Security Target Junos OS 18.1R3 for MX240, MX480, MX960,
MX2008, MX2010, MX2020, EX9204, EX9208 and EX9214
Juniper Networks
Version 1.4
February 7, 2019
Prepared for:
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
www.juniper.net
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 2 of 50
Abstract
This document provides the basis for an evaluation of a specific Target of Evaluation (TOE), Junos OS
18.1R3 for MX series and EX9200 series. This Security Target (ST) is conformant to the requirements
of Collaborative Protection Profile for Network Devices ([NDcPP]) v2.0E.
References
[CC1] Common Criteria for Information Technology Security Evaluation, Part 1: Introduction
and general model, CCMB-2012-09-001, Version 3.1 Revision 4, September 2017
[CC2] Common Criteria for Information Technology Security Evaluation, Part 2: Security
Functional Components, CCMB-2012-09-002, Version 3.1 Revision 4, September 2017
[CC3] Common Criteria for Information Technology Security Evaluation, Part 3: Security
Assurance Components, CCMB-2012-09-003, Version 3.1 Revision 4, September 2017
[CEM Common Methodology for Information Technology Security Evaluation, Evaluation
Methodology, CCMB-2012-09-004, Version 3.1 Revision 4, September 2017
[CC_Add] CC and CEM Addenda, Exact Conformance, Selection-Based SFRs, Optional SFRs, CCDB-
2017-05-xxx, Version 0.5, May 2017
[NDcPP] Collaborative Protection Profile for Network Devices, version 2.0+Errata 20180314,
dated 14 March 2018
[SD] Supporting Document, Evaluation Activities for Network Device cPP, March 2018,
version 2.0+Errata 20180314
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 3 of 50
Table of Contents
1 Introduction ....................................................................................................................................5
1.1 ST reference............................................................................................................................5
1.2 TOE Reference.........................................................................................................................5
1.3 About this document ..............................................................................................................5
1.4 Document Conventions ..........................................................................................................5
1.5 TOE Overview..........................................................................................................................6
1.6 TOE Description.......................................................................................................................7
1.6.1 Overview .........................................................................................................................7
1.6.2 Physical boundary...........................................................................................................8
1.6.3 Logical Boundary...........................................................................................................10
1.6.4 Non-TOE hardware/software/firmware .......................................................................11
1.6.5 Summary of out scope items ........................................................................................11
2 Conformance Claim.......................................................................................................................12
2.1 CC Conformance Claim .........................................................................................................12
2.2 PP Conformance claim..........................................................................................................12
2.3 Technical Decisions...............................................................................................................12
3 Security Problem Definition..........................................................................................................17
3.1 Threats ..................................................................................................................................17
3.2 Assumptions..........................................................................................................................17
3.3 Organizational Security Policies............................................................................................17
4 Security Objectives........................................................................................................................18
4.1 Security Objectives for the TOE ............................................................................................18
4.2 Security Objectives for the Operational Environment..........................................................18
4.3 Security Objectives rationale ................................................................................................18
5 Security Functional Requirements................................................................................................19
5.1 Security Audit (FAU)..............................................................................................................19
5.1.1 Security Audit Data generation (FAU_GEN)..................................................................19
5.1.2 Security audit event storage (Extended – FAU_STG_EXT)............................................21
5.2 Cryptographic Support (FCS).................................................................................................22
5.2.1 Cryptographic Key Management (FCS_CKM)................................................................22
5.2.2 Cryptographic Operation (FCS_COP) ............................................................................22
5.2.3 Random Bit Generation (Extended – FCS_RBG_EXT)....................................................23
5.2.4 Cryptographic Protocols (Extended –FCS_SSHS_EXT SSH Protocol..............................24
5.3 Identification and Authentication (FIA) ................................................................................24
5.3.1 Authentication Failure Management (FIA_AFL) ...........................................................24
5.3.2 Password Management (Extended – FIA_PMG_EXT)...................................................25
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 4 of 50
5.3.3 User Identification and Authentication (Extended – FIA_UIA_EXT) .............................25
5.3.4 User authentication (FIA_UAU) (Extended – FIA_UAU_EXT)........................................25
5.3.5 Authentication using X.509 certificates (Extended – FIA_X509_EXT)...........................25
5.4 Security Management (FMT) ................................................................................................26
5.4.1 Management of functions in TSF (FMT_MOF)..............................................................26
5.4.2 Management of TSF Data (FMT_MTD) .........................................................................27
5.4.3 Specification of Management Functions (FMT_SMF)...................................................27
5.4.4 Security management roles (FMT_SMR) ......................................................................27
5.5 Protection of the TSF (FPT) ...................................................................................................28
5.5.1 Protection of TSF Data (Extended – FPT_SKP_EXT) ......................................................28
5.5.2 Protection of Administrator Passwords (Extended – FPT_APW_EXT)..........................28
5.5.3 TSF testing (Extended – FPT_TST_EXT).........................................................................28
5.5.4 Trusted Update (FPT_TUD_EXT) ...................................................................................28
5.5.5 Time stamps (Extended – FPT_STM_EXT)) ...................................................................29
5.6 TOE Access (FTA)...................................................................................................................29
5.6.1 TSF-initiated Session Locking (Extended – FTA_SSL_EXT) ............................................29
5.6.2 Session locking and termination (FTA_SSL) ..................................................................29
5.6.3 TOE access banners (FTA_TAB).....................................................................................29
5.7 Trusted path/channels (FTP).................................................................................................29
5.7.1 Trusted Channel (FTP_ITC)............................................................................................29
5.7.2 Trusted Path (FTP_TRP).................................................................................................30
6 Security Assurance Requirements ................................................................................................31
7 TOE Summary Specification..........................................................................................................32
7.1 Protected communications...................................................................................................32
7.1.1 Algorithms and zeroization...........................................................................................32
7.1.2 Random Bit Generation ................................................................................................34
7.1.3 SSH ................................................................................................................................35
7.2 Administrator Authentication...............................................................................................39
7.3 Correct Operation.................................................................................................................41
7.4 Trusted Update .....................................................................................................................42
7.5 Audit......................................................................................................................................43
7.6 Management.........................................................................................................................45
8 Rationales......................................................................................................................................47
8.1 SFR dependency analysis ......................................................................................................47
9 Glossary.........................................................................................................................................49
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 5 of 50
1 Introduction
1. This section identifies the Security Target (ST), Target of Evaluation (TOE), Security Target
organization, document conventions, and terminology. It also includes an overview of the
evaluated products.
1.1 ST reference
ST Title Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008,
MX2010, MX2020, EX9204, EX9208 and EX9214
ST Revision 1.4
ST Draft Date February 7, 2019
Author Juniper Networks, Inc.
cPP/EP Conformance [NDcPP]
1.2 TOE Reference
TOE Title Junos OS 18.1R3 for MX series and EX9200 series
TOE Firmware Version Junos OS 18.1R3-S3
1.3 About this document
2. This Security Target follows the following format:
Section Title Description
1 Introduction Provides an overview of the TOE and defines the hardware and
firmware that make up the TOE as well as the physical and logical
boundaries of the TOE
2 Conformance Claims Lists evaluation conformance to Common Criteria versions,
Protection Profiles, or Packages where applicable
3 Security Problem Definition Specifies the threats, assumptions and organizational security
policies that affect the TOE
4 Security Objectives Defines the security objectives for the TOE/operational
environment and provides a rationale to demonstrate that the
security objectives satisfy the threats
5 Security Functional
Requirements
Contains the functional requirements for this TOE
6 Security Assurance
Requirements
Contains the assurance requirements for this TOE
7 TOE Summary Specification Identifies the IT security functions provided by the TOE and also
identifies the assurance measures targeted to meet the
assurance requirements
8 Rationales Provides rationales for the information included in the document
9 Glossary Contains a glossary for the document
Table 1 Document Organization
1.4 Document Conventions
3. This document follows the same conventions as those applied in [NDcPP] in the completion of
operations on Security Functional Requirements, namely:
• Unaltered SFRs are stated in the form used in [CC2] or their extended component definition
(ECD);
• Refinement made in the : the refinement text is indicated with bold text and strikethroughs;
• Selection completed in the ST: the selection values are indicated with underlined text
e.g. “[selection: disclosure, modification, loss of use]” in [CC2] or an ECD might
become “disclosure” (completion;
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 6 of 50
• Assignment completed in the ST: indicated with italicized text;
• Assignment completed within a selection in the ST: the completed assignment text is
indicated with italicized and underlined text
e.g. “[selection: change_default, query, modify, delete, [assignment: other
operations]]” in [CC2] or an ECD might become “change_default, select_tag”
(completion of both selection and assignment);
• Iteration: indicated by adding a string starting with “/” (e.g. “FCS_COP.1/Hash”).
4. Operations performed in [NDcPP] are not marked in this Security Target.
1.5 TOE Overview
5. The Target of Evaluation (TOE) is Juniper Networks, Inc. Junos OS 18.1R3 executing on MX-Series
3D Universal Edge Routers and EX9200 Ethernet Switch. The supported chassis are:
• MX240
• MX480
• MX960
• MX2008
• MX2010
• MX2020
• EX9204
• EX9208
• EX9214
6. The supported Routing Engines employed by the MX-Series Router and EX9200-Series switches
are:
• MX-Series Routers
o RE1800 generation Routing Engines:
▪ RE-S-1800x4-YYG1
for MX240, MX480 and MX960
▪ RE-MX2000-1800X4 and REMX2K-1800-32G-S for MX2010 and MX2020
o Next Generation Routing Engines (RE-NG):
▪ RE-S-X6-64G for MX240, MX480 and MX960
▪ REMX2K-X8-64G for MX2008, MX2010 and MX2020
• EX9200-Series Ethernet Switches
o EX9200-RE (RE1800)
o EX9200-RE2 (RE-NG)
7. Each of the MX-Series/EX9200 appliances is a secure network device that protects itself largely
by offering only a minimal logical interface to the network and attached nodes. All MX-
Series/EX9200-Series appliances are powered by the Junos OS software, Junos OS 18.1R3, which
1
YY = 8, 16or 32 GB memory)
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 7 of 50
is a special purpose OS that provides no general purpose computing capability. Junos OS
provides both management and control functions as well as all IP routing.
8. The MX-Series/EX9200-Series appliances primarily support the definition of, and enforce,
information flow policies among network nodes. All information flow from one network node to
another passes through an instance of the TOE. Information flow is controlled on the basis of
network node addresses and protocol. In support of the information flow security functions, the
TOE ensures that security-relevant activity is audited, and provides the security tools to manage
all of the security functions.
1.6 TOE Description
1.6.1 Overview
9. Each Juniper Networks MX routing appliance is a complete routing system that supports a
variety of high-speed interfaces (only Ethernet is within scope of the evaluation) for
medium/large networks and network applications. Juniper Networks MX routers share common
Junos firmware, features, and technology for compatibility across platforms.
10. The portfolio of MX Series 3D Universal Edge Routers includes a wide range of physical and
virtual platforms that share a common architecture and feature set. This enables Juniper
customers to select the platform that best addresses their unique business goals and satisfies
their scale, density, resiliency, space, power, and value-added service requirements without
compromising on quality or features. The MX Series are modular, chassis-based routers, aimed
at supporting a wide range of cloud, campus, enterprise, data center, service provider, cable,
and mobile service core applications .
11. The EX9200-Series line of programmable, flexible and scalable modular Ethernet core switches
simplifies the deployment of cloud applications, virtualized servers and rich media collaboration
tools across campus and data center environments. The EX9200 Ethernet Switch enables
collaboration and provides simple and secure access to mission critical applications. In the data
center, the EX9200 simplifies network architectures and network operations to better align the
network with today’s dynamic business environments.
12. The appliances are physically self-contained, housing the software, firmware and hardware
necessary to perform all routing functions. The architecture components of the appliances are:
• Switch fabric – the switch fabric boards/modules provide a highly scalable, non-blocking,
centralized switch fabric matrix through which all network data passes.
• Routing Engine (Control Board) – the RE runs the Junos firmware and provides Layer 3
routing services and Layer 2 switching services. The RE also provides network management
for all operations necessary for the configuration and operation of the TOE and controls the
flow of information through the TOE, including support for appliance interface control and
control plane functions such as chassis component, system management and user access to
the appliance.
• Layer 2 switching services (EX9200-Series only), Layer 3 switching/routing services and
network management for all operations necessary for the configuration and operation of the
TOE and controls the flow of information through the TOE.
• The Packet Forwarding Engine (PFE) – provides all operations necessary for transit packet
forwarding. This is provided by the Modular Port Concentrators on the MX-Series appliances
and Line Cards on the EX9200-Series appliances:
o MPCs provide comprehensive routing, switching, inline services, subscriber
management and advanced hierarchical quality of service (HQoS) to address a wide
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 8 of 50
set of network and service applications. Some MPCs provide network connectivity
directly; other MPCs host Modular Interface Cards (MICs) that allow mix-and-match
interfaces.
o The EX9200-Series line cards support an extensive set of Layer 2 and Layer 3 services
that can be deployed in any combination of L2- L3 applications.
• Power – power supply bays to provide complete flexibility for provisioning and redundancy.
The power supplies connect to the midplane, which distributes the different output voltages
produced by the power supplies to the appliance components, depending on their voltage
requirements.
13. The Routing Engine and Packet Forwarding Engine perform their primary tasks independently,
while constantly communicating through a high-speed internal link. This arrangement provides
streamlined forwarding and routing control and the capability to run Internet-scale networks at
high speeds.
14. The appliances support numerous routing and switching standards for flexibility and scalability.
15. The functions of the appliances can all be managed through the Junos firmware, either from a
connected terminal console or via a network connection. Network management is secured using
the SSH protocol. All management, whether from a user connecting to a terminal or from the
network, requires successful authentication. In the evaluated deployment the TOE is managed
and configured via Command Line Interface, either via a directly connected console or over the
network secured using the SSH protocol.
1.6.2 Physical boundary
16. The TOE is the Junos OS 18.1R3 firmware running on the appliance chassis listed in Table 2
Hence the TOE is contained within the physical boundary of the specified appliance chassis, as
shown in Figure 1 and Figure 2 below.
17. The physical boundary of the TOE is the entire chassis of the appliance (defined in Table 2
below).
Figure 1 TOE Boundary
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 9 of 50
Figure 2 TOE Boundary with Next Generation RE (RE-NG)
18. The TOE interfaces are comprised of the following:
i. Network interfaces which pass traffic
ii. Management interface through which handle administrative actions.
Chassis
Model
Routing Engine Network Ports Firmware
MX240 RE-S-1800X4-YYG
(YY = 8, 16 or 32 GB
memory)
or
RE-S-X6-64G
3 x (MPCs and DPCs)
Junos OS
18.1R3
MX480 6 x (MPCs and DPCs)
MX960 12 x (MPCs and DPCs)
MX2008 REMX2008-X8-64G 10 x MPCs
MX2010 RE-MX2000-1800X4 or
REMX2K-1800-32G-S or
REMX2K-X8-64G
10 x MPCs
MX2020 20 x MPCs
EX9204
EX9208
EX9214
EX9200-RE
or
EX9200-RE2
EX9200-2C-8XS
EX9200-4QS
EX9200-6QS
EX9200-MPC
EX9200-12QS
EX9200-32XS
EX9200—40T
EX9200-40F
EX9200-40F-M
EX9200-40XS
Table 2 TOE Chassis Details
19. Separate jinstall images are provided for MX-Series and EX9200-Series chassis, for each RE1800
and RE-NG Routing Engine, namely:
• MX with RE1800 (RE-S-1800X4-YYG, RE-MX2000-1800X4 and REMX2K-1800-32G-S):
o junos-install-mx-x86-64-18.1R3.3.tgz
• MX with RE-NG (RE-S-X6-64G, REMX2008-X8-64G and REMX2K-x8-64G):
o junos-vmhost-install-mx-x86-64-18.1R3.3.tgz
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 10 of 50
• EX9200 with RE 1800 (EX9200-RE):
o junos-install-ex92xx-x86-64-18.1R3-S3.4.tgz
• EX9200 with RE-NG (EX9200-RE2):
o junos-vmhost-install-ex92xx-x86-64-18.1R3-S3.4.tgz
20. The MX-series and EX9200-series appliances support numerous combinations and permutations
of line cards in the network ports. The interface options supported for each appliance are
described in the following reference documents:
• MX240 3D Universal Edge Router Hardware Guide
• MX480 3D Universal Edge Router Hardware Guide
• MX960 3D Universal Edge Router Hardware Guide
• MX2008 3D Universal Edge Router Hardware Guide
• MX2010 3D Universal Edge Router Hardware Guide
• MX2020 3D Universal Edge Router Hardware Guide
• EX9204 Switch Hardware Guide
• EX9208 Switch Hardware Guide
• EX9214 Switch Hardware Guide
21. The firmware version reflects the detail reported for the components of the Junos OS when the
“show version” command is executed on the appliance.
22. The guidance documents included as part of the TOE are:
[ECG] Junos OS Common Criteria NDcPP Evaluation Configuration Guide for MX-Series
Devices and EX9200 Devices Release 18.1R3
1.6.3 Logical Boundary
23. The logical boundary of the TOE includes the following security functionality:
Security Functionality Description
Protected Communications The TOE provides an SSH server to support protected
communications for administrators to establish secure sessions
and to connect to external syslog servers.
The TOE requires that applications exchanging information with
it are successfully authenticated prior to any exchange (i.e.
applications connecting over SSH).
The TOE includes cryptographic modules that provide the
underlying cryptographic services, including key management
and protection of stored keys, algorithms, random bit generation
and crypto-administration. The cryptographic modules provide
confidentiality and integrity services for authentication and for
protecting communications with connecting applications.
Administrator Authentication Administrative users must provide unique identification and
authentication data before any administrative access to the
system is granted. Authentication data entered and stored on
the TOE is protected. The TOE can be configured to terminate
interactive user sessions and to present an access banner with
warning messages prior to authentication.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 11 of 50
Security Functionality Description
Correct Operation The TOE provides for both cryptographic and non-cryptographic
self-tests, and is capable of automated recovery from failure
states.
Trusted Update The administrator can initiate update of the TOE firmware. The
integrity of any firmware updates is verified prior to installation
of the updated firmware.
Audit Junos auditable events are stored in the syslog files on the
appliance, and can be sent to an external log server (via Netconf
over SSH). Auditable events include start-up and shutdown of the
audit functions, authentication events, as well as the events
listed in Table 4. Audit records include the date and time, event
category, event type, username, and the outcome of the event
(success or failure). Local syslog storage limits are configurable
and are monitored. In the event of storage limits being reached
the oldest logs will be overwritten.
Management The TOE provides a Security Administrator role that is
responsible for:
• the configuration and maintenance of cryptographic
elements related to the establishment of secure
connections to and from the evaluated product
• the regular review of all audit data;
• initiation of trusted update function;
• all administrative tasks (e.g., creating the security
policy).
The devices are managed through a Command Line Interface
(CLI). The CLI is accessible through local (serial) console
connection or remote administrative (SSH) session.
1.6.4 Non-TOE hardware/software/firmware
24. The TOE relies on the provision of the following items in the network environment:
• Syslog server supporting SSHv2 connections to send audit logs;
• SSHv2 client for remote administration;
• Serial connection client for local administration.
1.6.5 Summary of out scope items
• Use of telnet, since it violates the Trusted Path requirement set (see Section 5.7.2)
• Use of FTP, since it violates the Trusted Path requirement set (see Section 5.7.2)
• Use of SNMP, since it violates the Trusted Path requirement set (see Section 5.7.2)
• Use of SSL, including management via J-Web, JUNOScript and JUNOScope, since it violates
the Trusted Path requirement set (see Section 5.7.2)
• Use of CLI account super-user and shell root account.
• Multi-Service MPCs (which provide IPsec and VPN functionality for these platforms)
• Routing, switching, inline services, subscriber management and advanced hierarchical
quality of service (HQoS) functionality of the PFE/MPCs is not evaluated
• Network and Security Manager (NSM) and Junos Space; CLI is included
• Network Time Protocol (NTP)
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 12 of 50
2 Conformance Claim
2.1 CC Conformance Claim
25. This Security Target conforms to the requirements of Common Criteria v3.1, Revision 5 and is
Part 2 extended and Part 3 conformant.
2.2 PP Conformance claim
26. This Security Target claims Exact Conformance to the Collaborative Protection Profile for
Network Devices, version 2.0+Errata 20180314, dated 14 March 2018. Exact conformance is
defined in [NDcPP] section 2 and in [CC_Add].
27. The Security Problem definition in this Security Target is consistent with the security problem
definitions detailed in the collaborative Protection Profile to which this ST claims conformance,
namely:
• [NDcPP] Section 4.
28. The statement of the Security Problem Definition in this ST is identical to the set of the threats,
organizational security policies and assumptions from the collaborative Protection Profile.
Hence, this SPD statement is considered to be conformant to the collaborative Protection
Profiles and Extended Packages claimed.
29. Similarly, the statement of security objectives in this ST is consistent with the statement of
security objectives detailed in the collaborative Protection Profile and Extended Package to
which this ST claims conformance, namely:
• The prose in [NDcPP] Section 5.
30. Again, the statement of the Security Objectives in this ST is identical to the set of the security
objectives from the collaborative Protection Profile. Hence, the statement of security objectives
in this ST is considered to be conformant to the collaborative Protection Profile claimed.
31. The statement of requirements in this ST is consistent with the statement of requirements
(functional and assurance) detailed in
• [NDcPP] Sections 6 & 7.
32. All Security Functional Requirements specified in [NDcPP] Section 6, together with the relevant
selection-based requirements from Appendix B are included in this ST.
33. This statement of SFRs is augmented with SFRs specified in [NDcPP] Appendix A (Optional
requirements).
34. All extended requirements in this ST are taken from [NDcPP] Appendix C.
35. The Security Assurance Requirements specified in this ST are the superset of those defined in:
• [NDcPP] Section 7.
36. Hence, the statement of security requirements in this ST is considered to be conformant to the
collaborative Protection Profile claimed.
37. The distributed TOE deployment aspects described in [NDcPP] are not applicable as this TOE is
satisfied by each model of the TOE in isolation.
2.3 Technical Decisions
38. In line with Labgram #105, this section identifies all NIAP Technical Decisions that are applicable
to this TOE:
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 13 of 50
TD REFERENCE Applic
able
Exclusion Rationale
TD0343: NIT Technical
Decision for Updating
FCS_IPSEC_EXT.1.14 Tests
ND SD V2.0,
FCS_IPSEC_EXT.1.14,
CPP_FW_V2.0E,
CPP_ND_V2.0E
No This TD is associated with
FCS_IPSEC_EXT.1. The TOE
does not include
FCS_IPSEC_EXT.1
functionality.
TD0342: NIT Technical
Decision for TLS and DTLS
Server Tests
ND SD V2.0,
FCS_DTLSS_EXT.1,
FCS_DTLSS_EXT.2,
FCS_TLSS_EXT.1,
FCS_TLSS_EXT.2,
CPP_ND_V2.0E
No This TD is associated with
FCS_[D]TLSS_EXT.[1|2]. The
TOE does not include
FCS_[D]TLSS_EXT.[1|2]
functionality.
TD0341: NIT Technical
Decision for TLS wildcard
checking
ND SD V2.0,
FCS_TLSC_EXT.1.2,
FCS_TLSC_EXT.2.2,
FCS_DTLSC_EXT.1.2,
FCS_DTLSC_EXT.2.2,
CPP_ND_V2.0E
No This TD is associated with
FCS_[D]TLSC_EXT.[1|2]. The
TOE does not include
FCS_[D]TLSC_EXT.[1|2]
functionality.
TD0340: NIT Technical
Decision for Handling of the
basicConstraints extension in
CA and leaf certificates
FIA_X509_EXT.1.1,
CPP_FW_V2.0E,
CPP_ND_V2.0E
Yes
TD0339: NIT Technical
Decision for Making
password-based
authentication optional in
FCS_SSHS_EXT.1.2
ND SD V2.0,
FCS_SSHS_EXT.1.2,
CPP_FW_V2.0E,
CPP_ND_V2.0E
Yes
TD0338: NIT Technical
Decision for Access Banner
Verification
ND SD V2.0, FTA_TAB.1,
CPP_ND_V2.0E
Yes
TD0337: NIT Technical
Decision for Selections in
FCS_SSH*_EXT.1.6
ND SD V2.0,
FCS_SSHC_EXT.1,
FCS_SSHS_EXT.1,
CPP_FW_V2.0E,
CPP_ND_V2.0E
Yes
TD0336: NIT Technical
Decision for Audit
requirements for
FCS_SSH*_EXT.1.8
ND SD V2.0,
FCS_SSHC_EXT.1.8,
FCS_SSHS_EXT.1.8,
CPP_ND_V2.0E
Yes
TD0335: NIT Technical
Decision for FCS_DTLS
Mandatory Cipher Suites
FCS_DTLSC_EXT.1.1,
FCS_DTLSC_EXT.2.1,
FCS_DTLSS_EXT.1.1,
FCS_DTLSS_EXT.2.1,
FCS_TLSC_EXT.1.1,
FCS_TLSC_EXT.2.1,
FCS_TLSS_EXT.1.1,
FCS_TLSS_EXT.2.1,
CPP_FW_V2.0E,
CPP_ND_V2.0E
No This TD is associated with
FCS_[D]TLS[C|S]_EXT.[1|2].
The TOE does not include
FCS_[D]TLS[C|S]_EXT.[1|2]
functionality.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 14 of 50
TD REFERENCE Applic
able
Exclusion Rationale
TD0334: NIT Technical
Decision for Testing SSH
when password-based
authentication is not
supported
ND SD V2.0,
FCS_SSHC_EXT.1.9,
CPP_ND_V2.0E
No This TD is associated with
FCS_SSHC_EXT.1. The TOE
does not include
FCS_SSHC_EXT.1
functionality.
TD0333: NIT Technical
Decision for Applicability of
FIA_X509_EXT.3
ND SD V2.0,
FIA_X509_EXT,
CPP_FW_V2.0E,
CPP_ND_V2.0E
Yes
TD0324: NIT Technical
Decision for Correction of
section numbers in SD Table 1
Table 1, CPP_ND_V2.0E Yes
TD0323: NIT Technical
Decision for DTLS server
testing - Empty Certificate
Authorities list
ND SD V2.0,
FCS_DTLSS_EXT.2.7,
FCS_DTLSS_EXT.2.8,
CPP_ND_V2.0E
No This TD is associated with
FCS_DTLSS_EXT.2. The TOE
does not include
FCS_DTLSS_EXT.2
functionality.
TD0322: NIT Technical
Decision for TLS server testing
- Empty Certificate
Authorities list
ND SD V.1.0, ND SD
V2.0, FCS_TLSS_EXT.2.4,
FCS_TLSS_EXT.2.5,
CPP_ND_V2.0E
No This TD is associated with
FCS_TLSS_EXT.2. The TOE
does not include
FCS_TLSS_EXT.2
functionality.
TD0321: Protection of NTP
communications
FTP_ITC.1,
FPT_STM_EXT.1,
CPP_FW_V2.0E,
CPP_ND_V2.0E
Yes
TD0291: NIT Technical
Decision for DH14 and
FCS_CKM.1
FCS_CKM.1
CPP_FW_V1.0,
CPP_FW_v2.0,
CPP_FW_V2.0E,
CPP_ND_V1.0,
CPP_ND_V2.0,
CPP_ND_V2.0E,
ND SD V.1.0, ND SD V2.0
Yes
TD0290: NIT Technical
Decision for physical
interruption of trusted
path/channel
FTP_ITC.1, FTP_TRP.1,
FPT_ITT.1
CPP_ND_V1.0,
CPP_ND_V2.0,
CPP_ND_V2.0E,
ND SD V.1.0, ND SD V2.0
Yes
TD0289: NIT Technical
Decision for
FCS_TLSC_EXT.x.1 Test 5e
CPP_ND_V1.0,
CPP_ND_V2.0,
CPP_ND_V2.0E
FCS_TLSC_EXT.1.1,
FCS_TLSC_EXT.2.1,
FCS_DTLSC_EXT.1.1
(only ND SD V2.0) ,
FCS_DTLSC_EXT.2.1
(only ND SD V2.0)
No This TD is associated with
FCS_[D]TLSC_EXT.x. The TOE
does not include
FCS_[D]TLSC_EXT.x
functionality.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 15 of 50
TD REFERENCE Applic
able
Exclusion Rationale
TD0281 : NIT Technical
Decision for Testing both
thresholds for SSH rekey
FCS_SSHC_EXT.1.8,
FCS_SSHS_EXT.1.8,
CPP_ND_V1.0,
CPP_ND_V2.0,
CPP_ND_V2.0E
ND SD V1.0, ND SD V2.0
Yes
TD0262 : NIT Technical
Decision for TLS server testing
- Empty Certificate
Authorities list
CPP_ND_V1.0,
CPP_ND_V2.0
ND SD V.1.0, ND SD
V2.0, FCS_TLSS_EXT.2.4,
FCS_TLSS_EXT.2.5
No This TD has been archived.
TD0260: NIT Technical
Decision for Typo in
FCS_SSHS_EXT.1.4
CPP_FW_v2.0,
CPP_FW_V2.0E,
CPP_ND_V2.0,
CPP_ND_V2.0E
FCS_SSHS_EXT.1.4
Yes
TD0259: NIT Technical
Decision for Support for X509
ssh rsa authentication IAW
RFC 6187
CPP_FW_v2.0,
CPP_FW_V2.0E,
CPP_ND_V2.0,
CPP_ND_V2.0E
FCS_SSHC_EXT.1.5/FCS_
SSHS_EXT.1.5
Yes
TD0257: NIT Technical
Decision for Updating
FCS_DTLSC_EXT.x.2/FCS_TLSC
_EXT.x.2 Tests 1-4
ND SD V1.0, ND SD V2.0,
FCS_DTLSC_EXT.1.2/FCS
_DTLSC_EXT.2.2 Tests 1-
4 (ND SD V2.0),
FCS_TLSC_EXT.1.2/FCS_
TLSC_EXT.2.2, Tests 1-4
(ND SD V1.0, ND SD
V2.0)
CPP_ND_V1.0,
CPP_ND_V2.0,
CPP_ND_V2.0E
No This TD is associated with
FCS_[D]TLSC_EXT.2. The TOE
does not include
FCS_[D]TLSC_EXT.2
functionality.
TD0256: NIT Technical
Decision for Handling of TLS
connections with and without
mutual authentication
ND SD V1.0, ND SD V2.0,
FCS_DTLSC_EXT.2.5 (ND
SD V2.0),
FCS_TLSC_EXT.2 (ND SD
V1.0, ND SD V2.0)
CPP_ND_V1.0,
CPP_ND_V2.0,
CPP_ND_V2.0E
No This TD is associated with
FCS_[D]TLSC_EXT.2. The TOE
does not include
FCS_[D]TLSC_EXT.2
functionality.
TD0228: NIT Technical
Decision for CA certificates -
basicConstraints validation
ND SD V1.0, ND SD V2.0,
FIA_X509_EXT.1.2
CPP_FW_V1.0,
CPP_ND_V1.0,
CPP_ND_V2.0,
CPP_ND_V2.0E
Yes
Table 3 Applicable NIAP Technical Decisions
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 16 of 50
39. All other NIAP Technical Decisions fall into one of the following categories and hence are not
applicable to this TOE:
• Relates to earlier version of cPPs/EPs claimed for this TOE. This TD has been superseded
by cPPs/EPs (and associated SDs) released after this TD
• Relates to cPP/EP that is not claimed for this TOE
• This TD relates to a configuration not supported by this TOE
• Relates to (selection-based) claims not included in the scope of this TOE
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 17 of 50
3 Security Problem Definition
40. As this TOE is not distributed, none of the threats/assumptions/OSPs relating to distributed TOEs
are specified for this TOE.
3.1 Threats
41. The following threats for this TOE are as defined in [NDcPP] Section 4.1, namely:
• T.UNAUTHORIZED_ADMINISTRATOR_ACCESS
• T.WEAK_CRYPTOGRAPHY
• T.UNTRUSTED_COMMUNICATION_CHANNELS
• T.WEAK_AUTHENTICATION_ENDPOINTS
• T.UPDATE_COMPROMISE
• T.UNDETECTED_ACTIVITY
• T.SECURITY_FUNCTIONALITY_COMPROMISE
• T.PASSWORD_CRACKING
• T.SECURITY_FUNCTIONALITY_FAILURE
42. No threats are identified for this TOE in addition to those specified in the collaborative
Protection Profile.
3.2 Assumptions
43. The assumptions made for this TOE are as defined in [NDcPP] Section 4.2, namely:
• A.PHYSICAL_PROTECTION
• A.LIMITED_FUNCTIONALITY
• A.NO_THRU_TRAFFIC_PROTECTION
• A.TRUSTED_ADMINSTRATOR
• A.REGULAR_UPDATES
• A.ADMIN_CREDENTIALS_SECURE
• A.RESIDUAL_INFORMATION
44. No assumptions are identified for this TOE in addition to those specified in the collaborative
Protection Profiles.
3.3 Organizational Security Policies
45. The OSP applied for this TOE is as defined in [NDcPP] Section 4.3, namely:
• P.ACCESS_BANNER
46. No additional OSPs are identified and no modification to the statement of OSPs is made for this
TOE.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 18 of 50
4 Security Objectives
47. As this TOE is not distributed, none of the objectives relating to distributed TOEs are specified
for this TOE.
4.1 Security Objectives for the TOE
48. The security objectives for the TOE are trivially determined through the inverse of the statement
of threats presented in [NDcPP] Section 4.1.
4.2 Security Objectives for the Operational Environment
49. The statement of security objectives for the operational environment of this TOE is as defined in
[NDcPP] Section 5.1, namely:
• OE.PHYSICAL
• OE.NO_GENERAL_PURPOSE
• OE.NO_THRU_TRAFFIC_PROTECTION
• OE.TRUSTED_ADMIN
• OE.UPDATES
• OE.ADMIN_CREDENTIALS_SECURE
• OE.RESIDUAL_INFORMATION
4.3 Security Objectives rationale
50. As these objectives for the TOE and operational environment are the same as those specified in
[NDcPP],the rationales provided in the prose of the following are wholly applicable to this
security target as the statements of threats, assumptions, OSPs and security objectives provided
in this security target are the same as those defined in the collaborative Protection Profile to
which this ST claims conformance
• [NDcPP] section 4.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 19 of 50
5 Security Functional Requirements
51. All security functional requirements are taken from the [NDcPP]. The SFRs are presented in
accordance with the conventions described in [NDcPP] Section 6.1, and section 1.4 of this
document.
52. Note: as this TOE is not distributed, none of the security functional requirements relating to
distributed TOEs are specified for this TOE.
5.1 Security Audit (FAU)
5.1.1 Security Audit Data generation (FAU_GEN)
5.1.1.1 FAU_GEN.1 Audit data generation
FAU_GEN.1 Audit Data Generation
FAU_GEN.1.1 The TSF shall be able to generate an audit record of the following auditable events:
a) Start-up and shut-down of the audit functions;
b) All auditable events for the not specified level of audit; and
c) All administrative actions comprising:
• Administrative login and logout (name of user account shall be logged if individual user
accounts are required for Administrators).
• Changes to TSF data related to configuration changes (in addition to the information
that a change occurred it shall be logged what has been changed).
• Generating/import of, changing, or deleting of cryptographic keys (in addition to the
action itself a unique key name or key reference shall be logged).
• Resetting passwords (name of related user account shall be logged).
• [Starting and stopping services];
d) Specifically defined auditable events listed in Table 4.
ST Application Note:
The “Services” referenced in the above requirement relate to the trusted communication channel to
the external syslog server (netconf over SSH) and the trusted path for remote administrative sessions
(SSH).
FAU_GEN.1.2 The TSF shall record within each audit record at least the following information:
a) Date and time of the event, type of event, subject identity, and the outcome (success or
failure) of the event; and
b) For each audit event type, based on the auditable event definitions of the functional
components included in the ST, information specified in column three of Table 4.
Requirement Auditable Events Additional Audit Record
Contents
FAU_GEN.1 None None
FAU_GEN.2 None None
FAU_STG_EXT.1 None None
FAU_STG.1 None None
FCS_CKM.1 None None
FCS_CKM.2 None None
FCS_CKM.4 None None
FCS_COP.1/DataEncryption None None
FCS_COP.1/SigGen None None
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 20 of 50
FCS_COP.1/Hash None None
FCS_COP.1/KeyedHash None None
FCS_RBG_EXT.1 None None
FIA_AFL.1 Unsuccessful login attempts
limit is met or exceeded.
Origin of the attempt (e.g., IP
address).
FIA_PMG_EXT.1 None None
FIA_UIA_EXT.1 All use of identification and
authentication mechanism.
Provided user identity, origin of
the attempt (e.g., IP address).
FIA_UAU_EXT.2 All use of identification and
authentication mechanism.
Origin of the attempt (e.g., IP
address).
FIA_UAU.7 None None
FMT_MOF.1/ManualUpdate Any attempt to initiate a
manual update
None
FMT_MTD.1/CoreData All management activities of
TSF data
None
FMT_SMF.1 None None
FMT_SMR.2 None None
FPT_SKP_EXT.1 None None
FPT_APW_EXT.1 None None
FPT_TST_EXT.1 None None
FPT_TUD_EXT.1 Initiation of update; result of
the update attempt (success
or failure)
None.
FPT_STM_EXT.1 Discontinuous changes to time
- either Administrator
actuated or changed via an
automated process.
For discontinuous changes to
time: The old and new values for
the time. Origin of the attempt
to change time for success and
failure (e.g., IP address).
FTA_SSL_EXT.1 The termination of a local
interactive session by the
session locking mechanism.
None.
FTA_SSL.3 The termination of a remote
session by the session locking
mechanism.
None
FTA_SSL.4 The termination of an
interactive session.
None
FTA_TAB.1 None None
FTP_ITC.1 Initiation of the trusted
channel.
Termination of the trusted
channel.
Failure of the trusted channel
functions.
Identification of the initiator and
target of failed trusted channels
establishment attempt.
FTP_TRP.1/Admin Initiation of the trusted path.
Termination of the trusted
path.
Failure of the trusted path
functions.
None.
FCS_SSHS_EXT.1 Failure to establish an SSH
session
Reason for failure
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 21 of 50
FIA_X509_EXT.1/Rev Unsuccessful attempt to
validate a certificate
Reason for failure
FIA_X509_EXT.2 None None
FPT_TUD_EXT.2 Failure of update Reason for failure (including
identifier of invalid certificate)
FMT_MOF.1/Functions Modification of the behaviour
of the transmission of audit
data to an external IT entity,
the handling of audit data, the
audit functionality when Local
Audit Storage Space is full.
None.
FMT_MOF.1/Services Starting and stopping of
services.
None
FMT_MTD.1/CryptoKeys Management of cryptographic
keys.
None.
Table 4 FAU_GEN.1 Security Functional Requirements and Auditable Events
5.1.1.2 FAU_GEN.2 User identity association
FAU_GEN.2 User identity association
FAU_GEN.2.1 For audit events resulting from actions of identified users, the TSF shall be able to
associate each auditable event with the identity of the user that caused the event.
5.1.2 Security audit event storage (Extended – FAU_STG_EXT)
5.1.2.1 FAU_ STG_EXT.1 Protected Audit Event Storage
FAU_STG_EXT.1 Protected Audit Event Storage
FAU_STG_EXT.1.1 The TSF shall be able to transmit the generated audit data to an external IT entity
using a trusted channel according to FTP_ITC.1.
ST Application Note
Transfer of the audit data to the external server is performed automatically (without further Security
Administrator intervention) in the evaluated deployment.
FAU_STG_EXT.1.2 The TSF shall be able to store generated audit data on the TOE itself.
FAU_STG_EXT.1.3 The TSF shall [overwrite previous audit records according to the following rule:
[oldest log is overwritten]] when the local storage space for audit data is full.
5.1.2.2 FAU_STG.1 Protected audit trail storage (Optional)
FAU_STG.1 Protected audit trail storage
FAU_STG.1.1 The TSF shall protect the stored audit records in the audit trail from unauthorised
deletion.
FAU_STG.1.2 The TSF shall be able to prevent unauthorised modifications to the stored audit
records in the audit trail.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 22 of 50
5.2 Cryptographic Support (FCS)
5.2.1 Cryptographic Key Management (FCS_CKM)
5.2.1.1 FCS_CKM.1 Cryptographic Key Generation (Refinement)
FCS_CKM.1 Cryptographic Key Generation
FCS_CKM.1.1 The TSF shall generate asymmetric cryptographic keys in accordance with a specified
cryptographic key generation algorithm: [
• RSA schemes using cryptographic key sizes of 2048-bit or greater that meet the
following: FIPS PUB 186-4, “Digital Signature Standard (DSS)”, Appendix B.3;
• ECC schemes using “NIST curves” [P-256, P-384, P-521] that meet the following: FIPS
PUB 186-4, “Digital Signature Standard (DSS)”, Appendix B.4;
• FFC Schemes using Diffie-Hellman group 14 that meet the following: RFC 3526, Section 3
] and specified cryptographic key sizes [assignment: cryptographic key sizes] that meet the
following: [assignment: list of standards].
5.2.1.2 FCS_CKM.2 Cryptographic Key Establishment (Refinement)
FCS_CKM.2 Cryptographic Key Establishment
FCS_CKM.2.1 The TSF shall perform cryptographic key establishment in accordance with a specified
cryptographic key establishment method: [
• Elliptic curve-based key establishment schemes that meet the following: NIST Special
Publication 800-56A Revision 2, “Recommendation for Pair-Wise Key Establishment
Schemes Using Discrete Logarithm Cryptography”;
• Key establishment scheme using Diffie-Hellman group 14 that meets the following: RFC
3526, Section 3;
] that meets the following: [assignment: list of standards].
5.2.1.3 FCS_CKM.4 Cryptographic Key Destruction
FCS_CKM.4 Cryptographic Key Destruction
FCS_CKM.4.1 The TSF shall destroy cryptographic keys in accordance with a specified cryptographic
key destruction method [
• For plaintext keys in volatile storage, the destruction shall be executed by a [destruction
of reference to the key directly followed by a request for garbage collection];
• For plaintext keys in non-volatile storage, the destruction shall be executed by the
invocation of an interface provided by a part of the TSF that [
o logically addresses the storage location of the key and performs a [single
overwrite consisting of [zeroes]]]
that meets the following: No Standard.
5.2.2 Cryptographic Operation (FCS_COP)
5.2.2.1 FCS_COP.1 Cryptographic Operation
FCS_COP.1/DataEncryption Cryptographic Operation (AES Data Encryption/Decryption)
FCS_COP.1.1/DataEncryption The TSF shall perform encryption/decryption in accordance with a
specified cryptographic algorithm AES used in [CBC, CTR] mode and cryptographic key sizes [128 bits,
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 23 of 50
256 bits] that meet the following: AES as specified in ISO 18033-3, [CBC as specified in ISO 10116, CTR
as specified in ISO 10116].
FCS_COP.1/SigGen Cryptographic Operation (Signature Generation and Verification)
FCS_COP.1.1/SigGen The TSF shall perform cryptographic signature services (generation and
verification) in accordance with a specified cryptographic algorithm [
• RSA Digital Signature Algorithm and cryptographic key sizes (modulus) [2048 bits],
• Elliptic Curve Digital Signature Algorithm and cryptographic key sizes [256 bits]
] and cryptographic key sizes [assignment: cryptographic key sizes]
that meet the following: [
• For RSA schemes: FIPS PUB 186-4, “Digital Signature Standard (DSS)”, Section 5.5, using
PKCS #1 v2.1 Signature Schemes RSASSA-PSS and/or RSASSA-PKCS1v1_5; ISO/IEC 9796-2,
Digital signature scheme 2 or Digital Signature scheme 3,
• For ECDSA schemes: FIPS PUB 186-4, “Digital Signature Standard (DSS)”, Section 6 and
Appendix D, Implementing “NIST curves” [P-256, P-384, P-521]; ISO/IEC 14888-3, Section
6.4
].
FCS_COP.1/Hash Cryptographic Operation (Hash Algorithm)
FCS_COP.1.1/Hash The TSF shall perform cryptographic hashing services in accordance with a
specified cryptographic algorithm [SHA-1, SHA-256, SHA-384, SHA-512] and cryptographic key sizes
[assignment: cryptographic key sizes] and message digest sizes [160, 256, 384, 512] bits that meet
the following: ISO/IEC 10118-3:200].
FCS_COP.1/KeyedHash Cryptographic Operation (Keyed Hash Algorithm)
FCS_COP.1.1/KeyedHash The TSF shall perform keyed-hash message authentication in accordance
with a specified cryptographic algorithm [HMAC-SHA-1, HMAC-SHA-256, HMAC-SHA-512] and
cryptographic key sizes [160, 256 and 512 bits] and message digest sizes [160, 256, 512] bits that
meet the following: ISO/IEC 9797-2:2011, Section 7 “MAC Algorithm 2”.
5.2.3 Random Bit Generation (Extended – FCS_RBG_EXT)
5.2.3.1 FCS_RBG_EXT.1 Random Bit Generation
FCS_RBG_EXT.1 Random Bit Generation
FCS_RBG_EXT.1.1 The TSF shall perform all deterministic random bit generation services in
accordance with ISO/IEC 18031:2011 using [HMAC_DRBG (any)].
FCS_RBG_EXT.1.2 The deterministic RBG shall be seeded by at least one entropy source that
accumulates entropy from [[at least 1] software-based noise source, [at least 1] hardware-based
noise source] with a minimum of [256 bits] of entropy at least equal to the greatest security
strength, according to ISO/IEC 18031:2011 Table C.1 “Security Strength Table for Hash Functions”, of
the keys and hashes that it will generate.
ST Application Note
The RE1800 and RE-NG use different entropy sources. Each RE accumulates entropy from at least
one software-based noise source and at least one hardware-based noise source.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 24 of 50
5.2.4 Cryptographic Protocols (Extended –FCS_SSHS_EXT SSH Protocol
5.2.4.1 FCS_SSHS_EXT.1 SSH Server Protocol
FCS_SSHS_EXT.1 SSH Server Protocol
FCS_SSHS_EXT.1.1 The TSF shall implement the SSH protocol that complies with RFC(s) [4251, 4252,
4253, 4254, 5656, 6668].
FCS_SSHS_EXT.1.2 The TSF shall ensure that the SSH protocol implementation supports the
following authentication methods as described in RFC 4252: public key-based, [password-based].
FCS_SSHS_EXT.1.3 The TSF shall ensure that, as described in RFC 4253, packets greater than [262K]
bytes in an SSH transport connection are dropped.
FCS_SSHS_EXT.1.4 The TSF shall ensure that the SSH transport implementation uses the following
encryption algorithms and rejects all other encryption algorithms: [aes128-cbc, aes256-cbc, aes128-
ctr, aes256-ctr].
FCS_SSHS_EXT.1.5 The TSF shall ensure that the SSH public-key based authentication
implementation uses [ecdsa-sha2-nistp256] as its public key algorithm(s) and rejects all other public
key algorithms.
FCS_SSHS_EXT.1.6 The TSF shall ensure that the SSH transport implementation uses [hmac-sha1,
hmac-sha2-256, hmac-sha2-512] as its data integrity MAC algorithm(s) and rejects all other MAC
algorithm(s).
FCS_SSHS_EXT.1.7 The TSF shall ensure that [diffie-hellman-group14-sha1, ecdh-sha2-nistp256] and
[ecdh-sha2-nistp384, ecdh-sha2-nistp521] are the only allowed key exchange methods used for the
SSH protocol.
FCS_SSHS_EXT.1.8 The TSF shall ensure that within SSH connections the same session keys are used
for a threshold of no longer than one hour, and no more than one gigabyte of transmitted data.
After either of the thresholds are reached a rekey needs to be performed.
5.3 Identification and Authentication (FIA)
5.3.1 Authentication Failure Management (FIA_AFL)
5.3.1.1 FIA_AFL.1 Authentication Failure Management (Refinement)
FIA_AFL.1 Authentication Failure Management
FIA_AFL.1.1 The TSF shall detect when an Administrator configurable positive integer within [1 to
10] unsuccessful authentication attempts occur related to Administrators attempting to authenticate
remotely.
FIA_AFL.1.2 When the defined number of unsuccessful authentication attempts has been met, the
TSF shall [
• prevent the offending remote Administrator from successfully authenticating until
[action= administrator has unlocked the account] is taken by a local an Administrator;
or
• prevent the offending remote Administrator from successfully authenticating until an
Administrator defined time period has elapsed].
ST Application Note
The Security Administrator can select to unlock the account of another administrator who has failed
to authenticate, rather than require the administrator to wait until the delay of an administrator-
configured time period has lapsed before another attempt can be made to authenticate.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 25 of 50
5.3.2 Password Management (Extended – FIA_PMG_EXT)
5.3.2.1 FIA_PMG_EXT.1 Password Management
FIA_PMG_EXT.1 Password Management
FIA_PMG_EXT.1.1 The TSF shall provide the following password management capabilities for
administrative passwords:
a) Passwords shall be able to be composed of any combination of upper and lower case letters,
numbers, and the following special characters: [“!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, “)”,
[and all other standard ASCII, extended ASCII and Unicode characters]];
b) Minimum password length shall be configurable to between [10] and [20] characters.
5.3.3 User Identification and Authentication (Extended – FIA_UIA_EXT)
5.3.3.1 FIA_UIA_EXT.1 User Identification and Authentication
FIA_UIA_EXT.1 User Identification and Authentication
FIA_UIA_EXT.1.1 The TSF shall allow the following actions prior to requiring the non-TOE entity to
initiate the identification and authentication process:
• Display the warning banner in accordance with FTA_TAB.1;
• [ICMP echo.]]
FIA_UIA_EXT.1.2 The TSF shall require each administrative user to be successfully identified and
authenticated before allowing any other TSF-mediated actions on behalf of that administrative user.
5.3.4 User authentication (FIA_UAU) (Extended – FIA_UAU_EXT)
5.3.4.1 FIA_UAU_EXT.2 Password-based Authentication Mechanism
FIA_UAU_EXT.2 Password-based Authentication Mechanism
FIA_UAU_EXT.2.1 The TSF shall provide a local password-based authentication mechanism, and [no
other authentication mechanism] to perform local administrative user authentication.
5.3.4.2 FIA_UAU.7 Protected Authentication Feedback
FIA_UAU.7 Protected Authentication Feedback
FIA_UAU.7.1 The TSF shall provide only obscured feedback to the administrative user while the
authentication is in progress at the local console.
5.3.5 Authentication using X.509 certificates (Extended – FIA_X509_EXT)
5.3.5.1 FIA_X509_EXT.1 X.509 Certificate Validation
FIA_X509_EXT.1/Rev X.509 Certificate Validation
FIA_X509_EXT.1.1/Rev The TSF shall validate certificates in accordance with the following rules:
• RFC 5280 certificate validation and certificate path validation supporting a minimum
path length of three certificates.
• The certificate path must terminate with a trusted CA certificate.
• The TSF shall validate a certification path by ensuring that all CA certificates in the
certification path contain the basicConstraints extension with the CA flag set to TRUE.
• The TSF shall validate the revocation status of the certificate using [a Certificate
Revocation List (CRL) as specified in RFC 5280 Section 6.3]
• The TSF shall validate the extendedKeyUsage field according to the following rules:
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 26 of 50
o Certificates used for trusted updates and executable code integrity verification
shall have the Code Signing purpose (id-kp 3 with OID 1.3.6.1.5.5.7.3.3) in the
extendedKeyUsage field.
o Server certificates presented for TLS shall have the Server Authentication
purpose (id-kp 1 with OID 1.3.6.1.5.5.7.3.1) in the extendedKeyUsage field.
o Client certificates presented for TLS shall have the Client Authentication purpose
(id-kp 2 with OID 1.3.6.1.5.5.7.3.2) in the extendedKeyUsage field.
o OCSP certificates presented for OCSP responses shall have the OCSP Signing
purpose (id-kp 9 with OID 1.3.6.1.5.5.7.3.9) in the extendedKeyUsage field.
FIA_X509_EXT.1.2/Rev The TSF shall only treat a certificate as a CA certificate if the basicConstraints
extension is present and the CA flag is set to TRUE.
5.3.5.2 FIA_X509_EXT.2 X.509 Certificate Authentication
FIA_X509_EXT.2 X.509 Certificate Authentication
FIA_X509_EXT.2.1 The TSF shall use X.509v3 certificates as defined by RFC 5280 to support
authentication for [none], and [code signing for system software updates].
FIA_X509_EXT.2.2 When the TSF cannot establish a connection to determine the validity of a
certificate, the TSF shall [accept the certificate].
ST Application Note:
The first selection operation in FIA_X509_EXT.2.1 is completed with “none” in accordance with the
[NDcPP] Application Note 121, which states
“The ST author must include FIA_X509_EXT.2 in all instances except when only SSH is
selected within FTP_ITC.1 or FPT_ITT.1 and ssh-rsa, ecdsa-sha2-nistp256, ecdsa-sha2-
nistp384, and/or ecdsa-sha2-nistp521 authentication is also selected.”
5.4 Security Management (FMT)
5.4.1 Management of functions in TSF (FMT_MOF)
5.4.1.1 FMT_MOF.1/ManualUpdate Management of security functions behaviour
FMT_MOF.1/ManualUpdate Management of security functions behaviour
FMT_MOF.1.1/ManualUpdate The TSF shall restrict the ability to enable the functions to perform
manual updates to Security Administrators.
5.4.1.2 FMT_MOF.1/Services Management of security functions behaviour
FMT_MOF.1/Services Management of security functions behaviour
FMT_MOF.1.1/Services The TSF shall restrict the ability to enable and disable the functions and
services to Security Administrators.
5.4.1.3 FMT_MOF.1/Functions Management of security functions behaviour
FMT_MOF.1/Functions Management of security functions behaviour
FMT_MOF.1.1/Functions The TSF shall restrict the ability to [modify the behaviour of] the functions
[transmission of audit data to an external IT entity, handling of audit data] to Security
Administrators.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 27 of 50
5.4.2 Management of TSF Data (FMT_MTD)
5.4.2.1 FMT_MTD.1/CoreData Management of TSF Data
FMT_MTD.1/CoreData Management of TSF Data
FMT_MTD.1.1/CoreData The TSF shall restrict the ability to manage the TSF data to Security
Administrators.
5.4.2.2 FMT_MTD.1/CryptoKeys Management of TSF data
FMT_MTD.1/CryptoKeys Management of TSF data
FMT_MTD.1.1/CryptoKeys The TSF shall restrict the ability to manage the cryptographic keys to
Security Administrators.
5.4.3 Specification of Management Functions (FMT_SMF)
5.4.3.1 FMT_SMF.1 Specification of Management Functions
FMT_SMF.1 Specification of Management Functions
FMT_SMF.1.1 The TSF shall be capable of performing the following management functions:
[
• Ability to administer the TOE locally and remotely;
• Ability to configure the access banner;
• Ability to configure the session inactivity time before session termination or locking;
• Ability to update the TOE, and to verify the updates using [digital signature] capability
prior to installing those updates;
• Ability to configure the authentication failure parameters for FIA_AFL.1;
[
o Ability to configure audit behaviour;
o Ability to configure the cryptographic functionality;
o Ability to configure thresholds for SSH rekeying;
o Ability to re-enable an Administrator account;
o Ability to set the time which is used for time-stamps]
]
5.4.4 Security management roles (FMT_SMR)
5.4.4.1 FMT_SMR.2 Restrictions on security roles
FMT_SMR.2 Restrictions on Security Roles
FMT_SMR.2.1 The TSF shall maintain the roles:
• Security Administrator.
FMT_SMR.2.2 The TSF shall be able to associate users with roles.
FMT_SMR.2.3 The TSF shall ensure that the conditions
• The Security Administrator role shall be able to administer the TOE locally;
• The Security Administrator role shall be able to administer the TOE remotely
are satisfied.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 28 of 50
5.5 Protection of the TSF (FPT)
5.5.1 Protection of TSF Data (Extended – FPT_SKP_EXT)
5.5.1.1 FPT_SKP_EXT.1 Protection of TSF Data (for reading of all pre-shared, symmetric
and private keys)
FPT_SKP_EXT.1 Protection of TSF Data (for reading of all pre-shared, symmetric and private keys)
FPT_SKP_EXT.1.1 The TSF shall prevent reading of all pre-shared keys, symmetric keys, and private
keys.
5.5.2 Protection of Administrator Passwords (Extended – FPT_APW_EXT)
5.5.2.1 FPT_APW_EXT.1 Protection of Administrator Passwords
FPT_APW_EXT.1 Protection of Administrator Passwords
FPT_APW_EXT.1.1 The TSF shall store passwords in non-plaintext form.
FPT_APW_EXT.1.2 The TSF shall prevent the reading of plaintext passwords.
5.5.3 TSF testing (Extended – FPT_TST_EXT)
5.5.3.1 FPT_TST_EXT.1 TSF Testing (Extended)
FPT_TST_EXT.1 TSF testing
FPT_TST_EXT.1.1 The TSF shall run a suite of the following self-tests [during initial start-up (on
power on)] to demonstrate the correct operation of the TSF: [
• Power on test,
• File integrity test,
• Crypto integrity test,
• Authentication test,
• Algorithm known answer tests].
5.5.4 Trusted Update (FPT_TUD_EXT)
5.5.4.1 FPT_TUD_EXT.1 Trusted Update
FPT_TUD_EXT.1 Trusted update
FPT_TUD_EXT.1.1 The TSF shall provide Security Administrators the ability to query the currently
executing version of the TOE firmware/software and [no other TOE firmware/software version].
FPT_TUD_EXT.1.2 The TSF shall provide Security Administrators the ability to manually initiate
updates to TOE firmware/software and [no other update mechanism].
FPT_TUD_EXT.1.3 The TSF shall provide means to authenticate firmware/software updates to the
TOE using a [digital signature mechanism] prior to installing those updates.
5.5.4.2 FPT_TUD_EXT.2 Trusted Update based on certificates
FPT_TUD_EXT.2 Trusted Update based on certificates
FPT_TUD_EXT.2.1 The TSF shall not install an update if the code signing certificate is deemed invalid.
FPT_TUD_EXT.2.2 When the certificate is deemed invalid because the certificate has expired, the
TSF shall [not accept the certificate].
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 29 of 50
5.5.5 Time stamps (Extended – FPT_STM_EXT))
5.5.5.1 FPT_STM_EXT.1 Reliable Time Stamps
FPT_STM_EXT.1 Reliable Time Stamps
FPT_STM_EXT.1.1 The TSF shall be able to provide reliable time stamps for its own use.
FPT_STM_EXT.1.2 The TSF shall [allow the Security Administrator to set the time].
5.6 TOE Access (FTA)
5.6.1 TSF-initiated Session Locking (Extended – FTA_SSL_EXT)
5.6.1.1 FTA_SSL_EXT.1 TSF-initiated Session Locking
FTA_SSL_EXT.1 TSF-initiated Session Locking
FTA_SSL_EXT.1.1 The TSF shall, for local interactive sessions, [
• terminate the session]
after a Security Administrator-specified time period of inactivity.
5.6.2 Session locking and termination (FTA_SSL)
5.6.2.1 FTA_SSL.3 TSF-initiated Termination (Refinement)
FTA_SSL.3 TSF-initiated Termination
FTA_SSL.3.1: The TSF shall terminate a remote interactive session after a Security Administrator-
configurable time interval of session inactivity.
5.6.2.2 FTA_SSL.4 User-initiated Termination (Refinement)
FTA_SSL.4 User-initiated Termination
FTA_SSL.4.1: The TSF shall allow Administrator-initiated termination of the Administrator’s own
interactive session.
5.6.3 TOE access banners (FTA_TAB)
5.6.3.1 FTA_TAB.1 Default TOE Access Banners (Refinement)
FTA_TAB.1 Default TOE Access Banners
FTA_TAB.1.1: Before establishing an administrative user session the TSF shall display a Security
Administrator-specified advisory notice and consent warning message regarding use of the TOE.
5.7 Trusted path/channels (FTP)
5.7.1 Trusted Channel (FTP_ITC)
5.7.1.1 FTP_ITC.1 Inter-TSF trusted channel (Refinement)
FTP_ITC.1 Inter-TSF trusted channel
FTP_ITC.1.1 The TSF shall be capable of using [SSH] to provide a trusted communication channel
between itself and authorized IT entities supporting the following capabilities: audit server, [no
other capabilities] that is logically distinct from other communication channels and provides assured
identification of its end points and protection of the channel data from disclosure and detection of
modification of the channel data.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 30 of 50
FTP_ITC.1.2 The TSF shall permit the TSF or the authorized IT entities to initiate communication via
the trusted channel.
FTP_ITC.1.3 The TSF shall initiate communication via the trusted channel for [no services].
5.7.2 Trusted Path (FTP_TRP)
5.7.2.1 FTP_TRP.1/Admin Trusted Path (Refinement)
FTP_TRP.1/Admin Trusted Path
FTP_TRP.1.1/Admin The TSF shall be capable of using [SSH] to provide a communication path
between itself and authorized remote Administrators that is logically distinct from other
communication paths and provides assured identification of its end points and protection of the
communicated data from disclosure and provides detection of modification of the channel data.
FTP_TRP.1.2/Admin The TSF shall permit remote Administrators to initiate communication via the
trusted path.
FTP_TRP.1.3/Admin The TSF shall require the use of the trusted path for initial Administrator
authentication and all remote administration actions.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 31 of 50
6 Security Assurance Requirements
53. The TOE security assurance requirements are taken from [NDcPP] , together with the
refinements documented in [NDcPP] Section 7, as listed in Table 5 below.
Assurance Class Assurance Component
Security Target (ASE) Conformance claims (ASE_CCL.1)
Extended components definition (ASE_ECD.1)
ST introduction (ASE_INT.1)
Security objectives for the operational environment (ASE_OBJ.1)
Stated security requirements (ASE_REQ.1)
Security Problem Definition (ASE_SPD.1)
TOE summary specification (ASE_TSS.1)
Development (ADV) Basic functional specification (ADV_FSP.1)
Guidance documents (AGD) Operational user guidance (AGD_OPE.1)
Preparative procedures (AGD_PRE.1)
Life cycle support (ALC) Labelling of the TOE (ALC_CMC.1)
TOE CM coverage (ALC_CMS.1)
Tests (ATE) Independent testing – conformance (ATE_IND.1)
Vulnerability assessment (AVA) Vulnerability survey (AVA_VAN.1)
Table 5 Security Assurance Requirements
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 32 of 50
7 TOE Summary Specification
7.1 Protected communications
54. Local console access is gained by connecting an RJ-45 cable between the console port on the
appliance and a workstation with a serial connection client.
7.1.1 Algorithms and zeroization
55. All FIPS-approved cryptographic functions implemented by the router are implemented in the
following libraries:
• RE1800 - OpenSSL
56. All random number generation by the TOE is performed in accordance with NIST Special
Publication 800-90 using HMAC_DRBG implemented in the OpenSSL library and kernel library
(FCS_RBG_EXT.1.1). Additionally, SHA (256,512) is implemented in the LibMD library which is
used for password hashing by Junos’ MGD daemon. The router is to be operated with FIPS
mode enabled.
57. The TOE evaluation provides a CAVP validation certificate for all FIPS-approved cryptographic
functions implemented by the TOE. CAVP certificate details are provided in Table 6.
Implementation FIPS PUB
Algorithm, Mode, Keysize, Function,
Hashing, Usage
Certificate
Number
OpenSSL FIPS 197, SP
800-38A
AES-CBC (128, 256)
(Encrypt, Decrypt)
5466
FIPS 197,
SP800-38A
AES-CTR (128, 256)
(Encrypt, Decrypt)
5466
FIPS 180-4 SHA1, SHA2-256, SHA2-384, SHA2-512
(byte Oriented)
(Message Digest Generation)
4387
FIPS 198-1 HMAC-SHA-1, HMAC-SHA2-256, HMAC-
SHA2-512
(byte Oriented)
(Message Authentication)
3624
FIPS 186-4 ECDSA (P-256 w/ SHA-256)
ECDSA (P-384 w/ SHA-384)
ECDSA (P-521 w/ SHA-521)
(SigGen, SigVer, KeyGen, KeyVer for ECDH)
1462
FIPS 186-4 RSA PKCS1_V1_52
(n=2048 (SHA 256))
(SigGen, SigVer, KeyGen, KeyVer)
2936
SP 800-90A DRBG (HMAC-SHA-2-256)
Prediction Resistance: Enabled
(Random Bit Generation)
2147
2
Including PKCS#1 v1.5 padding
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 33 of 50
Implementation FIPS PUB
Algorithm, Mode, Keysize, Function,
Hashing, Usage
Certificate
Number
SP 800-56A CVL/KAS ECC Key Agreement
Public key Validation, Key Pair Generation
Initiator, Responder
EC (P-256, SHA-256), ED (P-384, SHA-384),
EE (P-521, SHA-512)
1917
Table 6 CAVP Certificate Results for Cryptographic Services
58. Each TOE appliance implements an Intel Xeon E5. The FIPS approved algorithms are applied
when the FIPS mode is enabled3
. (FCS_COP.1/DataEncryption, FCS_COP.1/SigGen,
FCS_COP.1/Hash, FCS_COP.1/KeyedHash, FCS_RBG_EXT.1, FCS_CKM.1, FMT_SMF.1)
59. Asymmetric keys are generated in accordance with FIPS PUB 186-4 Appendix B.3 for RSA
Schemes and Appendix B.4 for ECC Schemes for SSH communications. The TOE implements all of
the "shall" and "should" requirements and none of the "shall not" or "should not" from FIPS PUB
186-4 Appendix B3 and B4. The TOE implements Diffie-Hellman group 14, using the modulus and
generator specified by Section 3 of RFC3526. (FCS_CKM.1, FCS_CKM.2)
60. The following table relates cryptographic algorithms to the protocols by the TOE. The TOE acts as
the server for SSH as described below:
Protocol Key Exchange Auth Cipher Integrity
SSHv2
ECDH-sha2-nistp256
ECDH-sha2-nistp384
ECDH-sha2-nistp521
Diffie-Hellman group
14 (modp 2048)
ECDSA P-256 AES CBC 128
AES CBC 256
AES CTR 128
AES CTR 256
HMAC-SHA-1
HMAC-SHA-256
HMAC-SHA-512
Table 7 Supported Protocols
61. Junos OS handles zeroization for all CSP, plaintext secret and private cryptographic keys
according to Table 8 below. (FCS_CKM.4).
3
The knob “set system fips level 1” will enforce strict compliance to FIPS and enable restrictions on algorithms
and keys sizes as required by FIPS requirements.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 34 of 50
CSP Description Method of
storage
Storage
location
Zeroization Method
SSH
Private
Host Key
The first time SSH is
configured the set of Host
keys is generated. Used to
identify the host.
ecdsa-sha2-nistp256
(ECDSA P‐256) and/or ssh-
rsa (RSA 2048)
Plaintext File format
on SDD
When the appliance is
recommissioned, the config files
(including CSP files such as SSH
keys) are removed using the
“request system zeroize”
command on RE1800 and
“request vmhost zeroize” on the
RE-NG4
.
Loaded into memory to
complete session
establishment
Plaintext Memory Memory free() operation is
performed by Junos upon session
termination and power cycle
SSH
Session
Key
Session keys used with
SSH, AES 128, 256, hmac-
sha-1, hmac-sha2-256 or
hmac-sha2-512 key (160,
256 or 512), DH Private
Key (2048 or elliptic curve
256-bits)
Plaintext Memory Memory free() operation is
performed by Junos upon session
termination and power cycle
User
Password
Plaintext value as entered
by user
Plaintext as
entered
Processed
in Memory
Memory free() operation is
performed by Junos upon
completion of authentication
Hashed when
stored
(HMAC-sha1,
sha256,
sha512)
Stored on
disk
When the appliance is
recommissioned, the config files
(including the obfuscated
password) are removed using the
“request system zeroize”
command on RE1800 and
“request vmhost zeroize” on the
RE-NG.
RNG State Internal state and seed key
of RNG
Plaintext Memory Handled by kernel, overwritten
with zero’s at reboot.
ecdh
private
keys
Loaded into memory to
complete key exchange in
session establishment
Plaintext Memory Memory free() operation is
performed by Junos upon session
termination
Table 8 CSP Storage and Zeroization
62. Junos OS does not provide a CLI interface to permit the viewing of keys. Cryptographic keys are
protected through the enforcement of kernel-level file access rights, limiting access to the
contents of cryptographic key containers to processes with cryptographic rights or shell users
with root permission5
. (FPT_SKP_EXT.1)
7.1.2 Random Bit Generation
63. Junos OS performs random bit generation in accordance with NIST Special Publication 800-90
using HMAC_DRBG, SHA-256:
4
These commands zeroize both the Guest OS and Host OS on the respective Routing Engine.
5
Security Administrators do not have root permission in shell.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 35 of 50
• The RBG in the RE1800 Routing Engine is seeded from a software source and a hardware
source:
• RANDOM_NET_ETHER: This software entropy source contributes entropy on interrupt
from network DMA. The cycle count along with 256 bits from an internal packet data
buffer is collected. The packet data is squashed to a 4 bytes hash using a Jenkins hash
algorithm plus 64 bits of cycle counter. This entropy is fed into HMAC_DRBG.
• RANDOM_INTERRUPT: This hardware entropy source is provided by devices whose
hardware interrupts are known to provide some amount of entropy, such as hard drive
controllers. The timings are fed into Junos Kernel HMAC_DRBG, along with a CPU cycle
counter.
• The RBG in the RE-NG Routing Engine is seeded from a software source and a number of
hardware source:
• RANDOM_INTERRUPT: This hardware source of entropy is associated with hardware
devices whose real-time interrupts are known to provide some amount of entropy. The
internal representation of handling these interrupts provide entropy. This source can
provide entropy both during system boot and steady state.
• RANDOM_NET_ETHER: This software source of entropy is associated with network
activity. Timings (CPU counter values at the time of the event) together with internal
representation of network packets are used to harvest entropy from this source and is
further fed into the HMAC DRBG
• RANDOM_SWI: This hardware source of entropy refers to the entropy obtained due to
the kernel scheduling different threads in the system in response to the Software
Interrupts coming in for resource requests or time slices. Internal representation of the
event and the corresponding handler provide entropy. This source can provide entropy
both during system boot and steady state.
• RANDOM_FS_ATIME: This hardware source of entropy is associated with the time slices
during access of the temporary file storage such as a tmpfs in the system. Continuous
process of creation, access and destruction of files in the temporary space in a running
system provides randomness.
• RANDOM_ATTACH: This hardware source of entropy is associated with the elapsed cycle
count for each device-driver as it attaches to the associated devices in the system and
provide entropy during boot-up only.
• RANDOM_PURE_VIRTIO: This software source of entropy is associated with VIRTIO
driver, the driver contributes to the system entropy using VIRTIO PCI device virtio-rng-
pci, which is hooked onto the host side /dev/random using the Qemu infrastructure.
7.1.3 SSH
64. Junos OS supports and enforces Trusted Channels that protect the communications between the
TOE and a remote audit server from unauthorized disclosure or modification. It also supports
Trusted Paths between itself and remote administrators so that the contents of administrative
sessions are protected against unauthorized disclosure or modification. (FTP_ITC.1,
FTP_TRP.1/Admin)
65. Junos OS provides an SSH server to support Trusted Channels using SSHv2 protocol which
ensures the confidentiality and integrity of communication with the remote audit server. Export
of audit information to a secure, remote server is achieved by setting up an event trace monitor
that sends event log messages by using NETCONF over SSH to the remote system event logging
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 36 of 50
server. The remote audit server initiates the connection. The SSHv2 protocol ensures that the
data transmitted over a SSH session cannot be disclosed or altered by using the encryption and
integrity mechanisms of the protocol with the FIPS cryptographic module. (FTP_ITC.1,
FCS_SSHS_EXT.1)
66. The Junos OS SSH Server also supports Trusted Paths using SSHv2 protocol which ensures the
confidentiality and integrity of user sessions. The encrypted communication path between Junos
OS SSH Server and a remote administrator is provided by the use of an SSH session. Remote
administrators of Junos OS initiate communication to the Junos CLI through the SSH tunnel
created by the SSH session. Assured identification of Junos OS is guaranteed by using public key
based authentication for SSH. The SSHv2 protocol ensures that the data transmitted over an SSH
session cannot be disclosed or altered by using the encryption and integrity mechanisms of the
protocol with the FIPS cryptographic module. (FTP_TRP.1/Admin, FCS_SSHS_EXT.1)
67. The Junos OS SSH server is implemented in accordance with RFCs 4251, 4252, 4253, 4254, 5656
and 6668. Junos OS provides assured identification of the Junos OS appliance though public key
authentication and supports password-based and public key based authentication by
administrative users (Security Administrator) for SSH connections. The following table identifies
conformance to the SSH related RFCs:
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 37 of 50
RFC Summary TOE implementation of Security
RFC 4251 The Secure Shell
(SSH) Protocol
Architecture
Host Keys: The TOE uses an ECDSA Host Key for SSH v2, with a
key size of 256 bits or greater, which is generated on initial
setup of the TOE. It can be de-configured via the CLI and the key
will be deleted and thus unavailable during connection
establishment. This key is randomly generated to be unique to
each TOE instance. The TOE presents the client with its public
key and the client matches this key against its known_hosts list
of keys. When a client connects to the TOE, the client will be
able to determine if the same host key was used in previous
connections, or if the key is different (per the SSHv2 protocol).
Policy Issues: The TOE implements all mandatory algorithms and
methods. The TOE can be configured to accept public-key based
authentication and/or password-based authentication. The TOE
does not require multiple authentication mechanisms for users.
The TOE allows port forwarding and sessions to clients. The TOE
has no X11 libraries or applications and X11 forwarding is
prohibited.
Confidentiality: The TOE does not accept the “none” cipher.
supports AES-CBC-128, AES-CBC-256, AES-CTR-128, AES-CTR-256
encryption algorithms for protection of data over SSH and uses
keys generated in accordance with “ecdsa-sha2-nistp256” to
perform public-key based device authentication. For ciphers
whose blocksize >= 16, the TOE rekeys every (2^32-1) bytes.
The client may explicitly request a rekeying event as a valid
SSHv2message at any time and the TOE will honor this request.
Re-keying of SSH session keys can be configured using the
sshd_config knob. The data-limit must be between 51200 and
4294967295 (2^32-1) bytes and the time-limit must be between
1 and 1440 minutes. In the evaluated deployment the time-limit
must be set within 1 and 60 minutes.
Denial of Service: When the SSH connection is brought down,
the TOE does not attempt to re-establish it.
Ordering of Key Exchange Methods: Key exchange is performed
only using one of the supported key exchange algorithms, which
are ordered as follows: ecdh-sha2-nistp256.
Debug Messages: The TOE sshd server does not support debug
messages via the CLI.
End Point Security: The TOE permits port forwarding.
Proxy Forwarding: The TOE permits proxy forwarding.
X11 Forwarding: The TOE does not support X11 forwarding.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 38 of 50
RFC Summary TOE implementation of Security
RFC 4252 The Secure Shell
(SSH) Authentication
Protocol
Authentication Protocol: The TOE does not accept the “none”
authentication method. The TOE implements a timeout period
of 30seconds for authentication of the SSHv2 protocol and
provides a limit of three failed authentication attempts before
sending a disconnect to the client.
Authentication Requests: The TOE does not accept
authentication if the requested service does not exist. The TOE
does not allow authentication requests for a non-existent
username to succeed – it sends back a disconnect message as it
would for failed authentications and hence does not allow
enumeration of valid usernames. The TOE denies “none”
authentication method and replies with a list of permitted
authentication methods.
Public Key Authentication Method: The TOE supports public key
authentication for SSHv2 session authentication. The SSH client
authenticates the identity of the SSH server using a local
database associating each host name with its corresponding
public key. Authentication succeeds if the correct private key is
used. The TOE does not require multiple authentications (public
key and password) for users.
Password Authentication Method: The TOE supports password
authentication. Expired passwords are not supported and
cannot be used for authentication.
Host-Based Authentication: The TOE does not support the
configuration of host-based authentication methods.
RFC 4253 The Secure Shell
(SSH) Transport
Layer Protocol
Encryption: The TOE offers the following for encryption of SSH
sessions: aes128-cbc and aes256-cbc, aes128-ctr, aes256-ctr.
The TOE permits negotiation of encryption algorithms in each
direction. The TOE does not allow the “none” algorithm for
encryption.
Maximum Packet length: Packets greater than 262Kbytes in an
SSH transport connection are dropped and the connection is
terminated by Junos OS.
Data Integrity: The TOE permits negotiation of HMAC-SHA1 in
each direction for SSH transport.
Key Exchange: The TOE supports diffie-hellman-group14-sha1.
Key Re-Exchange: The TOE performs a re-exchange when
SSH_MSG_KEXINIT is received.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 39 of 50
RFC Summary TOE implementation of Security
RFC 4254 Secure Shell (SSH)
Connection Protocol
Multiple channels: The TOE assigns each channel a number (as
detailed in RFC 4251, see above).
Data transfers: The TOE supports a maximum window size of
256K bytes for data transfer.
Interactive sessions: The TOE only supports interactive sessions
that do NOT involve X11 forwarding.
Forwarded X11 connections: This is not supported in the TOE.
Environment variable passing: The TOE only sets variables once
the server process has dropped privileges.
Starting shells/commands: The TOE supports starting one of
shell, application program or command (only one request per
channel). These will be run in the context of a channel, and will
not halt the execution of the protocol stack.
Window dimension change notices: The TOE will accept
notifications of changes to the terminal size (dimensions) from
the client.
Port forwarding: This is fully supported by the TOE.
RFC5656 SSH ECC Algorithm
Integration
ECDH Key Exchange: The support key exchange methods
specified in this RFC are ecdh-sha2-nistp256, ecdh-sha2-
nistp384, or ecdh-sha2-nistp521. The client matches the key
against its known_hosts list of keys.
Hashing: Junos OS supports cryptographic hashing via the SHA-
256, SHA-384 and SHA-512 algorithms, provided it has a
message digest size of either 256, 384 or 512 bytes.Required
Curves: All required curves are implemented: ecdh-sha2-
nistp256, ecdh-sha2-nistp384, or ecdh-sha2-nistp521. None of
the Recommended Curves are supported as they are not
included in [NDcPP].
RFC 6668 sha2-Transport Layer
Protocol
Data Integrity Algorithms: Both the recommended and optional
algorithms hmac-sha2-256 and hmac-sha2-512 (respectively) are
implemented for SSH transport.
Table 9 SSH RFC conformance
68. Certificates are stored in non-volatile flash memory. Access to flash memory requires
administrator credentials. A certificate may be loaded via command line (FIA_X.509_EXT.1).
7.2 Administrator Authentication
69. Junos OS enforces binding between human users and subjects. The Security Administrator6
is
responsible for provisioning user accounts, and only the Security Administrator can do so.
(FMT_SMR.2)
70. Junos users are configured under “system login user” and are exported to the password
database ‘/var/etc/master.passwd’. A Junos user is therefore an entry in the password
database. Each entry in the password database has fields corresponding to the attributes of
“system login user”, including username, (obfuscated) password and login class.
71. The internal architecture supporting Authentication includes an active process, associated linked
libraries and supporting configuration data. The Authentication process and library are
• login()
6
The Security Administrator role is detailed in Section 7.6 below.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 40 of 50
• PAM Library module
72. Following TOE initialization, the login() process is listening for a connection at the local
console. This ‘login’ process can be accessed through either direct connection to the local
console or following successful establishment of a remote management connection over SSH,
when a login prompt is displayed.
73. This login process identifies and authenticates the user using PAM operations. The login process
does two things; it first establishes that the requesting user is whom they claim to be and second
provides them with an interactive Junos Command interactive command line interface (CLI).
74. The SSH daemon supports public key authentication by looking up a public key in an authorized
keys file located in the directory ‘.ssh’ in the user’s home directory (i.e. ‘~/.ssh/’) and this
authentication method will be attempted before any other if the client has a key available
(FIA_UIA_EXT.1). The SSH daemon will ignore the authorized keys file if it or the directory ‘.ssh’
or the user’s home directory are not owned by the user or are writeable by anyone else.
75. For password authentication, login() interacts with a user to request a username and
password to establish and verify the user’s identity. The username entered by the administrator
at the username prompt is reflected to the screen, but no feedback to screen is provided while
the entry made by the administrator at the password prompt until the Enter key is pressed
(FIA_UAU.7). login() uses PAM Library calls for the actual verification of this data. The
password is hashed and compared to the stored value, and success/failure is indicated to
login(), (FIA_UIA_EXT.1). PAM is used in the TOE support authentication management,
account management, session management and password management. Login primarily uses
the session management and password management functionality offered by PAM.
76. The retry-options can be configured to specify the action to be taken if the administrator fails to
enter valid username/password credentials for password authentication when attempting to
authenticate via remote access. The retry-options are applied following the first failed login
attempt for a given username (FIA_AFL.1). The length of delay (5-10 seconds) after each failed
attempt is specified by the backoff-factor, and the increase of the delay for each subsequent
failed attempt is specified by the backoff-threshold (1-3). The tries-before-disconnect sets the
maximum number of times (1-10) the administrator is allowed to enter a password to attempt
to log in to the device through SSH before the connection is disconnected. The lockout-period
sets the amount of time in minutes before the administrator can attempt to log in to the device
after being locked out due to the number of failed login attempts (1-43,200 minutes). It is also
possible for another administrator to “unlock” the account of administrator whose account has
been locked for a period of time following failed authentication attempts. Even when an
account is blocked for remote access to the TOE, an administrator is always able to login locally
through the serial console and the administrator can attempt authentication via remote access
after the maximum timeout period of 24 hours.
77. The TOE requires users to provide unique identification and authentication data
(passwords/public key) before any access to the system is granted. Prior to authentication, the
only Junos OS managed responses provided to the administrator are (FIA_UAU_EXT.2):
• Negotiation of SSH session
• Display of the access banner
• ICMP echo responses.
78. Authentication data for fixed password authentication is a case-sensitive, alphanumeric value.
The password has a minimum length of 10 characters and maximum length of 20 characters, and
must contain characters from at least two different character sets (upper, lower, numeric,
punctuation), and can be up to 20 ASCII characters in length (control characters are not
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 41 of 50
recommended). Any standard ASCII, extended ASCII and Unicode characters can be selected
when choosing a password. (FIA_PMG_EXT.1)
79. Locally stored authentication credentials are protected (FPT_APW_EXT.1):
• The passwords are stored in obfuscated form using HMAC-sha1.
• Authentication data for public key-based authentication methods are stored in a directory
owned by the user (and typically with the same name as the user). This directory contains
the files ‘.ssh/authorized_keys’ and ‘.ssh/authorized_keys2’ which are used for SSH public
key authentication.
80. Junos enables Security Administrators to configure an access banner provided with the
authentication prompt. The banner can provide warnings against unauthorized access to the
secure switch as well as any other information that the Security Administrator wishes to
communicate. This banner is applicable to all administrative interface. (FTA_TAB.1)
81. User sessions (local and remote) can be terminated by users (FTA_SSL.4). The administrative
user can logout of existing session by typing logout to exit the CLI admin session and the Junos
OS makes the current contents unreadable after the admin initiates the termination. No user
activity can take place until the user re-identifies and authenticates.
82. The Security Administrator can set the TOE so that a user session is terminated after a period of
inactivity. (FTA_SSL_EXT.1, FTA_SSL.3) For each user session Junos OS maintains a count of
clock cycles (provided by the system clock) since last activity. The count is reset each time there
is activity related to the user session. When the counter reaches the number of clock cycles
equating to the configured period of inactivity the user session is locked out.
83. Junos OS overwrites the display device and makes the current contents unreadable after the
local interactive session is terminated due to inactivity, thus disabling any further interaction
with the TOE. This mechanism is the inactivity timer for administrative sessions. The Security
Administrator can configure this inactivity timer on administrative sessions after which the
session will be logged out.
7.3 Correct Operation
84. Junos OS runs the following set of self-tests during power on to check the correct operation of
the Junos OS firmware (FPT_TST_EXT.1):
• Power on test – determines the boot-device responds, and performs a memory size check to
confirm the amount of available memory.
• File integrity test –verifies integrity of all mounted signed packages, to assert that system
files have not been tampered with. To test the integrity of the firmware, the fingerprints of
the executables and other immutable files are regenerated and validated against the SHA1
fingerprints contains in the manifest file.
• Crypto integrity test – checks integrity of major CSPs, such as SSH hostkeys.
• Authentication error – verifies that veriexec is enabled and operates as expected using
/opt/sbin/kats/cannot-exec.real.
• Kernel, libmd, OpenSSL,– verifies correct output from known answer tests for appropriate
algorithms and verifies X509 certificate validity checks
85. Juniper Networks devices run only binaries supplied by Juniper Networks. Within the package,
each Junos OS firmware image includes fingerprints of the executables and other immutable
files. Junos firmware will not execute any binary without validating a fingerprint. This feature
protects the system against unauthorized firmware and activity that might compromise the
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 42 of 50
integrity of the device. These self-tests ensure that only authorized executables are allowed to
run thus ensuring the correct operation of the TOE.
86. In the event of a transiently corrupt state or failure condition, the system will panic; the event
will be logged and the system restarted, having ceased to process network traffic. When the
system restarts, the system boot process does not succeed without passing all applicable self-
tests.
87. When any self-test fails, the device halts in an error state. No command line input or traffic to
any interface is processed. The device must be power cycled to attempt to return to operation.
This self-test behavior is discussed in [ECG]. (FPT_TST_EXT.1)
7.4 Trusted Update
88. Security Administrators are able to query the current version of the TOE firmware using the CLI
command “show version” (FPT_TUD_EXT.1) and, if a new version of the TOE firmware is
available, initiate an update of the TOE firmware. Junos OS does not provide partial updates for
the TOE, customers requiring updates must migrate to a subsequent release. Updates are
downloaded and applied manually (there is no automatic updating of the Junos OS).
(FPT_TUD_EXT.1, FMT_SMF.1, FMT_MOF.1/ManualUpdate,)
89. The installable firmware package containing the Junos OS has a digital signature that is checked
when the Security Administrator attempts to install the package. The firmware is digitally signed,
and provides a certificate chain which must terminate at one of the internal CA certificates. The
signature of the complete package is verified at the beginning of the installation process before
the package is expanded. If signature verification fails, an error message is displayed and the
package is not installed.
90. In the NDcPP deployment, “disable on-download-failure” is set to enforce revocation checks
using a CRL in local trust store cache7
. (An updated CRL is loaded during a firmware update, as it
is embedded within the firmware binary.) If the certificate considered for validation is not
present in the list of revoked certificates in the local cache, then the validation succeeds. If the
CRL is not available in Junos OS cache, the certificate is considered to have failed validation. The
CRL is verified during the installation process. (FIA_X509_EXT.2)
91. The Junos OS kernel maintains a set of fingerprints (SHA1 digests) for executable files and other
files which should be immutable, as described in Section 7.3. The manifest file is signed using
the Juniper package signing key, and is verified by the TOE using the accompanying X.509
certificate (stored on the TOE filesystem in clear, protected by filesystem access rights). ECDSA
(P-256) with SHA-256 is used for digit signature package verification.
92. The fingerprint loader will only process a manifest for which it can verify the signature. Thus
without a valid digital signature an executable cannot be run. When the command is issued to
install an update, the manifest file for the update is verified and stored, and each
executable/immutable file is verified before it is executed. If any of the fingerprints in an update
are not correctly verified, the TOE uses the last known verified image.
93. A certificate may be loaded via command line, and is stored in SSD. Access to flash memory
requires administrator credentials. Cryptographic keys are protected through the enforcement
of kernel-level file access rights, limiting access to the contents of cryptographic key containers
to processes with cryptographic rights. The TOE does not provide a CLI interface to permit the
viewing of keys. (FIA_X.509_EXT.1/Rev, FMT_MTD.1/CoreData).
7
The trust store, embedded in the running Junos, contains a number of CA certificates and their CRLs if
applicable (a CRL is only present if that CA has ever revoked a certificate).
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 43 of 50
94. To validate X.509v3 certificates (as defined in RFC 5280) used to digitally sign the install
packages, Junos OS extracts the subject, issuer, subjects public key, signature, basicConstraints
and validity period fields. If any of those fields is not present, the validation fails.
95. Junos OS also extracts the extendedKeyUsage field and verifies the value represents that for the
Code Signing purpose (id-kp 3 with OID 1.3.6.1.5.5.7.3.3).
96. The issuer is looked up in the PKI database. If the issuer is not present, or if the issuer certificate
does not have the CA:true flag in the basicConstraints section, the validation fails. Junos OS
verifies the validity of the signature. If the signature is not valid, the validation fails. It then
confirms that the current date and time is within the valid time period specified in the
certificate. If it is not, the update fails.
97. Junos OS validates a certificate path by building a chain of certificates based upon issuer and
subject linkage, validating each according the certificate validation procedure described above. If
any certificate in the chain fails validation, the validation fails as a whole. The certificate chains
are complete - up to the rootCA - which is then verified against the internal trust store8
.
98. (FCS_COP.1/SigGen, FPT_TUD_EXT.2, FIA_X509_EXT.1/Rev, FIA_X509_EXT.2,
FMT_MTD.1/CoreData, FPT_TUD_EXT.2)
7.5 Audit
99. Junos OS creates and stores audit records for the following events (the detail of content
recorded for each audit event is detailed in Table 4 (FAU_GEN.1). Auditing is implemented using
syslog.
• Start-up and shut-down of the audit functions
• Administrative login and logout
• Configuration is committed
• Configuration is changed (includes all management activities of TSF data)
• Generating/import of, changing, or deleting of cryptographic keys (see below for more
detail)
• Resetting passwords
• Starting and stopping services
• All use of the identification and authentication mechanisms
• Unsuccessful login attempts limit is met or exceeded
• Any attempt to initiate a manual update
• Result of the update attempt (success or failure)
• The termination of a local/remote/interactive session by the session locking mechanism
• Initiation/termination/failure of the SSH trusted channel to syslog server
• Initiation/termination/failure of the SSH trusted path with Admin
100. In addition the following management activities of TSF data are recorded:
• configure the access banner;
8
The last certificate in the provided chain must match a certificate in the internal trust store, or be issued by
one.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 44 of 50
• configure the session inactivity time before session termination;
• configure the authentication failure parameters for FIA_AFL.1;
• Ability to configure audit behaviour;
• configure the cryptographic functionality;
• configure thresholds for SSH rekeying;
• re-enable an Administrator account;
• set the time which is used for time-stamps.
101. The detail of what events are to be recorded by syslog are determined by the logging level
specified the “level” argument of the “set system syslog” CLI command. To ensure
compliance with the requirements the audit knobs detailed in [ECG] must be configured.
102. As a minimum, Junos OS records the following with each log entry:
• date and time of the event and/or reaction
• type of event and/or reaction
• subject identity (where applicable)
• the outcome (success or failure) of the event (where applicable).
103. In order to identify the key being operated on, the following details are recorded for all
administrative actions relating to cryptographic keys (generating, importing, changing and
deleting keys):
• PKID – certificate id will be recorded when generating or deleting a key pair
• SSH session keys– key reference provided by process id
• SSH keys generated for outbound trusted channel to external syslog server
• SSH keys imported for outbound trusted channel to external syslog server
• SSH key configured for SSH public key authentication –the hash of the public key that is
to be used for authentication is recorded in syslog
104. For SSH (ephemeral) session keys the PID is used as the key reference to relate the key
generation and key destruction audit events. The key destruction event is recorded as a session
disconnect event. For example, key generation and key destruction events for a single SSH
session key would be reflected by records similar to the following:
Sep 27 15:09:36 yeti sshd[6529]: Accepted publickey for root from 10.163.18.165 port 45336
ssh2: RSA SHA256:l1vri77TPQ4VaupE2NMYiUXPnGkqBWIgD5vW0OuglGI
…
Sep 27 15:09:40 yeti sshd[6529]: Received disconnect from 10.163.18.165 port 45336:11:
disconnected by user
Sep 27 15:09:40 yeti sshd[6529]: Disconnected from 10.163.18.165 port 45336
105. SSH keys generated for outbound trusted channels are uniquely identified in the audit record by
the public key filename and fingerprint. For example:
Sep 27 23:36:49 yeti ssh-keygen [67873]: Generated SSH key file /root/.ssh/id_rsa.pub with
fingerprint SHA256:g+7lsR7x4lQb1JT8Q3scfb2sOl8lyccojGdmkmw4dwM
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 45 of 50
106. SSH keys imported for use in establishing outbound trusted channels are uniquely identified in
the audit record by the hash of the key imported and the username importing (to which the key
will be bound).
107. It should be noted that SSH keys used for trusted channels are NOT deleted by mgd when SSH is
de-configured. Hence, the only time SSH keys used for trusted channels are deleted is when a
“request system zeroize” command is issued on RE1800 or “request vmhost zeroize” command
is issued on the RE-NG and the whole appliance9
is zeroized (which by definition cannot be
recorded).
108. All events recorded by syslog are timestamped. The clock function of Junos OS provides a source
of date and time information for the appliance, used in audit timestamps, which is maintained
using the hardware Time Stamp Counter as the clock source. (FAU_GEN.2, FPT_STM_EXT.1)
109. Syslog can be configured to store the audit logs locally (FAU_STG_EXT.1), and optionally to send
them to one or more syslog log servers via Netconf over SSH (FAU_STG.1,
FMT_MOF.1/Functions). Local audit log are stored in /var/log/ in the underlying filesystem.
These files are ACL protected with unauthorized access prevented. Only a Security Administrator
can read log files, or delete log and archive files through the CLI interface or through direct
access to the filesystem having first authenticated as a Security Administrator. The syslogs are
automatically deleted locally according to configurable limits on storage volume. The default
maximum size is 1Gb. The default maximum size can be modified by the user, using the “size”
argument for the “set system syslog” CLI command.
110. The Junos OS defines an active log file and a number of “archive” files (10 by default, but
configurable from 1 to 1000). When the active log file reaches its maximum size, the logging
utility closes the file, compresses it, and names the compressed archive file ‘logfile.0.gz’. The
logging utility then opens and writes to a new active log file. When the new active log file
reaches the configured maximum size, ‘logfile.0.gz’ is renamed ‘logfile.1.gz’, and the active log
file is closed, compressed, and renamed ‘logfile.0.gz’. When the maximum number of archive
files is reached and when the size of the active file reaches the configured maximum size, the
contents of the oldest archived file are deleted so the current active file can be archived.
111. A 1Gb syslog file takes approximately 0.25Gb of storage when archived. Syslog files can acquire
complete storage allocated to /var filesystem, which is platform specific. However, when the
filesystem reaches 92% storage capacity an event is raised to the administrator but the eventd
process (being a privileged process) still can continue using the reserved storage blocks. This
allows the syslog to continue storing events while the administrator frees the storage. If the
administrator does not free the storage in time and the /var filesystem storage becomes
exhausted a final entry is recorded in the log reporting “No space left on device” and logging is
terminated. The appliance continues to operate in the event of exhaustion of audit log storage
space. Events are stored locally and sent to the audit server at simultaneously.
7.6 Management
112. Accounts assigned to the Security Administrator role are used to manage Junos OS in accordance
with [NDcPP]. User accounts in the TOE have the following attributes: user identity (user name),
authentication data (password) and role (privilege). The Security Administrator is associated
with the defined login class “security-admin”, which has the necessary permission set to permit
the administrator to perform all tasks necessary to manage Junos OS in accordance with the
requirements of [NDcPP].(FMT_SMR.2)
113. The TOE provides user access either through the system console or remotely over the Trusted
Path using the SSHv2 protocol. Users are required to provide unique identification and
9
Both Guest OS and Host OS.
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 46 of 50
authentication data before any access to the system is granted, as detailed in Section 7.2 above.
(FMT_SMR.2, FMT_SMF.1)
114. The Security Administrator has the capability to:
• Administer the TOE locally via the serial ports on the physical device or remotely over an SSH
connection.
• Initiate a manual update of TOE firmware (FMT_MOF.1/ManualUpdate):
o Query currently executing version of TOE firmware (FPT_TUD_EXT.1)
o Verify update using digital signature (FPT_TUD_EXT.1)
• Manage Functions:
o Transmission of audit data to an external IT entity, including Start/stop and modify
the behaviour of the trusted communication channel to external syslog server
(netconf over SSH) and the trusted path for remote Administrative sessions (SSH)
(FMT_MOF.1/Functions, FMT_MOF.1/Services, FMT_SMF.1)
o Handling of audit data, including setting limits of log file size
(FMT_MOF.1/Functions)
• Manage TSF data (FMT_MTD,1/CoreData)
o Create, modify, delete administrator accounts, including configuration of
authentication failure parameters
o Reset administrator passwords
o Re-enable an Administrator account (FIA_AFL.1);
• Manage crypto keys (FMT_MTD.1/CryptoKeys):
o SSH key generation (ecdsa, ssh-rsa)
• Perform management functions (FMT_SMF.1):
o Configure the access banner (FTA_TAB.1)
o Configure the session inactivity time before session termination or locking, including
termination of session when serial console cable is disconnected (FTA_SSL_EXT.1,
FTA_SSL.3)
o Ability to load X.509v3 certificates to the TOE’s trust store (via the Trusted update
process, FPT_TUD_EXT.1)
o Manage cryptographic functionality (FCS_SSHS_EXT.1), including:
▪ ssh ciphers
▪ hostkey algorithm
▪ key exchange algorithm
▪ hashed message authentication code
▪ thresholds for SSH rekeying
o Set the system time (FPT_STM_EXT.1)
115. Detailed topics on the secure management of Junos OS are discussed in [ECG].
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 47 of 50
8 Rationales
8.1 SFR dependency analysis
The dependencies between SFRs implemented by the TOE are satisfied as demonstrated in [NDcPP]
Appendix E.1.
Security Functional
Requirement
Dependency Rationale
FAU_GEN.1 FPT_STM.1 FPT_STM_EXT.1 included (which is
hierarchic to FPT_STM.1)
FAU_GEN.2 FAU_GEN.1
FIA_UID.1
FAU_GEN.1 Included
Satisfied by FIA_UIA_EXT.1, which
specifies the relevant Administrator
identification timing
FAU_STG_EXT.1 FAU_GEN.1
FTP_ITC.1
FAU_GEN.1 included
FTP_ITC.1 included
FAU_STG.1 FAU_GEN.1 FAU_GEN.1 Included
FCS_CKM.1 FCS_CKM.2 or FCS_COP.1
FCS_CKM.4
FCS_CKM.2 included
FCS_CKM.4 included
FCS_CKM.2 FTP_ITC.1 or FTP_ITC.2 or
FCS_CKM.1
FCS_CKM.4
FCS_CKM.1 included (also FTP_ITC.1 as
a secure channel that could be used for
import)
FCS_CKM.4 included
FCS_CKM.4 FTP_ITC.1 or FTP_ITC.2 or
FCS_CKM.1
FCS_CKM.1 included (also FTP_ITC.1 as
a secure channel that could be used for
import)
FCS_COP.1/DataEncryption FTP_ITC.1 or FTP_ITC.2 or
FCS_CKM.1
FCS_CKM.4
FCS_CKM.1 included (also FTP_ITC.1 as
a secure channel that could be used for
import)
FCS_CKM.4 included
FCS_COP.1/SigGen FTP_ITC.1 or FTP_ITC.2 or
FCS_CKM.1
FCS_CKM.4
FCS_CKM.1 included (also FTP_ITC.1 as
a secure channel that could be used for
import)
FCS_CKM.4 included
FCS_COP.1/Hash FTP_ITC.1 or FTP_ITC.2 or
FCS_CKM.1
FCS_CKM.4
FCS_CKM.1 included (also FTP_ITC.1 as
a secure channel that could be used for
import)
FCS_CKM.4 included
FCS_COP.1/KeyedHash FTP_ITC.1 or FTP_ITC.2 or
FCS_CKM.1
FCS_CKM.4
FCS_CKM.1 included (also FTP_ITC.1 as
a secure channel that could be used for
import)
FCS_CKM.4 included
FCS_RBG_EXT.1 None n/a
FCS_SSHS_EXT.1 FCS_CKM.1
FCS_CKM.2
FCS_COP.1/DataEncryption
FCS_COP.1/SigGen
FCS_COP.1/Hash
FCS_COP.1/KeyedHash
FCS_RBG_EXT.1
FCS_CKM.1 included
FCS_CKM.2 included
FCS_COP.1/DataEncryption included
FCS_COP.1/SigGen included
FCS_COP.1/Hash included
FCS_COP.1/KeyedHash included
FCS_RBG_EXT.1 included
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 48 of 50
Security Functional
Requirement
Dependency Rationale
FIA_AFL.1 FIA_UAU.1 Satisfied by FIA_UIA_EXT.1, which
specifies the relevant Administrator
authentication
FIA_PMG_EXT.1 None n/a
FIA_UIA_EXT.1 FTA_TAB.1 FTA_TAB.1 included
FIA_UAU_EXT.2 None n/a
FIA_UAU.7 FIA_UAU.1 Satisfied by FIA_UIA_EXT.1, which
specifies the relevant Administrator
authentication
FIA_X509_EXT.1/Rev FIA_X509_EXT.2 n/a
FIA_X509_EXT.2 FIA_X509_EXT.1 n/a
FMT_MOF.1/ManualUpdate FMT_SMR.1
FMT_SMF.1
FMT_SMR.2 included
FMT_SMF.1 included
FMT_MOF.1/Services FMT_SMR.1
FMT_SMF.1
FMT_SMR.2 included
FMT_SMF.1 included
FMT_MOF.1/Functions FMT_SMR.1
FMT_SMF.1
FMT_SMR.2 included
FMT_SMF.1 included
FMT_MTD.1/CoreData FMT_SMR.1
FMT_SMF.1
FMT_SMR.2 included
FMT_SMF.1 included
FMT_MTD.1/CryptoKeys FMT_SMR.1
FMT_SMF.1
FMT_SMR.2 included
FMT_SMF.1 included
FMT_SMF.1 None n/a
FMT_SMR.2 FIA_UID.1 Satisfied by FIA_UIA_EXT.1, which
specifies the relevant Administrator
authentication
FPT_SKP_EXT.1 None n/a
FPT_APW_EXT.1 None n/a
FPT_TST_EXT.1 None n/a
FPT_TUD_EXT.1 FCS_COP.1/SigGen or
FCS_COP.1/Hash
FCS_COP.1/SigGen
FPT_TUD_EXT.2 FPT_TUD_EXT.1 FPT_TUD_EXT.1 included
FPT_STM_EXT.1 None n/a
FTA_SSL_EXT.1 FIA_UID.1 Satisfied by FIA_UIA_EXT.1, which
specifies the relevant Administrator
authentication
FTA_SSL.3 None n/a
FTA_SSL.4 None n/a
FTA_TAB.1 None n/a
FTP_ITC.1 None n/a
FTP_TRP.1/Admin None n/a
Table 10 SFR Dependency Analysis
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 49 of 50
9 Glossary
AES Advanced Encryption Standard
ANSI American National Standards Institute
API Application Program Interface
cPP collaborative Protection Profile
CCM Counter with Cipher Block Chaining-Message Authentication Code
CFP C Form-factor Pluggable
CSP Critical security parameter
DH Diffie Hellman
EAL Evaluation Assurance Level
ECC Elliptic Curve Cryptography
ECDSA Elliptic Curve Digital Signature Algorithm
EP Extended Package, defined in [CC1]
FFC Finite Field Cryptography
FIPS Federal Information Processing Standard
HMAC Keyed-Hash Authentication Code
I&A Identification and Authentication
ID Identification
IETF Internet Engineering Task Force
IKE Internet Key Exchange
IP Internet Protocol
IPsec Internet Protocol Security
IPv6 Internet Protocol Version 6
ISAKMP Internet Security Association and Key Management Protocol
ISO International Organization for Standardization
IT Information Technology
Junos Juniper Operating System
MIC Modular Interface Cards
MPC Modular Port Concentrator
NAT Network Address Translation
NDcPP Network Device collaborative Protection Profile
NTP Network Time Protocol
OSI Open Systems Interconnect
OSP Organizational Security Policy
PAM Pluggable Authentication Module
PFE Packet Forwarding Engine
PIC/PIM Physical Interface Card/Module
PKI Public Key Infrastructure
POE Power over Ethernet
PP Protection Profile
PRNG Pseudo Random Number Generator
RE Routing Engine
RE-NG Next Generation RE
RFC Request for Comment
RNG Random Number Generator
RSA Rivest, Shamir, Adelman
SA Security Association
SFP Small Form-factor Pluggable
SFR Security Functional Requirement
SHA Secure Hash Algorithm
Security Target Junos OS 18.1R3 for MX240, MX480, MX960, MX2008, MX2010, MX2020, EX9204,
EX9208 and EX9214 Juniper Networks
Version 1.4 Page 50 of 50
SNMP Simple Network Management Protocol
SSH Secure Shell
SSL Secure Sockets Layer
ST Security Target
TOE Target of Evaluation
TSF TOE Security Functionality
TSFI TSF interfaces
UDP User Datagram Protocol
VPN Virtual Private Network
VPNEP Virtual Private Network Extended Package