Document Security V6.0 Security Target Lite V1.2 SoftCamp Co., Ltd. 3F~4F, 6 Seongnam-daero 779beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 13487 Republic of Korea Phone: 1644-9366 Fax: 031-697-4598 www.softcamp.co.kr The Security Target related to the certified TOE. This Security Target is written in korean and translated from Korean into English. Security Target CopyrightSoftCamp Co., Ltd. Page 2 of 76 Table of Contents 1. ST Introduction...................................................................................................................................................................5 1.1 ST reference............................................................................................................................................................5 1.2 TOE reference.........................................................................................................................................................5 1.3 TOE overview..........................................................................................................................................................6 1.3.1 TOE usage and major security features ................................................................................................6 1.3.2 TOE type ..............................................................................................................................................................7 1.3.3 Non-TOE Hardware/Software/Firmware identification...................................................................8 1.4 TOE description.................................................................................................................................................. 11 1.4.1 Physical scope of the TOE........................................................................................................................ 11 1.4.2 Logical scope of the TOE.......................................................................................................................... 12 1.5 Terms and definitions...................................................................................................................................... 14 1.6 Conventions......................................................................................................................................................... 20 2. Conformance claim........................................................................................................................................................ 22 2.1 CC conformance claim.................................................................................................................................... 22 2.2 PP conformance................................................................................................................................................. 22 2.3 Package conformance claim ........................................................................................................................ 22 3. Security objectives ......................................................................................................................................................... 23 3.1 Security objectives for the operational environment....................................................................... 23 4. Extended components definition............................................................................................................................ 24 4.1 Cryptographic support ................................................................................................................................... 24 4.1.1 Random Bit Generation............................................................................................................................. 24 4.1.1.1 FCS_RBG.1 Random bit generation...................................................................................................... 24 4.2 Identification & authentication................................................................................................................... 24 4.2.1 TOE Internal mutual authentication..................................................................................................... 24 4.2.1.1 FIA_IMA.1 TOE Internal mutual authentication............................................................................... 25 4.3 Security Management..................................................................................................................................... 25 4.3.1 ID and password........................................................................................................................................... 25 4.3.1.1 FMT_PWD.1 Management of ID and password ............................................................................. 26 4.4 Protection of the TSF....................................................................................................................................... 26 4.4.1 Protection of stored TSF data ................................................................................................................ 26 4.4.1.1 FPT_PST.1 Basic protection of stored TSF data .............................................................................. 27 4.4.1.2 FPT_PST.2 TSF Availability protection of TSF data ........................................................................ 27 4.4.2 TSF update....................................................................................................................................................... 28 4.4.2.1 FPT_TUD.1 TSF security patch update................................................................................................. 28 4.5 TOE Access ........................................................................................................................................................... 28 Security Target CopyrightSoftCamp Co., Ltd. Page 3 of 76 4.5.1 Session locking and termination........................................................................................................... 28 4.5.1.1 FTA_SSL.5 Management of TSF-initiated sessions ........................................................................ 29 5. Security requirements................................................................................................................................................... 30 5.1 Security functional requirements............................................................................................................... 30 5.1.1 Security audit (FAU)..................................................................................................................................... 31 5.1.2 Cryptographic support (FCS) .................................................................................................................. 35 5.1.3 User data protection (FDP) ...................................................................................................................... 40 5.1.4 Identification and authentication (FIA)............................................................................................... 43 5.1.5 Security management (FMT) ................................................................................................................... 44 5.1.6 Protection of the TSF (FPT)...................................................................................................................... 49 5.1.7 TOE access (FTA) ........................................................................................................................................... 50 5.2 Security assurance requirements ............................................................................................................... 52 5.2.1 Security Target evaluation........................................................................................................................ 52 5.2.2 Development .................................................................................................................................................. 56 5.2.3 Guidance documents.................................................................................................................................. 57 5.2.4 Life-cycle support......................................................................................................................................... 58 5.2.5 Tests .................................................................................................................................................................... 59 5.2.6 Vulnerability assessment........................................................................................................................... 60 5.3 Security requirements rationale ................................................................................................................. 61 5.3.1 Dependency rationale of security functional requirements ..................................................... 61 5.3.2 Dependency rationale of security assurance requirements...................................................... 63 6. TOE Specificaion summary......................................................................................................................................... 64 6.1 Security audit (FAU).......................................................................................................................................... 64 6.2 Cryptographic support (FCS)....................................................................................................................... 66 6.3 User data protection (FDP)........................................................................................................................... 70 6.4 Identification and Authentication (FIA)................................................................................................... 72 6.5 Security management(FMT) ......................................................................................................................... 73 6.6 Protection of the TSF (FPT)........................................................................................................................... 74 6.7 TOE Access (FTA) ............................................................................................................................................... 76 Security Target CopyrightSoftCamp Co., Ltd. Page 4 of 76 Revision History Version Revision Author Date revised V1.0 Initial release Eun Seung-hyun 2022-05-15 V1.1 Updated TOE Version - Updated TOE(Server) detailed version and Installation file version (V6.0.0.1 → V6.0.0.2) - Updated TOE(preparation procedure) version (V1.0 → V1.1) Eun Seung-hyun 2022-08-30 V1.1 Updated TOE Version - Updated TOE(Server) detailed version and Installation file version (V6.0.0.2 → V6.0.0.3) Eun Seung-hyun 2022-10-12 Security Target CopyrightSoftCamp Co., Ltd. Page 5 of 76 1. ST Introduction This document is the Security Target, or referred to as ST, of Document Security V6.0, an electronic document encryption product from SoftCamp Co., Ltd. It defines the security functional requirements and security assurance requirements of the TOE, describes security objectives, IT security requirements, and the TOE summary specification, and provides the relevant rationale. This ST consists of the following. Chapter 1.: It provides the basic information of the TOE in ST, and identifies the TOE through TOE reference, TOE overview, and TOE description. Chapter 2.: It describes the TOE’s conformance with Common Criteria, Protection Profile and Package, and provides the relevant rationale. Chapter 3.: It describes the security objectives for the TOE and for the environment, and provides the relevant rationale. Chapter 4.: It explains the definition of extended components. Chapter 5.: It describes the security requirements and the security assurance requirements for the TOE, and provides the relevant rationale. Chapter 6.: It describes the TOE summary specification defined in Chapter 5., and provides its rationale. 1.1 ST reference Item Description Title Document Security V6.0 Security Target ST Version V1.2 Author SoftCamp Co., Ltd. Publication Date 2022.10.12 Common Criteria Common Criteria for Information Technology Security Evaluation (Ministry of Science, ICT and Future Planning, Notice No. 2013-51) Common Criteria Version V3.1 r5 Evaluation Assurance Level EAL1+(ATE_FUN.1) Keywords Document, Encryption [Table 1-1] ST reference 1.2 TOE reference Information that uniquely identifies and controls the TOE is as follows. Security Target CopyrightSoftCamp Co., Ltd. Page 6 of 76  TOE Identification : Document Security V6.0  TOE Version : V6.0.0.3  TOE Components & version Item TOE Components Version Document Security V6.0 Document Security Server V6.0 V6.0.0.3 Document Security Client V6.0 V6.0.0.1 Document Security Console V6.0 V6.0.0.1 Guidance Documents Document Security V6.0 Preparative Procedures (PRE) V1.1 Document Security V6.0 Manager Guidance (OPE_A) V1.0 Document Security V6.0 User Guidance (OPE_U) V1.0 - [Table 1-2] TOE Components & version 1.3 TOE overview Chapter 1.3 explains the usage, major security features and types of the TOE, as well as non-TOE hardware/software/firmware. 1.3.1 TOE usage and major security features Document Security V6.0 (hereinafter “TOE”) encrypts electronic documents to protect important documents managed by the organization according to the policy set by the administrator, and a document is decrypted according to the document user’s request and right. The TOE provides security audit function that records and reviews major events while carrying out security function or management function, identification & autehntification function such as identification for administrator and document user, authentication failure processing, and mutual authentication among the TOE components, security management function for the definition of security function, role, and configuration, protecting function to protect data stored in repository controlled by TSF, TSF protection function like TSF’s self-test, and TOE access function to manage the access session of the authorized administrator. The TOE also controls the authority for use of documentsd, blocks a non-authorized access, and protects the organization’s important documents through encryption, user authentication, and the control of authority for use for each file. . The key functions of each TOE component are as follows.  Document Security Server V6.0 Security Target CopyrightSoftCamp Co., Ltd. Page 7 of 76 Document Security Server V6.0 (hereinafter "Server"), installed in the management server, issues and manages cryptographic keys used in the TOE, creates audit logs related to security policy management, the authentication of administrator and document user, and security management function, and collects the audit logs generated in each component of the TOE. Server stores the key values of policy configuration and audit logs in DBMS interoperated with the Server.  Document Security Client V6.0 Document Security Client V6.0 (hereinafter “Client”) is installed in document user’s PC to perform document encryption/decryption according to administrator’s policy distributed from Server. Users have to go through document user identification and authentication to use documents. Client receives policy such as document encryption/decryption, document access, print marking and application function restriction set by administrator from Server and applies it to document user.  Document Security Console V6.0 Document Security Console V6.0 (hereinafter “Console”) is installed in administrator’s PC to provide the TOE’s authorized administrator with security management interface. Through Console, administrator creates a user account that can use the Client and sets policy and authorities for the TOE’s security functions, such as electronic document encryption policy. The policy set by administrator is transmitted to Server through Console and stored in the Server’s DBMS. 1.3.2 TOE type The TOE is “Electronic Document Encryption” that prevents information leakage by encrypting/decrypting important documents within the organization and is provided as software. The TOE supports “user device encryption” type depending on the operation type. Security Target CopyrightSoftCamp Co., Ltd. Page 8 of 76 [Figure 1-1] TOE operational environment of “user device encryption” type [Figure 1-1] represents the operational environment of “user device encryption” type among other TOE operational environments. In the “user device encryption” type, the TOE is composed of Server that is installed in management server to manage security policy and cryptographic key, Client that is installed in user’s PC to perform the encryption/decryption of documents, and Console that is installed in administrator’s PC to provide security management interface. Administrator sets policy for each document user through Console, and Server distributes the policies and cryptographic keys set by administrator to Client. Client installed in user PC performans document encryption/decryption by using validated cryptographic module according to the distributed policy, and the encrypted or decrypted document is stored as a file in the user PC. In the event of a potential violation, mail server is used as an external IT entity to notify the authorized administrator. 1.3.3 Non-TOE Hardware/Software/Firmware identification Although additional hardware and software are required for the operation of the TOE, those are not included in the TOE. The requirements of hardware and software for the operation of the TOE are as follows. Security Target CopyrightSoftCamp Co., Ltd. Page 9 of 76 (1) Requirement specification of Server’s hardware and 3rd party software TOE Type Requirement Document Security Server V6.0 CPU Intel(R) Xeon(R) E-2226G CPU @ 3.40GHz or higher HDD Space required for TOE installation is 20GB or higher RAM 8GB or higher NIC 10/100/1000 Mbps Ethernet Card 1 Port or higher OS Ubuntu Linux release 20.04 LTS (Linux Kernel 5.4, 64bit) S/W JRE 1.8 MariaDB 10.6 [Table 1-3] Requirement specification of Server’s hardware and software (2) Requirement specification of Client’s hardware and 3rd party software TOE Type Requirement Document Security Client V6.0 CPU Intel(R) Pentium(R) Dual CPU E2200 @ 2.20 GHz or higher HDD Space required for TOE installation is 20GB or higher RAM 4GB or higher NIC 10/100/1000 Mbps Ethernet Card 1 Port or higher OS Windows 8.1 32 bit, 64 bit Windows 10 Pro 32 bit, 64 bit Windows 10 Enterprise 32 bit, 64 bit S/W Microsoft Visual C++ 2008 redistributable 9.0.30729.4148 MS Notepad, MS Wordpad, MS Paint Microsoft Office 2010, 2013, 2016, 365 Hancom Office 2010, 2014(VP), NEO, 2018 Acrobat Reader DC, Acrobat Pro 2017, DC [Table 1-4] Requirement specification of Client’s hardware and software (3) Requirement specification of Console’s hardware and 3rd party software TOE Type 사양 Document Security Console V6.0 CPU Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz or higher HDD Space required for TOE installation is 10GB or higher RAM 4GB or higher NIC 10/100/1000 Mbps Ethernet Card 1 Port or higher OS Windows 8.1 32 bit, 64 bit Windows 10 Pro 32 bit, 64 bit Windows 10 Enterprise 32 bit, 64 bit Security Target CopyrightSoftCamp Co., Ltd. Page 10 of 76 S/W Microsoft Visual C++ 2008 redistributable 9.0.30729.4148 [Table 1-5] Requirement specification of Console’s hardware and software (4) Identification and description of 3rd party software 3rd Party Software Description MariaDB 10.6 DBMS to store the audit log and policy of TOE JRE 1.8 Java runtime environment [Table 1-6] Identification and description of 3rd party software (5) External IT entity that interacts with other TOE besides the evaluation target TOE External IT Entity Description Mail Server Server that sends a mail to authorized administrator upon a potential security violation detected [Table 1-7] External IT Entity (6) Document type by word processing program supported by electronic document encryption Word processing program Main file format (extension) Hancom Office hwp MS Office Word. doc, docx MS Office Powerpoint ppt, pptx MS Office Excel xls, xlsx Adobe Acrobat pdf Notepad txt Wordpad rtf Mspaint bmp, jpg, png, gif [Table 1-8] Types of documents supported by electronic document encryption Security Target CopyrightSoftCamp Co., Ltd. Page 11 of 76 1.4 TOE description This section describes the physical and logical ranges of the TOE. 1.4.1 Physical scope of the TOE The physical scope of the TOE consists of the TOE’s components, namely Document Security Server V6.0, Document Security Client V6.0 and Document Security Console V6.0 as well as guidance documents such as Document Security V6.0 Preparative Procedures and Document Security V6.0 Operational Guidance, which are included in the product, Document Security V6.0. The TOE is offered in the form of software. The hardware platform and operating system on which TOE is installed, and the DBMS required to operate the TOE are excluded from the physical scope of the TOE. Item TOE Components Distribution Type Method Document Security V6.0 Document Security Server V6.0 - SCDS_Server_6.0.0.3.bin bin CD Document Security Client V6.0 - SCDS_Client_6.0.0.1.exe - SCDS_Client_6.0.0.1_x64.exe exe Document Security Console V6.0 - SCDS_Console_6.0.0.1.exe - SCDS_Console_6.0.0.1_x64.exe exe Guidance Documents Document Security V6.0_Preparative Procedures (PRE)_V1.1.pdf Document Security V6.0_Manager Guidance (OPE_A) _V1.0.pdf Document Security V6.0_User Guidance (OPE_U) _V1.0.pdf pdf CD [Table 1-9] Physical scope of the TOE Additionally, the validated cryptographic modules required to perform the encryption/decryption functions provided by the TOE are as follows, and such modules are also within the TOE scope. Item Description Cryptographic module name SCCrypto V1.0 MagicJCrypto V3.0.0 Validation No. CM-194-2026.11 CM-200-2026.12 Validation Grade VSL1 VSL1 Security Target CopyrightSoftCamp Co., Ltd. Page 12 of 76 Developed company SoftCamp Co., Ltd. DreamSecurity Co.,Ltd Validation Date 2021-11-18 2021-12-31 Effective Expiration Date 2026-11-18 2026-12-31 [Table 1-10] Validated cryptographic modules 1.4.2 Logical scope of the TOE [Figure 1-2] Logical scope of the TOE ⚫ Security audit The TOE generates and records audit records for defined auditable events. When audit records are generated, the occurrence time, category, subject information, and processing result of the auditable event are recorded. Server stores audit data it generates and those it receives from Client in DBMS. Also, it provides the function for authorized administrator to view audit data. When potential security violence is detected, the TOE performs a response action for the relevant act. The TOE provides the function to notify authorized administrator of the relevant information via a mail when the amount of audit trail exceeds the predefined limits. When the audit trail reaches more than 80% of the predefined limit, it sends a warning mail to the administrator, and when the audit trail is full, it sends a warning mail to the administrator Security Target CopyrightSoftCamp Co., Ltd. Page 13 of 76 after deleting the oldest stored audit data. ⚫ Cryptographic support The TOE provides functions to generate, distribute and destruct cryptographic key, as well as cryptographic operation function for the protection of data transmitted among the TOE components, the protection of TSF data, and document encryption/decryption. The TOE generates and distributes a cryptographic key, and performs the cryptographic operation, by using the TOE cryptographic algorithm of the validated cryptographic modules, namely ‘MagicJCrypto V3.0.0‘ and ‘SCCrypto V1.0’, whose security and implementation conformance are validated by the Korea Cryptographic Module Validation Program (KCMVP). If the cryptographic key is not used anymore, it is destructed. The cryptographic key used in document encryption/decryption is destructed when the encrypted or decrypted document is deleted, while the cryptographic keys created for other purposes are destructed through Zeroization where the key is overwritten by 0. ⚫ User data protection Through access control policy, the TOE controls read, readable counts, edit, decrypt, print, print marking, authority change, and expiration of documents to be protected according to document user, document user group and category. In the TOE, document user shall go through user identification and authentication and comply with access control policy set by administrator, in order to access to documents and use them. ⚫ Identification and authentication The TOE performs mutual verification using Internally Implemented Mutual Authentication Protocol between its components, and verifies the identity of administrator and document user based on ID/password. Password shall be not less than 9 digits in combination of alphabet letter, number, and special character. If administrator or document user fails authentication attempts for five consecutive times during identification and authentication, the administrator or user shall try to access after five minutes as the access of the relevant account is blocked for five minutes. The TOE shall mask password to make it unrecognizable on the screen for the sake of protected authentication feedback. Also, when user identification or authentication fails, the TOE shall not provide the feedback for the cause of the failure. The TOE ensures the uniqueness of a session ID using time stamp to prevent the reuse of authentication data. ⚫ Security management The TOE provides security management function for authorized manager to set and manage security policy and key data. Authorized manager performs security management function Security Target CopyrightSoftCamp Co., Ltd. Page 14 of 76 through Console, and manages accounts, keys, policies, security management interface setting, password combination rules and password length. ⚫ Protection of the TSF The TOE conducts self-tests on the major processes during initial start-up or at regular intervals. It verifies the integrity of the TOE execution files during initial start-up or at regular intervals or upon authorized administrator’s request, and if the verification fails, notifies the administrator in real time. When TSF data is transmitted between separate parts of the TOE, validated cryptographic module is used to protect the data from disclosure and modification, and to protect the passwords of authorized manager and user, cryptographic key, critical security parameters, TOE configuration values (security policy and configuration parameters) and audit data, which are stored in TSF data storage, from unauthorized disclosure and modification. ⚫ TOE Access The TOE controls any access to the TOE by allowing only registered IP (one IP by default) to access the security management interface, and limits the number of cocurrent sessions up to 1 to block simultaneous access to the same account and and the same authority. When there is an attempt at simultaneous access, it blocks new connection and maintains the existing connection. The TOE terminates a session if there is no activity during a certain amount of idle time (five minutes by default) after authorized administrator logs in. 1.5 Terms and definitions Terms used in this ST, which are the same as in the CC, must follow those in the CC. Private Key A cryptographic key which is used in an asymmetric cryptographic algorithm and is uniquely associated with an entity (the subject using the private key), not to be disclosed. Access Control List, ACL The list including entities who are permitted to access the entity and the types of these Permission Approved cryptographic algorithm A cryptographic algorithm selected by Korea Cryptographic Module Validation Authority for block cipher, secure hash algorithm, message authentication code, random bit generation, key agreement, public key cipher, digital signatures cryptographic algorithms considering safety, reliability and interoperability Security Target CopyrightSoftCamp Co., Ltd. Page 15 of 76 Approved mode of operation The mode of cryptographic module using approved cryptographic algorithm. Assignment The specification of an identified parameter in a component (of the CC) or requirement Attack potential Measure of the effort to be expended in attacking the TOE, expressed in terms of an attacker's expertise, resources and motivation Augmentation Addition of one or more requirement(s) to a package Authentication Data Information used to verify the claimed identity of a user Authorized Administrator Authorized user to securely operates and manages the TOE, In the ST, Server manager(an authorized administrator who be able to perform the operation and management functions of a server.), chief console Manager(a super administrator of the console, an authorized administrator who be able to perform all of the security and management functions provided by the console), middle console manager (who added from the console by the chief console manager, an authorized administrator who be able to perform security and management functions only to the extent permitted by the chief console manager) Authorized Document User The TOE user who may, in accordance with the SFRs, perform an operation, In short, document users Classification A document identifier of document users for categories and mappings. Can/could The ‘can’ or ‘could’ presented in Application notes indicates optional requirements applied to the TOE by ST author’s choice Category Permission groups to grant the required level of operation (read, access counts, edit, decrypt, Security Target CopyrightSoftCamp Co., Ltd. Page 16 of 76 authority change, access period, auto destruction) to an object (document to be encrypted) by classifications Category Based Access Control As the one of the mandatory access control, performing the access control for the entity based on category identity. Class Set of CC families that share a common focus Component Smallest selectable set of elements on which requirements may be based Critical Security Parameters, CSP Security-related information whose disclosure or modification can compromise the security of a cryptographic module (e.g., secret and private cryptographic keys, authentication data such as passwords, PINs, certificates or other trust anchors) Data Encryption Key : DEK Key that encrypts and decrypts data, In the ST, there is a DEK used is document encryption key(encryption of document to be encrypted), document header encryption key (encryption of headers of encrypted documents), client configuration encryption key (encrypting the client's environment configuration file), server configuration encryption key (encrypting the server's environment configuration file), communication data encryption key (encryption of packets for secure communication). Decryption The act that restoring the ciphertext into the plaintext using the decryption key Dependency Relationship between components such that if a requirement based on the depending component is included in a PP, ST or package, a requirement based on the component that is depended upon must normally also be included in the PP, ST or package Document User Authorized Document User EAL, Evaluation Assurance Level Set of assurance requirements drawn from CC Part 3, representing a point on the CC predefined Security Target CopyrightSoftCamp Co., Ltd. Page 17 of 76 assurance scale, that form an assurance package Element Indivisible statement of a security need Encryption The act that converts the plaintext into the ciphertext using the encryption key External Entity Human or IT entity possibly interacting with the TOE from outside of the TOE boundary Family Set of components that share a similar goal but differ in emphasis or rigor Group Based Access Control As the one of the discretionary access control, performing the access control for the entity based on group identity Identity Representation uniquely identifying entities (e.g. user, process or disk) within the context of the TOE Iteration Use of the same component to express two or more distinct requirements KCMVP, Korea Cryptographic Module Validation Program A system to validate the security and implementation conformance of cryptographic modules used for the protection of important but not classified information among the data communicated through the information and communication network of the government and public institutions. Key Encryption Key : KEK Key that encrypts and decrypts another cryptographic key, In the ST, there is a KEK used is server encryption key(Key to encrypt document encryption keys on a per server, kind of master key) user encryption key(Key to encrypt document encryption keys on a per user), group encryption key(Key to encrypt document encryption keys on a per group), category encryption Key(Key to encrypt document encryption keys on a per category), client configuration key encryption key (Key to encrypt client configuration encryption key), server configuration key encryption key (Key to encrypt server configuration encryption key), database encryption Key (Key to encrypt keys stored in the DB), and communication data key encryption key (Key to encrypt communication data encryption key). Local access Security Target CopyrightSoftCamp Co., Ltd. Page 18 of 76 The access to the TOE by using the console port to manage the TOE by administrator, directly Object Passive entity in the TOE containing or receiving information and on which subjects perform operations Operation(on a component of the CC) Modification or repetition of a component. Allowed operations on components are assignment, iteration, refinement and selection. Operation(on a subject) Specific type of action performed by a subject on an object PP, Protection Profile Implementation-independent statement of security needs for a TOE type Private Key A cryptographic key which is used in an asymmetric cryptographic algorithm and is uniquely associated with an entity (the subject using the private key), not to be disclosed. Public Key A cryptographic key which is used in an asymmetric cryptographic algorithm and is associated with an unique entity (the subject using the public key), it can be disclosed Public Key (asymmetric) cryptographic algorithm A cryptographic algorithm that uses a pair of public and private keys Random bit generator : RBG A device or algorithm that outputs a binary string that is statistically independent and is not biased. The RBG used for cryptographic application generally generates 0 and 1 bit string, and the string can be combined into a random bit block. The RBG is classified into the deterministic and non- deterministic type. The deterministic type RBG is composed of an algorithm that generates bit strings from the initial value called a “seed key,” and the non-deterministic type RBG produces output that depends on the unpredictable physical source. Recommend/be recommended The ‘recommend’ or ‘be recommended’ presented in Application notes is not mandatorily recommended, but required to be applied for secure operations of the TOE Security Target CopyrightSoftCamp Co., Ltd. Page 19 of 76 Refinement Addition of details to a component Role Predefined set of rules establishing the allowed interactions between a user and the TOE Secret Key A cryptographic key which is used in a symmetric cryptographic algorithm and is uniquely associated with one or several entity, not to be disclosed Security Policy Document Document uploaded to the list of the validated cryptographic module with the module’s name and specifying the summary for the cryptographic algorithms and operational environments of the TOE Security Token Hardware device that implements key generation and electronic signature generation inside the device to save/store confidential information safely. Selection Specification of one or more items from a list in a component Self-tests Pre-operational or conditional test executed by the cryptographic module Sensitive Security Parameters, SSP Critical security parameter (CSP) and public security parameter (PSP) Server Manager Authorized administrators who can operate and manage server Shall/must The ‘shall’ or ‘must’ presented in Application notes indicates mandatory requirements applied to the TOE ST, Security Target Implementation-dependent statement of security needs for a specific identified TOE Subject Active entity in the TOE that performs operations on objects Symmetric cryptographic technique Security Target CopyrightSoftCamp Co., Ltd. Page 20 of 76 Encryption scheme that uses the same secret key in mode of encryption and decryption, also known as secret key cryptographic technique. TOE, Target of Evaluation Set of software, firmware and/or hardware possibly accompanied by guidance TSF Data Data for the operation of the TOE upon which the enforcement of the SFR relies TSF, TOE Security Functionality Combined functionality of all hardware, software, and firmware of the TOE that must be relied upon for the correct enforcement of the SFRs Unapproved mode of operation The mode of cryptographic module which can use both approved cryptographic algorithms and unapproved cryptographic algorithms User See “external entity”, a user means authorized administrator and authorized document user User Based Access Control As the one of the discretionary access control, performing the access control for the entity based on document user identity. Validated Cryptographic Module A cryptographic module that is validated and given a validation number by validation authority Word processing program Program used to process the important documents, such as generation, modification, manipulation, and print of documents (e.g., Hangul word processor, MS word processor, Acrobat, Excel, PowerPoint, etc.) 1.6 Conventions The notation, formatting and conventions used in this PP are consistent with the Common Criteria for Information Technology Security Evaluation. The CC allows several operations to be performed for functional requirements: iteration, assignment, selection and refinement. Each operation is used in this PP. Security Target CopyrightSoftCamp Co., Ltd. Page 21 of 76 Iteration Iteration is used when a component is repeated with varying operations. The result of iteration is marked with an iteration number in parenthesis following the component identifier, i.e., denoted as (iteration No.). Assignment This is used to assign specific values to unspecified parameters (e.g., password length). The result of assignment is indicated in square brackets like [assignment_value]. Selection This is used to select one or more options provided by the CC in stating a requirement. The result of selection is shown as underlined and italicized. Refinement This is used to add details and thus further restrict a requirement. The result of refinement is shown in bold text. Security Target (ST) Author This is used to represent the final decision of attributes being made by the ST author. The ST author's operation is denoted in braces, as in {decided by the ST author}. In addition, operations of SFR not completed in the Protection Profile must be completed by the ST author. “Application notes” is provided to clarify the intent of requirements, provide the information for the optional items in implementation, and define "Pass/Fail" criteria for a requirement. The application notes is provided with corresponding requirements if necessary. Security Target CopyrightSoftCamp Co., Ltd. Page 22 of 76 2. Conformance claim Conformance claim describes Common Criteria, Protection Profile and Package Conformance Claim which the ST complies with, and how the ST complies with the Protection Profile. 2.1 CC conformance claim This ST complies with Common Criteria for Information Technology Security Evaluation (Ministry of Science, ICT and Future Planning, Notice No. 2013-51) V3.1 R.5-2, and its extended version R.5-3.  Common Criteria identification - Common Criteria for Information Technology Security Evaluation. Part 1: Introduction and General Model, Version 3.1, Revision 5 (CCMB-2017-04-001, April, 2017) - Common Criteria for Information Technology Security Evaluation. Part 2: Security Functional Components, Version 3.1, Revision 5 (CCMB-2017-04-002, April, 2017) - Common Criteria for Information Technology Security Evaluation. Part 3: Security Assurance Components, Version 3.1, Revision 5 (CCMB-2017-04-003, April, 2017)  Common Criteria conformance type - Common Criteria for Information Technology Security Evaluation. Part 2 Extended (FCS_RBG.1, FIA_IMA.1, FMT_PWD.1, FPT_PST.1, FPT_PST.2, FPT_TUD.1, FTA_SSL.5) - Common Criteria for Information Technology Security Evaluation. Part 3 Conformant - Package Augmented: EAL1 Augmented (ATE_FUN.1) 2.2 PP conformance This ST complies with the ‘Korean National Protection Profile for Electronic Document Encryption V1.0(KECS-PP-0821-2017)’ as “strict PP conformance”. According to strict conformance method, TOE types, the purpose of security for the operating environment, and the security requirements are equally conformed. 2.3 Package conformance claim This Protection Profile claims conformance to assurance package EAL1 augmented with ATE_FUN.1. Security Target CopyrightSoftCamp Co., Ltd. Page 23 of 76 3. Security objectives This chapter describes the security objectives based on the security issues for the TOE operating environment. The following are the security objectives handled by technical and procedural method supported from operational environment in order to provide the TOE security functionality accurately. 3.1 Security objectives for the operational environment OE.PHYSICAL_CONTROL The place where the management server among the TOE components are installed and operated shall be equipped with access control and protection facilities so that only authorized administrator can access. OE.TRUSTED_ADMIN An authorized administrator of the TOE shall be non-malicious intentions users, have appropriately trained for the TOE management functions and accurately fulfill the duties in accordance with administrator guidances. OE.LOG_BACKUP The authorized administrator of the TOE shall periodically checks a spare space of audit data storage in case of the audit data loss, and carries out the audit data backup (external log server or separate storage device, etc.) to prevent audit data loss. OE.OPERATION_SYSTEM_REINFORCEMENT The authorized administrator of the TOE shall ensure the reliability and security of the operating system by performing the reinforcement on the latest vulnerabilities of the operating system in which the TOE is installed and operated. OE.TIMESTAMP The TOE shall accurately record security-relevant events by using reliable time stamps provided by the TOE operational environment. OE.AUDIT_DATA_PROTECTION Audit records with stored audit evidence, such as DBMS that interact with TOE, shall be protected from unauthorized deletion or modification. Security Target CopyrightSoftCamp Co., Ltd. Page 24 of 76 4. Extended components definition 4.1 Cryptographic support 4.1.1 Random Bit Generation Family Behaviour This family defines requirements for the TSF to provide the capability that generates random bits required for TOE cryptographic operation. Component leveling FCS_RBG.1 random bit generation, requires TSF to provide the capability that generates random bits required for TOE cryptographic operation. Management: FCS_RBG.1 There are no management activities foreseen. Audit: FCS_RBG.1 There are no auditable events foreseen. 4.1.1.1 FCS_RBG.1 Random bit generation Hierarchical to No other components. Dependencies No dependencies. FCS_RBG.1.1 The TSF shall generate random bits required to generate an cryptographic key using the specified random bit generator that meets the following [assignment: list of standards]. 4.2 Identification & authentication 4.2.1 TOE Internal mutual authentication Family Behaviour Security Target CopyrightSoftCamp Co., Ltd. Page 25 of 76 This family defines requirements for providing mutual authentication between TOE components in the process of user identification and authentication. Component leveling FIA_IMA.1 TOE Internal mutual authentication requires that the TSF provides mutual authentication function between TOE components in the process of user identification and authentication. Management: FIA_IMA.1 There are no management activities foreseen. Audit: FIA_IMA.1 The following actions are recommended to record if FAU_GEN Security audit data generation is included in the PP/ST: a) Minimal: Success and failure of mutual authentication 4.2.1.1 FIA_IMA.1 TOE Internal mutual authentication Hierarchical to No other components. Dependencies No dependencies. FIA_IMA.1.1 The TSF shall perform mutual authentication between [assignment: different parts of TOE] by [assignment: authentication protocol] that meet the following: [assignment: list of standards]. 4.3 Security Management 4.3.1 ID and password Family Behaviour This family defines the capability that is required to control ID and password management used in the TOE, and set or modify ID and/or password by authorized users. Component leveling Security Target CopyrightSoftCamp Co., Ltd. Page 26 of 76 FMT_PWD.1 ID and password management, requires that the TSF provides the management function of ID and password. Management: FMT_PWD.1 The following actions could be considered for the management functions in FMT: a) Management of ID and password configuration rules. Audit: FMT_PWD.1 The following actions are recommended to record if FAU_GEN Security audit data generation is included in the PP/ST: a) Minimal: All changes of the password. 4.3.1.1 FMT_PWD.1 Management of ID and password Hierarchical to No other components. Dependencies FMT_SMF.1 Specification of management functions FMT_SMR.1 Security roles FMT_PWD.1.1 The TSF shall restrict the ability to manage the password of [assignment:list of functions] to [assignment: the authorized identified roles]. 1. [assignment: password combination rules and/or length] 2. [assignment: other management such as management of special characters unusable for password, etc.] FMT_PWD.1.2 The TSF shall restrict the ability to manage the ID of [assignment: list of functions] to [assignment: the authorized identified roles]. 1. [assignment: ID combination rules and/or length] 2. [assignment: other management such as management of special characters unusable for ID, etc.] FMT_PWD.1.3 The TSF shall provide the capability for [selection, choose one of: setting ID and password when installing, setting password when installing, changing the ID and password when the authorized administrator accesses for the first time, changing the password when the authorized administrator accesses for the first time]. 4.4 Protection of the TSF 4.4.1 Protection of stored TSF data Security Target CopyrightSoftCamp Co., Ltd. Page 27 of 76 Family Behaviour This family defines rules to protect TSF data stored within containers controlled by the TSF from the unauthorized modification or disclosure. Component leveling FPT_PST.1 Basic protection of stored TSF data requires the protection of TSF data stored in containers controlled by the TSF. FPT_PST.2 Availability protection of TSF data requires the TSF to ensure the defined levels of availability for the TSF data. Management: FPT_PST.1, FPT_PST.2 There are no management activities foreseen. Audit: FPT_PST.1, FPT_PST.2 There are no auditable events foreseen. 4.4.1.1 FPT_PST.1 Basic protection of stored TSF data Hierarchical to No other components. Dependencies No dependencies. FPT_PST.1.1 The TSF shall protect [assignment: TSF data] stored in containers controlled by the TSF from the unauthorized [selection: disclosure, modification]. 4.4.1.2 FPT_PST.2 TSF Availability protection of TSF data Hierarchical to No other components. Dependencies No dependencies. FPT_PST.2.1 The TSF shall [selection: detect, prevent] the unauthorized deletion for [assignment: TSF data]. FPT_PST.2.1 The TSF shall [selection: detect, prevent] the unauthorized termination for [assignment: TSF data]. Security Target CopyrightSoftCamp Co., Ltd. Page 28 of 76 4.4.2 TSF update Family Behaviour This family defines TOE firmware/software update requirements. Component leveling FPT_TUD.1 TSF security patch update, requires trusted update of the TOE firmware/software including the capability to verify the validity on the update file before installing updates. Management: FPT_TUD.1 The following actions could be considered for the management functions in FMT: a) Management of update file verification mechanism Audit: FPT_TUD.1 The following actions are recommended to record if FAU_GEN Security audit data generation is included in the PP/ST: a) Minimal: Update file verification result (success, failure) 4.4.2.1 FPT_TUD.1 TSF security patch update Hierarchical to No other components. Dependencies No dependencies. FPT_TUD.1.1 The TSF shall provide the capability to view the TOE versions to [assignment: the authorized identified roles]. FPT_TUD.1.2 The TSF shall verify validity of the update files using [selection: hash value comparison, digital signature verification] before installing updates. 4.5 TOE Access 4.5.1 Session locking and termination Family Behaviour Security Target CopyrightSoftCamp Co., Ltd. Page 29 of 76 This family defines requirements for the TSF to provide the capability for TSF-initiated and user- initiated locking, unlocking, and termination of interactive sessions. Component leveling In CC Part 2, the session locking and termination family consists of four components. In this PP, it consists of five components by extending one additional component as follows. ※ The relevant description for four components contained in CC Part 2 is omitted. FTA_SSL.5 The management of TSF-initiated sessions, provides requirements that the TSF locks or terminates the session after a specified time interval of user inactivity. Management: FTA_SSL.5 The following actions could be considered for the management functions in FMT: a) Specification for the time interval of user inactivity that is occurred the session locking and termination for each user b) Specification for the time interval of default user inactivity that is occurred the session locking and termination Audit: FTA_SSL.5 The following actions are recommended to record if FAU_GEN Security audit data generation is included in the PP/ST: a) Minimal: Locking or termination of interactive session 4.5.1.1 FTA_SSL.5 Management of TSF-initiated sessions Hierarchical to No other components. Dependencies [FIA_UAU.1 authentication or No dependencies.] FTA_SSL.5.1 The TSF shall [selection: • lock the session and re-authenticate the user before unlocking the session, • terminate] an interactive session after a [assignment: time interval of user inactivity]. Security Target CopyrightSoftCamp Co., Ltd. Page 30 of 76 5. Security requirements The security requirements describe security functional requirements and assurance requirements that must be satisfied by the TOE 5.1 Security functional requirements The security function requirements defined in this Security Target are expressed by selecting the relevant security function components from CC Part 2 to satisfy the security objectives identified in Chapter 4. The following [Table 5-1] provides a summary of the security function components used in this Security Target. Security Functional Class Security Functional Component Security Audit (FAU) FAU_ARP.1 Security alarms FAU_GEN.1 Audit data generation FAU_SAA.1 Potential violation analysis FAU_SAR.1 Audit review FAU_SAR.3 Selectable audit review FAU_SEL.1 Selective audit FAU_STG.3 Action in case of possible audit data loss FAU_STG.4 Prevention of audit data loss Cryptographic Support (FCS) FCS_CKM.1(1) Cryptographic key generation(Electronic document encryption) FCS_CKM.1(2) Cryptographic key generation(TSF data encryption) FCS_CKM.1(3) Cryptographic key generation(Encryption by policy) FCS_CKM.1(4) Cryptographic key generation(Communication encryption) FCS_CKM.2 Cryptographic key distribution FCS_CKM.4 Cryptographic key destruction FCS_COP.1(1) Cryptographic operation(Electronic document encryption) FCS_COP.1(2) Cryptographic operation(TSF data encryption) FCS_COP.1(3) Cryptographic operation(Encryption by policy) FCS_COP.1(4) Cryptographic operation(Communication encryption) FCS_RBG.1(Extended) Random bit generation User Data Protection (FDP) FDP_ACC.1(1) Subset access control (Electronic Document Encryption access control) Security Target CopyrightSoftCamp Co., Ltd. Page 31 of 76 FDP_ACC.1(2) Subset access control (Document Usage access control) FDP_ACF.1(1) Security attribute based access control (Electronic Document Encryption access control) FDP_ACF.1(2) Security attribute based access control (Document Usage access control) Identification and Authentication (FIA) FIA_AFL.1 Authentication failure handling FIA_IMA.1(Extended) TOE internal mutual authentication FIA_SOS.1 Verification of secrets FIA_UAU.2 User authentication before any action FIA_UAU.4 Single-use authentication mechanisms FIA_UAU.7 Protected authentication feedback FIA_UID.2 User identification before any action Security Management (FMT) FMT_MOF.1 Management of security functions behaviour FMT_MSA.1 Management of security attributes FMT_MSA.3 Static attribute initialization FMT_MTD.1 Management of TSF data FMT_PWD.1(Extended ) Management of ID and password FMT_SMF.1 Specification of management functions FMT_SMR.1 Security roles Protection of the TSF (FPT) FPT_ITT.1 Basic internal TSF data transfer protection FPT_PST.1(Extended) Basic protection of stored TSF data FPT_PST.2(Extended) Availability protection of TSF data FPT_TST.1 TSF testing FPT_TEE.1 Testing of external entities TOE Access (FPT) FTA_MCS.2 Per user attribute limitation on multiple concurrent sessions FTA_SSL.5(Extended) Management of TSF-initiated sessions FTA_TSE.1 TOE session establishment [Table 5-1] Security functional requirements 5.1.1 Security audit (FAU) FAU_ARP.1 Security alarms Hierarchical to: No other components. Dependencies: FAU_SAA.1 Potential violation analysis Security Target CopyrightSoftCamp Co., Ltd. Page 32 of 76 FAU_ARP.1.1 The TSF shall take [Countermeasure in [Table 5-2]] upon detection of a potential security violation. Security Functional Component Potential security violation Countermeasure FIA_UAU.2 Authentication failure audit event among auditable event Send a notification email to the authorized administrator FPT_TST.1 Integrity violation and Failure of self test of the KCMVP event among auditable events Send a notification email to the authorized administrator FDP_ACF.1 Control rules violation audit event among auditable event Show pop-up message to the document user [Table 5-2] Actions for potential security violation FAU_GEN.1 Audit data generation Hierarchical to: No other components. Dependencies: FPT_STM.1 Reliable time stamps FAU_GEN.1.1 The TSF shall be able to generate an audit record of the following auditable events: a) Start-up and shutdown of the audit functions; b) All auditable events for the not specified level of audit; and c) [Refer to the “auditable events” in [Table 5-2] Audit events, [None]] FAU_GEN.1.2 The TSF shall record within each audit record at least the following information: a) Date and time of the event, type of event, subject identity (if applicable) and the outcome (success of failure) of the event: and b) For each audit event type, based on the auditable event definitions of the functional components include in the ST, [refer to "Additional Audit Record" in [Table 5-3] Auditable Event, (None)] Security Functional Component Auditable Event Additional Audit Record FAU_ARP.1 Actions taken due to potential security violations FAU_SAA.1 Enabling and disabling of any of the analysis mechanisms, Automated responses performed by the tool FAU_STG.3 Actions taken due to exceeding of a threshold Security Target CopyrightSoftCamp Co., Ltd. Page 33 of 76 FAU_STG.4 Actions taken due to the audit storage failure FCS_CKM.1(2) Success and failure of the activity FCS_CKM.2 Success and failure of the activity (only applying to distribution of key related to user data encryption/decryption) FCS_CKM.4 Success and failure of the activity (only applying to destruction of key related to user data encryption/decryption) FCS_COP.1 Success and failure of cryptographic operation FDP_ACF.1 Successful request of operation execution regarding the object handled by SFP Object identification information FIA_AFL.1 The reaching of the threshold for the unsuccessful authentication attempts and the action taken, and the subsequent, if appropriate, restoration to the normal state FIA_IMA.1 (Extended) Success and failure of mutual authentication Modify of authentication protocol FIA_UAU.2 All uses of authentication mechanisms FIA_UAU.4 Attempts to reuse authentication data FIA_UID.2 All use of the User Identification mechanism, including the user identity provided FMT_MOF.1 All modifications in the behavior of the functions in the TSF FMT_MSA.1 All modifications to the security attributes FMT_MSA.3 Modifications to the basic settings of allowance or restriction rules All modifications to the initial values of security attributes FMT_MTD.1 All modifications to the values of TSF data Modified values of TSF data FMT_PWD.1 (Extended) All changes of the password FMT_SMF.1 Use of the management functions FMT_SMR.1 Modifications to the user group of rules divided FPT_TST.1 Execution of the TSF self tests and the results of the tests Modified TSF data or execution code in case of integrity violation FTA_MCS.2 Denial of a new session based on the limitation of Security Target CopyrightSoftCamp Co., Ltd. Page 34 of 76 multiple concurrent sessions FTA_SSL.5 (Extended) Locking or termination of interactive session FTA_TSE.1 Denial of a session establishment due to the session establishment mechanism All attempts at establishment of a user session [Table 5-3] Audit event FAU_SAA.1 Potential violation analysis Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation FAU_SAA.1.1 The TSF shall be able to apply a set of rules in monitoring the audited events and based upon these rules indicate a potential violation of the enforcement of the SFRs. FAU_SAA.1.2 The TSF shall enforce the following rules for monitoring audited events: a) Accumulation or combination of [Authentication failure audit event among auditable event in FIA_UAU.2, Control rules violation audit event among auditable event in FDP_ACF.1, Integrity violation and Failure of self test of the KCMVP event among auditable events in FPT_TST.1, None] Known to indicate potential security violation. b) [None] FAU_SAR.1 Audit review Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation FAU_SAR.1.1 The TSF shall provide the [authorized administrator] with the capability to read [all the audit data] from the audit records. FAU_SAR.1.2 The TSF shall provi de the audit records in a manner suitable for the authorized administrator to interpret the information. FAU_SAR.3 Selectable audit review Hierarchical to: No other components. Dependencies: FAU_SAR.1 Audit review FAU_SAR.3.1 The TSF shall provide the capability to apply [the following methods of selection and/or ordering] of audit data based on [the following criteria with logical relations]. a) Criteria with logical relations (AND) Log Type, Log name, Search period, Operator name, Operator affiliation, File Security Target CopyrightSoftCamp Co., Ltd. Page 35 of 76 name b) Ascending, descending, per each result field FAU_SEL.1 Selective audit Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation FMT_MTD.1 TSF TSF Management of TSF data FAU_SEL.1.1 The TSF shall be able to select the set of events to be audited from theset of all auditable events based on the following attributes: a) event type b) [success or failure] FAU_STG.3 Action in case of possible audit data loss Hierarchical to: No other components. Dependencies: FAU_STG.1 Protected audit trail storage FAU_STG.3.1 The TSF shall [send a notification email to the authorized administrator, [None]] if the audit trail exceeds [80% of the total capacity of the audit trail storage]. FAU_STG.4 Prevention of audit data loss Hierarchical to: FAU_STG.3 Action in case of possible audit data loss Dependencies: FAU_STG.1 Protected audit trail storage FAU_STG.4.1 The TSF shall [overwrite the oldest stored audit records] and [send a notification email to the authorized administrator] if the audit trail is full. 5.1.2 Cryptographic support (FCS) FCS_CKM.1(1) Cryptographic key generation (Electronic document encryption) Hierarchical to: No other components. Dependencies: FCS_COP.1(1) Cryptographic operation (Electronic document encryption) FCS_CKM.4 Cryptographic key destruction FCS_CKM.1.1 The TSF shall generate cryptographic keys in accordance with a specified cryptographic key generation algorithm [Cryptographic key generation algorithm in [Table 5-4]] and a specified cryptographic key size [Cryptographic key size in [Table 5-4]] that meet the following [List of standards in [Table 5-4]]. Security Target CopyrightSoftCamp Co., Ltd. Page 36 of 76 Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size DEK(Document Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 [Table 5-4] Cryptographic key generation algorithm (Electronic document encryption) FCS_CKM.1(2) Cryptographic key generation (TSF data encryption) Hierarchical to: No other components. Dependencies: FCS_COP.1(2) Cryptographic operation (TSF data encryption) FCS_CKM.4 Cryptographic key destruction FCS_CKM.1.1 The TSF shall generate cryptographic keys in accordance with a specified cryptographic key generation algorithm [Cryptographic key generation algorithm in [Table 5-5]] and a specified cryptographic key size [Cryptographic key size in [Table 5-5]] that meet the following [List of standards in [Table 5-5]]. Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size DEK(Document Header Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 DEK(Client Configuration Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 KEK(Client Configuration Key Encryption Key) PKCS#5 PBKDF2 (Password-Based Key Derivation Function 2) 128 DEK(Server Configuration Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 KEK(Server Configuration Key Encryption Key) PKCS#5 PBKDF2 (Password-Based Key Derivation Function 2) 128 KEK(Database Encryption Key) PKCS#5 PBKDF2 (Password-Based Key Derivation Function 2) 128 [Table 5-5] Cryptographic key generation algorithm (TSF data encryption) Security Target CopyrightSoftCamp Co., Ltd. Page 37 of 76 FCS_CKM.1(3) Cryptographic key generation (Encryption by policy) Hierarchical to: No other components. Dependencies: FCS_COP.1(3) Cryptographic operation (Encryption by policy) FCS_CKM.4 Cryptographic key destruction FCS_CKM.1.1 The TSF shall generate cryptographic keys in accordance with a specified cryptographic key generation algorithm [Cryptographic key generation algorithm in [Table 5-6]] and a specified cryptographic key size [Cryptographic key size in [Table 5-6]] that meet the following [List of standards in [Table 5-6]]. Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size KEK(Server Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 KEK(User Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 KEK(Group Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 KEK(Category Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 [Table 5-6] Cryptographic key generation algorithm (Encryption by policy) FCS_CKM.1(4) Cryptographic key generation (Communication encryption) Hierarchical to: No other components. Dependencies: FCS_COP.1(4) Cryptographic operation (Communication encryption) FCS_CKM.4 Cryptographic key destruction FCS_CKM.1.1 The TSF shall generate cryptographic keys in accordance with a specified cryptographic key generation algorithm [Cryptographic key generation algorithm in [Table 5-7]] and a specified cryptographic key size [Cryptographic key size in [Table 5-7]] that meet the following [List of standards in [Table 5-7]]. Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size DEK(Communication Data Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 KEK(Communication Data Key Encryption Key) ISO/IEC 18033-2 RSAES (SHA256) 2048 [Table 5-7] Cryptographic key generation algorithm (Communication encryption) Security Target CopyrightSoftCamp Co., Ltd. Page 38 of 76 FCS_CKM.2 Cryptographic key distribution Hierarchical to: No other components. Dependencies: FCS_CKM.1 Cryptographic key generation FCS_CKM.4 Cryptographic key destruction FCS_CKM.2.1 The TSF shall distribute cryptographic keys in accordance with the specified cryptographic distribution method [RSAES] that meets the following [ISO/IEC 18033- 2]. FCS_CKM.4 Cryptographic key destruction Hierarchical to: No other components. Dependencies: FCS_CKM.1 Cryptographic key generation FCS_CKM.4.1 The TSF shall destroy the encryption key in accordance with the stated cryptographic method [Cryptographic key destruction method in [Table 5-8]] that conforms to the following [None]: Cryptographic key(Usage) Timing of destruction Cryptographic key destruction method DEK(Electronic Document Encryption) When decrypting an encrypted document The header information of security document is destructed and overwritten by a general document. When there is a request for the destruction of an encrypted document Document is overwritten in order of ‘0’, ‘0xFF’, and ‘random value’. KEK(Key Encryption Key) When encrypting or decrypting a document It becomes zero in order of ‘1’ and ‘0’ on memory. When there is a request from authorized administrator It is deleted from encryption key storage. DEK(Communicatio n Encryption) When a session is terminated It becomes zero in order of ‘1’ and ‘0’ on memory. DEK(TSF Data Encryption ) When TSF data is encrypted or decrypted It becomes zero in order of ‘1’ and ‘0’ on memory. [Table 5-8] Cryptographic key destruction FCS_COP.1(1) Cryptographic operation (Electronic document encryption) Hierarchical to: No other components. Dependencies: FCS_CKM.1(1) Cryptographic key generation (Electronic document Security Target CopyrightSoftCamp Co., Ltd. Page 39 of 76 encryption) FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1 The TSF shall perform the cryptographic operation list [Cryptographic operation list in [Table 5-9]] in accordance with a specified cryptographic algorithm in [Cryptographic algorithm in [Table 5-9]] and a specified cryptographic key size [Cryptographic key size in [Table 5-9]] that meet the following [List of standards in [Table 5-9]] Cryptographic operation list List of standards Cryptographic algorithm Cryptographic key size Block cipher KS X 1213 ARIA 128 [Table 5-9] Cryptographic operation (Electronic document encryption) FCS_COP.1(2) Cryptographic operation (TSF data encryption) Hierarchical to: No other components. Dependencies: FCS_CKM.1(2) Cryptographic key generation (TSF data encryption) FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1 The TSF shall perform the cryptographic operation list [Cryptographic operation list in [Table 5-10]] in accordance with a specified cryptographic algorithm in [Cryptographic algorithm in [Table 5-10]] and a specified cryptographic key size [Cryptographic key size in [Table 5-10]] that meet the following [List of standards in [Table 5-10]] Cryptographic operation list List of standards Cryptographic algorithm Cryptographic key size Block cipher KS X 1213 ARIA 128 Hash function KS X ISO/IEC 10118-3:2001 SHA-256/512 N/A [Table 5-10] Cryptographic operation (TSF data encryption) FCS_COP.1(3) Cryptographic operation (Encryption by policy) Hierarchical to: No other components. Dependencies: FCS_CKM.1(3) Cryptographic key generation (Encryption by policy) FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1 The TSF shall perform the cryptographic operation list [Cryptographic operation list in [Table 5-11]] in accordance with a specified cryptographic algorithm in [Cryptographic algorithm in [Table 5-11]] and a specified cryptographic key size Security Target CopyrightSoftCamp Co., Ltd. Page 40 of 76 [Cryptographic key size in [Table 5-11]] that meet the following [List of standards in [Table 5-11]] Cryptographic operation list List of standards Cryptographic algorithm Cryptographic key size Block cipher KS X 1213 ARIA 128 [Table 5-11] Cryptographic operation (Encryption by policy) FCS_COP.1(4) Cryptographic operation (Communication encryption) Hierarchical to: No other components. Dependencies: FCS_CKM.1(4) Cryptographic key generation (Communication encryption) FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1 The TSF shall perform the cryptographic operation list [Cryptographic operation list in [Table 5-12]] in accordance with a specified cryptographic algorithm in [Cryptographic algorithm in [Table 5-12]] and a specified cryptographic key size [Cryptographic key size in [Table 5-12]] that meet the following [List of standards in [Table 5-12]] Cryptographic operation list List of standards Cryptographic algorithm Cryptographic key size Block cipher KS X 1213 ARIA 128 public key cipher ISO/IEC 18033-2 RSAES (SHA256) 2048 [Table 5-12] Cryptographic operation (Communication encryption) FCS_RGB.1 Random bit generation (Extended) Hierarchical to: No other components. Dependencies: No dependencies FCS_RGB.1.1 The TSF shall generate random bits required to generate a cryptographic key using the specified random bit generator that meets the following [ISO/IEC 18031]. 5.1.3 User data protection (FDP) FDP_ACC.1(1) Subset access control (Electronic Document Encryption access control) Hierarchical to: No other components. Dependencies: FDP_ACF.1(1) Security attribute-based access control (Electronic Security Target CopyrightSoftCamp Co., Ltd. Page 41 of 76 Document Encryption access control) FDP_ACC.1.1 TSF shall enforce the [electronic document encryption access control] on [list of subjects(document user), objects(protected document), and operations(read, readable count, edit, decrypt, right modification, access period, auto destruction)]. FDP_ACC.1(2) Subset access control (Electronic Document Usage access control) Hierarchical to: No other components. Dependencies: FDP_ACF.1(2) Security attribute-based access control (Electronic Document Usage access control) FDP_ACC.1.1 TSF shall enforce the [Electronic Document Usage access control] on [list of subjects(document user), objects(documents to be protected), and operations(print, printable count, print marking, copy & paste between documents, screen capture)] FDP_ACF.1(1) Security attribute-based access control (Electronic Document Encryption access control) Hierarchical to: No other components. Dependencies: FDP_ACC.1(1) Subset access control (lectronic Document Encryption access control) FMT_MSA.3 Static attribute initialization FDP_ACF.1.1 The TSF shall enforce [electronic document encryption access control] on objects based on [List of subjects a) and objects b) controlled by the following SFP, Security attribute c), d) appropriate for SFP regarding each subject and object]. [ a) Subject : document user b) Object: documents to be protected c) Security attribute of subject: user ID, group ID, classification ID d) Security attribute of object: user ID, group ID, category ID, authority information ] FDP_ACF.1.2 TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: [ a) If the security attribute for the subject is included to the security attribute which is permitted to access for the object and the operation is matched with the security attribute of the object, the corresponding operation is allowed. b) none] Security Target CopyrightSoftCamp Co., Ltd. Page 42 of 76 FDP_ACF.1.3 TSF shall explicitly authorize access of the subject to objects based on the following additionalrules: [none] FDP_ACF.1.4 TSF shall explicitly deny access of the subject to objects based on the following additional rules: [none] FDP_ACF.1(2) Security attribute based access control (Electronic Document usage access control) Hierarchical to: No other components. Dependencies: FDP_ACC.1(2) Subset access control (Electronic Document usage access control) FMT_MSA.3 Static attribute initialization FDP_ACF.1.1 The TSF shall enforce [electronic Document usage access control] on objects based on [List of subjects a) and objects b) controlled by the following SFP, Security attribute c), d) appropriate for SFP regarding each subject and object]. [ a) Subject : document user b) Object: documents to be protected c) Security attribute of subject: user ID, group ID, classification ID d) Security attribute of object: user ID, group ID, category ID, authority information ] FDP_ACF.1.2 TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: [ a) If the security attribute for the subject is included to the security attribute which is permitted to access for the object and the operation is matched with the security attribute of the object, the corresponding operation is allowed. b) none] FDP_ACF.1.3 TSF shall explicitly authorize access of the subject to objects based on the following additionalrules: [none] FDP_ACF.1.4 TSF shall explicitly deny access of the subject to objects based on the following additional rules: [none] Security Target CopyrightSoftCamp Co., Ltd. Page 43 of 76 5.1.4 Identification and authentication (FIA) FIA_AFL.1 Authentication failure handling Hierarchical to: No other components. Dependencies: FIA_UAU.1 Timing of authentication FIA_AFL.1.1 The TSF shall detect when [5] unsuccessful authentication attempts occur related to [Authentication attempts of server manager, chief console manager, middle console manager, document user]. FIA_AFL.1.2 When the defined number of unsuccessful authentication attempts has been met, the TSF shall [Disable identification and authentication feature for 5 minutes]. FIA_IMA.1 TOE Internal mutual authentication Hierarchical to: No other components. Dependencies: No dependencies FIA_IMA.1.1 The TSF shall perform mutual authentication between [Server and Client, Server and Console] in accordance with a specified [Internally implemented authentication protocol] that meets the following: [None]. FIA_SOS.1 Verification of secrets Hierarchical to: No other components. Dependencies: No dependencies FIA_SOS.1 The TSF shall provide a mechanism to verify that secrets meet [the following defined permission criteria]. [ a) Allowed characters - Alphabet Uppercase, Lowercase (A ~ Z, a ~ z 52 kinds) - Number (0 ~ 9, 10 kinds) - Special character (32 kinds): `~!@#$%^&*()-_=+\|[]{};:'",.<>/? b) Combination rule - Uppercase, lowercase, number, and special characters must each contain at least one. - The same character cannot be used more than 3 times consecutively - Alphabets and numbers cannot be used in ascending or descending order three or more times in a row c) Minimum length: 9 characters (9byte) Security Target CopyrightSoftCamp Co., Ltd. Page 44 of 76 d) Maximum length: 15 characters (15byte) ] FIA_UAU.2 User authentication before any action Hierarchical to: FIA_UAU.1 Timing of authentication Dependencies: FIA_UID.1 Timing of identification FIA_UAU.2.1 The TSF shall require each user to be successfully authenticated before allowing any other TSF mediated actions on behalf of that user. FIA_UAU.4 Single-use authentication mechanisms Hierarchical to: No other components. Dependencies: No dependencies FIA_UAU.4.1 The TSF shall prevent reuse of authentication data related to [password-based authentication mechanism]. FIA_UAU.7 Protected authentication feedback Hierarchical to: No other components. Dependencies: FIA_UAU.1 Timing of authentication FIA_UAU.7.1 The TSF shall provide only [Information masked by the "●" character of the password entered] to the user while the authentication is in progress. FIA_UID.2 User identification before any action Hierarchical to: FIA_UID.1 Timing of identification Dependencies: No dependencies FIA_UID.2.1 The TSF shall require each User to be successfully identified before allowing any other TSF-mediated actions on behalf of that User 5.1.5 Security management (FMT) Security functional component Management function Management type FAU_ARP.1 Management of actions (addition, removal, modification) to be taken Management of security functions FAU_SAA.1 Maintenance of the rules (addition, removal and Management of Security Target CopyrightSoftCamp Co., Ltd. Page 45 of 76 modification of the rules in the rule group) security functions FAU_SAR.1 Maintenance (deletion, modification, addition) of the group of users with read access right to the audit records Management of security roles FAU_STG.3 Maintenance of the threshold Management of TSF data threshold Maintenance (deletion, modification, addition) of actions to be taken in case of imminent audit storage failure Management of security functions FAU_STG.4 Maintenance (deletion, modification, addition) of actions to be taken in case of audit storage failure. Management of security functions FDP_ACF.1 Managing the attributes used to make explicit access based decisions or denial decisions. Management of security attributes FIA_AFL.1 Management of the threshold for unsuccessful authentication attempts Management of TSF data threshold Management of actions to be taken in the event of an authentication failure Management of security functions FIA_SOS.1 Management of the metric used to verify the secrets Management of security functions FIA_UAU.2 Management of the authentication data by an administrator Management of the authentication data by the user associated with this data. Management of TSF data FIA_UID.2 Management of the user identities Management of TSF data FMT_MOF.1 Management of the group of roles that can interact with the functions in the TSF Management of security roles FMT_MSA.1 Management of the group of roles that can interact with the security attributes Management of security roles Management of rules by which security attributes inherit specified values. Management of security roles FMT_MSA.3 Management of the group of roles that can specify initial values Management of security roles Management of the configuration that permit or limit the default values in accordance with given access control SFP Management of rules by which security attributes inherit specified values. Management of security attributes FMT_MTD.1 Management of the group of roles that can interact with the TSF data Management of security roles FMT_PWD.1 Management of ID and password configuration rules Management of security functions Security Target CopyrightSoftCamp Co., Ltd. Page 46 of 76 FMT_SMR.1 Management of the group of users that are part of a role. Management of security roles FPT_ITT.1 Management of the types of modification against which the TSF shall protect Management of the mechanism used to provide the protection of the data in transit between different parts of the TSF Management of security functions FPT_TST.1 Management of the conditions under which TSF self testing occurs, such as ‘during initial start-up’, ‘regular interval’, or ‘under specified conditions’ Management of the time interval (if appropriate) Management of TSF data FTA_MCS.2 Management of the maximum allowed number of concurrent user sessions by an administrator Management of TSF data threshold FTA_SSL.5 Specification of the time of user inactivity after which lock- out occurs for an individual user Specification of the default time of user inactivity after which lock-out occurs Management of TSF data FTA_TSE.1 Management of the session establishment conditions by the authorized administrator Management of TSF data [Table 5-13] Security management action and management type by component FMT_MOF.1 Management of security functions behaviour Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of management functions FMT_SMR.1 Security roles FMT_MOF.1.1 The TSF shall restrict the ability to conduct management actions on the following functions [ a) Chief console manager: - Integrity verification request - Basic encryption policy management and force encryption policy management - Client log-in policy management, APP control management, print marking management b) Middle console manager: - Basic encryption policy management and force encryption policy management, - Client log-in policy management, APP control management, print marking management Security Target CopyrightSoftCamp Co., Ltd. Page 47 of 76 c) Document user - Integrity verification request ] to [each user’s role]. ※ “Management actions” for which refinement is applied include all the abilities to determine, disable, enable and modify the behavior of some of the TSF functions. FMT_MSA.1 Management of security attributes Hierarchical to: No other components. Dependencies: FDP_ACC.1 Subset access control FMT_SMF.1 Specification of ManagementFunctions FMT_SMR.1 Security roles FMT_MSA.1.1 The TSF shall enforce [electronic document encryption access control, electronic document usage access control] to restrict the ability to change the default value of, query, modify and delete the security attributes of [document user ID, group ID, category ID, authority information] to [authorized administrator]. FMT_MSA.3 Static attribute initialization Hierarchical to: No other components. Dependencies: FMT_MSA.1 Management of security attributes FMT_SMR.1 Security roles FMT_MSA.3.1 The TSF shall enforce [electronic document encryption access control policy, electronic document usage access control policy] to provide restrictive default values for security attributes that are used to enforce the SFP. FMT_MSA.3.2 The TSF shall allow the [authorized administrator] to specify alternative initial values to override the default values when an object or information is created. FMT_MTD.1 TSF Data management Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of Management Functions FMT_SMR.1 Security roles FMT_MTD.1.1 The TSF shall restrict the ability to manage the [following TSF data list] to [each user’s role]. [ a) Chief console manager - Management of the threshold for the unsuccessful authentication attempts of Security Target CopyrightSoftCamp Co., Ltd. Page 48 of 76 Middle console manager - Management of the identification and authentication information of Middle console manager - Management of the identification and authentication data of document user - Management of session termination time of Middle console manager - Management of accessible IP for Chief console manager and Middle console manager - Management of user, group, category, classification, security policy and log b) Middle console manager - Management of the identification and authentication data of document user - Management of user, group and log c) Server manager - Creation of a pair of public and private keys - Mail information setting to send alarm mails d) Document user - Management of the authentication data of document user ] ※ By the definition, “Manage” to which a refinement operation is applied includes the ability to change default value, query, modify, delete, clear, and conduct other operations. FMT_PWD.1 Management of ID and password (Extended) Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of Management Functions FMT_SMR.1 Security roles FMT_PWD.1.1 The TSF shall restrict the ability to manage the password of [none] to [the authorized administrator]. 1. [None] 2. [None] FMT_PWD.1.2 The TSF shall restrict the ability to manage the ID of [none] to [the authorized administrator]. 1. [None] 2. [None] FMT_PWD.1.3 The TSF shall provide the capability for changing the ID and password when the authorized administrator accesses for the first time. Security Target CopyrightSoftCamp Co., Ltd. Page 49 of 76 FMT_SMF.1 Specification of management functions Hierarchical to: No other components. Dependencies: No dependencies FMT_SMF.1.1 The TSF shall be capable of performing the following management functions: [Security function management, TSF data management, security attributes management and environment configuration parameter defined in FMT_MOF.1, FMT_MTD.1, FMT_MSA.1 and FMT_PWD.1] FMT_SMR.1 Security roles Hierarchical to: No other components. Dependencies: FIA_UID.1 Timing of identification FMT_SMR.1.1 The TSF shall maintain the role of [Server manager, Chief console manager, Middle console manager, Document user]. FMT_SMR.1.2 TSF shall be able to associate users and their roles defined in FMT_SMR.1.1 5.1.6 Protection of the TSF (FPT) FPT_ITT.1 Basic internal TSF data transfer protection Hierarchical to: No other components. Dependencies: No dependencies FPT_ITT.1.1 The TSF shall protect TSF data from disclosure, modification when it is transmitted between separate parts of the TOE. FPT_PST.1 Basic protection of stored TSF data (Extended) Hierarchical to: No other components. Dependencies: No dependencies FPT_PST.1.1 The TSF shall protect [password of administrator, cryptographic key, critical security parameters, TOE setting value (security policy, configuration parameters)] stored in containers controlled by the TSF from unauthorized disclosure, modification. FPT_PST.2 Availability protection of stored TSF data (Extended) Hierarchical to: No other components. Dependencies: No dependencies Security Target CopyrightSoftCamp Co., Ltd. Page 50 of 76 FPT_PST.2.1 TSF shall prevent the unauthorized deletion for [client setting value (security policy, configuration parameters)]. FPT_PST.2.2 TSF shall prevent the unauthorized termination for [execution file of client(process)]. FPT_TST.1 TSF self-testing Hierarchical to: No other components. Dependencies: No dependencies FPT_TST.1.1 The TSF shall run a suite of self-tests during initial start-up, periodically during normal operation to demonstrate the correct operation of TSF. FPT_TST.1.2 The TSF shall provide a function that verifies integrity of TSF data to the authorized administrator. FPT_TST.1.3 The TSF shall provide a function that verifies integrity of TSF to the authorized administrator. FPT_TEE.1 Testing of external entities Hierarchical to: No other components. Dependencies: No dependencies FPT_TEE.1.1 The TSF shall run a suite of tests during initial start-up, periodically during normal operation to check the fulfillment of [SMTP server, DBMS]. FPT_TST.1.2 If the test fails, the TSF shall [The following response actions] a) Failure of DBMS external entities: Send a notification email to the authorized administrator b) Failure of SMTP server external entities: Audit data generation 5.1.7 TOE access (FTA) FTA_MCS.2 Per user attribute limitation on multiple concurrent sessions Hierarchical to: FTA_MCS.1 Basic limitation on multiple concurrent sessions Dependencies: FIA_UID.1 Timing of identification FTA_MCS.2.1 The TSF shall restrict the maximum number of concurrent sessions that belong to the same user according to the rules [The maximum number of concurrent sessions for administrator management access session restricted to one, prohibition of same user both concurrent connections of management access session and local access session] Security Target CopyrightSoftCamp Co., Ltd. Page 51 of 76 FTA_MCS.2.2 The TSF shall enforce, by default, a limit of [1] sessions per user. FTA_SSL.5 Management of TSF-initiated sessions (Extended) Hierarchical to: No other components. Dependencies: FIA_UAU.1 authentication FTA_SSL.5.1 The TSF shall terminate an interactive session of the authorized administrator after a [5 minutes of Administrator inactivity]. FTA_TSE.1 TOE session establishment Hierarchical to: No other components. Dependencies: No dependencies FTA_TSE.1.1 The TSF shall be able to deny administrator’s management access session establishment based on [connection IP, whether or not to activate the management access session of administrator account with the same privilege]. Security Target CopyrightSoftCamp Co., Ltd. Page 52 of 76 5.2 Security assurance requirements Security assurance requirements of this ST are composed of assurance components in Common Criteria (CC V3.1) Part 3 and the evaluation assurance level is EAL1+. The table below summarizes assurance components. Security Assurance Class Security Assurance Component Security Target evaluation ASE_INT.1 ST introduction ASE_CCL.1 Conformance claims ASE_OBJ.1 Security objectives for the operational environment ASE_ECD.1 Extended components defination ASE_REQ.1 Stated security requirements ASE_TSS.1 TOE summary specification Development ADV_FSP.1 Basic functional specification Guidance documents AGD_OPE.1 Operational user guidance AGD_PRE.1 Preparative procedures Life-cycle support ALC_CMC.1 Labeling of the TOE ALC_CMS.1.2 TOE configuration management coverage Tests ATE_FUN.1 Functional testing ATE_IND.1 Independent testing: conformance Vulnerability Assessment AVA_VAN.1 Vulnerability survey [Table 5-14] Security assurance requirements 5.2.1 Security Target evaluation ASE_INT.1 ST introduction Dependencies: No dependencies Developer action elements ASE_INT.1.1D The developer shall provide an ST introduction. Content and presentation elements ASE_INT.1.1C The ST introduction shall contain an ST reference, a TOE reference, a TOE overview and a TOE description. ASE_INT.1.2C The ST reference shall uniquely identify the ST. Security Target CopyrightSoftCamp Co., Ltd. Page 53 of 76 ASE_INT.1.3C The TOE reference shall uniquely identify the TOE. ASE_INT.1.4C The TOE overview shall summaries the usage and major security features of the TOE. ASE_INT.1.5C The TOE overview shall identify the TOE type. ASE_INT.1.6C The TOE overview shall identify any non-TOE hardware/software/firmware required by the TOE. ASE_INT.1.7C The TOE description shall describe the physical scope of the TOE. ASE_INT.1.8C The TOE description shall describe the logical scope of the TOE. Evaluator action elements ASE_INT.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ASE_INT.1.2E The evaluator shall confirm that the TOE reference, the TOE overview, and the TOE description are consistent with each other. ASE_CCL.1 Conformance claims Dependencies: ASE_INT.1 ST introduction ASE_ECD.1 Extended components definition ASE_REQ.1 Stated security requirements Developer action elements ASE_CCL.1.1D The developer shall provide a conformance claim. ASE_CCL.1.2D The developer shall provide a conformance claim rationale. Content and presentation ASE_CCL.1.1C The conformance claim shall contain a CC conformance claim that identifies the version of the CC to which the ST and the TOE claim conformance. ASE_CCL.1.2C The CC conformance claim shall describe the conformance of the ST to CC part 2 as either CC Part 2 conformant or CC Part 2 extended. ASE_CCL.1.3C The CC conformance claim shall describe the conformance of the ST to CC Part 3 as either CC Part 3 conformant or CC Part 3 extended. ASE_CCL.1.4C The CC conformance claim shall be consistent with the extended components definition. ASE_CCL.1.5C The conformance claim shall identify all PPs and security requirement packages to which the ST claims conformance. ASE_CCL.1.6C The conformance claim shall describe any conformance of the ST to a package as either package-conformant or package-augmented. Security Target CopyrightSoftCamp Co., Ltd. Page 54 of 76 ASE_CCL.1.7C The conformance claim rationale shall demonstrate that the TOE type is consistent with the TOE type in the PPs for which conformance is being claimed. ASE_CCL.1.8C The conformance claim rationale shall demonstrate that the statement of the security problem definition is consistent with the statement of the security problem definition in the PPs for which conformance is being claimed. ASE_CCL.1.9C The conformance claim rationale shall demonstrate that the statement of security objectives is consistent with the statement of security objectives in the PPs for which conformance is being claimed. ASE_CCL.1.10C The conformance claim rationale shall demonstrate that the statement of security requirements is consistent with the statement of security requirements in the PPs for which conformance is being claimed. Evaluator action elements ASE_CCL.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ASE_OBJ.1 Security objectives for the operational environment Dependencies: No dependencies Developer action elements ASE_OBJ.1.1D The developer shall provide a statement of security objectives. Content and presentation elements ASE_OBJ.1.1C The statement of security objectives shall describe the security objectives for the operational environment. Evaluator action elements ASE_OBJ.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ASE_ECD.1 Extended components definition Dependencies: No dependencies Developer action elements ASE_ECD.1.1D The developer shall provide a statement of security requirements. ASE_ECD.1.2D The developer shall provide an extended components definition. Security Target CopyrightSoftCamp Co., Ltd. Page 55 of 76 Content and presentation elements ASE_ECD.1.1C The statement of security requirements shall identify all extended security requirements. ASE_ECD.1.2C The extended components definition shall define an extended component for each extended security requirement. ASE_ECD.1.3C The extended components definition shall describe how each extended component is related to the existing CC components, families, and classes. ASE_ECD.1.4C The extended components definition shall use the existing CC components, families, classes, and methodology as a model for presentation. ASE_ECD.1.5C The extended components shall consist of measurable and objective elements such that conformance or nonconformance to these elements can be demonstrated. Evaluator action elements ASE_ECD.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ASE_ECD.1.2E The evaluator shall confirm that no extended component can be clearly expressed using existing components. ASE_REQ.1 Stated security requirements Dependencies: ASE_ECD.1 Extended components definition Developer action elements ASE_REQ.1.1D The developer shall provide a statement of security requirements. ASE_REQ.2.2D The developer shall provide a security requirements rationale. Content and presentation elements ASE_REQ.1.1C The statement of security requirements shall describe the SFRs and the SARs. ASE_REQ.1.2C All subjects, objects, operations, security attributes, external entities and other terms that are used in the SFRs and the SARs shall be defined. ASE_REQ.1.3C The statement of security requirements shall identify all operations on the security requirements. ASE_REQ.1.4C All operations shall be performed correctly. ASE_REQ.1.5C Each dependency of the security requirements shall either be satisfied, or the security requirements rationale shall justify the dependency not being satisfied. ASE_REQ.1.6C The statement of security requirements shall be internally consistent. Evaluator action elements Security Target CopyrightSoftCamp Co., Ltd. Page 56 of 76 ASE_REQ.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ASE_TSS.1 TOE summary specification Dependencies: ASE_INT.1 ST introduction ASE_REQ.1 Stated security requirements ADV_FSP.1 Basic functional specification Developer action elements ASE_TSS.1.1D The developer shall provide a TOE summary specification. Content and presentation elements ASE_TSS.1.1C The TOE summary specification shall describe how the TOE meets each SFR. Evaluator action elements ASE_TSS.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ASE_TSS.1.2E The evaluator shall confirm that the TOE summary specification is consistent with the TOE overview and the TOE description. 5.2.2 Development ADV_FSP.1 Basic functional specification Dependencies: No dependencies Developer action elements ADV_FSP.1.1D The developer shall provide a functional specification. ADV_FSP.1.2D The developer shall provide a tracing from the functional specification to the SFRs Content and presentation elements ADV_FSP.1.1C The functional specification shall describe the purpose and method of use for each SFRenforcing and SFR-supporting TSFI. ADV_FSP.1.2C The functional specification shall identify all parameters associated with each SFRenforcing and SFR-supporting TSFI. ADV_FSP.1.3C The functional specification shall provide rationale for the implicit categorization of interface as SFR-non-interfering. ADV_FSP.1.4C The tracing shall demonstrate that the SFRs trace to TSFIs in the functional Security Target CopyrightSoftCamp Co., Ltd. Page 57 of 76 specification. Evaluator action elements ADV_FSP.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ADV_FSP.1.2E The evaluator shall determine that the functional specification is an accurate and complete instantiation of the SFRs. 5.2.3 Guidance documents AGD_OPE.1 Operational user guidance Dependencies: ADV_FSP.1 Basic functional specification Developer action elements AGD_OPE.1.1D The developer shall provide operational user guidance. Content and presentation elements AGD_OPE.1.1C The operational user guidance shall describe, for each user role, the user-accessible functions and privilege that should be controlled in a secure processing environment, including appropriate warnings. AGD_OPE.1.2C The operational user guidance shall describe, for each user role, how to use the available interfaces provided by the TOE in a secure manner. AGD_OPE.1.3C The operational user guidance shall describe, for each user role, the available functions and interfaces, in particular all security parameters under the control of the user, indicating secure values as appropriate. AGD_OPE.1.4C The operational user guidance shall, for each user role, clearly present each type of security-relevant event relative to the user-accessible functions that need to be performed, including changing the security characteristics of entities under the control of the TSF. AGD_OPE.1.5C The operational user guidance shall identify all possible modes of operation of the TOE (including operation following failure or operational error ), their consequences and implications for maintaining secure operation. AGD_OPE.1.6C The operational user guidance shall, for each user role, describe the security measures to be followed in order to fulfill the security objectives for the operational environment as described in the ST. AGD_OPE.1.7C The operational user guidance shall be clear and reasonable. Security Target CopyrightSoftCamp Co., Ltd. Page 58 of 76 Evaluator action elements AGD_OPE.1.1E The operational user guidance shall be clear and reasonable. AGD_PRE.1 Preparative procedures Dependencies: No dependencies Developer action elements AGD_PRE.1.1D The developer shall provide the TOE including its preparative procedures. Content and presentation elements AGD_PRE.1.1C The preparative procedures shall describe all the steps necessary for secure acceptance of the delivered TOE in accordance with the developer's delivery procedures. AGD_PRE.1.2C The preparative procedures shall describe all the steps necessary for secure installation of the TOE and for the secure preparation of the operational environment in accordance with the security objectives for the operational environment as described in the ST. Evaluator action elements AGD_PRE.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. AGD_PRE.1.2E The evaluator shall apply the preparative procedures to confirm that the TOE can be prepared securely for operation. 5.2.4 Life-cycle support ALC_CMC.1 Labeling of the TOE Dependencies: ALC_CMS.1 TOE CM coverage Developer action elements ALC_CMC.1.1D The developer shall provide the TOE and a reference for the TOE. Content and presentation elements ALC_CMC.1.1C TOE shall be labelled with its unique reference. Security Target CopyrightSoftCamp Co., Ltd. Page 59 of 76 Evaluator action elements ALC_CMC.1.1E The evaluator shall confirm that the information provided meet requirements for content and presentation of evidence. ALC_CMS.1 TOE CM coverage Dependencies: No dependencies Developer action elements ALC_CMS.1.1D The developer shall provide a configuration list for the TOE Content and presentation elements ALC_CMS.1.1C The configuration list shall include the followings: the TOE itself and the evaluation evidence required by the SARs. ALC_CMS.1.2C The configuration list shall uniquely identify the configuration items. Evaluator action elements ALC_CMS.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. 5.2.5 Tests ATE_FUN.1 Functional testing Dependencies: ATE_COV.1 Evidence of coverage Developer action elements ATE_FUN.1.1D The developer shall test the TSF and document the results. ATE_FUN.1.2D The developer shall provide test documentation. Content and presentation elements ATE_FUN.1.1C The test documentation shall consist of test plans, expected test results and actual test results. ATE_FUN.1.2C The test plans shall identify the test to be performed and describe the scenarios for performing each test. These scenarios shall include any ordering dependencies on the results of other tests. ATE_FUN.1.3C The expected test results shall show the anticipated outputs from a successful execution of the tests. Security Target CopyrightSoftCamp Co., Ltd. Page 60 of 76 ATE_FUN.1.4C The actual test results shall be consistent with the expected test results. Evaluator action elements ATE_FUN.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ATE_IND.1 Independent testing: conformance Dependencies: ADV_FSP.1 Basic functional specification AGD_OPE.1 Operational user guidance AGD_PRE.1 Preparative procedures Developer action elements ATE_IND.1.1D The developer shall provide the TOE for testing. Content and presentation elements ATE_IND.1.1C The TOE shall be suitable for testing. Evaluator action elements ATE_IND.1.1E The evaluator shall confirm that the information provided meets all requirements for content and presentation of evidence. ATE_IND.1.2E The evaluator shall test a subset of the TSF to confirm that the TSF operates as specified. 5.2.6 Vulnerability assessment AVA_VAN.1 Vulnerability survey Dependencies: ADV_FSP.1 Basic functional specification AGD_OPE.1 Operational user guidance AGD_PRE.1 Preparative procedures Developer action elements AVA_VAN.1.1D The developer shall provide the TOE for testing. Content and presentation elements AVA_VAN.1.1C The TOE shall be suitable for testing. Security Target CopyrightSoftCamp Co., Ltd. Page 61 of 76 Evaluator action elements AVA_VAN.1.1E The evaluator shall confirm that the information provided meets all requirements for content and preparation of evidence AVA_VAN.1.2E The evaluator shall perform a search of public domain sources to identify potential vulnerabilities in the TOE. AVA_VAN.1.3E The evaluator shall conduct penetration testing, based on the identified potential vulnerabilities, to determine that the TOE is resistant to attacks performed by an attacker processing Basic attack potential. 5.3 Security requirements rationale 5.3.1 Dependency rationale of security functional requirements The following Table shows the dependencies of security functional requirement. No Security functional requirements Dependency Reference No. 1 FAU_ARP.1 FAU_SAA.1 3 2 FAU_GEN.1 FPT.STM.1 Rationale (1) 3 FAU_SAA.1 FAU_GEN.1 2 4 FAU_SAR.1 FAU_GEN.1 2 5 FAU_SAR.3 FAU_SAR.1 4 6 FAU_STG.3 FAU_STG.1 Rationale (2) 7 FAU_STG.4 FAU_STG.1 Rationale (2) 8 FAU_SEL.1 FAU_GEN.1 2 FMT_MTD.1 34 9 FCS_CKM.1(1) FCS_COP.1(1) 15 FCS_CKM.4 14 10 FCS_CKM.1(2) FCS_COP.1(2) 16 FCS_CKM.4 14 11 FCS_CKM.1(3) FCS_COP.1(3) 17 FCS_CKM.4 14 12 FCS_CKM.1(4) FCS_COP.1(4) 18 FCS_CKM.4 14 13 FCS_CKM.2 FCS_CKM.1 9,10,11,12 FCS_CKM.4 14 14 FCS_CKM.4 FCS_CKM.1 9,10,11,12 15 FCS_COP.1(1) FCS_CKM.1(1) 9 Security Target CopyrightSoftCamp Co., Ltd. Page 62 of 76 FCS_CKM.4 14 16 FCS_COP.1(2) FCS_CKM.1(2) 10 FCS_CKM.4 14 17 FCS_COP.1(3) FCS_CKM.1(3) 11 FCS_CKM.4 14 18 FCS_COP.1(4) FCS_CKM.1(4) 12 FCS_CKM.4 14 19 FCS_RBG.1 - - 20 FDP_ACC.1(1) FDP_ACF.1(1) 22 21 FDP_ACC.1(2) FDP_ACF.1(2) 23 22 FDP_ACF.1(1) FDP_ACC.1(1) 20 FMT_MSA.3 33 23 FDP_ACF.1(2) FDP_ACC.1(2) 21 FMT_MSA.3 33 24 FIA_AFL.1 FIA_UAU.1 Rationale (3) 25 FIA_IMA.1 - - 26 FIA_SOS.1 - - 27 FIA_UAU.2 FIA_UID.1 Rationale (4) 28 FIA_UAU.4 - - 29 FIA_UAU.7 FIA_UAU.1 Rationale (3) 30 FIA_UID.2 - - 31 FMT_MOF.1 FMT_SMF.1 36 FMT_SMR.1 37 32 FMT_MSA.1 FDP_ACC.1 20,21 FMT_SMF.1 36 FMT_SMR.1 37 33 FMT_MSA.3 FMT_MSA.1 32 FMT_SMR.1 37 34 FMT_MTD.1 FMT_SMF.1 36 FMT_SMR.1 37 35 FMT_PWD.1 FMT_SMF.1 36 FMT_SMR.1 37 36 FMT_SMF.1 - - 37 FMT_SMR.1 FIA_UID.1 Rationale (4) 38 FPT_ITT.1 - - 39 FPT_PST.1 - - 40 FPT_PST.2 - 41 FPT_TST.1 - - Security Target CopyrightSoftCamp Co., Ltd. Page 63 of 76 42 FPT_TEE.1 43 FTA_MCS.2 FIA_UID.1 Rationale (4) 44 FTA_SSL.5 FIA_UAU.1 Rationale (3) 45 FTA_TSE.1 - [Table 5-15] Dependency of TOE security functional requirements Rationale (1): FAU_GEN.1 is subordinated to FPT_STM.1, and as FPT_STM.1 is satisfied by OE.time stamp which is for the security of operating environment, the subordinate relationship is satisfied Rationale (2): FAU_STG.3 and FAU_STG.4 are subordinated to FAU_STG.1, and as FAU_STG.1 is satisfied by OE.DBMS which is for the security of operating environment, the subordinate relationship is satisfied. Rationale (3): FIA_UAU.2 has a hierarchical relationship with FIA_UAU.1, so it has restrictive strength and satisfies the dependencies. Rationale (4): FIA_UID.2 has a hierarchical relationship with FIA_UID.1, so it has restrictive strength and satisfies the dependencies. 5.3.2 Dependency rationale of security assurance requirements The dependency of EAL1 assurance package provided in the CC is already satisfied, the rationale is omitted. The augmented SAR ATE_FUN.1 has dependency on ATE_COV.1. but, ATE_FUN.1 is augmented to require developer testing in order to check if the developer correctly performed and documented the tests in the test documentation, ATE_COV.1 is not included in this PP since it is not necessarily required to show the correspondence between the tests and the TSFIs. Security Target CopyrightSoftCamp Co., Ltd. Page 64 of 76 6. TOE Specificaion summary 6.1 Security audit (FAU) Audit data created in Client and Console is transmitted to Server through encrypted communication, and Server that received the audit data stores such data in DBMS. Audit data created in Server is also stored in DBMS, and the data stored in DBMS can be retrieved by authorized manager through Console which is security management interface. Security alarms The TOE sends an alarm mail to authorized manager when a potential security violation is detected. Potential security violations and the corresponding response actions are shown in [Table 6-2]. Audit data generation The TOE generates the audit records of the auditable events defined in [Table 5-3]. The TOE records the following information when it generates audit records on the acts of administrator and document user. Information User Log type, time, PC IP, PC MAC, success/failure, cause, user ID, user name, user team, user position, PC ID Security document Log type, time, user ID, user name, user team, user position, PC ID, PC IP, PC MAC, file name, original file name, generator ID, time of generation, category name Administrator Log type, time, administrator ID, administrator name, administrator mail, administrator contact information, administrator PC IP, administrator PC MAC, target group, revision history, target ID, target user name, target user position [Table 6-1] Information recorded upon the generation of TOE audit data Potential violation analysis and response actions If one of the potential security violations defined below is detected, the TOE notifies authorized manager of such event via mail in real time, and respond to it according to pre-designated method by the type of security violation. Potential security violation events and the corresponding response actions are as follows. . Potential security violation Countermeasure Authentication failure audit event among auditable event (FIA_UAU.2) Send a notification email to the authorized administrator Integrity violation and Failure of self test of the KCMVP Send a notification email to the Security Target CopyrightSoftCamp Co., Ltd. Page 65 of 76 event among auditable events (FPT_TST.1) authorized administrator Terminate Violation Process Control rules violation audit event among auditable event (FDP_ACF.1) Show pop-up message to the document user [Table 6-2] Response actions for potential security violation Audit review The TOE provides functions to review and selectively review the audit data generated by the TOE and stored in DBMS. Authorized manager can retrieve audit data through Console which is security management interface. Audit data is retrieved from DBMS, the operating environment of the TOE, by executing queries that meet the conditions requested by authorized manager in Console. Authorized manager can retrieve all audit data, which have been generated, and selective audit data according to logical relationship such as AND condition. Selective audit The TOE can selectively generate audit log by type of event defined in [Table 6-3]. It generates audit log for all audit data by default. Item Type of event User log Log in, log out, password change, program deletion Security document log create, read, edit, decrypt, print, auto destruction, authority change, destruction Administrator log Administrator log in, security policy change, log policy change, marking image change, position information change, middle console manager change, server profile change, adding user, deleting user, relocating user, user information change, adding group, deleting group, relocating group, group information change, deleting PC(ID) [Table 6-3] Selectable types of event Action in case of possible audit data loss and prevention of audit data loss The TOE does not provide a function to modify or delete audit data through administrator’s interface. Also, the TOE provides the function to notify authorized administrator of the relevant information via a mail where the amount of audit trail exceeds the predefined limits. When the audit trail reaches more than 80% of the audit storage capacity, the TOE sends a warning mail to the administrator, and when the trail exceeds 95%, it deletes 5% and then notifies the administrator whether the audit trail has been deleted or not via a mail. ※ Related SFRS Security Target CopyrightSoftCamp Co., Ltd. Page 66 of 76 ⚫ FAU_ARP.1, FAU_GEN.1, FAU_SAA.1, FAU_SAR.1, FAU_SAR.3, FAU_SEL.1, FAU_STG.3, FAU_STG.4 6.2 Cryptographic support (FCS) The TOE generates a cryptographic key by using the TOE cryptographic algorithm of the validated cryptographic modules shown in [Table 6-4], namely ‘MagicJCrypto V3.0.0‘ and ‘SCCrypto V1.0’, whose security and implementation conformance are validated by the Korea Cryptographic Module Validation Program (KCMVP). . Item Description Cryptographic module name SCCrypto V1.0 MagicJCrypto V3.0.0 Validation No. CM-194-2026.11 CM-200-2026.12 Validation Grade VSL1 VSL1 Developed company SoftCamp Co., Ltd. DreamSecurity Co.,LTD Validation Date 2021-11-18 2021-12-31 Effective Expiration Date 2026-11-18 2026-12-31 [Table 6-4] validated cryptographic modules Cryptographic key generation (Electronic document encryption) Cryptographic key used for the encryption of a document to be used in the TOE is generated when the document is generated in Client. The cryptographic key is generated through the random bit generator (HASH_DRBG) of ‘SCCrypto V1.0’, a validated cryptographic module used by the TOE. Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size Cryptographic module DEK(Document Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 SCCrypto V1.0 [Table 6-5] Cryptographic key generation algorithm (Electronic document encryption) Cryptographic key generation (TSF data encryption) Cryptographic key used for the encryption of the TSF data is generated in Server and Client of the TOE. The cryptographic key is generated through the TOE cryptographic algorithm of ‘SCCrypto V1.0’ and ‘MagicJCrypto V3.0.0’, validated cryptographic modules used in the TOE. Security Target CopyrightSoftCamp Co., Ltd. Page 67 of 76 Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size Cryptographic module DEK(Document Header Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 MagicJCrypto V3.0.0 DEK(Client Configuration Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 SCCrypto V1.0 KEK(Client Configuration Key Encryption Key) PKCS#5 PBKDB2 (Password-Based Key Derivation Function 2) 128 - DEK(Server Configuration Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 MagicJCrypto V3.0.0 KEK(Server Configuration Key Encryption Key) PKCS#5 PBKDF2 (Password-Based Key Derivation Function 2) 128 - KEK(Database Encryption Key) PKCS#5 PBKDB2 (Password-Based Key Derivation Function 2) 128 - [Table 6-6] Cryptographic key generation algorithm (TSF data encryption) Cryptographic key generation (Encryption by policy) Cryptographic key used to apply policy according to certain user, group or category in the TOE is generated in Server of the TOE by the relevant policy. The cryptographic key is generated through the TOE cryptographic algorithm of ‘MagicJCrypto V3.0.0’, a validated cryptographic module used by the TOE. Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size Cryptographic module KEK(Server Encryption Key) ISO/IEC 18033-2 RSAES (SHA256) 128 MagicJCrypto V3.0.0 KEK(User Encryption Key) ISO/IEC 18033-2 RSAES (SHA256) 128 MagicJCrypto V3.0.0 KEK(Group ISO/IEC 18033-2 RSAES (SHA256) 128 MagicJCrypto Security Target CopyrightSoftCamp Co., Ltd. Page 68 of 76 Encryption Key) V3.0.0 KEK(Category Encryption Key) ISO/IEC 18033-2 RSAES (SHA256) 128 MagicJCrypto V3.0.0 [Table 6-7] Cryptographic key generation algorithm (Encryption by policy) Cryptographic key generation (Communication encryption) Cryptographic key used for the safe encrypted communication between Server and Client, and Server and Console is generated in Server, Console and Client of the TOE. The cryptographic key is generated through the TOE cryptographic algorithm of ‘SCCrypto V1.0’ and ‘MagicJCrypto V3.0.0’, validated cryptographic modules used in the TOE. . Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size Cryptographic module DEK(Communication Data Encryption Key) ISO/IEC 18031 HASH_DRBG (SHA256) 128 SCCrypto V1.0 KEK(Communication Data Key Encryption Key) ISO/IEC 18033-2 RSAES (SHA256) 2048 MagicJCrypto V3.0.0 [Table 6-8] Cryptographic key generation algorithm (Communication encryption) Cryptographic key distribution Cryptographic keys of the TOE are transmitted from Server to Client via a safely encrypted communication sector. The TOE distributes cryptographic keys using RSAES, a cryptographic key distribution method that satisfies ISO/IEC 18033-2. Cryptographic key destruction Cryptographic key is destructed when authorized administrator deletes a policy, deletes a user or a group, and decrypts an encrypted document. Once deleted, the cryptographic key shall not be restored or reused. The timing of cryptographic key destruction varies according to each cryptographic key’s type. When deleting cryptographic key, it is initialized to “0” to be completely deleted in the location where it is stored, and shall not be reused in any security document to which the key was previously applied. Cryptographic operation (Electronic document encryption) The TOE performs cryptographic operation for electronic document encryption using the TOE cryptographic algorithm of ‘SCCrypto V1.0’, a validated cryptographic module whose security and Security Target CopyrightSoftCamp Co., Ltd. Page 69 of 76 implementation conformance are validated by the Korea Cryptographic Module Validation Program (KCMVP). When the cryptographic operation is performed, the validated cryptographic module is operated on the approved mode of operation. The standard, cryptographic key algorithm, and cryptographic key size used for the electronic document encryption are shown in [Table 6-9]. Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size Block cipher KS X 1213 ARIA128 128 [Table 6-9] Cryptographic operation (Electronic document encryption) Cryptographic operation (TSF data encryption) The TOE performs cryptographic operation for TSF data encryption using the TOE cryptographic algorithm of ‘MagicJCrypto V3.0.0’, a validated cryptographic module whose security and implementation conformance are validated by the Korea Cryptographic Module Validation Program (KCMVP). When the cryptographic operation is performed, the validated cryptographic module is operated on the approved mode of operation. The standard, cryptographic key algorithm, and cryptographic key size used for the TSF data encryption are shown in [Table 6-10]. Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size Block cipher KS X 1213 ARIA 128 Hash function KS X ISO/IEC 10118- 3:2001 SHA-256/512 N/A [Table 6-10] Cryptographic operation (TSF data encryption) Cryptographic operation (Encryption by policy) The TOE performs cryptographic operation for encryption by policy using the TOE cryptographic algorithm of ‘MagicJCrypto V3.0.0’, a validated cryptographic module whose security and implementation conformance are validated by the Korea Cryptographic Module Validation Program (KCMVP). When the cryptographic operation is performed, the validated cryptographic module is operated on the approved mode of operation. The standard, cryptographic key algorithm, and cryptographic key size used for the encryption by policy are shown in [Table 6-11]. Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size Block cipher KS X 1213 ARIA 128 [Table 6-11] Cryptographic operation (Encryption by policy) Security Target CopyrightSoftCamp Co., Ltd. Page 70 of 76 Cryptographic operation (Communication encryption) The TOE performs cryptographic operation communication encryption using the TOE cryptographic algorithm of ‘SCCrypto V1.0’ and ‘MagicJCrypto V3.0.0’, validated cryptographic modules whose security and implementation conformance are validated by the Korea Cryptographic Module Validation Program (KCMVP). When the cryptographic operation is performed, the validated cryptographic module is operated on the approved mode of operation. The standard, cryptographic key algorithm, and cryptographic key size used for the communication encryption are shown in [Table 6-12]. Cryptographic key List of standards Cryptographic key generation algorithm Cryptographic key size Block cipher KS X 1213 ARIA 128 public key cipher ISO/IEC 18033-2 RSAES (SHA256) 2048 [Table 6-12] Cryptographic operation (Communication encryption) Random Bit Generation When random numbers are used in SFR where the TOE cryptographic algorithm of validated cryptographic modules, such as main cryptographic key generation like data encryption key (DEK), are required, the TOE uses the random bit generator of ‘SCCrypto V1.0’ and ‘MagicJCrypto V3.0.0’, validated cryptographic modules whose security and implementation conformance are validated by the Korea Cryptographic Module Validation Program (KCMVP). ※ Related SFRS ⚫ FCS_CKM.1(1), FCS_CKM.1(2), FCS_CKM.1(3), FCS_CKM.1(4), FCS_CKM.2, FCS_CKM.4, FCS_COP.1(1), FCS_COP.1(2), FCS_COP.1(3), FCS_COP.1(4), FCS_RBG.1 6.3 User data protection (FDP) Electronic document encryption access control The TOE controls the read, readable count, edit, decrypt, authority change, destruction and auto destruction. of documents to be protected by document user, document user group, category user, and private document user through access control policy such as user-based access control, group- based access control, category-based access control. Descriptions by access control policy are shown in the table below. Access control policy Description Security Target CopyrightSoftCamp Co., Ltd. Page 71 of 76 User-based access control Controlling access by applying policies based on included user Group-based access control Controlling access by applying policies based on included group Category-based access control Controlling access by differentiating access authority to security document by relevant user and group. A user can select only the categories allowed to him/her. [Table 6-13] Access control policy The TOE controls the read, readable count, edit, decrypt, authority change, destruction and auto destruction. of documents to be protected by document user, document user group, category user, and private document user. Type List Subject security attribute User ID, group ID, classification ID Object security attribute User ID, group ID, category ID, authority information [Table 6-14] List of security attributes (Electronic document encryption access control) Electronic document usage access control The TOE controls the print, printable counts, print marking, copy and paste between documents, screen capture and menu control of a part word processing program. of documents to be protected by document user, document user group, category user, and private document user through access control policy such as user-based access control, group-based access control, category-based access control. Access control policy Description User-based access control Controlling access by applying policies based on included user Group-based access control Controlling access by applying policies based on included group Category-based access control Controlling access by differentiating access authority to security document by relevant user and group. A user can select only the categories allowed to him/her. [Table 6-15] Access control policy The TOE controls print, printable counts, print marking, copy and paste between documents, screen capture and menu control of a part word processing program. of documents to be protected by document user, document user group, category user, and private document user. Security Target CopyrightSoftCamp Co., Ltd. Page 72 of 76 Type List Subject security attribute User ID, group ID, classification ID Object security attribute User ID, group ID, category ID, authority information [Table 6-16] List of security attributes (Electronic document usage access control) ※ Related SFRS ⚫ FDP_ACC.1(1), FDP_ACC.1(2), FDP_ACF.1(1), FDP_ACF.1(2) 6.4 Identification and Authentication (FIA) Identification and authentication An authorized administrator or an authorized document user of the TOE shall successfully go through authentication before he or she is allowed to access and control all of security functions, and perform electronic document encryption. The TOE provides a password-based authentication mechanism that performs the identification and authentication using ID and password. The password of administrator and user shall be not less than 9 digits in combination of alphabet letter, number, and special character, which is set by default upon installation. The TOE prevents the reuse of the authentication data using the time stamp value of the authentication. For the management access of authorized administrator and the identification and authentication of authorized document user, if the administrator or user fails the authentication for five consecutive times, the access of the relevant account is blocked for five minutes and the audit record of such authentication failure is stored. Protected authentication feedback When user authentication fails, the TOE shall not provide the feedback for the cause of the failure. The password, which is input during password registration or password change, shall be masked with "●" to make it unrecognizable on the screen. The feedback messages provided upon the log- in failure of administrator or user are as follows. Type Message Where ID does not match “User authentication failed. Please try again.” Where password does not match “User authentication failed. Please try again.” [Table 6-17] Feedback message upon log-in failure TOE Internal mutual authentication Mutual authentications between Server and Client, and Server and Console use Internally Security Target CopyrightSoftCamp Co., Ltd. Page 73 of 76 Implemented Mutual Authentication Protocol. The mutual authentication methods that Client and Console use on Server are identical. For the sake of encrypted communication, Client and Console have communication public key (KEK) which is provided upon installation, and Server has communication public key (KEK) and private key (KEK). When data is transmitted from Client to Server, the data is encrypted using communication data key (DEK) which is temporarily generated, and the communication data key (DEK) is encrypted with communication public key (KEK) before transmitting to Server. Communication data key (DEK) is destructed after receiving the result from Server. The above process is repeated when there is a communication request from Client. ※ Related SFRS ⚫ FIA_AFL.1, FIA_IMA.1, FIA_SOS.1, FIA_UAU.2, FIA_UAU.4, FIA_UAU.7, FIA_UID.2 6.5 Security management(FMT) Management of security functions behaviour The TOE provides chief console manager with the ability to determine, enable, disable and modify behaviors on security functions such as integrity verification request, basic encryption policy management, force encryption policy management, Client log-in policy management, APP control management, print marking and others. For middle console manager, the TOE provides the ability to determine, enable, disable and modify behaviors on security functions such as basic encryption policy management, force encryption policy management, Client log-in policy management, APP control management, print marking and others within the relevant group. For document user, the TOE provides the ability to determine, enable, disable and modify behaviors on security function, namely integrity verification request. Management of security attributes The TOE limits the ability to change, query, modify and delete the default value of the security attributes of administrator, user and group through access control policy strictly to authorized administrator. The TOE enforces restrictive basic policy on the electronic document encryption. TSF Data management The TOE provides server manager with the management function to create a pair of public and private keys, and to change, query, modify, delete and create the default value for mail information setting to send alarm mails. For chief console manager, the TOE provides the management function to change, query, modify, delete and generate the default value on the management of the threshold for the unsuccessful authentication attempts of middle console manager, the management of the identification and authentication information of middle console manager, the management of the session termination time of middle console manager, and the management of accessible IP Security Target CopyrightSoftCamp Co., Ltd. Page 74 of 76 for chief console manager and middle console manager, as well as attributes data such as user, group, category, classification, security policy and log. For middle console manager, the TOE provides the management function to change, query, modify, delete and generate the default value on the management of the identification and authentication data of document user, and attributes data such as user, group and log. For document user, the TOE provides the management function to change, query, modify, delete and generate the default value on the management of authentication data of document user. Management of ID and password The TOE provides the function that enforces to change ID and password upon the initial access of authorized administrator after the product installation. Security roles The users of the TOE are classified as server manager, chief console manager, middle console manager and document user. The table below explains user’s authorities by role. Role Authority Server manager Server management such as server start-up Chief console manager All of the security functions provided by Console Middle console manager (Group manager) Some of the security functions (management of encryption policy on the relevant group) provided by Console according to the authorities set by authorized chief console manager who created the relevant middle console manager account Document user Document encryption/decryption by receiving encryption policy in a device where Client is installed [Table 6-18] Authorities by security role ※ Related SFRS ⚫ FMT_MOF.1, FMT_MSA.1, FMT_MSA.3, FMT_MTD.1, FMT_PWD.1, FMT_SMF.1, FMT_SMR.1 6.6 Protection of the TSF (FPT) Basic internal TSF data transfer protection The TOE protects transmitted TSF data such as audit data and sensitive security parameters from disclosure and modification when the TSF data is transmitted between separate parts of the TOE using the TOE encryption algorithm of ‘MagicJCrypto V3.0.0‘ and ‘SCCrypto V1.0’, validated encryption modules whose security and implementation conformance are validated by the Korea Security Target CopyrightSoftCamp Co., Ltd. Page 75 of 76 Cryptographic Module Validation Program (KCMVP). Basic protection of stored TSF data The TOE protects the passwords of authorized manager and user, cryptographic key, critical security parameters, TOE configuration values (security policy and configuration parameters) and audit data, which are stored in TSF data storage, from unauthorized disclosure and modification. In particular, the TSF data such as the passwords of authorized administrator and user, data encryption key (DEK), critical security parameters, TOE configuration values, and DBMS connection information are encrypted and stored by the TOE encryption algorithm of "MagicJCrypto V3.0.0", a validated encryption module. The data encryption key (DEK) shall be encrypted by the TEO encryption algorithm that is provided by the validated encryption module using key encryption key (KEK) before stored. The encryption key and the critical security parameters loaded on memory shall not exist as plaintext when they are no more in use as encryption/decryption operation is completed. TSF self-testing The TOE runs self-tests (Health Check) at regular intervals (1 hour) during initial start-up and normal operation to demonstrate the correct operation of its components – Server, Client and Console. Client runs the self-test together, only if it is activated, at regular intervals during initial start-up and normal operation. The objects of the self-test include critical processes that perform the TSF, and the validated encryption modules are the result of the self-test. The TOE provides the function to verify the integrity on TSF data such as key execution files and configuration, and the TSF itself. The integrity verification is performed when authorized administrator wants or at regular intervals (1 hour) during initial start-up and normal operation. The integrity data of the TOE is registered in DBMS, and is compared with TOE’s configuration information distributed to judge if it is consistent with the configuration information. The objects of integrity verification are key execution files and configuration files. - Server, Client, Console execution files and library files - Client configuration file Testing of external entities In order to demonstrate the correct operation of mail server and DMS, which are the objects of external entity testing, of Server as a component of the TOE, its operation status is examined at regular intervals (3 minutes) during initial start-up and normal operation. For mail server, the operation status is judged by test mail sending result. For DBMS, a query that returns current time is transmitted to judge the status of the operation based on the query result. ※ Related SFRS ⚫ FPT_ITT.1, FPT_PST.1, FPT_PST.2, FPT_TST.1, FPT_TEE.1 Security Target CopyrightSoftCamp Co., Ltd. Page 76 of 76 6.7 TOE Access (FTA) Per user attribute limitation on multiple concurrent sessions The TOE limits the number of concurrent sessions up to 1 to block simultaneous access to the same account. It also blocks simultaneous access to the same authority. When there is an attempt at simultaneous access to the same account or the same authority, it blocks new connection and maintains the existing connection. Management of TSF-initiated sessions The TOE terminates a session if there is no activity during a certain amount of idle time (five minutes by default) after server manager or chief console manager or middle console manager logs in. TOE session establishment The TOE controls TOE access by allowing only registered IP (one IP by default) to access the security management interface. Upon the first log-in after the installation of the TOE, connection IPs are established. After the installation, the connection IPs can be added, modified and deleted by establishing the list of IPs that are allowed to log in to security management. When establishing IP, it is not allowed to add an IP address range. Furthermore, IPs such as 0.0.0.0, 192.168.10.*, any, etc. is not allowed to be established. ※ Related SFRS ⚫ FTA_MCS.2, FTA_SSL.5, FTA_TSE.1