
and 256 bits of security strength with AES).
(5) Asymmetric key wrap / unwrap: RSA 1024 – 4096 (RSAES-OAEP from PKCS #1 v2.1) (key
transport provides between 80 and 152 bits of security strength).
(6) Encrypted key storage (using AES 256 bit encryption and key access following the PKCS #11
standard.
(7) Derivation of keys using Counter Mode KDF with AES or TDES from SP 800-108.
(8) Destruction of cryptographic keys using one of three ways as described below:
a. An object on a Luna® cryptographic module that is destroyed using the PKCS #11 function
C_DestroyObject is marked invalid and remains encrypted with the Partition User's key or a
Luna® cryptographic module’s general secret key until such time as its memory locations
(flash or RAM) are re-allocated for additional data on a Luna® cryptographic module, at
which time they are purged and zeroised before re-allocation.
b. Objects on a Luna® cryptographic module that are destroyed as a result of authentication
failure are zeroised (all flash blocks in the Partition User’s memory turned to 1's). If it is an
SO authentication failure, all flash blocks used for key and data storage on a Luna®
cryptographic module are zeroised.
c. Objects on a Luna® cryptographic module that are destroyed through C_InitToken (the SO-
accessible command to initialize a Luna® cryptographic module available through the API)
are zeroised, along with the rest of the flash memory being used by the SO and Partition
Users.
7.3.8.1 Key Storage and Access Protection
Keys are always stored as secret key or private key objects with the Sensitive attribute set. The key
value is, therefore, stored in encrypted form using the owning Partition User’s Storage Key (USK) and the
Master Tamper Key (MTK) stored in the battery-backed RAM. Access to keys is never provided directly
to a calling application. A handle to a particular key is returned that can be used by the application in
subsequent calls to perform cryptographic operations.
Private key and secret key objects may be imported into a module using the Unwrap or Derive operation
under the control of the Access Control Policy. Any externally-set attributes of keys imported in this way
are ignored by a module and their attributes are set by a module to values required by the Access Control
Policy.
7.3.8.2 Key Cloning
Key cloning is a Luna®
product feature that uses a one-time AES-256 key as a session key to encrypt an
object being transferred from one Luna® module to another. Objects transferred using the cloning
protocol may be keys, user data, or module data. The AES session encrypting key is obtained by
combining the 24 byte cloning domain value (randomly generated by the module) with random one-time
data generated by source and target modules and exchanged using RSA 4096-based transport.
7.3.8.3 Key Wrap / Unwrap
The key wrap operation encrypts a key value for output, using either an RSA public key (only if wrapping
a symmetric key) or a symmetric key to wrap another symmetric key.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 83 of 111
The unwrap operation takes as input an encrypted key value and a handle to the key that was originally
used to do the wrapping. It decrypts the key value, stores it in the module as a key object and returns the
handle to the imported key.
Note that for both wrap and unwrap operations, the user (or calling application acting on the user’s behalf)
never has access to the actual key values – only handles assigned to the key objects in the module.
Keys and key components imported and exported through the use of wrapping/unwrapping operations
are validated during the wrapping/unwrapping operation and protected from modification through the use
of the specified encryption method.
7.3.9 Cryptography
Because of its generic nature, the module’s cryptographic co-processor and firmware support a wide
range of cryptographic algorithms and mechanisms. The TOE supports the following cryptographic
functions:
• Signature Generation and Validation:
o RSA with a supported modulus length between 1024-4096 bits (RSASA-PSS from PKCS
#1 v2.1, FIPS PUB 186-3) and with SHA-1, SHA-224, SHA-256, SHA-384, SHA-512
(FIPS PUB 186-3).
o RSA with modulus length between 1024-4096 bits (FIPS PUB 186-3 and ANSI X9.31)
and with SHA-1, SHA-224, SHA-256, SHA-384, SHA-512 (FIPS PUB 186-3).
o DSA signature generation and validation with supported modulus length 1024, 2048 and
3072 bits with SHA-1, SHA-256, SHA-384, SHA 512 (FIPS PUB 186-3).
o ECDSA signature generation and validation curves P-192, P-224, P-256, P-384, P-521,
K-163, K-233, K-283, K-409, K-571, B-163, B-233, B-283, B-409 and B-571 with SHA-1,
SHA-256, SHA-384, SHA 512 (FIPS PUB 186-3).
• Message Digest:
o Hash generation SHA-1, SHA-224, SHA-256, SHA-384, SHA-512 (FIPS PUB 180-4).
• Data Encryption and Decryption:
o AES in ECB, CBC or GCM modes with key sizes 128, 192 and 256 bits (FIPS PUB 197).
o Triple DES in ECB, CBC or CFB-8 modes with key sizes 112 and 168 bits (NIST SP 800-
67)
o RSA with a supported modulus length between 1024-4096 bits (RSAES-OAEP from
PKCS #1 v2.1)
• Deterministic Random Number Generation:
o CTR-DRBG using AES256 (NIST SP 800-90, Section 10.2.1).
• Message Authentication Code Generation and Validation:
o HMAC using SHA-1, SHA-224, SHA-256, SHA-384, SHA-512 (FIPS PUB 198-1).
o TDES MAC (FIPS PUB 113).
o AES CMAC with 128, 192 and 256 bit keys (NIST SP 800-38B).
o TDES CMAC with 112 and 168 bit keys (NIST SP 800-38B).
o AES GMAC with 128, 192 and 256 bit keys (NIST SP 800-38D).
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 84 of 111
• Key Derivation:
a. Counter Mode KDF and either AES or TDES (NIST SP800-108).
7.3.10 Data Exchange
The TOE provides security functions that support secure data exchange in two main ways:
• Data integrity and authenticity is protected through the use of RSA and DSA digital signatures.
The digital signature of the data object provides evidence of data validity. The TOE provides
logged in Users the ability to generate evidence in the form of a digital signature provided they
have access to the private signing key and to verify the evidence and the identity of the originator
who generated the evidence provided they have possession of the digitally signed information
and access to the signer's verification public key.
• Data confidentiality is protected through the use of symmetric and/or asymmetric
encryption/decryption of user data and in the Wrapping and Unwrapping operations.
7.3.11 Specification of Security Management Functions
The TOE provides the following security management functions:
• disable, enable and modify the behaviour of configurable policy settings at the HSM and Partition
levels (FMT_MOF.1),
• change_default, query, modify and delete the security attributes User Locked Flag,
• modify the security attributes UAV – Checkword,
• change_default and delete the security attributes User ID and UAV – Checkword,
• change_default and modify the security attributes SOV – Checkword,
• modify the security attributes CKA_PRIVATE (for data and certificate objects only),
CKA_EXTRACTABLE (for secret keys only), CKA_DERIVE (for secret keys only) and
CKA_MODIFIABLE,
• change_default the Number of User Login Failures Allowed.
Details of these management capabilities are provided in sections 7.3.12 and 7.3.13.
7.3.12 Security Function Management
The TOE provides security management capabilities for the Security Officer (SO) to disable, enable and
modify the behaviour of the functions listed below.
• The set of policies supported at the HSM level are defined in section 7.2.1.
• The set of policies supported at the partition level are defined in section 7.2.2.
7.3.13 Security Data Management
The TOE allows the Security Officer and the Crypto Officer to manipulate security-relevant data stored on
the module. Specifically, it allows only the Security Officer to change the default values of the settings
listed below:
• Number of failed Partition User logins allowed before partition is locked out/cleared. (Default is
10, SO can configure to be 3 <= N <= 10)
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 85 of 111
The User Authorization Vector, described in section 7.3.3, is the data structure used by the module to
store the user’s security attributes. The TOE restricts the ability to manipulate the UAV data as described
below:
• Only the Security Officer role can change_default, query, modify and delete the UserLockedFlag.
• Only the Security Officer role can change_default and delete the:
o UserID.
o Checkword, which includes the user secret key plus a fixed value used for authentication
in encrypted form.
• Only the Security Officer and User roles can modify the Checkword (for the SO or applicable User
ID).
The Access Control policy also restricts the ability to modify, the security attributes CKA_PRIVATE (for
data and certificate objects only), CKA_EXTRACTABLE (for secret keys only), CKA_DERIVE (for secret
keys only) and CKA_MODIFIABLE to the Crypto Officer role.
The TOE assigns default attributes to objects as they are created. The creator of the object may specify
values different from the defaults with the exceptions described below.
There are security-relevant object attributes that are set to restrictive default values that cannot be
changed by anyone. These attributes and their settings are the following:
• The CKA_SENSITIVE attribute is set TRUE for all secret and private key objects.
• The CKA_EXTRACTABLE attribute is set FALSE for all private key objects.
7.3.14 Logical Self-Protection of Security Functions
The TOE ensures the logical protection of its security functions from attempts to subvert or bypass
security enforcement by implementing a number of self-protection measures. The main self-protection
features are described below.
7.3.14.1 Memory and Firmware Integrity Check
The Boot Loader provides an integrity check to ensure the integrity of the firmware and to ensure the
integrity of any permanent security-critical data stored within the cryptographic module. The firmware
integrity is protected by a SHA-1 hash. The firmware’s integrity is checked when the firmware is initially
loaded or updated and every time the module is started. The module will halt if the firmware integrity is
not verified. Similarly, the module’s memory is checked for consistency every time the module is started
and the module will halt if the memory consistency check fails.
7.3.14.2 Self-Tests
The TOE performs a number of tests of security-critical functions each time it is activated. The TOE
offers two categories of self-tests that can be called up by the user at any time: hardware and
cryptographic checks. The hardware self-test verifies access to all of the volatile RAM memory. The
cryptographic self-tests perform a test of all of the cryptographic algorithms provided by the module. The
cryptographic self-tests are based on a known answer test methodology where a known key, or initial
configuration, is used to process a known data input and the result obtained is compared to a previously-
calculated answer.
7.3.14.3 Prevention of By-pass and Separate Execution Domain
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 86 of 111
The TOE prevents bypass by ensuring that TSP enforcement functions are invoked and succeed before
allowing a subsequent firmware function to proceed. It maintains a separate domain for its own execution
that is protected from external agents. It also separates users by encrypting private objects with the
user’s secret key and by allowing only one thread of execution on the module at any one time and,
therefore, allowing only one user’s command to be active at any time.
7.3.14.4 Preservation of Secure State
The TOE preserves itself in a secure state in the event of failures detected by the abstract machine test
and self-test functions. Behaviour in the event of other failure conditions is described in sub-section
7.3.17.
7.3.15 Cloning
For performance and secure backup purposes, Luna® PCI-E cryptographic modules may be grouped in
clusters that are referred to as "domains." A domain is established by generating a 24 byte secret, known
as a cloning domain key or cloning domain identifier, on one module (that could be considered to be the
“master” for the domain) and transferring the secret securely to other modules that are to be part of the
domain. The cloning domain key is then used during the mutual authentication and key agreement
exchange that takes place between modules, or between a Luna® PCI-E and a corresponding
cryptographic module acting as a backup, as described briefly below. This mutual authentication ensures
that the two modules participating in the cloning operation belong to the same cloning domain and can
thus participate in the cloning process.
When modules are members of a domain, they must be capable of operating in such a way that they
behave as one identical module to the calling application. The cloning function provides the capability to
duplicate the cryptographic state of a module by cloning token objects from a source module to a target
module within the same cryptographic domain in a cryptographically protected fashion that prevents
modification and disclosure.
When cloning is invoked, the cloning protocol protects security-relevant data from disclosure and
modification when it is transferred between the TOE and the remote trusted component (i.e. another
Luna® PCI-E module). The protocol is designed such that source and target modules both participate in
ensuring that objects are all transferred correctly between modules. It also ensures that any data
exchanged during the cloning operation cannot be replayed in order to gain unauthorised access to the
module. The source module maintains its original state and, therefore, any sort of failure of the cloning
function will not result in a loss of use of the original objects.
The cloning protocol implements a mutual authentication mechanism to ensure that both modules are
members of the same domain by providing mutual authentication of the two modules. The mechanism
uses cryptographic techniques to provide mutual authentication, proof of origin, integrity and
confidentiality of the objects being transferred from source to target module within a domain. The key
management scheme used within the cloning protocol also protects against replay attacks and minimizes
the impact of possible key compromise or modification by ensuring that a unique AES key is used for
each cloning operation.
7.3.16 Physical Self-Protection
The module’s physical design was developed to limit the effectiveness of passive attacks via conducted
and radiated emissions.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 87 of 111
7.3.17 Failure Handling
If power is lost to the module for whatever reason, permanent objects (private keys, etc.) are preserved
and remain cryptographically protected; session objects are cleared from the module. The module can
be placed back into operation without compromise of its functionality or permanently stored data. In case
of power failure in the host IT environment, host system restart or other circumstances that do not affect
the module’s operational capability, the module will ensure continued protection of sensitive material and
will permit recovery from the last logged in state.
Data input/output failures would only affect the processing of the current command and, because no
PKCS #11 API function returns sensitive plaintext data, there could be no compromise of the user data
protection capabilities. Because of the way in which commands are handled, the module would remain in
the state it was at the last successful command completion. When data input/output capability is restored
the module would resume operation in that state.
7.3.18 Backup and Recovery
As previously described, the module maintains its secure state in the event of a failure. In the event of a
catastrophic damage to or failure of the module itself, recovery is accomplished via an included backup
module122
as described below.
The TOE provides the capability to securely backup a module using the cloning function (see Section
7.3.8.2). Because the cloning function securely duplicates all objects from the primary module to the
backup module, the backup module allows recovery by cloning the backed up objects to a new module
that has been initialised with the same cloning domain. The basic data authentication mechanism
described in section 7.3.6 can be used at both the TOE and the backup module before and after cloning
operations to ensure the integrity of backed up and restored key objects.
122
Only applicable to TOE configurations including Backup HSM
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 88 of 111
8 RATIONALE TABLES
8.1 Introduction
The following tables provide mappings and descriptions of the rationale for the Security Objectives, IT
Security Requirements and Dependencies, Assurance Measures and Security Functional Requirements.
• Table 8-1 demonstrates the necessity of the security objectives and their appropriateness in
countering the stated threats and providing for the stated assumptions.
• Table 8-2 demonstrates the necessity of the security objectives and their appropriateness in
countering the stated threats and providing for the stated assumptions.
• Table 8-3 demonstrates interdependency of Security Functional Requirements with rationale.
• Table 8-4 provides a mapping of IT Security Functions to IT Security Requirements and Security
Functional Requirements (SFRs).
Note: A mapping of the Security Objectives Rationale was previously presented in Table 4-1.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 89 of 111
8.2 SFR to Objective Mapping
The following table provides the mapping between SFR and Objectives as originating from [Cryptographic Modules, Security Level “Enhanced
Basic”] but updated for changes summarised in Section 2.2 and with extended SFR names added for convenience:
Security Functional Requirement SFR Full Title
O.Endorsed_Crypto
O.I&A
O.Control_Services
O.Control_Keys
O.Roles
O.Keys_Export
O.Key_Generation
O.Key_Import
O.Key_Management
O.Key_Destruction
O.Check_Operation
O.Prevent_Inf_Leakage
FCS_CKM.1 Cryptographic key generation x x x
FCS_CKM.2/ Private_Key_Import Cryptographic key distribution – Secret Key
Import
x x x
FCS_CKM.2/
Secret_Symmetric_Key_Import
Cryptographic key distribution – Private Key
Import
x x x
FCS_CKM.2/Cloning_Import Cryptographic key distribution – Cloning Import x x x
FCS_CKM.2/Secret_Key_Export Cryptographic key distribution – Secret Key
Export
x x x
FCS_CKM.2/Secret_Symmetric_Key
_Export
Cryptographic key distribution – Secret
Symmetric Key Export
x x x
FCS_CKM.2/Cloning_Export Cryptographic key distribution – Cloning Export x x x
FCS_CKM.4 Cryptographic key destruction x x x
FTP_ITC.1/Cloning Inter-TSF trusted channel - Cloning x x x
FCS_COP.1/Sign Cryptographic operation - Digital signature x
FCS_COP.1/Digest Cryptographic operation - Message digest x
FCS_COP.1/RSA_Enc_Dec Cryptographic operation - RSA
Encrypt/Decrypt
x
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 90 of 111
Security Functional Requirement SFR Full Title
O.Endorsed_Crypto
O.I&A
O.Control_Services
O.Control_Keys
O.Roles
O.Keys_Export
O.Key_Generation
O.Key_Import
O.Key_Management
O.Key_Destruction
O.Check_Operation
O.Prevent_Inf_Leakage
FCS_COP.1/TDES_Enc_Dec Cryptographic operation - TDES
Encrypt/Decrypt
x
FCS_COP.1/AES_Enc_Dec Cryptographic operation - AES
Encrypt/Decrypt
x
FCS_COP.1/Key_Derive Cryptographic operation – Key Derive x
FCS_COP.1/MAC Cryptographic operation – MAC x
FCS_RNG.1 Random number generation x
FIA_ATD.1 User attribute definition x
FIA_UID.1 Timing of identification x
FIA_UAU.1 Timing of authentication x
FIA_UAU.6 Re-authenticating x
FIA_UAU.7 Protected authentication feedback x
FIA_USB.1 User-subject binding x
FIA_AFL.1/CO Authentication failure handling – Crypto Officer x
FIA_AFL.1/SO Authentication failure handling – Security
Officer
x
FIA_AFL.1/User Authentication failure handling – User x
FDP_ACC.2/Key_Man Complete access control – Key Management. x x
FDP_ACF.1/Key_Man Security attribute based access control –Key
Management.
x x
FDP_ACC.2/Oper Complete access control – Cryptographic
Operation.
x
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 91 of 111
Security Functional Requirement SFR Full Title
O.Endorsed_Crypto
O.I&A
O.Control_Services
O.Control_Keys
O.Roles
O.Keys_Export
O.Key_Generation
O.Key_Import
O.Key_Management
O.Key_Destruction
O.Check_Operation
O.Prevent_Inf_Leakage
FDP_ACF.1/Oper Security attribute based access control –
Cryptographic Operation.
x
FDP_ACC.2/Mode_Trans Complete access control – Mode Transition. x
FDP_ACF.1/Mode_Trans Security attribute based access control – Mode
Transition.
x x
FDP_ITC.2 Import of user data with security attributes x x x
FDP_ETC.2 Export of user data with security attributes x x
FDP_RIP.2 Full residual information protection x
FMT_SMF.1 Specification of Management Functions x
FMT_SMR.2 Restrictions on security roles x x x
FMT_MOF.1/CO Management of security functions behavior –
Crypto Officer
x
FMT_MOF.1/SO Management of security functions behavior –
Security Officer
x
FMT_MTD.1/Admin Management of TSF data - Admin x
FMT_MTD.1/User Management of TSF data - User x
FMT_MSA.1/Key_Man_1 Management of security attributes – (change
default and query)
x x x
FMT_MSA.1/Key_Man_2 Management of security attributes – (modify or
delete)
x x x
FMT_MSA.2 Secure security attributes x x x
FMT_MSA.3 Static attribute initialisation x x x
FPT_TDC.1 Inter-TSF basic TSF data consistency x x x
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 92 of 111
Security Functional Requirement SFR Full Title
O.Endorsed_Crypto
O.I&A
O.Control_Services
O.Control_Keys
O.Roles
O.Keys_Export
O.Key_Generation
O.Key_Import
O.Key_Management
O.Key_Destruction
O.Check_Operation
O.Prevent_Inf_Leakage
FPT_FLS.1 Failure with preservation of secure state x
FPT_EMS.1 TOE Emanation x
FPT_TST.1 TSF testing x
FPT_TST.2 TSF self-testing x
Table 8-1 – Necessity of Security Functional Requirements
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 93 of 111
8.3 SFR Rationale
The following table provides rationale for the inclusion of chosen SFR against objectives:
Objectives Security Functional Requirements Rationale
O.Endorsed_Crypto
FCS_CKM.1
FCS_CKM.2/Secret_Symmetric_
Key_Import
FCS_CKM.2/Private_Key_Import
FCS_CKM.2/Cloning_Import
FCS_CKM.2/
Secret_Symmetric_Key_Export
FCS_CKM.2/Secret_Key_Export
FCS_CKM.2/Cloning_Export
FCS_CKM.4
FCS_COP.1/Sign
FCS_COP.1/Digest
FCS_COP.1/RSA_Enc_Dec
FCS_COP.1/TDES_Enc_Dec
FCS_COP.1/AES_Enc_Dec
FCS_COP.1/Key_Derive
FCS_COP.1/MAC
FCS_RNG.1
FDP_ITC.2
FDP_ETC.2
FCS_CKM.1, FCS_CKM.2/
Secret_Symmetric_Key_Import,
FCS_CKM.2/Private_Key_Import,
FCS_CKM.2/Cloning_Import,
FCS_CKM.2/Secret_Symmetric_Key_Export,
FCS_CKM.2/Secret_Key_Export,
FCS_CKM.2/Cloning_Export, FCS_CKM.4,
FCS_COP.1/Sign, FCS_COP.1/Digest,
FCS_COP.1/RSA_Enc_Dec,
FCS_COP.1/TDES_Enc_Dec,
FCS_COP.1/AES_Enc_Dec,
FCS_COP.1/Key_Derive,
FCS_COP.1/MAC
and FCS_RNG.1 require meeting Endorsed
standards for cryptographic functions.
FDP_ITC.2 and FDP_ETC.2 enforce the use
of Endorsed cryptographic functions for import
and export of confidential cryptographic keys.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 94 of 111
Objectives Security Functional Requirements Rationale
O.I&A
FIA_UID.1
FIA_UAU.1
FIA_UAU.6
FIA_UAU.7
FIA_AFL.1/CO
FIA_AFL.1/SO
FIA_AFL.1/User
FIA_ATD.1
FIA_USB.1
FMT_MTD.1/Admin
FMT_MTD.1/User
FIA_UID.1 allows unidentified users to run
self-test of the TOE only and requires
identification before any other TSF mediated
action.
FIA_UAU.1 allows unauthenticated users to
run self-test of the TOE, identification
according FIA_UID.1 and selection of a
claimed role and requires authentication
before any other TSF mediated action.
FIA_UAU.6 requires re-authentication after
start-up of the TOE and if the user changes
the role after authentication.
FIA_UAU.7 requires limitation of the feedback
to the user while authentication is in progress.
FIA_AFL.1/CO, FIA_AFL.1/SO and
FIA_AFL.1/User require detection and reaction
to unsuccessful authentication attempts.
FIA_ATD.1 requires maintaining security
attributes to individual users including User
identity, Role and Reference authentication
data as prerequisite for identification and
authentication of authorised users.
FIA_USB.1 requires associating the identity
and the role with the subjects acting for the
authenticated user.
FMT_MTD.1/Admin restricts the creation,
clearing and deletion of Reference
Authentication Data to the Security Officer.
FMT_MTD.1/User restricts the ability to modify
the Reference authentication data to the
corresponding user.
O.Roles FMT_SMR.2
FMT_SMR.2 which requires the TOE to
provide at least the Security Officer, the Crypto
Officer, the Crypto User roles, Unidentified
User role, Unauthenticated User role.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 95 of 111
Objectives Security Functional Requirements Rationale
O.Control_Services
FDP_ACC.2/Key_Man
FDP_ACF.1/Key_Man
FDP_ACC.2/Oper
FDP_ACF.1/Oper
FDP_ACC.2/Mode_Trans
FDP_ACF.1/Mode_Trans
FMT_SMF.1
FMT_SMR.2
FMT_MOF.1/CO
FMT_MOF.1/SO
FMT_MSA.1/Key_Man_1
FMT_MSA.1/Key_Man_2
FMT_MSA.2
FMT_MSA.3
FDP_ACC.2/Key_Man and
FDP_ACF.1/Key_Man require access control
to the key management services of the TOE,
FDP_ACC.2/Oper and FDP_ACF.1/Oper
require access control to the cryptographic
operation services of the TOE,
FDP_ACC.2/Mode_Trans and
FDP_ACF.1/Mode_Trans require access
control to the operational modes of the TOE
which limit the available services.
FMT_SMF.1 lists the security management
functions including the management of TSF
behaviour to FMT_MOF.1/CO and
FMT_MOF.1/SO.
FMT_SMR.2 describing the minimum list of
roles and restrictions to these roles.
FMT_MOF.1/CO and FMT_MOF.1/SO limit the
management of TSF behaviour to the specified
authorised roles
FMT_MSA.1/Key_Man_1 and
FMT_MSA.1/Key_Man_2 require limitation to
the management of security attributes of
cryptographic keys, key components and CSP
describing the available services for these
objects.
FMT_MSA.2 and FMT_MSA.3 describe
additional requirements to the management of
security attributes to enforce the access
control SFP for FDP_ACF.1/Key_Man,
FDP_ACF.1/Oper and
FDP_ACF.1/Mode_Trans.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 96 of 111
Objectives Security Functional Requirements Rationale
O.Control_Keys
FDP_ACC.2/Key_Man
FDP_ACF.1/Key_Man
FDP_ACC.2/Oper
FDP_ACF.1/Oper
FMT_MSA.1/Key_Man_1
FMT_MSA.1/Key_Man_2
FMT_MSA.2
FDP_ACF.1/Mode_Trans
FDP_ACC.2/Key_Man and
FDP_ACF.1/Key_Man require access control
to the key keys, key components and other
CSP according to their security attributes,
FDP_ACC.2/Oper and FDP_ACF.1/Oper
require access control to the keys and other
CSP of the TOE according to their security
attributes,
FMT_MSA.1/Key_Man_1 and
FMT_MSA.1/Key_Man_2 require limitation to
the management of security attributes of
cryptographic keys, cryptographic key
components and CSP describing the access
rights, available services and properties for
these objects.
FMT_MSA.2 ensures that only secure values
for cryptographic keys, key components and
CSP are accepted for security attributes.
FDP_ACF.1/Mode_Trans ensures that
operational keys and CSP cannot be used in
maintenance mode and maintenance keys and
CSP cannot be used outside the operational
mode to protect user data.
O.Key_Export
FCS_CKM.2/Secret_Symmetric_
Key_Export
FCS_CKM.2/Secret_Key_Export
FCS_CKM.2/Cloning_Export
FTP_ITC.1/Cloning
FDP_ETC.2
FPT_TDC.1
FCS_CKM.2/ Secret_Symmetric_Key_Export,
FCS_CKM.2/Secret_Key_Export and
FCS_CKM.2/Cloning_Export require the TSF
to distribute keys by export methods meeting
Endorsed standards and provides a refinement
for keys exported for manual import.
FTP_ITC.1/Cloning requires the TSF to
provide a trusted channel for key export.
FDP_ETC.2 requires the TSF to export keys
unambiguously associated with their security
attributes.
FPT_TDC.1 requires ensuring inter-TSF basic
TSF data consistency for exported security
attributes of cryptographic keys, key
components and CSP.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 97 of 111
Objectives Security Functional Requirements Rationale
O.Key_Generation
FCS_CKM.1
FCS_RNG.1
FMT_MSA.3
FCS_CKM.1 requires the use of Endorsed key
generation algorithms
FCS_RNG.1 describes requirements for the
random number generator needed for key
generation.
FMT_MSA.3 requires restrictive values of
security attributes for cryptographic keys and
limits the ability to specify their initial value to
the Crypto officer.
O.Key_Import
FCS_CKM.2/Secret_Symmetric_
Key_Import
FCS_CKM.2/Private_Key_Import
FCS_CKM.2/Cloning_Import
FTP_ITC.1/Cloning
FDP_ITC.2
FPT_TDC.1
FCS_CKM.2/Secret_Symmetric_Key_Import,
FCS_CKM.2/Private_Key_Import and
FCS_CKM.2/Cloning_Import require the TSF
to distribute by key import methods meeting
Endorsed standards and provides a refinement
for manually imported keys.
FTP_ITC.1/Cloning requires the TSF to
provide a trusted channel of key import.
FDP_ITC.2 requires the TSF to import keys
unambiguously associated with their security
attributes.
FPT_TDC.1 requires ensuring inter-TSF basic
TSF data consistency for imported security
attributes of cryptographic keys, key
components and CSP.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 98 of 111
Objectives Security Functional Requirements Rationale
O.Key_Management
FCS_CKM.1,
FCS_CKM.2/Secret_Symmetric_
Key_Import
FCS_CKM.2/Private_Key_Import
FCS_CKM.2/Cloning_Import
FCS_CKM.2/Private_Key_Exort
FCS_CKM.2/Secret_Key_Export
FCS_CKM.2/Cloning_Export
FCS_CKM.4
FTP_ITC.1/Cloning
FDP_ACC.2/Key_Man
FDP_ACF.1/Key_Man
FDP_ITC.2
FDP_ETC.2
FMT_SMF.1
FMT_MSA.1/Key_Man_1
FMT_MSA.1/Key_Man_2
FMT_MSA.2
FMT_MSA.3
FPT_TDC.1
FCS_CKM.1,
FCS_CKM.2/Secret_Symmetric_Key_Import,
FCS_CKM.2/Private_Key_Import,
FCS_CKM.2/Cloning_Import,
FCS_CKM.2/Secret_Symmetric_Key_Export,
FCS_CKM.2/Secret_Key_Export,
FCS_CKM.2/Cloning_Export, and
FCS_CKM.4 provide the Endorsed
cryptographic functions used by key
management.
FTP_ITC.1/Cloning provides a trusted channel
for key import and export.
FDP_ACC.2/Key_Man and
FDP_ACF.1/Key_Man provide the access
control to the key management functions.
FDP_ITC.2 and FDP_ETC.2 ensure the import
and export of cryptographic keys,
cryptographic key components and CSP with
security attribute, which are associated with
these objects for key management.
FMT_SMF.1 list the security management
functions and FMT_SMR.2 the roles for key
management (i.e. the Crypto Officer for
operational keys and the Maintenance
Personnel role for maintenance keys).
FMT_MSA.1/Key_Man_1,
FMT_MSA.1/Key_Man_2 FMT_MSA.2 and
FMT_MSA.3 describes the management of
security attributes of cryptographic keys,
cryptographic key components and CSP.
FPT_TDC.1 ensures the consistency of the
security attributes of cryptographic keys,
cryptographic key components and CSP.
O.Key_Destruction
FCS_CKM.4
FDP_ACF.1/Key_Man
FCS_CKM.4 requires the TSF to provide
Endorsed mechanisms for key destruction.
FDP_ACF.1/Key_Man limits key destruction to
users in the Crypto Officer role.
O.Check_Operation
FPT_TST.1
FPT_TST.2
FPT_FLS.1
FPT_TST.1 and FPT_TST.2 require TSF self-
tests.
FPT_FLS.1 requires the TSF to preserve a
secure state when self-test fails.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 99 of 111
Objectives Security Functional Requirements Rationale
O.Prevent_Inf_Leakage
FDP_RIP.2
FPT_EMS.1
FDP_RIP.2 requires the TOE to ensure that
any previous information content of a resource
is made unavailable.
FPT_EMS.1 requires the TOE to prohibit the
flow of confidential information through any
emanation and “black data” interface.
Table 8-2 – Mapping of Security Functional Requirements to Objectives
8.4 SFR Dependencies
The following SFR dependencies are recorded:
Security Functional Requirement Dependencies Rationale
FCS_CKM.1
[FCS_CKM.2
Cryptographic key
distribution or
FCS_COP.1
Cryptographic operation]
FCS_CKM.4
Cryptographic key
destruction
FCS_CKM.2/Export123
FCS_COP.1124
FCS_CKM.4
FCS_CKM.2/Secret_Symmetric_Key_Export
FCS_CKM.2/Private_Key_Export
FCS_CKM.2/Cloning_Export
[FDP_ITC.1 Import of
user data without
security attributes or
FDP_ITC.2 Import of
user data with security
attributes, or
FCS_CKM.1
Cryptographic key
generation]
FCS_CKM.4
Cryptographic key
destruction
FCS_CKM.1
FCS_CKM.4
123
FCS_CKM.2/Export from the PP is now iterated in this ST to
FCS_CKM.2/Secret_Symmetric_Key_Export, FCS_CKM.2/Secret_Key_Export and
FCS_CKM.2/Cloning_Key_Export.
124
All iterations of FCS_COP should be mapped with the exception of FCS_COP.1/digest which does not
use or consume cryptographic keys in.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 100 of 111
Security Functional Requirement Dependencies Rationale
FCS_CKM.2/Secret_Symmetric_Key_Import
FCS_CKM.2/Private_Key_Import
FCS_CKM.2/Cloning_Import
[FDP_ITC.1 Import of
user data without
security attributes or
FDP_ITC.2 Import of
user data with security
attributes, or
FCS_CKM.1
Cryptographic key
generation]
FCS_CKM.4
Cryptographic key
destruction
FDP_ITC.2
FCS_CKM.1
FCS_CKM.4
FCS_CKM.4
[FDP_ITC.1 Import of
user data without
security attributes, or
FDP_ITC.2 Import of
user data with security
attributes, or
FCS_CKM.1
Cryptographic key
generation]
FDP_ITC.2
FCS_CKM.1
FCS_COP.1/Sign
FCS_COP.1/Digest
FCS_COP.1/RSA_Enc_Dec
FCS_COP.1/TDES_Enc_Dec
FCS_COP.1/AES_Enc_Dec
FCS_COP.1/Key_Derive
FCS_COP.1/MAC
[FDP_ITC.1 Import of
user data without
security attributes, or
FDP_ITC.2 Import of
user data with security
attributes, or
FCS_CKM.1
Cryptographic key
generation]
FCS_CKM.4
Cryptographic key
destruction
FDP_ITC.2
FCS_CKM.1
FCS_CKM.4
FCS_RNG.1 No dependencies n/a
FDP_ACC.2/Oper
FDP_ACF.1 Security
attribute based access
control
FDP_ACF.1/Oper
FDP_ACC.2/Mode_Trans
FDP_ACF.1 Security
attribute based access
control
FDP_ACF.1/Mode_Trans
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 101 of 111
Security Functional Requirement Dependencies Rationale
FDP_ACC.2/Key_Man
FDP_ACF.1 Security
attribute based access
control
FDP_ACF.1/Key_Man
FDP_ACF.1/Key_Man
FDP_ACC.1 Subset
access control,
FMT_MSA.3 Static
attribute initialisation
FDP_ACC.1/KeyMan
FMT_MSA.3
FDP_ACF.1/Mode_Trans
FDP_ACC.1 Subset
access control,
FMT_MSA.3 Static
attribute initialisation
FDP_ACC.1/Mode_Trans
FMT_MSA.3
FDP_ACF.1/Oper
FDP_ACC.1 Subset
access control,
FMT_MSA.3 Static
attribute initialisation
FDP_ACC.1/Oper
FMT_MSA.3
FDP_ETC.2
[FDP_ACC.1 Subset
access control, or
FDP_IFC.1 Subset
information flow control]
FDP_ACC.2/Key_Man
FDP_ACC.2/Oper (hierarchical to
FDP_ACC.1)
FDP_ITC.2
[FDP_ACC.1 Subset
access control, or
FDP_IFC.1 Subset
information flow control]
[FTP_ITC.1 Inter-TSF
trusted channel, or
FTP_TRP.1 Trusted
path]
FPT_TDC.1 Inter-TSF
basic TSF data
consistency
FDP_ACC.2/Key_Man
FDP_ACC.2/Oper (hierarchical to
FDP_ACC.1)
FTP_ITC.1/Cloning
FPT_TDC.1
FDP_RIP.2 No dependencies n/a
FIA_AFL.1/CO
FIA_AFL.1/SO
FIA_AFL.1/User
FIA_UAU.1 Timing of
authentication
FIA_UAU.1
FIA_ATD.1 No dependencies n/a
FIA_UAU.1
FIA_UID.1 Timing of
identification
FIA_UID.1
FIA_UAU.6 No dependencies n/a
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 102 of 111
Security Functional Requirement Dependencies Rationale
FIA_UAU.7
FIA_UAU.1 Timing of
authentication
FIA_UAU.1
FIA_UID.1 No dependencies n/a
FIA_USB.1
FIA_ATD.1 User
attribute definition
FIA_ATD.1
FMT_MOF.1/CO
FMT_MOF.1/SO
FMT_SMF.1
Specification of
management functions,
FMT_SMR.1 Security
roles
FMT_SMR.2 (hierarchical to
FMT_SMR.1)
FMT_SMF.1
FMT_MSA.1/Key_Man_1
FMT_MSA.1/Key_Man_2
[FDP_ACC.1 Subset
access control, or
FDP_IFC.1 Subset
information flow control]
FMT_SMF.1
Specification of
Management Functions
FMT_SMR.1 Security
roles
FDP_ACC.2/Key_Man,
FDP_ACC.2/Oper (hierarchical to
FDP_ACC.1)
FMT_SMF.1
FMT_SMR.2 (hierarchical to
FMT_SMR.1)
FMT_MSA.2
[FDP_ACC.1 Subset
access control, or
FDP_IFC.1 Subset
information flow control]
FMT_MSA.1
Management of security
attributes
FMT_SMR.1 Security
roles
FDP_ACC.2 (all iterations,
hierarchical to FDP_ACC.1)
FMT_MSA.1/Key_Man_1,
FMT_MSA.1/Key_Man_2
FMT_SMR.2 (hierarchical to
FMT_SMR.1)
FMT_MSA.3
FMT_MSA.1
Management of security
attributes
FMT_SMR.1 Security
roles
FMT_MSA.1/Key_Man_1
FMT_MSA.1/Key_Man_2
FMT_SMR.2 (hierarchical to
FMT_SMR.1)
FMT_MTD.1/Admin
FMT_MTD.1/User
FMT_SMF.1
Specification of
Management Functions
FMT_SMR.1 Security
roles
FMT_SMR.2 (hierarchical to
FMT_SMR.1)
FMT_SMF.1
FMT_SMF.1 No dependencies n/a
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 103 of 111
Security Functional Requirement Dependencies Rationale
FMT_SMR.2
FIA_UID.1 Timing of
identification
FIA_UID.1
FPT_EMS.1 No dependencies n/a
FPT_FLS.1 No dependencies n/a
FPT_TDC.1 No dependencies n/a
FPT_TST.1 No dependencies n/a
FPT_TST.2
FPT_FLS.1 Failure with
preservation of secure
state
FPT_FLS.1
FTP_ITC.1/Cloning No dependencies n/a
Table 8-3 – Dependency Rationale for Security Functional Requirement
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 104 of 111
8.5 Mapping of IT Security Functions to IT Security Requirements and SFRs
IT Security
Function
TSS
Reference
CC Requirement
Title
CC Functional
Component
ST
Reference
Rationale
Cryptographic
Material
Management
7.3.8
Cryptographic key
generation
FCS_CKM.1 6.1.1.1
The security function satisfies the SFR by providing
mechanisms for the generation of RSA, DSA,
ECDSA, DH, ECDH, AES and TDES keys of the
specified lengths in accordance with the appropriate
standards.
Key Cloning
Key Wrap/Unwrap
7.3.18
7.3.8.3
Cryptographic key
distribution
FCS_CKM.2
6.1.1.2
6.1.1.3
6.1.1.4
6.1.1.5
6.1.1.6
0
The security function satisfies the SFR by providing
(i) a secure means to derive a key as part of the
cloning protocol to encrypt the backed up keys
when transferred from the TOE to another distinct
TOE or Trusted IT Product or (ii) using RSA, or
wrapped according to PKCS #8 using AES or TDES
Cryptographic
Material
Management
7.3.8
Cryptographic key
destruction
FCS_CKM.4 6.1.1.8
The security function satisfies the SFR by providing
mechanisms that destroys keys in accordance with
Endorsed methods
Cryptography 7.3.9
Cryptographic
operation
FCS_COP.1
6.1.1.10
6.1.1.11
6.1.1.12
6.1.1.13
6.1.1.14
6.1.1.15
6.1.1.16
The security function satisfies the SFR by providing
mechanisms that implement the specified set of
cryptographic algorithms in accordance with the
appropriate standards.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 105 of 111
IT Security
Function
TSS
Reference
CC Requirement
Title
CC Functional
Component
ST
Reference
Rationale
Cryptography 7.3.9
Random Number
Generation
FCS_RNG.1 6.1.1.17
The security function satisfies the SFR by providing
a Random Number Generator that can be tested to
demonstrate sufficient entropy.
Access Control 7.3.4
Complete access
control
FDP_ACC.2
6.1.3.1
6.1.3.3
6.1.3.5
The security function satisfies the SFR by enforcing
the Token Access Control (TAC) policy on subjects
(sessions), objects and a set of controlled
operations.
Access Control 7.3.4
Security attribute
based access control
FDP_ACF.1
6.1.3.2
6.1.3.4
6.1.3.6
The security function satisfies the SFR by enforcing
the access control policies based on the specified
sets of subject and object attributes.
Key Export and
Import Protection
7.3.7
Export of user data
with security
attributes
FDP_ETC.2 6.1.3.8
The security function satisfies the SFR by enforcing
the TAC when data is exported through a Wrap
operation. Objects are exported without security-
related attributes.
Key Export and
Import Protection
7.3.7
Imported user data
with security
attributes
FDP_ITC.2 6.1.3.7
The security function satisfies the SFR through two
routes:
(1) by enforcing the TAC when data is
imported through an Unwrap operation.
The TSF ignores any security-related
attributes that may have been associated
with the imported object and sets the
object’s attributes to the appropriate values
for its type and, in particular, the
CKA_SENSITIVE attribute is always set.
(2) ensuring consistent direct transfer using
cloning including direct transfer of all key
attributes.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 106 of 111
IT Security
Function
TSS
Reference
CC Requirement
Title
CC Functional
Component
ST
Reference
Rationale
Object Reuse 7.3.5
Full residual
information
protection
FDP_RIP.2 6.1.3.9
The security function satisfies the SFR by ensuring
that the information content of resources is made
unavailable when the resource is re-allocated.
User Identification
and Authentication
7.3.1
Authentication failure
handling
FIA_AFL.1
6.1.2.7
6.1.2.8
6.1.2.9
The security function satisfies the SFR by detecting
when the maximum number of login failures occur
(3 for SO, set in the TPV for Token User; 3-10 for
the CO, as configured by the SO) and performing
on of the following:
Zeroise the device in the case of SO authentication
failure and if configured by the SO, CO
authentication failure.
Locking out the CO user
Remove the user and zeroise the user’s memory
space, if a Token User authentication failure.
User Account Data 7.3.3
User attribute
definition
FIA_ATD.1 6.1.2.1
The security function satisfies the SFR by
maintaining the required list of security attributes
within the UAV for each Token User.
User Identification
and Authentication
7.3.1
Timing of
authentication
FIA_UAU.1 6.1.2.3
The security function satisfies the SFR by allowing
a user to perform a specified set of actions before
authentication and by requiring the user to be
successfully authenticated before allowing the user
to perform any other actions on the module.
User Identification
and Authentication
7.3.1 Re-authenticating FIA_UAU.6 6.1.2.4
The security function satisfies the SFR by only
allowing a user to authenticate against a single role,
enforcing re-authentication via a trusted IT device
(PED) and credentials when needing to assume a
new role, and powering up in an unauthenticated
state.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 107 of 111
IT Security
Function
TSS
Reference
CC Requirement
Title
CC Functional
Component
ST
Reference
Rationale
User Identification
and Authentication
7.3.1
Protected
authentication
feedback
FIA_UAU.7 6.1.2.5
The security function satisfies the SFR by not
outputting sensitive data to the trusted PIN entry
device.
User Identification
and Authentication
7.3.1
Timing of
identification
FIA_UID. 1 6.1.2.2
The security function satisfies the SFR by allowing
a user to perform a specified set of actions before
identification and by requiring the user to be
successfully identified before allowing the user to
perform any other actions on the module.
User Identification
and Authentication
7.3.1 User subject binding FIA_USB.1 6.1.2.6
The security function satisfies the SFR by
specifying that the user identity be bound to the
subject (session) acting on behalf of the user by
including the UAV data within the session state.
Security Function
Management
7.3.12
Management of
security functions
behaviour
FMT_MOF.1 6.1.4.3
The security function satisfies the SFR by restricting
the ability to perform the specified security
management operations to the CO and SO roles.
Security Data
Management
7.3.13
Management of
security attributes
FMT_MSA.1
6.1.4.7
6.1.4.8
The security function satisfies the SFR by enforcing
the TAC Policy to restrict the ability to manipulate
user and object security attributes as specified.
Security Data
Management
7.3.13
Secure security
attributes
FMT_MSA.2 6.1.4.9
The security function satisfies the SFR by ensuring
that only secure values are accepted for security
attributes.
Security Data
Management
7.3.13
Static attribute
initialisation
FMT_MSA.3 6.1.4.10
The security function satisfies the SFR by requiring
restrictive values for security attributes that cannot
be changed based on the capability and policy
settings.
Security Data
Management
7.3.13
Management of TSF
data
FMT_MTD.1 6.1.4.5
The security function satisfies the SFR by enforcing
the TAC Policy to restrict the ability to manipulate
the policy settings to the SO or corresponding user.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 108 of 111
IT Security
Function
TSS
Reference
CC Requirement
Title
CC Functional
Component
ST
Reference
Rationale
Specification of
Security
Management
Functions
7.3.11
Specification of
management
functions
FMT_SMF.1 6.1.4.1
The security function satisfies the SFR by
specifying the security management functions that
may be performed.
TOE Roles 7.1.3
Restrictions on
security roles
FMT_SMR.2 6.1.4.2
The security function satisfies the SFR by
specifying the security roles that are implemented
by the TOE – Security Officer, Crypto Officer and
Crypto User.
Physical Self-
Protection
7.3.16 TOE Emanation FPT_EMS.1 6.1.5.3
The security function satisfies the SFR by not
allowing emissions beyond levels specified during
conducted and radiated emissions testing.
Preservation of
Secure State
7.3.14.4
Failure with
preservation of
secure state
FPT_FLS.1 6.1.5.2
The security function satisfies the SFR by
preserving the module in a secure state when the
specified failure conditions occur.
Backup and
Recovery
7.3.18
Inter-TSF
confidentiality during
transmission
FTP_ITC.1/Clon
ing
6.1.1.9
The security function satisfies the SFR by
encrypting the transmitted data according to the
cloning protocol.
Key Storage and
Access Protection
7.3.8.1
Inter-TSF basic TSF
data consistency
FPT_TDC.1 6.1.5.1
The security function satisfies the SFR by ensuring
any externally-set attributes of imported keys are
ignored by the module and values are set according
to the values required by the Access Control Policy.
Key Cloning 7.3.18
Inter-TSF basic TSF
data consistency
FPT_TDC.1 6.1.5.1
The security function satisfies the SFR by
encrypting objects transferred between HSM
modules
Key Wrap/Unwrap 7.3.8.3
Inter-TSF basic TSF
data consistency
FPT_TDC.1 6.1.5.1
The security function satisfies the SFR by validating
keys and key components imported and exported
through the wrapping/unwrapping operation and
protecting them from modification through the use
of RSA or symmetric encryption.
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 109 of 111
IT Security
Function
TSS
Reference
CC Requirement
Title
CC Functional
Component
ST
Reference
Rationale
Self-Tests 7.3.14.2 TSF testing FPT_TST.1 6.1.5.4
The security function satisfies the SFR by providing
a suite of self-tests to verify the correct operation of
the security functions on start-up.
Memory and
Firmware Integrity
Check
Self-Tests
7.3.14.1
7.3.14.2
TSF self-testing FPT_TST.2 6.1.5.5
The security function satisfies the SFR by
implementing start-up and/or conditional known-
answer tests, random number tests, pair-wise
consistency tests and firmware integrity tests.
Table 8-4 – Mapping of IT Security Functions to IT Security Requirements and SFRs
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 110 of 111
APPENDIX A – REFERENCES
ID Document Number Revision Author Title
[1] ISO/IEC 15408-1 V3.1R4 N/A Common Criteria for Information
Technology Security Evaluation – Part 1:
Introduction and General Model
[2] ISO/IEC 15408-2 V3.1 R4 N/A Common Criteria for Information
Technology Security Evaluation – Part 2:
Security Functional Requirements
[3] ISO/IEC 15408-3 V3.1R4 N/A Common Criteria for Information
Technology Security Evaluation – Part 3:
Security Assurance Requirements
[4] FIPS 140-2 December
2002
NIST Security Requirements for Cryptographic
Modules
[5] CR-3854 1 SafeNet, Inc. Overview of Documentation Required to
Support Luna® PCI-E in Luna SA v5.2.3
Common Criteria Evaluation
[6] CR-3416 11 SafeNet, Inc. This document defines the logical
interface specification for the Luna PCI-
E in Luna SA v5.2.3 Cryptographic
Module.
[7] AIS20 Version 2.1,
2011-12-02
BSI Anwendungshinweise und
Interpretationen zum Schema (AIS), AIS
20, Funktionalitätsklassen und
Evaluationsmethodologie für
deterministischeZufallszahlengeneratoren
[8] AIS31 Version 2.1,
2011-12-02
BSI Anwendungshinweise und
Interpretationen zum Schema (AIS), AIS
31, Funktionalitätsklassen und
Evaluationsmethodologie für
physikalische Zufallszahlengeneratoren
[9] BSI-CC-PP-00078 V2.0.2, 2012-
12-06
BSI Protection Profile – Cryptographic
Modules, Security Level “Enhanced
Basic”
[10] BSI-CC-PP-00079 V2.0.2, 2012-
12-19
BSI Protection Profile – Cryptographic
Modules, Security Level “Standard”
[11] FIPS PUB 186-3 3, Issued June
2009
NIST Digital Signature Standard (DSS)
[12] ANSI X9.31 Sept 2008 ANSI Digital Signatures Using Reversible Public
Key Cryptography for the Financial
Services Industry (rDSA).
LUNA® PCI-E Cryptographic Module - Security Target
Revision 18. Copyright © 2013 -2017 SafeNet, Inc. All rights reserved.
Page 111 of 111
ID Document Number Revision Author Title
[13] NIST SP 800-67 January 2012 NIST Recommendation for the Triple Data
Encryption Algorithm (TDEA) Block
Cipher.
[14] NIST SP 800-57 July 2012,
Revision 3.
NIST Recommendations for Key Management
– Part 1: General.
[15] FIPS PUB 197 Nov, 2001 NIST Advanced Encryption Standard (AES)
[16] ANSI X9.62 November
2005
ANSI The Elliptic Curve Digital Signature
Algorithm (ECDSA)
[17] NIST SP-800-56A May 2013 NIST Recommendation for Pair-Wise Key
Establishment Schemes Using Discrete
Logarithm Cryptography.
[18] PKCS #1 V2.1 RSA Laboratories PKCS #1: RSA Cryptography Standard
[20] PKCS #8 V1.2 RSA Laboratories PKCS #8: Private-Key Information Syntax
Specification.
[21] PKCS #11 Version 2.20,
June 2004
RSA Laboratories PKCS #11: Cryptographic Token Interface
Standard
[22] CWA 14167-2 Version: 0.28,
October 2003
CEN/ISSS Cryptographic Module for CSP Signing
Operations with Backup – Protection
Profile
[23] FIPS PUB 180-4 March 2012 NIST Secure Hash Standard (SHS)
[24] CR-4119 2.0, May 30th
2017
SafeNet, Inc Luna PCI-E Cryptographic Module,
Common Criteria User Guidance.
[25] SP 800-108 October 2009 NIST Recommendation for Key Derivation
Using Pseudorandom Functions.
[26] SP 800-38D November
2007
NIST Recommendation for Block Cipher Modes
of Operation: Galois/Counter Mode
(GCM) and GMAC.
[27] SP 800-38B May 2005 NIST Recommendation for Block Cipher Modes
of Operation: The CMAC Mode for
Authentication.
[28] FIPS PUB 113 May 1985 NIST Computer Data Authentication
[29] FIPS PUB 198-1 July 2008 NIST The Keyed-Hash Message Authentication
Code (HMAC)