Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 W McAfee Security Target McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Document Version 1.0 February 21, 2012 Document Version 1.0 © McAfee Page 1 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Prepared For: Prepared By: McAfee KpexA cATee pexAssurance —— G R O U P——— McAfee, Inc. Apex Assurance Group, LLC 2821 Mission College Blvd. 530 Lytton Avenue, Ste. 200 Santa Clara, CA 95054 Palo Alto, CA 94301 www.mcafee.com www.apexassurance.com Abstract This document provides the basis for an evaluation of a specific Target of Evaluation (TOE), the Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6. This Security Target (ST) defines a set of assumptions about the aspects of the environment, a list of threats that the product intends to counter, a set of security objectives, a set of security requirements and the IT security functions provided by the TOE which meet the set of requirements. Document Version 1.0 McAfee Page 2 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Table of Contents 1 Introduction .. 1.1 ST Reference. 1.2 TOE Reference. 1.3 Document Organization... 1.4 Document Conventions 1.5 Document Terminology 1.6 TOE Overview.. 1.6.1 Host DLP Policy Manager Console 1.6.2 Host DLP Agent 1.6.3 Host DLP Monitoi 1.7 TOE Description... 1.7.1 Physical Boundary... 1.7.2 Hardware and Software Supplied by the IT Environment. 1.7.3 Logical Boundary... 1.8 Rationale for Non-bypassability and Separation of the TOE... 2 Conformance Claims... 2.1 Common Criteria Conformance Claim..... 2.2 Protection Profile Conformance Claim... 3 Security Problem Definition 3.1 Threats ... 3.2 Organizational Security Policies 3.3 Assumptions .... 4 Security Objectives. 4.1 Security Objectives for the TOE .. 4.2 Security Objectives for the Operational Environment 4.3 Security Objectives Rationale … 5 Extended Components Definition 6 Security Requirements ..... . 6.1 Security Functional Requirements 6.1.1 Security Audit (FAU) 6.1.2 Information Flow Control (FDP)... 6.1.3 Identification and Authentication (FIA) . 6.14 Security Management (FMT) 6.1.5 Protection of the TSF (FPT) 6.2 Security Assurance Requirements ..... 6.3 CC Component Hierarchies and Dependencies.. 6.4 Security Requirements Rationale... 6.4.1 Security Functional Requirements for the TOE... 6.4.2 Security Assurance Requirements 6.5 TOE Summary Specification Rationale .... 7 TOE Summary Specification Document Version 1.0 © McAfee Page 3 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 7.1 Policy Enforcement... 7.2 Identification... 7.3 Management... 7.3.1 ePO User Account Managemen 7.3.2 Permission Set Management... 7.3.3 Audit Log Management 7.3.4 Event Log Management... 7.3.5 Notification Management 7.3.6 Event Filtering Management. 7.3.7 System Tree Management. 7.3.8 DLP Policy Management .. 7.3.9 Query Management. 7.3.10 Dashboard Management .... 7.4 Audit... 7.5 System Information Import . List of Tables Table 1 — ST Organization and Section Descriptions ... Table 2 - Terms and Acronyms Used in Security Target Table 3 — Evaluated Configuration for the TOE ..... Table 4 - Management System Component Requirements..... Table 5 - Supported Agent Platforms Table 6 — Agent Platform Hardware Requirements .... Table 7 — Logical Boundary Descriptions. Table 8 — Threats Addressed by the TOE..... Table 9 — Organizational Security Policies... Table 10 — Assumptions... Table 11 — TOE Security Objectives Table 12 — Operational Environment Security Objectives... Table 13 — Mapping of Assumptions, Threats, and OSPs to Security Objectives .. Table 14 - Rationale for Mapping of Threats, Policies, and Assumptions to Objectives... Table 15 - TOE Functional Components. Table 16 - Audit Events and Details .. Table 17 - TSF Data Access Permissions. Table 18 - Security Assurance Requirements at EAL2 ... Table 19 - TOE SFR Dependency Rationale.... Table 20 - Mapping of TOE SFRs to Security Objectives Document Version 1.0 McAfee Page 4 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Table 21 — Rationale for Mapping of TOE SFRs to Objectives Table 22 - Security Assurance Measures Table 23 — SFR to TOE Security Functions Mapping .... Table 24 — SFR to TSF Rationale. Table 25 - Rules and their actions Table 26 - Predefined DLP Dashboards... Table 27 — Predefined DLP Event Reports... List of Figures Figure 1— TOE Boundary... Document Version 1.0 McAfee Page 5 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 1 Introduction This section identifies the Security Target (ST), Target of Evaluation (TOE), Security Target organization, document conventions, and terminology. It also includes an overview of the evaluated product. 1.1 ST Reference ST Title Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 ST Revision 1.0 ST Publication Date Author February 21, 2012 Apex Assurance Group 1.2 TOE Reference TOE Reference TOE Type McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Data Loss Prevention 1.3 Document Organization This Security Target follows the following format: EN TITLE | DESCRIPTION 1 Introduction Provides an overview of the TOE and defines the hardware and software that make up the TOE as well as the physical and logical boundaries of the TOE 2 Conformance Claims Lists evaluation conformance to Common Criteria versions, Protection Profiles, or Packages where applicable 3 Security Problem Definition Specifies the threats, assumptions and organizational security policies that affect the TOE 4 Security Objectives Defines the security objectives for the TOE/operational environment and provides a rationale to demonstrate that the security objectives satisfy the threats 5 Extended Components Describes extended components of the evaluation (if any) Definition 6 Security Requirements Contains the functional and assurance requirements for this TOE 7 TOE Summary Specification Identifies the IT security functions provided by the TOE and also identifies the assurance measures targeted to meet the assurance requirements. Document Version 1.0 © McAfee Page 6 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Table 1 - ST Organization and Section Descriptions 1.4 Document Conventions The notation, formatting, and conventions used in this Security Target are consistent with those used in Version 3.1 of the Common Criteria. Selected presentation choices are discussed here to aid the Security Target reader. The Common Criteria allows several operations to be performed on functional requirements: The allowable operations defined in Part 2 of the Common Criteria are refinement, selection, assignment and iteration. * The assignment operation is used to assign a specific value to an unspecified parameter, such as the length of a password. An assignment operation is indicated by italicized text. * The refinement operation is used to add detail to a requirement, and thus further restricts a requirement. Refinement of security requirements is denoted by bold text. Any text removed is indicated with a strikethrough format (Example: TSF). * The selection operation is picking one or more items from a list in order to narrow the scope of a component element. Selections are denoted by underlined text. ¢ Iterated functional and assurance requirements are given unique identifiers by appending to the base requirement identifier from the Common Criteria an iteration number inside parenthesis, for example, FIA_UAU.1.1 (1) and FIA_UAU.1.1 (2) refer to separate instances of the FIA_UAU.1 security functional requirement component. Outside the SFRs, italicized text is used for both official document titles and text meant to be emphasized more than plain text. 1.5 Document Terminology The following table’ describes the terms and acronyms used in this document: AD Active Directory cc Common Criteria version 3.1 (ISO/IEC 15408) CPU Central Processing Unit DBMS DataBase Management System EAL Evaluation Assurance Level ePO ePolicy Orchestrator GUI Graphical User Interface I&A Identification & Authentication ls Internet Information Services IP Internet Protocol IT Information Technology * Derived from the IDSPP Document Version 1.0 McAfee Page 7 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 JDBC Java DataBase Connectivity MAC Media Access Control MDAC Microsoft Data Access Components MSDE MS Data Engine NTFS New Technology File System NTP Network Time Protocol OEM Original Equipment Manufacturer Os Operating System OSP Organizational Security Policy PDC Primary Domain Controller PP Protection Profile RAM Random Access Memory SCAP Security Content Automation Protocol SF Security Function SFP Security Function Policy SFR Security Functional Requirement SMTP Simple Mail Transfer Protocol SNMP Simple Network Mail Protocol SOF Strength Of Function SP Service Pack SQL Structured Query Language SSL Secure Socket Layer ST Security Target TOE Target of Evaluation TSC TOE Scope of Control TSF TOE Security Function TSP TOE Security Policy VGA Video Graphics Array XML eXtensible Markup Language Table 2 - Terms and Acronyms Used in Security Target 1.6 TOE Overview McAfee Host Data Loss Prevention software protects enterprises from the risk associated with unauthorized transfer of data from within or outside the organization. Data loss is defined as confidential or private information leaving the enterprise as a result of unauthorized communication through channels such as applications, physical devices, or network protocols. Seamless integration with McAfee ePolicy Orchestrator® (ePO™) eases agent deployment, management, and reporting. ePO provides the user interface for the TOE via a GUI accessed from remote systems using web browsers. Custom reports can be fully automated, scheduled, or exported. ePO requires the user to identify and authenticate themselves before access is granted to any data or management functions. Audit records are generated to record configuration changes made by users. The audit Document Version 1.0 © McAfee Page 8 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 records may be reviewed via the GUI. Users can review the results of the DLP policy audits via ePO and the Host DLP Monitor. Access to this information is again limited by per-user permissions. The following sections provide a summary of the specific TOE sub-components. Note that communication between the distributed components of the TOE is protected from disclosure and modification by cryptographic functionality provided by the operational environment. 1.6.1 Host DLP Policy Manager Console The Host DLP Policy Manager console is the interface where the administrator defines and enforces the enterprise information security policy. It is used to create the information security policy and administer the McAfee Host Data Loss Prevention components. The Host DLP Policy Manager console is accessed from the ePolicy Orchestrator Menu and run locally on the administrative management workstation. Events that are generated by the DLP Agents are sent to the ePO Event Parser, and recorded in tables in the ePO database. Events are stored in the database for further analysis and used by other system components. 1.6.2 Host DLP Agent The DLP Agents reside on enterprise computers, which are referred to as managed computers, and enforces the policies defined in the Host DLP Policy Manager. The agents audit user activities to monitor, control, and prevent unauthorized users from copying or transferring sensitive data. They also generate events recorded by the ePO Event Parser. 1.6.3 Host DLP Monitor Events that are sent to the DLP Event Parser are displayed in the Host DLP Monitor, an interface accessed from the ePolicy Orchestrator Reporting console. All events can be filtered and sorted based on criteria such as protection rules, severity, date, time, user, computer name, or policy version. Events can be labeled by the administrator for tracking purposes. 1.7 TOE Description McAfee Host Data Loss Prevention is a content-based agent solution that inspects enterprise users’ actions concerning sensitive content in their own work environment, their computers. It uses advanced discovery technology as well as predefined dictionaries to identify this content, and incorporates device management and encryption for additional layers of control. 1.7.1 Physical Boundary The TOE is a software TOE and includes: 1. The ePO application executing on a dedicated server Document Version 1.0 McAfee Page 9 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 2. The Host DLP Monitor application on the same system as the ePO application 3. The McAfee Agent application on each managed system to be audited 4. The HDLP Agent software on each managed system to be audited Note specifically that the hardware, operating systems and third party support software (e.g. DBMS) on each of the systems are excluded from the TOE boundary. In order to comply with the evaluated configuration, the following hardware and software components should be used: E COMPONENT VERSION/MODEL TOE Software Host DLP Monitor 9.2 Build 506 HDLP Agent Plug-In 9.2 Build 522 ePolicy Orchestrator 4.6.1 Build 1192 McAfee Agent 4.6? Build 1694 IT Environment Specified in the following: * Table 4- Management System Component Requirements * Table 5 -Supported Agent Platforms + Table 6 - Agent Platform Hardware Requirements Table 3 - Evaluated Configuration for the TOE The evaluated configuration consists of a single instance of the management system (with ePO and Host DLP Monitor) and one or more instances of managed systems (with McAfee Agent and the HDLP Agent Plug-in). ePO supports both ePO authentication and Windows authentication of user account credentials. The evaluated configuration requires the use of Windows authentication only. User accounts (other than the password) are still required to be defined in ePO so that attributes can be associated with the account. The following figure presents an example of an operational configuration. The shaded elements in the boxes at the top of the figure represent the TOE components. ? McAfee Agent 4.6 is shipped/packaged with ePO 4.6. From a clean installation, no additional steps are necessary to install McAfee Agent 4.6. Document Version 1.0 © McAfee Page 10 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Enterprise Network Management System DBMS / SUN JRE / RSA Crypto Lib Microsoft Windows OS General Purpose Computing Platform ® =TOE Component = IT Environment Component Figure 1- TOE Boundary Sys Admin Console Web Browser Host DLP Monitor LP Policy Manager ‚Net Framework 3.5 Microsoft Windows OS General Purpose Computing Platform Managed System(s) RSA Crypto Lib Operating System General Purpose Computing Platform The following specific configuration options apply to the evaluated configuration: 1. The McAfee Agent system tray icon is not displayed on managed systems. 2. McAfee Agent wake-up calls are enabled. 3. Incoming connections to McAfee Agents are only accepted from the configured address of the ePO server 4. The only repository supported is the ePO server. 1.7.2 Hardware and Software Supplied by the IT Environment The TOE consists of a set of software applications. The hardware, operating systems and all third party support software (e.g., DBMS) on the systems on which the TOE executes are excluded from the TOE boundary. The platform on which the ePO and Host DLP Monitor software is installed must be dedicated to functioning as the management system. ePO operates as a distribution system and management system for a client-server architecture offering components for the server part of the architecture (not the clients). The TOE requires the following hardware and software configuration on this platform. COMPONENT MINI M REQUIREMENTS Processor Intel Pentium Ill-class or higher; 1GHz or higher Memory 1GB RAM Document Version 1.0 © McAfee Page 11 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 COMPONENT MINIMUM REQUIREMENTS Processor Intel Pentium 4-class or higher 1.3 GHz or higher Memory 2 GB available RAM minimum 4 GB available RAM recommended minimum Free Disk Space 1.5 GB — First-time installation minimum 2 GB — Upgrade minimum 2.5 GB — Recommended minimum Monitor 1024x768, 256-color, VGA monitor or higher Operating System Windows Server 2003 Enterprise with Service Pack 2 or later Windows Server 2003 Standard with Service Pack 2 or later Windows Server 2003 Datacenter with Service Pack 2 or later Windows Server 2008 Enterprise with Service Pack 2 or later Windows Server 2008 Standard with Service Pack 2 or later Windows Server 2008 Datacenter with Service Pack 2 or later Windows Server 2008 R2 Enterprise Windows Server 2008 R2 Standard Windows Server 2008 R2 Datacenter Windows 2008 Small Business Server Premium Virtual Infrastructure Citrix XenServer 5.5 Update 2 Microsoft Hyper-V Server 2008 R2 VMware ESX 3.5 Update 4 VMware ESX 4.0 Update 1 DBMS Microsoft SQL Server 2005 (with Service Pack 3 or higher) Microsoft SQL Server 2008 SP1/SP2/R2 Network Card Ethernet, 100Mb or higher Disk Partition Formats NTFS Domain Controllers The system must have a trust relationship with the Primary Domain Controller (PDC) on the network Miscellaneous Microsoft .NET Framework 2.0 or later (Required — You must acquire and install this software manually. This software is required if you select an installation option that automatically installs the SQL Server Express 2005 software bundled with this ePolicy Orchestrator software.) Microsoft updates Microsoft Visual C++ Required — Installed automatically. 2005 SP1 Redistributable Microsoft Visual C++ Required — Installed automatically. 2008 Redistributable Package (x86) MSXML 6.0 Table 4 - Management System Component Requirements The McAfee Agent and HDLP Agent Plug-In execute on one or more systems whose policy settings are to be audited. The supported platforms for these components are: SUPPORTED AGENT OS PLATFORM Windows 2000 Server with SP 1, 2, 3, or 4 X86 platforms Windows 2000 Advanced Server with SP 1, 2, 3, or 4 X86 platforms Document Version 1.0 McAfee Page 12 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 SUPPORTED AGENT OS PLATFORM Windows 2000 Professional with SP 1, 2, 3, or 4 X86 platforms Windows XP Professional with SP1 X86 and X64 platforms Windows Server 2003 Standard Edition X86 and X64 platforms Windows Server 2003 Enterprise Edition X86 and X64 platforms Windows Vista, 7 X86 and X64 platforms Windows 2008 Server X86 and X64 platforms Table 5 — Supported Agent Platforms The minimum hardware requirements for the agent platforms are specified in the following table: COMPONENT MINIMUM HARDWARE REQUIREMENTS Memory 20MB RAM Free Disk Space 80MB Network Card Ethernet, 10Mb or higher Table 6 - Agent Platform Hardware Requirements The management system is accessed from remote systems via a browser. The supported browsers are Microsoft Internet Explorer 6.0 with Service Pack 1 or later or Microsoft Internet Explorer 7.0. The TOE relies on Windows to authenticate user credentials during the logon process. User accounts must also be defined within ePO in order to associate permissions with the users. 1.7.3 Logical Boundary This section outlines the boundaries of the security functionality of the TOE; the logical boundary ofthe TOE includes the security functionality described in the following sections. TSF Policy Enforcement DESCRIPTION The TOE enforces policies on managed systems and audits end-user action against those policies. The TOE ensures end users aren’t allowed to copy/modify files as specified by an administrator through a data loss prevention policy. Systems events and alerts are stored in the database (the DBMS is in the IT Environment), and reports based upon completed policy audits may be retrieved via the GUI interface. Identification On the management system, the TOE requires users to identify and authenticate themselves before accessing the TOE software. User accounts must be defined within ePO, but authentication of the user credentials is performed by Windows. No action can be initiated before proper identification and authentication. Each TOE user has security attributes associated with their user account that define the functionality the user is allowed to perform. On the management system and all managed systems, I&A for local login to the operating system (i.e., via a local console) is performed by the local OS (IT Environment). Document Version 1.0 McAfee Page 13 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 TSF DESCRIPTION Management The TOE’s Management Security Function provides support functionality that enables users to configure and manage TOE components. Management of the TOE may be performed via the GUI. Management privileges are defined per-user. Audit The TOE’s Audit Security Function provides auditing of management actions performed by administrators. Authorized users may review the audit records via ePO. System Information The TOE may be configured to import information about systems to be Import managed from Active Directory (LDAP servers) or NT domain controllers. This functionality ensures that all the defined systems in the enterprise network are known to the TOE and may be configured to be managed. Table 7 — Logical Boundary Descriptions 1.7.3.1 TOE Guidance The following guidance documentation is provided as part of the TOE: * Operational User Guidance and Preparative Procedures Supplement: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 + Installation Guide: McAfee® Data Loss Prevention 9.2 Software For Use with ePolicy Orchestrator® 4.6.0 Software * Product Guide: McAfee Data Loss Prevention 9.2 Software For Use with ePolicy Orchestrator® 4.6.0 Software * Installation Guide McAfee ePolicy Orchestrator 4.6.0 Software 1.8 Rationale for Non-bypassability and Separation ofthe TOE The responsibility for non-bypassability and non-interference is split between the TOE and the IT Environment. TOE components are software only products and therefore the non-bypassability and non-interference claims are dependent upon hardware and OS mechanisms. The TOE runs on top ofthe IT Environment supplied operating systems. The TOE ensures that the security policy is applied and succeeds before further processing is permitted whenever a security relevant interface is invoked: the interfaces are well defined and insure that the access restrictions are enforced. Non-security relevant interfaces do not interact with the security functionality of the TOE. The TOE depends upon OS mechanisms to protect TSF data such that it can only be accessed via the TOE. The systems on which the ePO, Host DLP Monitor, and HDLP Policy Manager TOE components execute are dedicated to that purpose. The TOE is implemented with well-defined interfaces that can be categorized as security relevant or non-security relevant. The TOE is implemented such that non-security relevant interfaces have no means of impacting the security functionality of the TOE. Unauthenticated users may not perform any Document Version 1.0 McAfee Page 14 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 actions within the TOE. The TOE tracks multiple users by sessions and ensures the access privileges of each are enforced. The server hardware provides virtual memory and process separation, which the server OS utilizes to ensure that other (non-TOE) processes may not interfere with the TOE; all interactions are limited to the defined TOE interfaces. The OS and DBMS restrict access to TOE data in the database to prevent interference with the TOE via that mechanism. The TOE consists of distributed components. Communication between the components relies upon cryptographic functionality provided by the OS or third party software (operational environment) to protect the information exchanged from disclosure or modification. Document Version 1.0 © McAfee Page 15 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 2 Conformance Claims 2.1 Common Criteria Conformance Claim The TOE is Common Criteria Version 3.1 Revision 3 (July 2009) Part 2 conformant and Part 3 conformant at Evaluation Assurance Level 2 and augmented by ALC_FLR.2 — Flaw Reporting Procedures. 2.2 Protection Profile Conformance Claim The TOE does not claim conformance to a Protection Profile. Document Version 1.0 © McAfee Page 16 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 3 Security Problem Definition In order to clarify the nature of the security problem that the TOE is intended to solve, this section describes the following: + Any known or assumed threats to the assets against which specific protection within the TOE or its environment is required. * — Any organizational security policy statements or rules with which the TOE must comply. * Any assumptions about the security aspects of the environment and/or of the manner in which the TOE is intended to be used. This chapter identifies assumptions as A.assumption, threats as T.threat and policies as P.policy. 3.1 Threats The following are threats identified for the TOE and the IT System the TOE monitors. The TOE itself has threats and the TOE is also responsible for addressing threats to the environment in which it resides. The assumed level of expertise of the attacker for all the threats is unsophisticated. The TOE addresses the following threats: THREAT DESCRIPTION T.COMDIS An unauthorized user may attempt to disclose the data collected and produced by the TOE by bypassing a security mechanism. T.COMINT An unauthorized user may attempt to compromise the integrity of the data collected and produced by the TOE by bypassing a security mechanism. T.IMPCON An unauthorized user may inappropriately change the configuration of the TOE causing potential intrusions to go undetected. T.LOSSOF An unauthorized user may attempt to remove or destroy data collected and produced by the TOE. T.NOHALT An unauthorized user may attempt to compromise the continuity of the System’s collection and analysis functions by halting execution of the TOE. T.PRIVIL An unauthorized user may gain access to the TOE and exploit system privileges to gain access to TOE security functions and data T.SENSITIVE_DATA An unauthorized user may transmit or transfer sensitive data from managed systems. Table 8- Threats Addressed by the TOE 3.2 Organizational Security Policies An organizational security policy is a set of rules, practices, and procedures imposed by an organization to address its security needs. The following Organizational Security Policies apply to the TOE: | POLI DESCRIPTION Document Version 1.0 McAfee Page 17 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 POLI DESCRIPTION P.ACCACT Users of the TOE shall be accountable for their actions within the TOE. P.ACCESS All data collected and produced by the TOE shall only be used for authorized purposes. P.DETECT Static configuration information that might be indicative of the potential for a future intrusion or the occurrence of a past intrusion of an IT System or events that are indicative of inappropriate activity that may have resulted from misuse, access, or malicious activity of IT System assets must be collected. P.IMPORT The TOE shall be able to import data about managed systems from LDAP servers and NT Domains. P.INTEGRITY Data collected and produced by the TOE shall be protected from modification. P.MANAGE The TOE shall only be managed by authorized users. P.PROTCT The TOE shall be protected from unauthorized accesses and disruptions of TOE data and functions. Table 9 - Organizational Security Policies 3.3 Assumptions This section describes the security aspects of the environment in which the TOE is intended to be used. The TOE is assured to provide effective security measures in a co-operative non-hostile environment only if it is installed, managed, and used correctly. The following specific conditions are assumed to exist in an environment where the TOE is employed. ASSUMPTION DESCRIPTION A.ACCESS The TOE has access to all the IT System data it needs to perform its functions. A.ASCOPE The TOE is appropriately scalable to the IT Systems the TOE monitors. A.DATABASE Access to the database used by the TOE via mechanisms outside the TOE boundary is restricted to use by authorized users. A.DYNMIC The TOE will be managed in a manner that allows it to appropriately address changes in the IT System the TOE monitors. A.LOCATE The processing resources of the TOE will be located within controlled access facilities, which will prevent unauthorized physical access. A.MANAGE There will be one or more competent individuals assigned to manage the TOE and the security of the information it contains. A.NOEVIL The authorized administrators are not careless, willfully negligent, or hostile, and will follow and abide by the instructions provided by the TOE documentation. A.PROTCT The TOE hardware and software critical to security policy enforcement will be protected from unauthorized physical modification. Table 10 — Assumptions Document Version 1.0 McAfee Page 18 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 4 Security Objectives 4.1 Security Objectives for the TOE The IT security objectives for the TOE are addressed below: OBJECTIVE DESCRIPTION O.ACCESS The TOE must allow authorized users to access only authorized TOE functions and data. O.AUDITS The TOE must record audit records for data accesses and use of the TOE functions on the management system. O.AUDIT_PROTECT The TOE will provide the capability to protect audit information generated by the TOE. O.EADMIN The TOE must include a set of functions that allow effective management of its functions and data. O.IDENTIFY The TOE must be able to identify users prior to allowing access to TOE functions and data on the management system. O.IMPORT The TOE shall provide mechanisms to import system data from Active Directory (LDAP servers) and NT Domain Controllers. O.INTEGRITY The TOE must ensure the integrity of all System data. O.SENSITIVE_DATA The TOE shall take specified actions upon the access, transmission, printing, or copying of sensitive files or data. Table 11 — TOE Security Objectives 4.2 Security Objectives for the Operational Environment The security objectives for the operational environment are addressed below: OBJECTIVE DESCRIPTION OE.PHYCAL Those responsible for the TOE must ensure that those parts of the TOE critical to security policy are protected from any physical attack. OE.CREDEN Those responsible for the TOE must ensure that all access credentials are protected by the users in a manner which is consistent with IT security. OE.INSTALL Those responsible for the TOE must ensure that the TOE is delivered, installed, managed, and operated in a manner which is consistent with IT security. OE.INTEROP The TOE is interoperable with the managed systems it monitors OE.PERSON Personnel working as authorized administrators shall be carefully selected and trained for proper operation of the System. OE.AUDIT_PROTECT The IT Environment will provide the capability to protect audit information generated by the TOE via mechanisms outside the TSC. OE.AUDIT_REVIEW The IT Environment will provide the capability for authorized administrators to review audit information generated by the TOE. Document Version 1.0 © McAfee Page 19 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 OBJECTIVE DESCRIPTION OE.CRYPTO The IT Environment will provide the cryptographic functionality and protocols required for the TOE to securely transfer information between distributed portions of the TOE. OE.DATABASE Those responsible for the TOE must ensure that access to the database via mechanisms outside the TOE boundary (e.g., DBMS) is restricted to authorized users only. OE.IDAUTH The IT Environment must be able to identify and authenticate users prior to them gaining access to TOE functionality on the managed system. It must also be able to authenticate user credentials on the management system when requested by the TOE. OE.PROTECT The IT environment will protect itself and the TOE from external interference or tampering. OE.SD_PROTECTION The IT Environment will provide the capability to protect system data via mechanisms outside the TSC. OE.STORAGE The IT Environment will store TOE data in the database and retrieve it when directed by the TOE. OE.TIME The IT Environment will provide reliable timestamps to the TOE Table 12 — Operational Environment Security Objectives 4.3 Security Objectives Rationale This section provides the summary that all security objectives are traced back to aspects of the addressed assumptions, threats, and Organizational Security Policies (if applicable). The following table provides a high level mapping of coverage for each threat, assumption, and policy: OBJECTIVE OE.AUDIT_REVIEW THREAT / ASSUMPTION A.ACCESS A.ASCOPE A.DATABASE v A.DYNMIC v A.LOCATE v A.MANAGE v A.NOEVIL ‚vv A.PROTCT v P.ACCACT v v 4 v P.ACCESS vv vv P.DETECT v v P.IMPORT v P.INTEGRITY v v v YLY PMANAG vi | y 7 O.AUDIT_PROTECT O.SENSITIVE_DATA OE.SD_PROTECTION OE.AUDIT_PROTECT O.IDENTIFY NEN OE.INTEROP x Document Version 1.0 © McAfee Page 20 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 OBJECTIVE THREAT / ASSUMPTION P.PROTCT O.IDENTIFY |O.AUDIT_PROTECT |0.SENSITIVE_DATA IOE.SD_PROTECTION |OE.AUDIT_PROTECT BNOE.PHYCAL BNOE.CRYPTO BNOE.STORAGE T.COMDIS «| «| CET T.COMINT T.IMPCON v T.LOSSOF T.NOHALT Isla Mrz SES! SISISISI T.PRIVIL ddd <) GSD T.SENSITIVE_ DATA v Table 13 — Mapping of Assumptions, Threats, and OSPs to Security Objectives The following table provides detailed evidence of coverage for each threat, policy, and assumption: THREATS, POLICIE: AND ASSUMPTIONS A.ACCESS RATIONALE The TOE has access to all the IT System data it needs to perform its functions. The OE.INTEROP objective ensures the TOE has the needed access. A.ASCOPE The TOE is appropriately scalable to the IT System the TOE monitors. The OE.INTEROP objective ensures the TOE has the necessary interactions with the IT System it monitors. A.DATABASE Access to the database used by the TOE via mechanisms outside the TOE boundary is restricted to use by authorized users. The OE.DATABASE objective ensures that access to any mechanisms outside the TOE boundary that may be used to access the database is configured by the administrators such that only authorized users may utilize the mechanisms. A.DYNMIC The TOE will be managed in a manner that allows it to appropriately address changes in the IT System the TOE monitors. The OE.INTEROP objective ensures the TOE has the proper access to the IT System. The OE.PERSON objective ensures that the TOE will managed appropriately. A.LOCATE The processing resources of the TOE will be located within controlled access facilities, which will prevent unauthorized physical access. The OE.PHYCAL provides for the physical protection of the TOE. A.MANAGE There will be one or more competent individuals assigned to manage the TOE and the security of the information it contains. The OE.PERSON objective ensures all authorized administrators are qualified and trained to manage the TOE. Document Version 1.0 © McAfee Page 21 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 THREATS, POLICIES, AND ASSUMPTIONS A.NOEVIL RATIONALE The authorized administrators are not careless, willfully negligent, or hostile, and will follow and abide by the instructions provided by the TOE documentation. The OE.INSTALL objective ensures that the TOE is properly installed and operated and the OE.PHYCAL objective provides for physical protection ofthe TOE by authorized administrators. The OE.CREDEN objective supports this assumption by requiring protection of all authentication data. A.PROTCT The TOE hardware and software critical to security policy enforcement will be protected from unauthorized physical modification. The OE.PHYCAL provides for the physical protection ofthe TOE hardware and software. P.ACCACT Users of the TOE shall be accountable for their actions within the TOE. The O.AUDITS objective implements this policy by requiring auditing of all data accesses and use of TOE functions. The O.IDENTIFY objective supports this objective by ensuring each user is uniquely identified. The OE.IDAUTH objective supports this objective by ensuring each user is uniquely identified and authenticated. The OE.AUDIT_REVIEW objective provides the ability for administrators to review the audit records generated by the TOE so that accountability for administrator actions can be determined. P.ACCESS All data collected and produced by the TOE shall only be used for authorized purposes. The O.IDENTIFY objective provides for identification of users prior to any TOE function accesses via the ePO web interface. The OE.IDAUTH objective provides for authentication of users prior to any TOE function accesses. The O.ACCESS objective builds upon the O.IDENTIFY and OE.IDAUTH objectives by only permitting authorized users to access TOE functions. The OE.SD_PROTECTION and OE.DATABASE objectives counter this threat for mechanisms outside the TSC via IT Environment protections of the system data trail and the database used to hold TOE data. The OE.SD_PROTECTION and O.ACCESS objectives counter this threat for mechanisms inside the TSC via TOE protections of the system data trail and the database used to hold TOE data. P.DETECT Static configuration information that might be indicative of the potential for a future intrusion or the occurrence of a past intrusion of an IT System or events that are indicative of inappropriate activity that may have resulted from misuse, access, or malicious activity of IT System assets must be collected. The O.AUDITS objectives address this policy by requiring collection of audit and policy audit data. The OE.TIME objective supports this policy by providing atime stamp for insertion into the system data records. P.IMPORT The TOE shall be able to import data about managed systems from LDAP servers and NT Domains. The O.IMPORT objective addresses this policy by requiring the TOE to provide functionality to import data about managed systems from LDAP servers and NT Domains. Document Version 1.0 McAfee Page 22 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 THREATS, POLICIES, AND ASSUMPTIONS P.INTEGRITY RATIONALE Data collected and produced by the TOE shall be protected from modification. The O.INTEGRITY objective ensures the protection of System data from modification. The O.AUDIT_PROTECT and OE.AUDIT_PROTECT objectives ensure the integrity of audit records in the database generated by the TOE using access mechanisms inside and outside the TSC respectively. The OE.CRYPTO objective requires the IT Environment to provide cryptographic functionality and protocols that can be used by the TOE to protect the data during transit. The OE.STORAGE objective requires the IT Environment to provide storage and retrieval mechanisms for System data for use by the TOE. P.MANAGE The TOE shall only be managed by authorized users. The OE.PERSON objective ensures competent administrators will manage the TOE and the O.EADMIN objective ensures there is a set of functions for administrators to use. The OE.INSTALL objective supports the OE.PERSON objective by ensuring administrator follow all provided documentation and maintain the security policy. The O.IDENTIFY objective provides for identification of users prior to any TOE function accesses. The OE.IDAUTH objective provides for authentication of users prior to any TOE function accesses. The O.ACCESS objective builds upon the O.IDENTIFY objective by only permitting authorized users to access TOE functions. The OE.CREDEN objective requires administrators to protect all authentication data. P.PROTCT The TOE shall be protected from unauthorized accesses and disruptions of TOE data and functions. The OE.PHYCAL objective protects the TOE from unauthorized physical modifications. The OE.PROTECT objective supports the TOE protection from the IT Environment. The OE.CRYPTO objective requires the IT Environment to provide cryptographic functionality and protocols that can be used by the TOE to protect the data during transit. The OE.STORAGE objective requires the IT Environment to provide storage and retrieval mechanisms for System data for use by the TOE. T.COMDIS An unauthorized user may attempt to disclose the data collected and produced by the TOE by bypassing a security mechanism. The O.IDENTIFY objective provides for identification of users prior to any TOE data access. The OE.IDAUTH objective provides for authentication of users prior to any TOE data access. The O.ACCESS objective builds upon the O.IDENTIFY objective by only permitting authorized users to access TOE data. The OE.PROTECT objective supports the TOE protection from the IT Environment. T.COMINT An unauthorized user may attempt to compromise the integrity of the data collected and produced by the TOE by bypassing a security mechanism. The O.IDENTIFY objective provides for identification of users prior to any TOE data access. The OE.IDAUTH objective provides for authentication of users prior to any TOE data access. The O.ACCESS objective builds upon the O.IDENTIFY objective by only permitting authorized users to access TOE data. The O.INTEGRITY objective ensures no System data will be modified. The OE.PROTECT objective supports the TOE protection from the IT Environment. Document Version 1.0 McAfee Page 23 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 THREATS, POLICIES, AND ASSUMPTIONS T.IMPCON RATIONALE An unauthorized user may inappropriately change the configuration of the TOE causing potential intrusions to go undetected. The OE.INSTALL objective states the authorized administrators will configure the TOE properly. The O.EADMIN objective ensures the TOE has all the necessary administrator functions to manage the product. The O.IDENTIFY objective provides for identification of users prior to any TOE data access. The OE.IDAUTH objective provides for authentication of users prior to any TOE data access. The O.ACCESS objective builds upon the O.IDENTIFY objective by only permitting authorized users to access TOE functions. T.LOSSOF An unauthorized user may attempt to remove or destroy data collected and produced by the TOE. The O.IDENTIFY objective provides for identification of users prior to any TOE data access. The OE.IDAUTH objective provides for authentication of users prior to any TOE data access. The O.ACCESS objective builds upon the O.IDENTIFY objective by only permitting authorized users to access TOE data. The O.INTEGRITY objective ensures no System data will be deleted. T.NOHALT An unauthorized user may attempt to compromise the continuity ofthe System’s collection and analysis functions by halting execution of the TOE. The O.IDENTIFY objective provides for identification of users prior to any TOE data access. The OE.IDAUTH objective provides for authentication of users prior to any TOE data access. The O.ACCESS objective builds upon the O.IDENTIFY objective by only permitting authorized users to access TOE functions. T.PRIVIL An unauthorized user may gain access to the TOE and exploit system privileges to gain access to TOE security functions and data. The O.IDENTIFY objective provides for identification of users prior to any TOE data access. The OE.IDAUTH objective provides for authentication of users prior to any TOE data access. The O.ACCESS objective builds upon the O.IDENTIFY objective by only permitting authorized users to access TOE functions. T.SENSITVE_DATA An unauthorized user may transmit or transfer sensitive data from managed systems. The O.SENSITIVE_DATA objective requires the TOE to take specified actions upon the access, transmission, printing, or copying of sensitive files or data. Table 14 — Rationale for Mapping of Threats, Policies, and Assumptions to Objectives Document Version 1.0 © McAfee Page 24 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 5 Extended Components Definition This Security Target does not include any extended components. Document Version 1.0 McAfee Page 25 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 6 Security Requirements The security requirements that are levied on the TOE and the IT environment are specified in this section of the ST. 6.1 Security Functional Requirements The functional security requirements for this Security Target consist of the following components from Part 2 of the CC, and those that were explicitly stated, all of which are summarized in the following table: SS HEADING CLASS_FAMILY DESCRIPTION Security Audit FAU_GEN.1 Audit Data Generation FAU_GEN.2 User Identity Association FAU_SAR.1 Audit Review FAU_SAR.2 Restricted Audit Review FAU_STG.1 Protected Audit Trail Storage Information Flow FDP_IFC.1 Subset Information Flow Control Control FDP_IFF.1 Simple Security Attributes Identification and FIA_ATD.1 User Attribute Definition Authentication FIA_UID.1 Timing of Identification FIA_USB.1 User-Subject Binding Security Management | FMT_MTD.1 Management of TSF Data FMT_SMF.1 Specification of Management Functions FMT_SMR.1 Security Roles Protection ofthe TSF FPT_TDC.1 Inter-TSF Basic TSF Data Consistency Table 15- TOE Functional Components 6.1.1 Security Audit (FAU) 6.1.1.1 FAU_GEN.1 Audit Data Generation FAU_GEN.1.1 The TSF shall be able to generate an audit record of the following auditable events: a) Start-up and shutdown of the audit functions; b) All auditable events for the not specified level of audit; and c) The events identified in Table 16 — Audit Events and Details FAU_GEN.1.2 The TSF shall record within each audit record at last the following information: a) Date and time of the event, type of event, subject identity (if applicable), and the outcome (success or failure) of the event; and b) For each audit event type, based on the auditable event definitions of the functional components included in the PP/ST, the information detailed in Document Version 1.0 McAfee Page 26 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Table 16 — Audit Events and Details. Application Note: The auditable events for the (not specified) level of auditing are included in the following table: COMPONENT EVENT DETAILS FAU_GEN.1 Start-up and shutdown of audit functions FAU_GEN.1 Access to the TOE and System data Object IDs, Requested access FAU_SAR.1 Reading of information from the audit records. FDP_IFF.1 All decisions on requests for information | The presumed flow. addresses of the source and destination subject. FAU_SAR.2 Note: Unsuccessful attempts to read information from the audit records do not occur because the TOE does not present that capability to users that are not authorized to read the audit records. FIA_ATD.1 All changes to TSF data (including passwords) result in an audit record being generated. Note that passwords are not configured, so no audit records for rejection of a tested secret will be generated. FIA_UID.1 All use of the user identification User identity, mechanism location FIA_USB.1 Successful binding of attributes to subjects is reflected in the audit record for successful authentication. Unsuccessful binding does not occur in the TOE design. FMT_MTD.1 All modifications to the values of TSF data FMT_SMF.1 Use of the management functions. User identity, function used FMT_SMR.1 Modifications to the group of users that User identity are part of a role FPT_TDC.1 Use of the asset import function Data Source, result, identification of which TSF data have been imported Detection of modified TSF data Data Source, Identification of which TSF data have been modified Document Version 1.0 Table 16 - Audit Events and Details © McAfee Page 27 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 6.1.1.2 FAU_GEN.2 User Identity Association FAU_GEN.2.1 For audit events resulting from actions of identified users, the TSF shall be able to associate each auditable event with the identity of the user that caused the event. 6.1.1.3 FAU SAR.1 Audit Review FAU_SAR.1.1 The TSF shall provide authorized users with Global Administrator status or the View Audit Log permission with the capability to read all information from the audit records. FAU_SAR.1.2 The TSF shall provide the audit records in a manner suitable for the user to interpret the information. 6.1.1.4 FAU_SAR.2 Restricted Audit Review FAU_SAR.2.1 The TSF shall prohibit all users read access to the audit records, except those users that have been granted explicit read-access. 6.1.1.5 FAU_STG.1 Protected Audit Trail Storage FAU_STG.1.1 The TSF shall protect the stored audit records in the audit trail from unauthorized deletion. FAU_STG.1.2 The TSF shall be able to prevent unauthorized modifications to the audit records in the audit trail. 6.1.2 Information Flow Control (FDP) 6.1.2.1 FDP_IFC.1 - Subset Information Flow Control FDP_IFC.1.1 The TSF shall enforce the DLP Information Flow Control SFP on Subjects: External IT entities attempting to transfer or transmit sensitive data Information: Files and content stored on the managed system or transferred from the managed system Operations: Apply RM policy, Block, Encrypt, Delete, Monitor, Notify User, Quarantine, Read Only, Request Justification, Store Evidence. 6.1.2.2 FDP_IFF.1 - Simple Security Attributes FDP_IFF.1.1 The TSF shall enforce the DLP Information Flow Control SFP based on the following types of subject and information security attributes: Subject Security Attributes: * IP Address Document Version 1.0 McAfee Page 28 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 FDP_IFF.1.2 Document Version 1.0 * MAC Address * Agent ID ® User Assignment Group * Computer Assignment Group Information Security Attributes + Application + Dictionary * Email Destination + File Extension + File Server * Network * Printer + Registered document repository * Tag/Content Category * Text Pattern * Web Destination * Whitelist * Associated Protection Rules. The TSF shall permit an information flow between a controlled subject and controlled information via a controlled operation if the following rules hold: A. Monitoring option is enabled for the service and information structure type AND: 1. The attribute is not covered by protection rule OR 2. The attribute is whitelisted. OR B. DLP monitoring is disabled for the subject and information structure type. © McAfee Page 29 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 FDP_IFF.1.3 The TSF shall enforce the no other additional rules. FDP_IFF.1.4 The TSF shall explicitly authorize an information flow based on the following rules: No explicit authorization rules. FDP_IFF.1.5 The TSF shall explicitly deny an information flow based on the following rules: No explicit denial rules. 6.1.3. Identification and Authentication (FIA) 6.1.3.1 FIA_ATD.1 User Attribute Definition FIA_ATD.1.1 The TSF shall maintain the following list of security attributes belonging to individual users: a) ePO User name; b) Enabled or disabled; c) Authentication configuration (must be configured for Windows); d) Global Administrator status; and e) Permission Sets. 6.1.3.2 FIA_UID.1 Timing of Identification FIA_UID.1.1 The TSF shall allow no actions on behalf of the user to be performed on the management system before the user is identified. FIA_UID.1.2 The TSF shall require each user to be successfully identified before allowing any other TSF-mediated actions on behalf of that user on the management system. Application Note and Refinement Rationale: The TOE performs identification on the management system then relies upon Windows for authentication. Application Note: Authentication on the managed systems is the responsibility of the operating environment. 6.1.3.3 FIA_USB.1 User-Subject Binding FIA_USB.1.1 The TSF shall associate the following user security attributes with subjects acting on behalf of that user: a) Global Administrator status; and b) Permissions. Document Version 1.0 © McAfee Page 30 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 FIA_USB.1.2 The TSF shall enforce the following rules on the initial association of user security attributes with subjects acting on the behalf of users: user security attributes are bound upon successful login with a valid ePO User Name. FIA_USB.1.3 The TSF shall enforce the following rules governing changes to the user security attributes associated with subjects acting on the behalf of users: user security attributes do not change until the user refreshes the menu of the GUI management session. Application Note: Permissions are determined by the union of all permissions in any permission set associated with a user. Application Note: If the security attributes for a user are changed while that user has an active session, the new security attributes are not bound to a session until the next page refresh. 6.1.4 Security Management (FMT) 6.1.4.1 FMT_MTD.1 Management of TSF Data FMT_MTD.1.1 The TSF shall restrict the ability to query, modify, delete, clear, create, export and use the TSF data identified in Table 17 — TSF Data Access Permissions to a Global Administrator or a user with appropriate permissions. FDATA ASSOCIATED PERMISSION OPERATIONS PERMITTED Contacts Create and edit contacts Query, create, delete and modify Use contacts Use Dashboards Use public dashboards Query and use public dashboards Use public dashboards; Query and use public create and edit personal dashboards; create and dashboards modify personal dashboards Use public dashboards; Query and use public create and edit personal dashboards; create, delete dashboards; make personal and modify personal dashboards public dashboards; make personal dashboards public Data n/a (only allowed by a Global | Query and modify Retention Administrator) Settings Email Servers | n/a (only allowed by a Global | Query, create, delete and Administrator) modify Event Add, remove and change Query DLP policy audit event Records (DLP | Audits and Assignments records Policies) View Audits and Assignments | Query DLP policy audit event records Document Version 1.0 McAfee Page 31 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 FDATA ePO User Accounts ASSOCIATED PERMISSION n/a (only allowed by a Global Administrator) OPERATIONS PERMITTED Query, create, delete and modify Event Filtering n/a (only allowed by a Global Administrator) Query and modify Global Administrator Status n/a (only allowed by a Global Administrator) Query and modify Groups View "System Tree" tab Query View "System Tree" tab along with Edit System Tree groups and systems Query, create, delete and modify Notification Rules View notification rules and Notification Log Query Create and edit notification rules; view Notification Log Query, create, delete and modify Create and edit notification rules; view and purge Notification Log; create and edit SNMP servers and external commands Query, create, delete and modify Permission Set n/a (only allowed by a Global Administrator) Query, create, delete, modify, and assign (to a user) permissions Protection Rules View settings Query View and change settings Query, create, delete, and modify (including enable) Queries Use public queries Query and use public queries Use public queries; create and edit personal queries Query and use public queries; create and modify personal queries Edit public queries; create and edit personal queries; make personal queries public Query, delete, modify and use public queries; create, delete and modify (including make public) personal queries Server Settings n/a (only allowed by a Global Administrator) Query and modify System Information Create and edit systems Query, create, delete and modify System Tree View System Tree Query Table 17 - TSF Data Access Permissions Document Version 1.0 © McAfee Page 32 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 6.1.4.2 FMT_SMF.1 Specification of Management Functions FMT_SMF.1.1 The TSF shall be capable of performing the following security management functions: a) b) c) d) e) 2 9) h) i) j) ePO User Account management, Permission Set management, Audit Log management, Event Log management, Notification management, Event Filtering management, System Tree management, DLP Policy and Rule management, Query management, Dashboard management. 6.1.4.3 FMT_SMR.1 Security Roles FMT_SMR.1.1 The TSF shall maintain the roles: Global Administrator and User. FMT_SMR.1.2 The TSF shall be able to associate users with roles. Application Note: A Global Administrator is a defined user account with Global Administrator status. Users are defined user accounts without Global Administrator status but with specific permissions. 6.1.5 Protection of the TSF (FPT) 6.1.5.1 FPT_TDC.1 Inter-TSF Basic TSF Data Consistency FPT_TDC.1.1 The TSF shall provide the capability to consistently interpret system information when shared between the TSF and another trusted IT product. FPT_TDC.1.2 The TSF shall use the following rules when interpreting the TSF data from another trusted IT product. a) b) c) Document Version 1.0 For Active Directory (LDAP servers), the data is interpreted according to the LDAP version 3 protocol. For NT Domains, the data is interpreted according to the NetBIOS protocol. When conflicting information is received from different sources, highest priority is given to information learned from the McAfee Agent, then to Active Directory, and finally to NT Domains. © McAfee Page 33 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 6.2 Security Assurance Requirements The assurance security requirements for this Security Target are taken from Part 3 of the CC. These assurance requirements compose an Evaluation Assurance Level 2 (EAL2) augmented by ALC_FLR.2. The assurance components are summarized in the following table: CLASS HEADING CLASS_FAMILY DESCRIPTION ADV: Development ADV_ARC.1 Security Architecture Description ADV_FSP.2 Security-enforcing Functional Specification ADV_TDS.1 Basic Design AGD: Guidance Documents AGD_OPE.1 Operational User Guidance AGD_PRE.1 Preparative Procedures ALC: Lifecycle Support ALC_CMC.2 Use of aCM System ALC_CMS.2 Parts ofthe TOE CM coverage ALC_DEL.1 Delivery Procedures ALC_FLR.2 Flaw Reporting Procedures ATE: Tests ATE_COV.1 Evidence of Coverage ATE_FUN.1 Functional Testing ATE_IND.2 Independent Testing - Sample AVA: Vulnerability Assessment | AVA_VAN.2 Vulnerability Analysis Table 18 — Security Assurance Requirements at EAL2 6.3 CC Component Hierarchies and Dependencies This section of the ST demonstrates that the identified SFRs include the appropriate hierarchy and dependencies. The following table lists the TOE SFRs and the SFRs each are hierarchical to, dependent upon and any necessary rationale. SFR HIERARCHICAL TO DEPENDEN! RATIONALE FAU_GEN.1 No other FPT_STM.1 Satisfied by OE.TIME in the environment components FAU_GEN.2 No other FAU_GEN.1, Satisfied components FIA_UID.1 Satisfied FAU_SAR.1 No other FAU_GEN.1 Satisfied components FAU_SAR.2 No other FAU_SAR.1 Satisfied components FAU_STG.1 No other FAU_GEN.1 Satisfied components FDP_IFC.1 No other FDP_IFF.1 Satisfied components FDP_IFF.1 No other FDP_IFC.1 Satisfied” components FMT_MSA.3 3 FMT_MSA.3 does not impact the security required by FDP_IFF.1 for this particular TOE because there are no configurable security attributes Document Version 1.0 McAfee Page 34 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 SFR HIERARCHICAL TO DEPENDEN RATIONALE FIA_ATD.1 No other None n/a components FIA_UID.1 No other None n/a components FIA_USB.1 No other FIA_ATD.1 Satisfied components FMT_MTD.1 No other FMT_SMF.1 Satisfied components FMT_SMR.1 Satisfied FMT_SMF.1 No other None n/a components FMT_SMR.1 No other FIA_UID.1 Satisfied components FPT_TDC.1 No other None n/a components Table 19 — TOE SFR Dependency Rationale 6.4 Security Requirements Rationale This section provides rationale for the Security Functional Requirements demonstrating that the SFRs are suitable to address the security objectives 6.4.1 Security Functional Requirements for the TOE The following table provides a high level mapping of coverage for each security objective: FAU_GEN.1 OBJECTIVE O.AUDIT_PROTECT O.SENSITIVE_DATA FAU_GEN.2 S| Seas FAU_SAR.1 FAU_SAR.2 FAU_STG.1 FDP_IFC.1 FDP_IFF.1 FIA_ATD.1 FIA_UID.1 FIA_USB.1 FMT_MTD.1 FMT_SMF.1 FMT_SMR.1 NENENENEN xx Document Version 1.0 © McAfee Page 35 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 OBJECTIVE O.AUDIT_PROTECT 0.SENSITIVE_DATA BNO.IMPORT FPT_TDC.1 Table 20 - Mapping of TOE SFRs to Security Objectives The following table provides detailed evidence of coverage for each security objective: OBJECTIVE RATIONALE O.ACCESS The TOE must allow authorized users to access only appropriate TOE functions and data. Users authorized to access the TOE are determined using an identification process [FIA_UID.1]. Upon successful I&A, the security attributes for the user are bound to the subject so that proper access controls can be enforced [FIA_USB.1]. The permitted access to TOE data by the roles and permissions is defined [FMT_MTD.1, FMT_SMF.1, FMT_SMR.1]. The audit log records may only be viewed by authorized users (FAU_SAR.1, FAU_SAR.2]. O.AUDITS The TOE must record audit records for data accesses and use of the TOE functions on the management system. Security-relevant events must be defined and auditable for the TOE [FAU_GEN.1]. The user associated with the events must be recorded [FAU_GEN.2]. The TOE does not provide any mechanism for users to modify or delete audit records other than via configuration of the data retention timeframe, and that functionality is limited to administrators [FAU_STG.1]. O.AUDIT_PROTECT The TOE will provide the capability to protect audit information generated by the TOE. The TOE is required to protect the stored audit records from unauthorized deletion or modification [FAU_STG.1]. O.EADMIN The TOE must include a set of functions that allow effective management of its functions and data. The functions and roles required for effective management are defined [FMT_SMF.1, FMT_SMR.1], and the specific access privileges for the roles and permissions is enforced [FMT_MTD.1]. O.IDENTIFY The TOE must be able to identify users prior to allowing access to TOE functions and data on the management system. Security attributes of subjects used to enforce the security policy of the TOE must be defined [FIA_ATD.1]. Users authorized to access the TOE are determined using an identification process [FIA_UID.1] and the TOE relies upon authentication services provided by the operational environment. Document Version 1.0 © McAfee Page 36 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 OBJECTIVE RATIONALE O.IMPORT The TOE shall provide mechanisms to import system information from Active Directory (LDAP servers) and NT Domains. The TOE defines management functionality to import system tree information [FMT_MTD.1] and the rules for interpreting data from those sources [FPT_TDC.1]. O.INTEGRITY The TOE must ensure the integrity of all System data. Only authorized administrators of the System may query or add System data [FMT_MTD.1]. O.SENSITIVE_DATA The TOE shall take specified actions upon the access, transmission, printing, or copying of sensitive files or data. The TOE implements data classification to identify/track sensitive data and Protection Rules to act when sensitive data is handled inappropriately [FDP_IFC.1 and FDP_IFF.1]. Table 21 - Rationale for Mapping of TOE SFRs to Objectives 6.4.2 Security Assurance Requirements This section identifies the Lifecycle , Development, Test, and Guidance measures applied to satisfy CC assurance requirements. SECURITY ASSURANCE REQUIREMENT ASSURANCE MEASURES / EVIDENCE TITLE ADV_ARC.1: Security Architecture Description | Architecture Description: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 ADV_FSP.2: Security-Enforcing Functional Functional Specification: McAfee Host Data Loss Specification Prevention 9.2 and ePolicy Orchestrator 4.6 ADV_TDS.1: Basic Design Basic Design: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 AGD_OPE.1: Operational User Guidance Operational User Guidance and Preparative Procedures Supplement: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 AGD_PRE.1: Preparative Procedures Operational User Guidance and Preparative Procedures Supplement: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 ALC_CMC.2: Use of a CM System Configuration Management Processes and Procedures: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 ALC_CMS.2: Parts of the TOE CM Coverage Configuration Management Processes and Procedures: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 ALC_DEL.1: Delivery Procedures Delivery Procedures: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 ALC_FLR.2: Flaw Reporting Flaw Reporting: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 ATE_COV.1: Evidence of Coverage Security Testing: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Document Version 1.0 McAfee Page 37 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 ATE_FUN.1: Functional Testing Security Testing: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 ATE_IND.2: Independent Testing - Sample Security Testing: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 AVA_VAN.2: Vulnerability Analysis Performed and provided by CCTL Table 22 - Security Assurance Measures 6.4.2.1 Rationale for TOE Assurance Requirements Selection The TOE stresses assurance through vendor actions that are within the bounds of current best commercial practice. The TOE provides, via review of vendor-supplied evidence, independent confirmation that these actions have been competently performed. The general level of assurance for the TOE is: 1. Consistent with current best commercial practice for IT development and provides a product that is competitive against non-evaluated products with respect to functionality, performance, cost, and time-to-market. 2. The TOE assurance also meets current constraints on widespread acceptance, by expressing its claims against EAL2 from part 3 of the Common Criteria. 3. Consistent with current best practice for tracking and fixing flaws as well as providing fixes to customers. 6.5 TOE Summary Specification Rationale This section demonstrates that the TOE’s Security Functions completely and accurately meet the TOE SFRs. The following tables provide a mapping between the TOE’s Security Functions and the SFRs and the rationale. Policy Enforcement System Information Identification FAU_GEN.1 FAU_GEN.2 FAU_SAR.1 FAU_SAR.2 FAU_STG.1 SNS) SN) SGT Document Version 1.0 © McAfee Page 38 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 R E = 1 2 2 = £ i Fa FDP_IFC.1 v FDP_IFF.1 v FIA_ATD.1 v FIA_UID.1 v FIA_USB.1 v FMT_MTD.1 7 FMT_SMF.1 7 FMT_SMR.1 7 FPT_TDC.1 v Table 23 — SFR to TOE Security Functions Mapping Si SF AND RATIONALE FAU_GEN.1 Audit - ePO user actions area audited according to the events specified in the table with the SFR. FAU_GEN.2 Audit - The audit log records include the associated user name when applicable. FAU_SAR.1 Audit - Audit log records are displayed in a human readable table form from queries generated by authorized users. FAU_SAR.2 Audit - Only authorized users have permission to query audit log records. FAU_STG.1 ‚Audit - The only mechanism provided by the TOE to cause audit records to be deleted is configuration of the data retention timeframe, which is restricted to administrators. The TOE does not provide any mechanism for users to modify audit records. FDP_IFC.1 Policy Enforcement — The TOE implements data classification to identify/track sensitive data and Protection Rules to act when sensitive data is handled inappropriately. FDP_IFF.1 Policy Enforcement - The TOE implements data classification to identify/track sensitive data and Protection Rules to act when sensitive data is handled inappropriately. FIA_ATD.1 Management - User security attributes are associated with the user user account via ePO User Account management. FIA_UID.1 Identification - The TSF requires users to identify and authenticate themselves before invoking any other TSF function or before viewing any TSF data via an interface within the TSC. No action can be initiated before proper identification and authentication. Document Version 1.0 © McAfee Page 39 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Da SF AND RATIONALE FIA_USB.1 Identification - Upon successful login, the TOE binds the Global Administrator status and the union of all the permissions from the permission sets from the user account configuration to the session. FMT_MTD.1 Management - The Global Administrator status and user permissions determine the access privileges of the user to TOE data. FMT_SMF.1 Management - The management functions that must be provided for effective management of the TOE are defined and described. FMT_SMR.1 Management - The TOE provides the roles specified in the SFR. When a User Account is created or modified, the role is specified by setting or clearing the Global Administrator status for the user. FPT_TDC.1 System Information Import - The TOE provides the functionality to import asset data information from Active Directory (LDAP servers) or NT Domains and correctly interpret the information. Table 24 - SFR to TSF Rationale Document Version 1.0 © McAfee Page 40 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 7 TOE Summary Specification 7.1 Policy Enforcement The TOE protects sensitive information from being disclosed through various channels, including email, print, or copy to an external storage device. Protection rules control the flow of data by defining the action taken when an attempt is made to transfer or transmit sensitive data. Protection Rules link actions with definitions, tags and content categories, and user assignment groups. Protection rules define the action taken when an attempt is made to transfer or transmit tagged data. The protection rule specifies the transfer method, named tag(s), and how the system should react to the event. Each event is given a severity level, and options for responding to the event. In some cases, protection rules merely log the event. In other cases, the protection rules may prevent the transfer of data and notify the user of the violation. Protection rules are optionally applied to assignment groups. This allows a rule to apply only to particular user groups. Forres mn RS A = = iy = fe} tb © E 3 3 „5 Pr S 2 > Fe is} | oS = g © S 6 5 os Fr = Zz [3 a Plug and Play device rules v v v Removable storage device rules v v v v Application file access protection rules Tv Clipboard protection rules v Email protection rules v v v v v File system protection rules v v v v Network communication protection rules v y PDF/Image Writer protection rules v Tv Printing protection rules v v v v Removable storage protection rules viv v [lv v Screen capture protection rules v v v v Web post protection rules v v v v v Discovery rules v v v v v v Table 25 - Rules and their actions After creating the rules and definitions required for the enterprise, they must be enforced by assigning the policy to managed computers. Once the policy is in place, the Host DLP Monitor is used to audit the state of the enterprise’s sensitive information. Using McAfee Host Data Loss Prevention software involves the following tasks: Document Version 1.0 © McAfee Page 41 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 * Assigning policy — Deploying the Host DLP policy to managed computers. * Monitoring events — Using the Host DLP Monitor to audit, view, filter, and sort events in the enterprise network. * Performing administrative maintenance — Keeping the DLP Agents up-to-date and generating agent override, agent uninstall, and quarantine release keys as required. The table below shows the predefined dashboards and available functions for the Policy Enforcement TSF: NAME DESCRIPTION Agent Distribution by Date Displays how many agents are installed per day. Agent version Displays the distribution of agents in the enterprise. Used to monitor agent deployment progress. Bypassed agents Displays how many Host DLP nodes are in policy bypass mode. This is a real-time view that refreshes when a bypass begins or expires. Enforced Device Control Rules Displays the number of computers enforcing each device control rule. Drill down to view which rules are being enforced on which users. Enforced Protection Rules Displays the number of computers enforcing each protection rule. Event collector distribution Shows how many nodes report to each event collector server. Useful in the case of a multiple event collector setup. Evidence Path Distribution Displays the different evidence shares used by the agents. Useful when there are several different agent configurations. Policy Distribution Displays the Host DLP policy distribution throughout the enterprise. Used to monitor progress when deploying a new policy. Privileged Permissions Displays the current privileged Host DLP users. It allows drill down to view normal Host DLP users as well as users with “monitor only” permissions, and users allowed to bypass all Host DLP events. Table 26 - Predefined DLP Dashboards 7.2 Identification Users must log in to ePO with a valid user name and password supplied via a GUI before any access is granted by the TOE to TOE functions or data. When the credentials are presented by the user, ePO determines if the user name is defined and enabled. If not, the login process is terminated and the login GUI is redisplayed. The supplied password is passed to Windows for validation. If it is successful, the TOE grants access to additional TOE functionality. If the validation is not successful, the login GUI is redisplayed. Note that all the Windows I&A protection mechanisms (e.g., account lock after multiple consecutive login failures) that may be configured still apply since Windows applies those constraints when performing the validation. Document Version 1.0 McAfee Page 42 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Upon successful login, the Global Administrator status and the union of all the permissions from the permission sets from the user account configuration are bound to the session. Those attributes remain fixed until the user refreshes their session. 7.3 Management The TOE’s Management Security Function provides administrator support functionality that enables a user to configure and manage TOE components. Management of the TOE may be performed via the ePO GUI. Management permissions are defined per-user. The TOE provides functionality to manage the following: ePO User Accounts, Permission Sets, Audit Log, Event Log, 1 2 3 4 5. Notifications, 6. Event Filtering, 7. System Tree, 8. DLP Policies and Rules, 9. Queries, 10. Dashboards. Each of these items is described in more detail in the following sections. 7.3.1 ePO User Account Management Each user authorized for login to ePO must be defined with ePO. Only Global Administrators may perform ePO user account management functions (create, view, modify and delete). For each defined account, the following information is configured: 1. User name 2. Enabled or disabled 3. Whether authentication for this user is to be performed by ePO or Windows (the evaluated configuration requires Windows authentication for all users) 4. Permission sets granted to the user 5. Global Administrator status One or more permission sets may be associated with an account. Global Administrators are granted all permissions. Document Version 1.0 McAfee Page 43 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Permissions exclusive to global administrators (i.e., not granted via permission sets) include: Change server settings. Create and delete user accounts. Create, delete, and assign permission sets. Pe YM Pr Limit events that are stored in ePolicy Orchestrator databases. 7.3.2 Permission Set Management A permission set is a group of permissions that can be granted to any users by assigning it to those users’ accounts. One or more permission sets can be assigned to any users who are not global administrators (global administrators have all permissions to all products and features). Permission sets only grant rights and access — no permission ever removes rights or access. When multiple permission sets are applied to a user account, they aggregate. For example, if one permission set does not provide any permissions to server tasks, but another permission set applied to the same account grants all permissions to server tasks, that account has all permissions to server tasks. When a new ePO product extension (e.g., HDLP) is installed it may add one or more groups of permissions to the permission sets. Initially, the newly added section is listed in each permission set as being available but with no permissions yet granted. The global administrators can then grant permissions to users through existing or new permission sets. Global administrators may create, view, modify and delete permission sets. Each permission set has a unique name so that it can be appropriately associated with ePO users. When a permission set is created or modified, the permissions granted via the permission set may be specified by a global administrator. 7.3.3 Audit Log Management A global administrator may configure the length of time Audit Log entries are to be saved. Entries beyond that time are automatically purged. If the database space is exhausted, new entries are discarded and an SNMP trap is generated. 7.3.4 Event Log Management Aglobal administrator may configure the length of time DLP policy audit event records are to be saved. Entries beyond that time are automatically purged. The DLP policy audit event records may also be purged manually by a global administrator using a GUI to specify that all events older than a specified date are to be deleted. This is a one-time operation and the date specified is independent of the time period specified for automatic purging. Document Version 1.0 McAfee Page 44 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 7.3.5 Notification Management Notifications may be specified in response to events generated by the TOE. Notifications cause email messages to be sent to the configured recipient(s) or SNMP traps to be generated. Aglobal administrator may configure the SMTP server name and port used to send email or the destination(s) for SNMP traps. Credentials may optionally be specified if authentication is to be performed with the email server. A global administrator or user with the “Create and edit contacts” permission may create, view, edit and delete contacts. Each contact includes a first name, last name and email address. The contacts are used in email notifications; any global administrator or user with the “Use contacts” permission may cause a notification to be sent to the specified contact for that notification. A global administrator or user with the appropriate permissions (see below) may configure independent rules at different levels of the System Tree. The rules specify when and what type of notification should be sent under what conditions. The permissions associated with Notification management are: 1. View notification rules and Notification Log - This permission also grants the ability to view SNMP servers, registered executables, and external commands. 2. Create and edit notification rules; view Notification Log - This permission also grants the ability to view SNMP servers, registered servers, and external commands. 3. Create and edit notification rules; view and purge Notification Log; create and edit SNMP servers and external commands The sending of notification messages can be configured by setting thresholds based on aggregation and throttling. Aggregation determines the thresholds of events at which the rule sends a notification message. Once the rule is configured for notification, throttling can contain the number of notification messages. Once associated with a group or system, notification rules may be enabled and disabled by a global administrator or user with the “Create and edit contacts” permission. 7.3.6 Event Filtering Management Aglobal administrator may view and modify the list of events that are forwarded from the agents to the ePO server. The list of events is common to all agents. 7.3.7 System Tree Management The System Tree organizes managed systems in units for monitoring, assigning policies, scheduling tasks, and taking actions. The System Tree is a hierarchical structure that allows organization of systems within units called groups. Document Version 1.0 McAfee Page 45 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 Groups have these characteristics: 1. Groups can be created by global administrators or users with both the “View "System Tree" tab” and “Edit System Tree groups and systems” permissions. 2. Agroup can include both systems and other groups. 3. Groups are modified or deleted by a global administrator or user with both the “View "System Tree" tab” and “Edit System Tree groups and systems” permissions. The System Tree root includes a Lost&Found group. Depending on the methods for creating and maintaining the System Tree, the server uses different characteristics to determine where to place systems. The Lost&Found group stores systems whose locations could not be determined. The Lost&Found group has the following characteristics: It can't be deleted. It can't be renamed. Its sorting criteria can't be changed (although sorting criteria for subgroups can be created) It always appears last in the list and is not alphabetized among its peers. All users with view permissions to the System Tree can see systems in Lost&Found. py Fw NN bP When a system is sorted into Lost&Found, it is placed in a subgroup named for the system’s domain. If no such group exists, one is created. Child groups in the System Tree hierarchy inherit policies set at their parent groups. Inheritance is enabled by default for all groups and individual systems that are added to the System Tree. Inheritance may be disabled for individual groups or systems by a Global Administrator. Inheritance can be broken by applying a new policy at any location of the System Tree (provided a user has appropriate permissions). Users can lock policy assignments to preserve inheritance. Groups may be created manually or automatically (via synchronization with Active Directory or NT Domains). Systems may be deleted or moved between groups by a Global Administrator or user with both the “View "System Tree" tab” and “Edit System Tree groups and systems” permissions. 7.3.8 DLP Policy Management A product policy is a collection of settings that are created, configured, and then enforced. Product policies ensure that McAfee Agent and HDLP are configured and perform accordingly on the managed systems. Different product policies for the same product may be configured for different groups. When product policy settings are reconfigured, the new settings are delivered to, and enforced on, the managed systems at the next agent-server communication. The permissions associated with product policy management are: 1. View settings (McAfee Agent) - This permission grants the ability to view settings for the McAfee Agent product policy. Document Version 1.0 © McAfee Page 46 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 2. View settings (HDLP Agent) - This permission grants the ability to view settings for the HDLP Agent product policy. 3. View and change settings (McAfee Agent) - This permission grants the ability to view, create, delete, enable and modify settings for the McAfee Agent product policy. 4. View and change settings (HDLP Agent) - This permission grants the ability to view, create, delete, enable and modify settings for the HDLP Agent product policy. Product policies are applied to any group or system by one of two methods, inheritance or assignment. Inheritance determines whether the product policy settings for a group or system are taken from its parent. By default, inheritance is enabled throughout the System Tree. When this inheritance is broken by assigning new product policies anywhere in the System Tree, all child groups and systems that are set to inherit the product policy from this assignment point do so. A Global Administrator can assign any product policy in the Policy Catalog to any group or system. Assignment allows the definition of product policy settings once for a specific need and then the application of the product policy to multiple locations. All product policies are available for use by any user, regardless of who created the product policy. To prevent any user from modifying or deleting other users’ named product policies, each product policy is assigned an owner — the user who created it. Ownership provides that no one can modify or delete a product policy except its creator or a global administrator. When a product policy is deleted, all groups and systems where it is currently applied inherit the product policy of their parent group. Once associated with a group or system, enforcement of individual product policies may be enabled and disabled by a global administrator. 7.3.9 Query Management Users may create, view, modify, use and delete queries based upon their permissions. Permissions associated with queries are: 1. Use public queries — Grants permission to use any queries that have been created and made public. 2. Use public queries; create and edit personal queries — Grants permission to use any queries that have been created and made public by users with the same permissions, as well as the ability to create and edit personal queries. 3. Edit public queries; create and edit personal queries; make personal queries public — Grants permission to use and edit any public queries, create and modify any personal queries, as well as the ability to make any personal query available to anyone with access to public queries. Document Version 1.0 © McAfee Page 47 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 7.3.10 Dashboard Management User-specific dashboards may be configured to display data of interest to each user; these chart-based displays are updated at a configured rate to keep the information current. Permissions relevant to dashboards are: 1. Use public dashboards 2. Use public dashboards; create and edit personal dashboards 3. Edit public dashboards; create and edit personal dashboards; make personal dashboards public 74 Audit The Audit Log maintains a record of ePO user actions. The auditable events are specified in Table 16 — Audit Events and Details. The Audit Log entries display in a sortable table. For added flexibility, the log can be filtered so that it only displays failed actions, or only entries that are within a certain age. The Audit Log displays seven columns: 1. Action — The name of the action the ePO user attempted. 2. Completion Time — The date and time the action finished. 3. Details — More information about the action. 4. Priority — Importance of the action. 5. Start Time — The date and time the action was initiated. 6. Success — Specifies whether the action was successfully completed. 7. User Name — User name of the logged-on user account that was used to take the action. Audit Log entries can be queried against by a Global Administrator or users with the “View Audit Log” permission. The Audit Log entries are automatically purged based upon a Global Administrator- configured age. Other than automatic purging, no mechanisms are provided for users to modify or delete entries. The audit log entries are stored in the database; if space is exhausted, new entries are discarded. Additionally, the TOE provides the following DLP Information Flow Control SFP events: KITTS DESCRIPTION Block and Block Write Device Events Displays device events that were blocked or write- blocked. Daily Events distribution by Severity Displays a day's events ordered by severity. Enforced Discovery Rules Displays the number of computers enforcing each discovery rule. Events by Event Type Displays the number of events for each event type Document Version 1.0 © McAfee Page 48 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 KITTS DESCRIPTION Events by Protection/Discovery Rule by Date | Displays the number of events for each rule, for different dates. Events by Protection Rule Displays the number of events for each rule. Events by Severity Displays the number of events for each severity level. Events by Tag and Category Displays the number of events for each tag and content category that they recognize. Undefined Device Classes Lists and shows a bar graph of the devices whose device class cannot be determined. Unmanaged Printers Lists and shows a bar graph ofthe unmanaged (whitelisted) printers and the number of nodes attached to each. Clicking either a listed printer or a bar on the graph drills down to a list of the computers connected to it. Clicking on a computer drills down to the properties of the computer. Table 27 — Predefined DLP Event Reports 7.5 System Information Import ePO offers integration with both Active Directory and NT domains as a source for systems, and even (in the case of Active Directory) as a source for the structure of the System Tree. Active Directory synchronization can be used to create, populate, and maintain part or all of the System Tree with Active Directory synchronization. Once defined, the System Tree is updated with any new systems (and subcontainers) in Active Directory. There are two types of Active Directory synchronization (systems only and systems and structure) that can be used based on the desired level of integration with Active Directory. With each type, the following synchronization options are available: 1. Deploy agents automatically to systems new to ePolicy Orchestrator. 2. Delete systems from ePolicy Orchestrator (and remove their agents) when they are deleted from Active Directory. 3. Prevent adding systems to the group if they exist elsewhere in the System Tree. 4. Exclude certain Active Directory containers from the synchronization. These containers and their systems are ignored during synchronization. The System Tree can be populated with the systems in the NT domain. When synchronizing a group to an NT domain, all systems from the domain are put in the group as a flat list. Those systems can be managed in a single group or via subgroups for more granular organizational needs. When systems are imported, their placement in the System Tree may be automatically determined by criteria-based sorting of two forms. IP address sorting may be used if IP address organization coincides Document Version 1.0 McAfee Page 49 of 50 Security Target: McAfee Host Data Loss Prevention 9.2 and ePolicy Orchestrator 4.6 with the management needs for the System Tree. Tag based sorting may be used to sort systems based on tags associated with them. The server has three modes for criteria-based sorting: 1. Disable System Tree sorting 2. Sort systems on each agent-server communication — Systems are sorted again at each agent- server communication. When the sorting criteria on groups is changed, systems move to the new group at their next agent-server communication. 3. Sort systems once — Systems are sorted at the next agent-server communication and marked to never be sorted again. Document Version 1.0 © McAfee Page 50 of 50