TÜV Rheinland Nederland B.V.
Headoffice:
Westervoortsedijk 73
NL-6827 AV Arnhem
P.O. Box 2220
NL-6802 CE Arnhem
The Netherlands
Location Leek:
Eiberkamp 10
NL-9351 VT Leek
P.O. Box 37
NL-9350 AA Leek
The Netherlands
info@nl.tuv.com
www.tuv.com/nl
Tel. +31 (0)88 888 7 888
Fax +31 (0)88 888 7 879
TÜV Rheinland Nederland B.V. is a
registered company at the Dutch
Chamber of Commerce under
number 27288788
VAT number: NL815820380B01
IBAN: NL61DEUT0265155096
Version
2017-2
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
Certification Report
NXP Secure Smart Card Controller P40C008/012/024/040/072
VE.001
Sponsor and developer: NXP Semiconductors GmbH, Business Unit
Security & Connectivity
Stresemannallee 101
22505 Hamburg
Germany
Evaluation facility: Brightsight
Delftechpark 1
2628 XJ Delft
The Netherlands
Reportnumber: NSCIB-CC-65655-CR2
Report version: 2
Projectnumber: 65655
Author(s): Wouter Slegers
Date: 03 May 2017
Number of pages: 14
Number of appendices: 0
Reproduction of this report is authorized provided the report is reproduced in its entirety.
Page: 3/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
CONTENTS:
Foreword 4
Recognition of the certificate 5
International recognition 5
European recognition 5
1 Executive Summary 6
2 Certification Results 7
2.1 Identification of Target of Evaluation 7
2.2 Security Policy 7
2.3 Assumptions and Clarification of Scope 8
2.4 Architectural Information 8
2.5 Documentation 8
2.6 IT Product Testing 9
2.7 Re-used evaluation results 11
2.8 Evaluated Configuration 11
2.9 Results of the Evaluation 11
2.10 Comments/Recommendations 11
3 Security Target 13
4 Definitions 13
5 Bibliography 14
Page: 4/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
Foreword
The Netherlands Scheme for Certification in the Area of IT Security (NSCIB) provides a third-party
evaluation and certification service for determining the trustworthiness of Information Technology (IT)
security products. Under this NSCIB, TÜV Rheinland Nederland B.V. has the task of issuing
certificates for IT security products, as well as for protection profiles and sites.
Part of the procedure is the technical examination (evaluation) of the product, protection profile or site
according to the Common Criteria assessment guidelines published by the NSCIB. Evaluations are
performed by an IT Security Evaluation Facility (ITSEF) under the oversight of the NSCIB Certification
Body, which is operated by TÜV Rheinland Nederland B.V. in cooperation with the Ministry of the
Interior and Kingdom Relations.
An ITSEF in the Netherlands is a commercial facility that has been licensed by TÜV Rheinland
Nederland B.V. to perform Common Criteria evaluations; a significant requirement for such a license is
accreditation to the requirements of ISO Standard 17025 “General requirements for the accreditation
of calibration and testing laboratories”.
By awarding a Common Criteria certificate, TÜV Rheinland Nederland B.V. asserts that the product or
site complies with the security requirements specified in the associated (site) security target, or that
the protection profile (PP) complies with the requirements for PP evaluation specified in the Common
Criteria for Information Security Evaluation. A (site) security target is a requirements specification
document that defines the scope of the evaluation activities.
The consumer should review the (site) security target or protection profile, in addition to this
certification report, in order to gain an understanding of any assumptions made during the evaluation,
the IT product's intended environment, its security requirements, and the level of confidence (i.e., the
evaluation assurance level) that the product or site satisfies the security requirements stated in the
(site) security target.
Reproduction of this report is authorized provided the report is reproduced in its entirety.
Page: 5/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
Recognition of the certificate
Presence of the Common Criteria Recognition Arrangement and SOG-IS logos on the certificate
indicates that this certificate is issued in accordance with the provisions of the CCRA and the SOG-IS
agreement and will be recognised by the participating nations.
International recognition
The CCRA has been signed by the Netherlands in May 2000 and provides mutual recognition of
certificates based on the CC. Starting September 2014 the CCRA has been updated to provide mutual
recognition of certificates based on cPPs (exact use) or STs with evaluation assurance levels up to
and including EAL2+ALC_FLR. The current list of signatory nations and approved certification
schemes can be found on: http://www.commoncriteriaportal.org.
European recognition
The European SOGIS-Mutual Recognition Agreement (SOGIS-MRA) version 3 effective from April
2010 provides mutual recognition of Common Criteria and ITSEC certificates at a basic evaluation
level for all products. A higher recognition level for evaluation levels beyond EAL4 (resp. E3-basic) is
provided for products related to specific technical domains. This agreement was initially signed by
Finland, France, Germany, The Netherlands, Norway, Spain, Sweden and the United Kingdom. Italy
joined the SOGIS-MRA in December 2010. The current list of signatory nations, approved certification
schemes and the list of technical domains for which the higher recognition applies can be found on:
http://www.sogisportal.eu.
Page: 6/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
1 Executive Summary
This Certification Report states the outcome of the Common Criteria security evaluation of the NXP
Secure Smart Card Controller P40C008/012/024/040/072 VE.001. The developer of the NXP Secure
Smart Card Controller P40C008/012/024/040/072 VE.001 is NXP Semiconductors GmbH, Business
Unit Security & Connectivity located in Hamburg, Germany and they also act as the sponsor of the
evaluation and certification). A Certification Report is intended to assist prospective consumers when
judging the suitability of the IT security properties of the product for their particular requirements.
The Target of Evaluation (TOE) is a hardware secure smart card controller IC with IC Dedicated
software. A Smartcard Embedded Software developer may create Security IC Embedded Software to
execute on the NXP Secure Smart Card Controller P40C008/012/024/040/072 VE.001 hardware. This
software is stored in arbitrary memory of the NXP Secure Smart Card Controller
P40C008/012/024/040/072 VE.001 hardware and is not part of the TOE.
The TOE provides a hardware co-processor for Triple-DES (3DES) and AES (not in the evaluated
scope), an AIS31-compliant True Random Number Generator (TRNG), a memory management unit
(MMU) for access control management and ISO/IEC 7816 contact interface with UART.
The TOE also contains IC Dedicated software which provides support functionalities such as basic
NVM access, Post-Delivery Configuration feature, self-testing, error counter handling and TOE reset.
The TOE has been originally evaluated by Brightsight B.V. located in Delft, The Netherlands and was
certified on 18 August 2015. The re-evaluation also took place by Brightsight B.V. and was completed
on 3 May 2017 with the approval of the ETR. The re-certification procedure has been conducted in
accordance with the provisions of the Netherlands Scheme for Certification in the Area of IT Security
[NSCIB].
This Certification Report is a re-certification with major change.
The major changes are reduction of variants (VD hardware and the VE hardware with 000 software
are no longer included) and exclusion of the AES functionality from the evaluation scope. Small
changes to the guidance to address these changes are also included.
The security evaluation re-used the evaluation results of previously performed evaluations. A full, up to
date vulnerability analysis has been made, as well as renewed testing.
The scope of the evaluation is defined by the security target [ST], which identifies assumptions made
during the evaluation, the intended environment for the NXP Secure Smart Card Controller
P40C008/012/024/040/072 VE.001, the security requirements, and the level of confidence (evaluation
assurance level) at which the product is intended to satisfy the security requirements. Consumers of
the NXP Secure Smart Card Controller P40C008/012/024/040/072 VE.001 are advised to verify that
their own environment is consistent with the security target, and to give due consideration to the
comments, observations and recommendations in this certification report.
The results documented in the evaluation technical report [ETR]1 for this product provide sufficient
evidence that it meets the EAL5 augmented (EAL5+) assurance requirements for the evaluated
security functionality. This assurance level is augmented with ALC_DVS.2 (Sufficiency of security
measures), ASE_TSS.2 (TOE summary specification with architectural design summary), and
AVA_VAN.5 (Advanced methodical vulnerability analysis).
The evaluation was conducted using the Common Methodology for Information Technology Security
Evaluation, Version 3.1 Revision 4 [CEM], for conformance to the Common Criteria for Information
Technology Security Evaluation, version 3.1 Revision 4 [CC].
TÜV Rheinland Nederland B.V., as the NSCIB Certification Body, declares that the NXP Secure Smart
Card Controller P40C008/012/024/040/072 VE.001 evaluation meets all the conditions for international
recognition of Common Criteria Certificates and that the product will be listed on the NSCIB Certified
Products list. It should be noted that the certification results only apply to the specific version of the
product as evaluated.
1 The Evaluation Technical Report contains information proprietary to the developer and/or the
evaluator, and is not releasable for public review.
Page: 7/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
2 Certification Results
2.1 Identification of Target of Evaluation
The Target of Evaluation (TOE) for this evaluation is the NXP Secure Smart Card Controller
P40C008/012/024/040/072 VE.001 from NXP Semiconductors GmbH, Business Unit Security &
Connectivity located in Hamburg, Germany.
The TOE is comprised of the following main components:
Type Name Release Date Form of delivery
IC Hardware P40C008/012/024/040/072 VE VE 2015-02-16 Wafer, module (dice have
nameplate 9511E)
IC Dedicated
Test Software
Test Software 01h 2017-03-01 Stored in ROM
IC Dedicated
Support Software
Boot Software 01h 2017-03-01 Stored in ROM
HAL Software 01h 2017-03-01 Stored in ROM
To ensure secure usage a set of guidance documents is provided together with the NXP Secure
Smart Card Controller P40C008/012/024/040/072 VE.001. Details can be found in section 2.5 of this
report.
The TOE is delivered by NXP as a wafer in phase 3 or in packaged form in phase 4 of the smart card
life cycle as defined in the Smart Card IC Protection Profile [PP-0084]. Security IC Embedded
Software (not part of the TOE) can be loaded in ROM in Phase 3.
2.2 Security Policy
A Security IC must provide high security in particular when being used in the banking and finance
market, in electronic commerce or in governmental applications.
Hence the TOE shall maintain:
Ø the integrity and the confidentiality of code and data stored in its memories,
Ø the different CPU modes with the related capabilities for configuration and memory access,
Ø the integrity, the correct operation and the confidentiality of security functionality provided by
the TOE.
This is ensured by the construction of the TOE and its security functionality.
NXP Secure Smart Card Controller P40C008/012/024/040/072 VE.001 basically provides a hardware
platform for an implementation of a smart card application with
Ø functionality to calculate Data Encryption Standard (Triple-DES) with up to three keys,
Ø a True Random Number Generator,
Ø memory management control, and
Ø an ISO/IEC 7816 contact interface with UART.
In addition, several security mechanisms are implemented to ensure proper operation as well as
integrity and confidentiality of stored data. For example, this includes security mechanisms for memory
protection and security exceptions as well as sensors, which allow operation under specified
conditions only. Memory encryption is used for memory protection and chip shielding is added to the
chip.
Hardware support to calculate Advanced Encryption Standard (AES) with different key lengths, large
integer arithmetic operations like multiplication, addition and logical operations, which are suitable for
public key cryptography and elliptic curve cryptography, as well as support for cyclic redundancy
check (CRC) calculation, is functionally in the TOE, however not part of the claimed security
functionality.
Page: 8/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
2.3 Assumptions and Clarification of Scope
2.3.1 Assumptions
The Assumptions defined in the Security Target are not covered by the TOE itself. These aspects lead
to specific Security Objectives to be fulfilled by the TOE-Environment. The following objectives for the
environment are of relevance:
Ø OE.Plat-Appl: Usage of Hardware Platform
Ø OE.Resp-Appl: Treatment of User Data
Ø OE.Process-Sec-IC: Protection during Packaging, Finishing and Personalisation
Ø OE.Check-Init: Check of initialization data by the Security IC Embedded Software
Details can be found in the Security Target [ST] sections 4.2 and 4.3.
2.3.2 Clarification of scope
The evaluation did not reveal any threats to the TOE that are not countered by the evaluated security
functions of the product.
Please note that although the TOE contains accelerators for AES, CRC and large number arithmetic,
the functionality and security of these features has not been topic of this evaluation. Composite
product developers should do their own security analysis and/or testing.
2.4 Architectural Information
The target of evaluation (TOE) is a Security IC with Dedicated Test Software and Dedicated Support
Software.
The TOE does not include any Security IC Embedded Software. See [ST] section 1.4 for details.
2.5 Documentation
The following documentation is provided with the product by the developer to the customer:
Type Name Release Date Form of
delivery
Document Product data sheet SmartMX2 P40 family
P40C008/012/024/040/072, Secure high
performance smart card controller, NXP
Semiconductors
262936 2017-02-16 Electronic
document
Document Product data sheet addendum SmartMX2 P40
family P40Cxxx, Firmware interface
specification, NXP Semiconductors
275836 2017-03-10 Electronic
document
Document Product data sheet addendum SmartMX2 P40
family P40Cxxx, User Mode, NXP
Semiconductors
275733 2016-06-17 Electronic
document
Document Product data sheet addendum SmartMX2 P40
family P40Cxxx, System Mode, NXP
Semiconductors
267531 2016-06-17 Electronic
document
Document Product data sheet addendum SmartMX2 P40
family P40Cxxx, Chip Health Mode, NXP
Semiconductors
269730 2015-04-01 Electronic
document
Document Product data sheet addendum SmartMX2 P40
family P40Cxxx, Post Delivery Configuration,
NXP Semiconductors
269630 2015-04-01 Electronic
document
Document Product data sheet addendum SmartMX2 P40
family P40Cxxx, Instruction Set Manual, NXP
258132 2015-06-26 Electronic
Page: 9/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
Type Name Release Date Form of
delivery
Semiconductors document
Document Product data sheet addendum SmartMX2 P40
family P40Cxxx VA, VD, and VE, Wafer
specification, NXP Semiconductors
269832 2015-05-30 Electronic
document
Document Guidance and Operation Manual NXP Secure
Smart Card Controller
P40C008/012/024/040/072, Information on
Guidance and Operation, NXP
Semiconductors
269433 2017-02-24 Electronic
document
2.6 IT Product Testing
Testing (depth, coverage, functional tests, independent testing): The evaluators examined the
developer’s testing activities documentation and verified that the developer has met their testing
responsibilities.
2.6.1 Testing approach and depth
The developer has performed extensive testing on functional specification, subsystem and module
level. All parameter choices have been addressed at least once. All boundary cases identified have
been tested explicitly, and additionally the near-boundary conditions have been covered
probabilistically. The testing was largely automated using industry standard and proprietary test suites.
Test scripts were extensively used to verify that the functions return the expected values.
The hardware test results are extendable to composite evaluations on this hardware TOE, as the
hardware is operated according to its guidance and the composite evaluation requirements are met.
For the testing performed by the evaluators, the developer has provided a testing environment. The
evaluator has not repeated the developer tests, but found the tests to be identical to the tests of the
baseline evaluations. As implementation remains unchanged between the previous certified TOE, no
tests have been added for this re-certification.
2.6.2 Independent Penetration Testing
The re-certification of the TOE is done by performing a new vulnerability assessment according to the
latest security standards. The vulnerability of the TOE for these attacks has been analysed in a white
box investigation conforming to AVA_VAN.5.
1. Inventory of required resistance
The reference for attack techniques against which smart card-related devices controllers such
as the TOE must be protected against is the document "Attack methods for smart cards" [JIL-
AM]. Also the Brightsight attack lists for several algorithms have been used, and Brightsight’s
latest improvements in evaluation techniques have been considered.
2. Validation of security functionalities
This step identifies the implemented security functionalities and performs tests to verify
implementation and to validate proper functioning. This step has been performed as part of
ATE evaluation, and was fully re-used from the previous re-certification of the TOE.
3. Vulnerability analysis
This step first gives an overview against which attacks the implemented security functionalities
are meant to provide protection. Secondly in this step the design of the implemented security
functionalities is studied. Thirdly, an analysis is performed to determine whether the design
contains vulnerabilities against the respective attacks of step 1.
The CC re-certification is done in parallel with an EMVCo renewal for this TOE. Both activities
are performed within Brightsight, and the same vulnerability analysis is used for both, the
EMVCo renewal, and the CC re-certification with regards to the claims made for this TOE, and
Page: 10/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
where the TOE scope allows for it.
The results of the vulnerability analysis are presented to the certifier in a meeting, including the
test plan, and have been updated based on comments and input from the scheme. This step
has been performed as part of AVA evaluation.
4. Analysis of input from other evaluation activities
During the course of the evaluation the developer decided to modify the TOE, which resulted
in an update of the [ST]. The updated [ST] was evaluated and taken along as input in the AVA
evaluation and was found not to affect other CC classes.
5. Design assurance evaluation
This step analyses the results from an attack perspective as defined in step 1. Based on this
design analysis the evaluators determine whether the design provides sufficient assurance or
whether penetration testing is needed to provide sufficient assurance. This step has been
performed as part of AVA evaluation.
6. Penetration testing
This step performs the penetration tests identified in step 3. This step has been performed as
part of AVA evaluation.
Note that tests have been performed on a sample that is slightly different from the actual TOE.
The difference is in a part that is only accessed in test mode, which is not accessible or
available to the end user, and is extensively analysed. The results of this analysis have been
presented to the certifier in a meeting.
7. Conclusions on resistance
This step performs a [JIL-AM] compliant rating on the results of the penetration tests in relation
with the assurance already gained by the design analysis. Based on the ratings the evaluators
draw conclusions on the resistance of the TOE against attackers possessing a high attack
potential. This step has been performed as part of AVA evaluation.
In total 13 weeks of testing effort was spent on 1 EMFI, 2 light manipulation, and side channel analysis
attack scenarios.
2.6.3 Test Configuration
Testing was performed on the P40C008/012/024/040/072 VE with the v00 software, in the 072
configuration. As the change of software between v00 and v01 has no impact on the test results, the
test results apply to the TOE.
2.6.4 Testing Results
The testing activities, including configurations, procedures, test cases, expected results and observed
results are summarised in the [ETR], with references to the documents containing the full details.
The developer’s tests and the independent functional tests produced the expected results, giving
assurance that the TOE behaves as specified in its ST and functional specification.
No exploitable vulnerabilities were found with the independent penetration tests.
The algorithmic security level of cryptographic functionality has not been rated in this certification
process, but the current consensus on the algorithmic security level in the open domain, i.e. from the
current best cryptanalytic attacks published, has been taken into account.
The algorithmic security level exceeds 80 bits for all evaluated cryptographic functionality as required
for high attack potential (AVA_VAN.5).
The strength of the implementation of the cryptographic functionality has been assessed in the
evaluation, as part of the AVA_VAN activities. These activities revealed that for all cryptographic
functionality the security level exceeds 80 bits.
For composite evaluations, please consult the [ETRfC] for details.
Page: 11/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
2.7 Re-used evaluation results
This security evaluation is a new evaluation under NSCIB. Documentary evaluation results of the
earlier version (the VD and VE hardware versions, v00 software version) of the TOE have been re-
used, but vulnerability analysis and penetration testing has been renewed.
There has been extensive re-use of the ALC aspects for the sites, by use of two site certificates and
eight times site re-use report approaches. No sites have been visited as part of this evaluation.
2.8 Evaluated Configuration
The TOE is defined uniquely by its name and version number NXP Secure Smart Card Controller
P40C008/012/024/040/072 VE.001.
All major configurations as well as all minor configuration options that can be selected are described in
chapter 1.4.2 of the [ST]. All major and minor configurations are available to the evaluator. Besides the
size of the available EEPROM memory, there are no differences between the major configurations.
The major configurations do not have dependencies to security features. All minor configuration
options that are part of the evaluation were tested and behave as specified.
Therefore the results described in this document are applicable for the major configurations P40C008,
P40C012, P40C024, P40C040, and P40C072, in the VE edition, as well as for all minor configurations
described in the [ST].
Note that although AES is present and available for the TOE user in case the minor configuration
option for AES is set, AES is out of scope of this evaluation, and no claims regarding resistance
against attackers are made.
2.9 Results of the Evaluation
The evaluation lab documented their evaluation results in the [ETR]2 which references several
Intermediate Reports and other evaluator documents. To support composite evaluations according to
[CCDB-2007-09-01] a derived document [ETRfC] was provided and approved. This document
provides details of the TOE evaluation that have to be considered when this TOE is used as platform
in a composite evaluation.
The verdict of all claimed assurance requirements is: Pass.
Based on the above evaluation results the evaluation lab concluded the NXP Secure Smart Card
Controller P40C008/012/024/040/072 VE.001, to be CC Part 2 extended, CC Part 3 conformant,
and to meet the requirements of EAL 5 augmented with ALC_DVS.2, ASE_TSS.2 and AVA_VAN.5.
This implies that the product satisfies the security technical requirements specified in Security Target
[ST].
The Security Target claims strict conformance to the Protection Profile [PP-0084]. No Augmentation
Packages from the PP have been used.
2.10 Comments/Recommendations
The user guidance as outlined in section 2.5 contains necessary information about the usage of the
TOE. Certain aspects of the TOE’s security functionality, in particular the countermeasures against
attacks, depend on accurate conformance to the user. There are no particular obligations or
recommendations for the user apart from following the user guidance. Please note that the documents
contain relevant details with respect to the resistance against certain attacks.
Please note that although the TOE contains accelerators for AES, CRC and large number arithmetic,
the functionality and security of these features has not been topic of this evaluation. Composite
product developers should do their own security analysis and/or testing.
In addition all aspects of assumptions, threats and policies as outlined in the Security Target not
covered by the TOE itself need to be fulfilled by the operational environment of the TOE.
2 The Evaluation Technical Report contains information proprietary to the developer and/or the
evaluator, and is not releasable for public review.
Page: 12/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
The customer or user of the product shall consider the results of the certification within his system risk
management process. In order for the evolution of attack methods and techniques to be covered, he
should define the period of time until a re-assessment for the TOE is required and thus requested from
the sponsor of the certificate.
The strength of the implemented cryptographic algorithms was not rated in the course of this
evaluation. To fend off attackers with high attack potential appropriate cryptographic algorithms with
adequate key lengths must be used (references can be found in national and international documents
and standards).
Page: 13/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
3 Security Target
The NXP Secure Smart Card Controllers P40C008/012/024/040/072 VE.001 Security Target, Rev.
2.2, 2017-03-10 [ST] is included here by reference.
Please note that for the need of publication a public version (NXP Secure Smart Card Controller
P40C008/012/024/040/072 VE.001 Security Target Lite, Rev. 1.5, 2017-03-10) [ST-lite] has been
created and verified according to [ST-SAN].
4 Definitions
This list of Acronyms and the glossary of terms contains elements that are not already defined by the
CC or CEM:
AES Advanced Encryption Standard
CRC Cyclic Redundancy Check
DES Data Encryption Standard
IC Integrated Circuit
IT Information Technology
ITSEF IT Security Evaluation Facility
NSCIB Nederlands Schema voor Certificatie op het gebied van IT-Beveiliging
PP Protection Profile
TRNG True Random Number Generator
TOE Target of Evaluation
Page: 14/14 of report number: NSCIB-CC-65655-CR2, dated 03 May 2017
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
5 Bibliography
This section lists all referenced documentation used as source material in the compilation of this
report:
[AIS31] AIS31: Funktionalitätsklassen und Evaluationsmethodologie für physikalische
Zufallszahlengeneratoren, Bundesamt für Sicherheit in der Informationstechnik.
Version 2.0, September 18, 2011.
[PP-0084] Security IC Platform Protection Profile with Augmentation Packages", reference
BSI-CC-PP-0084-2014, version 1.0, 13.01.2014.
[CC] Common Criteria for Information Technology Security Evaluation, Parts I, II and III,
Version 3.1 Revision 4, September 2012.
[CEM] Common Methodology for Information Technology Security Evaluation, Version 3.1
Revision 4, September 2012.
[ETR] Brightsight, Evaluation Technical Report NXP Secure Smart Card Controller
P40C008/012/024/040/072 VE.001 EAL5+, 17-RPT-136 v3.0, dated 03 May 2017.
[ETRfC] Brightsight, Evaluation Technical Report for Composition NXP Secure Smart Card
Controller P40C008/012/024/040/072 VE.001 EAL5, 17-RPT-137 v3.0, dated 03
May 2017.
[JIL] JIL Application of Attack Potential to Smartcards, version 2.9, January 2013.
[NSCIB] Netherlands Scheme for Certification in the Area of IT Security, Version 2.2,
August 10th, 2015.
[ST] NXP Secure Smart Card Controllers P40C008/012/024/040/072 VE.001 Security
Target, Rev. 2.2, 2017-03-10
[ST-lite] NXP Secure Smart Card Controller P40C008/012/024/040/072 VE.001 Security
Target Lite, Rev. 1.5, 2017-03-10
[ST-SAN] ST sanitising for publication, CC Supporting Document CCDB-2006-04-004, April
2006.
(This is the end of this report).