General Business Use
Security Target Lite
AT90SC9604RU
Important notice to readers…
Atmel makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which
is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors
which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice,
and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property
of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are
not authorized for use as critical components in life support devices or systems.
The security of any system in which the product is used will depend on the system’s security as a whole. Where security or
cryptography features are mentioned in this document this refers to features which are intended to increase the security of the product
under normal use and in normal circumstances.
All products are sold subject to Atmel’s Terms & Conditions of Supply and the provisions of any agreements made between Atmel and
the Customer. In ordering a product covered by this document the Customer agrees to be bound by those Terms & Conditions and
agreements and nothing contained in this document constitutes or forms part of a contract (with the exception of the contents of this
Notice). A copy of Atmel’s Terms & Conditions of Supply is available on request.
 Atmel Corporation 2007
(13 Feb 07) General Business Use 3 of 70
TPG0142A
AT90SC9604RU Contents
Section 1 AT90SC9604RU Security Target Lite.......................................................... 9
1.1 Identification................................................................................................. 9
1.2 Overview...................................................................................................... 9
1.3 Common Criteria Conformance Claim....................................................... 10
1.4 Document Structure................................................................................... 10
1.5 Scope and Terminology............................................................................. 10
1.6 References ................................................................................................ 11
1.7 Revision History......................................................................................... 11
Section 2 Target of Evaluation Description................................................................ 13
2.1 Product Type ............................................................................................. 13
2.2 Smartcard Product Life-cycle..................................................................... 16
2.3 TOE Environment ...................................................................................... 18
2.4 TOE Logical Phases .................................................................................. 20
2.5 TOE Intended Usage ................................................................................. 20
2.6 General IT Features of the TOE ................................................................ 22
Section 3 TOE Security Environment ........................................................................ 23
3.1 Assets ........................................................................................................ 23
3.2 Assumptions .............................................................................................. 23
3.3 Threats....................................................................................................... 26
3.4 Organizational Security Policies ................................................................ 30
Section 4 Security Objectives.................................................................................... 31
4.1 Security Objectives for the TOE................................................................. 31
4.2 Security Objectives for the Environment.................................................... 35
AT90SC9604RU Security Target Lite
4 of 70 General Business Use (13 Feb 07)
TPG0142A
Section 5 TOE Security Functional Requirements .................................................... 41
5.1 Functional Requirements Applicable to Phase 3 Only
(Testing Phase) .........................................................................................41
5.2 Functional Requirements Applicable to Phases 3 to 7 ..............................43
5.3 Functional Requirements Applicable to PMT in Phase 4 to 7 Only ...........49
5.4 TOE Security Assurance Requirements ....................................................50
Section 6 TOE Summary Specification...................................................................... 53
6.1 TOE Security Functions.............................................................................53
6.2 TOE Assurance Measures.........................................................................60
Section 7 PP Claims.................................................................................................. 65
7.1 PP Reference.............................................................................................65
7.2 PP Refinements.........................................................................................65
7.3 PP Additions ..............................................................................................65
................................................................................................................... 66
................................................................................................................... 66
................................................................................................................... 66
Glossary..................................................................................................... 67
(13 Feb 07) General Business Use 5 of 70
TPG0142A
Figures
Figure 2-1 Smartcard Product Life Cycle ...........................................................................17
AT90SC9604RU Security Target
6 of 70 General Business Use (13 Feb 07)
TPG0142A
(13 Feb 07) Atmel Registered Confidential Proprietary 7 of 70
TPG0142A Do Not Copy
AT90SC9604RU Tables
Table 2-1 Classic and XP Write modes....................................................................... 14
Table 2-2 Smartcard Product Life-cycle...................................................................... 16
Table 2-3 Phases 4 to 7 Product Users ...................................................................... 21
Table 3-1 Threats and Phases.................................................................................... 29
Table 5-1 IFCSF_Policy .............................................................................................. 47
Table 6-1 Relationship Between Security Requirements and Security Functions ...... 59
Table 6-2 Relationship Between Assurance Requirements and Measures ................ 63
AT90SC9604RU Security Target Lite
8 of 70 Atmel Registered Confidential Proprietary (13 Feb 07)
Do Not Copy TPG0142A
(13 Feb 07) General Business Use 9 of 70
TPG0142A
Section 1
AT90SC9604RU Security Target Lite
1.1 Identification
1 Title: AT90SC9604RU Security Target Lite
2 This Security Target Lite has been constructed with Common Criteria (CC) Version 2.2.
1.2 Overview
3 This Security Target Lite (ST_Lite) is conformant to the Protection Profile PP/9806, it is
for a microcontroller (MCU) device with security features. The device is a member of a
family of single chip MCU devices which are intended for use within Smartcard
products. The family codename is AVR ASL4 and the ‘parent’ device of the family, from
which other family members will be derived, is the VEGA2 AT90SC19264RC.
4 The AT90SC9604RU MCU device:
5 is being evaluated against the CC Smartcard Integrated Circuit Protection Profile
PP/9806 to Evaluation Assurance Level 4 (EAL4) augmented with AVA_VLA.4,
ADV_IMP.2, ALC_DVS.2 and AVA_MSU.3 under the Common Criteria scheme. Atmel
Smart Card ICs, a division of ATMEL Corporation, is the developer and the sponsor for
the AVR ASL4 evaluations.
6 The devices in the AVR ASL4 family are based on the AVR RISC family of single-chip
microcontroller devices. The AVR RISC family, with designed-in security features, is
based on the industry-standard AVR low-power HCMOS core and gives access to the
powerful instruction set of this widely used device. AVR ASL4 devices are equipped
with Flash, RAM, ROM and EEPROM, cryptographic coprocessors, and a host of
security features to protect device assets, making them suitable for a wide range of
smartcard applications.
Product Identification Number AT58U08
Revision Rev D
AT90SC9604RU Security Target Lite
10 of 70 General Business Use (13 Feb 07)
TPG0142A
1.3 Common Criteria Conformance Claim
7 This Security Target Lite is conformant to parts 2 and 3 of the Common Criteria, V2.2,
as follows:
! Part 2 conformant: the security functional requirements are based on those
identified in part 2 of the Common Criteria.
! Part 3 conformant: the security assurance requirements are in the form of an EAL
(assurance package) the components package and augmentation are defined in
part 3 of the Common Criteria.
8 The purpose of this document is to satisfy the Common Criteria (CC) requirements for
a Security Target Lite; in particular, to specify the security requirements and functions,
and the assurance requirements and measures, in accordance with Protection Profile
PP/9806, Smartcard Integrated Circuit V2.0.
1.4 Document Structure
9 Section 1 introduces the Security Target Lite, and includes sections on terminology and
references.
10 Section 2 contains the product description and describes the TOE as an aid to the
understanding of its security requirements and addresses the product type, the
intended usage and the general features of the TOE.
11 Section 3 describes the TOE security environment.
12 Section 4 describes the required security objectives.
13 Section 5 describes the TOE security functional requirements and the security
assurance requirements.
14 Section 6 describes the TOE security functions.
15 Section 7 describes the Protection Profile (PP) claims.
16 Appendix provides a glossary of the terms and abbreviations.
1.5 Scope and Terminology
17 This document is based on the AT90SC9604RU Technical Data Sheet [TD].
18 The term Target of Evaluation (TOE) is standard CC terminology and refers to the
product being evaluated, the AT90SC9604RU device in this case. Downloaded test
AT90SC9604RU Security Target Lite
(13 Feb 07) General Business Use 11 of 70
TPG0142A
software will be used for evaluation purposes but is outside the scope of the TOE.
Description of how to use the security features can be found in [TD].
19 Security objectives are defined herein with labels in the form O.xx_xx. These labels are
used elsewhere for reference. Similarly, threats, assumptions and organizational
security policy are defined with labels of the form T.xx_xx, A.xx_xx, and P.xx_xx
respectively.
20 Hexadecimal numbers are prefixed by $, e.g. $FF is 255 decimal. Binary numbers are
prefixed by%, e.g.%0001 1011 is decimal 27. An integer value may be expressed as a
hexadecimal, binary or decimal number, whichever form is the most convenient.
1.6 References
21 The AT90SC9604RU Deliverables List (EDL) identifies the latest revision of the
following documents.
1.7 Revision History
[ESOF] AT90SC Strength of Security Functions Analysis
[STI] Standard Test Interface
[TD] AT90SC9604RU Technical Data (TPR0241)
[TMR-User] AVR3core Production Test Software User Guide
[PME] Package Mode Test
Family (TPR0166)
[WSR] Wafer Saw Recommendations (TPG0079)
Rev Date Description Originator
A 13 Feb 07 Initial release Gordon Caffrey
AT90SC9604RU Security Target Lite
12 of 70 General Business Use (13 Feb 07)
TPG0142A
(13 Feb 07) General Business Use 13 of 70
TPG0142A
Section 2
Target of Evaluation Description
22 This part of the Security Target Lite (ST_Lite) describes the Target of Evaluation (TOE)
as an aid to the understanding of its security requirements and address the product
type, the intended usage and the general features of the TOE.
2.1 Product Type
23 The TOE is the single chip microcontroller unit to be used in a smartcard product,
independent of the physical interface and the way it is packaged. Specifically, the TOE
is the AT90SC9604RU device from the AVR ASL4 family of smartcard devices.
Generally, a smartcard product may include other optional elements (such as specific
hardware components, batteries, capacitors, antennae) but these are not in the scope
of this Security Target Lite.
24 The devices in the AVR ASL4 family are based on ATMEL's AVR RISC family of
single-chip microcontroller devices. The AVR RISC family, with designed-in security
features, is based on the industry-standard AVR RISC low-power HCMOS core and
gives access to the powerful instruction set of this widely used device. Different AVR
ASL4 family members offer various options. The AVR ASL4 family of devices are
designed in accordance with the ISO standard for integrated circuit cards (ISO 7816),
where appropriate.
25 The TOE requires embedded software to test the device and demonstrate certain
security characteristics during the development phase. In the end-usage phase there
will be no embedded test software in the TOE. Test software will be downloaded into
the device EEPROM and be fully erased before devices leave the test environment.
This test software is only used in the testing phase of the TOE life cycle and is fully
erased before disabling Test Mode, therefore this software is outwith the scope of the
evaluation. Test Mode disable is achieved by sawing the wafer.
26 Any faulty devices returned by a customer can be put into package mode. This allows
the test engineer to access the EEPROM to analyse the failure. On entering package
mode the EEPROM is erased clearing any customer data, Package Mode only allows
a limited set operations and inputs [PME]. Package mode can only be entered on sawn
wafers. After analysis by the test engineer the parts are scrapped and destroyed.
27 The TOE widely uses ATMEL high density non volatile memories: it features 96K bytes
of AVR ROM program memory, 4K bytes of EEPROM program/data memory, 2K bytes
of static RAM memory.
AT90SC9604RU Security Target Lite
14 of 70 General Business Use (13 Feb 07)
TPG0142A
28 The EEPROM includes 64 bytes of One Time Programmable (OTP) memory and a
192-byte of bit-addressable area.
29 The EEPROM includes a charge pump and its oscillator, and also a scrambling key.
30 The NVM can be operated in two ways Classic and XP operating mode. It features byte
and page writing modes and uses BHS, IDLE or Polling modes [TD].
31 Expert (XP) System allows the NVM to be written by page and erase block, full page or
partial page. A smart write feature is also available to avoid non-allowed actions [TD].
32 Table Table 2-1 gives a summary of the write modes for the two operating modes.
Table 2-1 Classic and XP Write modes
33 The TOE also includes a Checksum Accelerator, a CRC-16 peripheral(Compliant with
ISO/IEC 3309), a Random Number Generator, a fast hardware DES/3DES peripheral.
34 The TOE includes security logic comprising detectors which monitor voltage, frequency
and temperature.
35 The TOE is equipped with logic peripherals including 2 timers, 1 serial port for use in
contact mode, an ISO7816 interface and an ISO7816 controller.
Note
If a full NVM erase is triggered, the OTP area is cleared during this erase.
Please note this only clears the customer information, the traceability
information loaded by Atmel is still retained.
Write Modes Classic Write Modes XP
Standard EEPROM
Page mode with autoerase
Page mode without autoerase
Byte mode with autoerase
Byte mode without autoerase
Erase only
Erase + Write
Write only
Full page erase
Partial page erase
Block erase
Bit Addressable
Page mode with autoerase
Page mode without autoerase
Byte mode with autoerase
Byte mode without autoerase
Erase only
Pseudo bit by page
Pseudo bit by byte
Erase + Write
Write only
Full page erase
Partial page erase
Block erase
Bit write
Byte Writable OTP Pseudo bit by byte Write only
Target of Evaluation Description
(13 Feb 07) General Business Use 15 of 70
TPG0142A
36 The TOE includes a powerful Firewall that protects all memories, peripheral and IO
register accesses. This Firewall defines the user modes (Supervisor and Non-Firewall
Control of Software Execution
AT90SC9604RU Security Target Lite
16 of 70 General Business Use (13 Feb 07)
TPG0142A
2.2 Smartcard Product Life-cycle
37 The smartcard product life-cycle consists of 7 phases where the following authorities
are involved.
38 The limits of the evaluation correspond to phases 2 and 3, including the phase 1
delivery and verification procedures and the TOE delivery to the IC packaging
manufacturer ; procedures corresponding to phases 4, 5, 6 and 7 are outside the scope
of the Security Target Lite.
39 Nevertheless, in certain cases, it would be of great interest to include the phase 4 (IC
packaging and testing), within the limits of the TOE. However, for the time being, this
option remains outside the scope of this Security Target Lite.
Table 2-2 Smartcard Product Life-cycle
Phase 1 Smartcard software
development
The smartcard software developer is in charge of the
smartcard embedded software development and the
specification of IC pre-personalization requirements,
Phase 2 IC Development The IC designer designs the IC, develops IC dedicated
software, provides information, software or tools to the
smartcard software developer, and receives the software
from the developer, through trusted delivery and
verification procedures. From the IC design, IC dedicated
software and smartcard embedded software, the IC
designer constructs the smartcard IC database,
necessary for the IC photomask fabrication.
Phase 3 IC manufacturing and
testing
The IC manufacturer is responsible for producing the IC
through three main steps:
! IC manufacturing
! IC testing
! IC pre-personalization
Phase 4 IC packaging and
testing
The IC packaging manufacturer is responsible for the IC
packaging and testing.
Phase 5 Smartcard product
finishing process
The smartcard product manufacturer is responsible for the
smartcard product finishing process and testing.
Phase 6 Smartcard
personalization
The personalizer is responsible for the smartcard
personalization and final tests. Other application software
may be loaded onto the chip at the personalization
process.
Phase 7 Smartcard end-usage The smartcard issuer is responsible for the smartcard
product delivery to the smartcard end-user, and the end of
life process.
Target of Evaluation Description
(13 Feb 07) General Business Use 17 of 70
TPG0142A
40 Figure 2-1 describes the Smartcard product life-cycle. [PLC] contains the addresses of
the relevant organizations.
Figure 2-1 Smartcard Product Life Cycle
Legend
Limits of the
development cycle
Trusted delivery and
verification procedures
Embedded software
Pre-personalization data
IC sensitive information
software, tools (not
applicable)
Test Libraries
Atmel Design Centres
Production
Phase
User
Phase
Development
Phase
Smartcard IC Database Construction
IC Photomask Fabrication
IC Testing and Security Encoding
IC Manufacturing
IC Packaging
Smartcard Product Finishing Process
Testing (1)
Personalization
Testing (1)
Smartcard Product End-Usage (1)
End of Life Process
IC Design IC Dedicated Software
IC Personalization requirements Smartcard embedded software (not applicable)
IC Personalization requirements
Testing (1)
Phase 7
Phase 6
Phase 5
Phase 3
Phase 2
Phase 1
Phase 4
IC Personalization requirements
Product
Construction
Product
Usage
(1)
Any faulty TOEs would be returned
to the Atmel Testing Centre and placed
in Package Mode to perform failure
analysis after analysis the faulty TOE
is scrapped and destroyed.
AT90SC9604RU Security Target Lite
18 of 70 General Business Use (13 Feb 07)
TPG0142A
41 These different phases may be performed at different sites; procedures on the delivery
process of the TOE shall exist and be applied for every delivery within a phase or
between phases. This includes any kind of delivery performed from phase 1 to phase
7, including:
! Intermediate delivery of the TOE or the TOE under construction within a phase
! Delivery of the TOE or the TOE under construction from one phase to the next
42 These procedures shall be compliant with the assumptions [A_DLV] developed in
Section 3.2.2.
43 Although the return of faulty TOEs is applicable to Phases 4-7 therefore outwith the
scope of the evaluation, the fact that Package mode is controlled by hardware means
that Package mode is within the scope of the evaluation. Note after analysis using
Package Mode the faulty TOE is scrapped and destroyed
2.3 TOE Environment
44 Considering the TOE, three types of environments are defined:
! Development environment corresponding to phase 2
! Production environment corresponding to phase 3
! User environment, from phase 4 to phase 7
2.3.1 TOE Development Environment
45 To assure security, the environment in which the development takes place is made
secure with controllable accesses having traceability. Access to the development
building is strictly monitored by a security person. Visitors must sign a log book and
record the time of arrival and time of departure to the building. All visitors are escorted
by authorized personnel at all times. All authorized personnel involved fully understand
the importance and the rigid implementation of the defined security procedures.
46 The development begins with the TOE's specification. All parties in contact with
sensitive information are required to abide by Non-Disclosure Agreements.
Target of Evaluation Description
(13 Feb 07) General Business Use 19 of 70
TPG0142A
47 Reticles and photomasks are generated from the verified IC database. The reticles and
photomasks are then handcarried to the wafer fab processing facilities.
2.3.2 TOE Production Environment
48 Production starts within the Atmel Fabrication Plant; here the silicon wafers undergo
diffusion processing in 25-wafer lots. Computer tracking at wafer level throughout the
process is achieved by a manufacturing database batch tracking system.
49 The manufacturing database is an on-line manufacturing tracking system which
monitors the progress of the wafers through the fabrication cycle. After fabrication the
wafers are sent to Test Fab where they are thinned to a pre-specified thickness and
tested. ATMEL test the TOE to assure conformance with the device specification.
During the IC testing, security encoding is performed where some of the EEPROM
bytes are programmed with the unique traceability information, and the customer
software is loaded in the EEPROM.
50 The wafers are inked to separate the functional ICs from the non-functional ICs. Finally,
the wafers are sawn and then shipped to the customer. Unsawn wafers may be shipped
to the customer if requested, the customer is given guidance on wafer saw [WSR].
2.3.3 TOE User Environment
51 The TOE user environment is the environment of phases 4 to 7.
52 At phases 4, 5, and 6, the TOE user environment is a controlled environment.
53 Following the sawing step, the wafers are split into individual dies. The good ICs are
assembled into modules in a module assembly plant.
54 Further testing is carried out followed by the shipment of the modules to the smartcard
product manufacturer (embedder) by means of a secure carrier.
55 Additional testing occurs followed by smartcard personalization, retesting and then
delivery to the smartcard issuer.
AT90SC9604RU Security Target Lite
20 of 70 General Business Use (13 Feb 07)
TPG0142A
End-user environment (Phase 7)
56 Smartcards are used in a wide range of applications to assure authorized conditional
access. Examples of such are Access control, Transport, Banking, and ID applications.
57 Therefore, the user environment covers a wide spectrum of very different functions,
thus making it difficult to avoid or monitor any abuse of the TOE.
2.4 TOE Logical Phases
58 During its construction usage, the TOE may be under several life logical phases. These
phases are sorted under a logical controlled sequence. The change from one phase to
the next shall be under the TOE control.
2.5 TOE Intended Usage
59 The TOE can be incorporated in several applications such as:
! Banking and finance market for credit/debit cards, electronic purse (stored value
cards) and electronic commerce.
! Network based transaction processing such as mobile phones (GSM SIM cards),
pay-TV (subscriber and pay-per-view cards), communication highways (Internet
access and transaction processing).
! Transport and ticketing market (access control cards).
! Governmental cards (ID-cards, healthcards, driver license etc).
! Multimedia commerce and Intellectual Property Rights protection.
60 During the phases 1, 2, 3, the product is being developed and produced. The
administrators are the following:
! The smartcard embedded software developer
! The smartcard IC designer
! The IC manufacturer
Target of Evaluation Description
(13 Feb 07) General Business Use 21 of 70
TPG0142A
61 Table 2-3 lists the users of the product during phases 4 to 7.
Table 2-3 Phases 4 to 7 Product Users
62 The MCU may be used in the following modes:
a) Test mode, in which the MCU runs under the control of dedicated test software
written to EEPROM via a test interface, and in conjunction with stimulus provided
by an external test system. This mode is intended to be used solely by authorized
development staff.
b) User mode, in which the MCU runs under control of the smartcard embedded
software. It is intended that customers and end-users will always use the MCU in
user mode.
Phase 4 ! Packaging manufacturer (administrator)
! Smartcard embedded software developer
! System integrator, such as the terminal software developer
Phase 5 ! Smartcard product manufacturer (administrator)
! Smartcard embedded software developer
! System integrator, such as the terminal software developer
Phase 6 ! Personalizer (administrator)
! Customers who, before manufacture, determine the MCU’s mask
options and the initial memory contents (i.e. the application
program), and who, after manufacture, incorporate the MCU into
devices. Customers are trusted and privileged users.
! Smartcard issuer (administrator).
! Smartcard embedded software developer.
! System integrator, such as the terminal software developer.
Phase 7 ! Smartcard issuer (administrator)
! Smartcard end-user, who use devices incorporating the MCU.
End-users are not trusted and may attempt to attack the MCU.
! Smartcard software developer.
! System integrator, such as the terminal software developer.
The IC manufacturer and the smartcard product
manufacturer may also receive ICs for analysis, should
problems occur during the smartcard usage. After analysis
faulty devices are scrapped and destroyed
Note
AT90SC9604RU Security Target Lite
22 of 70 General Business Use (13 Feb 07)
TPG0142A
63 During the initial part of the manufacturing process, the MCU is set to test mode.
Authorized development staff then test the MCU. After testing, test mode is
permanently disabled by sawing off the test pads, and the MCU is set to user
mode.Test Mode is permanently disabled by sawing the wafer.
64 Package Mode is a mode similar to Test Mode for testing returns from Phases 4-7.
Package mode runs a limited subset of test commands via a test interface, and in
conjunction with stimulus provided by an external test system. This mode is intended
to be used solely by authorized staff. After analysis the faulty devices are scrapped and
destroyed
65 If a faulty TOE is returned from the field then analysis can be done either in user mode,
or package mode by an authorized test engineer.
66 The only modes of operation are those stated in paragraph 62 and 64.
67 Once manufactured, the MCU operates by executing the smartcard embedded
software, which is stored in AVR ROM. The contents of the AVR ROM cannot be
modified, whereas the contents of the EEPROM can, in general, be written to or erased,
under the control of the smartcard embedded software.
68 The FireWall (Memories and Peripherals Protection Unit) allows the smartcard
embedded software to prevent read/write/execute access to (parts of) AVR ROM,
EEPROM, RAM, and peripherals from EEPROM.
69 The ISO7816 compliant I/O port can be used to pass data to or from the MCU. The
application program determines how to interpret the data.
2.6 General IT Features of the TOE
70 The TOE IT functionalities consist of data storage and processing such as:
! Access Control
! Transport
! Banking
! ID Applications
TOE Security Environment
(13 Feb 07) General Business Use 23 of 70
TPG0142A
Section 3
TOE Security Environment
71 This section describes the security aspects of the environment in which the TOE is
intended to be used, and addresses the description of the assumptions, the assets to
be protected, the threats, and the organizational security policies.
3.1 Assets
72 Assets are security relevant elements of the TOE that include the:
! Application data of the TOE comprising the IC pre-personalization requirements,
such as the AVR ROM, EEPROM, and OTP contents.
! Smartcard embedded software.
! IC dedicated software
! IC specification, design, development tools and technology
73 Therefore, the TOE itself is an asset.
74 Assets must be protected in terms of confidentiality and integrity.
3.2 Assumptions
75 It is assumed that this section concerns the following items:
! Due to the definition of the TOE limits, any assumption for the smartcard software
development (phase 1 is outside the scope of the TOE)
! Any assumption from phases 4 to 7 for the secure usage of the TOE, including the
TOE trusted delivery procedures
76 Security is always dependent on the whole system: the weakest element of the chain
determines the total system security. Assumptions described hereafter must be
considered for a secure system using smartcard products:
! Assumptions on phase 1
! Assumptions on the TOE delivery process (phases 4 to 7)
! Assumptions on phases 4-5-6
AT90SC9604RU Security Target Lite
24 of 70 General Business Use (13 Feb 07)
TPG0142A
! Assumptions on phase 7
3.2.1 Assumptions on Phase 1
3.2.2 Assumptions on the TOE Delivery Process (Phases 4 to 7)
77 Procedures shall guarantee the control of the TOE delivery and storage process and
conformance to its objectives as described in the following assumptions.
A.SOFT_ARCHI The smartcard embedded software shall be designed in a
secure manner, that is focusing on integrity of program and
data.
A.DEV_ORG Procedures dealing with physical, personnel,
organizational, technical measures for the confidentiality
and integrity of smartcard embedded software (e.g. source
code and any associated documents) and IC designer
proprietary information (tools, software, documentation.)
shall exist and be applied in software development.
A.DLV_PROTECT Procedures shall ensure protection of TOE material and
information under delivery and storage. A procedure shall
ensure protection of the TOE for unsawn wafer delivery.
A.DLV_AUDIT Procedures shall ensure that corrective actions are taken in
case of improper operation in the delivery process and
storage.
A.DLV_RESP Procedures shall ensure that people dealing with the
procedure for delivery have got the required skill.
TOE Security Environment
(13 Feb 07) General Business Use 25 of 70
TPG0142A
3.2.3 Assumptions on Phases 4 to 6
3.2.4 Assumptions on Phase 7
A.USE_TEST It is assumed that appropriate functionality testing of the IC
is used in phases 4, 5 and 6.
A.USE_PROD It is assumed that security procedures are used during all
manufacturing and test operations through phases 4, 5, 6 to
maintain confidentiality and integrity of the TOE and of its
manufacturing and test data (to prevent any possible copy,
modification, retention, theft or unauthorized use). In the
case where unsawn wafers are delivered, appropriate
guidance on sawing will be known and used by the
customer.
A.USE_DIAG It is assumed that secure communication protocols and
procedures are used between smartcard and terminal.
A.USE_SYS It is assumed that the integrity and confidentiality of
sensitive data stored/handled by the system (terminals,
communications...) is maintained.
AT90SC9604RU Security Target Lite
26 of 70 General Business Use (13 Feb 07)
TPG0142A
3.3 Threats
78 The TOE as defined in Section 2 is required to counter the threats described hereafter;
a threat agent wishes to abuse the assets either by functional attacks, environmental
manipulations, specific hardware manipulations or by any other types of attacks.
79 Threats have to be split in:
! Threats against which specific protection within the TOE is required (class I),
! Threats against which specific protection within the environment is required (class
II).
3.3.1 Unauthorized Full or Partial Cloning of the TOE
3.3.2 Threats on Phase 1 (Delivery and Verification Procedures)
80 During phase 1, three types of threats have to be considered:
a) Threats on the smartcard’s embedded software and its environment of
development, such as:
! Unauthorized disclosure
! Modification or theft of the smartcard embedded software and any additional
data at phase 1.
Considering the limits of the TOE, these previous threats are outside the scope of this
Security Target Lite.
b) Threats on the assets transmitted from the IC designer to the smartcard software
developer during the smartcard development.
c) Threats on the smartcard embedded software and any additional application data
transmitted during the delivery process from the smartcard embedded software
developer to the IC designer.
T.CLON Functional cloning of the TOE (full or partial) appears to be
relevant to any phases of the TOE life-cycle, from phase 1
to phase 7.
Generally, this threat is derived from specific threats
combining unauthorized disclosure, modification or theft of
assets at different phases.
(13 Feb 07) General Business Use 27 of 70
TPG0142A
81 The previous types b and c threats are described hereafter.
3.3.3 Threats on Phases 2 to 7
82 During these phases, the assumed threats could be described in three types:
! Unauthorized disclosure of assets
! Theft or unauthorized use of assets
! Unauthorized modification of assets
Unauthorized disclosure of assets
83 This type of threats covers unauthorized disclosure of assets by attackers who may
possess a wide range of technical skills, resources and motivation. Such attackers may
also have technical awareness of the product.
T.DIS_INFO Unauthorized disclosure of the assets delivered by the IC
designer to the smartcard software developer such as
sensitive information on IC specification, design and
technology, software and tools if applicable.
T.DIS_DEL Unauthorized disclosure of the smartcard embedded
software and any additional application data (such as IC
pre-personalization requirements) during the delivery
process to the IC designer.
T.MOD_DEL Unauthorized modification of the smartcard embedded
software and any additional application data (such as IC
pre-personalization requirements) during the delivery
process to the IC designer.
T.T_DEL Theft of the smartcard embedded software and any
additional application data (such as IC pre-personalization
requirements) during the delivery process to the IC
designer.
T.DIS_DESIGN Unauthorized disclosure of IC design.
This threat covers the unauthorized disclosure of proprietary
elements such as IC specification, IC design, IC technology
detailed information, IC hardware security mechanisms
specifications.
T.DIS_SOFT Unauthorized disclosure of smartcard embedded software
and data such as access control, authentication system,
data protection system, memory partitioning.
AT90SC9604RU Security Target Lite
28 of 70 General Business Use (13 Feb 07)
TPG0142A
Theft or unauthorized use of assets
84 Potential attackers may gain access to the TOE and perform operations for which they
are not authorized. For example, such attackers may personalize the product in an
unauthorized manner, or try to gain fraudulous access to the smartcard system.
Unauthorized modification of assets
85 The TOE may be subjected to different types of logical or physical attacks which may
compromise security. Due to the intended usage of the TOE (the TOE environment may
be hostile), the TOE security parts may be bypassed or compromised reducing the
integrity of the TOE security mechanisms and disabling their ability to manage the TOE
security. This type of threat includes the implementation of malicious trojan horses.
T.DIS_DSOFT Unauthorized disclosure of IC dedicated software.
This threat covers the unauthorized disclosure of IC
dedicated software including security mechanisms
specifications and implementation.
T.DIS_TEST Unauthorized disclosure of test information such as full
results of IC testing including interpretations.
T.DIS_TOOLS Unauthorized disclosure of development tools.
This threat covers potential disclosure of IC development
tools and testing tools (analysis tools, microprobing tools).
T.DIS_PHOTOMASK Unauthorized disclosure of photomask information, used for
photoengraving during the silicon fabrication process.
T.T_SAMPLE Theft or unauthorized use of TOE silicon samples, for
example, bond out chips.
T.T_PHOTOMASK Theft or unauthorized use of TOE photomasks.
T.T_PRODUCT Theft or unauthorized use of smartcard products.
T.MOD_DESIGN Unauthorized modification of IC design.
This threat covers the unauthorized modification of IC
specification, IC design including IC hardware security
mechanisms specifications and realization.
T.MOD_PHOTOMASK Unauthorized modification of TOE photomasks.
T.MOD_DSOFT Unauthorized modification of IC dedicated software
including modification of security mechanisms.
T.MOD_SOFT Unauthorized modification of smartcard embedded
software and data.
TOE Security Environment
(13 Feb 07) General Business Use 29 of 70
TPG0142A
86 Table 3-1 indicates the relationships between the smartcard phases and the threats.
Table 3-1 Threats and Phases
Threats Phase 1 Phase 2 Phase 3 Phase 4 Phase 5 Phase 6 Phase 7
Functional cloning
T.CLON Class II Class II Class I/II Class I Class I Class I Class I
Unauthorized disclosure of assets
T.DIS_INFO Class II
T.DIS_DEL Class II
T.DIS_SOFT Class II Class I/II Class I Class I Class I Class I
T.DIS_DSOFT Class II Class I/II Class I Class I Class I Class I
T.DIS_DESIGN Class II Class I/II Class I Class I Class I Class I
T.DIS_TOOLS Class II Class II
T.DIS_PHOTOMASK Class II Class II
T.DIS_TEST Class I/II Class I Class I Class I
Theft or unauthorized use of assets
T.T_DEL Class II
T.T_SAMPLE Class II Class I/II Class I Class I
T.T_PHOTOMASK Class II Class II
T.T_PRODUCT Class I/II Class I Class I Class I Class I
Unauthorized modification threats
T.MOD_DEL Class II
T.MOD_SOFT Class II Class I/II Class I Class I Class I Class I
T.MOD_DSOFT Class II Class I/II Class I Class I Class I Class I
T.MOD_DESIGN Class II Class I/II Class I Class I Class I Class I
T.MOD_PHOTOMASK Class II Class II
AT90SC9604RU Security Target Lite
30 of 70 General Business Use (13 Feb 07)
TPG0142A
3.4 Organizational Security Policies
87 An organizational security policy is mandatory for the smartcard product usage. The
specifications of organizational security policies essentially depend on the applications
in which the TOE is incorporated.
88 However, it was found relevant to address the following organizational security policy
with the TOE because most of the actual Smart Card secure applications make use of
cryptographic standards.
P.CRYPTO Cryptographic entities, data authentication, and approval
functions must be in accordance with ISO, associated
industry, or organizational standards or requirements.
Various cryptographic algorithms and mechanisms, such as
triple DES, AES, RSA, MACs, Elliptic Curves, and Digital
Signatures, are accepted international standards. These, or
others in accordance with industry or organizational
standards of similar maturity and definition, should be used
for all cryptographic operations in the TOE.
These cryptographic operations are used for instance to
support establishment and control of a trusted channel
between the TOE and the outside environment.
To support these cryptographic functions, the TOE should
supply Random Number Generation (RNG) with sufficient
unpredictability and entropy. The TOE shall ensure that no
information about the produced random numbers is
available to an attacker since they might be used for
instance to generate cryptographic keys.
Security Objectives
(13 Feb 07) General Business Use 31 of 70
TPG0142A
Section 4
Security Objectives
89 The security objectives of the TOE cover principally the following aspects:
! Integrity and confidentiality of assets
! Protection of the TOE and associated documentation during development and
production phases
4.1 Security Objectives for the TOE
90 The TOE shall use state of art technology to achieve the following IT security
objectives:
O.TAMPER The TOE must prevent physical tampering with its
security critical parts.
The TOE must provide protection against disclosure of User
data, against disclosure/reconstruction of the Smartcard
Embedded Software or against disclosure of other critical
operational information.
This includes protection against direct micro-probing of
signals not connected to bonding pads, but also other
contact or contactless probing techniques such as laser
probing or electromagnetic sensing. Most of these
techniques require a prior reverse engineering of parts of
the device to understand its architecture and its security
functions.
This also includes protection against inherent information
leakage (for example shape of signals, power consumption,
electromagnetic emissions) on the device external
interfaces (for example clock, supply, I/O lines, and chip
physical surfaces) that could be used to disclose
confidential data, as well as forced information leakage
caused by induced malfunction or physical manipulation
AT90SC9604RU Security Target Lite
32 of 70 General Business Use (13 Feb 07)
TPG0142A
O.CLON The TOE functionality needs to be protected from
cloning.
The TOE must include means to prevent an attacker from
reproducing the smartcard functionality. Most of these
techniques require a prior reverse engineering of parts of
the device to understand its architecture and its security
functions.
O.OPERATE The TOE must ensure the continued correct operation
of its security functions.
The TOE must include protection against the use of stolen
silicon samples or products that would ease an attacker
gaining fraudulous access to the smartcard system.
The TOE must also provide mechanisms to avoid the
unauthorized modification of the security functions or
software and data, by using the device test commands for
instance, or by using uncontrolled/unauthentified software
access to memories.
The TOE must prevent its operation outside the normal
operating conditions where reliability and secure operation
has not been proven or tested. This is to prevent errors. The
environmental conditions may include voltage, clock
frequency, temperature, or external energy fields
O.FLAW The TOE must not contain flaws in design,
implementation or operation.
The TOE design must include protection against
modification of its security mechanisms (for example
detectors or memory protections) that would lead to bypass
or reduce their integrity, and therefore open security holes
that could be used to access embedded software and data.
The TOE design must also provide protection against
modification of its embedded software that would lead to
bypass or reduce the integrity of some software controlled
security mechanisms (for example memory areas
definition), and therefore open security holes that could be
used to access embedded software and data.
O.DIS_MECHANISM The TOE shall ensure that the hardware security
mechanisms are protected against unauthorized
disclosure.
Security Objectives
(13 Feb 07) General Business Use 33 of 70
TPG0142A
The TOE must be designed and fabricated so that it requires
a high combination of complex equipment, knowledge, skill
and time to derive detailed designed information or other
information which could be used to compromise security
through physical attacks.
AT90SC9604RU Security Target Lite
34 of 70 General Business Use (13 Feb 07)
TPG0142A
O.DIS_MEMORY The TOE shall ensure that sensitive information stored
in memories is protected against unauthorized access.
The TOE must provide protection against unauthorized
access to embedded software and data stored in memories,
either using test commands, or by some embedded
software (for instance a non-supervisor user application)
that would try to dump the memories protected by the
Firewall programmation (for instance the supervisor
program and/or data), or even by some physical attacks.
O.MOD_MEMORY The TOE shall ensure that sensitive information stored
in memories is protected against any corruption or
unauthorized modification.
The TOE must provide protection against unauthorized
access to embedded software and data stored in memories,
either using test commands, or by some embedded
software (for instance a non-supervisor user application)
that would try to modify the memories protected by the
Firewall programmation (for instance the supervisor
program and/or data), or even by some physical attacks.
O.CRYPTO Cryptographic capability shall be available for users to
maintain integrity and confidentiality of sensitive data.
The TOE must provide hardware and/or software
implementation of some cryptographic algorithms that can
be used by the embedded software in conjunction with
appropriate counter-measure to achieve cryptographic
operations (for instance encryption, decryption, integrity
checking, signature, key generation, for algorithms such as
DES, TDES,...).
These cryptographic operations are used for instance to
support establishment and control of a trusted channel
between the TOE and the outside environment, or protect
confidential data stored in the TOE memories.
The TOE must also provide random number generation and
ensure the cryptographic quality of random number
generation. For example, random numbers shall not be
predictable and shall have a sufficient entropy.
The TOE must ensure that no information about the
produced random numbers is available to an attacker since
they might be used for instance to generate cryptographic
keys.
(13 Feb 07) General Business Use 35 of 70
TPG0142A
4.2 Security Objectives for the Environment
4.2.1 Objectives on Phase 1
O.DEV_DIS The smartcard IC designer must have procedures to control
the sales, distribution, storage and usage of the software and
hardware development tools and classified documents,
suitable to maintain the integrity and the confidentiality of the
assets of the TOE.
It must be ensured that:
! Tools are only delivered to the parties authorized
personnel.
! Confidential information such as data sheets and
general information on defined assets are only delivered
to the parties authorized personnel on the basis of
need-to-know.
O.SOFT_DLV The smartcard embedded software must be delivered from
the smartcard embedded software developer (Phase 1) to
the IC designer through a trusted delivery and verification
procedure that shall be able to maintain the integrity of the
software and its confidentiality, if applicable.
O.SOFT_MECH To achieve the level of security required by this Security
Target Lite, the smartcard embedded software shall use IC
security features and security mechanisms (for example,
sensors) as specified in the smartcard IC documentation
[TD].
O.DEV_TOOLS The smartcard embedded software shall be designed in a
secure manner, by using exclusively software development
tools (compilers, assemblers, linkers, simulators etc.) and
software-hardware integration testing tools (emulators) that
will grant the integrity of program and data.
AT90SC9604RU Security Target Lite
36 of 70 General Business Use (13 Feb 07)
TPG0142A
4.2.2 Objectives on Phase 2 (Development Phase)
O.SOFT_ACS Embedded software shall be accessible only by authorized
personnel within the IC designer on the basis of
need-to-know.
O.DESIGN_ACS IC specifications, detailed design, IC databases,
schematics/layout or any further design information shall be
accessible only by authorized personnel within the IC
designer on the basis of need-to-know (physical, personnel,
organizational, technical procedures).
O.DSOFT_ACS Any IC dedicated software specification, detailed design,
source code or any further information shall be accessible
only by authorized personnel within the IC designer on the
basis of need-to-know.
O.MASK_FAB Physical, personnel, organizational, technical procedures
during photomask fabrication (including deliveries between
photomasks manufacturer and IC manufacturer) shall
ensure the integrity and confidentiality of the TOE.
O.MECH_ACS Details of hardware security mechanisms shall be
accessible only by authorized personnel within the IC
designer on the basis of need-to-know.
O.TI_ACS Security relevant technology information shall be accessible
only by authorized personnel within the IC designer on the
basis of need-to-know.
Security Objectives
(13 Feb 07) General Business Use 37 of 70
TPG0142A
4.2.3 Objectives on Phase 3 (Manufacturing Phase)
O.TOE_PRT The manufacturing process shall ensure that protection of
the TOE from any kind of unauthorized use such as
tampering or theft.
During the IC manufacturing and test operations, security
procedures shall ensure the confidentiality and integrity of:
! TOE manufacturing data (to prevent any possible copy,
modification, retention, theft or unauthorized use).
! TOE security relevant test programs, test data,
databases and specific analysis methods and tools.
These procedures shall define a security system applicable
during the manufacturing and test operations to maintain
confidentiality and integrity of the TOE by control of:
! Packaging and storage.
! Traceability.
! Storage and protection of manufacturing process
specific assets (such as manufacturing process
documentation, further data, or samples)
! Access control and audit to tests, analysis tools,
laboratories, and databases.
! Change/modification in the manufacturing equipment,
management of rejects.
O.IC_DLV The delivery procedures from the IC manufacturer shall
maintain the integrity and confidentiality of the TOE and its
assets.
AT90SC9604RU Security Target Lite
38 of 70 General Business Use (13 Feb 07)
TPG0142A
4.2.4 Objectives on the TOE Delivery Process (Phases 4 to 7)
4.2.5 Objectives on Phase 4 to 6
O.DLV_PROTECT Procedures shall ensure protection of TOE material
(including sawn and unsawn wafers) and information under
delivery, including the following objectives:
! Non-disclosure of any security relevant information.
! Identification of the elements under delivery.
! Meet confidentiality rules (confidentiality level,
transmittal form, reception acknowledgement).
! Physical protection to prevent external damage.
! Secure storage and handling procedures are
applicable for all TOEs (including rejected TOEs).
! Traceability of TOE during delivery including the
following parameters:
! Origin and shipment details.
! Reception, reception acknowledgement.
! Location material and information.
O.DLV_AUDIT Procedures shall ensure that corrective actions are taken in
the event of improper operation in the delivery process
(including, if applicable any non-conformance to the
confidentiality convention) and highlight all non
conformance to this process.
O.DLV_RESP Procedures shall ensure that people (shipping department,
carrier, reception department) dealing with the procedure for
delivery get the required skill, training and knowledge to
meet the procedure requirements, and to act in full
accordance with the above expectations.
O.TEST_OPERATE Appropriate functionality testing of the IC shall be used in
phases 4 to 6.
During all manufacturing and test operations, security
procedures shall be used through phases 4, 5, 6, to maintain
confidentiality and integrity of the TOE and of its
manufacturing and test data. This applies to both sawn and
unsawn wafers.
Security Objectives
(13 Feb 07) General Business Use 39 of 70
TPG0142A
4.2.6 Objectives on Phase 7
O.USE_DIAG Secure communication protocols and procedures shall be
used between smartcard and terminal.
O.USE_SYS The integrity and the confidentiality of sensitive data stored
or handled by the system (terminals, communications....)
shall be maintained.
AT90SC9604RU Security Target Lite
40 of 70 General Business Use (13 Feb 07)
TPG0142A
TOE Security Functional Requirements
(13 Feb 07) General Business Use 41 of 70
TPG0142A
Section 5
TOE Security Functional Requirements
91 The TOE security functional requirements define the functional requirements for the
TOE using only functional requirements components drawn from the Common Criteria
part 2.
92 The minimum strength of function level for the TOE security requirements is SOF-high.
5.1 Functional Requirements Applicable to Phase 3 Only
(Testing Phase)
5.1.1 User Authentication Before any Action (FIA_UAU.2)
93 The TOE security functions shall require each user to be successfully authenticated
before allowing any other TOE security functions-mediated actions on behalf of that
user.
5.1.2 User Identification Before any Action (FIA_UID.2)
94 The TOE security functions shall require each user to identify itself before allowing any
other TOE security functions mediated actions on behalf of that user.
5.1.3 User Attribute Definition (FIA_ATD.1)
95 The TOE security functions shall maintain the following list of security attributes
belonging to individual users:
! Test mode access right
! Read AVR ROM access right
! Write AVR ROM access right
! Execute AVR ROM access right
! Read EEPROM access right
! Write EEPROM access right
! Execute EEPROM access right
! Read RAM access right
! Write RAM access right
AT90SC9604RU Security Target Lite
42 of 70 General Business Use (13 Feb 07)
TPG0142A
! Execute RAM access right
! Read access right to peripherals and IO registers
! Write access right to peripherals and IO registers
! Execute access right to peripherals and IO registers
5.1.4 TOE Security Functions Testing (FPT_TST.1)
96 The TOE security functions shall:
! Run a suite of self tests at the request of the authorized user to demonstrate the
correct operation of the TOE security functions.
! Provide authorized users with the capability to verify the integrity of TOE security
functions data.
! Provide authorized users with the capability to verify the integrity of stored TOE
security functions executable code.
5.1.5 Stored Data Integrity Monitoring (FDP_SDI.1)
97 The TOE security functions shall monitor user data stored within the TOE scope of
control for integrity errors on all objects, based on the following attributes:
! Test signatures from AVR ROM
! Test signatures from, and contents of, RAM
! Contents of EEPROM
(13 Feb 07) General Business Use 43 of 70
TPG0142A
5.2 Functional Requirements Applicable to Phases 3 to 7
5.2.1 Management of Security Functions Behaviour (FMT_MOF.1)
98 The TOE security functions shall restrict the ability to enable the functions available in
Test Mode to the Test Mode Entry (TME) administrator.
99 The TOE security functions shall restrict the ability to disable the functions available in
Test Mode to the Test Mode Entry (TME) administrator.
5.2.2 Management of Security Attributes (FMT_MSA.1)
100 The TOE security functions shall enforce the ACSF_Policy (Access Control Security
Functions Policy) and IFCSF_Policy (Information Flow Control Security Functions
Policy) to restrict the ability to access the security attributes to, TME administrator,
Supervisor and Non-supervisor:
5.2.3 Security Roles (FMT_SMR.1)
101 The TOE security functions shall maintain the role of:
! TME administrator
! Supervisor
! Non-supervisor
! PME administrator
102 The TOE security functions shall be able to associate users with roles.
5.2.4 Specification of Management Functions (FMT_SMF.1)
103 The TOE security functions shall be capable of performing the following security
management functions:
! Control entry into and disabling of test mode and entry into user mode and
package mode.
! Define the 3 user modes, (Supervisor, Non-supervisor) address space
parameters. Which controls the software access between each program user
regions, but also between the program user and the data user regions.
5.2.5 Static Attribute Initialization (FMT_MSA.3)
104 The TOE security functions shall:
AT90SC9604RU Security Target Lite
44 of 70 General Business Use (13 Feb 07)
TPG0142A
! Enforce the ACSF_Policy and IFCSF_Policy to provide restrictive default values
for security attributes that are used to enforce the security functions policy
! Allow the TME administrator to specify alternate initial values to override the
default values when an object or information is created
5.2.6 Complete Access Control (FDP_ACC.2)
105 The TOE security functions shall enforce the ACSF_Policy (Not disclosed in ST Lite)
on:
! TME administrator, Supervisor, Non-supervisor, PME administrator.
! AVR ROM, EEPROM, RAM, peripheral and IO registers.
! And all operations among subjects and objects covered by the security functions
policy.
106 The TOE security functions shall ensure that all operations between any subject in the
TOE scope of control and any object within the TOE scope of control are covered by an
access control security functions policy.
5.2.7 Security Attribute Based Access Control (FDP_ACF.1)
107 The TOE security functions shall enforce the ACSF_Policy to objects based on:
! Read AVR ROM access right
! Write AVR ROM access right
! Execute AVR ROM access right
! Read EEPROM access right
! Write EEPROM access right
! Execute EEPROM access right
! Read RAM Data space access right
! Write RAM Data space access right
! Execute RAM Data space access right
! Read AVR EEPROM Data space access right
! Write AVR EEPROM Data space access right
! Execute AVR EEPROM Data space access right
! Read peripheral and IO registers access right
! Write peripheral and IO registers access right
! Execute peripheral and IO registers access right
108 The TOE security functions shall enforce the following rules to determine if an operation
among controlled subjects and controlled objects is allowed.
109 Firewall rules, are not disclosed in the ST Lite
TOE Security Functional Requirements
(13 Feb 07) General Business Use 45 of 70
TPG0142A
5.2.8 Subset Information Flow Control (FDP_IFC.1)
110 The TOE security functions shall enforce the IFCSF_Policy on TME administrator and
PME administrator, test commands and test operations that cause controlled
information to flow between the:
! AVR ROM and the Test Mode Entry administrator
! EEPROM and the Test Mode Entry administrator
! EEPROM and the Package Mode Entry administrator
! RAM and the Test Mode Entry administrator
! Peripheral and IO registers and the Test Mode Entry administrator
5.2.9 Simple Security Attributes (FDP_IFF.1)
111 The TOE security functions shall enforce the IFCSF_Policy based on the following
types of subject and information security attributes: test command syntax.
112 The TOE security functions shall:
! Permit an information flow between a controlled subject and controlled information
via a controlled operation if the following rules hold: test command syntax rules.
! Enforce no additional information flow control security functions policy rules.
! Provide no additional security functions policy capabilities.
113 The TOE security functions shall explicitly authorize an information flow based on the
following rules:
114 Test command syntax rules, based on test command syntax, that explicitly authorize
information flows between TME administrator and:
! AVR ROM
! EEPROM
! RAM
! Peripheral and IO registers
Note
All information about possible data flow and Test command syntax can be found in
[STI], [TMR-USER], [TestROMUG], [TestROMDD] and [TMRE2]
AT90SC9604RU Security Target Lite
46 of 70 General Business Use (13 Feb 07)
TPG0142A
115 Test command syntax rules, based on test command syntax, that explicitly authorize
information flows between PME administrator and:
! EEPROM
116 The TOE security functions shall explicitly deny an information flow based on the
following rules:
117 Test command syntax rules, based on test command syntax, that explicitly deny
information flows between TME administrator and:
! AVR ROM
! EEPROM
! RAM
! Peripheral and IO registers
118 Test command syntax rules, based on test command syntax, that explicitly deny
information flows between PME administrator and:
! AVR ROM
! EEPROM
! RAM
! Peripheral and IO registers
Note
All information about possible data flow and Test command syntax can be found in
[STI], [PME]
Note
All information about possible data flow and Test command syntax can be found in
[STI], [TMR-USER]
Note
All information about possible data flow and Test command syntax can be
found in [STI], [PME]
TOE Security Functional Requirements
(13 Feb 07) General Business Use 47 of 70
TPG0142A
IFCSF_Policy
5.2.10 Potential Violation Analysis (FAU_SAA.1)
119 The TOE Security Functions shall be able to apply a set of rules in monitoring the
audited events and based upon these rules indicate a potential violation of the TOE
Security Policy.
120 The TOE security functions shall enforce the following rules for monitoring audited
events:
a) Accumulation or combination of abnormal environmental conditions (Supply
voltage, clock input frequency, temperature, UV light) known to indicate a potential
security violation.
b) Accumulation or combination of physical tampering (Micro-probing, critical FIB
modification) known to indicate a potential security violation.
c) Accumulation or combination of Firewall violations (user trying to illegally access
controlled memories or objects, user trying to execute illegal opcodes) known to
indicate a potential security violation.
d) Accumulation of watchdog violations known to indicate a potential security
violation.
e) No other rules.
5.2.11 Unobservability (FPR_UNO.1)
121 The TOE security functions shall ensure that any users are unable to observe the
operations that are critical (i.e. read, write and erase), on assets protected in terms of
confidentiality by authorized users or subjects.
5.2.12 Notification of Physical Attack (FPT_PHP.2)
122 The TOE security functions shall:
Table 5-1 IFCSF_Policy
Rules Test command syntax rules
Attribute Test command syntax
TME Administrator Data flow (1)
PME Administrator Data flow (2)
(1)
All information about possible data flow and Test command
syntax can be found in [STI], [TMR-USER]
(2)
All information about possible data flow and Test command
syntax can be found in [STI], [PME].
AT90SC9604RU Security Target Lite
48 of 70 General Business Use (13 Feb 07)
TPG0142A
! Provide unambiguous detection of physical tampering that might compromise the
TOE security functions.
! Provide the capability to determine whether physical tampering with the TOE
security functions’s devices or TOE security functions’s elements has occurred.
123 For values of voltage, clock input frequency, temperature and UV light which go outside
acceptable bounds, for micro-probing and critical FIB modification, for Firewall rules
violations (including illegal opcodes), and for watchdog violations, the TOE security
functions shall monitor the devices and elements and notify the supervisor when
physical tampering with the TOE security functions’ devices or TOE security functions’
elements has occurred.
5.2.13 Resistance to Physical Attack (FPT_PHP.3)
124 The TOE security functions shall resist tampering of voltage, clock input frequency,
temperature, UV light, micro-probing, critical FIB modification, Firewall rules violations
(including illegal opcodes), and watchdog violations to the TOE and its security
functions by responding automatically such that the TOE security policy is not violated.
5.2.14 Cryptographic Operation (FCS_COP.1)
125 The TSF shall perform hardware data encryption and decryption in accordance with
the:
! DES cryptographic algorithm using 56-bit cryptographic key sizes that meets the
Data Encryption Standard (DES), FIPS PUB 46-3, 25th October, 1999.
! Triple Data Encryption Standard (TDES) cryptographic algorithm using 112-bit
cryptographic key sizes that meets the E-D-E two-key triple-encryption
implementation of the Data Encryption Standard, FIPS PUB 46-3, 25th October,
1999.
TOE Security Functional Requirements
(13 Feb 07) General Business Use 49 of 70
TPG0142A
5.3 Functional Requirements Applicable to PMT in Phase 4 to 7
Only
5.3.1 User Authentication Before any Action (FIA_UAU.2)
126 The TOE security functions shall require each user to be successfully authenticated
before allowing any other TOE security functions-mediated actions on behalf of that
user.
5.3.2 User Identification Before any Action (FIA_UID.2)
127 The TOE security functions shall require each user to identify itself before allowing any
other TOE security functions mediated actions on behalf of that user.
5.3.3 User Attribute Definition (FIA_ATD.1)
128 The TOE security functions shall maintain the following list of security attributes
belonging to PMT users:
! Package mode access right
! Limited write EEPROM access right
! Limited read EEPROM access right
! EEPROM internal signal access (charge pump and margin)
! ISO clock access right
! Clock selection right
129 The write to EEPROM access is limited to the following:
! Full erase and program
! Chip erase and program
! Page mode write*
130 The read from EEPROM access is limited to the following
! Page mode read
Note
For page mode writes, the data to write is restricted to the following fixed
values: Not disclosed in the ST Lite
AT90SC9604RU Security Target Lite
50 of 70 General Business Use (13 Feb 07)
TPG0142A
5.4 TOE Security Assurance Requirements
131 The assurance requirement is EAL4 augmented of additional assurance components
listed in the following sections.
132 Some of these components are hierarchical ones to the components specified in EAL4.
133 All the components are drawn from Common Criteria Part 3, V2.2.
5.4.1 ADV_IMP.2 Implementation of the TSF
Developer actions elements
134 The developer shall provide the implementation representation for the entire TOE
security functions.
Content and presentation of evidence elements
135 The implementation representation shall:
! Unambiguously define the TOE security functions to a level of detail such that the
TOE security functions can be generated without further design decisions
! Be internally consistent
! Describe the relationships between all portions of the implementation
Evaluator actions elements
136 The evaluator shall:
! Confirm that the information provided meets all requirements for content and
presentation of evidence.
! Determine that the implementation representation is an accurate and complete
instantiation of the TOE security functional requirements.
5.4.2 ALC_DVS.2 Sufficiency of Security Measures
Developer actions elements
137 The developer shall produce development security documentation.
Content and presentation of evidence elements
138 The development security documentation shall:
TOE Security Functional Requirements
(13 Feb 07) General Business Use 51 of 70
TPG0142A
! Describe all the physical, procedural, personnel, and other security measures that
are necessary to protect the confidentiality and integrity of the TOE design and
implementation in its development environment.
! Provide evidence that these security measures are followed during the
development and maintenance of the TOE.
139 The evidence shall justify that the security measures provide the necessary level of
protection to maintain the confidentiality and integrity of the TOE.
Evaluator actions elements
140 The evaluator shall confirm that the:
! Information provided meets all requirements for content and presentation of
evidence
! Security measures are being applied
5.4.3 AVA_VLA.4 Highly Resistant
Developer actions elements
141 The developer shall:
! Perform a vulnerability analysis.
! Provide vulnerability analysis documentation.
Content and presentation of evidence elements
142 The documentation shall:
! Describe the analysis of the TOE deliverables performed to search for ways in
which a user can violate the TSP.
! Describe the disposition of identified vulnerabilities.
! Show, for all identified vulnerabilities, that the vulnerability cannot be exploited in
the intended environment for the TOE.
! Justify that the TOE, with the identified vulnerabilities, is resistant to obvious
penetration attacks.
! Show that the search for vulnerabilities is systematic.
! Provide a justification that the analysis completely addresses the TOE
deliverables.
Evaluator actions elements
143 The evaluator shall:
AT90SC9604RU Security Target Lite
52 of 70 General Business Use (13 Feb 07)
TPG0142A
! Confirm that the information provided meets all requirements for content and
presentation of evidence
! Conduct penetration testing, building on the developer vulnerability analysis, to
ensure the identified vulnerabilities have been addressed.
! Perform independent vulnerability analysis
! Perform independent penetration testing, based on the independent vulnerability
analysis, to determine the exploitability of additional identified vulnerabilities in the
intended environment.
! Determine that the TOE is resistant to penetration attacks performed by an
attacker possessing a high attack potential.
5.4.4 AVA_MSU.3 Analysis and Testing for Insecure States
Developer action elements
! Shall provide guidance documents
! Document an analysis of the guidance documentation.
Content and presentation of evidence elements
! Guidance documents shall identify all/possible modes of operation of the TOE
(including operation failure or operational error), their consequences and
implications for maintaining secure operation.
! Guidance documentation shall be complete, clear, consistent and reasonable.
! Guidance documentation shall list all assumptions about the intended
environment.
! Guidance documentation shall list all requirements for external security measures
(including external procedural, physical and personnel controls)
! The analysis documentation shall demonstrate documentation is complete.
Evaluator action elements
! Shall confirm that the information provided meets all requirements for content and
presentation of evidence
! Shall repeat all configuration and installation procedures, and other procedures
selectively, to confirm that the TOE can be configured and used securely using
only the supplied guidance documentation.
! Shall determine that the use of the guidance documentation allows all insecure
states to be detected.
! Shall confirm that the analysis documentation shows that guidance is provided for
secure operation in all modes of operation of the TOE.
! Shall perform independent testing to determine that an administrator or user, with
an understanding of the guidance documentation, would reasonably be able to
determine if the TOE is configured and operating in a manner that is insecure.
TOE Summary Specification
(13 Feb 07) General Business Use 53 of 70
TPG0142A
Section 6
TOE Summary Specification
144 This section defines the TOE security functions, and Figure 6-1 on page 59 specifies
how they satisfy the TOE security functional requirements.
6.1 TOE Security Functions
6.1.1 Test Mode Entry (SF1)
145 SF1 shall ensure that only authorized users will be permitted to enter Test Mode. This
is provided by Test Mode Entry conditions that are required to enable the TOE to enter
Test Mode.
146 All test entry requirements occur while the TOE is held in reset and failure in any one
will prevent Test Mode Entry. It is required that the TOE satisfies the test entry
conditions during any internal reset condition.
147 It is not possible to move from User Mode to Test Mode. Any attempt to do this, for
example, by forcing internal nodes will be detected and the security functions will
disable the ability to enter Test Mode.
148 The Strength of Function claimed for the Test Mode Entry security function is high.
AT90SC9604RU Security Target Lite
54 of 70 General Business Use (13 Feb 07)
TPG0142A
6.1.2 Protected Test Memory Access (SF2)
149 SF2 shall ensure that, although authenticated users can have access to memories
using commands in test mode, they cannot access directly their contents.
150 Only authorized Test engineers running tests on the TOE have access to TME
conditions
151 Authorized Test Mode users also have access to other address regions which are not
accessible in user mode.
152 The Strength of Function claimed for the Protected Test Memory Access security
function is high.
6.1.3 Test Mode Disable (SF3)
153 SF3 shall make provision for:
! Wafer sawing which, once done, shall ensure that none of the test features are
available, not even to authenticated users in test mode. Although Package Mode
Entry (PME) is now available.
TOE Summary Specification
(13 Feb 07) General Business Use 55 of 70
TPG0142A
6.1.4 TOE Testing (SF4)
154 SF4 shall provide embedded hardware test circuitry with high fault coverage to prevent
faulty devices being released in the field. Devices with manufacturing problems (short
circuits, open nets,...) could lead to a poor level of security by disabling some security
functions.
155 To conform with ISO 7816 standards the TOE embedded software will always return an
Answer-To-Reset command via the serial I/O port. This contains messages with
information on the integrity and identification of the device. An ATR also verifies
significant portions of device hardware (CPU, ROM, EEPROM and logic).
6.1.5 Data Error Detection (SF5)
156 SF5 shall provide means for performing data error detection.
157 Means of performing checksum error detection and parity error detection is provided.
The 16/32-bit Checksum Accelerator or the CRC-16/32 hardware peripheral can be
used by the embedded software to compute fast data error detection on the program
and/or data memories before starting any operation.
Note
A authorized Test Mode administrator through the STI_BURST_ROM_READ
command has access to scrambled contents of the AVR ROM.
AT90SC9604RU Security Target Lite
56 of 70 General Business Use (13 Feb 07)
TPG0142A
6.1.6 FireWall (SF6)
158 SF6 shall enforce access control based on the FireWall rules as defined in the
ACSF_Policy (Not defined in this ST-Lite).
Memory protection
159 The FireWall defines three modes to execute embedded software:
! Supervisor
! Non-supervisor mode .
160 The different modes provide restricted access priveledges to the memories and to the
MCU peripheral registers.
161 If a protected address is accessed by the non-supervisor software, a security interrupt
is invoked.
Illegal address
162 If an illegal address is accessed, a security interrupt is invoked.
Illegal opcode
163 If an attempt is made to execute any opcode that is not implemented in the instruction
set, a security non maskable interrupt is invoked.
6.1.7 Event Audit (SF7)
164 The TOE shall provide an Event Audit security function (SF7) to enforce the following
rules for monitoring audited events.
165 Accumulation or combination of the following auditable events would indicate a
potential security violation.
1. The external voltage supply goes outside acceptable bounds
2. The external clock signal goes outside acceptable bounds
3. The ambient temperature goes outside acceptable bounds
4. Application program abnormal runaway
5. Attempts to physically probe the device
6. Attempts to gain illegal access to reserved RAM memory locations
7. Attempts to gain illegal access to reserved EEPROM memory locations
8. Attempts to gain illegal access to reserved peripheral, IO register locations:
TOE Summary Specification
(13 Feb 07) General Business Use 57 of 70
TPG0142A
9. Attempts to execute illegal instruction “LPM” to read the program memory from the
non-supervisor program location
10. Attempts to move the RAM stack to an illegal RAM memory location
11. Attempts to execute an AVR opcode that is not implemented
12. Attempts to illegally write access the device’s EEPROM
13. Attempts to gain illegal access to Supervisor modes
14. Exposure to UV light goes outside acceptable bounds
15. The Strength of Function claimed for the Event audit security function is high.
6.1.8 Event Action (SF8)
166 SF8 shall provide an Event Action security function to register occurrences of audited
events and take appropriate action. Detection of such occurrences will cause an
information flag to be set, and may cause one of the following to occur if warranted by
the violation:
! Memory wiping actions
! Different levels of immediate reset
! Different levels of security interupts
167 Event Action depends on the type of Event (see [TD] for more information).
AT90SC9604RU Security Target Lite
58 of 70 General Business Use (13 Feb 07)
TPG0142A
6.1.9 Unobservability (SF9)
168 SF9 shall ensure that users/third parties will have difficulty observing the following
operations on the TOE by the described means.
1. Extract information relating to any specific resource or service being used
by:Monitoring power consumption.
2. Extract information relating to any specific resource or service being used by:
Carrying out timing analysis on Crypto Functions.
3. Extract information relating to any specific resource or service being used
by:Using mechanical, electrical or optical means.
169 The Strength of Function claimed for the Unobservability security function is high.
6.1.10 Cryptography (SF10)
170 The TSF shall provide:
! A cryptographic algorithm to be able to transmit and receive objects in a manner
protected from data retrieval or modification.
! M10.1 Hardware DES, TDES data encryption/decryption capability.
171 Those may be used by the smartcard embedded software to support data encryption
and decryption for maintaining data integrity, and protect against sensitive data
unauthorized disclosure.
172 The Strength of Function claimed for the cryptography security function is high.
173 The TSF shall provide a hardware Random Number Generator (RNG) to support
security operations performed by cryptographic applications. This RNG shall not be
predictable, have sufficient entropy, and not leaking information related to the value of
the generated random numbers as this leakage could be used to retrieve cryptographic
keys for instance.
174 An assessment of the strength of the following algorithms does not form part of the
evaluation:
! DES algorithm
! TDES algorithm
6.1.11 Package Mode Entry (SF11)
175 SF11 shall ensure only authorized users will be permitted to enter Package Mode. This
is provided by the Test Mode Entry conditions, and also the Package Mode Entry
conditions. Both these conditions must be met to enter Package Mode.
TOE Summary Specification
(13 Feb 07) General Business Use 59 of 70
TPG0142A
176 The conditions must be met in SF1 first, then whilst the TOE is still held in reset the PME
conditions must be met. Failure to meet these conditions will prevent entry into Package
Mode.
177 Therefore to enter Package Mode the conditions for Test Mode entry must be met, then
further conditions relating to Package Mode must be met. Failure to satisfy will prevent
entry into Package Mode [PME] details the entry conditions.
178 Package mode can only be entered on sawn wafers, that is wafers that have met the
SF3 conditions.
179 The Strength of Function for the Package Mode Entry function is high.
6.1.12 Test Memory Access in Package Mode (SF12)
180 SF12 shall ensure that, although authenticated users can have access to memories
using commands in package mode, they cannot access directly their contents.
181 When package mode is entered a full EEPROM erase is performed. Access to the
device memories are limited by test algorithms.
182 Only authorized test engineers running tests on the TOE will have access to the PME
conditions.
183 The Strength of Function claimed for the Protected Test Memory Access in Package
Mode is high.
6.1.13 Security Functions Based on Permutations/combinations
184 Not disclosed in ST Lite
Table 6-1 Relationship Between Security Requirements and Security Functions
Security Functions
Test
Mode
Entry
Protected
Test
Memory
Access
Test
Mode
Disable
TOE
Testing
Data
Error
Detection
FireWall
Event
Audit
Event
Action
Unobservability
Cryptography
Package
Mode
Entry
Test
Memory
Access
in
Package
Mode
AT90SC9604RU Security Target Lite
60 of 70 General Business Use (13 Feb 07)
TPG0142A
6.2 TOE Assurance Measures
185 This section defines the TOE assurance measures and Figure 6-2 on page 63 specifies
how they satisfy the TOE security assurance requirements.
6.2.1 Security Target (SA1)
186 SA1 shall provide the “AT90SC9604RU Security Target Lite” document plus its
references.
Security
Requirement
SF1
SF2
SF3
SF4
SF5
SF6
SF7
SF8
SF9
SF10
SF11
SF12
FIA_UAU.2 O1 x x
FIA_UID.2 O2 x x
FIA_ATD.1 O3 x x x x x
FPT_TST.1 O4 x x x x x
FDP_SDI.1 O5 x x
FMT_MOF.1 O6 x x
FMT_MSA.1 O7 x x x x x x
FMT_SMR.1 O8 x x x x
FMT_SMF.1 O9 x x x x
FMT_MSA.3 10
x x x
FDP_ACC.2 O11 x x x x x x
FDP_ACF.1 O12 x x x x x x
FDP_IFC.1 O13 x x x x x x
FDP_IFF.1 O14 x x x x x x
FAU_SAA.1 O15 x
FPR_UNO.1 O16 x
FPT_PHP.2 O17 x x
FPT_PHP.3 O18 x x x
FCS_COP.1 O19 x
Table 6-1 Relationship Between Security Requirements and Security Functions (Continued)
TOE Summary Specification
(13 Feb 07) General Business Use 61 of 70
TPG0142A
6.2.2 Configuration Management (SA2)
187 SA2 shall provide the “CC Configuration Management (ACM)” interface document plus
its references.
6.2.3 Delivery and Operation (SA3)
188 SA3 shall provide the “CC Delivery and Operation (ADO)” interface document plus its
references.
6.2.4 Development Activity (SA4)
189 SA4 shall provide the “CC Development Activity (ADV)” interface document plus its
references.
6.2.5 Guidance (SA5)
190 SA5 shall provide the “CC Guidance (AGD)” interface document plus its references.
6.2.6 Life Cycle Support (SA6)
191 SA6 shall provide the “CC Life Cycle Support (ALC)” interface document plus its
references.
6.2.7 Test Activity (SA7)
192 SA7 shall provide the “CC Test Activity (ATE)” interface document plus its references,
and undertaking of testing described therein.
6.2.8 Vulnerability Assessment (SA8)
193 SA8 shall provide the “CC Vulnerability Assessment (AVA)” interface document plus its
references, and undertaking of vulnerability assessment described therein.
6.2.9 Smart Card Devices (SA9)
194 SA9 shall provide functional AT90SC9604RU smart card devices.
6.2.10 Development Site (SA10)
195 SA10 shall provide access to the development site.
AT90SC9604RU Security Target Lite
62 of 70 General Business Use (13 Feb 07)
TPG0142A
6.2.11 Test Site (SA11)
196 SA11 shall provide access to the test site.
6.2.12 Manufacturing Site (SA12)
197 SA12 shall provide access to the manufacturing site.
6.2.13 Sub-contractor Sites (SA13)
198 SA13 shall provide access to the sub-contractor sites.
TOE Summary Specification
(13 Feb 07) General Business Use 63 of 70
TPG0142A
Table 6-2 Relationship Between Assurance Requirements and Measures
Security
Target
Lite
Configuration
Management
Delivery
and
Operation
Development
Activity
Guidance
Life
Cycle
Support
Test
Activity
Vulnerability
assessment
Smartcard
Devices
Development
Site
Test
Site
Manufacturing
Site
Sub-contractor
Site
Assurance
Requirement
SA1
SA2
SA3
SA4
SA5
SA6
SA7
SA8
SA9
SA10
SA11
SA12
SA13
ASE_xxx x
ACM_AUT.1 x x x x x
ACM_CAP.4 x x x x x
ACM_SCP.2 x x x x x
ADO_DEL.2 x x x x x
ADO_IGS.1 x x x x x
ADV_FSP.2 x
ADV_HLD.2 x
ADV_IMP.2 x
ADV_LLD.1 x
ADV_RCR.1 x
ADV_SPM.1 x
AGD_ADM.1 x
AGD_USR.1 x
ALC_DVS.2 x x x x x
ALC_LCD.1 x x x x x
ALC_TAT.1 x x x x x
ATE_COV.2 x x x
ATE_DPT.1 x x x
ATE_FUN.1 x x x
ATE_IND.2 x x x
AVA_MSU.3 x x
AVA_SOF.1 x x
AVA_VLA.4 x x
AT90SC9604RU Security Target Lite
64 of 70 General Business Use (13 Feb 07)
TPG0142A
PP Claims
(13 Feb 07) General Business Use 65 of 70
TPG0142A
Section 7
PP Claims
7.1 PP Reference
199 This Security Target Lite is compliant with CC Smartcard Integrated Circuit Protection
Profile PP/9806, Version 2.0, Issue September 1998, and has been registered at the
French Certification Body.
7.2 PP Refinements
200 Refinements to assumptions A.DLV_PROTECT, A.USE_PROD and objectives
O.DLV_PROTECT, O.TEST_OPERATE relate to unsawn wafers and corresponding
procedures and guidance.
7.3 PP Additions
7.3.1 Cryptographic Capability
201 In addition to conforming to PP/9806, this Security Target Lite specifies an additional
Organizational Security Policy P.CRYPTO in Section 3.4. and an additional objective
O.CRYPTO in Section 4.1.
202 The CC security functional requirements to meet this Organizational Security Policy is
Cryptographic Operation (FCS_COP.1), which is specified in Section 5.
203 The security function to satisfy the FCS_COP.1 requirement is SF10 and is specified in
Section 6.
7.3.2 Specification of Management Functions
204 This is an addition to the Security Management Class (FMT)
205 The security functions that satisfy the FMT_SMF.1 requirement are SF1, SF3, SF6 and
SF11. These security functions are described in Section 6.
AT90SC9604RU Security Target Lite
66 of 70 General Business Use (13 Feb 07)
TPG0142A
7.3.3 Analysis and Testing for Insecure States
206 This is an addition to the Assurance Vulnerability class (AVA)
207 The assurance measures that satisfy the AVA_MSU.3 requirement are SA8 and SA9.
These assurance measures are described in Section 6.
7.3.4 Additions to Life Cycle
208 Due to the addition of Package Mode the following functional requirements are now
applicable to not only Phase 3, but also Phases 4-7.
! FIA_UAU.2 - User authentication before any action
! FIA_UID.2 - User Identification before any action
! FIA_ATD.1 - User attribute definition
209 This is due to the control of entry into Package Mode, and also the control of what
authenticated Package Mode user have access to.
210 The security functions that satisfy the FIA_UAU.2 requirements are SF1 and SF11. The
security functions are described in Section 6.
211 The security functions that satisfy the FIA_UID.2 requirements are SF1 and SF11. The
security functions are described in Section 6.
212 The security functions that satisfy the FIA_ATD.1 requirement are SF1, SF2, SF6,
SF11, and SF12. These security functions are described in Section 6.
(13 Feb 07) General Business Use 67 of 70
TPG0142A
Glossary
0.1 Terms
Control Bytes Reserved bytes of EEPROM which can be
programmed with traceability information.
CRC-32 Algorithm used to compute powerful checksum on
memory blocks
HASH Transformation of a string of characters into a usually
shorter fixed length value or key that represents the
original string.
IC Dedicated Software IC Proprietary software which is required for testing
purposes and to implement special functions. For
AT90SC9604RU this includes the embedded test
software and additional test programmes which are
run from outside of the IC.
IC Designer Institution (or its agent) responsible for the IC
Development. Atmel is the institution in respect of the
TOE.
IC Manufacturer Institution (or its agent) responsible for the IC
manufacturing, testing and pre-personalization. Atmel
is the institution in respect of the TOE.
IC Packaging
Manufacturer
Institution (or its agent) responsible for the IC
packaging and testing.
IC Pre-personalization
Data
Required information to enable the smartcard IC to be
configured by means of ROM options and to enable
programming of the EEPROM with customer specified
data.
Integrated Circuit (IC) Electronic component(s) designed to perform
processing and/or memory functions.
Personalizer Institution (or its agent) responsible for the smartcard
personalization and final testing.
Smartcard A credit sized plastic card which has a non volatile
memory and a processing unit embedded within it.
AT90SC9604RU Security Target Lite
68 of 70 General Business Use (13 Feb 07)
TPG0142A
Smartcard Embedded
Software
Software embedded in the smartcard application
(smartcard application software). This software is
provided by smartcard embedded software developer
(customer). Embedded software may be in any part of
User ROM or EEPROM.
Smartcard Embedded
Software Developer
Institution (or its agent) responsible for the smartcard
embedded software development and the
specification of pre-personalization requirements.
Smartcard Issuer Institution (or its agent) responsible for the smartcard
product delivery to the smartcard end-user.
Smartcard Product
Manufacturer
Institution (or its agent) responsible for the smartcard
product finishing process and testing.
Glossary
(13 Feb 07) General Business Use 69 of 70
TPG0142A
0.2 Abbreviations
ACSF Access Control Security Functions
AVR 8-bit RISC processor developed and produced by Atmel
CC Common Criteria
CPU Central Processing Unit
CRC Cyclic Redundancy Check
DES Data Encryption Standard
DPA Differential Power Analysis
EEPROM Electrically Erasable Programmable ROM
FIB Focussed Ion Beam
HCMOS High Speed Complementary Metal Oxide Semiconductor
I/O Input/Output
IC Integrated Circuit
IFCSF Information Flow Control Security Functions
ISO International Standards Organization
LFSR Linear Feedback Shift Register
MAC Master Authentication Key
MCU Microcontroller
NVM Non Volatile Memory
OTP One Time Programmable
PME Package Mode Entry
PMT Package Mode Test
PP Protection Profile
RAM Random-Access Memory
RISC Reduced Instruction Set Core
RNG Random Number Generator
ROM Read-Only Memory
SPA Simple Power Analysis
TD Technical Data
TME Test Mode Entry
AT90SC9604RU Security Target Lite
70 of 70 General Business Use (13 Feb 07)
TPG0142A
TMR Test Mode Run
TOE Target of Evaluation
VFO Variable Frequency Oscillator
Printed on recycled paper.
General Business Use
TPG0142A–SMIC–13Feb07
© Atmel Corporation 2007. All rights reserved. Atmel®
, logo and combinations thereof, Everywhere You Are®
and others, are registered
trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-
TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-
TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
Atmel Corporation Atmel Operations
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Regional Headquarters
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Memory
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
Microcontrollers
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: (33) 2-40-18-18-18
Fax: (33) 2-40-18-19-60
ASIC/ASSP/Smart Cards
Zone Industrielle
13106 Rousset Cedex, France
Tel: (33) 4-42-53-60-00
Fax: (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: (44) 1355-803-000
Fax: (44) 1355-242-743
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: (49) 71-31-67-0
Fax: (49) 71-31-67-2340
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
Literature Requests
www.atmel.com/literature